Filtern
Erscheinungsjahr
- 2009 (119) (entfernen)
Dokumenttyp
- Konferenzveröffentlichung (54)
- Buch (Monographie) (32)
- Wissenschaftlicher Artikel (19)
- Bericht (5)
- Arbeitspapier (5)
- Teil eines Buches (Kapitel) (3)
- Sonstiges (1)
Schlagworte
- Deutschland (50)
- Germany (50)
- Konferenz (46)
- Conference (45)
- Forschungsbericht (42)
- Research report (39)
- Unfall (35)
- Accident (33)
- Bewertung (31)
- Safety (22)
Institut
It is well known that motorcycle riding is fascinating but quite more dangerous than for example car driving. In 2006, 5,091 persons were killed as victims of crashes occurring on public roads in Germany. 52% (2,683) were car occupants, 16% (793) motorcycle riders, 14% (711) pedestrians, 10% (486) bicycle riders, 5% (235) commercial vehicle occupants, 2% (107) riders of smaller powered two-wheelers, called "Mofa, Moped and Mokick". This shows that motorcycle riders recently are the second largest group of killed traffic participants in Germany. Latest information coming from the Federal Statistics predict for the year 2007 the figure of 4,958 killed road victims in total. This would be again a successful reduction (-133 killed persons or "2.6% compared to the year 2006). But the news coming from the Federal Statistics during the year 2007 and at the begin of 2008 did not always tell the same positive story. It is questioned whether the positive trend of substantially reduced figures of killed road user year by year will longer continue for Germany. That means it could be impossible to reach the ambitious target, set by the European Commission, to cut in half the figure of killed road users until the year 2010 " compared to the figure for the year 2001. It was reported that the group of 45 to 49 years old traffic participants (all traffic modes) is conspicuous with an increase of 30% up to 297 killed road users in total from January to August 2007. This increase can be ascribed in particular by an increase of killed motorcycle riders within this age group. Due to mild weather conditions in Germany in 2007 the season for motorcycle riding began relatively early and this may be a main reason for the increase of the figure of killed motorcycle riders by 16% from January to August 2007. With this background the accident occurrence of motorcycles became more and more essential. As part of the actual discussion about historical trends, recent emphases, causes and relevant structures of the events of motorcycle crashes it is evident, to have latest and carefully updated figures coming from both the Federal Statistics and In-depth studies. The paper will give a contribution to this using the German Federal Statistics and in-depth studies, for example GIDAS. Additional data coming from the DEKRA Motorcycle Accident Database as well as from literature are considered, too. The paper will help to describe the current situation of the accident involvement of motorcycles in Germany.
Side impacts, both nearside and farside, have been indicated by research to be responsible for a large proportion of serious injuries from road crashes. This study aimed to compare and contrast the characteristics of nearside and farside crashes in Australia, Germany and the U.S., using the ANCIS, GIDAS and NASS/CDS in-depth-databases, in order to establish the impact and injury severity associated with these crashes, and the types of injuries sustained. The analyses revealed some interesting similarities, as well as differences, between both nearside and farside crashes, and the emergent trends between the three investigated countries. More specifically, it was indicated that whilst the severity of injury sustained in nearside crashes was slightly greater overall than that found for farside crashes, careful consideration of struck and nonstruck side occupants must be made when considering aspects such as vehicle design and occupant protection.
Over the last decades the number of traffic accident fatalities on German roads decreased by 77% down to 4968 in the year 2007. This positive development is due to optimisations of vehicle safety, roads and infrastructure and medical rescue issues. Up to now mostly the optimisations of secondary safety measures lead to this effect on vehicle safety. Since some years more and more driver assistance systems are available and lead to a further reduction of all accidents. These new systems are often comfort systems and have not primarily been developed to increase vehicle safety. In contrast to secondary safety systems primary safety systems are able to mitigate and avoid accidents. So in the future it is important to estimate the benefit of these systems in reducing accident numbers as well. Current benefit estimation methods mostly focus on a single system only and not on the combination of systems. In this paper a new method for a multivariate benefit estimation based on real accident data is developed. The paper describes the basic method to estimate the benefit of primary and secondary safety systems in combination. With the presented method the benefit will not be overestimated as it would be by a simple addition of the benefits of single systems. The model will be validated by a multivariate prospective benefit estimation of different vehicle safety systems in comparison to single benefit estimations of the same systems. For this the German In-Depth Accident Database is used. The results show the importance to implement the interactions of safety systems in the estimation process and rate the overestimation by a simple addition of the single system benefits. The validation includes primary and secondary safety systems in combination. The validation is done using more than 3500 real accidents which were initiated by cars. This sample out of the GIDAS database is representative for the current accident situation in Germany. The paper shows the necessity of a multivariate estimation of the benefit for existing and future safety systems.
Bestimmung der vertikalen Richtcharakteristik der Schallabstrahlung vom Pkw, Transportern und Lkw
(2009)
Ziel der vorliegenden Untersuchungen war die messtechnische Bestimmung der spektralen horizontalen und vertikalen Richtcharakteristik sowie der Schallleistung von Fahrzeugen verschiedenen Typs während der Vorbeifahrt mit Hilfe eines Mikrofonarray-Messsystems. Diese Informationen sind wesentlich für die Schallausbreitung sowie die Wirksamkeit von Schallschutzmaßnahmen. Neben der gesamten Schallabstrahlung sollte der spektrale Gehalt des emittierten Schalls ermittelt werden. Grundlage des angewendeten Messverfahrens ist die Ausnutzung der steuerbaren Richtwirkungseigenschaft eines Mikrofonarrays. Durch Fokussierung des Mikrofonarrays auf das zu untersuchende Fahrzeug während der Vorbeifahrt können Störquellen ausgeblendet werden. Die ermittelten Schalldruckkartierungen ermöglichen die Berechnung der Richtcharakteristik und eine Abschätzung der Schallleistung des Fahrzeugs. Die Richtcharakteristik des eingesetzten Mikrofonarrays wurde im Hinblick auf die Lokalisation des vorbeifahrenden Fahrzeugs optimiert. Da für die Untersuchungen ausschließlich die Quelllokalisation in horizontaler beziehungsweise vertikaler Richtung notwendig ist, wurde ein Linienarray gewählt. Gegenüber einem zweidimensionalen Mikrofonarray erhöhen sich bei gleicher Mikrofonanzahl die örtliche Auflösung und die Nebenkeulenunterdrückung. Unter Einsatz des optimierten Linienarrays erfolgten Messungen im fließenden Verkehr bei kontrollierter Vorbeifahrt eines Pkw, eines Kleintransporters und eines Lkw mit ausgewählten Geschwindigkeiten. Die horizontale Richtcharakteristik wurde durch Lokalisation des vorbeifahrenden Fahrzeugs zu verschiedenen Zeitpunkten bestimmt. Durch wiederholte Vorbeifahrt bei gleicher Geschwindigkeit mit variierter Höhe des vertikal positionierten Mikrofonarrays konnte die mittlere vertikale Richtcharakteristik ermittelt werden. Für die Abschätzung der Schallleistung wurde das Hüllflächen-Verfahren an die näherungsweise Schallleistungsbestimmung bewegter Quellen mit Mikrofonarray angepasst.
A lot of factors are related to a road traffic accident; particularly human factors such as road use characteristic, driving maneuver characteristic and safety attitude are the major ones. As a random factor is also included, so it is necessary to minimize the contribution of a random factor to identify human factors related to a road traffic accident. There are several standpoints for traffic accident analysis, such as vehicle-based, location-based and driver-based. And it is effective to analyze driver-based traffic accident data for discussion on the relation between human factors and accidents. An integrated traffic accident database system was developed for analysis considering driver- accident and violation records by ITARD, and several studies were carried out for the evaluation. Useful data for discussion on the relation between types of collision and traffic violations, and the effect of accident experience to the following accident were obtained.
Ziel des Forschungsprojektes ist es, die Überprüfung der Fahreignung nach Fahrerlaubnis-Verordnung (FeV), Anlage 5, auf eine operationalere Basis zu stellen, die in der FeV und den Begutachtungs-Leitlinien Kapitel 2.5 genannten Begriffe inhaltlich zu schärfen und Vorschläge für einen "Testkanon" beziehungsweise für Weiter- und Neuentwicklungen von standardisierten Tests zur Begutachtung zu erarbeiten. Bei der Analyse der derzeit eingesetzten Testverfahren zur Überprüfung der psychometrischen Leistungsfähigkeit auf Basis der von der FeV geforderten wissenschaftlichen Standardisierung und Validierung zeigt sich, dass erheblicher Optimierungsbedarf besteht, insbesondere bei der Normierung und der Dokumentation der Testgütekriterien. In Einzelfällen fehlen sogar essenzielle Angaben. Die Herleitung der zu messenden Konstrukte ist ebenfalls oft unzureichend, teilweise gar nicht dokumentiert. Die Ergebnisse der kritischen Durchsicht wurden auf einem Workshop mit Experten aus Wissenschaft und Praxis diskutiert. Als Ergebnis des Forschungsprojektes lässt sich kurzfristiger und langfristiger Optimierungsbedarf festhalten. Kurzfristig sollten die eingesetzten Testverfahren anhand vorher festgelegter Kriterien überarbeitet und an entsprechend großen repräsentativen Stichproben geeicht werden. Die Testgütekriterien müssen nachprüfbar angegeben werden. Langfristig sollten aus wissenschaftlicher Perspektive die in der FeV, Anlage 5, genannten psychologischen Konstrukte grundsätzlich überarbeitet werden. Auch sollten die in der Fahreignungsdiagnostik angewendeten Entscheidungskriterien (Prozentränge) durch absolute Kennwerte ersetzt werden, die auf dem Wissen über die Zusammenhänge zwischen Leistung und Fahreignung basieren. Ein unabhängiges wissenschaftliches Gremium sollte die Güte und Zulassung der Testverfahren regelmäßig überprüfen. In einem Teilprojekt wurde außerdem der Frage nachgegangen, inwieweit unterschiedliche Hardware- und Softwarekonstellationen die Objektivität der Reaktionszeitmessungen beeinflussen können. Die Ergebnisse zeigen, dass die zuverlässige Ermittlung von Reaktionszeiten in erster Linie von der grundsätzlichen Eichung eines Testverfahrens abhängt. Computergestützte Leistungstests sollten deshalb in vom Hersteller zugelassenen Computerumgebungen im Durchschnitt bei unterschiedlichen Konfigurationen keinen Messfehler ausweisen, um einen Nachteil für Führerscheinbewerber auszuschließen. Außerdem müssten maximal mögliche Abweichungen und Konfidenzintervalle für zugelassene Konfigurationen angegeben werden, sowie Normwerttabellen vollständig einsehbar sein.
Ziel der vorliegenden Arbeit war es, Maßnahmen, die zur Beseitigung von Unfallhäufungen umgesetzt werden, im Hinblick auf ihre Effektivität und Effizienz zu analysieren. Es sollte insbesondere darauf eingegangen und aufgezeigt werden, dass längerfristige, umfangreichere straßenbauliche Maßnahmen zweckmäßig undwirkungsvoll zur Beseitigung von Unfallhäufungsstellen eingesetzt werden können. Gerade vor dem Hintergrund knapper öffentlicher Gelder und der wachsenden Bedeutung einer möglichst effektiven und effizienten Verwendung der Mittel ist die Wahl einer geeigneten Maßnahme zur Beseitigung einer Unfallhäufung bedeutend. Dazu wurde eine Beispielsammlung mit geeigneten Maßnahmen zur Bekämpfung von Unfallhäufungen entwickelt, in dem die Effizienz (auf der Basis von Nutzen/Kosten-Vergleichen) sowie die Effektivität (in Form der vermiedenen Unfallkosten und der Maßnahmenwirkung) für verschiedene Lösungen beispielhaft dargestellt werden. Jedes Beispiel wurde darüber hinaus zusammenfassend bewertet und untersucht, ob die Wirkung der Maßnahme wahrscheinlich signifikant ist. Die Ergebnisse wurden in Form einer Beispielsammlung praxisorientiert aufbereitet. Diese kann die Unfallkommissionen und/oder die politischen Entscheidungsträger unterstützen die Vor- und Nachteile einer geplanten Maßnahme abzuschätzen. Sie zeigt alternative Möglichkeiten auf und weist auf nur bedingt oder nicht geeignete Maßnahmen hin. Zusätzlich kann die Beispielsammlung für die Beurteilung von Sicherheitsdefiziten von Sicherheitsauditoren für Straßen angewendet werden. Sie steht zum Download zur Verfügung. Für die Erhebung der Daten wurden bundesweit 65 Unfallkommissionen kontaktiert und 110 Unfallhäufungen ausgewählt, die in der Beispielsammlung dargestellt sind. Resümierend kann festgehalten werden, dass bauliche Maßnahmen im Schnitt eine höhere Maßnahmenwirkung besitzen, eine größere Anzahl von Unfällen (und Unfällen mit Personenschaden) reduzieren, höhere Unfallkosten vermeiden und in ihrer Wirkung signifikanter sind. Bauliche Maßnahmen können in den meisten Fällen effizient eingesetzt werden, weisen jedoch aufgrund ihrer hohen Baukosten in der Regel ein geringeres Nutzen/Kosten-Verhältnis als verkehrstechnische Maßnahmen auf.
The focus of the technical innovation in the automobile industry is currently changing to sensor based safety systems, which are operating in the pre-crash phase of an accident. To get more information about this pre-crash phase for real accidents a simulation of this phase using the GIDAS database is done. The basics for this simulation are geometrical information about the accident location and the exact accident data out of the GIDAS database. This aggregated information gives the possibility to simulate an exact motion for every accident participant, using MATLAB / SIMULINK, in the pre-crash phase. After the simulation the information about the geometrical positions, the velocities and maneuvers of the drivers to an individual TTC (time to collision) are available. With those results it is possible to develop new useful sensor geometries using pre-crash scatter plots or estimate the efficiency of implemented active safety systems in combination with sensor characteristics. This simulation can be done for every reconstructed accident included in the GIDAS database, so these results can represent a wide spread basis for the further development of active safety systems and sensor geometries and characteristics
This paper describes the methodology for the assessment of the socio-economic impact of SAFESPOT applications. The applications selected for the assessment cover vehicle to vehicle (v2v) as well as vehicle to infrastructure (v2i) communication systems. The applications address main problem areas of road safety: accidents at intersections, accidents due to hazardous road and weather conditions and accidents due to over speeding and inappropriate distance. The assessment methodology relies in its core on cost-benefit analysis (CBA) as the most widespread tool to assess the profitability of applications form the society point of view. The assessment is however not limited to CBA but also considers the economic effects for particular stakeholder groups such as users, public authorities and the like. Their individual cost and benefits can be investigated in stakeholder analyses. Both elements, CBA and stakeholder analysis, form an integrated assessment approach which is applied here. The assessment makes use of the sound methodological base which was provided by projects such as SEiSS and eIMPACT. Some characteristics of co-operative systems however call for special attention within the assessment. Most prominently, the assessment will concentrate on a bundle of applications. The impact of this bundle will be assessed under the conditions of different business and service models. These issues will be addressed in the paper. Moreover, this paper also provides insight in likely patterns of results and first results of socio-economic impact assessment itself.
In einem Kurzabriss wird über ein Forschungsvorhaben berichtet, das zum Ziel hat, geeignete Maßnahmen zur Heizung von Straßenbrücken zwecks Glättevermeidung im Winter zu entwickeln. Das Projekt wird durch die Bundesanstalt für Straßenwesen betreut und durch die RWTH Aachen und die Universität der Bundeswehr München bearbeitet. Es ist bekannt, dass Brückenfahrbahntafeln eher vereisen als die angrenzende Strecke und damit ein erhöhtes Sicherheitsrisiko für den Verkehrsteilnehmer bilden. Bisher wird diesem Gefahrenpotenzial durch ein Frühwarnsystem mit vorsorglichem Streudienst oder in einigen besonders gefährdeten Bereichen durch Taumittelsprühanlagen begegnet. Die Salzstreuung bringt jedoch Nachteile für die Dauerhaftigkeit der Brücken und für die Umwelt mit sich. Eine intelligente Beheizung der Fahrbahntafeln mit Nutzung der Geothermie bildet eine umweltschonende Variante zur Vermeidung von Glättebildungen auf Brücken. Wird die Geothermie auch im Sommer betrieben, so könnte die Fahrbahnplatte gekühlt und damit der Bildung von Spurrinnen entgegengewirkt werden. In europäischen Nachbarländern gibt es bereits ausgeführte Pilotprojekte der Brückenheizung, bei denen jedoch eine vollständige Freihaltung von Eis vorgenommen wird. Bei dem vorgestellten Forschungsvorhaben soll hingegen das Vereisungsverhalten auf der Brücke dem der Strecke angepasst werden. Dies erfolgt mittels einer neu entwickelten Mess-, Steuerungs- und Regelungsanlage, die die meteorologischen und bauwerksspezifischen Randbedingungen berücksichtigt und gleichzeitig den Energieaufwand minimiert. Nach durchgeführten Laboruntersuchungen wurde das System auf einem Freigelände mit gutem Erfolg getestet. Im nächsten Schritt wird im Rahmen der Erneuerung einer Straßenbrücke im Zuge der B 208 über den Elbe-Lübeck-Kanal ein Pilotprojekt durchgeführt.
The head impact of pedestrians in the windscreen area shows a high relevance in real-world accidents. Nevertheless, there are neither biomechanical limits nor elaborated testing procedures available. Furthermore, the development of deployable protection systems like pop-up bonnets or external airbags has made faster progress than the corresponding testing methods. New requirements which are currently not considered are taken into account within a research project of BASt and the EC funded APROSYS (Advanced PROtection SYStems) integrated project relating to passive pedestrian protection. Testing procedures for head impact in the windscreen area should address these new boundary conditions. The presented modular procedure combines the advantages of virtual testing, including full-scale multi-body and finite element simulations, as well as hardware testing containing impactor tests based on the existing procedures of EEVC WG 17. To meet the efforts of harmonization in legislation, it refers to the Global Technical Regulation of UNECE (GTR No. 9). The basis for this combined hardware and virtual testing procedure is a robust categorization covering all passenger cars and light commercial vehicles and defining the testing zone including the related kinematics. The virtual testing part supports also the choice of the impact points for the hardware test and determines head impact timing for testing deployable systems. The assessment of the neck rotation angle and sharp edge contact in the rear gap of pop-up bonnets is included. For the demonstration of this procedure, a hardware sedan shaped vehicle was modified by integrating an airbag system. In addition, tests with the Honda Polar-II Dummy were performed for an evaluation of the new testing procedure. Comparing these results, it was concluded that a combination of simulation and updated subsystem tests forms an important step towards enhanced future pedestrian safety systems considering the windscreen area and the deployable systems.
A flexible pedestrian legform impactor (FlexPLI) with biofidelic characteristics is aimed to be implemented within global legislation on pedestrian protection. Therefore, it is being evaluated by a technical evaluation group (Flex-TEG) of GRSP with respect to its biofidelity, robustness, durability, usability and protection level (Zander, 2008). Previous studies at the Federal Highway Research Institute (BASt) and other laboratories already showed good progress concerning the general development, but also the need for further improvement and further research in various areas. An overview is provided of the different levels of development and all kinds of evaluation activities of the Flex-TEG, starting with the Polar II full scale pedestrian dummy as its origin and ending up with the latest legform impactor built level GTR that is expected to be finalized by the end of the year 2009. Using the latest built levels as a basis, gaps are revealed that should be closed by future developments, like the usage of an upper body mass (UBM), the validation of the femur loads, injury risk functions for the cruciate knee ligaments and an appropriate certification method. A recent study on an additional upper body mass being applied for the first time to the Flex-GT is used as means of validation of recently proposed modified impact conditions. Therefore, two test series on a modern vehicle front using an impactor with and without upper body mass are compared. A test series with the Flex-GTR will be used to study both the comparability of the impact behavior of the GT and GTR built level as well as the consistency of test results. Recommendations for implementation within legislation on pedestrian protection are made.
Evaluation of the performance of competitive headforms as test tools for interior headform testing
(2009)
The European Research Project APROSYS has evaluated the interior headform test procedure developed by EEVC WG 13, representing the head contact in the car during a lateral impact. One important aspect within this test procedure was the selection of an appropriate impactor. The WG13 procedure currently uses the Free Motion Headform as used within the FMVSS 201. The ACEA 3.5 kg headform used in Phase 1 of the European Directive and the future European Regulation on Pedestrian Protection is still discussed as a possible alternative. This paper reports work performed by the Federal Highway Research Institute (BASt) as a part of the APROSYS Task 1.1.3. The study compares the two headform impactors according to FMVSS and ACEA, in a series of basic tests in order to evaluate their sensitivity towards different impact angles, impact accuracy, the effect of differences to impactors of the same type and the effects of the repeatability and reproducibility of the test results. The test surface consisted of a steel tube covered with PU foam and PVC, representing the car interior to be tested. Despite of the higher mass of the FMH the HIC values of this impactor were generally lower than those of the ACEA headform. The FMH showed a higher repeatability of test results but a high sensitivity on the angle of roll, the spherical ACEA impactor performed better with regards to the reproducibility. In case of the ACEA impactor-, the angle of roll had no influence.
This study was one part of the research activities of work package 5 "Rehabilitation" of the integrated EU DRUID project (6th Framework Programme). It aimed at gathering information about the cognitive"affective and behavioral processes that participants undergo while attending driver rehabilitation (DR) programs. The primary objective was to analyze the outcomes of group interventions for alcohol offenders in order to assess any cognitive, motivational and behavioral modifications within individual participants and to identify the relevant variables which initiate and support this change process. The general methodological concept of the study was a prospective cohort design of participants of group-based European driver rehabilitation programs, carried out via a participant feedback questionnaire survey. In total N=7.339 DUI offenders in 9 European countries (Austria, Belgium, France, Germany, Great Britain, Hungary, Italy, Netherlands and Poland) participated in the survey. The results indicate that DR participants feel such programs provide strong support for their cognitive and behavioral change processes. The findings suggest that participants feel encouraged to establish new behavioral goals and the commitment to stick to them. At the same time, the participants' ratings emphasize the important role of the course leader in encouraging such changes. The findings of this explorative questionnaire survey are promising. Although it is impossible to draw any conclusions regarding long-term behavioral changes or effects on recidivism rates, participants of DR courses express positive feedback on completion of the program. The positive outcomes of the study can motivate decisionmakers to launch DR measures and to regard them as an essential part of a comprehensive countermeasure system against DUI.
Anhand verkehrssicherheitsrelevanter, wirtschaftlicher und juristischer Überlegungen werden Bedenken seitens des Gesetzgebers bezüglich einer Einführung von Regelungen für den Einsatz atemalkoholgesteuerter Wegfahrsperren (Alkohol Interlocks) in Deutschland verdeutlicht. Dabei wird auf die Anforderungen, die hinsichtlich der Kosten und Qualität der Produkte gestellt werden, aufmerksam gemacht. Darüber hinaus wird die derzeit geltende Rechtslage, die eine Nutzung von Alkohol Interlocks im Rahmen der Begutachtung der Fahreignung und begleitender rehabilitativer Programme für Trunkenheitsfahrer möglich erscheinen lässt, dargestellt. In diesem Zusammenhang wird auf die Anforderungen an das Qualitätsmanagement, vor allem im Bereich der Qualitätssicherung, etwaiger Interlock-Programme für Trunkenheitsfahrer hingewiesen.
The aim of this study was to evaluate the performance and accuracy of Event Data Recorders (EDRs). The analysis was based on J-NCAP crash tests from 2006"2007, with the corresponding EDR datasets. The pre-crash velocity, maximum delta-V and delta-V versus time history data recorded in the EDRs were compared with the reliable crash test data. The difference between the EDR pre-crash velocity and the laboratory test speed was less than 4 percent. In contrast, in several cases the maximum delta-V and delta-V versus time history data obtained from the EDRs showed uncertainty of measurement in comparisons with the reliable delta-V data. The difference in maximum delta-V in these comparisons was more than 5 percent in 10 of 14 tests and more than 10 percent in 4 of 14 tests. The EDRs underestimated the maximum delta-V in almost all tests. It was also concluded that the calculated acceleration from the EDR delta-V versus time history data showed good agreement with the instrumented accelerometer signal during the collision in almost all tests.
It has been pointed that most of the accidents on the roads are caused by driver faults, inattention and low performance. Therefore, future active safety systems are required to be aware of the driver status to be able to have preventative features. This probe study gives a system structure depending on multi-channel signal processing for three modules: Driver Identification, Route Recognition and Distraction Detection. The novelty lies in personalizing the route recognition and distraction detection systems according to particular driver with the help of driver identification system. The driver ID system also uses multiple modalities to verify the identity of the driver; therefore it can be applied to future smart cars working as car-keys. All the modules are tested using a separate data batch from the training sets using eight drivers" multi-channel driving signals, video and audio. The system was able to identify the driver with 100% accuracy using speech signals of length 30 sec or more and a frontal face image. After identifying the driver, the maneuver/ route recognition was achieved with 100% accuracy and the distraction detection had 72% accuracy in worst case. In overall, system is able to identify the driver, recognize the maneuver being performed at a particular time and able to detect driver distraction with reasonable accuracy.
In an on-going project since 2005, ADAC has been analyzing accidents documented by the ADAC air rescue service. The knowledge derived from real-life accidents serves as a basis for new test configurations and assessment criteria. In 2007, ADAC began looking into the feasibility of international data collection. The idea of Global Accident Prevention was born. Three European partner clubs have begun pioneering the project (ÖAMTC, ANWB, and RACC). The aim is to set up an international accident research network to provide a steady stream of information on road accidents. The FIA Foundation supports ADAC in developing and coordinating this initiative.
In der vorliegenden Studie wird der Einfluss von arbeits- und tätigkeitsbezogenen Belastungen und Stress auf das Verkehrsverhalten von Lkw-Fahrern im Straßengüterverkehr untersucht. Ausgangspunkt der Überlegungen ist das transaktionale Stressmodell, das ein Zusammenwirken von Person und Umwelt im Umgang mit Stress annimmt. Insgesamt wurden 555 Lkw-Fahrer nach ihren Arbeitsbedingungen, den wesentlichen Belastungsfaktoren, ihrem Umgang mit tätigkeitsbezogenem Stress sowie ihrem Fahrverhalten und ihrer Verkehrsauffälligkeit befragt. Im Ergebnis kristallisieren sich die verkehrlichen Rahmenbedingungen der Lkw-Fahrertätigkeit als zentrale Belastungsaspekte heraus, wie schlechte Rastmöglichkeiten, das Verhalten anderer Verkehrsteilnehmer und ein hohes Verkehrsaufkommen. Es zeigen sich deutliche Zusammenhänge zwischen Stresserleben und -bewältigung und dem Verkehrsverhalten von Lkw-Fahrern. Grundsätzlich erweist sich insbesondere ein aggressiv-konfrontativer Umgang mit Stress als problematisch für ein verkehrssicheres Verhalten. Sicherheitsfördernd wirkt sich dagegen eine hohe Gefahrenwahrnehmung und ein aufgabenorientiertes Stressbewältigungsverhalten aus. Es werden sechs Fahrertypen identifiziert, die sich jeweils durch charakteristische Konstellationen der Stressbewältigung und des Verkehrsverhaltens auszeichnen. Der "Draufgänger-Typ" und der "gestresste Typ", zusammen etwa ein Drittel der befragten Fahrer, erweisen sich als besondere Risikogruppe. Anhand eines pfadanalytischen Modells werden Wirkungszusammenhänge zwischen arbeitsbezogenen Belastungen, Stressbewältigung und Verkehrsauffälligkeit von Lkw-Fahrern aufgezeigt. Aus den Ergebnissen der Untersuchung sowie den Ergebnissen eines abschließenden Experten-Workshops werden Ansatzpunkte für Maßnahmen zur Erhöhung der Verkehrssicherheit von Lkw-Fahrern abgeleitet.