Filtern
Erscheinungsjahr
Dokumenttyp
Schlagworte
- Biomechanics (25) (entfernen)
Institut
- Sonstige (19)
- Abteilung Fahrzeugtechnik (14)
Nach wie vor ist die Anzahl von Unfällen motorisierter Einspurfahrzeuge (MESFz) mit sehr schweren Verletzungsfolgen oder tödlichem Ausgang für die Aufsassen im Vergleich zu allen anderen getöteten Verkehrsteilnehmern alarmierend hoch. Im Jahr 2013 wurden bei insgesamt 42.427 Unfällen MESFz 641 Aufsassen getötet und 12.034 schwer verletzt. Um dieser hohen Zahl schwerverletzter und getöteter Aufsassen von MESFz entgegenzuwirken, hat die Bundesanstalt für Straßenwesen (BASt) das vorliegende Projekt initiiert. Zielsetzung des Projektes war es, durch eine Analyse von Unfalldaten von MESFz, durch ergänzende computergestützte FEM-Simulationen und durch eine kritische Bewertung der UN-Regelung UN-R 22/05 (vormals ECE-R 22/05) hinsichtlich verletzungs-biomechanischer Inhalte (Versuche und Prüfwerte) Erkenntnisse zu erarbeiten, Handlungsbedarf festzustellen und Änderungs- und Ergänzungsvorschläge zur Überarbeitung der UN-R 22/05 sowie hinsichtlich allgemeiner Maßnahmen zu formulieren. Auf der Grundlage der amtlichen Unfalldaten des Statistischen Bundesamtes, Wiesbaden (DESTATIS) erfolgte eine Unfalldatenauswertung im Allgemeinen. Für eine detaillierte Analyse wurden Daten der "German In-Depth Accident Study" (GIDAS, Dresden und Hannover) ausgewählt. Bei etwa der Hälfte der im Teilumfang (n=199) untersuchten Unfälle von MESFz kam es zu Kopfverletzungen, überwiegend bei benutztem Schutzhelm. In 18 % lagen die führenden Verletzungen am Kopf; in 48 % blieb der Kopf unverletzt bei sonstigen schweren bis schwersten und tödlichen Verletzungen am Körper. Etwa 10 % der Aufsassen benutzten ein MESFz ohne bzw. mit absolut ungeeignetem Helm. Eine kritische Bewertung und Alternativvorschläge der derzeitigen Fassung der UN-R 22/05 wurden bezüglich der Punkte Prüfumfang, Prüfausstattung, Prüfdurchführung, Prüfkriterien und eine fälschungssicheren Homologations-Kennzeichnung erarbeitet.
The use of proper child restraint systems (CRS) is mandatory for children travelling in cars in most countries of the world. The analysis of the quantity of restrained children shows that more than 90% of the children in Germany are restrained. Looking at the quality of the protection, a large discrepancy between restrained and well protected children can be seen. Two out of three children in Germany are not properly restrained. In addition, considerable difference exists with respect to the technical performance of CRS. For that reason investigations and optimisations on two different topics are necessary: The technical improvement of CRS and the ease of use of CRS. Consideration of the knowledge gained by the comparison of different CRS in crash tests would lead to some improvements of the CRS. But improvement of child safety is not only a technical issue. People should use CRS in the correct way. Misuse and incorrect handling could lead to less safety than correct usage of a poor CRS. For that reason new technical issues are necessary to improve the child safety AND the ease of use. Only the combination of both parts can significantly increase child safety. For the assessment of the safety level of common CRS, frontal and lateral sled tests simulating different severity levels were conducted comparing pairs of CRS which were felt to be good and CRS which were felt to be poor. The safety of some CRS is currently at a high level. All well known products were not damaged in the performed tests. The performance of non-branded CRS was mostly worse than that of the well known products. Although the branded child restraint systems already show a high safety level it is still possible to further improve their technical performance as demonstrated with a baby shell and a harness type CRS.
This study is aimed to investigate the correlations of impact conditions and dynamic responses with the injuries and injury severity of child pedestrians by accident reconstruction. For this purpose, the pedestrian accident cases were selected from Sweden and Germany with detailed information about injuries, accident cars, and accident environment. The selected accident cases were reconstructed using mathematical models of pedestrian and passenger car. The pedestrian models were generated based on the height, weight, and age of the pedestrian involved in accidents. The car models were built up based on the corresponding accident car. The impact speeds in simulations were defined based on the reported data. The calculated physical quantities were analyzed to find the correlation with injury outcomes registered in the accident database. The reconstruction approaches are discussed in terms of data collection, estimating vehicle impact speeds, pedestrian moving speeds and initial posture, secondary ground impact, validity of the mathematical models, as well as impact biomechanics.
A flexible pedestrian legform impactor (FlexPLI) has been evaluated by a Technical Evaluation Group (Flex-TEG) of the Working Party on Passive Safety (GRSP) of the United Nations Economic Commission for Europe (UN-ECE). It will be implemented within phase 2 of the global technical regulation (GTR 9) as well as within a new ECE regulation on pedestrian safety as a test tool for the assessment of lower extremity injuries in lateral vehicle-to-pedestrian accidents (UN-ECE 2010-1, 2010-2 and 2010-3). Due to its biofidelic properties in the knee and tibia section, the FlexPLI is found to having an improved knee and tibia injury assessment ability when being compared to the current legislative test tool, the lower legform impactor developed by the Pedestrian Safety Working Group of the European Enhanced Vehicle-safety Committee (EEVC WG 17). However, due to a lack of biofidelity in terms of kinematics and loadings in the femur part of the FlexPLI, an appropriate assessment of femur injuries is still outstanding. The study described in this paper is aimed to close this gap. Impactor tests with the FlexPLI at different impact heights on three vehicle frontends with Sedan, SUV and FFV shape are performed and compared to tests with a modified FlexPLI with upper body mass. Full scale validation tests using a modified crash test dummy with attached FlexPLI that are carried out for the first time prove the more humanlike responses of the femur section with applied upper body mass. Apart from that they also show that the impact conditions described in the current technical provisions for tests with the FlexPLI don"t necessarily compensate the missing torso mass in terms of knee and tibia loadings either. Therefore it can be concluded that an applied upper body mass will contribute to a more biofidelic overall behavior of the legform and subsequently an improved injury assessment ability of all lower extremity injuries addressed by the FlexPLI. Nevertheless, the validity of the original as well as the modified legform for tests against vehicles with extraordinary high bumpers as well as flat front vehicles still needs to be evaluated in detail. A first clue is given by the application of an additional accelerometer to the legform.
A legform impactor with biofidelic characteristics (FlexPLI) which is being developed by the Japanese Automobile Research Institute (JARI) is being considered as a test tool for legislation within a proposed Global Technical Regulation on pedestrian protection (UNECE, 2006) and therefore being evaluated by the Technical Evaluation Group (TEG) of GRSP. In previous built levels it already showed good test results on real cars as well as under idealised test conditions but also revealed further need for improvement. A research study at the Federal Highway Research Institute (BASt) deals with the question on how leg injury risks of modern car fronts can be revealed, reflected and assessed by the FlexPLI and how the impactor can be used and implemented as a legislative instrument for the type approval of cars according to current and future legislations on pedestrian protection. The latest impactor built level (GTα ) is being evaluated by a general review and assessment of the certification procedure, the knee joint biofidelity and the currently proposed injury criteria. Furthermore, the usability, robustness and durability as a test tool for legislation is examined and an assessment of leg injuries is made by a series of tests with the FlexPLI on real cars with modern car front shapes as well as under idealised test conditions. Finally, a comparison is made between the FlexPLI and the current european legislation tool, the legform impactor according to EEVC WG 17.