Abteilung Fahrzeugtechnik
Filtern
Erscheinungsjahr
Dokumenttyp
Sprache
- Englisch (90)
- Deutsch (51)
- Mehrsprachig (1)
Volltext vorhanden
- nein (142) (entfernen)
Schlagworte
- Safety (53)
- Sicherheit (53)
- Anfahrversuch (38)
- Vehicle (37)
- Bewertung (36)
- Evaluation (assessment) (36)
- Fahrzeug (36)
- Impact test (veh) (35)
- Test method (31)
- Prüfverfahren (29)
- Conference (25)
- Konferenz (24)
- Versuch (24)
- Test (23)
- Dummy (22)
- Fußgänger (22)
- Pedestrian (22)
- Accident (20)
- Driver assistance system (20)
- Unfall (20)
- Anthropometric dummy (19)
- Fahrerassistenzsystem (19)
- Injury (19)
- Verletzung (19)
- Simulation (18)
- Collision (17)
- Deutschland (16)
- Germany (16)
- Compatibility (15)
- Kompatibilität (15)
- Zusammenstoß (15)
- Europa (14)
- Europe (14)
- Frontalzusammenstoß (14)
- Head on collision (14)
- Car (13)
- Driver information (13)
- Fahrerinformation (13)
- Head (13)
- Kopf (13)
- Analyse (math) (12)
- Analysis (math) (12)
- Biomechanik (12)
- Driver (12)
- Fahrer (12)
- Fahrzeugführung (12)
- Radfahrer (12)
- Shock (12)
- Biomechanics (11)
- Child (11)
- Gesetzgebung (11)
- Kind (11)
- Legislation (11)
- Method (11)
- Passive safety system (11)
- Passives Sicherheitssystem (11)
- Pkw (11)
- Research project (11)
- Schlag (11)
- Verfahren (11)
- injury) (11)
- Cyclist (10)
- Driving (veh) (10)
- Forschungsarbeit (10)
- Measurement (10)
- Messung (10)
- Schweregrad (Unfall, Verletzung) (10)
- Technische Vorschriften (Kraftfahrzeug) (10)
- Verletzung) (10)
- Automatic (9)
- Automatisch (9)
- Autonomes Fahren (9)
- Autonomous driving (9)
- Behaviour (9)
- EU (9)
- Electronic driving aid (9)
- Elektronische Fahrhilfe (9)
- Schweregrad (Unfall (9)
- Severity (accid, injury) (9)
- Standardisierung (9)
- Technologie (9)
- Technology (9)
- Vehicle regulations (9)
- Verhalten (9)
- Bemessung (8)
- Design (overall design) (8)
- Improvement (8)
- Lkw (8)
- Lorry (8)
- Motorrad (8)
- Seitlicher Zusammenstoß (8)
- Severity (accid (8)
- Side impact (8)
- Verbesserung (8)
- Accident prevention (7)
- Active safety system (7)
- Aktives Sicherheitssystem (7)
- Ausrüstung (7)
- Brustkorb (7)
- Communication (7)
- Development (7)
- Entwicklung (7)
- Equipment (7)
- Insasse (7)
- Kommunikation (7)
- Motorcycle (7)
- Standardization (7)
- Thorax (7)
- Unfallverhütung (7)
- Vehicle occupant (7)
- Wirtschaftlichkeitsrechnung (7)
- Cost benefit analysis (6)
- Fahrstabilität (6)
- Fahrzeuginnenraum (6)
- Impact test (6)
- Interior (veh) (6)
- Knee (human) (6)
- Leistungsfähigkeit (allg) (6)
- Motorcyclist (6)
- Motorradfahrer (6)
- Norm (tech) (6)
- Specification (standard) (6)
- Traffic (6)
- Vehicle handling (6)
- Verkehr (6)
- Alte Leute (5)
- Aufprallschlitten (5)
- Crash helmet (5)
- Deformation (5)
- Deformierbare Barriere (Anpralltest) (5)
- Efficiency (5)
- Ergonomics (5)
- Fatality (5)
- Geschwindigkeit (5)
- Impact sled (5)
- Leg (human) (5)
- Official approval (5)
- Prevention (5)
- Reaction (human) (5)
- Reaktionsverhalten (5)
- Safety belt (5)
- Schutzhelm (5)
- Sicherheitsgurt (5)
- Speed (5)
- Statistics (5)
- Statistik (5)
- Traffic control (5)
- Tödlicher Unfall (5)
- Verkehrssteuerung (5)
- Airbag (4)
- Bein (menschl) (4)
- Belastung (4)
- Braking (4)
- Bremsung (4)
- Collision avoidance system (4)
- Database (4)
- Datenbank (4)
- Decrease (4)
- Ergonomie (4)
- Error (4)
- Fehler (4)
- Gewicht (4)
- Knie (menschl) (4)
- Lenken (Fahrzeug) (4)
- Load (4)
- Modification (4)
- Old people (4)
- Perception (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Richtlinien (4)
- Risiko (4)
- Risk (4)
- Specifications (4)
- Steering (process) (4)
- Verformung (4)
- Verhütung (4)
- Verminderung (4)
- Wahrnehmung (4)
- Weight (4)
- Anthropmetric dummy (3)
- Antikollisionssystem (3)
- Auffahrunfall (3)
- Behinderter (3)
- Benutzung (3)
- Classification (3)
- Deformable barrier (impact test) (3)
- Disabled person (3)
- Driving aptitude (3)
- Emission (3)
- Fahrtauglichkeit (3)
- Fahrzeugsitz (3)
- Human body (3)
- Impact study (3)
- International (3)
- Klassifizierung (3)
- Kraftfahrzeug (3)
- Mathematical model (3)
- Menschlicher Körper (3)
- Messgerät (3)
- Nacht (3)
- Night (3)
- Organisation (3)
- Rear end collision (3)
- Rechenmodell (3)
- Reifen (3)
- Road user (3)
- Seat (veh) (3)
- Severity (acid (3)
- Telecommunication (3)
- Telekommunikation (3)
- Telematics (3)
- Telematik (3)
- Tyre (3)
- Unterfahrschutz (3)
- Use (3)
- Verkehrsteilnehmer (3)
- Veränderung (3)
- Warning (3)
- Abdomen (2)
- Accident rate (2)
- Active safety (2)
- Adolescent (2)
- Air bag (restraint system) (2)
- Aktive Sicherheit (2)
- Ankündigung (2)
- Anti locking device (2)
- Apparatus (measuring) (2)
- Attitude (psychol) (2)
- Autonomes Fahrzeug (2)
- Autonomous vehicle (2)
- Baumusterzulassung (2)
- Bicycle (2)
- Bicyclist (2)
- Body (car) (2)
- Buch (2)
- Cause (2)
- Cervical vertebrae (2)
- Crash Test (2)
- Deceleration (2)
- Delivery vehicle (2)
- Detection (2)
- Detektion (2)
- Digital model (2)
- Einstellung (psychol) (2)
- Empfindlichkeit (2)
- Eye movement (2)
- Fahrrad (2)
- Force (2)
- Forschungsbericht (2)
- Front (2)
- Fuel consumption (2)
- Gestaltung (2)
- Halswirbel (2)
- Headlamp (2)
- Hospital (2)
- Hüfte (menschl) (2)
- Individueller Verkehr (2)
- Industrie (2)
- Industry (2)
- Intelligent transport system (2)
- Interface (2)
- Interview (2)
- Jugendlicher (2)
- Karosserie (2)
- Knie (2)
- Kraft (2)
- Kraftstoffverbrauch (2)
- Krankenhaus (2)
- Layout (2)
- Lärm (2)
- Mobility (2)
- Mobilität (2)
- Noise (2)
- Numerisches Modell (2)
- On the spot accident investigation (2)
- Organization (association) (2)
- Private transport (2)
- Prototyp (2)
- Prototype (2)
- Prüfstand (2)
- Reconstruction (accid) (2)
- Scheinwerfer (2)
- Schutz (2)
- Sensitivity (2)
- Sensor (2)
- Sichtbarkeit (2)
- Spinal column (2)
- State of the art report (2)
- Straßenverkehrsrecht (2)
- Stress (psychol) (2)
- Test rig (2)
- Textbook (2)
- Underride protection (2)
- Unfallhäufigkeit (2)
- Unfallrekonstruktion (2)
- Unterleib (2)
- Untersuchung am Unfallort (2)
- Ursache (2)
- Vehicle inspection (2)
- Verzögerung (2)
- Sichtbarkeit (2)
- Visual display (2)
- Wirbelsäule (2)
- Wirksamkeitsuntersuchung (2)
- Zulassung (tech) (2)
- Zusammenstoss (2)
- (menschl) (1)
- Ablenkung (1)
- Ablenkung (psychol) (1)
- Abnutzung (1)
- Absorption (1)
- Abstandsregeltempomat (1)
- Acceleration (1)
- Accident data (1)
- Accident proneness (1)
- Adaptive cruise control (1)
- Adult (1)
- Aged people (1)
- Angle (1)
- Anhänger (1)
- Antiblockiereinrichtung (1)
- Antiblockiersystem (1)
- Antikollisisonssystem (1)
- Apparatus (measurement) (1)
- Area traffic control (1)
- Arzneimittel (1)
- Asphaltstraße (Oberbau) (1)
- Attention (1)
- Aufmerksamkeit (1)
- Aufprall (1)
- Augenbewegungen (1)
- Autobahn (1)
- Battery (1)
- Baustelle (1)
- Bein (1)
- Benchmark (1)
- Benefit cost analysis (1)
- Beschleunigung (1)
- Bestrafung (1)
- Betriebsverhalten (1)
- Bildschirm (1)
- Biophysic (1)
- Blendung (1)
- Blind spot (veh) (1)
- Bonnet (car) (1)
- Brake (1)
- Brake light (1)
- Bremse (1)
- Bremslicht (1)
- Bridge (1)
- Bruch (mech) (1)
- Brücke (1)
- Bumper (1)
- Bus (1)
- Cadaver (1)
- Calibration (1)
- Carbon dioxide (1)
- Chassis (1)
- Cinematography (1)
- Compatiblity (1)
- Components of the car (1)
- Compression (1)
- Construction site (1)
- Contact (tyre road) (1)
- Control (1)
- Cooperative intelligent transport system (1)
- Correlation (math, stat) (1)
- Crashtest (1)
- Crossing the road (pedestrian) (1)
- Damage (1)
- Data acquisition (1)
- Data exchange (1)
- Data processing (1)
- Data security (1)
- Data transmission (telecom) (1)
- Datenaustausch (1)
- Datenerfassung (1)
- Datensicherheit (1)
- Datenverarbeitung (1)
- Datenübertragung (telekom) (1)
- Dauerhaftigkeit (1)
- Daylight (1)
- Deformable barrier (Impact test) (1)
- Deformable barrier system (impact test) (1)
- Dehnungsmessstreifen (1)
- Demografie (1)
- Demographie (1)
- Demography (1)
- Diesel engine (1)
- Dieselmotor (1)
- Dimension (1)
- Disstraction (1)
- Distraction (1)
- Driver (veh) (1)
- Driver training (1)
- Drunkenness (1)
- Durability (1)
- Dynamo (1)
- Echtzeit (1)
- Economic efficiency (1)
- Economics of transport (1)
- Eichung (1)
- Electric vehicle (1)
- Electroencephalography (1)
- Electronic stability program (1)
- Elektroencephalographie (1)
- Elektrofahrzeug (1)
- Elektronisches Stabilitätsprogramm (1)
- Emission control (1)
- Emissionskontrolle (1)
- Engine capacity (1)
- Environment (1)
- Erwachsener (1)
- European New Car Assessment Programme (1)
- Expert system (1)
- Expertensystem (1)
- Fahrassistenzsystem (1)
- Fahrausbildung (1)
- Fahrbahnmarkierung (1)
- Fahrbahnüberquerung (1)
- Fahrgeschicklichkeit (1)
- Fahrleistung (1)
- Fahrsimulator (1)
- Fahrstreifen (1)
- Fahrstreifenwechsel (1)
- Fahrwerk (1)
- Fahrzeugabstand (1)
- Fahrzeugbeleuchtung (1)
- Fahrzeugteile (1)
- Failure (1)
- Fatigue (human) (1)
- Federung (1)
- Feuer (1)
- Film (Filmtechnik) (1)
- Finite element method (1)
- Fire (1)
- Flexible pavement (1)
- Foot (not a measure) (1)
- Form (1)
- France (1)
- Frankreich (1)
- Frau (1)
- Freight transport (1)
- Freizeit (1)
- Frequency (1)
- Frequenz (1)
- Future transport mode (1)
- Fuß (1)
- Fußgängerbereich (1)
- Geländefahrzeug (1)
- Glare (1)
- Grenzfläche (1)
- Grenzwert (1)
- Güterverkehr (1)
- Haftung (jur) (1)
- Harmonization (1)
- Head (human) (1)
- Height (1)
- Herstellung (1)
- Highway (1)
- Highway design (1)
- Hinten (1)
- Hip (human) (1)
- Hubraum (1)
- Höhe (1)
- In Bewegung (1)
- In service behaviour (1)
- In situ (1)
- Incident detection (1)
- Information (1)
- Information documentation (1)
- Innenstadt (1)
- Intelligentes Transportsystem (1)
- Intelligentes Verkehrssystem (1)
- Interactive model (1)
- Interaktives Modell (1)
- Intersection (1)
- Kamera (1)
- Kleintransporter (1)
- Knotenpunkt (1)
- Kohlendioxid (1)
- Kompatiblität (1)
- Kontakt Reifen Straße (1)
- Kooperatives System (ITS) (1)
- Kopf (menschl) (1)
- Korrelation (math, stat) (1)
- Kunststoff (1)
- Landstraße (1)
- Lane changing (1)
- Leichnam (1)
- Leuchtdichte (1)
- Liability (1)
- Lichtsignal (1)
- Lidschlag (1)
- Lieferfahrzeug (1)
- Limit (1)
- Luminance (1)
- Manufacture (1)
- Market (1)
- Markt (1)
- Medical aspects (1)
- Medical examination (1)
- Medication (1)
- Medizinische Gesichtspunkte (1)
- Medizinische Untersuchung (1)
- Mensch Maschine Verhältnis (1)
- Text (1)
- Methode der finiten Elemente (1)
- Motor cycle (1)
- Motorhaube (1)
- Motorway (1)
- Moving (1)
- Müdigkeit (1)
- Nachricht (1)
- Nasse Straße (1)
- Naturalistic Driving (1)
- Naturalistic driving (1)
- Oberfläche (1)
- Oberflächentextur (1)
- Optimum (1)
- Optische Anzeige (1)
- Organization (1)
- Overlapping (1)
- Pavement Management System (1)
- Pavement management system (1)
- Pedestrian precinct (1)
- Pelvis (1)
- Penalty (1)
- Pfahl (1)
- Pile (1)
- Planning (1)
- Planung (1)
- Plastic material (1)
- Population (1)
- Productivity (1)
- Program (computer) (1)
- Prüefverfahren (1)
- Psychologie (1)
- Psychology (1)
- Public transport (1)
- Publicity (1)
- Quality (1)
- Qualität (1)
- Real time (1)
- Rear (1)
- Rear view mirror (1)
- Rechenprogramm (1)
- Recreation (1)
- Reflectorized material (1)
- Reflexstoffe (1)
- Research report (1)
- Retread tyre (1)
- Rippe (menschl) (1)
- Road marking (1)
- Road traffic (1)
- Robot (1)
- Roboter (1)
- Rotation (1)
- Runderneuerter Reifen (1)
- Rural road (1)
- Rutting (wheel) (1)
- Rückspiegel (1)
- Sachschaden (1)
- Safety fence (1)
- Schall (1)
- Schallpegel (1)
- Schnittstelle (1)
- Schulter (1)
- Schutzeinrichtung (1)
- Schweregrad /Unfall (1)
- Schwingung (1)
- Schädel (1)
- Sehvermögen (1)
- Seite (1)
- Shape (1)
- Shoulder (human) (1)
- Side (1)
- Simulator (driving) (1)
- Size and weight regulations (1)
- Skill (road user) (1)
- Skull (1)
- Social factors (1)
- Sociology (1)
- Sound (1)
- Sound level (1)
- Soziale Faktoren (1)
- Soziologie (1)
- Spain (1)
- Spanien (1)
- Spectrum (1)
- Spektrum (1)
- Sport utility vehicle (1)
- Spurrinne (1)
- Stadardization (1)
- Stand der Technik (Bericht) (1)
- Steuerung (1)
- Stoßstange (1)
- Strain gauge (1)
- Straße (1)
- Straßenentwurf (1)
- Straßenverkehr (1)
- Stress (1)
- Störfallentdeckung (1)
- Surface (1)
- Surface texture (1)
- Suspension (veh) (1)
- Tageslicht (1)
- Tangential (1)
- Technische Vorschriften (1)
- Technische Überwachung (1)
- Technische Überwachung (Fahrzeug) (1)
- Tests (1)
- Toter Winkel (1)
- Town centre (1)
- Toxicity (1)
- Toxizität (1)
- Traffic lanes (1)
- Traffic regulation (1)
- Traffic regulations (1)
- Traffic sign (1)
- Traffic signal (1)
- Trailer (1)
- Train (1)
- Transport (1)
- Transport infrastructure (1)
- Trunkenheit (1)
- Typenzulassung (1)
- Tätigkeitsbericht (1)
- USA (1)
- Umwelt (1)
- Underride prevention (1)
- Unfalldaten (1)
- Unfallneigung (1)
- United Kingdom (1)
- Vehicle Regulations (1)
- Vehicle lighting (1)
- Vehicle mile (1)
- Vehicle regulation (1)
- Vehicle spacing (1)
- Veraenderung (1)
- Vereinigtes Königreich (1)
- Verkehrsinfrastruktur (1)
- Verkehrswirtschaft (1)
- Verkehrszeichen (1)
- Vibration (1)
- Video camera (1)
- Vision (1)
- Vorn (1)
- Vorne (1)
- Warnung (1)
- Wear (1)
- Weather (1)
- Werbung (1)
- Wet road (1)
- Windschutzscheibe (1)
- Windscreen (veh) (1)
- Winkel (1)
- Wirkungsanalyse (1)
- Wirtschaftlichkeit (1)
- Witterung (1)
- Woman (1)
- Zentrale Verkehrssteuerung (1)
- Zug (Eisenbahn) (1)
- Zukünftiges Verkehrsmittel (1)
- Zusammendrückung (1)
- Öffentlicher Verkehr (1)
- Überdeckung (1)
Institut
EEVC Working Group 15 (Compatibility Between Passenger Cars) has carried out research for several years thanks to collaborative project funded by the E.C. and also by exchanging results of projects funded by national programmes. The main collaborative activity of the EEVC WG15 for the last four years was a research project partly funded by the European Commission, where the group made the first attempt to investigate compatibility between passenger cars in a comprehensive research program. Accident, crash test, and mathematical modelling data were analysed. The main result was that structural incompatibilities were frequently found and identified as the main source of incompatibility problems but were not easy to quantify. Unfortunately as little vehicle information other than mass is recorded in most accident databases, most analyses have only been able to show the effect of mass or mass ratio. Common ideas to improve compatibility have been reached by this group and from discussion with other research groups. They will be investigated in the next phase, where research work will concentrate on the development of methods to assess compatibility of passenger cars. The main idea is that the prerequisite to improve crash compatibility between cars is to improve structural interaction. The most important issue is that improved compatibility must not compromise a vehicle- self protection. Test methods should lead to vehicles which show good structural interaction in car to car accidents. Test methods to prove good compatibility may be an adaptation of existing regulatory test procedures (offset deformable barrier test or full width test like in the USA) for frontal impact or may be new compatibility tests. Additional criteria, e.g. impact force distribution, and maximum vehicle deceleration or maximum vehicle impact force should result in compatible cars. Attempts will be made to estimate the benefit of a more compatible car fleet for the European Community.
The purpose of this paper is to review injuries found in real world lateral collisions and determine the mechanisms responsible for certain kinds of biomechanical failure. During the last years the distribution of deaths among the different types of accidents has changed. Lateral collisions now are the most frequent cause of fatal and other serious injuries. Every third accident is an impact from the side, while every second fatality is the result of a lateral accident. Just a few years ago this value was no higher than 30%. This is probably the result of increasing safety standards for frontal collisions (airbags, seatbelt usage, structural improvements of cars, etc.). Although the number of registered vehicles increased, the total amount of fatalities decreased during the same period. Thus it is now necessary to pay greater attention to the lateral accident situation in order to improve road safety and decrease the number of traffic injuries. Several European organisations had decided to launch the project SID2000, which was funded by the European Commission, with the intention of gathering more knowledge on injuries occurring in lateral accidents and the mechanisms that lead to such injuries. This should enable the group to define the requirements for a new side impact dummy (SID) to be designed. Within the same project the existing TNO-EUROSID 1 was enhanced by another group and the experience gained has now enabled allowed to design a better measuring device for side impacts. The data used for this contribution came from sources from all over Europe and had to be gathered in such a manner that as many accident parameters as possible were taken into account.
Despite the steadily declining number of pedestrian fatalities and injuries in most European countries during recent decades, pedestrian protection is still of great importance in the European Union as well as in Germany. This is because they still constitute a large proportion of road user casualties and are more likely to suffer serious and fatal injuries than most other road users. In 1999 only car occupants suffered more fatal injuries than pedestrians in Germany. In December 1998, EEVC WG 17 completed their review and updating of the EEVC WG 10 pedestrian test procedure that made it possible to evaluate the protection afforded to pedestrians by the front of passenger cars in an accident. Within the scope of this procedure, four different impactors are used representing those parts of the body which are injured very often and/or very seriously in vehicle-pedestrian-collisions. In a project executed by IKA and BASt, a small family car was tested according to the EEVC WG 17 test procedure. Afterwards modifications to the car were carried out in order to improve the pedestrian protection provided by the vehicle design. There were certain restrictions placed on the level of modifications undertaken, e.g. only minor modifications to vehicle styling and to the vehicle structures, which provide passenger protection. The redesigned vehicle was tested again using the WG 17 test procedure. The test results of the modified vehicle were compared with those of the standard vehicle and evaluated. The results show that considered measures for pedestrian protection in many areas of the vehicle front structure and the use of innovative techniques can lead to a significant reduction of the loads of pedestrians at an acceptable expense.
EEVC Status report
(2001)
Erfahrungen in Deutschland mit der Anwendung der EU-Empfehlung "Europäischer Grundsatzkatalog zur Fahrer-Fahrzeug-Schnittstelle für Informations- und Kommunikationssysteme" werden beschrieben und daraus Konsequenzen abgeleitet. Insgesamt ist die ergonomische Bewertung der Mensch-Maschine-Schnittstelle von Fahrerinformations- und -Kommunikationssystemen nicht als einmaliges Ereignis, sondern als immer wieder zu durchlaufender Vorgang anzusehen, da neben neuen wissenschaftlichen Erkenntnissen jeweils neu entwickelte Geräte und Systeme zu berücksichtigen sind, was eine Anpassung der Grundsätze beziehungsweise eine Öffnung der Grundsätze für technische Neuerungen mit hohem Sicherheitsstandard erfordern könnte. Demonstrationen neuartiger Bedienkonzepte, Systementwicklungen und Arbeitstechniken sowie die hierzu durchgeführten Nutzertests verdeutlichen, dass ergonomisch sehr vielversprechende Lösungen (wie zum Beispiel Schnittstellen, die Eingaben mittels Gestik gestatten) existieren, beziehungsweise sich in der Entwicklung befinden. Diese Lösungen zeigen, dass die Empfehlung in weiten Bereichen technologieabhängig, das heißt, mit Blick auf Neuentwicklungen, nicht erschöpfend ist. Die Weiterentwicklung der Grundsätze sowie die Bewertung der sicheren Gestaltung der Mensch-Maschine-Schnittstelle bedarf nicht nur einer europaweit, sondern weltweit abgestimmten Vorgehensweise.
In den vergangenen 20 Jahren hat der Verkehrslärm an Autobahnen um durchschnittlich 2,5 dB(A), an Bundesstraßen um 1,5 dB(A) zugenommen. Die Absenkung der Geräuschgrenzwerte durch technische Maßnahmen an den Fahrzeugantrieben brachte nicht den gewünschten Erfolg, da außerorts das Reifen-Fahrbahn-Geräusch überwiegt und die Verkehrsmenge generell stark gewachsen ist. Eine Stagnation des Verkehrsaufkommens ist nicht erkennbar, sodass auch in Zukunft neue Straßen in der dicht besiedelten Bundesrepublik nur noch zusammen mit sehr kostenintensiven Lärmschutzmaßnahmen geplant und gebaut werden können. Mit dieser Ausgangslage wurde, als Teil des Forschungsnetzwerkes "Leiser Verkehr", das Verbundprojekt "Reduzierte Reifen-Fahrbahn-Geräusche" konzipiert. In dem Projekt arbeiten 16 Partner aus Verwaltung, Industrie und Forschung zusammen, um zum einen die theoretischen Grundlagen bei der Entstehung und Messung von Reifen-Fahrbahn-Geräuschen zu erarbeiten, zum anderen die Komponenten des Systems "Reifen-Fahrbahn" zu optimieren. Dieses System setzt sich aus den Teilen Reifen, Fahrzeug, Straße (Asphalt-, Betonbauweise) und den Fahrbahnübergängen der Brücken zusammen. Im Rahmen der Projektlaufzeit sollen 1 bis 3 dB(A) leisere Komponenten des geräuscherzeugenden Gesamtsystems entwickelt, erprobt und gebaut werden. Mittelfristig soll durch die Entwicklung von Reifen-Fahrbahn-Geräusch-Modellen ein mindestens 5 dB(A) leiseres Gesamtsystern konzipiert werden. Nach Beginn im Sommer 2001 befindet sich das Projekt momentan in der Arbeitsphase und mit ersten Ergebnissen ist Ende des laufenden Jahres zu rechnen.
Es wird über das Ende 2002 abgeschlossene EU-Projekt ADVISORS berichtet. Ziel dieses Projektes, an dem sich 16 Organisationen aus 10 europäischen Ländern beteiligten, war es, die Entwicklung, Testung und Implementierung von Fahrerassistenzsystemen (FAS) zu unterstützen. Es wurde eine umfassende Methodik zur Bewertung von FAS entwickelt und auf dieser Basis wurden eine Reihe von Evaluationsstudien zu ausgewählten FAS durchgeführt. Des Weiteren wurden Implementierungsstrategien für bestimmte FAS entwickelt und mit Experten verschiedener Länder diskutiert.
The Swedish National Road Administration (SNRA), the Japanese Automobile Research Institute (JARI) and the Federal Highway Research Institute (BASt) are co-operating in the International Harmonized Research Activities on Intelligent Transportation Systems (IHRA-ITS). Under this umbrella a joint study was conducted. The overall objective of this study was to contribute to the definition and validation of a "battery of tools" which enables a prediction and an assessment of changes in driver workload due to the use of in-vehicle information systems (IVIS) while driving. In this sense \"validation\" means to produce empirical evidence from which it can be concluded that these methods reliably discriminate between IVIS which differ in terms of relevant features of the HMI-design. Additionally these methods should also be sensitive to the task demands imposed on the driver by the traffic situation and their interactions with HMI-design. To achieve these goals experimental validation studies (on-road and in the simulator) were performed in Sweden, Germany and Japan. As a common element these studies focused on the secondary task methodology as an approach to the study of driver workload. In a joint German-Swedish on-road study the Peripheral Detection Task (PDT) was assessed with respect to its sensitivity to the complexity of traffic situations and effects of different types of navigation systems. Results show that the PDT performance of both the German and the Swedish subjects reflects the task demands of the traffic situations better than those of the IVIS. However, alternative explanations are possible which will be examined by further analyses. Results of this study are supplemented by the Japanese study where informational demands induced by various traffic situations were analysed by using a simple arithmetic task as a secondary task. Results of this study show that relatively large task demands can be expected even from simple traffic situations.
The development of tyre- and truck-manufacturers leads to the direction to introduce wide base single tyres (size 495/45R22,5) instead of twin tyres on the driving axle of trucks, tractors and busses. To study the driving behaviour and safety of various trucks and units with different tyre combinations and loading conditions was the aim of the study. A computer-aided simulation was used for this investigation. Drive tests with a 40 t unit with prototype single tyres on the drive axle were carried out to verify the simulation. Alterations in driving behaviour and driving safety are mainly dependent on the tyre cornering stiffness. The prototype wide single tyres had a higher lateral stiffness which leads to a higher degree of under-steering (safer driving behaviour). The altered spring base on the drive axle had no influence on the side- tilt stability of vehicle combinations but the solo truck profited from the higher rear axle roll stiffness (less danger for roll-over accidents). As far as the driving safety is concerned nothing speaks against wide base tyres on the drive axle. The simulation of a tyre defect in a bend (assuming 40% of the max. transferable side force for the flat tyre) showed no increased danger using wide single tyres. Later driving tests showed however the need of tyre run flat possibilities to avoid jack-knifing of road trains. Also tyre pressure monitoring systems and electronic stability programs for the trucks are advised.
The frontal crash is still an important contributor to deaths and serious injured resulting from road accidents in Europe. As the Hybrid-III dummy used in crash tests is over two decades old, the European Enhanced Vehicle-safety Committee is studying the potential for a new test device. Key is the availability of a well-defined set of requirements that identifies the minimum level of biofidelity required for an advanced frontal dummy. In this paper, a complete set of frontal impact biofidelity requirements, consisting of references , description of test conditions and corridors, is presented.
At the 2001 ESV-Conference the EEVC working group on compatibility (WG 15) reported the first phase of the research work to investigate the major factors influencing compatibility between passenger cars. Following this, WG15 performed an interim study, which was partly subventioned by the European Commission, the results of which are reported in this paper. In the next phase of work, it is intended to complete the development of a suite of test procedures and associated performance criteria to assess the compatibility of passenger cars in frontal impacts The main areas of work for the interim study were: - in depth accident data analysis - the development of methods to assess the potential benefit of improved compatibility - crash testing. The accident analysis identified the major compatibility problems to be poor structural interaction, stiffness mismatching and compartment strength. Different methods to assess the potential benefit of improved compatibility were applied to in depth accident data. Full scale crash testing including a car to car test was performed to help develop the following candidate compatibility test procedures: - a full width wall test with a deformable aluminium honeycomb face and a high resolution load cell wall - an offset barrier test with the EEVC barrier face and a high resolution load cell wall - an offset barrier test with the progressively deformable barrier (PDB) face. The results of the interim study will be presented in detail and the proposed methodology of the next phase to complete the development of a suite of test procedures for the assessment of car to car compatibility in frontal impacts will be outlined
When the EEVC proposed the full-scale side impact test procedure, it recommended that consideration should be given to an interior headform test in addition. This was to evaluate areas of contact not assessed by the dummy. EEVC Working Group 13 has been researching the parameters of a possible European headform test procedure in four phases. Earlier stages of the research have been presented at previous ESV conferences. The conclusions from these have suggested that the US free motion headform should be used in any European test procedure and that it should be a free flight test, not guided. This research has now culminated in proposals for a European test procedure. This paper presents the proposed EEVC side impact interior headform test procedure, giving the rationale for the test and the first results from the validation phase of the test protocol.
Sowohl mit dem 3. Road Safety Action Programme der Europäischen Kommission als auch mit dem deutschen Verkehrssicherheitsprogramm werden die verkehrspolitischen Zielsetzungen zur Erhöhung der Verkehrssicherheit in Europa und Deutschland festgelegt. Hierbei muss die passive Fahrzeugsicherheit auch weiterhin eine bedeutende Rolle übernehmen. Es ist jedoch auch festzustellen, dass durch den zunehmenden Einsatz von Elektronik im Fahrzeug die klassischen Bereiche der aktiven und passiven Fahrzeugsicherheit mehr und mehr ineinander greifen. Der Fortschritt in der Elektronik ermöglicht eine Integration der Systeme der aktiven und passiven Sicherheit. Dadurch lässt sich die Fahrzeugsicherheit weiter steigern. Durch die Vernetzung der Systeme lassen sich sogar Kosten einsparen. Der europäische Regierungsausschuss EEVC (European Enhanced Vehicle-safety Committee), die Verbraucherschutzorganisation Euro NCAP (European New Car Assessment Programme) und die Europäische Kommission mit der eSafety Initiative haben diesen Trend erkannt und entsprechende Aktivitäten eingeleitet.
Der Autor berichtet über das neu eingerichtete Expertennetzwerk HUMANIST, das sich mit Fragen der nutzerorientierten und sicherheitsgerechten Gestaltung von Fahrerassistenz- und Informationssystemen befasst. Ziel sind die Zusammenführung und Integration entsprechender Forschungsaktivitäten auf europäischer Ebene.
Abschluss des deutsch-französischen Verbundprojekts "Inter-Vehicle Hazard Warning" (DEUFRAKO-IVWH)
(2004)
Im Rahmen der Deutsch-Französischen Kooperation im Verbundprojekt "Inter-Vehicle Hazard Warning" (DEUFRAKO-IVWH) wurde ein auf Fahrzeug-Fahrzeug-Kommunikation basierendes Warnsystem konzipiert und bewertet. Die im Rahmen des Projekts durchgeführten Arbeiten haben gezeigt, dass ein auf Fahrzeug-Fahrzeug-Kommunikation basierendes Warnsystem prinzipiell geeignet ist, einen Beitrag zur Erhöhung der Verkehrssicherheit zu leisten. Das Ausmaß der zu erwartenden positiven Effekte ist allerdings ganz wesentlich abhängig vom Ausstattungsgrad der Fahrzeugflotte mit einem solchen System.
Die Gestaltung der Interaktion zwischen den elektronischen "Infotainment"-Systemen im Auto und dem Fahrer gewinnt zunehmend an Bedeutung für die Verkehrssicherheit. Dem positiven Nutzen, den die Systeme hinsichtlich Fahrerunterstützung und Fahrkomfort aufweisen, stehen möglicherweise negative Auswirkungen auf die Fahrsicherheit gegenüber, wenn Ablenkung und Überlastung des Fahrers auftreten. Diesem Problemfeld widmete sich das EU-Projekt "Communication Multimedia Unit Inside Car" (COMMUNICAR), das im Juni 2003 abgeschlossen wurde. Hauptziel des Projekts waren die Entwicklung und Evaluierung eines Systems, das den Fahrer bei der Bewältigung der eingehenden Informationen unterstützt und eine zentrale Bedienmöglichkeit aufweist. Das COMMUNICAR-System enthält folgende wesentliche Elemente: Verschiedene Funktionen zu Telematikdiensten, Unterhaltung und zur digitalen Darstellung der traditionellen Informationen; eine als Informationsmanager (IM) bezeichnete regelbasierte Filterlogik sowie eine multimediale integrierte Mensch-Maschine-Schnittstelle (MMS) zur zentralen Bedienung und Informationsausgabe. In der ersten Phase der Entwicklung wurden die Nutzeranforderungen analysiert, die Funktionen definiert und die Ein-/Ausgabemodalitäten festgelegt. In der zweiten Phase wurden virtuelle Prototypen zur Gestaltung der MMS erarbeitet und diese in den anschließenden Nutzertest im Labor bewertet und ausgewählt. Die dritte Phase diente der Systementwicklung, bei der es vor allem um die Filterlogik des IM ging. Das System wurde zunächst im Fahrsimulator, anschließend unter Feldbedingungen getestet. Die Ergebnisse, die in den wesentlichen Einzelheiten berichtet werden, zeigten insgesamt ein positives Bild sowohl hinsichtlich der subjektiven Akzeptanzbewertung als auch hinsichtlich des Fahrverhaltens.
Die amtliche Straßenverkehrsunfallstatistik kann nur in begrenztem Umfang Informationen zu Unfallentstehung, Unfallablauf sowie zu den zugrunde liegenden Verletzungsmechanismen bereitstellen. Verbleibende Informationslücken lassen sich durch spezielle Erhebungsteams schließen, die Verkehrsunfälle nach wissenschaftlichen Aspekten dokumentieren. Hierzu unterhalten das Bundesministerium für Verkehr, Bau- und Wohnungswesen und die Bundesanstalt für Straßenwesen seit 30 Jahren ein Forschungsprojekt zur Unfalldatenerhebung an der Medizinischen Hochschule Hannover. Seit 1999 erfolgt eine Kooperation mit der Forschungsvereinigung Automobiltechnik (FAT), die ein weiteres Erhebungsteam an der Technischen Universität Dresden unterhält. Die Unfalldaten gehen in die gemeinsame GIDAS-Datenbank ein, aus der sich umfassende Informationen zu den breit gefächerten Forschungsfeldern "Passive und aktive Fahrzeugsicherheit", "Verkehrs- und Rettungsmedizin" und "Straßenbezogene Sicherheitsfragen" gewinnen lassen. In der Zukunft werden Unfallvermeidungsstrategien und Unfallursachenprophylaxe im Vordergrund einer prospektiven Unfallforschung stehen. Die Daten werden auch in Zukunft für die weitere Verbesserung der Verkehrssicherheit einen bedeutenden Beitrag leisten.
The European Enhanced Vehicle-safety Committee (EEVC) Working Group 13 for Side Impact Protection has been developing an Interior Headform Test Procedure to complement the full-scale Side Impact Test Procedure for Europe and for the proposed IHRA test procedures. In real world accidents interior head contacts with severe head injuries still occur, which are not always observed in standard side impact tests with dummies. Thus a means is needed to encourage further progress in head protection. At the 2003 ESV-Conference EEVC Working Group 13 reported the results on Interior Headform Testing. Further research has been performed since and the test procedure has been improved. This paper gives an overview of its latest status. The paper presents new aspects which are included in the latest test procedure and the research work leading to these enhancements. One topic of improvement is the definition of the Free Motion Headform (FMH) impactor alignment procedure to provide guidelines to minimize excessive headform chin contact and to minimize potential variability. Research activities have also been carried out on the definition of reasonable approach head angles to avoid unrealistic test conditions. Further considerations have been given to the evaluation of head airbags, their potential benefits and a means of ensuring protection for occupants regardless of seating position and sitting height. The paper presents the research activities that have been made since the last ESV Conference in 2003 and the final proposal of the EEVC Headform Test Procedure.