91 Fahrzeugkonstruktion
Filtern
Dokumenttyp
- Konferenzveröffentlichung (12)
- Buch (Monographie) (4)
- Arbeitspapier (1)
Schlagworte
- Statistics (17) (entfernen)
Institut
The presence and performance of Advanced Driver Assistance Systems (ADAS) has increased over last years. Systems available on the market address also conflicts with vulnerable road users (VRUs) such as pedestrians and cyclists. Within the European project PROSPECT (Horizon2020, funded by the EC) improved VRU ADAS systems are developed and tested. However, before determining systems" properties and starting testing, an up-to-date analysis of VRU crashes was needed in order to derive the most important Use Cases (detailed crash descriptions) the systems should address. Besides the identified Accident Scenarios (basic crash descriptions), this paper describes in short the method of deriving the Use Cases for car-to-cyclist crashes. Method Crashes involving one passenger car and one cyclist were investigated in several European crash databases looking for all injury severity levels (slight, severe and fatal). These data sources included European statistics from CARE, data on national level from Germany, Sweden and Hungary as well as detailed accident information from these three countries using GIDAS, the Volvo Cars Cyclist Accident database and Hungarian in-depth accident data, respectively. The most frequent accident scenarios were studied and Use Cases were derived considering the key aspects of these crash situations (e.g., view orientation of the cyclist and the car driver- manoeuvre intention) and thus, form an appropriate basis for the development of Test Scenarios. Results Latest information on car-to-cyclist crashes in Europe was compiled including details on the related crash configurations, driving directions, outcome in terms of injury severity, accident location, other environmental aspects and driver responsibilities. The majority of car-to-cyclist crashes occurred during daylight and in clear weather conditions. Car-to-cyclist crashes in which the vehicle was traveling straight and the cyclist is moving in line with the traffic were found to result in the greatest number of fatalities. Considering also slightly and seriously injured cyclists led to a different order of crash patterns according to the three considered European countries. Finally the paper introduced the Use Cases derived from the crash data analysis. A total of 29 Use Cases were derived considering the group of seriously or fatally injured cyclists and 35 Use Cases were derived considering the group of slightly, seriously or fatally injured cyclists. The highest ranked Use Case describes the collision between a car turning to the nearside and a cyclist riding on a bicycle lane against the usual driving direction. A unified European dataset on car-to-cyclist crash scenarios is not available as the data available in CARE is limited, hence national datasets had to be used for the study and further work will be required to extrapolate the results to a European level. Due to the large number of Use Cases, the paper shows only highest ranked ones.
Die vorliegende Studie liefert Ergebnisse zur Marktdurchdringung von Fahrzeugsicherheitssystemen im Jahr 2015. Wie bereits im Jahr 2013 wurde die Studie von infas und dem Institut fuer Kraftfahrzeuge (ika) durchgeführt. Dazu wurden 5.040 Haushalte zur Ausstattung eines ihnen zur Verfügung stehenden Fahrzeugs befragt und 56 Fahrzeugsicherheitssysteme ausgewählt. Neben den quantitativen Interviews wurden zwei Fokusgruppen mit Neu- bzw. Gebrauchtwagenkäufern durchgeführt. In der vorangegangenen Studie von 2013 wurden Experten befragt, die beruflich mit dem Ein- oder Verkauf von Pkw fuer Unternehmensflotten befasst sind. Die weiteste Verbreitung haben passive Sicherheitssysteme wie Airbags, die darauf abzielen, die Folgen eines Unfalls fuer die Beteiligten abzumildern. Aber auch aktive und intervenierende Systeme, die Risiken vermeiden oder einzelne Fahraufgaben übernehmen, gehören haeufig zur Fahrzeugausstattung. Die häufigsten Vertreter aus dieser Gruppe sind der Bremsassistent, ESP und der Tempomat. Die meisten Fahrzeugsicherheitssysteme sind in Fahrzeugen der oberen Mittelklasse und Oberklasse zu finden. Mit der jährlichen Fahrleistung und der Nutzungshäufigkeit nimmt die Anzahl der Systeme ebenso zu wie bei jüngeren Fahrzeugen und Dienstwagen. Die grössten Veränderungen gibt es im Segment der SUVs und Geländewagen. Hier steigt die Zahl der Neuzulassungen in den letzten Jahren deutlich und die Ergebnisse zeigen, dass diese Fahrzeuge häufig mit einer Vielzahl von Sicherheitssystemen ausgestattet sind. Die Ergebnisse aus der Vorgängerstudie zeigen, dass gewerbliche Fahrzeughalter solche Fahrzeugsicherheitssysteme in die Standardausstattung aufnehmen, deren Nutzen nachgewiesen ist. In der diesjährigen Studie wird deutlich, dass auch private Käufer Systeme insbesondere dann als sicherheitsrelevant und sinnvoll erachten, wenn sie durch den Gesetzgeber vorgeschrieben oder bereits seit längerer Zeit auf dem Markt etabliert sind. Es zeigt sich auch, dass insbesondere die eigene Erfahrung mit Sicherheitssystemen Vorurteile abbaut und zu einer positiven Einstellung gegenüber solchen Systemen führt.
Aufgabe der Studie war eine erstmalige umfassende Erhebung der Ausstattung der Pkw in Deutschland mit Fahrzeugsicherheitssystemen. Dazu wurden 5.070 Haushalte zur Ausstattung eines ihnen zur Verfügung stehenden Fahrzeugs befragt. Für die Befragung wurden 53 Fahrzeugsicherheitssysteme ausgewählt. Darunter sind neue Systeme wie Stauassistenten und Kreuzungsassistenten sowie auch weitgehend etablierte Systeme wie die Fahrdynamikregelung (ESP) und Airbags. Neben den Nutzern wurden auch Experten befragt, die beruflich mit dem Ein- oder Verkauf von Pkw für Unternehmensflotten befasst sind. Diese zehn qualitativen Interviews geben einen Einblick in die Bedeutung verschiedener Kriterien bei der Fahrzeugwahl und speziell den Stellenwert von Fahrzeugsicherheitssystemen. Die weiteste Verbreitung haben passive Sicherheitssysteme wie Airbags, die darauf abzielen, die Folgen eines Unfalls für die Beteiligten abzumildern. Aber auch aktive und intervenierende Systeme, die Risiken vermeiden oder einzelne Fahraufgaben übernehmen, gehören häufig zur Fahrzeugausstattung. Die häufigsten Vertreter aus dieser Gruppe sind der Bremsassistent, ESP und der Tempomat. Die meisten Fahrzeugsicherheitssysteme sind in Fahrzeugen der oberen Mittelklasse und Oberklasse zu finden. Mit der jährlichen Fahrleistung und der Nutzungshäufigkeit nimmt die Anzahl der Sicherheitssysteme ebenso zu wie bei jüngeren Fahrzeugen und Dienstwagen. Die Ergebnisse zeigen ein Muster: Sind Systeme insgesamt selten, unterscheiden sich die Anteile innerhalb der verschiedenen Fahrzeugsegmente teilweise erheblich. Neue Systeme sind dann in den Fahrzeugen der oberen Mittelklasse und Oberklasse deutlich häufiger zu finden und in den Minis und Kleinwagen teilweise mit nicht messbaren Anteilen. Die Experteninterviews, die mit Flottenbetreibern und Fahrzeugverkäufern geführt wurden, zeigen, dass solche Fahrzeugsicherheitssysteme in die Standardausstattung aufgenommen werden, deren Nutzen nachgewiesen ist.
Seit Anfang der 70er Jahre kann im Bereich der passiven Sicherheit eine stetige Verbesserung durch die Abnahme der im Verkehr verletzten und getöteten Personen beobachtet werden. Weitere fahrzeugtechnische Optimierungen zur Verbesserung von Selbst- und Partnerschutz, unterstützt und forciert durch flankierende legislative Maßnahmen, sind durchzuführen, wobei parallel die Effizienz bereits getroffener Maßnahmen zu prüfen ist. In der Pilotstudie wird der Versuch gemacht, ausgehend von bekannten Erkenntnissen der Unfallanalyse, das Gesamtunfallgeschehen Pkw zu realitätsbezogenen, in ihren Wirkungsmechanismen gleichartigen Unfallkonstellationen zusammenzufassen. Die Reduzierung auf wenige Kollisionstypen schafft die Möglichkeit zur Erarbeitung von Testbedingungen. Die im Test nachzufahrenden Unfallkonstellationen und die statisch/dynamische Untersuchung einzelner Fahrzeugkomponenten dokumentieren sich in physikalischen Messwerten und fahrzeugbezogenen Größen. Ein Bewertungssystem addiert die Messwerte auf und versieht sie mit relevanzproportionalen Wichtungsfaktoren zu einem Sicherheitsgrad. Praktische Bedeutung hat das Projekt zum Beispiel für die quantitative Ermittlung des Sicherheitsfortschrittes innerhalb eines Zeitraumes von 10 bis 15 Jahren, der Untersuchung von Sicherheitskomponenten und der Effizienzüberprüfung legislativer Sicherheitsverordnungen etc.
The evaluation of the expected benefit of active safety systems or even ideas of future systems is challenging because this has to be done prospectively. Beside acceptance, the predicted real-world benefit of active safety systems is one of the most important and interesting measures. Therefore, appropriate methods should be used that meet the requirements concerning representativeness, robustness and accuracy. The paper presents the development of a methodology for the assessment of current and future vehicle safety systems. The variety of systems requires several tools and methods and thus, a common tool box was created. This toolbox consists of different levels, regarding different aspects like data sources, scenarios, representativeness, measures like pre-crash-simulations, automated crash computation, single-case-analyses or driving simulator studies. Finally, the benefit of the system(s) is calculated, e.g. by using injury risk functions; giving the number of avoided/mitigated accidents, the reduction of injured or killed persons or the decrease of economic costs.
The paper gives an overview of the recent (mostly 2012) figures of killed bus/coach occupants (drivers and passengers) in 27 Member States of the European Union as reported by CARE. The Evolution of the figures of bus/coach occupants killed in road accidents urban, rural without motorway and on motorways from 1991 to 2010 in 15 Member States of the EU supplements this information. More detailed are the figures reported for Germany by the Federal Statistics. The paper displays long-term evaluations (1957 to 2012) for killed, seriously and slightly injured occupants in all kinds of buses/coaches. Midterm evaluations (1995 to 2012) of the figures of fatalities and casualties are displayed for different busses according to their identification of road using as coaches, urban buses, school buses, trolley buses and "other buses". To be able to compare the evolutions of the safety of vehicle occupants it is customary to use different risk indicators. Calculations and illustrations for three often used indicators with their development over time are given: fatalities, seriously injured and slightly injured per 100,000 vehicles registered, per 1 billion (109) vehicle-kilometres travelled and per 1 billion (109) person-kilometres. These indicators are shown for occupants of cars, goods vehicles and buses/coaches. For the period from 1957 until 2012 it is obvious, that for all three vehicle categories analysed there was a clear long-term trend towards more occupant safety in terms of casualties per vehicles registered and per vehicle mileage. This was most significant for car occupants but it can be seen for bus/coach occupants and goodsvehicle occupants as well. Figures of killed occupants and of casualties related to person-kilometres are calculated and displayed for the shorter period 1995 to 2012. Here it becomes obvious that the bus/coach is still the safest mode of transport for the occupants of road vehicles. Graphs for the casualty risk indices still show significantly higher risks for car occupants despite the corresponding curve moved sustainable downwards. It is remarkable, that the risks of being killed or injured for the occupants of urban buses is growing whereas the corresponding risk for the occupants of coaches in line traffic tends downwards. The article ends with a short comparison and discussion of the risk indicators which are actually published for the occupants (driver and passengers) of cars and the passengers of buses/coaches, railroads, trams and airplanes. The interpretation of such information depends on the perception and it seems that for a complete view not only one indicator should be used and the evolutions of the indicator values during longer periods (as displayed with examples in the paper) should also be taken into account.
Recent accident statistics from the German national database state bicyclists being the second endangered group of vulnerable road users besides pedestrians. With 399 fatalities, more than 14.000 seriously injured and more than 61.000 slightly injured persons on german roads in the year 2011, the group of bicyclists is ranked second of all road user groups (Statistisches Bundesamt, 2012). While the overall bicycle helmet usage frequency in Germany is very low, evidence is given that its usage leads to a significant reduction of severe head injuries. After an estimation of the benefit of bicycle helmet usage as well as an appropriate test procedure for bicyclists, this paper describes two different approaches for the improvement of bicyclist safety. While the first one is focusing on the assessment of the vehicle based protection potential for bicyclists, the second one is concentrating on the safety assessment of bicycle helmets. Within the first part of the study the possible revision of the existing pedestrian testing protocols is being examined, using in depth accident data, full scale simulation and hardware testing. Within the second part of the study, the results of tests according to supplemental test procedures for the safety assessment of bicycle helmets developed by the German Federal Highway Research Institute (BASt) are presented. An additional full scale test performed at reduced impact speed proves that measures of active vehicle safety as e.g. braking before the collision event do not necessarily always lead to a reduction of injury severity.
The overall purpose of the ASSESS project is to develop a relevant and standardised set of test and assessment methods and associated tools for integrated vehicle safety systems, primarily focussing on currently available pre-crash sensing systems. The first stage of the project was to define casualty relevant accident scenarios so that the test scenarios will be developed based on accident scenarios which currently result in the greatest injury outcome, measured by a combination of casualty severity and casualty frequency. The first analysis stage was completed using data from a range of accident databases, including those which were nationally representative (STATS19, UK and STRADA, SE) and in-depth sources which provided more detailed parameters to characterise the accident scenarios (GIDAS, DE and OTS, UK). A common analysis method was developed in order to compare the data from these different sources, and while the data sets were not completely compatible, the majority of the data was aligned in such a way that allowed a useful comparison to be made. As the ASSESS project focuses on pre-crash sensing systems fitted to passenger cars, the data selected for the analysis was "injury accidents which involved at least one passenger car". The accident data analysis yielded the following ranked list of most relevant accident scenarios: Rank Accident scenario 1 Driving accident - single vehicle loss of control 2 Accidents in longitudinal traffic (same and opposite directions) 3 Accidents with turning vehicle(s) or crossing paths in junctions 4 Accidents involving pedestrians The ranked list highlights the relatively large role played by "accidents in longitudinal traffic", and "accidents with turning vehicle(s) or crossing paths in junctions" (the second and third most prevalent accident scenarios, respectively). The pre-crash systems addressed in ASSESS propose to yield beneficial safety outcomes with specific regard to these accident scenarios. This indicates that the ASSESS project is highly relevant to the current casualty crash problem. In the second stage of the analysis a selection of these accident scenarios were analysed further to define the accident parameters at a more detailed level .This paper describes the analysis approach and results from the first analysis stage.
This work aims at bringing evidence for mass incompatibility in frontal impact for cars built according to the UNECE R94 regulation. French national injury accidents database census for years 2005 to 2008 were used for the analysis. The heterogeneity of frontal self-protection among cars of different masses is investigated, as well as the partner protection parameter offered by these cars. The last part of the analysis deals with the estimation of the benefit, in terms of fatal and severe injuries avoided, if crashworthiness was harmonized for the whole fleet of vehicle. This calculation is done for France and is extended to all Europe.
The share of high-tensile steel in car bodies has increased over the last years. While occupant safety has generally benefited from this measure, there is a potential risk that, as a result, rescue time may increase considerably. In more than 60% of all car occupant fatalities a technical rescue has been necessary. These are in particular those cases where occupants die immediately at the accident scene. Therefore, in these cases "rescue time" is a very sensitive parameter. In addition to the general analysis of the need of technical rescue and the actual rescue time depending on model years, the injury pattern of occupants requiring technical rescue will be analysed to provide advice for rescue teams. Furthermore, a detailed analysis of rescue measures for the most popular car models depending on the safety cell design is given.