Es wird die Entwicklung einer Anlage zur Zählung von Fahrzeugachsen, die eine Straße überrollen, beschrieben. Diese Anlage gestattet, je nach Konfiguration, eine getrennte Erfassung von Pkw, Lkw und spikesbereiften Achsen. Eine Aufzeichnung der Zählergebnisse in vorwählbaren Zeitabständen (1 Stunde bis 1 Tag) auf einem Datenträger (z.B. 5-Kanal-Lochstreifen) kann vorgenommen werden. Mehrere Anlagen in verschiedenen Konfigurationen sind z.T. seit Jahren in Betrieb. Netz- und Batteriebetrieb sind möglich. Beispiele für Ergebnisse mit je nach Anlagentyp unterschiedlicher Aussagekraft werden gegeben.
Im Rahmen eines Gemeinschaftsprojektes der Technischen Universität München und des ADAC, Abteilung Verkehrstechnik, wurden im süddeutschen Autobahnnetz 4 Messstellen eingerichtet, an denen seit 1976 bzw. 1977 monatliche lokale Geschwindigkeiten und Fahrzeugabstände erhoben werden. Von der Bundesanstalt für straßenwesen wurden seit 1978 sieben weitere Messstellen auf dem nord- und westdeutschen Autobahnnetz eingerichtet, an denen zweimal jährlich Messungen durchgeführt werden. Damit können Trends und Entwicklungen im Geschwindigkeits- und Abstandsverhalten erkannt werden. Der Bericht gliedert sich in die Beschreibung der Voruntersuchung, die Beschreibung der Erweiterung der Analyse auf das Autobahnnetz und die Darstellung der Ergebnisse aller Erhebungen. Ein Rückschluss auf das absolute Geschwindigkeitsniveau im Gesamtnetz kann aus den Ergebnissen der einzelnen Messstellen nicht abgeleitet werden.
Erhebungen am Unfallort
(1983)
Der Bericht einer Projektgruppe bei der Bundesanstalt für Straßenwesen beschreibt einleitend das Projekt "Unfallerhebung Hannover (uh)". Weitere Spezialerhebungen aus dem Bereich der empirischen Unfallforschung werden beispielhaft dargestellt und mit der Unfallerhebung Hannover verglichen. Der Vergleich dient der Herausarbeitung spezieller Eigenschaften und Möglichkeiten dieses Projektes und der Beurteilung der Aussagefähigkeit des gewonnenen Datenmaterials. Unter Berücksichtigung bereits vorhandener Daten aus anderen Erhebungen und des Datenbedarfs der Unfallforschung wird die Notwendigkeit von Erhebungen am Unfallort erörtert und alternative Konzepte hierfür entwickelt. Abschließend wird eine neue nutzungsorientierte Konzeption für ein zukünftiges Projekt zur Datengewinnung durch Erhebung am Unfallort vorgeschlagen.
Die neuen Kommunikationstechniken lösen eine Reihe von Fragen aus: Welches System ist zukunftssicher und einführbar?, Welche Informationen nützen dem Autofahrer, ohne dass die Übermittlung seine Aufmerksamkeit vom Fahren ablenkt?, Welche Kosten erfordert ds System?, Kann die erforderliche Organisation aufgebaut werden? Für die Eigenschaften eines Fahrzeuginternen Leit- und Informationssystems (FZ-LI) sollten die Bedürfnisse des Benutzers Vorrang vor dem technisch Machbaren haben. Verkehrstechnisch behält die externe Beschilderung die Priorität. Das FZ-LI liefert nur eine zusätzliche Information. Zum Betrieb bedarf es einer hochwertigen Organisation und technischen Ausstattung für die Erfassung und Verarbeitung von verkehrsrelevanten Daten, zur Ableitung von aktuellen Leitprogrammen und Information der Kraftfahrer. Hierfür sind regionale Leitzentralen nötig, die nur von staatlichen Stellen aufgebaut und betrieben werden können. Die Untersuchung der Investitions- und Folgekosten der öffentlichen Hand werden angegeben. Für die Infrastruktur kommen freistahlende Sender und Baken in Frage. Ausgangsstufen für FZ-LI sind autarke Orientierungssysteme und das Autoradio. Die Erörterung der technischen Realisierbarkeit eines FZ-LI sowie seiner Einzelkomponenten kommt zu dem Schluss, dass keine grundlegenden Schwierigkeiten zu erwarten sind. Das eigentliche Problem ist die Realisierung der Organisation eines Verkehrsmanagements im Rahmen der vorhandenen Struktur der öffentlichen Verwaltung.
Die derzeitige Verkehrserfassung soll stufenweise verbessert werden. Erste Stufe ist die Einführung von ARIAM: Das Bundesverkehrsministerium will die Voraussetzungen dafür schaffen, dass Informationen unmittelbar aus Zähldaten an den Autobahnen erhoben werden können. Zur Organisation für ein verbessertes Informationssystem ist die Verknüpfung der zuständigen Behörden, die Einrichtung von Leitzentralen und deren Verbindung durch einen Datenpool notwendig.
Die von verschiedenen internationalen Organisationen veröffentlichten Daten zur Verkehrssicherheit erweisen sich für die verkehrspolitischen Informationsbedürfnisse und für Zwecke der Unfallforschung häufig nicht als ausreichend. In Absprache mit dem Bundesministerium für Verkehr und der Bundesanstalt für Straßenwesen wurde daher eine Datenbank internationaler Verkehrs- und Unfalldaten aufgebaut. Berichtet wird über die Vorgehensweise bei der Datenbeschaffung und der Aufschlüsselung der Struktur der gespeicherten Daten. Für die Datenpflege und -fortschreibung ist in einer Quellendatenbank zu jeder abgespeicherten Zahl die zugehörige Quelle verzeichnet. Zum Aufbau der Datenbank wurde das Datenbanksystem SIR mit hierarchischem Aufbau verwendet. Nach dem Erreichen eines hinreichenden Ausbauzustandes soll die Datenbank allen Benutzern des Rechenzentrums BMV/BASt offenstehen.
In der Bundesanstalt für Straßenwesen (BASt) wurde die "Datenbank internationaler Verkehrs- und Unfalldaten" (INVUD) eingerichtet, in der internationale Daten zum Verkehrs- und Unfallgeschehen sowie zu den Einwohnerzahlen und Fahrzeugbeständen gesammelt und DV-gestützt verarbeitet werden. Ein erster Bericht über diese INVUD-Datenbank wurde bereits Anfang 1987 als Heft 152 der Forschungsberichte der Bundesanstalt für Straßenwesen, Bereich Unfallforschung, veröffentlicht. Inzwischen ist der Ausbau der INVUD-Datenbank weit vorangeschritten. Seit Anfang 1988 besteht ein Kooperationsvertrag mit der Kommission der Europäischen Gemeinschaften (KEG), in dessen Rahmen unter anderem der Kreis der Länder, deren Daten gesammelt werden, auf alle EG-Länder erweitert worden ist. Zu den Vorteilen der Kooperation mit der KEG gehört auch deren wirkungsvolle Unterstützung bei der Beschaffung noch fehlender Daten. Für die Zukunft wird im Rahmen des OECD Road Transport Research Programme geplant, dass die hier beschriebene INVUD-Datenbank als Kern einer "IRTAD - International Road Transport and Accident Data Base" auf alle OECD-Länder ausgedehnt wird und zur internationalen Nutzung gelangt. Nachdem die bisherigen Ausbauabschnitte der INVUD-Datenbank weitgehend abgeschlossen sind, wird mit dem vorliegenden Bericht der Sachstand zu Beginn des Jahres 1989 dokumentiert und eine Informationsbasis für künftige Daten-Interessenten und Nutzer bereitgestellt. Vor diesem Hintergrund wird neben der Vorgehensweise bei der Datenbeschaffung, Aufbau und Administration der Datenbank sowie insbesondere der Datenbestand und der Zugriff auf die Daten beschrieben.
OKSTRA, so heißt der Objektkatalog für das Straßen- und Verkehrswesen. Im Rahmen des Forschungsprojektes "Standardisierung graphischer Daten im Straßen- und Verkehrswesen" werden die Objekte des Straßen- und Verkehrswesens in ihrer Bedeutung, ihrer Struktur und ihren Beziehungen untereinander definiert. Ziel dieses Objektkatalogs ist die Gewährleistung eines standardisierten Datenaustausches sowohl innerhalb von Arbeitsprozessen einer Verwaltung als auch mit externen Institutionen. Die Definitionen der Objekte sind inhaltlich nicht grundlegend neu, vielmehr werden im OKSTRA im wesentlichen die Objekte der vorhandenen Regelwerke und Standards des Straßen- und Verkehrswesens harmonisiert. Zunächst wurde eine Studie erstellt, in der der Datenfluss in einer Straßenbauverwaltung von der Grundlagenermittlung bis zur Bestandsdokumentation analysiert und alle beteiligten Regelwerke und Standards aufgezeigt werden. Weiterhin werden Vorschläge für die Modellierung und Speicherung der Objekte gemacht. Auf der Grundlage dieser Studie werden die Objekte definiert. Der dabei entstehende Objektkatalog OKSTRA bietet erstmalig eine Gesamtübersicht aller Objektbereiche des Straßen- und Verkehrswesens mit ihren Standards und Regelwerken. Im Bericht werden die Notwendigkeit und der Nutzen dieses Standards sowie die Vorgehensweise zu seiner noch laufenden Entwicklung beschrieben.
An approach to the standardization of accident and injury registration systems (STAIRS) in Europe
(1998)
STAIRS is a European Commission funded study whose aim is to produce a set of guidelines for a harmonised, crash injury database. The need to evaluate the effectiveness of the forthcoming European Union front and side impact directives has emphasised the need for real world crash injury data-sets that can be representative of the crash population throughout Europe. STAIRS will provide a methodology to achieve this. The ultimate aim of STAIRS is to produce a set of data collection tools which will aid decision making on vehicle crashworthiness as well as providing a means to evaluate the effectiveness of safety regulations. This paper will disseminate the up-to-date findings of the group as they try to harmonise their methods. The stage has been reached where studies into the diverse methods of the UK, French and German systems of crash injury investigation have been undertaken. An assessment has already been made of the relationships between the three current systems in order to define the areas of agreement and divergence. The conclusions reached stated that there were many areas that are already closely related and that the differences were only at the detailed level. With the emphasis on secondary safety and injury causation, core data sets were decided upon, taking into account: vehicle description, collision configuration, structural response of vehicles, restraint and airbag performance, child restraint performance, Euro NCAP, pedestrian and vehicle occupant kinematics, injury description and causation. Each variable was studied objectively, the important elements isolated and developed into a form that all partners were agreeable on. A glossary of terms is being developed as the project progresses which includes ISO standards and other definitions from the associated CAREPLUS project, which addresses the comparability of national data sets. A major consideration of the group was the data collection method to be employed. The strengths and weaknesses of each study were investigated to obtain a clear idea of which aspects offered the best way forward. The quality of this information and transference into a common format, as well as the necessary error checking systems to be employed have just been completed and are described. In tandem with this area of study the problem of the statistical relationship of each sample to the national population is also being investigated. The study proposes a mechanism to use a sample of crash injury data to represent the national and international crash injury problem
Die Bundesanstalt für Straßenwesen (BASt) wurde vom Bundesministerium für Verkehr, Bau- und Wohnungswesen (BMVBW) mit der Konzeption eines Managementsystems der Erhaltungsplanung für Brücken- und Ingenieurbauwerke des deutschen Fernstraßennetzes beauftragt. Dabei sollte ein System konzipiert werden, welches zum einen den Bund in die Lage versetzt, neben einem Überblick über den aktuellen Zustand der Bauwerke auf Netzebene auch Aussagen zum Finanzbedarf zu erlangen und Strategien, langfristige Ziele sowie Rahmenbedingungen in der Erhaltungspraxis zu verwirklichen. Zum anderen sollten Ländern und Behörden Empfehlungen zur Durchführung von Verbesserungen auf Objektebene geliefert werden, die mit den Strategien, langfristigen Zielen, Rahmenbedingungen und Haushaltszwängen vereinbar sind. In einem ersten Schritt wurden bestehende Bauwerks-Managementsysteme (BMS) analysiert sowie aktuelle Entwicklungstendenzen aufgezeigt. Das aktuelle Vorgehen von Bund und Ländern bei der Erhaltungsplanung wurde im Rahmen einer Länderbefragung im Detail bestimmt. Dabei wurden auch die Zielvorstellungen der Betreiber eines zukünftigen Managementsystems der Bauwerkserhaltung identifiziert. Aufbauend auf diesen Erkenntnissen sowie einer bereits entwickelten Grobkonzeption des BMS wurden die Strukturen des Managementsystems erarbeitet, einzelne Module festgelegt und die Abläufe der Erhaltungsplanung unter Berücksichtigung von Randbedingungen und Zielkriterien erarbeitet. Ein wesentliches Ergebnis neben der Konzeption ist die Erarbeitung eines Stufenplans mit Zeitachse für die Entwicklung des Managementsystems sowie die Formulierung von Teilprojekten zur Fertigstellung des Systems mit Zeitplan. Aufbauend auf diesen Planungen ist die Realisierung eines kompletten BMS für Bund und Länder bis zum Jahr 2005 möglich. Voraussetzung ist jedoch die Bereitstellung ausreichender Finanzmittel beim BMVBW oder der BASt sowie die Bereitstellung aller erforderlichen Daten (ASB, Teilsystem Bauwerksdaten, Verkehrsdaten, Unfalldaten, Netzdaten und so weiter) durch die Länder. Hierbei wäre die Unterstützung des Bundes hilfreich.
Die Bundesanstalt fuer Straßenwesen wurde vom Bundesministerium fuer Verkehr mit der Konzeption eines Managementsystems der Erhaltungsplanung fuer Brücken- und Ingenieurbauwerke des deutschen Fernstraßennetzes beauftragt. Dabei sollte ein System konzipiert werden, welches zum einen den Bund in die Lage versetzt, neben einem Überblick über den aktuellen Zustand der Bauwerke auf Netzebene auch Aussagen zum Finanzbedarf zu erlangen und Strategien, langfristige Ziele sowie Rahmenbedingungen in der Erhaltungspraxis zu verwirklichen. Zum anderen sollten Ländern und Behörden Empfehlungen zur Durchführung von Verbesserungen auf Objektebene geliefert werden, die mit den Strategien, langfristigen Zielen, Rahmenbedingungen und Haushaltszwängen vereinbar sind. In einem ersten Schritt wurden bestehende Bauwerks-Managementsysteme analysiert sowie aktuelle Entwicklungstendenzen aufgezeigt. Das aktuelle Vorgehen von Bund und Ländern bei der Erhaltungsplanung wurde im Rahmen einer Länderbefragung im Detail bestimmt. Dabei wurden auch die Zielvorstellungen der Betreiber eines zukünftigen Managementsystems der Bauwerkserhaltung identifiziert. Aufbauend auf diesen Erkenntnissen sowie einer bereits entwickelten Grobkonzeption des BMS wurden die Strukturen des Managementsystems erarbeitet, einzelne Module festgelegt und die Abläufe der Erhaltungsplanung unter Berücksichtigung von Randbedingungen und Zielkriterien erarbeitet. Ein wesentliches Ergebnis neben der Konzeption ist die Erarbeitung eines Stufenplans mit Zeitachse für die Entwicklung des Managementsystems sowie die Formulierung von Teilprojekten zur Fertigstellung des Systems mit Zeitplan. Aufbauend auf diesen Planungen ist die Realisierung eines kompletten BMS für Bund und Länder bis zum Jahr 2005 möglich. Stufe 0: Ausgangsbasis, Grundlagen für einen Verteilungsschlüssel für Finanzmittel des Bundes, sofort möglich. - Stufe 1: Grundlage für netzweite Bewertungen und Analysen auf Länder- und Bundesebene, ab 2000 - Stufe 2: Grundlage für die Dringlichkeitsreihung und die Bewertung von Maßnahmevarianten, ab 2001 - Stufe 3: Grundlage für die Bedarfsermittlung und die Finanzplanung, ab 2003 - Stufe 4: Programmplanung mit Restriktionen, Verknüpfung von Managementsystemen, ab 2005. Voraussetzung ist jedoch die Bereitstellung ausreichender Finanzmittel beim BMVBW oder der BASt sowie die Bereitstellung aller erforderlicher Daten (ASB, Teilsystem Bauwerksdaten, Verkehrsdaten, Unfalldaten, Netzdaten usw.) durch die Länder. Hierbei wäre die Unterstützung des Bundes hilfreich.
OKSTRA ist ein Objektkatalog für das Straßen- und Verkehrswesen und eine Grundlage für die Geschäftsprozesse. Nach Zeiten der Investition für die Entwicklung trägt der OKSTRA mittlerweile Früchte. Diverse OKSTRA-konforme Softwareprodukte sind am Markt erhältlich. Beim 2. OKSTRA-Symposium der FGSV am 27./28. Mai 2003 in Münster wurden die neuesten Entwicklungen präsentiert.
OKSTRA ist ein Objektkatalog für das Straßen- und Verkehrswesen und eine Grundlage für die Geschäftsprozesse. Nach Zeiten der Investition für die Entwicklung trägt der OKSTRA mittlerweile Früchte. Diverse OKSTRA-konforme Softwareprodukte sind am Markt erhältlich. Beim 2. OKSTRA-Symposium der FGSV am 27./28. Mai 2003 in Münster wurden die neuesten Entwicklungen präsentiert.
Das Projekt Deutsche Datenbank Rettungsdienst beinhaltet die Entwicklung und Erprobung eines bundeseinheitlichen Referenzdatensatzes für den Rettungsdienst, dessen Basis die medizinisch logistische Verlaufsdokumentation rettungsdienstlicher Einsätze mittels DIVI-Protokollen bzw. alternativer Dokumentationsprotokolle darstellt. Im Anschluss an die Entwicklung eines Referenzdatensatzes für den Rettungsdienst wurden insgesamt 9.689 Einsatzprotokolle im Rahmen einer repräsentativen bundesweiten Stichprobe erfasst. Diese wurden hinsichtlich logistischer wie auch medizinischer Parameter ausgewertet. Führende Diagnosen im Einsatzspektrum waren akute Erkrankungen, insbesondere des Herzkreislaufsystems, des Zentralnervensystems und der Atmungsorgane. Unter den dokumentierten Verletzungen hatten Schädel-Traumata (ohne Berücksichtigung des Schweregrads) und Extremitätenverletzungen den größten Anteil. Analysen der Versorgungsqualität gemäß nationaler Leitlinien zeigten bei der notärztlichen Versorgung von Patienten mit akutem Koronarsyndrom überwiegend gute, bei der Versorgung vom schwer Schädel-Hirn-Verletzten unzureichende Befolgung der Therapie-Empfehlungen. Bei nicht-notärztlich versorgten Patienten werden in nennenswertem Umfang die Gabe von Infusionen und Medikamenten ohne Beteiligung eines Notarztes dokumentiert. Im Rahmen der Datenauswertung traten verschiedene Defizite hinsichtlich der Dokumentation rettungsdienstlicher Einsätze in Deutschland zu Tage, die sich überwiegend durch das Problem fehlender Angaben kennzeichnen ließen. Die Dokumentation von Rettungseinsätzen stellt demnach keineswegs eine Idealsituation dar, wie es die aktuelle Datenlage zeigt. Die Ergebnisse untermauern die Notwendigkeit eines bundeseinheitlichen Einsatzprotokolls zur Erfassung von Notfalleinsätzen mit und ohne Notarztbeteiligung, bei dem die Erkenntnisse aus diesem Forschungsprojekt eingebunden werden.
Data concerning accidents involving personal injury which have been collected in the context of in-depth investigations on scene in the Hannover area since 1973 and in the Dresden area since 1999 represent an important basis for empirical traffic safety research. At national and international level various analyses and comparisons are carried out on the basis of "in-depth data" from the above mentioned investigations. In-depth data play a decisive role e.g. within the validation of EuroNCAP results on secondary safety (crashworthiness) of individual passenger car models. Thus, statistically sound methods of data analysis and population parameter estimation are of high importance. Since the 1st of August 1984 the "in-depth investigations on scene" in the Hannover area have been carried out according to a sampling plan developed by HAUTZINGER in the context of a research project on behalf of BASt. In the meantime a second region of in-depth investigation on scene was added with surveys in Dresden and the surrounding area. Internationally, the acronym GIDAS (German In-Depth Accident Study) is commonly used for the two above mentioned surveys. The objective of a current research project (topic of this contribution) is, among other things, to examine and adjust the previous weighting and expansion method for the two regional accident investigations to the current general conditions.
In recent years considerable progress in active and passive safety of road vehicles has been made. The road traffic of today is much safer than in the past. A current vehicle has a lot more safety elements resulting in an improved inner and outer technique. In most European countries the number of fatalities is decreasing despite growing traffic and road usage. Nevertheless, the number of casualties in road traffic accidents is high enough, thus more progress is needed if the number of fatalities is to be reduced by 50%, as postulated by the European Commission for the year 2010. In order to develop countermeasures and further possibilities for injury prevention, it is increasingly important to have accident data available, supplying results quickly and giving the best overview across Europe. In-Depth-Data Sampling Procedures have a huge historical development, starting in the 60ies by the car manufactures, continued during the 70ies mostly by some universities mainly in England, Sweden, France and Germany, today a net of in-depth-investigation teams are working across Europe and around the world.One of the oldest teams is located at the Hannover Medical School, founded in 1973 by the German Government on behalf of the Federal Highway Research Institute Bast. It was the only team worldwide that was equipped with blue light emergency cars, working on scene in time so directly after the event and working continuously during the years, collecting 20 thousand accidents within 30 years period. Since 1999 the order is carried out in cooperation with the German car industry, which is interested and has benefit on the data too. On the basis of the new data collection, so called GIDAS (German In-Depth Accident Study), that has been run at the Technical University Dresden and the Medical University Hannover), a special tool for In-Depth-Accident Analysis was founded. It is the task of this conference to build a platform for such research based on In-Depth-Investigation. The conference is specially aimed at the area of accident data analysis in order to contribute to the harmonization of different investigation methods and accumulation of different results that does exist for different countries worldwide. Up to now no special conference did exist to deal with accident data only following in the discussion for an improvement in traffic and vehicle safety. ESAR - expert symposium on accident research - should be a step forward. This first international conference is being organized by the Accident Research Unit at the Medical University Hannover jointly with the German Federal Highway Research Institute Bast and the Research Association of German Car Manufacturers FAT. The conference should be a platform for an interdisciplinary exchange of information based on the different presentations from participants around the world.
In den Technischen Lieferbedingungen für Streckenstationen (TLS), Ausgabe 2002, sind die Anforderungen an Verkehrserfassungsgeräte festgelegt, die auf Bundesfernstraßen in Verkehrsbeeinflussungsanlagen und für die Verkehrsstatistik eingesetzt werden. Je nach Anwendungsgebiet muss das Verkehrserfassungsgerät mit hinreichender Genauigkeit in der Lage sein, die Fahrzeuge in 2, 5+1 oder 8+1 Klassen zu unterscheiden sowie die Fahrzeugmengen und Fahrzeuggeschwindigkeiten zu erfassen. Um die Qualität der Verkehrsdatenerfassung zu sichern, ist in den TLS für die Geräte eine Eignungsprüfung vorgeschrieben. Verkehrserfassungsgeräte, die auf Bundesfernstraßen eingesetzt werden sollen, müssen diese Typprüfung bestehen. Die Prüfmessungen erfolgen im Prüffeld der BASt auf der Bundesautobahn A 4 bei km 92,4 in Fahrtrichtung Köln.
An die Lichtsignalsteuerung richten sich hohe Qualitätsanforderungen, da ihr für einen sicheren und flüssigen Verkehrsablauf im Straßennetz eine wichtige Rolle zukommt. Um eine hohe Qualität der Lichtsignalsteuerung auch im wachsenden Altbestand von Anlagen zu gewährleisten, liegt es nahe, eine regelmäßige, systematische Überprüfung vorzunehmen, um Mängel frühzeitig erkennen und beheben zu können. Ziel des Forschungsvorhabens war es, eine aufwandsoptimierte Verfahrensweise und die notwendigen Hilfsmittel für ein systematisches Qualitätsmanagement für Lichtsignalanlagen (LSA) zu entwickeln. Hierzu wurde zunächst die Lichtsignalsteuerung als Gegenstand des Qualitätsmanagements eingehend erörtert. Auf dieser Grundlage wurden Verfahrensweisen und EDV-gestützte Hilfsmittel entwickelt, mit denen die Güte des Verkehrsablaufs und die Verkehrssicherheit im Straßennetz und an einzelnen Knotenpunkten mit geringem Aufwand überprüft werden kann. Zur Qualitätsbewertung werden Unfalldaten, Prozessdaten und Betriebsdaten analysiert sowie der Verkehrsablauf vor Ort beobachtet. Der Aufbau einer Wissensbasis diente dazu, den Kenntnisstand zu Möglichkeiten der Qualitätsverbesserung an Lichtsignalanlagen für die Anwendung verfügbar zu machen. Hierin sind typische Qualitätsmaengel an Lichtsignalanlagen mit Möglichkeiten der Abhilfe verknüpft. Ferner sind Prüfbedingungen der Eignung und Umsetzbarkeit der Maßnahmen hinterlegt. Mit Hilfe dieses Expertensystems können Maßnahmen identifiziert und bewertet werden. Die Anwendung des Verfahrens an verschiedenen Knotenpunkten zeigt, dass der systematische und modulare Aufbau gut geeignet ist, aussagekräftige Informationen zur Qualität der Lichtsignalsteuerung zu erlangen und geeignete Maßnahmen zur Qualitätsverbesserung zu identifizieren. Das Verfahren kann mit geringem Aufwand durchgeführt werden und kann daher einen Beitrag für die verbreitete Anwendung des Qualitätsmanagements für Lichtsignalanlagen leisten.
The need for improved EU level accident information and data was identified in the EU White Paper on Transport Policy (2001)1 and detailed in the Road Safety Action Plan (2003)2. The plan specifies that the EC will develop a road safety observatory to coordinate data collection within an integrated framework.
This study is aimed to investigate the correlations of impact conditions and dynamic responses with the injuries and injury severity of child pedestrians by accident reconstruction. For this purpose, the pedestrian accident cases were selected from Sweden and Germany with detailed information about injuries, accident cars, and accident environment. The selected accident cases were reconstructed using mathematical models of pedestrian and passenger car. The pedestrian models were generated based on the height, weight, and age of the pedestrian involved in accidents. The car models were built up based on the corresponding accident car. The impact speeds in simulations were defined based on the reported data. The calculated physical quantities were analyzed to find the correlation with injury outcomes registered in the accident database. The reconstruction approaches are discussed in terms of data collection, estimating vehicle impact speeds, pedestrian moving speeds and initial posture, secondary ground impact, validity of the mathematical models, as well as impact biomechanics.
Road safety is a major preoccupation of the European Commission and the road transport industry and depends on numerous significant factors. In order to improve road safety and to plan effective safety improvement actions for truck transport, we must first identify the problems to be addressed, i.e. what are the main causes of truck accidents. The ETAC project, initiated by the European Commission and the IRU, was launched in order to set up a heavy goods vehicle accident causation study across European countries to identify future actions which could contribute to the improvement of road safety. The results will be based on a detailed analysis of truck accident data collected in seven European countries according to a common methodology which has been elaborated through numerous national and European projects. This paper describes the common methodology used to collect the information on the scene of the accident and to analyse the data so that the reconstruction of the crash events may be carried out. CEESAR proposes a methodology using its experience gained from over 10 years of accident data collection. This methodology is based on an in-depth investigation of the parameters involved in-an accident and linked to the driver, the vehicle, the road and their environment. In-depth investigation requires accident investigator presence on the scene of the accident in order to collect volatile information such as marks on the road, weather conditions, visibility, state and equipment of the vehicle, driver interview. Later, passive and active information is gathered, either at the hospital for the driver, at the garage for the vehicle or on the spot for the road geometry. A reconstruction carried out with the help of specific software and the analysis of the data collected and calculated enables the identification of the main causes of the accident and the future actions to plan in order to improve road safety as regards truck traffic.
Ziel dieses Forschungsvorhabens war es, das bisherige Gewichtungs- und Hochrechnungsverfahren für die örtlichen Unfallerhebungen in den Regionen Hannover und Dresden zu überprüfen und an die aktuellen Rahmenbedingungen anzupassen. Darüber hinaus sollten neue Möglichkeiten der gemeinsamen Hochrechnung von Ergebnissen aus beiden Erhebungsgebieten unter Berücksichtigung der aktuellen Datenlage, insbesondere in der amtlichen Unfallstatistik, untersucht und entsprechende statistische Verfahren entwickelt werden. Der Stichprobenplan der Erhebungen folgt einem zweistufigen Stichprobenverfahren. Tests mit einem zweistufigen Hochrechnungsverfahren der Hannover-Stichproben 2000 und 2001 auf die Gesamtheit Hannover haben jedoch ergeben, dass die theoretisch zu erwartenden Vorteile dieser zweistufigen Methode im Vergleich zur "einfachen Gewichtung" in der Praxis relativ gering sind. Unter Beibehaltung der bisherigen Gewichtungsprozedur (Anpassung an eine n-dimensionale Kontingenztabelle) wurden daher für die regionalen Hochrechnungen Dresden und Hannover alternative Methoden entwickelt, in der z.B. das Merkmal Ortslage durch die Unfallart ersetzt oder zusätzlich die Anzahl Unfallbeteiligter zur Gewichtung herangezogen wird. Leider erbringen diese Verfahren im Vergleich zur bisherigen (simultanen) Gewichtung nach Unfallschwere, Tageszeit und Ortslage nur wenige oder gar keine Verbesserungen der Anpassungsgenauigkeit bei Merkmalen der amtlichen Statistik, die nicht in die Gewichtung eingehen. Unabhängig vom Gewichtungsverfahren lässt die Abbildungsgenauigkeit bei einzelnen Variablen sehr zu wünschen übrig. Auf der Basis der Stichprobendaten 2000 wurde ferner noch ein Gewichtungsverfahren für Hochrechnungen auf das Bundesgebiet entwickelt und anhand der beiden Einzelstichproben sowie der gepoolten Stichprobe (Dresden plus Hannover) getestet. Die gepoolten Stichprobe zeigte die besten Ergebnisse. Allerdings ließen sich auch auf der Grundlage der gepoolten Daten nicht bei allen Merkmalen (gemeint sind hier Merkmale, die nicht Gewichtungsmerkmale sind) Verbesserungen des Fits erzielen. Es bleiben relativ große Abweichungen zwischen der gewichteten gepoolten Stichprobe und den bundesdeutschen Verteilungen. Es ist zu erwarten, dass auch bei vielen GIDAS Merkmale durch die Gewichtung keine essentielle Korrektur der Stichprobenverzerrungen erzielt werden kann. Insgesamt hat sich gezeigt, dass es auch mit alternativen, meist hierarchischen Gewichtungsverfahren nicht möglich ist, alle Merkmale, deren Verteilungen aus der amtlichen Statistik bekannt sind, mit hinreichender Genauigkeit an die Verhältnisse der Grundgesamtheit anzupassen. Es ist zu erwarten, dass sich dies bei den eigentlich hochzurechnenden originären GIDAS-Variablen ähnlich darstellt. Somit muss der Ansatz eines einheitlichen Verfahrens für alle Jahre und beide Erhebungsgebiete in Frage gestellt werden. Für besonders wichtige Fragestellungen sollte daher eine spezielle, auf das jeweilige Untersuchungsmerkmal abgestellte Gewichtung durchgeführt werden, wie dies exemplarisch am Beispiel der maximalen Kollisionsgeschwindigkeit gezeigt wurde. Schließlich werden im Bericht noch Empfehlungen zur Datenqualität und zu der Frage gegeben, wie sich das derzeit praktizierte Stichprobenverfahren im Hinblick auf die Gewinnung einer repräsentativen Stichprobe möglicherweise verbessern lässt.
Mit Hilfe der Datenbestände von 7 Städten werden die Grundlagen für eine praxisgerechte Weiterentwicklung des Bewertungsverfahrens für den messtechnisch erfassten Zustand von Innerortsstraßen mit den erforderlichen Normierungsfunktionen, den Ziel-, Warn- und Schwellenwerten und maßgeblichen Funktionsklassen erarbeitet. Für die Auswerteabschnitte ergab sich eine Länge von 10 m als sinnvoll, aus der problemlos Zustandsindikatoren auch für längere Abschnitte ermittelt werden können. Die bisher verwendeten Zustandsindikatoren für die Längsebenheit, Querebenheit und Substanz werden auf ihre Brauchbarkeit untersucht und verbesserte beziehungsweise neue Indikatoren mit den dazugehörigen Normierungsfunktionen vorgeschlagen. Für die Griffigkeit standen keine Analysedaten zur Verfügung. Hier konnte für die Festlegung von Ziel-, Warn- und Schwellenwerten auf entsprechende Normierungsfunktionen für Außerortsstraßen zurückgegriffen werden. Weiterhin werden Vorschläge für die Verknüpfung zum Gebrauchs-und Substanzwert erarbeitet. Für die Relativierung der Anforderungen an den Zustand von Asphaltfahrbahnen werden zwei Funktionsklassen für die Straßenkategorien "Hauptverkehrs-/verkehrs-/Sammelstraßen" (FK 1) und "Anlieger-/Wohnstraßen" (FK 2) vorgeschlagen. Weiterhin wird eine dritte Funktionsklasse für Pflasterstraßen eingeführt. Ihre unterschiedlichen Normierungsfunktionen gewährleisten bei gleichen Zustandsausprägungen eine unterschiedliche Einstufung der Dringlichkeit von Maßnahmearten. Die Untersuchungsergebnisse sind zusätzlich in Form eines Arbeitspapiers aufbereitet.
The second ESAR Conference took place at the Medical University Hannover. This year conference presents the current state of affairs of relevant research activities in the field of in-depth investigations. The first conference on ESAR (Expert Symposium on Accident Research) was established in 2004. It is planned to hold ESAR every two years. Hannover seems to be the right place for this conference concerning the fact that the first in-depth research team was found here in the year 1973 and comprehensive studies on accident analysis were spread out from here around the world continuously. This year conference topped all expectations in terms of the numbers of participants, in the variety of papers and the interdisciplinary of presenters from medical, psychological and engineering background. More than 100 delegates from all over the world, that means 13 different countries and from 4 different continents, came to Hannover, presented their results of accident investigation and discussed countermeasures for accident prevention and injury reduction. ESAR should be a platform for exchange of knowledge to find an optimized way for increase of traffic and vehicle safety by in-depth investigation and methodology. ESAR as international conference should be a platform for consideration of all nations round the world. This seems to be very important for the current situation, having high safety in the high industrial countries of Europe, US and Australia, but low safety and high injury risk in Asia and Africa.
Empirical vehicle crashworthiness studies are usually based on national or in-depth traffic accident surveys: Data on accident-involved cars/drivers are analysed in order to quantify the chance of driver injury and to assess certain risk factors like car make and model. As the cars/drivers involved in the same accident form a "cluster", where the size of the cluster equals the number of accident-involved parties, traffic accident survey data are typical multi-level data with accidents as first-level or primary and cars/drivers as secondlevel or secondary units (car occupants in general are to be considered as third level units). Consequently, appropriate statistical multi-level models are to be used for driver injury risk estimation purposes as these models properly account for the cluster structure of traffic accident survey data. In recent years various types of regression models for clustered data have been developed in the statistical sciences. This paper presents multi-level statistical models, which are generally applicable for vehicle crashworthiness assessment in the sense that data on single and multiple car crashes can be analysed simultaneously. As a special case of multi-level modelling driver injury risk estimation based on paired-by-collision car/driver data is considered. It is demonstrated that assessment results may be seriously biased, if the cluster structure inherent in traffic accident survey data is erroneously ignored in the data analysis stage.
In the context of this study, different data sources for accident research were examined regarding their possible data access and evaluated concerning the individual quality and extent of the data. Analyses of accidents require detailed and comprehensive information in particular concerning vehicle damages, injury patterns and descriptions of the accident sequence. The police documentation supplies the basic accident statistics and is amended in the context of the forensic treatment by further information, e.g. by medical and technical appraisals and witness questionings. As a new approach to the data acquisition for the analysis of fatal traffic accidents, the information was made usable which was collected by the police and by the investigations of the public prosecutor. The best strategy for obtaining reliable, extensive and complete data consists of combining the information from these two sources: the very complete, but elementary statistic data of the Niedersächsisches Landesamt für Statistik (Lower Saxony State Authority of Statistics), based on the police documentation as well as the very extensive accident information resulting from the investigation documentation of the public prosecutor after conclusion of the procedure, the so-called Court Records. Of all 715 fatal traffic accidents, which happened in the year 2003 in the German State of Lower Saxony, 238 cases were selected by means of a statistically coincidental selective procedure based on a statistically representative manner (every third accident). These cases cover the investigation documents of the 11 responsible public prosecutor- offices, which were requested and evaluated while preserving the data security. Of the 238 cases 202 cases were available, which were individually coded and stored in a data base using 160 variables. Thus a data base of a sample of representative data for fatal accidents in Lower Saxony was set up. The data base contains extensive information concerning general accident data (35 variables), concerning road and road surface data (30 variables), concerning vehicle-specific data (68 variables) as well as concerning personal and injury data (27 variables).
Die Qualität der Beeinflussung und der Information des Verkehrsteilnehmers ist in hohem Maße abhängig von der Qualität der erhobenen Verkehrsdaten. Aus diesem Grunde stellt sich die Frage: welche Qualitätsanforderungen sind an die Verkehrsdatenerfassung zu stellen und wie wird sichergestellt, dass die Qualitätsanforderungen auch im laufenden Betrieb über Jahre hinweg eingehalten werden? In einem Arbeitskreis der FGSV wurden Hinweise zur Qualitätsanforderung und Qualitätssicherung der lokalen Verkehrsdatenerfassung für Verkehrsbeeinflussungsanlagen entwickelt. Das hier vorgestellte Hinweispapier, das von der FGSV veröffentlicht wurde, soll die Betreiber von Verkehrsbeeinflussungsanlagen dabei unterstützen, die Qualitätsanforderung an die lokale Verkehrsdatenerfassung zu erfüllen und im laufenden Betrieb dauerhaft sicherzustellen.
In Finland all fatal motor vehicle accidents are studied in-depth on-the-spot by multidisciplinary (police, road and vehicle engineers, physician and behavioural scientist) road accident investigation teams (legislation 2001, work started 1968), which operate in every province. The purpose of the teams is to uncover risk factors that turned an ordinary driving situation into a serious accident and give safety recommendations for improving road safety. The investigation teams do not take a stand on guilt or insurance compensation. When analysing accidents the teams use the concepts of key event, immediate, background and injury risk factors. Compiled investigation folders of each case contain investigation forms from each member, preinvestigation protocol, photographs, sketches etc. About 500 items of information are collected from each accident party. The collected information is also coded into a computer database. Both the database and the investigation folders are widely utilized by researchers and authorities conducting safety work.
Annually within the European Union, there are over 50,000 road accident fatalities and 2 million other casualties, of which the majority are either the occupants of cars or other road users in collision with a car. The European Commission now has competency for vehicle-based injury countermeasures through the Whole Vehicle Type Approval system. As a result, the Commission has recognised that casualty reduction strategies must be based on a full understanding of the real-world need under European conditions and that the effectiveness of vehicle countermeasures must be properly evaluated. The PENDANT study commenced in January 2003 in order to explore the possibility of developing a co-ordinated set of targeted, in-depth crash data resources to support European Union vehicle and road safety policy. Three main work activity areas (Work Packages) commenced to provide these resources. This paper describes some of the outcomes of Work Package 2 (WP2, In-depth Crash Investigations and Data Analysis). In WP2, some 1,100 investigations of crashes involving injured car occupants were conducted in eight EU countries to a common protocol based on that developed in the STAIRS programme. This paper describes the purposes, methodology and results of WP2. It is expected that the results will be used as a co-ordinated system to inform European vehicle safety policy in a systematic, integrated manner. Furthermore, the results of the data analyses will be exploited further to provide new directions to develop injury countermeasures and regulations.
76 severe traffic accidents had been investigated in depth in an ongoing Volkswagen-Tongji University joint accident research project in JiaDing district, Shanghai, PR China since June 2005. With a methodology similar to German accident research units in Dresden and Hannover, a research team proceeds to the scene immediately after the incident to investigate and collect various data on environment, accident occurrence, vehicle state and deformations as well as injuries. The data combined with the results of accident reconstruction will be stored in a database for further statistical and casuistic analysis. The first outcome of the project supports the hypothesis that a main causation for the large number of traffic accidents in China is the lacking of risk awareness in Chinese driver behaviour. Low seat-belt use and the high proportion of vulnerable and poorly protected two-wheelers in traffic are reasons for the high injury and fatality rate in China. The research work shows that accident research in China is feasible and able to give support to tackle one of the urging problems in Chinese development.
Internationally, the need is expressed for harmonized traffic accident data collection (PSN, PENDANT, etc.). Together with this effort of harmonization, traffic accident investigation moves more and more in the direction of accident causation. As current methods only partly address these needs, a new method was set up. The main characteristics of this method are: • Accident/injury causation (associated) factors can objectively be identified and quantified, by comparison with exposure information from a normal population. • All relevant accident and exposure data can be included: human-, vehicle-, and environmental related data for the pre-crash, crash and postcrash situation (the so-called Haddon matrix). The level of detail can be chosen depending on interest and/or budget, which makes the method very flexible. In this paper the accident collection and control group method are presented, including some of the achieved results from a pilot study on 30 truck accidents and 30 control locations. The data were analyzed by using cross-tabulations and classification-tree analysis. The method proved useful for the identification of statistically significant causational aspects.
The "Seven Steps Method" is an analysis and classification system, which describes the human participation factors and their causes in the temporal sequence (from the perceptibility to concrete action errors) taking into consideration the logical sequence of individual basic functions. By means of the "seven steps" it is possible to describe the relevant human causes of accidents from persons involved in the accident in an economic way with a sufficient degree of exactitude, because the causes can be further differentiated in their value (e.g. diversion as external diversion with regard to impact due to surroundings) and their sub values (e.g. external diversion with regard to impact due to surroundings in the shape of a "capture" of the perception by a prominent object of the traffic environment). Theoretically it is possible that one or more causing moments can be assigned to a person involved in an accident in each of the "seven steps"; however it is also possible to sufficiently clarify the cause in only one level (examples for this are described). In the practice of accident investigation at the site of the accident, the sequence chart is also relevant. With its assistance the questioning of the people involved in an accident can be accomplished in a structured way by assigning a set of questions to each step.
In recent years special attention has been paid to reducing the number of fatalities resulting from road traffic accidents. The ambitious target to cut in half the number of road users who are killed each year by 2010 compared with the 2001 figures, as set out in the European White Paper "European Transport Policy for 2010: Time to Decide" implies a general approach covering all kinds of road users. Much has been achieved, e.g. in relation to the safety of car passengers and pedestrians but PTW accidents still represent a significant proportion of fatal road accidents. More than 6,000 motorcyclists die annually on European roads which amounts to 16% of the EU-15 road fatalities. The European Commission therefore launched in 2004 a Sub- Project dealing with motorcycle accidents within an Integrated Project called APROSYS (Advanced PROtection SYStems) forming part of the 6th Framework Programme. In a first step, the combined national statistical data collections of Germany, Italy, the Netherlands and Spain were analysed. Amongst other things parameters like accident location, road conditions, road alignment and injury severity have been explored. The main focus of the analysis was on serious and fatal motorcycle accidents and the results showed similar trends in all four countries. From these results 7 accident scenarios were selected for further investigation via such in-depth databases as the DEKRA database, the GIDAS 2002 database, the COST 327 database and the Dutch element of the MAIDS database. Three tasks, namely the study of PTW collisions with passenger cars, PTW accidents involving road infrastructure features, and motorcyclist protective devices have been assessed and these will concentrate inter alia on accident causes, rider kinematics and injury patterns. A detailed literature review together with the findings of the in-depths database analysis is presented in the paper. Conclusions are drawn and the further stages of the project are highlighted.
In Germany, in-depth accident investigations are carried out in the Hannover area since 1973. In 1999 a second region was added with surveys in Dresden and the surrounding area. Internationally, the acronym GIDAS (German In-Depth Accident Study) is commonly used for these surveys. Compared to many other countries, the sample sizes of the GIDAS surveys are much larger. The goal is to collect 1.000 accidents involving personal injuries per year and region. Data collection takes place by using a sampling procedure, which can be interpreted as a two-stage process with time intervals as primary units and accidents as secondary units. An important question is, to what extend these samples are representative for the target population from which they are drawn. Analyses show, for example, that accidents with persons killed or seriously injured are overrepresented in the samples compared to accidents with slightly injured persons. This means, that these data are subject to biases due to uncontrolled variation of sample inclusion probability. Therefore, appropriate weighting and expansion methods have to be applied in order to adjust or correct for these biases. The contribution describes the statistical and methodological principles underlying the GIDAS surveys with respect to sampling procedure, data collection and expansion. In addition, some suggestions regarding potential improvements of study design are made from a methodological point of view.
During the last 5 years, the number of cars fitted with side airbags has dramatically increased. They are now standard equipment, even on many smaller cars or less luxurious vehicles. While some side airbags offer thoracic protection alone, there are those that combine thoracic and head protection (of which most deploy from the seat). Other systems employ separate airbags for head and thorax protection, which are designed to be effective noticeably in a crash against a pole. This paper proposes an evaluation of the effectiveness of side airbags in preventing thoracic injuries to passenger car occupants involved in side crashes. First, the target population (who can take benefit of side airbag deployment and in what circumstances) is defined. Side airbags can be especially effective in cases of impacts on the door with intrusion at a certain impact speed. Then, an example case of a side impact with side airbag deployment is given were side airbag deployment is thought to have had a positive effect on injury outcome. A further case is presented where the impact configuration is likely to have reduced the effect of side airbag deployment on injury outcome. Finally, the estimation of side airbag effectiveness (in terms of additional occupant protection brought exclusively by the airbag) is proposed by comparing injury risk sustained by occupants in (more or less) similar cars (fitted or non fitted with airbags) because, during these years, car structure, and side airbag conception have considerably evolved. In-depth accident data from France, the UK and Germany has been collected. Out of 2,035 side impact accident cases available in the databases, we selected 435 occupants of passenger cars (built from 1998 onwards) involved in an injury accident between year 1998 and year 2004 for EES (Energy Equivalent Speed) values between 20km/h and 50km/h. The occupants, belted or not, were sat on the struck side, whatever the obstacle and type of accidents (intersection, loss of control, etc.). For multiple impact crashes, the side impact is assumed to be the more severe one. Passenger cars were fitted with (96) or without (339) side airbags. Most of the potential risk explanatory variables were correctly and reliably reported in the databases (velocity " impact zone " impact angle " occupant characteristics, etc.). The analysis compared injury risks for different levels of EES and different types of side airbags. A logistic regression model was also computed with injury variables (such as thoracic AIS 2+ or AIS 3+) as the dependant variable and other variables (including airbag type and EES) as explanatory injury risk factors. Results revealed statistically non-significant reductions in thoracic AIS 2+ and AIS 3+ injury risk in side airbag equipped cars in the impact violence range selected (odds ratio between 0.84 and 0.98 depending on types of airbags). The results are discussed. The non-significance is assumed to be due to a low number of cases. Statistical analysis for head injuries was not possible due to the low number of accident cases with passenger cars fitted with head airbags in the databases. Moreover, the discrepancies between the data coming from different countries (especially calculation of EES) might have introduced instability in the analysis.
The accident research project in Dresden was founded in July 1999. To date over 6.000 crash investigations have been undertaken. About 10.000 vehicles have been documented and over 13.000 participants have been debriefed. But there is much more than this scientific success. Because of the interdisciplinary character between the medical and technical focus, the project affords an important contribution for the education of the involved students. Over 200 students of different fields of study have got experiences not only for the occupational career. This lecture describes the additional effects of the accident research project regarding the education of the students, the capacity for teamwork and learning about dealing with accident casualties.
NASS: the glass is half full
(2007)
The National Accident Sampling System (NASS) was born in the late 1970s. It was based on a substantial amount of experience and analysis of what was needed in the United States to understand the safety challenges of our highways. This work also showed how to collect high quality and useful crash data efficiently. Unfortunately, when Ronald Reagan - a President who believed in limited government - was elected, any hope of full funding for NASS was lost. The concept of 75 teams investigating about 18,000 serious crashes in detail annually was never realized. The system got up to 50 teams, then was cut to 36, and finally to 24 teams investigating fewer than a quarter of the originally anticipated number of crashes per year. Despite this, the NASS investigations provide a rich source of data, collected according to a sophisticated statistical sampling system to facilitate detailed national estimates of road casualties on our nation- highways and their causes. In addition, changes have been made in recent years to increase the number of more serious crashes of recent model vehicles to make the results more relevant to improving vehicle safety. A recent, detailed examination of hundreds of rollovers has provided considerable insight into rollover casualties and into what can be done to reduce them. Some of these results will be presented that show the value of the NASS system. Our experience with NASS and the Fatal Accident Reporting System (FARS) suggests a number of improvements that could be made in the United States" crash data systems. It also provides justification for a doubling or tripling of our national expenditures on crash data collection.
Due to recent years accident avoidance and crashworthiness on Austrian roads were mostly developed on national statistics and on-scene investigation respectively. Identification and elimination of black spots were main targets. In fact many fatal accidents do not occur on such black spots and black-spot investigation has reached a limit. New methods are required and therefore the Austrian Road Safety Programme was introduced by the Austrian Ministry of Transport, Innovation and Technology. The primary objective is the reduction of fatalities and severe injuries. Graz University of Technology initiated the project ZEDATU (Zentrale Datenbank tödlicher Unfälle) with the goal to identify similarities in different accident configurations. A matrix was established which categorizes risk and key factors of participating parties. Based on this information countermeasures were worked out.
Das FE-Projekt verfolgt das Ziel, Erhebungsverfahren zur Bestimmung des Befolgungsgrades von Alternativroutenempfehlungen an Netzbeeinflussungsanlagen (NBA) vorzuschlagen. Dazu wurde - nach der Ermittlung relevanter Faktoren auf das individuelle Entscheidungsverhalten - das Spektrum bekannter Methoden und Verfahren systematisch analysiert, und daraus schlüssige und handhabbare Empfehlungen für eine praktische Umsetzung abgeleitet. Wesentliche Untersuchungsergebnisse sind: Neben den Anzeigen auf Schildern einer NBA haben folgende Faktoren starken Einfluss auf die Entscheidung zur Befolgung einer Empfehlung: die Struktur des zulaufenden Verkehrsstromes (z.B. Quellen und Ziele der Fahrten, Fahrtzwecke), die Informationslage (Informationen aus Verkehrsfunk, Navigationssystem, eigener Beobachtung), die Umfeldsituation (z.B. Wetter und Sicht, die Qualität des Verkehrsflusses im Vorfeld der NBA sowie am Entscheidungspunkt) sowie Merkmale der Kfz-Nutzer (z.B. Ortskenntnis, Präferenzen/Motive). Die Heterogenität der individuellen, situativen und verkehrlichen Einflüsse im Umfeld jeder einzelnen NBA sowie starke zufällige Schwankungen der Zusammensetzung des zu beeinflussenden Verkehrsstromes erschweren die Bestimmung des Befolgungsgrades mit einem allgemein gültigen und auf unterschiedliche Anlagen übertragbaren Verfahren. Die Untersuchung von Verfahren der Beobachtung und Befragung ergab hohe zu erwartende Aufwendungen für die Erhebungsdurchführung bei gleichzeitig begrenzter Verbesserung erzielbarer Ergebnisse. Eine pragmatische Möglichkeit zur Ermittlung von Befolgungsgraden ist die Auswertung von Verkehrsdaten (Fahrzeugmengen), die in einem engen Zeitraum von höchstens 15 Minuten vor und nach Einschalten einer Empfehlung an Ein- und Ausfahrten eines beeinflussten Knotenpunkts erfasst werden. Die Übertragbarkeit der auf diese Weise ermittelten Werte auf andere Anlagen ist jedoch nur unter Berücksichtigung definierter Vergleichskriterien möglich. Die tatsächliche Wirksamkeit von Beeinflussungsanlagen kann bei Anwendung statistischer Testverfahren durch kurzzeitige Versuchsschaltungen nachgewiesen werden. Zur Bestimmung der Befolgungsgrade von NBA wird empfohlen, Stated-Response-Methoden (Messung individueller Präferenzen) anzuwenden. Diese Methode bietet den zusätzlichen Nutzen der Berücksichtigung von Effekten relevanter Einflussfaktoren bei der Interpretation festgestellter Befolgungsgrade.
Der Vergleich der Ergebnisse aus drei von der Bundesanstalt für Straßenwesen (BASt) durchgeführten Studien ergab, dass keiner der bisher gewählten Ansätze optimal erscheint, um als Grundlage für eine langfristige Untersuchungsreihe zu schwerstverletzten Unfallopfern zu dienen. Dagegen verspricht die Verknüpfung der Daten des Traumaregisters der Deutschen Gesellschaft für Unfallchirurgie mit polizeilichen Unfalldaten einen Fortschritt. Somit könnten die Primärdaten zweier bereits etablierter Dokumentationssysteme für die künftige Untersuchung der Schwer(st)verletztenproblematik effizient genutzt werden. Zu einem ähnlichen Ergebnis kommt eine aktuelle Studie der Rheinisch-Westfälischen Hochschule Aachen und der Universitätsklinik Aachen aus dem Jahr 2009. Hierdurch wurde der viel versprechende Erkenntnisgewinn zur Verletzungsschwere und Verletzungsmustern belegt, der durch eine Zusammenführung der Daten der laut amtlicher Unfallstatistik Schwerstverletzten mit denjenigen der nach medizinischen Krankenakten ermittelten schweren Unfälle bestätigt.
Since its beginning in 1999, the German In-Depth Accident Study (GIDAS) evolved into the presumably leading representative road traffic accident investigation in Europe, based on the work started in Hanover in 1973. The detailed and comprehensive description of traffic accidents forms an essential basis for vehicle safety research. Due to the ongoing extension of demands of researchers, there is a continuous progress in the techniques and systematic of accident investigation within GIDAS. This paper presents some of the most important developments over the last years. Primary vehicle safety systems are expected to have a significant and increasing influence on reducing accidents. GIDAS therefore began to include and collect active safety parameters as new variables from the year 2005 onwards. This will facilitate to assess the impact of present and future active safety measures. A new system to analyse causation factors of traffic accidents, called ACASS, was implemented in GIDAS in the year 2008. The whole process of data handling was optimised. Since 2005 the on-scene data acquisition is completely conducted with mobile tablet PCs. Comprehensive plausibility checks assure a high data quality. Multi-language codebooks are automatically generated from the database structure itself and interfaces ensure the connection to various database management systems. Members of the consortium can download database and codebook, and synchronize half a terabyte of photographic documentation through a secured online access. With the introduction of the AIS 2005 in the year 2006, some medical categorizations have been revised. To ensure the correct assignment of AIS codes to specific injuries an application based on a diagnostic dictionary was developed. Furthermore a coding tool for the AO classification was introduced. All these enhancements enable GIDAS to be up to date for future research questions.
The aim of this study is to investigate the differences in car occupant injury severity recorded in AIS 2005 compared to AIS 1990 and to outline the likely effects on future data analysis findings. Occupant injury data in the UK Cooperative Crash Injury Study Database (CCIS) were coded for the period February 2006 to November 2007 using both AIS 1990 and AIS 2005. Data for 1,994 occupants with over 6000 coded injuries were reviewed at the AIS and MAIS level of severities and body regions to determine changes between the two coding methodologies. Overall there was an apparent general trend for fewer injuries to be coded at the AIS 4+ severity and more injuries to be coded at the AIS 2 severity. When these injury trends were reviewed in more detail it was found that the body regions which contributed the most to these changes in severity were the head, thorax and extremities. This is one of the first studies to examine the implications for large databases when changing to an updated method for coding injuries.
Impact severity is a fundamental measure for all in-depth crash investigation projects. One methodology used in the UK is based on the US Calspan software package CRASH3. The UK- in-depth crash investigation studies routinely use AiDamage3 a software package which is based on an updated version of the original CRASH3 algorithm, including enhancements to the vehicle stiffness coefficients. Real world accident-damaged vehicles are measured and their crush is correlated with a library of stiffness coefficients. These measurements are then used, along with other parameters, to calculate the crash energy and equivalent changes of velocity of the vehicles (delta-v), which is a measure of the impact severity. UK in-depth accident studies routinely validate the crash severity methodologies applied as the vehicle fleet changes. This is achieved by analysing crash test data and using the appropriate residual crush damage and other inputs to AiDamage3 and checking the program- outputs with the known crash severity parameters. This procedure checks, at least in part, the default stiffness values in the data libraries and the reconstruction methods used.
Each year the traffic accident research teams in Dresden and Hanover provide an in-depth investigation of approximately two thousand accidents, aggregated in the GIDAS database. To accomplish a comprehensive review of each traffic accident recorded, a sensible and thorough encoding of suffered injuries is indispensable. The Abbreviated Injury Scale by AAAM offers a valuable and handy solution to achieve this goal. However, there were a few difficulties in the use of the AIS that came up in the past, which let to necessary improvements for the utilization of the AIS 2005 for GIDAS.
Nowadays, traffic accidents are recorded in historical databases. Regarding the huge quantity of data, the use of data mining tools is essential to help Experts, for automatically extracting relevant information in order to establish and quantify relations between severity and potential factors of accidents. An innovative approach is here proposed for an in depth investigation of real world accidents data base. Mutual information ratio based on conditional entropies is used to quantity the association strength between an accident outcome descriptor (injury severity) and other potential association factors. Information theoretic methods help to select automatically groups of factors mostly responsible of the severity of accident.
In the context of the COST357 research project, the climatic conditions and requirements for protective helmets for motorcyclists have been examined. The extent to which these factors would influence motorbike handling and accidents in which motorcyclists are involved have also been examined. This project addresses how cognitive abilities of motorcyclists relate to helmet construction factors. In particular, the aspects of motorcycle driver helmets are to be parameterized in order that they may be used subsequently as a basis for future requirement profiles. The task of one working group of the COST357 project has been to analyse accident events and to identify helmet design issues which affect motorcycle drivers while wearing a helmet. This has been achieved by collating accident data across different countries recorded in the course of in-depth investigations at the site of accidents and by combining this with field studies of motorcyclists participating in traffic, but not involved in accidents. This paper presents the study methodology, database and first results of this international survey. The basis of the study has been a total of 424 interviews of motorcyclists and 134 motorcycle accidents, which were collected across Germany, Greece, Italy, Ireland, Portugal and Turkey and combined in a single database.
A lack of representative European accident data to aid the development of safety policy, regulation and technological advancement is a major obstacle in the European Union. Data are needed to assess the performance of road and vehicle safety and is also needed to support the development of further actions by stakeholders. This short-paper describes the process of developing a data collection and analysis system designed to partly fill these gaps. A project team with members from 7 countries was set up to devise appropriate variable lists to collect fatal crash data under the following topic levels: accident, road environment, vehicle, and road user, using retrospective detailed police reports (n=1,300). The typical level of detail recorded was a minimum of 150 variables for each accident. The project will enable multidisciplinary information on the circumstances of fatal crashes to be interpreted to provide information on a range of causal factors and events surrounding the collisions.
The SafetyNet project was formulated in part to address the need for safety oriented European road accident data. One of the main tasks included within the project was the development of a methodology for better understanding of accident causation together with the development of an associated database involving data obtained from on-scene or "nearly onscene" accident investigations. Information from these investigations was complemented by data from follow-up interviews with crash participants to determine critical events and contributory factors to the accident occurrence. A method for classification of accident contributing factors, known as DREAM 3.0, was developed and tested in conjunction with the SafetyNet activities. Collection of data and case analysis for some 1 000 individual crashes have recently been completed and inserted into the database and therefore aggregation analyses of the data are now being undertaken. This paper describes the methodology development, an overview of the database and the initial aggregation analyses.
As the official German catalogue of accident causes has difficulty in matching the increasing demands for detailed psychologically relevant accident causation information, a new system, based on a "7 Steps" model, so called ACASS, for analyzing and collecting causation factors of traffic accidents, was implemented in GIDAS in the year 2008. A hierarchical system was developed, which describes the human causation factors in a chronological sequence (from the perception to concrete action errors), considering the logical sequence of basic human functions when reacting to a request for reaction. With the help of this system the human errors of accident participants can be adequately described, as the causes of each range of basic human functions may be divided into their characteristics (influence criteria) and further into specific indicators of these characteristics (e.g. distraction from inside the vehicle as a characteristic of an observation-error and the operation of devices as an indication for distraction from inside the vehicle. The causation factors accordingly classified can be recorded in an economic way as a number is assigned to each basic function, to each characteristic of that basic function and to each indicator of that characteristic. Thus each causation factor can be explicitly described by means of a code of numbers. In a similar way the causation factors based on the technology of the vehicle and the driving environment, which are also subdivided in an equally hierarchical system, can be tagged with a code. Since the causes of traffic accidents can consist of a variety of factors from different ranges and categories, it is possible to tag each accident participant with several causation factors. This also opens the possibility to not only assign causation factors to the accident causer in the sense of the law, but also to other participants involved in the accident, who may have contributed to the development of the accident. The hierarchical layout of the system and the collection of the causation factors with numerical codes allow for the possibility to code information on accident causes even if the causation factor is not known to its full extent or in full detail, given the possibility to code only those cause factors, which are known. Derived from the systematic of the analysis of human accident causes ("7 steps") and from the practical experiences of on-scene interviews of accident participants, a system was set in place, which offers the possibility to extensively record not only human causation factors in a structured form. Furthermore, the analysis of the human causation factors in such a structured way provides a tool, especially for on-scene accident investigations, to conduct the interview of accident participants effectively and in a structured way.
While many medical studies have dealt with the incidence, nature and treatment of polytrauma the injury-causing accident mechanisms are rarely discussed in detail, mostly due to the lack of documentation of the technical aspects. The present prospective study was started in late 2007 and collects data from traffic accidents with most severely injured in six south- German counties and two larger cities for the duration of one year. It is aimed at identifying and documenting all polytrauma cases (ISS ≥ 16) caused by traffic accidents and their crash circumstances. The data collection is based on an interdisciplinary concept to include both the police, emergency dispatch centers, hospitals and fire departments in the region and is completely anonymous. Potentially relevant cases where an emergency physician was called to the scene of a traffic accident are provided by the dispatch center. All three hospitals in the region suited for the treatment of polytraumatised patients record injuries, major diagnostic and surgery data. Data and images from the accident scene are provided by the police and by fire departments. The latter provide information which is usually not available from the police, like deployed airbags, vehicle extrication measures and detailed views of car interiors. The main objective of the study is to determine the structure of road users who sustain a polytrauma, their crash opponents and the injury patterns found in relation to the collision configuration and the protection by seat belts, air bags and other devices. With detailed documentation of vehicle damage and extrication measures the study is also intended to support the development of injury predictors for pre-hospital treatment and provide field data regarding further improvement of technical rescue.