Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (386)
- Konferenzveröffentlichung (149)
- Bericht (15)
- Wissenschaftlicher Artikel (14)
- Arbeitspapier (7)
- Teil eines Buches (Kapitel) (3)
Schlagworte
- Deutschland (574) (entfernen)
Institut
- Sonstige (574) (entfernen)
The project UR:BAN "Cognitive assistance (KA)" aims at developing future assistance systems providing improved performance in complex city traffic. New state-of-the-art panoramic sensor technologies now allow comprehensive monitoring and evaluation of the vehicle environment. In order to improve protection of vulnerable road users such as pedestrians and cyclists, a particular objective of UR:BAN is the evaluation and prediction of their behaviour and actions. The objective of subproject "WER" is development support by providing quantitative estimates of traffic collisions at the very start and predict potential in terms of optimized accident avoidance and reduction of injury severity. For this purpose an integrated computer simulation toolkit is being devised based on real world accidents (GIDAS as well as video documented accidents), allowing the prediction of potential effectiveness and future benefit of assistance systems in this accident scenario. Subsequently, this toolkit may be used for optimizing the design of implemented assistance systems for improved effectiveness.
Within the overall system of novice driver preparation, the practical driving test plays an especially important role for the objective of improved driving safety: On the one hand, the test contents, assessment criteria and test results provide important orientation for the organisation of driving school training and the individual learning processes of the novice drivers (control function); on the other hand, the practical test serves to ensure that only novice drivers with adequate driving competence are entitled to participate in motorised road traffic (selection function). The aim of the present project is to elaborate a scientifically founded model for a future, optimised practical driving test, together with a contextual and methodical (implementation) concept for its continuous maintenance, quality assurance and further development. In addition, the institutional structures of the test system, test methods and test procedures - including the necessary demand, assessment, documentation and evaluation standards - are to be described in a "System Manual on Driver Licensing (Practical Test)". As a first step, selected psychology-based driving competence models and the contents of training and test documents are to be analysed. The results of this analysis will then serve as the starting point for a discussion of possibilities to model and measure driving competence, and for the outlining of a driving competence model for the theoretical determination of appropriate test content. Subsequently, demand standards for an optimised practical driving test can be derived by applying action theory principles to the demands of motor vehicle handling, and thereby defined as minimum personal standards for driving test candidates. This elaboration is to take into account not only latest knowledge from the fields of traffic and test psychology, but also relevant stipulations in licensing regulations, international trends in the further development of test standards, and novice-specific accident causes and competence deficits. A further outcome of the project - alongside theoretical-methodical foundations for optimisation of the practical driving test and for the draft of a system manual - is to be a "Catalogue of driving tasks (Category B)", in which the demand standards for the practical driving test are described in the form of situation-related driving tasks and situation-independent observation categories, as a means to specify the criteria for event-oriented performance assessment and overall competence evaluation. At the same time, criteria for the examiner's test decision are to be defined. This optimisation work will contribute, finally, to further development of the adaptive control strategy for the practical driving test. To enable implementation of the further developed demand, assessment and documentation standards of an optimised practical driving test, a contextual and methodical concept for an electronic test report is to be presented, together with an ergonomically founded design proposal for both hardware and software. The computer-assisted documentation of test performance is intended to support the driving test examiner in planning of the course of a driving test and assessment of the candidate's driving behaviour. Furthermore, optimisation of the performance feedback to candidates and improved possibilities for scientific evaluation of the optimised practical driving test are expected. With regard to test evaluation, a fundamental model is to be described, which - alongside monitoring of the psychometric quality criteria within the framework of an instrumental evaluation - incorporates an evaluation of test results, product audits and the responses to candidate and driving instructor surveys. Finally, the possible influence of driver assistance and accident avoidance systems on the realisation of a driving test and on the assessment of test performance is to be discussed.
Bereits vor rund zwanzig Jahren wurde die Entwicklung einer bundeslandübergreifenden Erhaltungsstrategie für Verkehrsflächen und Ingenieurbauwerke auf Netzebene angegangen. Zwischenzeitlich sind hierfür Erfassungs- und Bewertungsverfahren erarbeitet worden und in Betrieb. Aufbauend auf den guten Erfahrungen, die mit den bestehenden Managementsystemen gemacht wurden, erscheint es somit folgerichtig für die bislang vernachlässigten sonstigen Anlagenteile der Straße ein eigenständiges Asset Management zu entwickeln. Um die hierfür notwendige Datengrundlage zu schaffen, wurde in dem vorliegenden Forschungsprojekt mittels Literaturrecherche und bundesweiter Befragung von Verantwortlichen Erhaltungskostensätze, Nutzungsdauern sowie Ausstattungsquoten für die sonstigen Anlagenteile " beispielsweise Lichtsignalanlagen oder Schutzeinrichtungen " erhoben. Die Ergebnisse der Umfrage fußten in der Festlegung von für ein Asset Management relevanten sonstigen Anlagenteile sowie einer Untergliederung dieser in einzelne Aggregate. An den jeweiligen Anlagenteilen/Aggregaten konnten dann Leistungen der Instandhaltung, Instandsetzung und Erneuerung definiert werden, die in Kombination mit den Nutzungsdauern und den Ausstattungsquoten eine Kalkulation der benötigten finanziellen Aufwendungen für die Erhaltung der sonstigen Anlagenteile ermöglichen. Weiterer Forschungsbedarf besteht von allem bei der Verbesserung und Verdichtung der Datengrundlage sowie die Umsetzung in einem Computer-Programm nach dem Prinzip des PMS und BMS.
Intelligente Bauwerke - Anforderungen an die Aufbereitung von Messgrößen und ihrer Darstellungsform
(2015)
Ziel des Forschungsvorhabens FE 15.0548/2011/GRB war die Ausarbeitung einer Konzeption zu Anforderungen an die Aufbereitung und Verarbeitung von Messgrößen und ihrer Darstellung. Dies beinhaltete die Evaluierung und Entwicklung verschiedener modellbasierter und statistischer Analyseverfahren, die über den bisherigen Stand der Technik der Bauwerksüberwachung hinausgehen. Der Nutzen liegt in der Herausfilterung relevanter Informationen aus umfangreichem Datenmaterial (Vor-Aggregation) sowie der Erzeugung von belastbaren Zustandsinformationen bzw. Vorergebnissen hierzu durch eine frühzeitige, leistungsfähige Plausibilisierung. Es wurde gezeigt, dass durch den Einsatz von leistungsfähigen, gedächtnisbehafteten, selbstlernenden Algorithmen für die Sensorfusion, Interpolation, Plausibilitätserhöhung und Treffen fachtechnischer Monitoringaussagen Ergebnisse erzielt werden können, die bezüglich der Verarbeitung von Mess- und Erfassungsdaten weit über den aktuellen Stand beim Brückenmonitoring hinausgehen. Anhand mehrerer Szenarien, für die reale Erfassungsdaten zur Verfügung standen, wurde gezeigt, dass diese Verfahren sehr zuverlässig verschiedenste Signalstörungen, wie Messausreisser, erhöhtes Rauschen und Brummeinstreuung erkennen können. Nur durch die frühzeitige und zuverlässige Plausibilisierung von Sensordaten von Brückenbauwerken kann verhindert werden, dass offensichtlich fehlerhafte Messwerte (wie z.B. Messausreisser, störungsbehaftete Messungen) zu falschen Vorhersagen der Systemzuverlässigkeit von Brückenbauwerken durch rechnergestützte Systemmodelle führen.
Diese Studie befasst sich mit CO2-Reduktionspotenzialen von schweren Nutzfahrzeugen. In einer Literaturrecherche wurden zunächst Sattelzüge, Verteiler-Lkw, Busse im Stadtverkehr sowie Reisebusse betrachtet. Ziel war es, technische Möglichkeiten zur Reduzierung von CO2-Emissionen für die ausgewählten Fahrzeugkategorien zu ermitteln und deren Einsparpotentiale über die jeweiligen Einsatzarten aufzuschlüsseln. Dabei zeigten sich weitestgehend ungenutzte Einsparmöglichkeiten, beispielsweise durch Fahrwiderstandsoptimierung bei Sattelzügen, durch Rekuperation von Bremsenergie bei Stadtbussen und Verteiler-Lkw, oder auch durch bedarfsgerechte Ansteuerung von Nebenverbrauchern bei Stadt- und Reisebussen. Nähere Betrachtung fanden Maßnahmen zur CO2- Reduktion bei Sattelzügen. So wurde an einem Euro-V-EEV-Sattelzugprototyp in Fahrwiderstandsmessungen die Verbesserung des Luftwiderstands durch aerodynamische Anbauteile für Auflieger quantifiziert. Deren Verbrauchseinsparpotenziale wurden anschließend in validierten Verbrauchssimulationen, welche einen etablierten Verbrauchstest (VerkehrsRundschau-Test) virtuell abbilden, quantifiziert. Ferner zeigte eine Kosten-Nutzen-Rechnung die Effektivität der untersuchten Maßnahmen auf. Der Prototyp wurde anschließend dem realen VerkehrsRundschau-Test einmal in Ausgangskonfiguration und einmal mit einem zuvor bereits im Rahmen der Fahrwiderstandsmessungen untersuchten aerodynamischen Maßnahmenpaket, bestehend aus Seitenverkleidung und Heckeinzugsklappen, unterzogen. Hierbei zeigte sich eine mögliche CO2-Reduktion von 4,8 %. Die gemessene Einsparung lag damit oberhalb der zuvor im Rahmen der Verbrauchssimulation prognostizierten.
Die Aufrechterhaltung von Mobilität sowie der Schutz von Mensch und Natur vor den negativen Einwirkungen von Verkehr erfordern effiziente Lösungen zur Bewältigung des zunehmenden Güterfernverkehrs. Eine Möglichkeit zur Bewältigung des langfristig zunehmenden Straßengüterfernverkehrs wird in der Einführung größerer Transportfahrzeuge bzw. geänderter Fahrzeugkombinationen gesehen. Lang-Lkw weisen aufgrund der größeren maximalen Länge von 25,25 m unter Beibehaltung des bisher gültigen Gesamtgewichtes ein im Vergleich zu konventionellen Lkw vergrößertes Ladevolumen auf. Im Rahmen dieses Forschungsvorhabens wurde untersucht, ob aufgrund des Einsatzes von Lang-Lkw erhöhte Anforderungen an die sicherheits- und brandschutztechnische Ausstattung von Straßentunneln zu stellen sind. Auf Basis von Recherchen zu Ladevolumen und -zusammensetzung wurden Brandleistungen und Rauchfreisetzungsraten von Lang-Lkw ermittelt, mit denen anhand von CFD-Simulationen verschiedener Brandszenarien die Berechnung von Rauch- und Temperatureinwirkung auf die Tunnelnutzer durchgeführt wurde. In einer anschließenden quantitativen Sicherheitsbewertung wurden szenarioabhaengig Schadensausmaße und Eintrittshäufigkeiten der Situation eines nach RABT ausgestatteten Tunnels ohne Lang-Lkw-Verkehr vergleichend gegenübergestellt. Ziel dieses Forschungsvorhabens war es, zu überprüfen, ob die bisher festgelegten Brandlasten für Brände in Straßentunneln auch für Lang-Lkw zutreffen. Zudem waren die aus dem Einsatz von Lang-Lkw auf dem deutschen Straßennetz resultierenden Sicherheitsrisiken für Straßentunnel, insbesondere im Brandfall, zu identifizieren, zu quantifizieren und zu beurteilen. Die Auswirkungen von Fahrzeugbränden mit Lang-Lkw auf die Sicherheit der Tunnelnutzer wurden analysiert, um ggf. erhöhte sicherheitstechnische und brandschutztechnische Anforderungen an Straßentunnel abzuleiten. Die Ergebnisse und ihre Beurteilung wurden abschließend als Empfehlungen an Entscheidungsträger formuliert.
The evaluation of the expected benefit of active safety systems or even ideas of future systems is challenging because this has to be done prospectively. Beside acceptance, the predicted real-world benefit of active safety systems is one of the most important and interesting measures. Therefore, appropriate methods should be used that meet the requirements concerning representativeness, robustness and accuracy. The paper presents the development of a methodology for the assessment of current and future vehicle safety systems. The variety of systems requires several tools and methods and thus, a common tool box was created. This toolbox consists of different levels, regarding different aspects like data sources, scenarios, representativeness, measures like pre-crash-simulations, automated crash computation, single-case-analyses or driving simulator studies. Finally, the benefit of the system(s) is calculated, e.g. by using injury risk functions; giving the number of avoided/mitigated accidents, the reduction of injured or killed persons or the decrease of economic costs.
India is one of the leading countries reporting highest road accidents & related injuries. TMARG (Tata Motors Accident Research Group) has been recording crashes in association with M/s. Lokamanya Medical Foundation since 2011 with M/s, Amandeep Hospitals since Aug 2013. This study has highlighted some accident types not discussed extensively in literature. Trucks to Truck impacts " Cabin interaction with overhanging loadbody structures and Offset underside impacts for passenger vehicles are seen in significant numbers. The paper discusses these in more detail including severity.
Within the COST Action TU1101 the working group WG 1 is dealing with acceptance criteria and problems in helmet use while bicycling concerning conspicuity, thermal stress, ventilation deficits and other potential confounding. To analyze the helmet usage practice of bicyclists in Europe a questionnaire was developed in the scope of working group 1 to collect relevant information by means of a field study. The questionnaire consists of some 66 questions covering the fields of personal data of the cyclist, riding und helmet usage habits, information concerning the helmet model and the sensation of the helmet, as well as information on previous bicycle accidents. A second complementary study is conducted to analyze if the use of a bicycle helmet influences the seating geometry and the posture of cyclists when riding a bicycle and if the if the helmet vertically limits the vision. For this purpose cyclists with and without helmets were photographed in real world situations and relevant geometrical values such as the decline of the torso, the head posture of the upper vertical vision limit due to the helmet were established from the photos. The interim results of the field studies which were conducted in Germany by the Hannover Medical School are presented in this study. Some 227 questionnaires were filled out, of which 67 participants had used a helmet and 42 of the 227 participants have had a bicycle accident before. For the analysis of the riding position and posture of the cyclist over 40 pictures of riders with a helmet and over 240 pictures of riders without a helmet were measured concerning the seating geometry to describe the influence of using a bicycle helmet. Some results in summary: From the riders interviewed with the questionnaire only 11% of the city bike riders and 12% of the mountain bike riders always used the helmet, while 38% of the racing bike riders and 88% of the e-bike-riders always used the helmet. The helmet use seems not to change the sensation of safety of cycling compared to the use of a car. The arguments for not wearing a helmet are mostly stated to be the short distance of a trip, high temperatures or carelessness and waste of time. The reasons for using a helmet are stated to be the feeling of safety and being used to using a helmet. Being a role model for others was also stated to be a reason for helmet use. Concerning the sensation of the helmet 9% of the riders reported problems with the field of vision when using a helmet, 57% saw the problem of sweating too much, and 10% reported headaches or other unpleasant symptoms like pressure on the forehead when using the helmet. The analysis of the seating posture from the pictures taken of cyclists revealed that older cyclists generally have a riding position where the handle bar is higher than the seat (0-° to 10-° incline from seat to handlebar), while younger riders had a higher variance (between -10-° decline and 20-° incline). Further, elderly riders and riders with helmets seem to have a more upright position of the upper body when cycling. The vertical vision limit due to the helmet is determined by the front rim of the helmet (mostly the sun shade). Typical values here range from 0-° (horizontal line from the eye to the sun shade) to 75-° upwards, in which elderly riders tend to have a slightly higher vertical vision limit possibly due to the helmet being worn more towards the face.
The paper gives an overview of the recent (mostly 2012) figures of killed bus/coach occupants (drivers and passengers) in 27 Member States of the European Union as reported by CARE. The Evolution of the figures of bus/coach occupants killed in road accidents urban, rural without motorway and on motorways from 1991 to 2010 in 15 Member States of the EU supplements this information. More detailed are the figures reported for Germany by the Federal Statistics. The paper displays long-term evaluations (1957 to 2012) for killed, seriously and slightly injured occupants in all kinds of buses/coaches. Midterm evaluations (1995 to 2012) of the figures of fatalities and casualties are displayed for different busses according to their identification of road using as coaches, urban buses, school buses, trolley buses and "other buses". To be able to compare the evolutions of the safety of vehicle occupants it is customary to use different risk indicators. Calculations and illustrations for three often used indicators with their development over time are given: fatalities, seriously injured and slightly injured per 100,000 vehicles registered, per 1 billion (109) vehicle-kilometres travelled and per 1 billion (109) person-kilometres. These indicators are shown for occupants of cars, goods vehicles and buses/coaches. For the period from 1957 until 2012 it is obvious, that for all three vehicle categories analysed there was a clear long-term trend towards more occupant safety in terms of casualties per vehicles registered and per vehicle mileage. This was most significant for car occupants but it can be seen for bus/coach occupants and goodsvehicle occupants as well. Figures of killed occupants and of casualties related to person-kilometres are calculated and displayed for the shorter period 1995 to 2012. Here it becomes obvious that the bus/coach is still the safest mode of transport for the occupants of road vehicles. Graphs for the casualty risk indices still show significantly higher risks for car occupants despite the corresponding curve moved sustainable downwards. It is remarkable, that the risks of being killed or injured for the occupants of urban buses is growing whereas the corresponding risk for the occupants of coaches in line traffic tends downwards. The article ends with a short comparison and discussion of the risk indicators which are actually published for the occupants (driver and passengers) of cars and the passengers of buses/coaches, railroads, trams and airplanes. The interpretation of such information depends on the perception and it seems that for a complete view not only one indicator should be used and the evolutions of the indicator values during longer periods (as displayed with examples in the paper) should also be taken into account.