91 Fahrzeugkonstruktion
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (164)
- Buch (Monographie) (111)
- Wissenschaftlicher Artikel (18)
- Arbeitspapier (13)
- Teil eines Buches (Kapitel) (8)
- Bericht (5)
Schlagworte
- Deutschland (138)
- Germany (138)
- Safety (124)
- Sicherheit (123)
- Conference (101)
- Konferenz (98)
- Fahrzeug (89)
- Vehicle (88)
- Research report (77)
- Forschungsbericht (75)
Run-Flat-Reifen (Reifen mit Notlaufeigenschaften) stellen eine sicherheitsrelevante Komponente am Fahrzeug dar. Im Gegensatz zu Standardreifen bieten sie die Eigenschaft, auch im drucklosen Zustand noch eine gewisse Wegstrecke mit dem Fahrzeug zurücklegen zu können. In der vorliegenden Untersuchung wurden verschiedene Run-Flat-Reifen auf ihre Leistungsfähigkeit hin untersucht. Zum einen wurde die Dauerhaltbarkeit der Reifen getestet. Die zugehörigen Messungen wurden im Innentrommelprüfstand der BASt durchgeführt. Zum anderen wurden die fahrdynamischen Eigenschaften eines Fahrzeugs, das mit Run-Flat-Reifen ausgerüstet war, auf der Versuchsfläche der BASt untersucht. Im Rahmen einer Literaturrecherche wurde weiterhin das im Zusammenhang mit Run-Flat-Reifen stehende Thema Reifendruckkontrolle behandelt. Die Versuche zur Dauerhaltbarkeit der Reifen haben gezeigt, dass große Unterschiede bezüglich der erreichbaren Notlaufstrecke der Run-Flat-Reifen bestehen. Unter den Prüfbedingungen der BASt, die auch Phasen mit Verzögerungen, Beschleunigungen und Schräglauf enthielten, wurden teilweise die von den Herstellern vorgegebenen Strecken nicht erreicht, teilweise jedoch auch weit überschritten. In Bezug auf den Einfluss von Run-Flat-Reifen auf die fahrdynamischen Eigenschaften des Fahrzeugs ist festzustellen, dass die Run-Flat-Reifen im druckbehafteten Zustand Standardreifen in nichts nachstehen. Im drucklosen Zustand bieten sie noch gutes Fahrverhalten, wenn mit Standardreifen an eine Weiterfahrt nicht mehr zu denken ist. In Bezug auf die Fahrdynamik lassen sich bei den Run-Flat-Reifen untereinander kaum Unterschiede ausmachen. Das gilt auch für den Vergleich von Reifen mit verstärkter Seitenwand und Reifen mit innerem Stützring. Insgesamt stellen Run-Flat-Reifen einen deutlichen Sicherheitsgewinn gegenüber Standardreifen für den Fall eines Luftverlustes eines Reifens dar. Es hat sich herausgestellt, dass eine Druckkontrolle bei der Verwendung von Run-Flat-Reifen dringend zu empfehlen ist, da sonst ein Druckverlust eventuell nicht bemerkt wird. Dafür kommen sowohl direkte als auch indirekte Reifendruckkontrollsysteme in Frage. Die Ergebnisse zeigen weiterhin, dass eine Prüfprozedur für neue Typen von Run-Flat-Reifen erforderlich ist, um die erforderlichen Notlaufeigenschaften zu garantieren. Mit Hilfe von Seitenwandbeschriftungen am Reifen sollte der Nutzer auf Notlaufstrecke und -geschwindigkeit hingewiesen werden.
Das Auto gerät zunehmend in das Spannungsfeld zwischen dem Bedürfnis nach Mobilität und dem Umweltschutz. Viele Maßnahmen zur Reduzierung des Kraftstoffverbrauchs und der Schadstoffemission wurden bereits ergriffen. Nunmehr wird auch dem Rollwiderstand der Bereifung Beachtung geschenkt. Dem Autofahrer werden von mehreren Reifenherstellern sogenannte "rollwiderstandsarme" Reifen angeboten. In den Werbeaussagen der Hersteller wird eine Reduzierung des Rollwiderstandes mit bis zu 30 Prozent angegeben und eine Kraftstoffersparnis von bis zu 5 Prozent versprochen. Durch die Untersuchung der Bundesanstalt für Straßenwesen sollte diese Aussage überprüft werden. Dabei wurden im Prüfstand Fahrzeug/Fahrbahn ingesamt jeweils drei Reifen von drei Herstellern in zwei Reifengrößen (175/70 R13 T und 195/65 R15 H/V) als Normalversion und als rollwiderstandsarme Ausführung bei unterschiedlichen Geschwindigkeiten getestet. Gemessen an den Werbeaussagen konnte lediglich bei einem Reifenhersteller das gesteckte Ziel annähernd erreicht werden.
Die Forschungsarbeit hatte das Ziel, das Griffigkeitsverhalten von Spikesreifen gegenüber Normalreifen zu klären. Dazu wurden mit einer repräsentativen Auswahl neuer und gebrauchter Reifen auf Versuchsstrecken in Bayern und Nordrhein-Westfalen mit dem Stuttgarter Reibungsmesser Gleitreibungsbeiwerte gemessen. Die Messungen wurden vorgenommen auf Decken unterschiedlicher Bauart, bei trockenem und nassem Fahrbahnzustand und bei unterschiedlichen Deckentemperaturen. Aus den Messwerten konnten für vorgegebene Ausgangsgeschwindigkeiten die Bremswege der unterschiedlichen Reifen auf den verschiedenen Deckenarten berechnet werden. Die Bremswegunterschiede (in %) ermöglichten eine Bewertung der untersuchten Reifen- und Deckenarten. Auswahl der Messstrecken sowie Messmethoden und -Durchführung werden beschrieben, die Messergebnisse ausführlich dargestellt und gedeutet. Aus einem Stichprobenumfang von mehr als 6.000 Einzelbremsungen lässt sich als wesentliches Untersuchungsergebnis ableiten, dass Radial-M+S-Reifen mit Spikes im Neuzustand gegenüber unbespiketen Reifen im Mittel über alle untersuchten Deckenarten bei trockener Fahrbahn einen um 15 - 20 %, bei nasser Fahrbahn um 17 - 26 % längeren Bremsweg aufweisen. Bei der Gussasphaltstrecke betrug der Bremswegunterschied zwischen Neuzustand und Ende des Gebrauchszustandes 40 %. Die größten ermittelten Einzelwerte der Bremswegunterschiede zwischen Radial-Sommerreifen und Radial-M+S-Reifen mit Spikes lagen in der Größenordnung von 40 - 50 %.
Der Autor berichtet über zwei Forschungsprojekte zur Prüfung von runderneuerten Reifen durch Schnell- und Dauerlaufprüfung. Es wurden Pkw- und Lkw-Reifen mit Karkassen unterschiedlicher Hersteller und unterschiedlichen Alters mit und ohne reparierte Durchstoßschäden untersucht. Die Versuchsergebnisse spechen für eine Altersbegrenzung der rundzuerneuernden Karkassen auf 6 Jahre. Das Reparieren sollte nur bei der Runderneuerung von Lkw-Reifen toleriert werden. Eine Rückstufung der Geschwindigkeitsklassen nach Runderneuerung von Pkw-Reifen zeigt eine positive Wirkung.
Durch die Einführung des Airbags als zusätzliches Rückhaltesystem zum Sicherheitsgurt hat sich die Sicherheit für die Fahrzeuginsassen weiter erhöht. Die Airbagtechnologie wird nunmehr seit mehr als zehn Jahren serienmäßig verbaut. Nach wie vor berichten die Autofahrer aber immer wieder auch über Probleme mit dieser Technologie. Ziel dieser Arbeit ist es, geeignetes Datenmaterial aus dem realen Unfallgeschehen zu sammeln und daraus aktuelle Aussagen zur Schutzwirkung der Airbag-Technologie zu gewinnen. Darüber hinaus sollen aus dem Material auch Erkenntnisse über die Art, Häufigkeit und Ursachen der Probleme abgeleitet und damit Vorschläge für weitere Verbesserungen entwickelt werden. Die Datenbeschaffung erfolgt über eine Umfrage in den Zeitschriften der europäischen Automobilclubs. Zusammen mit dem Airbagmaterial der Versicherer stehen insgesamt 692 Fälle für die Auswertung zur Verfügung. Es ergibt sich, dass bei schweren Frontalkollisionen der Anteil an schweren bis tödlichen Verletzungen sowohl für den Fahrer als auch für den Beifahrer um gut 20 % niedriger ist als bei vergleichbaren Unfällen ohne Airbag. Auch die Seiten- und Kopfseiten-Airbags zeigen in Einzelfällen eine gute Schutzwirkung. Wegen der geringen Fallzahlen ist aber noch keine allgemeingültige Aussage möglich. Das Datenmaterial beinhaltet 78 Problemfälle im Zusammenhang mit der Airbag-Auslösung. Es handelt sich zum einen um ungerechtfertigte Auslösungen ohne Unfall oder bei geringer Unfallschwere, und zum anderen um Nichtauslösungen bei hoher Unfallschwere. Besonders auffällig sind hier die Nichtauslösungen beim Unterfahrunfall. Im Rahmen dieser Arbeit wurde auch ein Unterfahr-Test entwickelt, der in Zukunft im Rahmen der Airbag-Optimierung mit eingesetzt werden sollte. Im Datenmaterial befinden sich auch 92 Problemfälle mit Airbag-Aggressivität. Der häufigste Fall ist hier der Gehörschaden und zwar durch die Auslösung der Front-Airbags. Über gezielte Maßnahmen zur Schallpegelreduzierung bei der Airbag-Entfaltung, durch mehrstufige Airbagauslössung in Abhängigkeit von der Unfallschwere sowie durch Sitzbelegungserkennung könnten hier Verbesserungen erreicht werden. Zur Minimierung des Out-of-Position-Risikos sollte der FMVSS 208-Test mit 5 % Dummy in der vordersten Sitzposition bei die Airbag-Abstimmung eingesetzt werden. Die Airbag-Technologie hat die Insassensicherheit nachhaltig erhöht. Es ist aber noch ein großes Entwicklungspotential für weitere Verbesserungen vorhanden.
A biofidelic flexible pedestrian legform impactor (FlexPLI) has been developed from the year 2000 onwards and evaluated by a technical evaluation group (Flex-TEG) of UN-ECE GRSP. A recently established UN-ECE GRSP Informal Group on GTR9 Phase 2 is aiming at introducing the FlexPLI within world-wide regulations on pedestrian safety (Phase 2 of GTR No. 9 as well as the new UN regulation 127 on pedestrian safety) as a test tool for the assessment of lower extremity injuries in lateral vehicle-to-pedestrian accidents. Besides, the FlexPLI has already been introduced within JNCAP and is on the Euro NCAP roadmap for 2014. Despite of the biofidelic properties in the knee and tibia sections, several open issues related to the FlexPLI, like the estimation of the cost benefit, the feasibility of vehicle compliance with the threshold values, the robustness of the impactor and of the test results, the comparability between prototype and production level and the finalization of certification corridors still needed to be solved. Furthermore, discussions with stakeholders about a harmonized lower legform to bumper test area are still going on. This paper describes several studies carried out by the Federal Highway Research Institute (BASt) regarding the benefit due to the introduction of the FlexPLI within legislation for type approval, the robustness of test results, the establishment of new assembly certification corridors and a proposal for a harmonized legform to bumper test area. Furthermore, a report on vehicle tests that previously had been carried out with three prototype legforms and were now being repeated using legforms with serial production status, is given. Finally, the paper gives a status report on the ongoing simulation and testing activities with respect to the development and evaluation of an improved test procedure with upper body mass for assessing pedestrian femur injuries.
The evaluation of the expected benefit of active safety systems or even ideas of future systems is challenging because this has to be done prospectively. Beside acceptance, the predicted real-world benefit of active safety systems is one of the most important and interesting measures. Therefore, appropriate methods should be used that meet the requirements concerning representativeness, robustness and accuracy. The paper presents the development of a methodology for the assessment of current and future vehicle safety systems. The variety of systems requires several tools and methods and thus, a common tool box was created. This toolbox consists of different levels, regarding different aspects like data sources, scenarios, representativeness, measures like pre-crash-simulations, automated crash computation, single-case-analyses or driving simulator studies. Finally, the benefit of the system(s) is calculated, e.g. by using injury risk functions; giving the number of avoided/mitigated accidents, the reduction of injured or killed persons or the decrease of economic costs.
In road traffic accidents, a car-seat and its occupant can be subjected to various crash pulses in the case of a rear impact. This study investigates the influence of crash pulse shape on seat-occupant response and evaluates the corresponding risk of whiplash injury. For this purpose, a rigorously validated seat-occupant system model is used to study different carseat designs and crash pulses. Two different car-seat concepts are also presented which can effectively mitigate whiplash injury for a wide range of crash severity. It is shown that for crash pulses of similar severity, the level of whiplash-risk depends strongly on the combined effects of seat design and crash pulse shape.
Since its creation in 2011 the Pre-Crash-Matrix (PCM) offers the possibility to observe the pre-crash phase until five seconds before crash for a wide range of accidents. Currently the PCM contains more than 8.000 reconstructed accidents out of the GIDAS (German In-Depth Accident Study) database and is enlarged continuously by more than 1.000 cases per year. Hence, a detailed investigation of active safety systems in real accident situations has been made feasible. The PCM contains all relevant data in database format to simulate the pre-crash phase until the first collision of the accident for a maximum of two participants. This includes the definition of the participants and their characteristics, the dynamic behavior of the participants as time-dependent course for five seconds before crash as well as the geometry of the traffic infrastructure. The digital sketch of the accident and information from GIDAS as well as from supplementary databases represent the main input for the simulation of the pre-crash phase of an accident with the VUFO simulation model VAST (Vufo Accident Simulation Tool). This simulation in turn embodies the foundation of the PCM. The PCM underlies continual improvements and enhancements in consultation with its users. In addition to collisions of cars with other cars, pedestrians, bicycles and motorcycles the PCM now also covers car to object and car to truck collisions. The paper illustrates car to truck collisions as a showcase and explains perspectives for further developments. In 2016 a more detailed definition of the contour of the vehicle was added. Furthermore, the geometrical surroundings of the accident site will be provided in a new structure with a higher level of detail. Thus, a precise classification of road marks and objects is possible to further improve the support of developing and evaluating ADAS. This paper gives an overview about the latest developments of the PCM with its innovations and provides an outlook to upcoming enhancements. Besides potential areas of application for the development of ADAS are shown.
Automated driving will provide many kinds of benefits - some direct and some indirect. The benefits originate at the individual level, from changes in the behaviour of drivers and travellers with regard to driving and mobility, ending up with benefits at the social level via changes in the whole transport system and society, where many of the current planning and operations paradigms are likely to be transformed by automated driving. There may also be disbenefits, particularly at a social level, for example in intensity of travel which could result in additional congestion and increased use of natural resources. There may also be unintended consequences. For example, we do not know the impacts on public transport: driverless vehicles could provide a means to a lower cost service provision, but the availability of automated cars could lead to more car travel at the expense of collective transport.
Established in 1997, the European New Car Assessment Programme (Euro NCAP) provides consumers with a safety performance assessment for the majority of the most popular cars in Europe. Thanks to its rigorous crash tests, Euro NCAP has rapidly become an important driver safety improvement to new cars. After ten years of rating vehicles, Euro NCAP felt that a change was necessary to stay in tune with rapidly emerging driver assistance and crash avoidance systems and to respond to shifting priorities in road safety. A new overall rating system was introduced that combines the most important aspects of vehicle safety under a single star rating. The overall rating system has allowed Euro NCAP to continue to push for better fitment and higher performance for vehicles sold on the European market. In the coming years, the safety rating is expected to play an important role in the support of the roll-out of highly automated vehicles.
During the last 5 years, the number of cars fitted with side airbags has dramatically increased. They are now standard equipment, even on many smaller cars or less luxurious vehicles. While some side airbags offer thoracic protection alone, there are those that combine thoracic and head protection (of which most deploy from the seat). Other systems employ separate airbags for head and thorax protection, which are designed to be effective noticeably in a crash against a pole. This paper proposes an evaluation of the effectiveness of side airbags in preventing thoracic injuries to passenger car occupants involved in side crashes. First, the target population (who can take benefit of side airbag deployment and in what circumstances) is defined. Side airbags can be especially effective in cases of impacts on the door with intrusion at a certain impact speed. Then, an example case of a side impact with side airbag deployment is given were side airbag deployment is thought to have had a positive effect on injury outcome. A further case is presented where the impact configuration is likely to have reduced the effect of side airbag deployment on injury outcome. Finally, the estimation of side airbag effectiveness (in terms of additional occupant protection brought exclusively by the airbag) is proposed by comparing injury risk sustained by occupants in (more or less) similar cars (fitted or non fitted with airbags) because, during these years, car structure, and side airbag conception have considerably evolved. In-depth accident data from France, the UK and Germany has been collected. Out of 2,035 side impact accident cases available in the databases, we selected 435 occupants of passenger cars (built from 1998 onwards) involved in an injury accident between year 1998 and year 2004 for EES (Energy Equivalent Speed) values between 20km/h and 50km/h. The occupants, belted or not, were sat on the struck side, whatever the obstacle and type of accidents (intersection, loss of control, etc.). For multiple impact crashes, the side impact is assumed to be the more severe one. Passenger cars were fitted with (96) or without (339) side airbags. Most of the potential risk explanatory variables were correctly and reliably reported in the databases (velocity " impact zone " impact angle " occupant characteristics, etc.). The analysis compared injury risks for different levels of EES and different types of side airbags. A logistic regression model was also computed with injury variables (such as thoracic AIS 2+ or AIS 3+) as the dependant variable and other variables (including airbag type and EES) as explanatory injury risk factors. Results revealed statistically non-significant reductions in thoracic AIS 2+ and AIS 3+ injury risk in side airbag equipped cars in the impact violence range selected (odds ratio between 0.84 and 0.98 depending on types of airbags). The results are discussed. The non-significance is assumed to be due to a low number of cases. Statistical analysis for head injuries was not possible due to the low number of accident cases with passenger cars fitted with head airbags in the databases. Moreover, the discrepancies between the data coming from different countries (especially calculation of EES) might have introduced instability in the analysis.
This study is aimed to investigate the correlations of impact conditions and dynamic responses with the injuries and injury severity of child pedestrians by accident reconstruction. For this purpose, the pedestrian accident cases were selected from Sweden and Germany with detailed information about injuries, accident cars, and accident environment. The selected accident cases were reconstructed using mathematical models of pedestrian and passenger car. The pedestrian models were generated based on the height, weight, and age of the pedestrian involved in accidents. The car models were built up based on the corresponding accident car. The impact speeds in simulations were defined based on the reported data. The calculated physical quantities were analyzed to find the correlation with injury outcomes registered in the accident database. The reconstruction approaches are discussed in terms of data collection, estimating vehicle impact speeds, pedestrian moving speeds and initial posture, secondary ground impact, validity of the mathematical models, as well as impact biomechanics.
The current Brussels EU Regulation No. 1235/2011, valid from May 30, 2012, has introduced an European Tyre Label with wet grip index G classes from A to G for passenger car tyres C1, light commercial vehicles tyres C2 and heavy truck- and bus tyres C3. Every wet grip class for each vehicle category has a defined band of numerical values for the wet grip index G. The legislated wet grip values G in this EU- Regulation are very low. The measured braking distances and corresponding impact speeds of the test vehicles are showing very critical results. Regulation No. 1235/2011 of the European Parliament and the Council for Type Approval of Vehicles (EU) should be changed in such a way, that for C1-tyres (normal passenger cars tyres) the minimum wet grip index G is 1.25. All C2-tyres (light commercial vehicles tyres) should at least meet a minimum wet grip index of G = 1.1. All C3-tyres (heavy trucks and buses tyres) should at least meet a minimum wet grip index of G = 0.95. Due to the missing lower limits for G in the wet grip class F for C1, C2 and C3 tyres according to Commission Regulation (EU) No. 1235/2011, officially valid from 30 May 2012, a tyre-to-road coefficient of adhesion in the extreme of 0 (zero) is legally permitted. This is an apparent flaw in above cited EU Regulation, which causes a potential danger to the road traffic safety for all motor vehicles in Europe with such tyres. The wet grip class F has to be removed urgently from said EURegulation, since a direct liability of the responsible EU-Commission can not be excluded.
Past European collaborative research involving government bodies, vehicle manufacturers and test laboratories has resulted in a prototype barrier face called the Advanced European Mobile Deformable Barrier (AE-MDB) for use in a new side impact test procedure . This procedure offers a better representation of the current accident situation and, in particular, the barrier concept is a better reflection of front-end stiffness seen in today- passenger car fleet compared to that of the current legislative barrier face. Based on the preliminary performance corridors of the prototype AE-MDB, a refined AE-MDB specification has been developed. A programme of barrier to load cell wall testing was undertaken to complete and standardise the AE-MDB specification. Barrier faces were supplied by the four leading manufacturers to demonstrate that the specification could be met by all. This paper includes background, specification and proof of compliance.
Rear-end collisions are the most frequent same and opposite-direction crashes. Common causes include momentary inattention, inadequate speed or inadequate distance. While most rear-end collisions in urban traffic only result in vehicle damage or slight injuries, rear-end collisions outside built-up areas or on motorways usually cause fatal or serious injuries. Driver assistance systems that detect dangerous situations in the longitudinal vehicle direction are therefore an essential safety plus. In view of this, for ADAC, systems that alert drivers to dangerous situations and initiate autonomous braking complement ESC as one of the most important active safety features in modern vehicles. The aim of ADAC is to provide consumers with technical advice and competent information about the systems available on the market. Reliable comparative tests that are based on standardised test criteria may provide motorists with important information and help them make a buying decision. In addition, they raise consumer awareness of the systems and speed up their market penetration. The assessment must focus on as many aspects of effectiveness as possible and include not only autonomous braking but also collision warning and autonomous brake assist. The work of the ADAC accident research is the development of the testing scenarios with direct link to accident situations and the identification of useful test criteria for testing.
Impact severity is a fundamental measure for all in-depth crash investigation projects. One methodology used in the UK is based on the US Calspan software package CRASH3. The UK- in-depth crash investigation studies routinely use AiDamage3 a software package which is based on an updated version of the original CRASH3 algorithm, including enhancements to the vehicle stiffness coefficients. Real world accident-damaged vehicles are measured and their crush is correlated with a library of stiffness coefficients. These measurements are then used, along with other parameters, to calculate the crash energy and equivalent changes of velocity of the vehicles (delta-v), which is a measure of the impact severity. UK in-depth accident studies routinely validate the crash severity methodologies applied as the vehicle fleet changes. This is achieved by analysing crash test data and using the appropriate residual crush damage and other inputs to AiDamage3 and checking the program- outputs with the known crash severity parameters. This procedure checks, at least in part, the default stiffness values in the data libraries and the reconstruction methods used.
Testverfahren zur Bewertung und Verbesserung von Kinderschutzsystemen beim Pkw-Seitenaufprall
(2003)
Die gegenwärtige europäische Regelung zur Prüfung und Zulassung von Kinderschutzsystemen (KSS) für Pkw (ECE-R44-03) beinhaltet dynamische Tests zur Frontal- und Heckaufprallsimulation. Der Seitenaufprall ist bisher nicht berücksichtigt, obwohl die Verletzungsschwere und die Folgekosten groß sind. Im Gegensatz zum Frontal- und Heckaufprall ist der Seitenaufprall gekennzeichnet durch eine direkte Lasteinleitung durch intrudierende Strukturen. Das Kinderschutzsystem und das Kind werden durch große Kontaktkräfte direkt beaufschlagt. Verletzungen des Kopfes und Halsbereichs von Kindern in KSS sind hierbei häufig und schwer. Seit 1993 beschäftigt sich daher eine ISO-Arbeitsgruppe (International Standardization Organisation) mit der Entwicklung eines Testverfahrens zur Prüfung von KSS beim Seitenaufprall. Die Ziele und entsprechende Ideen sowie Konzepte beteiligter Parteien sind bis heute kontrovers, so dass bisher keine endgültige Einigung im Rahmen der Arbeitsgruppe erzielt werden konnte. Ziel der vorliegenden Arbeit als Abschluss eines Projekts der BASt (Bundesanstalt für Straßenwesen) und dem Fachgebiet Kraftfahrzeuge der TU Berlin ist es, die komplexe Problematik zu dem Thema umfassend darzustellen und gleichzeitig einen ganzheitlichen Lösungsvorschlag anzubieten. Hierzu sind die Teilergebnisse der ISO-Arbeitsgruppe im ersten Schritt strukturiert und analysiert worden. Wissenslücken wurden detektiert und in einem weiteren Schritt beseitigt. Alle Teilergebnisse wurden im Rahmen der ISO-Arbeitsgruppe präsentiert, diskutiert und größtenteils auch akzeptiert. Der aktuelle Stand der ISO-WG1 ist somit maßgeblich von den hier erzielten Ergebnissen beeinflusst. Als Kern der vorliegenden Arbeit ist an der TU Berlin das Konzept für ein Testverfahren entwickelt, umgesetzt und geprüft worden. Die wesentlichen Parameter des realen Seitenaufpralls wie: - Beschleunigungsniveau des gestoßenen Pkw, - Delta-v des gestoßenen Pkw, - Maximalintrusion beim gestoßenen Pkw sowie - die maximale Intrusionsgeschwindigkeit im Kopfbereich sind wiedergegeben. In Abgrenzung zu aktuellen, komplexen Schlittentestverfahren, die z.B. zur Entwicklung von Seitenairbags dienen, ist die statische und dynamische Intrusionsgestalt einer realen Pkw-Seitenstruktur hingegen stark vereinfacht, aber ausreichend dargestellt. Die Ergebnisse zeigen, dass es prinzipiell möglich ist, das Schutzpotential von rückwärtsgerichteten sowie vorwärtsgerichteten KSS mit dieser Prozedur zu analysieren. Die Seitenaufprallabbildungsgüte ist hoch bei einer gleichzeitig sehr guten Reproduzierbarkeit der Messergebnisse. So zeigen die Tests, dass die Kinematik des Kopf- und Halsbereichs im Wesentlichen von der Gestalt des KSS im Seitenbereich abhängig ist. Ausreichend große Seitenwangen können den Kopf flächig stützen und vermeiden so den direkten Kontakt zu intrudierenden Strukturen. Gleichzeitig wird die starke laterale Inklination der Halswirbelsäule reduziert. Die Belastungen am Kopf sind aber bei allen getesteten KSS hoch und liegen deutlich oberhalb diskutierter Grenzwerte. Bei genauer Betrachtung der KSS-Seitenwangenpolsterung fällt auf, dass diese entweder gar nicht oder nur rudimentär vorhanden ist. Modifikationen, die abschließend an KSS vorgenommen wurden, zeigen aber auf, dass bereits durch einfache technische Maßnahmen die Belastungen im Kopfbereich signifikant gesenkt werden können. Das mit dieser Arbeit vorgelegte Testverfahren bietet KSS-Herstellern wie auch dem Gesetzgeber die Möglichkeit, Schwächen von KSS aufzudecken und Modifikationen zielgerichtet durchzuführen. Durch die Berücksichtigung des realen Seitenaufpralls ist gewährleistet, dass alle Optimierungen seitens der KSS-Hersteller auch positiven Einfluss auf die passive Sicherheit von Kindern in Pkw haben können. Eine maximale Reduktion der schwer bzw. tödlich verletzten Kinder als Pkw-Insassen in Höhe von ca. 10% ist bei 100%-iger Marktdurchdringung mit optimal gestalteten Produkten realistisch. Dies entspricht einer Verringerung der Anzahl getöteter Kinder um ca. 10 sowie schwerverletzter Kinder um ca. 200 pro Jahr in Deutschland.
Side-impact safety of passenger cars is assessed in Europe in a full-scale test using a moving barrier. The front of this barrier is deformable and represents the stiffness of an 'average' car. The EU Directive 96/27/EC on side impact protection has adopted the EEVC Side Impact Test Procedure, including the original performance specification for the barrier face when impacting a flat dynamometric rigid wall. The requirements of the deformable barrier face, as laid down in the Directive, are related to geometrical characteristics, deformation characteristics and energy dissipation figures. Due to these limited requirements, many variations are possible in designing a deformable barrier face. As a result, several barrier face designs are in the market. However, research institutes and car manufacturers report significant difference in test results when using these different devices. It appears that the present approval test is not able to distinguish between the different designs that may perform differently when they impact real vehicles. Therefore, EEVC Working Group 13 has developed a number of tests to evaluate the different designs. In these tests the barrier faces are loaded and deformed in a specific and/or more representative way. Barrier faces of different design have been evaluated. In the paper the set-up and the reasoning behind the tests is presented. Results showing specific differences in performance are demonstrated.