91 Fahrzeugkonstruktion
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (109)
- Buch (Monographie) (60)
- Wissenschaftlicher Artikel (5)
- Bericht (5)
- Teil eines Buches (Kapitel) (3)
- Arbeitspapier (1)
Schlagworte
- Deutschland (89)
- Germany (89)
- Conference (79)
- Konferenz (78)
- Safety (53)
- Sicherheit (52)
- Research report (45)
- Forschungsbericht (44)
- Bewertung (39)
- Evaluation (assessment) (38)
- Accident (36)
- Test (36)
- Unfall (36)
- Versuch (36)
- Fahrzeug (32)
- Passives Sicherheitssystem (32)
- Simulation (32)
- Car (29)
- Prüfverfahren (29)
- Anfahrversuch (28)
- Fahrerassistenzsystem (28)
- Injury (27)
- Test method (27)
- Vehicle (27)
- Passive safety system (26)
- Verletzung (26)
- Driver assistance system (25)
- Active safety system (22)
- Pedestrian (22)
- Pkw (22)
- Aktives Sicherheitssystem (21)
- Collision (21)
- Fußgänger (21)
- Impact test (veh) (21)
- Schweregrad (Unfall, Verletzung) (20)
- Severity (accid, injury) (20)
- Zusammenstoß (20)
- Analyse (math) (19)
- Driver (19)
- Unfallrekonstruktion (19)
- Analysis (math) (18)
- Fahrer (18)
- Insasse (18)
- Leistungsfähigkeit (allg) (18)
- Unfallverhütung (18)
- Efficiency (17)
- Anthropometric dummy (16)
- Frontalzusammenstoß (16)
- Head on collision (16)
- Vehicle occupant (16)
- Accident prevention (15)
- Prevention (15)
- Schweregrad (Unfall (14)
- Verletzung) (14)
- injury) (14)
- Dummy (13)
- Statistics (13)
- Braking (12)
- Bremsung (12)
- Fahrstabilität (12)
- Motorrad (12)
- Reconstruction (accid) (12)
- Severity (accid (12)
- Statistik (12)
- Vehicle handling (12)
- Driving (veh) (11)
- Fahrzeugführung (11)
- Kind (11)
- Measurement (11)
- Messung (11)
- Motorcycle (11)
- Radfahrer (11)
- Child (10)
- Cyclist (10)
- Development (10)
- Entwicklung (10)
- Europa (10)
- Europe (10)
- Fahrzeugsitz (10)
- Lorry (10)
- Method (10)
- Risk (10)
- Seitlicher Zusammenstoß (10)
- Verfahren (10)
- Verhalten (10)
- Antikollisionssystem (9)
- Behaviour (9)
- Lkw (9)
- Risiko (9)
- Seat (veh) (9)
- Side impact (9)
- Airbag (8)
- Auffahrunfall (8)
- Datenbank (8)
- Fehler (8)
- Impact test (8)
- Improvement (8)
- Sicherheitsgurt (8)
- Verbesserung (8)
- Accident reconstruction (7)
- Anti locking device (7)
- Articulated vehicle (7)
- Belastung (7)
- Benutzung (7)
- Berechnung (7)
- Biomechanics (7)
- Biomechanik (7)
- Bremse (7)
- Bus (7)
- Collision avoidance system (7)
- Delivery vehicle (7)
- Electronic stability program (7)
- Error (7)
- Gelenkfahrzeug (7)
- Geschwindigkeit (7)
- Head (7)
- Interior (veh) (7)
- Interview (7)
- Kopf (7)
- Load (7)
- Mathematical model (7)
- On the spot accident investigation (7)
- PKW (7)
- Rear end collision (7)
- Rechenmodell (7)
- Safety belt (7)
- Speed (7)
- Use (7)
- Verhütung (7)
- Verminderung (7)
- Überschlagen (7)
- Antiblockiereinrichtung (6)
- Ausrüstung (6)
- Brake (6)
- Calculation (6)
- Cause (6)
- Data bank (6)
- Decrease (6)
- Elektronisches Stabilitätsprogramm (6)
- Equipment (6)
- Fahrzeuginnenraum (6)
- Motorcyclist (6)
- Motorradfahrer (6)
- Prognose (6)
- Richtlinien (6)
- Risikobewertung (6)
- Risk assessment (6)
- Sichtbarkeit (6)
- Specifications (6)
- Technologie (6)
- Technology (6)
- Untersuchung am Unfallort (6)
- Ursache (6)
- Sichtbarkeit (6)
- Weight (6)
- Windschutzscheibe (6)
- Alte Leute (5)
- Attitude (psychol) (5)
- Automatisch (5)
- Cervical vertebrae (5)
- Coach (5)
- Compatibility (5)
- Deformation (5)
- Einstellung (psychol) (5)
- Emission (5)
- Fatality (5)
- Gesetzgebung (5)
- Halswirbel (5)
- Japan (5)
- Knee (human) (5)
- Kompatibilität (5)
- Legislation (5)
- Lenken (Fahrzeug) (5)
- Overturning (veh) (5)
- Reisebus (5)
- Sensor (5)
- Standardisierung (5)
- Standardization (5)
- Steering (process) (5)
- Traffic (5)
- Tödlicher Unfall (5)
- Vehicle regulations (5)
- Verkehr (5)
- Age (4)
- Air bag (restraint system) (4)
- Alter (4)
- Attention (4)
- Aufmerksamkeit (4)
- Aufprallschlitten (4)
- Automatic (4)
- Autonomes Fahren (4)
- Autonomous driving (4)
- Baustoff (4)
- Brustkorb (4)
- Cost benefit analysis (4)
- Damage (4)
- Data acquisition (4)
- Datenerfassung (4)
- Deformable barrier (impact test) (4)
- Deformierbare Barriere (Anpralltest) (4)
- Detection (4)
- Digital model (4)
- Driver information (4)
- Driver training (4)
- Dynamics (4)
- Dynamik (4)
- Eigenschaft (4)
- Electric vehicle (4)
- Elektrofahrzeug (4)
- Fahrzeugteil (Sicherheit) (4)
- Fire (4)
- Forecast (4)
- Forschungsarbeit (4)
- Gewicht (4)
- Impact sled (4)
- Kleintransporter (4)
- Knie (menschl) (4)
- Kontrolle (4)
- Kunststoff (4)
- Lieferfahrzeug (4)
- Lärm (4)
- Modification (4)
- Noise (4)
- Numerisches Modell (4)
- Old people (4)
- Perception (4)
- Properties (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Sachschaden (4)
- Schutz (4)
- Surveillance (4)
- Technische Vorschriften (Kraftfahrzeug) (4)
- Telematik (4)
- Thorax (4)
- USA (4)
- Verformung (4)
- Wahrnehmung (4)
- Windscreen (veh) (4)
- Wirtschaftlichkeitsrechnung (4)
- Accident rate (3)
- Activity report (3)
- Advanced driver assistance system (3)
- Autobahn (3)
- Autonomes Fahrzeug (3)
- Autonomous vehicle (3)
- Behinderter (3)
- Bein (menschl) (3)
- Bemessung (3)
- Bend (road) (3)
- Bremsweg (3)
- Detektion (3)
- Disabled person (3)
- Ergonomics (3)
- Ergonomie (3)
- Fahrassistenzsystem (3)
- Fahrausbildung (3)
- Fracht (3)
- France (3)
- Frankreich (3)
- Freight (3)
- Front (3)
- Head restraint (3)
- Headlamp (3)
- Impact study (3)
- Knotenpunkt (3)
- Kopfstütze (3)
- Leg (human) (3)
- Location (3)
- Market (3)
- Markt (3)
- Material (constr) (3)
- Modell (3)
- Motorway (3)
- Norm (tech) (3)
- Ort (Position) (3)
- Plastic material (3)
- Reflectivity (3)
- Reflexionsgrad (3)
- Reifen (3)
- Research project (3)
- Scheinwerfer (3)
- Seite (3)
- Side (3)
- Specification (standard) (3)
- Straßenkurve (3)
- Straßenverkehr (3)
- Surfacing (3)
- Tunnel (3)
- Tyre (3)
- Tätigkeitsbericht (3)
- Unfallhäufigkeit (3)
- Vehicle safety device (3)
- Versuchspuppe (3)
- Veränderung (3)
- Abdomen (2)
- Accessibility (2)
- Automatische Notbremsung (2)
- Autonomous emergency braking (2)
- Baumusterzulassung (2)
- Beinahe Unfall (2)
- Bicycle (2)
- Body (car) (2)
- Braking distance (2)
- Brand (2)
- Classification (2)
- Communication (2)
- Components of the car (2)
- Contact (tyre road) (2)
- Correlation (math, stat) (2)
- Crash Test (2)
- Crashtest (2)
- Data security (2)
- Database (2)
- Datensicherheit (2)
- Decke (Straße) (2)
- Design (overall design) (2)
- EU (2)
- EU directive (2)
- EU-Richtlinie (2)
- Effectiveness (2)
- Einfahrt (2)
- Electronic driving aid (2)
- Entdeckung (2)
- Erfahrung (menschl) (2)
- Estimation (2)
- Experience (human) (2)
- Fahranfänger (2)
- Fahrdatenschreiber (2)
- Fahrerinformation (2)
- Fahrleistung (2)
- Fahrrad (2)
- Fahrsimulator (2)
- Fahrzeugteile (2)
- Feuer (2)
- Frau (2)
- Gas (2)
- Gravity (2)
- Griffigkeit (2)
- Haftung (jur) (2)
- Highway (2)
- Highway traffic (2)
- Human body (2)
- Human machine interface (2)
- Incident detection (2)
- Intelligent transport system (2)
- Inter urban (2)
- Intercity (2)
- Intersection (2)
- Karosserie (2)
- Klassifizierung (2)
- Kommunikation (2)
- Korrelation (math, stat) (2)
- Kreuzung (2)
- LKW (2)
- Leuchtdichte (2)
- Liability (2)
- Luminance (2)
- Masse (2)
- Mensch Maschine Schnittstelle (2)
- Menschlicher Körper (2)
- Merging traffic (2)
- Model (not math) (2)
- Nacht (2)
- Near miss (2)
- Night (2)
- Occupant (veh) (2)
- Official approval (2)
- Organisation (2)
- Organization (2)
- Passenger (2)
- Passenger transport (2)
- Passive restraint system (2)
- Personenbeförderung (2)
- Policy (2)
- Politik (2)
- Pollutant (2)
- Post crash (2)
- Probability (2)
- Psychological aspects (2)
- Psychologische Gesichtspunkte (2)
- Reaction (human) (2)
- Reaktionsverhalten (2)
- Recently qualified driver (2)
- Regression analysis (2)
- Regressionsanalyse (2)
- Report (2)
- Restraint system (2)
- Road construction (2)
- Schallpegel (2)
- Schweden (2)
- Schwerkraft (2)
- Simulator (driving) (2)
- Sound level (2)
- Spain (2)
- Spanien (2)
- Spinal column (2)
- Stability (Mechanics) (2)
- Stadt (2)
- Steifigkeit (2)
- Stiffness (2)
- Straße (2)
- Straßenbau (2)
- Stress (2)
- Stress (psychol) (2)
- Suspension (veh) (2)
- Telematics (2)
- Test procedures (2)
- Time (2)
- Toxicity (2)
- Toxizität (2)
- Traction control (2)
- Transport (2)
- United Kingdom (2)
- Unterleib (2)
- Urban area (2)
- Vehicle mile (2)
- Vehicles (2)
- Vereinigtes Königreich (2)
- Verkehrsinfrastruktur (2)
- Verkehrsverflechtung (2)
- Vorn (2)
- Wahrscheinlichkeit (2)
- Winkel (2)
- Wirbelsäule (2)
- Wirksamkeitsuntersuchung (2)
- Zeit (2)
- Abbiegen (1)
- Abgasnachbehandlung (1)
- Ablenkung (psychol) (1)
- Acceleration (1)
- Accuracy (1)
- Achslast (1)
- Active safety (1)
- Active safety system; Automatic; Brake; Car; Collision avoidance system; Conference; Driver assistance system; Germany; Impact test (veh); Rear end collision; Severity (accid (1)
- Adaptation (psychol) (1)
- Adaptive cruise control (1)
- Administration (1)
- Adolescent (1)
- Adult (1)
- Advanced vehicle control system (1)
- Aerodynamics (1)
- Aerodynamik (1)
- Aged people (1)
- Airbag (restraint system) (1)
- Aktive Sicherheit (1)
- Alternative energy (1)
- Angle (1)
- Angles (1)
- Angularity (1)
- Anhänger (1)
- Anpassung (allg) (1)
- Anpassung (psychol) (1)
- Anti blocking device (1)
- Antiblockiereinrichtung; Bewertung (1)
- Antiblockiersystem (1)
- Antrieb (tech) (1)
- Aptitude (1)
- Arbeitsgruppe (1)
- Atives Sicherheitssystem (1)
- Aufzeichung (1)
- Austria (1)
- Automobile (1)
- Automobiles (1)
- Axle load (1)
- Ballungsgebiet (1)
- Barrierefrei (1)
- Bau (1)
- Befreiung (Bergung) (1)
- Begrenzungsleuchten (1)
- Behavior (1)
- Beschleunigung (1)
- Bewehrung (1)
- Bibliographie (1)
- Bibliography (1)
- Bicyclist (1)
- Biomasse (1)
- Blendung (1)
- Blickfeld (1)
- Bodenhaftung (1)
- Bridge (1)
- Bruch (mech) (1)
- Brücke (1)
- Budget (1)
- Camera (1)
- Carbon dioxide (1)
- Caron monoxide (1)
- Chassis (1)
- Children (1)
- Clothing (1)
- Collision test (veh) (1)
- Colour (1)
- Combustion (1)
- Components of the vehicle (1)
- Computation (1)
- Construction (1)
- Contact (tyre (1)
- Control (1)
- Conurbation (1)
- Cooperative intelligent transport system (1)
- Crash test (1)
- Cross road (1)
- Cross roads (1)
- Customer (1)
- Cycle car (1)
- Damping (1)
- Data exchange (1)
- Data protection (1)
- Datenaustausch (1)
- Datenschutz (1)
- Dauer (1)
- Dauerhaftigkeit (1)
- Daytime running light (1)
- Deceleration (1)
- Decke (straße) (1)
- Demand (econ) (1)
- Design (Overall design) (1)
- Diffusion (1)
- Digital computer (1)
- Digitalrechner (1)
- Dimension (1)
- Displacement (1)
- Dissertation (1)
- Distraction (1)
- Distribution (gen) (1)
- Driving (1)
- Driving (veh) ; Evaluation (1)
- Driving aid (electronic) (1)
- Driving aptitude (1)
- Dtetection (1)
- Durability (1)
- Durchsichtigkeit (1)
- Dynamic penetration test (1)
- Dämpfung (1)
- Economic efficiency (1)
- Education (1)
- Effizienz (1)
- Eins (1)
- Ejection (1)
- Electric bicycle (1)
- Electronics (1)
- Elektrofahrrad (1)
- Elektronik (1)
- Elektronische Fahrhilfe (1)
- Elektronisches Stabilitätsprogram (1)
- Emergency (1)
- Emergency exit (1)
- Emission control (1)
- Emissionskontrolle (1)
- Empfindlichkeit (1)
- Energieeinsparung (1)
- Energy conservation (1)
- Entrance (1)
- Environmental compatibility (1)
- Environmental protection (1)
- Ermüdung (mater) (1)
- Erste Hilfe (1)
- Erwachsener (1)
- Erziehung (1)
- Eu (1)
- European Union (1)
- Evaluation (1)
- Event data recorder (Road vehicle) (1)
- Event data recorder (road vehicle) (1)
- Exhaust aftertreatment (1)
- Extrication (1)
- Fahrbare Barriere (1)
- Fahrer ; Fahrerassistenzsystem (1)
- Fahrerinformationen (1)
- Fahrerweiterbildung (1)
- Fahrtauglichkeit (1)
- Fahrtüchtigkeit (1)
- Fahrwerk (1)
- Fahrzeugdach (1)
- Fahrzeugflotte (1)
- Fahrzeugfuehrung (1)
- Fahrzeugmarkierung (1)
- Fahrzeugrückhaltesystem (1)
- Failure (1)
- Farbe (1)
- Fatigue (human) (1)
- Fatigue (mater) (1)
- Federung (1)
- Feinstaub (1)
- Field of vision (1)
- Finite element method (1)
- First aid (1)
- Fleet of vehicles (1)
- Force (1)
- Form (1)
- Four wheel drive (1)
- Frequency (1)
- Frequenz (1)
- Fuel (1)
- Fuel consumption (1)
- Fussgänger (1)
- Gefahr (1)
- Gemisch (1)
- Geometry (shape) (1)
- Gesetzesdurchführung (1)
- Glare (1)
- Goods traffic (1)
- Government (national) (1)
- Grenzwert (1)
- Güterverkehr (1)
- Halogen (1)
- Halogene (1)
- Head (human) (1)
- Height (1)
- Hell (1)
- Herausschleudern (1)
- Hinten (1)
- Homogeneity (1)
- Homogenität (1)
- Horizontal (1)
- Human factor (1)
- Hybrid vehicle (1)
- Hybridfahrzeug (1)
- Hydrocarbon (1)
- Höhe (1)
- Hüfte (menschl) (1)
- Inertia reel safety belt (1)
- Information (1)
- Information documentation (1)
- Infrastructure (1)
- Installation (1)
- Intelligentes Transportsystem (1)
- Intelligentes Verkehrssystem (1)
- International (1)
- Italien (1)
- Italy (1)
- Itinerary (1)
- Journey to school (1)
- Jugendlicher (1)
- Junction (1)
- Kamera (1)
- Karte (1)
- Kleidung (1)
- Kleinwagen (1)
- Knie (1)
- Kohlendioxid (1)
- Kohlenmonoxid (1)
- Kohlenwasserstoff (1)
- Kontakt Reifen Straße (1)
- Kontakt-Reifen-Straße (1)
- Kooperatives System (ITS) (1)
- Kopf (menschl) (1)
- Kraft (1)
- Kraftstoff (1)
- Kraftstoffverbrauch (1)
- Kunde (1)
- Körperstellung (1)
- Ladungssicherung (1)
- Landstraße (1)
- Lang-Lkw (1)
- Langfristig (1)
- Lap strap (1)
- Lateral collision (1)
- Law enforcement (1)
- Lebenszyklus (1)
- Leistungsfähigkeit (Allg.) (1)
- Lichtstärke (1)
- Life cycle (1)
- Light (colour) (1)
- Light commercial vehicle (1)
- Light intensity (1)
- Limit (1)
- Load fastening (1)
- Long term (1)
- Longer and heavier vehicle (1)
- Maintenance (1)
- Map (1)
- Massenunfall (1)
- Matrix (1)
- Menschlicher Faktor (1)
- Methode der finiten Elemente (1)
- Mixture (1)
- Mobile barrier (1)
- Model (not Math) (1)
- Montage (1)
- Moped (1)
- Motor (1)
- Multiple collision (1)
- Müdigkeit (1)
- Nachfrage (1)
- Nasse Straße (1)
- Nigeria (1)
- Nitrogen oxide (1)
- Notausgang (1)
- Notfall (1)
- Nummer (1)
- Oberbau (1)
- One (1)
- Optische Anzeige (1)
- Output (1)
- Overlapping (1)
- Overturning (1)
- Particulate matter (1)
- Pavement (1)
- Pelvis (1)
- Personality (1)
- Personenschaden (1)
- Persönlichkeit (1)
- Pfahl (1)
- Pile (1)
- Plastic (1)
- Police (1)
- Polizei (1)
- Portugal (1)
- Posture (1)
- Propulsion (1)
- Prototyp (1)
- Prototype (1)
- Prüefverfahren (1)
- Public transport (1)
- Quality assurance (1)
- Qualitätssicherung (1)
- Radar (1)
- Radio (1)
- Rammsondierung (1)
- Rear (1)
- Rear view mirror (1)
- Rechts (1)
- Recording (1)
- Reduction (decrease) (1)
- Reflectorized material (1)
- Reflexstoffe (1)
- Regierung (staat) (1)
- Reifenprofil (1)
- Reinforcement (in mater) (1)
- Reiseweg (1)
- Road network (1)
- Road traffic (1)
- Road user (1)
- Robot (1)
- Roboter (1)
- Roll over (veh) (1)
- Roof (veh) (1)
- Rotation (1)
- Rundfunk (1)
- Rural road (1)
- Rückspiegel (1)
- Safety fence (1)
- Safety glass (1)
- Safety harness (1)
- Safety system (1)
- Schall (1)
- Schlag (1)
- Schleudertrauma (1)
- Schulweg (1)
- Schutzeinrichtung (1)
- Seat (1)
- Seat belt (1)
- Seat harness (1)
- Sensitivity (1)
- Service station (1)
- Severity (accid, injuy) (1)
- Shock (1)
- Sicherheitsglas (1)
- Side light (1)
- Skid resistance (1)
- Skidding resistance (1)
- Social factors (1)
- Sound (1)
- Soziale Faktoren (1)
- Spreading (1)
- Stability (1)
- Stand der Technik (Bericht) (1)
- Standfestigkeit (1)
- State of the art report (1)
- Steuerung (1)
- Stickoxid (1)
- Stochastic process (1)
- Stochastischer Prozess (1)
- Stopping distance (1)
- Stossdämpfer (1)
- Straßennetz (1)
- Straßenverkehrsrecht (1)
- Störfall (1)
- Störfallentdeckung (1)
- Sweden (1)
- Tagesfahrlicht (1)
- Tankstelle (1)
- Technische Vorschriften (1)
- Telecommunication (1)
- Telefon (1)
- Telekommunikation (1)
- Telematic (1)
- Telematics; Traffic control (1)
- Telephone (1)
- Tension (1)
- Test Method (1)
- Thesis (1)
- Traffic count (1)
- Traffic regulations (1)
- Traffic survey (1)
- Trailer (1)
- Transparent (1)
- Transport infrastructure (1)
- Trend (stat) (1)
- Truck (1)
- Tunnels (1)
- Turn (1)
- Tyre tread (1)
- Umweltfreundlichkeit (1)
- Umweltschutz (1)
- Underride prevention (1)
- Unfallfolgemaßnahme (1)
- Unfallfolgephase (1)
- Unfallverhütug (1)
- United Nations (1)
- United kingdom (1)
- Unterfahrschutz (1)
- Unterhaltung (1)
- Untersuchung am Umfallort (1)
- Usa (1)
- Vehicle marking (conspicuity) (1)
- Vehicle restraint system (1)
- Verbrennung (1)
- Vereinigtes Königreichl (1)
- Vereinte Nationen (1)
- Verkehrserhebung (1)
- Verkehrssteuerung (1)
- Verkehrsteilnehmer (1)
- Verkehrsuntersuchung (1)
- Vermeidung (1)
- Verschiebung (1)
- Verteilung (allg) (1)
- Verteilung (mater) (1)
- Vertical (1)
- Vertikal (1)
- Verwaltung (1)
- Verzögerung (1)
- Vierradantrieb (1)
- Visual display (1)
- Vorne (1)
- Warning (1)
- Warnung (1)
- Wet road (1)
- Whiplash injury (1)
- Window (veh) (1)
- Windshield (1)
- Wirkungsanalyse (1)
- Wirtschaftlichkeit (1)
- Woman (1)
- Women (1)
- Working group (1)
- Zahl (1)
- Zug (mech) (1)
- Zugänglichkeit (1)
- Zusammenstoss (1)
- efficiency (1)
- head (1)
- material (constr) (1)
- road) (1)
- Öffentlicher Verkehr (1)
- Österreich (1)
- Überdeckung (1)
Institut
- Sonstige (183) (entfernen)
Automated driving will provide many kinds of benefits - some direct and some indirect. The benefits originate at the individual level, from changes in the behaviour of drivers and travellers with regard to driving and mobility, ending up with benefits at the social level via changes in the whole transport system and society, where many of the current planning and operations paradigms are likely to be transformed by automated driving. There may also be disbenefits, particularly at a social level, for example in intensity of travel which could result in additional congestion and increased use of natural resources. There may also be unintended consequences. For example, we do not know the impacts on public transport: driverless vehicles could provide a means to a lower cost service provision, but the availability of automated cars could lead to more car travel at the expense of collective transport.
Established in 1997, the European New Car Assessment Programme (Euro NCAP) provides consumers with a safety performance assessment for the majority of the most popular cars in Europe. Thanks to its rigorous crash tests, Euro NCAP has rapidly become an important driver safety improvement to new cars. After ten years of rating vehicles, Euro NCAP felt that a change was necessary to stay in tune with rapidly emerging driver assistance and crash avoidance systems and to respond to shifting priorities in road safety. A new overall rating system was introduced that combines the most important aspects of vehicle safety under a single star rating. The overall rating system has allowed Euro NCAP to continue to push for better fitment and higher performance for vehicles sold on the European market. In the coming years, the safety rating is expected to play an important role in the support of the roll-out of highly automated vehicles.
During the last 5 years, the number of cars fitted with side airbags has dramatically increased. They are now standard equipment, even on many smaller cars or less luxurious vehicles. While some side airbags offer thoracic protection alone, there are those that combine thoracic and head protection (of which most deploy from the seat). Other systems employ separate airbags for head and thorax protection, which are designed to be effective noticeably in a crash against a pole. This paper proposes an evaluation of the effectiveness of side airbags in preventing thoracic injuries to passenger car occupants involved in side crashes. First, the target population (who can take benefit of side airbag deployment and in what circumstances) is defined. Side airbags can be especially effective in cases of impacts on the door with intrusion at a certain impact speed. Then, an example case of a side impact with side airbag deployment is given were side airbag deployment is thought to have had a positive effect on injury outcome. A further case is presented where the impact configuration is likely to have reduced the effect of side airbag deployment on injury outcome. Finally, the estimation of side airbag effectiveness (in terms of additional occupant protection brought exclusively by the airbag) is proposed by comparing injury risk sustained by occupants in (more or less) similar cars (fitted or non fitted with airbags) because, during these years, car structure, and side airbag conception have considerably evolved. In-depth accident data from France, the UK and Germany has been collected. Out of 2,035 side impact accident cases available in the databases, we selected 435 occupants of passenger cars (built from 1998 onwards) involved in an injury accident between year 1998 and year 2004 for EES (Energy Equivalent Speed) values between 20km/h and 50km/h. The occupants, belted or not, were sat on the struck side, whatever the obstacle and type of accidents (intersection, loss of control, etc.). For multiple impact crashes, the side impact is assumed to be the more severe one. Passenger cars were fitted with (96) or without (339) side airbags. Most of the potential risk explanatory variables were correctly and reliably reported in the databases (velocity " impact zone " impact angle " occupant characteristics, etc.). The analysis compared injury risks for different levels of EES and different types of side airbags. A logistic regression model was also computed with injury variables (such as thoracic AIS 2+ or AIS 3+) as the dependant variable and other variables (including airbag type and EES) as explanatory injury risk factors. Results revealed statistically non-significant reductions in thoracic AIS 2+ and AIS 3+ injury risk in side airbag equipped cars in the impact violence range selected (odds ratio between 0.84 and 0.98 depending on types of airbags). The results are discussed. The non-significance is assumed to be due to a low number of cases. Statistical analysis for head injuries was not possible due to the low number of accident cases with passenger cars fitted with head airbags in the databases. Moreover, the discrepancies between the data coming from different countries (especially calculation of EES) might have introduced instability in the analysis.
This study is aimed to investigate the correlations of impact conditions and dynamic responses with the injuries and injury severity of child pedestrians by accident reconstruction. For this purpose, the pedestrian accident cases were selected from Sweden and Germany with detailed information about injuries, accident cars, and accident environment. The selected accident cases were reconstructed using mathematical models of pedestrian and passenger car. The pedestrian models were generated based on the height, weight, and age of the pedestrian involved in accidents. The car models were built up based on the corresponding accident car. The impact speeds in simulations were defined based on the reported data. The calculated physical quantities were analyzed to find the correlation with injury outcomes registered in the accident database. The reconstruction approaches are discussed in terms of data collection, estimating vehicle impact speeds, pedestrian moving speeds and initial posture, secondary ground impact, validity of the mathematical models, as well as impact biomechanics.
The current Brussels EU Regulation No. 1235/2011, valid from May 30, 2012, has introduced an European Tyre Label with wet grip index G classes from A to G for passenger car tyres C1, light commercial vehicles tyres C2 and heavy truck- and bus tyres C3. Every wet grip class for each vehicle category has a defined band of numerical values for the wet grip index G. The legislated wet grip values G in this EU- Regulation are very low. The measured braking distances and corresponding impact speeds of the test vehicles are showing very critical results. Regulation No. 1235/2011 of the European Parliament and the Council for Type Approval of Vehicles (EU) should be changed in such a way, that for C1-tyres (normal passenger cars tyres) the minimum wet grip index G is 1.25. All C2-tyres (light commercial vehicles tyres) should at least meet a minimum wet grip index of G = 1.1. All C3-tyres (heavy trucks and buses tyres) should at least meet a minimum wet grip index of G = 0.95. Due to the missing lower limits for G in the wet grip class F for C1, C2 and C3 tyres according to Commission Regulation (EU) No. 1235/2011, officially valid from 30 May 2012, a tyre-to-road coefficient of adhesion in the extreme of 0 (zero) is legally permitted. This is an apparent flaw in above cited EU Regulation, which causes a potential danger to the road traffic safety for all motor vehicles in Europe with such tyres. The wet grip class F has to be removed urgently from said EURegulation, since a direct liability of the responsible EU-Commission can not be excluded.
Past European collaborative research involving government bodies, vehicle manufacturers and test laboratories has resulted in a prototype barrier face called the Advanced European Mobile Deformable Barrier (AE-MDB) for use in a new side impact test procedure . This procedure offers a better representation of the current accident situation and, in particular, the barrier concept is a better reflection of front-end stiffness seen in today- passenger car fleet compared to that of the current legislative barrier face. Based on the preliminary performance corridors of the prototype AE-MDB, a refined AE-MDB specification has been developed. A programme of barrier to load cell wall testing was undertaken to complete and standardise the AE-MDB specification. Barrier faces were supplied by the four leading manufacturers to demonstrate that the specification could be met by all. This paper includes background, specification and proof of compliance.
Rear-end collisions are the most frequent same and opposite-direction crashes. Common causes include momentary inattention, inadequate speed or inadequate distance. While most rear-end collisions in urban traffic only result in vehicle damage or slight injuries, rear-end collisions outside built-up areas or on motorways usually cause fatal or serious injuries. Driver assistance systems that detect dangerous situations in the longitudinal vehicle direction are therefore an essential safety plus. In view of this, for ADAC, systems that alert drivers to dangerous situations and initiate autonomous braking complement ESC as one of the most important active safety features in modern vehicles. The aim of ADAC is to provide consumers with technical advice and competent information about the systems available on the market. Reliable comparative tests that are based on standardised test criteria may provide motorists with important information and help them make a buying decision. In addition, they raise consumer awareness of the systems and speed up their market penetration. The assessment must focus on as many aspects of effectiveness as possible and include not only autonomous braking but also collision warning and autonomous brake assist. The work of the ADAC accident research is the development of the testing scenarios with direct link to accident situations and the identification of useful test criteria for testing.
Impact severity is a fundamental measure for all in-depth crash investigation projects. One methodology used in the UK is based on the US Calspan software package CRASH3. The UK- in-depth crash investigation studies routinely use AiDamage3 a software package which is based on an updated version of the original CRASH3 algorithm, including enhancements to the vehicle stiffness coefficients. Real world accident-damaged vehicles are measured and their crush is correlated with a library of stiffness coefficients. These measurements are then used, along with other parameters, to calculate the crash energy and equivalent changes of velocity of the vehicles (delta-v), which is a measure of the impact severity. UK in-depth accident studies routinely validate the crash severity methodologies applied as the vehicle fleet changes. This is achieved by analysing crash test data and using the appropriate residual crush damage and other inputs to AiDamage3 and checking the program- outputs with the known crash severity parameters. This procedure checks, at least in part, the default stiffness values in the data libraries and the reconstruction methods used.
Testverfahren zur Bewertung und Verbesserung von Kinderschutzsystemen beim Pkw-Seitenaufprall
(2003)
Die gegenwärtige europäische Regelung zur Prüfung und Zulassung von Kinderschutzsystemen (KSS) für Pkw (ECE-R44-03) beinhaltet dynamische Tests zur Frontal- und Heckaufprallsimulation. Der Seitenaufprall ist bisher nicht berücksichtigt, obwohl die Verletzungsschwere und die Folgekosten groß sind. Im Gegensatz zum Frontal- und Heckaufprall ist der Seitenaufprall gekennzeichnet durch eine direkte Lasteinleitung durch intrudierende Strukturen. Das Kinderschutzsystem und das Kind werden durch große Kontaktkräfte direkt beaufschlagt. Verletzungen des Kopfes und Halsbereichs von Kindern in KSS sind hierbei häufig und schwer. Seit 1993 beschäftigt sich daher eine ISO-Arbeitsgruppe (International Standardization Organisation) mit der Entwicklung eines Testverfahrens zur Prüfung von KSS beim Seitenaufprall. Die Ziele und entsprechende Ideen sowie Konzepte beteiligter Parteien sind bis heute kontrovers, so dass bisher keine endgültige Einigung im Rahmen der Arbeitsgruppe erzielt werden konnte. Ziel der vorliegenden Arbeit als Abschluss eines Projekts der BASt (Bundesanstalt für Straßenwesen) und dem Fachgebiet Kraftfahrzeuge der TU Berlin ist es, die komplexe Problematik zu dem Thema umfassend darzustellen und gleichzeitig einen ganzheitlichen Lösungsvorschlag anzubieten. Hierzu sind die Teilergebnisse der ISO-Arbeitsgruppe im ersten Schritt strukturiert und analysiert worden. Wissenslücken wurden detektiert und in einem weiteren Schritt beseitigt. Alle Teilergebnisse wurden im Rahmen der ISO-Arbeitsgruppe präsentiert, diskutiert und größtenteils auch akzeptiert. Der aktuelle Stand der ISO-WG1 ist somit maßgeblich von den hier erzielten Ergebnissen beeinflusst. Als Kern der vorliegenden Arbeit ist an der TU Berlin das Konzept für ein Testverfahren entwickelt, umgesetzt und geprüft worden. Die wesentlichen Parameter des realen Seitenaufpralls wie: - Beschleunigungsniveau des gestoßenen Pkw, - Delta-v des gestoßenen Pkw, - Maximalintrusion beim gestoßenen Pkw sowie - die maximale Intrusionsgeschwindigkeit im Kopfbereich sind wiedergegeben. In Abgrenzung zu aktuellen, komplexen Schlittentestverfahren, die z.B. zur Entwicklung von Seitenairbags dienen, ist die statische und dynamische Intrusionsgestalt einer realen Pkw-Seitenstruktur hingegen stark vereinfacht, aber ausreichend dargestellt. Die Ergebnisse zeigen, dass es prinzipiell möglich ist, das Schutzpotential von rückwärtsgerichteten sowie vorwärtsgerichteten KSS mit dieser Prozedur zu analysieren. Die Seitenaufprallabbildungsgüte ist hoch bei einer gleichzeitig sehr guten Reproduzierbarkeit der Messergebnisse. So zeigen die Tests, dass die Kinematik des Kopf- und Halsbereichs im Wesentlichen von der Gestalt des KSS im Seitenbereich abhängig ist. Ausreichend große Seitenwangen können den Kopf flächig stützen und vermeiden so den direkten Kontakt zu intrudierenden Strukturen. Gleichzeitig wird die starke laterale Inklination der Halswirbelsäule reduziert. Die Belastungen am Kopf sind aber bei allen getesteten KSS hoch und liegen deutlich oberhalb diskutierter Grenzwerte. Bei genauer Betrachtung der KSS-Seitenwangenpolsterung fällt auf, dass diese entweder gar nicht oder nur rudimentär vorhanden ist. Modifikationen, die abschließend an KSS vorgenommen wurden, zeigen aber auf, dass bereits durch einfache technische Maßnahmen die Belastungen im Kopfbereich signifikant gesenkt werden können. Das mit dieser Arbeit vorgelegte Testverfahren bietet KSS-Herstellern wie auch dem Gesetzgeber die Möglichkeit, Schwächen von KSS aufzudecken und Modifikationen zielgerichtet durchzuführen. Durch die Berücksichtigung des realen Seitenaufpralls ist gewährleistet, dass alle Optimierungen seitens der KSS-Hersteller auch positiven Einfluss auf die passive Sicherheit von Kindern in Pkw haben können. Eine maximale Reduktion der schwer bzw. tödlich verletzten Kinder als Pkw-Insassen in Höhe von ca. 10% ist bei 100%-iger Marktdurchdringung mit optimal gestalteten Produkten realistisch. Dies entspricht einer Verringerung der Anzahl getöteter Kinder um ca. 10 sowie schwerverletzter Kinder um ca. 200 pro Jahr in Deutschland.
Side-impact safety of passenger cars is assessed in Europe in a full-scale test using a moving barrier. The front of this barrier is deformable and represents the stiffness of an 'average' car. The EU Directive 96/27/EC on side impact protection has adopted the EEVC Side Impact Test Procedure, including the original performance specification for the barrier face when impacting a flat dynamometric rigid wall. The requirements of the deformable barrier face, as laid down in the Directive, are related to geometrical characteristics, deformation characteristics and energy dissipation figures. Due to these limited requirements, many variations are possible in designing a deformable barrier face. As a result, several barrier face designs are in the market. However, research institutes and car manufacturers report significant difference in test results when using these different devices. It appears that the present approval test is not able to distinguish between the different designs that may perform differently when they impact real vehicles. Therefore, EEVC Working Group 13 has developed a number of tests to evaluate the different designs. In these tests the barrier faces are loaded and deformed in a specific and/or more representative way. Barrier faces of different design have been evaluated. In the paper the set-up and the reasoning behind the tests is presented. Results showing specific differences in performance are demonstrated.
The term test procedure refers to a method that describes how a system has to be tested to identify and assess specific behavior or properties by experiments. This also includes the specification of required tools, equipment, boundary conditions, and evaluation methods. Test procedures are an essential tool to check whether desired product properties are present, which of course also applies to the development of driver assistance systems. In addition to development and release testing that mainly is performed by the vehicle or system manufacturer, there are tests with the purpose of an independent product testing that are conducted by external test organizations. These tests are needed for vehicle type approval (for admission to a specific market), in the context of applying the standard for functional safety (in both cases mainly executed by technical services (being accredited as certification laboratory)) or for customer information purposes (by a test institute for consumer protection). The focus of this chapter is these "external" test methods. After a taxonomy of test procedures, the differences between legislation (type approval) and consumer testing are highlighted. Typical tests and the associated test setup, tools, and assessment criteria are discussed, and an outlook toward testing in the near and mid-future is given.
Diese Studie befasst sich mit CO2-Reduktionspotenzialen von schweren Nutzfahrzeugen. In einer Literaturrecherche wurden zunächst Sattelzüge, Verteiler-Lkw, Busse im Stadtverkehr sowie Reisebusse betrachtet. Ziel war es, technische Möglichkeiten zur Reduzierung von CO2-Emissionen für die ausgewählten Fahrzeugkategorien zu ermitteln und deren Einsparpotentiale über die jeweiligen Einsatzarten aufzuschlüsseln. Dabei zeigten sich weitestgehend ungenutzte Einsparmöglichkeiten, beispielsweise durch Fahrwiderstandsoptimierung bei Sattelzügen, durch Rekuperation von Bremsenergie bei Stadtbussen und Verteiler-Lkw, oder auch durch bedarfsgerechte Ansteuerung von Nebenverbrauchern bei Stadt- und Reisebussen. Nähere Betrachtung fanden Maßnahmen zur CO2- Reduktion bei Sattelzügen. So wurde an einem Euro-V-EEV-Sattelzugprototyp in Fahrwiderstandsmessungen die Verbesserung des Luftwiderstands durch aerodynamische Anbauteile für Auflieger quantifiziert. Deren Verbrauchseinsparpotenziale wurden anschließend in validierten Verbrauchssimulationen, welche einen etablierten Verbrauchstest (VerkehrsRundschau-Test) virtuell abbilden, quantifiziert. Ferner zeigte eine Kosten-Nutzen-Rechnung die Effektivität der untersuchten Maßnahmen auf. Der Prototyp wurde anschließend dem realen VerkehrsRundschau-Test einmal in Ausgangskonfiguration und einmal mit einem zuvor bereits im Rahmen der Fahrwiderstandsmessungen untersuchten aerodynamischen Maßnahmenpaket, bestehend aus Seitenverkleidung und Heckeinzugsklappen, unterzogen. Hierbei zeigte sich eine mögliche CO2-Reduktion von 4,8 %. Die gemessene Einsparung lag damit oberhalb der zuvor im Rahmen der Verbrauchssimulation prognostizierten.
Unfälle im Straßenverkehr sind in aller Regel Konsequenzen normalen Fahrverhaltens, das an eine bestimmte Situation nicht angepasst war und daher zum Unfall beigetragen hat. Zur Klassifikation dieses mutmaßlich fehlerbehafteten Verhaltens wurde im hier berichteten Projekt eine Taxonomie entwickelt. Sie dient der Klassifizierung von Fahrerfehlverhalten und integriert Aspekte des menschlichen Informationsverarbeitungsprozesses sowie die drei Fehlertypen von RASMUSSEN (1983). Als Bestimmungsstücke beinhaltet die Taxonomie Fehlertypen (regel-/wissens-/fertigkeitsbasiert) und Entscheidungsknoten mit Fragen, deren Beantwortung den Analysten zum jeweiligen Fehler führt. Zusammengefasst bietet die erarbeitete Taxonomie eine breite Anwendbarkeit für die Klassifikation von Fahrfehlern und fehlerfreiem Verhalten bei Manövern, kritischen Situationen bis hin zu Beinaheunfällen oder Unfällen, z. B. zur Harmonisierung der (Video-)Auswertung von FOT- und NDS-Datensätzen oder für In-Depth-Unfallerhebungen. Die Taxonomie wird komplementiert durch eine Übersicht über Fehlervorläuferbedingungen, die im Sinne von Genotypen (HOLLNAGEL 1998) in ihrer jeweiligen Ausprägung auslösende und begünstigende Bedingungen für Fehler, Beinaheunfälle und Unfälle darstellen. Die Übersicht ist als erweiterbares strukturierendes Dokument zu sehen, welches je nach wissenschaftlichen Erkenntnissen verändert werden kann. Gemeinsam mit der Taxonomie bildet sie die Basis für die Ableitung von Fahrerassistenzbedarf und andere Maßnahmen, zur Generierung von Hypothesen und zur strukturierten Sammlung von Studienergebnissen. Der vorliegende Bericht adressiert die FOT- und NDS-Community sowie allgemein verkehrspsychologisch-wissenschaftlich Interessierte. In acht Kapiteln widmet er sich den Arbeitsschritten und Ergebnissen der Taxonomieentwicklung.
Although the bus belongs to the safest traffic means, single accidents can be particularly severe and concern many passengers. Especially in case of fires a high number of injured and killed persons can be the outcome. Fire safety of buses therefore is of high importance. With the increase of plastic materials as a material for the interior equipment of buses and coaches due to their good mechanical properties combined with low weight, the question arises whether the safety level has decreased in case of a fire during the last years " also compared to other means of transport. Because of the combustible plastics and their ability to release a high amount of heat the main fire load in buses is no longer the fuel but the plastic materials which are also often easy to ignite. Besides the flammability of the equipments, also the production of smoke, the smoke development and propagation as well as its toxicity are of interest. That counts for the passengers as well as for the test methods and its limit values. The severe fire in Germany near Hanover in 2008 with 20 fatalities showed how disastrous such fires can be. For those reasons several research projects were initiated on behalf of the German Federal Highway Research Institute. At the one hand the fire behaviour of coach interiors was examined in general focusing on fire propagation as well as fire detection and signalling. As result, recommendations with regard to early fire detection systems for the engine compartments and onboard extinguishing equipment were elaborated. On the other hand research was carried out to examine heat release, smoke, smoke propagation and its toxicity due to burning bus interior materials. In this project small and real scale experiments on material specimens, interior parts and vehicles were performed. Trains and buses often have very similar operation conditions. Consequently, bus interior material was tested according to the regulations for rail vehicles, i.e. DIN EN 45545 as well as DIN 5510. None of the tested bus interior materials would have been allowed to use in a train. The fire safety regulations for bus materials are on a low level compared to other transport sectors, i.e. railway, ship and aircraft. Also numerical investigations with the Fire Dynamics Simulator (FDS) were performed. The very rapid fire development during the severe bus fire from 2008 could be predicted with the numerical model. The model was then used to investigate the influence of different materials, ventilation conditions and ignition sources. The bus materials contribute significantly to a very rapid fire development in bus fires. Especially, the flammable ceiling and the passenger seats were identified to be key issues of the fire propagation in a bus and can be explained by the rapid fire spread along the ceiling and the high fire load of passenger seats. As conclusion of the project effective and economically reasonable fire safety requirements for interiors of buses are recommended which would improve the current situation. Proposals for amendments of current requirements are recommended including the specification of appropriate limit values. In particular, it is taken into consideration which reasonable fire safety standards from other transport sectors, especially the rail sector, should be transferred to buses
The aim of this study was to evaluate the performance and accuracy of Event Data Recorders (EDRs). The analysis was based on J-NCAP crash tests from 2006"2007, with the corresponding EDR datasets. The pre-crash velocity, maximum delta-V and delta-V versus time history data recorded in the EDRs were compared with the reliable crash test data. The difference between the EDR pre-crash velocity and the laboratory test speed was less than 4 percent. In contrast, in several cases the maximum delta-V and delta-V versus time history data obtained from the EDRs showed uncertainty of measurement in comparisons with the reliable delta-V data. The difference in maximum delta-V in these comparisons was more than 5 percent in 10 of 14 tests and more than 10 percent in 4 of 14 tests. The EDRs underestimated the maximum delta-V in almost all tests. It was also concluded that the calculated acceleration from the EDR delta-V versus time history data showed good agreement with the instrumented accelerometer signal during the collision in almost all tests.
The sequence of accident events can be classified by three essential phases, the pre-crash-sequence, the crash-sequence and the post-crash-sequence. The level of reliability of the information in the GIDAS-database (German In Depth Accident Study) is provided predominantly on the passive side. The period to evaluate active safety systems begins already in the pre-crash-sequence. The assessment of the potential of sensor- or communication-based active safety systems can only be accomplished by a detailed analysis of the pre-crash-phase. Hence the necessity to analyze the early period of the accident event in detail arises. This is possible with the help of the digital sketches of the accident site and the simulation of the accident by a simulation method of the VUFO GmbH. After simulating the pre-crash scenario it is possible to generate additional and standardized data to describe the pre-crash-sequences of an accident in a very high detail. These data are documented in a second database called the GIDAS Pre-Crash-Matrix (PCM). The PCM contains various tables with all relevant data to reproduce the pre-crash-sequence of traffic accidents from the GIDAS database until 5 seconds before the first collision. This includes parameters to describe the environment data, participant data and motion or dynamic data. This paper explains the creation of the PCM, the simulation itself and the contents and structure of the PCM. With this information of the pre-crash-sequence for various accident scenarios an improved benefit estimation and development of active safety systems can be made possible.
The focus of the technical innovation in the automobile industry is currently changing to sensor based safety systems, which are operating in the pre-crash phase of an accident. To get more information about this pre-crash phase for real accidents a simulation of this phase using the GIDAS database is done. The basics for this simulation are geometrical information about the accident location and the exact accident data out of the GIDAS database. This aggregated information gives the possibility to simulate an exact motion for every accident participant, using MATLAB / SIMULINK, in the pre-crash phase. After the simulation the information about the geometrical positions, the velocities and maneuvers of the drivers to an individual TTC (time to collision) are available. With those results it is possible to develop new useful sensor geometries using pre-crash scatter plots or estimate the efficiency of implemented active safety systems in combination with sensor characteristics. This simulation can be done for every reconstructed accident included in the GIDAS database, so these results can represent a wide spread basis for the further development of active safety systems and sensor geometries and characteristics
Sicherheitstechnische Anforderungen an die Bestuhlung moderner Reisebusse als Rückhaltesysteme
(1991)
Die Schutzfähigkeit von KOM-Fahrgastsitzen, die den ECE-R 80-Anforderungen entsprechen, ist bisher nur für die aufgerichtete Rückenlehne nachgewiesen. Hier wurde untersucht, ob auch geneigte Rückenlehnen ausreichende Schutzwirkung bieten. Ausgehend von der Normalsitzposition verfügen Reisebussitze heutiger Bauart über einen Lehnenverstellwinkel von circa 15 Grad (Normal-, Ruhesitzposition). Sondersitze für Ältere und Sportler erlauben auch die Liegesitz- beziehungsweise Liegeposition bei jedoch erheblich größeren Sitzteilern. In Schlittenaufprallversuchen mit je zwei instrumentierten anthropometrischen Messpuppen auf Reisebus-Doppelsitzen wurden die Belastungsverhältnisse eines frontalen Aufpralls simuliert. Die Lehnenverstelleinrichtung der Prüfsitze wurde behelfsweise so verändert, dass 3 (4) Winkeleinstellungen der Lehnenneigung möglich waren. Für jeweils zwei hintereinander zugeordnete Sitzplätze wurden wechselweise diese Lehneneinstellungen variiert. Mit 17 Doppelsitzen wurden insgesamt 32 Körperaufprallereignisse in den verschiedenen Lehnenneigungskonfigurationen durchgeführt. Die Versuchsergebnisse gliederten sich nach der Bewegungsform des Dummy, seinen Belastungen und den am Vordersitz hervorgerufenen Beschädigungen. Die Aufprallverhältnisse in aufrechter Normalsitzposition entsprechend der ECE-R 80 bildeten die Bewertungsbasis. Die gewonnenen Versuchsergebnisse lassen sich wie folgt zusammenfassen: - Für beliebige Lehneneinstellungen im Winkelbereich bis zu 30 Grad zur Senkrechten bietet die vorgebaute Sitzlehne generell ausreichende Rückhaltewirkung beim Körperaufprall. - Wenn die Vordersitzlehne jedoch steiler eingestellt ist als es der Körperhaltung des dahintersitzenden Dummy entspricht, ist mit 1,5-2fach höheren Kopfbelastungen zu rechnen. Das ECE-R 80-Schutzkriterium HAC < 500 wird überschritten. - Vorsorglich sollte aus sicherheitstechnischer Sicht der zulässige Grenzwinkel der Lehnenneigung auf 30 Grad zur Senkrechten beschränkt werden.
Gegenstand der Studie ist die Sicherheitsbeurteilung kleiner Stadt-Pkw. Durch die Auswertung von Herstellerunterlagen zur konstruktiven Gestaltung, von Veröffentlichungen zum Kollisionsverhalten und zur Betriebssicherheit, in Kontakten mit einem Importeur solcher Fahrzeuge und durch eigene Begutachtung mehrerer Modelle wurde der technische Stand gegenwärtig angebotener Fahrzeuge erfasst. Die rechtliche Situation der Fahrzeuge in der Bundesrepublik Deutschland, Frankreich, Italien und Japan wurde zusammengestellt. Die gesetzlichen Anforderungen dieser Staaten an diesen Fahrzeugen unterscheiden sich deutlich. Europäische Fahrzeuge berücksichtigen nur in geringem Maß Belange der passiven Sicherheit, da die Fahrzeuge in ihren Herstellungsländern Vorschriften zum Aufprallverhalten und zum Insassenschutz nicht erfüllen müssen. Japanische Fahrzeuge sind in ihren Eigenschaften herkömmlichen Fahrzeugen ähnlich. Wichtige Anforderungen an die innere und äussere passive Sicherheit dieser Stadt-Pkw werden zusammengestellt.
Die Elektromobilität ist nicht erst seit dem Nationalen Entwicklungsplan Elektromobilität der Bundesregierung, der u.a. als Zielsetzung hat, dass eine Million Elektrofahrzeuge bis 2020 auf deutschen Straßen fahren sollen, ein allgegenwärtiges Thema. Eine zu lösende Aufgabe auf dem Weg zu diesem Ziel ist die Betrachtung der Abhängigkeiten der Systeme Elektrofahrzeug, Ladeverbindungseinheit und Ladesystem, welche bisher weitgehend autonom normiert sind. Um Personen- und Sachschäden beim Laden von Fahrzeugen zu vermeiden, ist es möglicherweise erforderlich, Anforderungen an die Sicherheit dieses Gesamtsystems zu definieren. Zu diesem Zweck beauftragte die Bundesanstalt für Straßenwesen die SGS-TÜV Saar GmbH, Competence Center Funktionale Sicherheit mit der Durchführung einer Risikoanalyse, mit dem Ziel die Sicherheitsaspekte beim Laden eines Elektrofahrzeuges zu untersuchen. Bisher nicht bzw. unzureichend betrachtete Gefährdungen während des Ladevorganges sollten aufgezeigt werden. Nötige Maßnahmen sollten definiert und punktuell mittels Tests validiert werden, um identifizierte Risiken auf ein ausreichend geringes Maß zu senken. Im Kern wurde untersucht, welche potenziellen Risiken (Das Risiko definiert sich als die Beschreibung eines Ereignisses mit der Möglichkeit negativer Auswirkungen. Das Risiko wird allgemein als Produkt aus Eintrittswahrscheinlichkeit eines Ereignisses und dessen Konsequenz angesehen. (Quelle: Wikipedia)) beim Laden eines Elektrofahrzeugs auftreten. Auf Basis einer Normenrecherche wurde die Frage beantwortet, an welchen Stellen normativer und gesetzlicher Handlungsbedarf besteht. Dazu wurden die nachfolgenden Schwerpunkte erarbeitet: - Darstellung möglicher sicherheitskritischer Bedingungen beim Laden; - Zuordnung der sicherheitskritischen Bedingungen zu den Subsystemen Infrastruktur, Kabel und Fahrzeug; - Definition von Maßnahmen zur Erhöhung der Sicherheit beim Laden; - Aufzeigen der Zuständigkeiten für die Gewährleistung der Sicherheit; - Offenlegung des regelungsseitigen Bedarfs. Im ersten Schritt wurde eine Risikoanalyse durchgeführt, um die potenziellen Risiken beim Laden eines Elektrofahrzeugs aufzuzeigen. Die Risikoanalyse wurde zunächst ohne Berücksichtigung bereits normativ oder gesetzlich festgelegter Schutzmaßnahmen durchgeführt. Anschließend erfolgte eine iterative Weiterführung der Betrachtung der Risiken in zweierlei Hinsicht: a) Berücksichtigung existierender normativer und/ oder gesetzlicher Anforderungen, welche parallel zur Risikoanalyse recherchiert wurden; b) Beschreibung ergänzender technischer und/ oder organisatorischer Maßnahmen, um nicht abgedeckte Risiken weiter zu reduzieren. Danach wurde eine erneute Beurteilung der Risiken vorgenommen, um aufzuzeigen, ob die vorhandenen bzw. neu definierten Maßnahmen in der Lage sind, das identifizierte Risiko in ausreichendem Maß zu reduzieren. Generell zeigte sich im Rahmen der Risikoanalyse eine breite, durch Normen und Richtlinien bzw. gesetzlichen Regelungen, vorhandene Abdeckung der möglichen Risiken. Derzeit nicht abgedeckte Risiken konnten adressiert und wirksame Lösungsmöglichkeiten vorgeschlagen werden. Bei Umsetzung aller aufgezeigten Lösungsansätze bleiben somit keine relevanten Risiken offen. Jedoch zeigt sich auch, dass zu bestimmten Themen dringender Handlungsbedarf besteht. Als Ergebnis ließ sich zu folgenden Punkten ein konkreter Handlungsbedarf ableiten: - Als eines der Hauptrisiken wurde das Laden an einer haushaltsüblichen Schukosteckdose, ohne die Nutzung einer zusätzlichen in der Ladeleitung integrierten Schutzeinrichtung, identifiziert. Bei Ladeleitungen mit Schutzeinrichtung hängt deren Schutzwirkung nicht zuletzt von einer regelmäßigen technischen Überprüfung ab; - Als relevant wurden weiterhin die elektromagnetischen Felder, die von einer Ladeleitung bei hohen Strömen ausgehen (zukünftige Schnellladesysteme), identifiziert, hier sind tiefergehende Untersuchungen erforderlich; Im Sinne der Risikominimierung sollte auch das maximal zulässige Gewicht der Ladegarnitur limitiert sein; - Auch Risiken, die sich durch die Bedienung ergeben, wurden untersucht. Mit entsprechenden Hinweisen im Bedienungshandbuch des Elektrofahrzeuges kann hier bereits einigen möglichen Gefahren begegnet werden. Dies betrifft unter anderem die Handhabung der Ladegarnitur beim Laden im öffentlichen Raum. Aus den ermittelten, noch umzusetzenden Maßnahmen geht hervor, dass der derzeitige Stand der Normung und gesetzlichen Regelungen noch nicht vollkommen ausreichend ist, um alle ermittelten und aufgezeigten Risiken in ausreichendem Maße zu reduzieren. Aus den Ergebnissen der Studie wird aber auch deutlich, dass die Sicherheit nicht alleine von einem Teilsystem alleine, sondern vielmehr durch das sichere Zusammenwirken aller Teile, auch in Kombination mit dem Verhalten der Nutzer und partizipierender Personen, gewährleistet wird.