Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (37)
- Buch (Monographie) (35)
- Wissenschaftlicher Artikel (3)
- Bericht (1)
- Arbeitspapier (1)
Schlagworte
- Fahrzeug (77) (entfernen)
Institut
- Sonstige (77) (entfernen)
Aufgrund der Wichtigkeit individueller Mobilität nutzen viele Menschen heutzutage ein Auto zur Fortbewegung. Hierbei scheint es normal zu sein, neben dem Fahren zusätzliche, nicht fahrbezogene Aktivitäten auszuüben. Obwohl die Fahrzeugführung an sich bereits anspruchsvoll ist und die menschlichen Kognitionsressourcen begrenzt sind, geschehen relativ selten schwere Unfälle. Empirische Studien des fahrergesteuerten Fahrens deuten darauf hin, dass Fahrer Strategien besitzen, die es ihnen ermöglichen, auch im Mehrfachaufgabenkontext eine sichere Fahrleistung zu garantieren: Sie scheinen einen Fahrleistungszielwert zu besitzen, den sie im kontinuierlichen Abgleich mit der aktuellen Fahrleistung versuchen zu erreichen. Darüber hinaus scheinen Fahrer die Bearbeitung nicht fahrbezogener Aufgaben zu reduzieren, sobald sie sich einer kritischen Fahrsituation nähern. In den vergangenen Jahren machte die Entwicklung automatisierter Fahrfunktionen deutliche Fortschritte. Dies führte zu tiefgreifenden Veränderungen der Fahrer-Fahrzeug-Interaktion, da Fahrer im Normalverkehr des automatisierten Fahrens (SAE Level 3) nicht mehr die Verantwortung für die Fahrzeugführung tragen und es ihnen freisteht, sich mit nicht fahrbezogenen Aufgaben zu beschäftigen. Hiervon ausgehend stellt sich die Frage, ob und wenn ja, welche Rolle die Fahrerstrategien im Kontext des automatisierten Fahrens spielen. Das aktuelle Forschungsvorhaben beschäftigt sich mit dieser Thematik: Basierend auf der Idee eines Fahrleistungszielwerts wurden Grenzwerte akzeptierter Fahrleistungsbereiche in Abhängigkeit verschiedener Personen- und Situationsfaktoren bestimmt. Des Weiteren wurde untersucht, inwiefern Fahrern ihre Strategien auch in Übernahmesituationen des automatisierten Fahrens in Abhängigkeit verschiedener Systemkonfigurationen zur Verfügung stehen. Abschließend wurden die Erkenntnisse dieser beiden Schritte zur Ableitung von Gestaltungsempfehlungen für zukünftige automatisierte Systeme genutzt.
The proportion of older road users is increasing because of demographic change (in the group 65+ from current 18% to about 24% by 2030). The mobility needs of people 65+ often differ from those of younger people. Seniors (65+) are already more involved in fatal accidents than younger road users. According to the age development, the senior share of road deaths in the EU of today is increasing nearly one-fifth to one-third. From the in-depth analysis of accidents generic simulation models were developed. Attention has been paid both to psycho-physical characteristics as well as on the social and physical environment and their specifics in conjunction with seniors. By simulating the defined scenarios and varying the defined relevant parameters, accident influencing factors were examined as a basis for avoidance. In addition, the parameters were varied to show the influence from the vehicle, the pedestrian and the infrastructure to avoid the accident or to characterize the conditions for which the accident is inevitable.
Causation of traffic accidents with children from the perspective of all involved participants
(2017)
In the year 2014 about 2,800 children between zero and 14 years got injured due to traffic accidents in Austria. More than 50% were taking part in traffic as active road users like cyclists or pedestrians. Within this study 46 real world traffic accidents between vehicles and children as pedestrians were analysed. In 39 cases, car drivers hit the crossing children. In the other cases, the collision opponents were busses, trucks or motorcycles. Most of the children got hit while crossing a road at urban sites. By analysing the traffic accidents from the perspectives of all involved participants, vehicle drivers and injured children, it is possible to identify factors for each participant, which led to the accident and factors that contributed the accident. The main task is to find patterns in the behaviour of crash victims (children and driver) before the collision. One important fact is that in more than 50% of the analysed cases sight obstructions were an important contributing factor for both, the driver and the child. From drivers view situations in which the child moved unexpected into the driven road lane were often found. For the injured child, factors like: no attention to the road traffic or no sufficient traffic observation were found to be relevant. Further it- possible to sensitise children and adults to possible source of critical traffic situations according to the findings of this study.
Die Schwerpunkte dieses Projekts lagen in der Untersuchung der Fahrerverfügbarkeit und Müdigkeit sowie in der Herstellung natürlichen Verhaltens bei längeren hochautomatisierten Fahrten. Es konnte im Rahmen von zwei Fahrsimulationsversuchen mit 15 und 42 Probanden gezeigt werden, dass bei hochautomatisierten Fahrten von 60 Minuten Müdigkeit auftreten kann, bei Ausprägung und Zeitpunkt des Auftretens jedoch große individuelle Unterschiede bestehen. Da eine zu kleine Stichprobe sich zum Zeitpunkt der Übernahme in einem entsprechend müden Zustand befand, kann die Auswirkung von Müdigkeit auf das Übernahmeverhalten nicht abschließend beurteilt werden. Hierfür empfehlen sich für die Zukunft Studien mit einem zustandsabhängigen Versuchsdesign. Der Einsatz von natürlichen fahrfremden Tätigkeiten, mit denen die Probanden sich frei beschäftigen durften, zeigte sowohl in der Probandstudie im Fahrsimulator als auch bei einem Expertenworkshop im Realfahrzeug eine hohe Involviertheit der Probanden in die Tätigkeiten während der gesamten 60 Minuten hochautomatisierten Fahrens. Es wird vermutet, dass dies auf die hohe intrinsische Motivation und den hohen Unterhaltungswert der selbstgewählten Aktivitäten zurückzuführen ist. Es zeigte sich außerdem, dass die Wahl der Tätigkeit vom Alter der Probanden abhängig ist. Eine Fahrtdauer von 60 Minuten wurde aufgrund der Ergebnisse aus allen drei Versuchen als realistisches Zukunftsszenario eingestuft und besitzt daher eine hohe Relevanz. Sowohl für die Bewertung von Müdigkeit als auch von Ablenkung war das Blickverhalten am meisten aufschlussreich. Für die Bewertung von Müdigkeit während der Beschäftigung mit fahrfremden Tätigkeiten wird jedoch ein kopfbasiertes Blickerfassungssystem, welches in der Lage ist, den Augenöffnungsgrad zu erfassen, oder videobasierte Verhaltensbeobachtung empfohlen.
The incidence of side impacts was investigated from GIDAS data. Both vehicle-fixed object and vehicle-vehicle collisions were analysed as these are enclosed within the consumer testing program. Vehicle-fixed object collisions were stratified according to ESC availability. Results indicated that vehicles equipped with ESC rarely have pure-lateral impacts. An increase in oblique collisions was seen for the vehicles with ESC whereby most vehicle were driving in left curves. The analysis of vehicle-vehicle collisions developed injury risk curves were developed at the AIS3+ injury severity for the vehicle-vehicle side impacts. Results suggested that greatest injury risk occurred when a Pre Euro NCAP vehicle was struck by a Post Euro-NCAP vehicle. The remaining curves did not show different behaviour, indicating that stiffness increased have been equally combated. This was attributable to the few Post Euro-NCAP vehicles that had a deployed curtain airbag available in the sample. The integration of Euro NCAP testing has shown to improve vehicle crashworthiness for pole collisions, as those vehicles with ESC rarely incur lateral impacts.
Injury probability functions for pedestrians and bicyclists based on real-world accident data
(2017)
The paper is focusing on the modelling of injury severity probabilities, often called as Injury Risk Functions (IRF). These are mathematical functions describing the probability for a defined population and for possible explanatory factors (variables) to sustain a certain injury severity. Injury risk functions are becoming more and more important as basis for the assessment of automotive safety systems. They contribute to the understanding of injury mechanisms, (prospective) evaluation of safety systems and definition of protection criteria or are used within regulation and/or consumer ratings. In all cases, knowledge about the correlation between mechanical behavior and injury severity is needed. IRFs are often based on biomechanical data. This paper is focusing on the derivation of injury probability models from real world accident data of the GIDAS database (German In-depth Accident Study). In contrast to most academic terms there is no explicit term definition or definition of creation processes existing for injury probability models based on empirical data. Different approaches are existing for such kind of models in the field of accident research. There is a need for harmonization in terms of the used methods and data as well as the handling with the existing challenges. These are preparation of the dataset, model assumptions, censored/unknown data, evaluation of model accuracy, definition of dependent and independent variable, and others. In the presented study, several empirical, statistical and phenomenological approaches were analyzed regarding their advantages and disadvantages and also their applicability. Furthermore, the identification of appropriate prediction parameters for the injury severity of pedestrians has been considered. Due to its main effect on injuries of pedestrians and bicyclists, the importance of the secondary impact has also been analyzed. Finally, the model accuracy, evaluated by several criteria, is the rating factor that gives the quality and reliability for application of the resulting models. After the investigation and evaluation of statistical approaches one method was chosen and appropriate prediction variables were examined. Finally, all findings were summarized and injury risk functions for pedestrians in real world accidents were created. Additionally, the paper gives instructions for the interpretation and usage of such functions. The presented results include IRFs for several injury severity levels and age groups. The presented models are based on a high amount of real world accidents and describe very well the injury severity probability of pedestrians and bicyclists in frontal collisions with current vehicles. The functions can serve as basis for the evaluation of effectiveness of systems like Pedestrian-AEB or Bicycle-AEB.
In der Delegierten Verordnung (EU) 2015/962 (Europäische Kommission, 2015) wird von den Mitgliedsstaaten neben der Einrichtung nationaler Zugangspunkte zu Straßen- und Verkehrsdaten auch die gemeinsame Definition von Datenqualitätsindikatoren und Methoden zur Qualitätsbewertung und -kontrolle der verschiedenen Datenarten gefordert. Ziel dieses Projektes war es daher, ein Qualitätsmanagementsystems (QMS) für die Erfassung und Weiterverarbeitung von Daten für IVS-Dienste zu entwickeln und für die Datenarten Baustelleninformationen und Reisezeitinformationen zu spezifizieren. Dazu wurden - der Stand der Wissenschaft und Technik recherchiert, - Kriterien, Kenngrößen und Verfahren zur Messung der Qualität von Baustellen- und Reisezeitinformationen definiert, - ein organisatorischer Rahmen für ein Qualitätsmanagement erstellt, - ein Prozess zur Zertifizierung von bei Organisationen (i. d. R. Datengebern) eingeführten QMS entwickelt und - ein Leitfaden erstellt, der die Organisationen bei der Einführung und Anwendung eines QMS helfen soll. Durch die Einführung, Anwendung und regelmäßige Prüfung des im Rahmen dieses Projektes entwickelten und im zugehörigen Leitfaden beschriebenen QMS kann seitens der Datengeber ein Großteil der im Rahmen des Projektes identifizierten Probleme erkannt und behoben werden. Wesentliche Maßnahmen sind dabei, - die eindeutige Übertragung der Verantwortung für die Qualität der bereitgestellten Informationen auf die Datengeber, - die Bereitstellung (Finanzierung), regelmäßige Schulung und Motivation von zuständigem Personal mit ausreichendem Zeitbudget, - die bereits begonnene Überarbeitung der DATEX- II-Profile, - die Bereitstellung DATEX-II-Profilkonformer Systeme zur Eingabe und Übertragung der Meldungen und - die Lieferung von Qualitätskenngrößen mit den Informationen.