Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (45) (entfernen)
Schlagworte
- Conference (18)
- Konferenz (18)
- Impact test (veh) (16)
- Anfahrversuch (15)
- Test method (15)
- Bewertung (14)
- Evaluation (assessment) (14)
- Prüfverfahren (14)
- Anthropometric dummy (12)
- Dummy (12)
- Fußgänger (11)
- Injury (11)
- Pedestrian (11)
- Verletzung (11)
- Accident (9)
- Simulation (9)
- Unfall (9)
- Analyse (math) (8)
- Analysis (math) (8)
- Collision (8)
- Frontalzusammenstoß (8)
- Head on collision (8)
- Biomechanics (7)
- Biomechanik (7)
- Deutschland (7)
- Germany (7)
- Radfahrer (7)
- Safety (7)
- Sicherheit (7)
- Zusammenstoß (7)
- Child (6)
- Cyclist (6)
- Driver assistance system (6)
- Europa (6)
- Europe (6)
- Fahrerassistenzsystem (6)
- Kind (6)
- Schweregrad (Unfall, Verletzung) (6)
- Severity (accid, injury) (6)
- Car (5)
- Head (5)
- Insasse (5)
- Knee (human) (5)
- Kopf (5)
- Passives Sicherheitssystem (5)
- Schweregrad (Unfall (5)
- Seitlicher Zusammenstoß (5)
- Side impact (5)
- Vehicle occupant (5)
- Verletzung) (5)
- injury) (5)
- Alte Leute (4)
- Brustkorb (4)
- Driver (4)
- Fahrer (4)
- Fahrzeug (4)
- Knie (menschl) (4)
- Leg (human) (4)
- Passive safety system (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Severity (accid (4)
- Thorax (4)
- Accident prevention (3)
- Bein (menschl) (3)
- Bemessung (3)
- Benutzung (3)
- Compatibility (3)
- Database (3)
- Datenbank (3)
- Deformable barrier (impact test) (3)
- Deformierbare Barriere (Anpralltest) (3)
- Design (overall design) (3)
- Fahrzeuginnenraum (3)
- Fahrzeugsitz (3)
- Front (3)
- Improvement (3)
- Interior (veh) (3)
- Kompatibilität (3)
- Modification (3)
- Old people (3)
- Pkw (3)
- Seat (veh) (3)
- Standardisierung (3)
- Standardization (3)
- Statistics (3)
- Statistik (3)
- Unfallverhütung (3)
- Use (3)
- Vehicle (3)
- Verbesserung (3)
- Veränderung (3)
- Abdomen (2)
- Active safety system (2)
- Airbag (2)
- Aktives Sicherheitssystem (2)
- Automatic (2)
- Automatisch (2)
- Autonomes Fahren (2)
- Autonomes Fahrzeug (2)
- Autonomous driving (2)
- Autonomous vehicle (2)
- Belastung (2)
- Braking (2)
- Bremsung (2)
- Classification (2)
- Cost benefit analysis (2)
- Deformation (2)
- Driver information (2)
- Error (2)
- Fahrerinformation (2)
- Fahrstabilität (2)
- Fatality (2)
- Fehler (2)
- Forecast (2)
- Gesetzgebung (2)
- Hospital (2)
- Human body (2)
- Intelligent transport system (2)
- Klassifizierung (2)
- Krankenhaus (2)
- Legislation (2)
- Load (2)
- Menschlicher Körper (2)
- Motorcyclist (2)
- Motorradfahrer (2)
- On the spot accident investigation (2)
- Prognose (2)
- Safety belt (2)
- Sicherheitsgurt (2)
- Technologie (2)
- Technology (2)
- Tödlicher Unfall (2)
- Unfallrekonstruktion (2)
- Unterleib (2)
- Untersuchung am Unfallort (2)
- Vehicle handling (2)
- Vorn (2)
- Wirtschaftlichkeitsrechnung (2)
- (menschl) (1)
- Accident rate (1)
- Accident reconstruction (1)
- Active safety (1)
- Adult (1)
- Aged people (1)
- Air bag (restraint system) (1)
- Aktive Sicherheit (1)
- Angle (1)
- Anti locking device (1)
- Antiblockiereinrichtung (1)
- Antikollisionssystem (1)
- Aufprallschlitten (1)
- Ausrüstung (1)
- Autobahn (1)
- Behaviour (1)
- Bein (1)
- Bicyclist (1)
- Cause (1)
- Cervical vertebrae (1)
- Chassis (1)
- Collision avoidance system (1)
- Communication (1)
- Cooperative intelligent transport system (1)
- Crash Test (1)
- Crashtest (1)
- Damage (1)
- Data acquisition (1)
- Data security (1)
- Datenerfassung (1)
- Datensicherheit (1)
- Dauerhaftigkeit (1)
- Delivery vehicle (1)
- Demografie (1)
- Demography (1)
- Detection (1)
- Detektion (1)
- Development (1)
- Durability (1)
- Efficiency (1)
- Electronic stability program (1)
- Elektronisches Stabilitätsprogramm (1)
- Empfindlichkeit (1)
- Entwicklung (1)
- Equipment (1)
- Erwachsener (1)
- Fahrleistung (1)
- Fahrwerk (1)
- Finite element method (1)
- Foot (not a measure) (1)
- Forschungsarbeit (1)
- Frau (1)
- Fuß (1)
- Gewicht (1)
- Halswirbel (1)
- Head (human) (1)
- Height (1)
- Hinten (1)
- Höhe (1)
- Hüfte (menschl) (1)
- Impact sled (1)
- Impact study (1)
- Impact test (1)
- Intelligentes Transportsystem (1)
- Intelligentes Verkehrssystem (1)
- Interface (1)
- Intersection (1)
- Kleintransporter (1)
- Knie (1)
- Knotenpunkt (1)
- Kommunikation (1)
- Kooperatives System (ITS) (1)
- Kopf (menschl) (1)
- Kraftfahrzeug (1)
- Landstraße (1)
- Leistungsfähigkeit (allg) (1)
- Mathematical model (1)
- Measurement (1)
- Medical examination (1)
- Medizinische Untersuchung (1)
- Messung (1)
- Methode der finiten Elemente (1)
- Motorcycle (1)
- Motorrad (1)
- Motorway (1)
- Norm (tech) (1)
- Overlapping (1)
- Pelvis (1)
- Pfahl (1)
- Pile (1)
- Prototyp (1)
- Prototype (1)
- Prüefverfahren (1)
- Public transport (1)
- Rear (1)
- Rechenmodell (1)
- Reconstruction (accid) (1)
- Research project (1)
- Richtlinien (1)
- Risiko (1)
- Risk (1)
- Robot (1)
- Roboter (1)
- Rural road (1)
- Sachschaden (1)
- Schnittstelle (1)
- Schutz (1)
- Seite (1)
- Sensitivity (1)
- Sensor (1)
- Severity (acid (1)
- Side (1)
- Social factors (1)
- Soziale Faktoren (1)
- Spain (1)
- Spanien (1)
- Specification (standard) (1)
- Specifications (1)
- Spinal column (1)
- Stadt (1)
- Stand der Technik (Bericht) (1)
- State of the art report (1)
- Stress (psychol) (1)
- Technische Vorschriften (Kraftfahrzeug) (1)
- Telecommunication (1)
- Telekommunikation (1)
- Test (1)
- Traffic (1)
- Unfallhäufigkeit (1)
- United kingdom (1)
- Urban area (1)
- Ursache (1)
- Vehicle mile (1)
- Vehicle regulations (1)
- Vereinigtes Königreich (1)
- Verformung (1)
- Verhalten (1)
- Verkehr (1)
- Versuch (1)
- Vorne (1)
- Weight (1)
- Windschutzscheibe (1)
- Windscreen (veh) (1)
- Winkel (1)
- Wirbelsäule (1)
- Wirkungsanalyse (1)
- Woman (1)
- Zusammenstoss (1)
- Öffentlicher Verkehr (1)
- Überdeckung (1)
Institut
- Abteilung Fahrzeugtechnik (45) (entfernen)
The PDB, BASt and Opel conducted two test series to evaluate possible effects on the results obtained using the EEVC WG17 Lower Legform Impactor as a test tool for the assessment of pedestrian safety. The reproducibility and repeatability of the test results were assessed using six legform impactors while keeping the test parameters constant. In the second series one impactor was used and the test parameters were varied to assess the effects on the readings of the legform. The test parameters were velocity, temperature, relative humidity, the point of first contact regarding the deviation in z-direction and the deviations of the pitch, roll and yaw angle. The tests were performed using an inverse setup, i.e. the legform was hit by a guided linear impactor equipped with a honeycomb deformation element. This setup was chosen to be able to vary each single parameter while avoiding variations of the other test parameters at the same time. The test parameters were varied stronger than allowed in regulatory use in order to determine possible dependencies between the parameters and the readings which were acceleration, bending angle and shear displacement.
PROSPECT (Proactive Safety for Pedestrians and Cyclists) is a collaborative research project involving most of the relevant partners from the automotive industry (including important active safety vehicle manufacturers and tier-1 suppliers) as well as academia and independent test labs, funded by the European Commission in the Horizon 2020 research program. PROSPECT's primary goal is the development of novel active safety functions, to be finally demonstrated to the public in three prototype vehicles. A sound benefit assessment of the prototype vehicle's functionality requires a broad testing methodology which goes beyond what has currently been used. Since PROSPECT functions are developed to prevent accidents in intersections, a key aspect of the test methodology is the reproduction of natural driving styles on the test track with driving robots. For this task, data from a real driving study with subjects in a suburb of Munich, Germany was used. Further data from Barcelona will be available soon. The data suggests that intersection crossing can be broken down into five phases, two phases with straight deceleration / acceleration, one phase with constant radius and speed turning, and two phases where the bend is imitated or ended. In these latter phases, drivers mostly combine lateral and longitudinal accelerations and drive what is called a clothoid, a curve with curvature proportional to distance travelled, in order to change lateral acceleration smoothly rather than abrupt. The data suggests that the main parameter of the clothoid, the ratio distance travelled to curvature, is mostly constant during the intersections. This parameter together with decelerations and speeds allows the generation of synthetic robot program files for a reproduction of natural driving styles using robots, allowing a much greater reproducibility than what is possible with human test drivers. First tests show that in principle it is possible to use the driving robots for vehicle control in that manner; a challenge currently is the control performance of the robot system in terms of speed control, but it is anticipated that this problem will be solved soon. Further elements of the PROSPECT test methodology are a standard intersection marking to be implemented on the test track which allows the efficient testing of all PROSPECT test cases, standard mobile and light obstruction elements for quick reproduction of obstructions of view, and a concept for tests in realistic surroundings. First tests using the PROSPECT test methodology will be conducted over the summer 2017, and final tests of the prototype vehicles developed within PROSPECT will be conducted in early 2018
Since its beginning in 1999, the German In-Depth Accident Study (GIDAS) evolved into the presumably leading representative road traffic accident investigation in Europe, based on the work started in Hanover in 1973. The detailed and comprehensive description of traffic accidents forms an essential basis for vehicle safety research. Due to the ongoing extension of demands of researchers, there is a continuous progress in the techniques and systematic of accident investigation within GIDAS. This paper presents some of the most important developments over the last years. Primary vehicle safety systems are expected to have a significant and increasing influence on reducing accidents. GIDAS therefore began to include and collect active safety parameters as new variables from the year 2005 onwards. This will facilitate to assess the impact of present and future active safety measures. A new system to analyse causation factors of traffic accidents, called ACASS, was implemented in GIDAS in the year 2008. The whole process of data handling was optimised. Since 2005 the on-scene data acquisition is completely conducted with mobile tablet PCs. Comprehensive plausibility checks assure a high data quality. Multi-language codebooks are automatically generated from the database structure itself and interfaces ensure the connection to various database management systems. Members of the consortium can download database and codebook, and synchronize half a terabyte of photographic documentation through a secured online access. With the introduction of the AIS 2005 in the year 2006, some medical categorizations have been revised. To ensure the correct assignment of AIS codes to specific injuries an application based on a diagnostic dictionary was developed. Furthermore a coding tool for the AO classification was introduced. All these enhancements enable GIDAS to be up to date for future research questions.
New vehicle types are extensively tested to check almost all factors that influence ride and handling. With reference to the Association of German Car Tuners" (VDAT e.V.) valuations, approximately 10% of all cars in Germany are being modified by their owners. 28 % of those modifications" sales are divergent wheel-tire combinations, 13 % are tuning measures on the chassis suspension or wheel spacers. In almost all cases the singular modifications present a general permission for specific vehicles they have been tested in. Combined tuning measures, however, are often checked by just one inspector, following a procedure of mostly subjective assessment criteria. Today, critical attributes are only being observed, in case a vehicle is involved in an accident and the modifications are identified as crash causal factors or as a cofactor on the development of a crash. For the first time, a field study allows a survey of safety affecting chassis modifications. The test layout has to comply with some basic conditions. Different vehicle concepts with a wide margin of modifications are required to get a high transferability of the results. A total amount of more than 150 tested vehicles serves the same purpose. The tests are limited concerning the installation time of measurement techniques and the requirement that no damage, defilement or immoderate wear of the vehicles are accepted by their owners. Due to such factors as well as the driver Ìs acceptance, the vehicles are controlled by its owners instead of robots or test drivers. For keeping down the driver- influence, the lane has narrow boundaries and the driver has to drive in strictly adherence to the given instructions. After gathering all modifications, as well as static and kinematic parameters like the toe and camber angle, dynamic testing of predominantly lateral dynamics is conducted. Besides standardized tests like the ISO 3888-2 (Obstacle Avoidance) or the ISO 14512 (Braking on Surfaces with Split Coefficient of Friction), to test the influence of modified kingpin offsets caused by wheel spacers, some deviant tests are conducted. Those are required due to the demand of objective test results for road tests with vertical induced stimulation of the chassis suspension. Hence, new tests on corner braking with and without vertical stimulation have been developed. The interpretation of data includes thresholds, e.g. the maximum entrance velocity without hitting cones, on the one hand, and the analysis of characteristics of data concerning time and frequency range, "1-second values" and peak response times on the other hand. Besides the thresholds as indicators for the achievable velocities, which are mainly affected by friction coefficients, the vehicle reaction in the course of time characterizes the vehicle reaction in the threshold range and consequently the operational demands on the driver. The field study has started and promises the first long-range analysis of chassis modifications. The results offer a basis for hypothesis and resultant further test layouts for oncoming studies of the identified critical tuning measures.
When the EEVC proposed the full-scale side impact test procedure, it recommended that consideration should be given to an interior headform test in addition. This was to evaluate areas of contact not assessed by the dummy. EEVC Working Group 13 has been researching the parameters of a possible European headform test procedure in four phases. Earlier stages of the research have been presented at previous ESV conferences. The conclusions from these have suggested that the US free motion headform should be used in any European test procedure and that it should be a free flight test, not guided. This research has now culminated in proposals for a European test procedure. This paper presents the proposed EEVC side impact interior headform test procedure, giving the rationale for the test and the first results from the validation phase of the test protocol.
Proposal for a test procedure of assistance systems regarding preventive pedestrian protection
(2011)
This paper is showing a proposal for a test procedure regarding preventive pedestrian protection based on accident analysis. Over the past years pedestrian protection has become an increasing importance also during the development phase of new vehicles. After a phase of focusing on secondary safety, there are current activities to detect a possible collision by assistance systems. Such systems have the task to inform the driver and/or automatically activate the brakes. How practical is such a system? In which kind of traffic situations will it work? How is it possible to check the effectiveness of such a system? To test the effectiveness, currently there are no generally approved identifiable procedures. It is reasonable that such a test should be based on real accidents. The test procedure should be designed to test all systems, independent of the system- working principle. The vFSS group (advanced Forward-looking Safety Systems) was founded to develop a proposal for a technology independent test procedure, which reflects the real accident situation. This contribution is showing the results of vFSS. The developed test procedure focuses on accidents between passenger cars and pedestrians. The results are based on analysis results of in-depth databases of GIDAS, German insurers and DEKRA and added by analysis of national and international statistics. The in-depth analysis includes many pre-crash situations with several influencing factors. The factors are e. g. speed of the car, speed of the pedestrian, moving direction and a possible obscuration of the pedestrian by an object. The results comprise also the different situations of adults and children. Furthermore, they include details regarding influence of the lighting conditions (daylight or night) especially with respect to the accident consequences. In fact, more accidents happen at daylight, but fatal accidents are more often at night. A clustering of parameter combinations was found which represents typical accident scenarios. There are six typical accident scenarios which were merged in four test scenarios. The test scenarios are varying the starting position of the pedestrian, the pedestrian size (adult or child) and the speed of the pedestrian, whereas the speed of the car will not be varied. To ensure the independency from used sensing technologies it is necessary to use a suitable dummy. For example, if sensors are based on infrared, the dummy should emit the temperature of a human being. The test procedure will identify the collision speed as the key parameter for assessing the effectiveness of the tested system. The collision speed is defined as the reduction between initial test speed of the car and impact speed. The assessment of the speed reduction value regarding the safety benefit, however, will be part of a separate procedure.
In line with the new definition introduced by the European Commission (EC), the number of seriously injured road casualties in Germany for 2014 is assessed in this study. The number of MAIS3+ casualties is estimated by two different methodological approaches. The first approach is based on data from the German Inâ€Depth Accident Study (GIDAS), which is closely related to the German Road Traffic Accident Statistics. The second approach is based on data from the German TraumaRegister DGU-® (TRâ€DGU), which includes many more hospitals but not all MAIS3+ injuries.
Powered Two Wheelers (PTWs) accidents constitute one of the road safety problems in Europe. PTWs fatalities represent 22% at EU level in 2006, having increased during last years, representing an opposite trend compared to other road users" figures. In order to reduce these figures it is necessary to investigate the accident causation mechanisms from different points of view (e.g.: human factor, vehicle characteristics, influence of the environment, type of accident). SAFERIDER project ("Advanced telematics for enhancing the SAFEty and comfort of motorcycle RIDERs", under the European Commission "7th Framework Program") has investigated PTW accident mechanisms through literature review and statistical analyses of National and In-depth accident databases; detecting and describing all the possible PTW's accident configurations where the implementation of ADAS (Advanced Driver Assistance Systems) and IVIS (In-Vehicle Information Systems) could contribute to avoid an accident or mitigate its severity. DIANA, the Spanish in-depth database developed by CIDAUT, has been analyzed for that purpose. DIANA comprises of accident investigation teams, in close cooperation with police forces, medical services, forensic surgeons, garages and scrap yards. An important innovation is the fact that before injured people arrive to hospitals, photographs and explanations about the possible accident injury mechanisms are sent to the respective hospitals (via 3G GPRS technology). By this, additional information to medical staff can be provided in order to predict in advance possible internal injuries and select the best medical treatment. This methodology is presented in this paper. On the other hand, the main results (corresponding to road, rider and PTW characteristics; pre and post-accident manoeuvres; road layout; rider behaviour; impact points; accident causations;...) from the analyses of the PTW accidents used for SAFERIDER are shown. Only accident types relevant to ADAS and IVIS devices have been considered.
A means of assessing the passive safety of automobiles is a desirable instrument for legislative bodies, the automobile industry, and the consumer. As opposed to the dominating motor vehicle assessment criteria, such as engine power, spaciousness, aerodynamics and consumption, there are no clear and generally accepted criteria for assessing the passive safety of cars. The proposed method of assessment combines the results of experimental safety tests, carried out according to existing legally prescribed or currently discussed testing conditions, and a biomechanical validation of the loading values determined in the test. This evaluation is carried out with the aid of risk functions which are specified for individual parts of the body by correlating the results of accident analysis with those obtained by computer simulation. The degree of conformance to the respective protection criterion thus deduced is then weighted with factors which take into account the frequency of occurrence and the severity of the accident on the basis of resulting costs. Each of the test series includes at least two frontal and one lateral crash test against a deformable barrier. The computer-aided analysis and evaluation of the simulation results enables a vehicle-specific overall safety index as well as partial and individual safety values to be determined and plotted graphically. The passive safety provided by the respective vehicle under test can be defined for specific seating positions, special types of accident, or for individual endangered parts of the body.
The main objective of EC CASPER research project is to reduce fatalities and injuries of children travelling in cars. Accidents involving children were investigated, modelling of human being and tools for dummies were advanced, a survey for the diagnosis of child safety was carried out and demands and applications were analysed. From the many research tasks of the CASPER project, the intention of this paper is to address the following: • In-depth investigation of accidents and accident reconstruction. These will provide important points for the injury risk curve, in order to improve it. Different accident investigation teams collected data from real road accidents, involving child car passengers, in five different European countries. Then, a selection of the most appropriate cases for the injury risk curve and the purposes of the project was made for an in-depth analysis. The final stage of this analysis was to conduct an accident reconstruction to validate the results obtained. The in-depth analysis included on-scene accident investigation, creating virtual simulations of the accident/possible reconstruction, and conducting the reconstruction. In the cases of successful reconstructions, new points were introduced to the injury risk curves. Accident reconstructions of selected cases were carried out in test laboratories as the next step following in-depth road accident investigation. These cases were reconstructed using similar child restraint systems (CRS) and the same type make and model as in the real accidents. Reconstructing real cases has several limitations, such as crash angle, cars" approximation paths and crash speed. However, a few changes and applications on the testing conditions were applied to reduce the limitations and improved the representations of the real accidents. After conducting the reconstructions, a comparison between the deformations of the cars on the real accident and the vehicles from the reconstructions was made. Additionally, a correlation between the data captured from the dummies and the injury data from the real accident was sought. This finalises an in-depth analysis of the accident, which will provide new relevant points to the injury risk curve. The CASPER project conducted a large research programme on child safety. On technical points, a promising research area is the developing injury risk curves as a result of in-depth accident investigations and reconstructions. This abstract was written whilst the project was not yet finished and final results are not yet known, but they will be available by the time of the conference. All the works and findings will not necessarily be integrated in the industrial versions of evaluation tools as the CASPER project is a research program.