Sonstige
Filtern
Erscheinungsjahr
- 2007 (41) (entfernen)
Sprache
- Englisch (41) (entfernen)
Schlagworte
- Conference (36)
- Konferenz (36)
- Accident (18)
- Unfall (17)
- Statistics (16)
- Schweregrad (Unfall, Verletzung) (15)
- Severity (accid, injury) (15)
- Statistik (14)
- Analyse (math) (13)
- Data acquisition (13)
- Datenerfassung (13)
- Injury (12)
- Tödlicher Unfall (11)
- Verletzung (11)
- Analysis (math) (10)
- Fatality (10)
- Accident prevention (8)
- Safety (8)
- Sicherheit (8)
- Fußgänger (7)
- Pedestrian (7)
- Unfallverhütung (7)
- Cause (6)
- Data bank (6)
- Datenbank (6)
- Simulation (6)
- Ursache (6)
- Anfahrversuch (5)
- Car (5)
- Child (5)
- Frontalzusammenstoß (5)
- Germany (5)
- Head on collision (5)
- Kind (5)
- PKW (5)
- Reconstruction (accid) (5)
- Unfallrekonstruktion (5)
- Bein (menschl) (4)
- Bewertung (4)
- Deutschland (4)
- Europa (4)
- Europe (4)
- Evaluation (assessment) (4)
- Fahrzeug (4)
- Impact test (veh) (4)
- Leg (human) (4)
- Motorcyclist (4)
- Motorradfahrer (4)
- Passive safety system (4)
- Passives Sicherheitssystem (4)
- Safety belt (4)
- Seitlicher Zusammenstoß (4)
- Sicherheitsgurt (4)
- Side impact (4)
- Vehicle (4)
- Age (3)
- Airbag (3)
- Alter (3)
- Benutzung (3)
- Biomechanics (3)
- Biomechanik (3)
- Cyclist (3)
- Driver (3)
- Fahrer (3)
- Human body (3)
- Knee (human) (3)
- Knie (menschl) (3)
- Leistungsfähigkeit (allg) (3)
- Mathematical model (3)
- Menschlicher Körper (3)
- On the spot accident investigation (3)
- Prüfverfahren (3)
- Radfahrer (3)
- Rechenmodell (3)
- Risikobewertung (3)
- Test method (3)
- Untersuchung am Unfallort (3)
- Use (3)
- Vehicle occupant (3)
- Active safety system (2)
- Adolescent (2)
- Air bag (restraint system) (2)
- Anthropometric dummy (2)
- Auffahrunfall (2)
- Brustkorb (2)
- China (2)
- Collision (2)
- Crash helmet (2)
- Deformable barrier (impact test) (2)
- Development (2)
- Dummy (2)
- Efficiency (2)
- Eins (2)
- Electronic stability program (2)
- Entwicklung (2)
- Fahrzeuginnenraum (2)
- Forschungsarbeit (2)
- Front (2)
- Geschwindigkeit (2)
- Insasse (2)
- Interior (veh) (2)
- Interview (2)
- Japan (2)
- Jugendlicher (2)
- Kopf (2)
- Method (2)
- Motorcycle (2)
- Motorrad (2)
- One (2)
- Overturning (veh) (2)
- Rear end collision (2)
- Reproducibility (2)
- Reproduzierbarkeit (2)
- Risiko (2)
- Risk assessment (2)
- Schutzhelm (2)
- Seite (2)
- Side (2)
- Speed (2)
- USA (2)
- Verfahren (2)
- Zusammenstoß (2)
- injury) (2)
- Überschlagen (2)
- Accident rate (1)
- Airbag (restraint system) (1)
- Aktives Sicherheitssystem (1)
- Anti locking device (1)
- Antiblockiereinrichtung (1)
- Attitude (psychol) (1)
- Audit (1)
- Austria (1)
- Belastung (1)
- Bicycle (1)
- Cervical vertebrae (1)
- Colthing (1)
- Cross roads (1)
- Cycle track (1)
- Decrease (1)
- Deformierbare Barriere (Anpralltest) (1)
- Deformierte Barriere (Anpralltest) (1)
- Delivery vehicle (1)
- Deutschalnd (1)
- Driver information (1)
- Driver training (1)
- Drunkenness (1)
- Dtetection (1)
- Einstellung (psychol) (1)
- Electronic driving aid (1)
- Elektronisches Stabilitätsprogram (1)
- Elektronisches Stabilitätsprogramm (1)
- Entdeckung (1)
- Error (1)
- Fahrausbildung (1)
- Fahrerassistenzsystem (1)
- Fahrrad (1)
- Fahrzeugsitz (1)
- Fehler (1)
- Finland (1)
- Finnland (1)
- France (1)
- Frankreich (1)
- Frau (1)
- Geländefahrzeug (1)
- Geschwindigkeitsbeschränkung (1)
- Gesetzgebung (1)
- Halswirbel (1)
- Head (1)
- Head restraint (1)
- Highway design (1)
- Human factor (1)
- Impact test (1)
- Improvement (1)
- Ireland (1)
- Irland (1)
- Junction (1)
- Kleidung (1)
- Knotenpunkt (1)
- Kontrolle (1)
- Kopfstütze (1)
- Kreuzung (1)
- Legislation (1)
- Lieferfahrzeug (1)
- Load (1)
- Lorry (1)
- Man (1)
- Mann (1)
- Menschlicher Faktor (1)
- Modification (1)
- Overlapping (1)
- Perception (1)
- Pfahl (1)
- Pile (1)
- Planning (1)
- Planung (1)
- Policy (1)
- Politik (1)
- Radweg (1)
- Regression analysis (1)
- Regressionsanalyse (1)
- Research project (1)
- Research projekt (1)
- Risk (1)
- Road network (1)
- Rsk (1)
- Safety fence (1)
- Schutz (1)
- Schutzeinrichtung (1)
- Schweden (1)
- Schweregrad (Unfall (1)
- Seat (veh) (1)
- Sensor (1)
- Severity (accid (1)
- Sichtbarkeit (1)
- Speed limit (1)
- Spinal calum (1)
- Sport utility vehicle (1)
- Stand der Technik (Bericht) (1)
- Standardisierung (1)
- Standardization (1)
- State of the art report (1)
- Statistik (math) (1)
- Steifigkeit (1)
- Stiffness (1)
- Straßenentwurf (1)
- Straßennetz (1)
- Surveillance (1)
- Thorax (1)
- Traffic restraint (1)
- Trunkenheit (1)
- Unfallhäufigkeit (1)
- Unfallverhütug (1)
- United Kingdom (1)
- Variance analysis (1)
- Varianzanalyse (1)
- Verbesserung (1)
- Vereinigtes Königreichl (1)
- Verkehrsbeschränkung (1)
- Verletzung) (1)
- Verminderung (1)
- Veränderung (1)
- Sichtbarkeit (1)
- Vorn (1)
- Vorne (1)
- Wahrnehmung (1)
- Wirbelsäule (1)
- Woman (1)
- efficiency (1)
- fatality (1)
- head (1)
- Österreich (1)
- Überlappung (1)
Institut
- Sonstige (41)
- Abteilung Fahrzeugtechnik (4)
A legform impactor with biofidelic characteristics (FlexPLI) which is being developed by the Japanese Automobile Research Institute (JARI) is being considered as a test tool for legislation within a proposed Global Technical Regulation on pedestrian protection (UNECE, 2006) and therefore being evaluated by the Technical Evaluation Group (TEG) of GRSP. In previous built levels it already showed good test results on real cars as well as under idealised test conditions but also revealed further need for improvement. A research study at the Federal Highway Research Institute (BASt) deals with the question on how leg injury risks of modern car fronts can be revealed, reflected and assessed by the FlexPLI and how the impactor can be used and implemented as a legislative instrument for the type approval of cars according to current and future legislations on pedestrian protection. The latest impactor built level (GTα ) is being evaluated by a general review and assessment of the certification procedure, the knee joint biofidelity and the currently proposed injury criteria. Furthermore, the usability, robustness and durability as a test tool for legislation is examined and an assessment of leg injuries is made by a series of tests with the FlexPLI on real cars with modern car front shapes as well as under idealised test conditions. Finally, a comparison is made between the FlexPLI and the current european legislation tool, the legform impactor according to EEVC WG 17.
The use of proper child restraint systems (CRS) is mandatory for children travelling in cars in most countries of the world. The analysis of the quantity of restrained children shows that more than 90% of the children in Germany are restrained. Looking at the quality of the protection, a large discrepancy between restrained and well protected children can be seen. Two out of three children in Germany are not properly restrained. In addition, considerable difference exists with respect to the technical performance of CRS. For that reason investigations and optimisations on two different topics are necessary: The technical improvement of CRS and the ease of use of CRS. Consideration of the knowledge gained by the comparison of different CRS in crash tests would lead to some improvements of the CRS. But improvement of child safety is not only a technical issue. People should use CRS in the correct way. Misuse and incorrect handling could lead to less safety than correct usage of a poor CRS. For that reason new technical issues are necessary to improve the child safety AND the ease of use. Only the combination of both parts can significantly increase child safety. For the assessment of the safety level of common CRS, frontal and lateral sled tests simulating different severity levels were conducted comparing pairs of CRS which were felt to be good and CRS which were felt to be poor. The safety of some CRS is currently at a high level. All well known products were not damaged in the performed tests. The performance of non-branded CRS was mostly worse than that of the well known products. Although the branded child restraint systems already show a high safety level it is still possible to further improve their technical performance as demonstrated with a baby shell and a harness type CRS.
At the 2005 ESV conference, the International Harmonisation of Research Activities (IHRA) side impact working group proposed a 4 part draft test procedure, to form the basis of harmonisation of regulation world-wide and to help advances in car occupant protection. This paper presents the work performed by a European Commission 6th framework project, called APROSYS, an further development and evaluation of the proposed procedure from a European perspective. The 4 parts of the proposed procedure are: - A Mobile Deformable Barrier test; - An oblique Pole side impact test; - Interior headform tests; - Side Out of Position (OOP) tests. Full scale test and modelling work to develop the Advanced European Mobile Deformable Barrier (AE-MDB) further is described, resulting in a recommendation to revise the barrier face to include a bumper beam element. An evaluation of oblique and perpendicular pole tests was made from tests and numerical simulations using ES-2 and WorldSID 50th percentile dummies. It was concluded that an oblique pole test is feasible but that a perpendicular test would be preferable for Europe. The interior headform test protocol was evaluated to assess its repeatability and reproducibility and to solve issues such as the head impact angle and limitation zones. Recommendations for updates to the test protocol are made. Out-of-position (OOP) tests applicable for the European situation were performed, which included additional tests with Child Restraint Systems (CRS) which use is mandatory in Europe. It was concluded that the proposed IHRA OOP tests do cover the worst case situations, but the current test protocol is not ready for regulatory use.
The PDB, BASt and Opel conducted two test series to evaluate possible effects on the results obtained using the EEVC WG17 Lower Legform Impactor as a test tool for the assessment of pedestrian safety. The reproducibility and repeatability of the test results were assessed using six legform impactors while keeping the test parameters constant. In the second series one impactor was used and the test parameters were varied to assess the effects on the readings of the legform. The test parameters were velocity, temperature, relative humidity, the point of first contact regarding the deviation in z-direction and the deviations of the pitch, roll and yaw angle. The tests were performed using an inverse setup, i.e. the legform was hit by a guided linear impactor equipped with a honeycomb deformation element. This setup was chosen to be able to vary each single parameter while avoiding variations of the other test parameters at the same time. The test parameters were varied stronger than allowed in regulatory use in order to determine possible dependencies between the parameters and the readings which were acceleration, bending angle and shear displacement.
The National Roads Authority in Ireland is responsible for planning and supervision of construction and maintenance works on the National Road network. Its primary function is "to secure the provision of a safe and efficient network of national roads". The population of Ireland has grown rapidly from 3.5 million to 4 million within the past 10 years, and vehicle ownership has also risen rapidly to 2 million vehicles, with 2.2 million drivers. Collisions rates in Ireland are at approximately 1.5 collisions per 1,000 population (in 2002), and 8.4 deaths per 1,000,000 population (in 2003). This ranked 8th out of the 15 countries in the European Union at the time. Ireland- current Road Safety Strategy includes Engineering Targets. These are to complete construction of certain lengths of new motorway, dual carriageway and 2+1 highway, to implement a certain number of accident remedial and traffic calming schemes, and to implement road safety audit on all new schemes. The accident remedial schemes, traffic calming schemes, and road safety audit are all the responsibility of the Road Safety section of NRA. The road safety programme of the NRA is divided into four main areas; a) accident remedial measures at individual sites, b) accident remedial treatment of entire routes, c) traffic calming of towns and villages on main roads, d) road safety audit. Examples of these measures are described. Evaluation of past programmes of single site accident remedial measures show a reduction in collision occurrence at these sites, but the effectiveness and the economic rate of return is decreasing over successive programmes. A similar programme has now been adopted on the rest of the country- road network, on regional and local roads. The programme of remedial treatment of entire routes has only recently started and has not been evaluated. Evaluation of the first programme of traffic calming of towns and villages shows an overall decrease in collisions and their severity, and a small reduction in speed. Road Safety Audit, examining new schemes a number of times during design and after construction, has been standard procedure on the national road network for nearly 6 years. An evaluation is currently underway.
Before 2002, France was in the queue of Europeans countries in terms of road safety results because of the low density of population and the faulty behaviour of French due itself to a very low level of traffic law enforcement Even if there were signs of the change of mind in France towards road safety before, the turning point was in summer 2002, when the President declared road safety as a priority work during his mandate. The more symbolic measure was the decision to settle an automatic speed control system (700 fixed and 300 mobile). Over three years, the average speed on French roads decreased by 5 km/h and the number of fatalities on road turned down from an average of 8000 deaths per year to 5 300, which represents a decrease of more than 34 %. For the next months, we anticipate that, as many drivers have kept loosing points on their driving licence through light speed violations, this will lead drivers to check their speed and the speed limits more systematically as loosing points on one's driving license has longer time effects than paying a fine. Consequently, we expect a decrease of 10 % to 15% of fatalities in 2006, which is a very good result if we compare with the trend of the last twenty five years (about 2,3 %). The reverse effect of this system that lies on the changes of behaviour of the majority is that, there is more and more discontent against the system taking into account that automatic speed control system allows only a minor tolerance above limits and that local speed limits are not always adapted to local infrastructure and traffic conditions. Another weakness of the system is that motorcyclists are too rarely caught by the system; the system is being gradually improved by placing the new speed cameras in position of taking photographs of the back of the vehicle. But this would not be sufficient to reduce the speed of motorcyclists that are a very high risk group (16% of fatalities for 0,8 % of traffic) For alcohol, there is no easy route for progress: all what is done nowadays is toward festive impaired driving (through designating sober drivers or mass alcohol preventive screenings) although there is not enough done towards chronic alcoholic driving.
Motorcycle safety research
(2007)
Honda- global motorcycle sales exceeded the 10 million units mark since 2004, and further expansion is expected. As a responsibility for a company to provide mobility, Honda is focusing on motorcycle safety as top priority and has been working on various activities for both aspects of hardware and software. Here, we present Honda- activity for the safety technology of motorcycles. At present, Honda is promoting motorcycle safety in the four themes of prevention and collision safety such as safety education, recognition assistance, accident prevention and injury reduction. First, in the area of the safety education, the "Honda Safety Driving Promotion Center" was established in 1970, and motorcycle riders and vehicle driver trainings have been organized, and the traffic training centers are used as an actual practice field not only in Japan but also in many other regions in the world. Through our training activities, the new area of safety training with hardware assistance was developed and Honda- unique technology was accumulated such as the riding simulator which can provide experience of potentially dangerous situations without risk. Especially, the "riding trainer", the popular version of the riding simulator, was introduced at several motor shows in various countries and launched in September 2005. It was distributed first in Europe and is expected to expand globally aiming at 3000 units worldwide.. And in Europe, the newest version, which includes the suburban roads program, jointly developed with ADAC, will be released in near future. In the area of recognition assistance, "vehicle to vehicle communication technology" is under development using the advantage of being a manufacturer of both motorcycles and cars. This technology is under research as Honda "ASV-3" in Japan, and as part of C2C activity in Europe. As for the accident prevention, advanced brake systems for motorcycles to assist more effective brake operation have been expanded, Honda signed the European Road Safety Charter in April 2004 with the advanced brake systems commitment and furthermore, they are expanding according to vehicle characteristics and region. Then all models above 250 cc will have a version of the system by 2010. And as the last theme, "motorcycle airbag system" is introduced which is equipped on a mass production motorcycle for the first time in the world. It has been researched and developed for a long time as an injury reduction technology for collision accidents. Honda automobile technology was used for the research and development of the motorcycle airbag, and many specific issues such as the analysis of the collision conditions particular to motorcycles have been solved to realize today- success. It might be known that ADAC in-house crash test held in August this year confirmed the high effectiveness of the airbag system and showed a positive result. This motorcycle airbag system is equipped to the Honda Gold Wing and launched in North America in August, 2006. Also in Europe, it will be sold by the end of this year. Each theme of Honda motorcycle safety technology can be seen at the Honda booth.
Automotive Engineering, Mechanical Engineering and TechnologyrnAbstract: The degrees of injury severity, as a rule injuries scaled by AIS of specific regions of the human body, investigated out of road traffic accidents correspond to the body-specific loading values, which are found out with the aid of experimental or mathematical simulation of crash tests with motor vehicles or with sled tests. The coherence between the injured human being on the one hand and the physical and the theoretical model respectively on the other hand is established by the risk function, which describes the probability of degrees of injury severity in dependence on the protection criteria. Due to the different physical characteristics in the simulation, e.g. accelerations, forces, compressions and their velocity, the compilation of these quantities, comparable to the MAIS, the maximal occurred single AIS obtained in accident analysis is much more difficult in the simulation than in the accident occurrence. Therefore it is obvious to normalize the loading values gained out of simulation and to summarise them to an entire value in a suitable manner, the safety index.rn
The fact that ADAC Air Rescue handles approximately 4,000 road accident missions every year gave rise to set up an accident research programme for which ADAC Air Rescue provides its data. This data is of initial informational quality and will be supplemented by data from the police, experts, fire brigades as well as hospitals and forensic institutes. Although the number of cases is still rather low, certain tendencies can be identified. The causes for most accidents occur when joining or intersecting traffic, followed by speeding in road bends and tailgating. Many accidents involve HGV rear end collisions, often causing serious injuries, considerable damage and technical problems for the rescue operations. With regard to the various impact types, it has become obvious that most of the extremely serious injuries are inflicted during a passenger car side impact. In addition, access to and removal of trapped passengers is becoming more and more complicated, partly due to the increasing use of high-strength materials, and rescue operations tend to be more time consuming.
Bicyclists are minimally or unprotected road users. Their vulnerability results in a high injury risk despite their relatively low own speed. However, the actual injury situation of bicyclists has not been investigated very well so far. The purpose of this study was to analyze the actual injury situation of bicyclists in Germany to create a basis for effective preventive measures. Technical and medical data were prospectively collected shortly after the accident at the accident scenes and medical institutions providing care for the injured. Data of injured bicyclists from 1985 to 2003 were analyzed for the following parameters: collision opponent, collision type, collision speed (km/h), Abbreviated Injury Scale (AIS), Maximum AIS (MAIS), incidence of polytrauma (Injury Severity Score >16), incidence of death (death before end of first hospital stay). 4,264 injured bicyclists were included. 55% were male and 45% female. The age was grouped to preschool age in 0.9%, 6 to 12 years in 10.8%, 13 to 17 years in 10.4%, 18 to 64 years in 64.7%, and over 64 years in 13.2%. The MAIS was 1 in 78.8%, 2 in 17.0%, 3 in 3.0%, 4 in 0.6%, 5 in 0.4%, and 6 in 0.2%. The incidence of polytrauma was 0.9%, and the incidence of death was 0.5%. The incidence of injuries to different body regions was as follows: head, 47.8%; neck, 5.2%, thorax, 21%; upper extremities, 46.3%; abdomen, 5.8%; pelvis, 11.5%, lower extremities, 62.1%. The accident location was urban in 95.2%, and rural in 4.8%. The accidents happened during daylight in 82.4%, during night in 12.2%, and during dawn/dusk in 5.3%. The road situation was as follows: straight, 27.3%; bend, 3.0%; junction, 32.0%; crossing, 26.4%; gate, 5.9%; others, 5.4%. The collision opponents were cars in 65.8%, trucks in 7.2%, bicycles in 7.4%, standing objects in 8.8%, multiple objects in 4.3%, and others in 6.5%. The collision speed was grouped <31 in 77.9%, 31-50 in 4.9%, 51-70 in 3.7%, and >70 in 1.5%. The helmet use rate was 1.5%. 68% of the registered head injuries were located in the effective helmet protection area. In bicyclists, head and extremities are at high risk for injuries. The helmet use rate is unsatisfactorily low. Remarkably, two thirds of the head injuries could have been prevented by helmets. Accidents are concentrated to crossings, junctions and gates. A significant lower mean injury severity was observed in victims using separate bicycle lanes. These results do strongly support the extension or addition of bicycle lanes and their consequent use. However, the lanes are frequently interrupted at crossings and junctions. This emphasizes also the important endangering of bicyclists coming from crossings, junctions and gates, i.e. all situations in which contact of bicyclists to motorized vehicles is possible. Redesigning junctions and bicycle traffic lanes to minimize the possibility of this dangerous contact would be preventive measures. A more consequent helmet use and use and an extension of bicycle paths for a better separation of bicyclists and motorized vehicle would be simple but very effective preventive measures.