Filtern
Dokumenttyp
- Konferenzveröffentlichung (12) (entfernen)
Schlagworte
- Ausrüstung (12) (entfernen)
Systematik zur Bewertung der Auswirkungen von Sicherheitseinrichtungen im Kraftfahrzeug (BASE)
(2000)
BASE kann als eine Art "Guide" zur Unterstützung im Prozess der Evaluation von Informations- und Sicherheitseinrichtungen (ISE) in Hinblick auf psychologische Auswirkungen eingesetzt werden. Es ist in Bewertungsbereiche gegliedert, die ihrerseits wiederum den verschiedenen Phasen der Marktdurchdringung zugeordnet sind: (1) Phase vor der eigentlichen Nutzung, (2) Phase der Nutzung und (3) Phase nach vorangeschrittener Diffusion der neuen Technologie. Für die Entwicklung von Informations- und Sicherheitseinrichtungen im Fahrzeug ist es erforderlich, die Sicherheitsanforderungen an solche Einrichtungen zu definieren. Hier stellt das vorliegende Bewertungssystem BASE einen umfassenden Rahmen dar. Ebenso lässt es sich zur Bewertung bereits bestehender Einrichtungen heranziehen. Dabei stehen neben den sensorischen, kognitiven, motivationalen, affektiven und verhaltensbezogenen Reaktionen einer Person auch die Auswirkungen der ISE auf die Sicherheit des Verkehrssystems zur Bewertung an. In diesem Zusammenhang werden der Prozess der reaktiven Verhaltensanpassung und der Marktdurchdringung als Einflussfaktoren auf die Verkehrssicherheit diskutiert.
Es wird über ein verbessertes Rückhaltesystem für Rollstuhlfahrer berichtet, die in Behindertentransportwagen befördert werden. Es besteht aus zwei Einzelsystemen, dem Personenrückhaltesystem und dem Rollstuhlrückhaltesystem. Basierend auf Ergebnissen von Aufprallversuchen mit handelsüblichen Rückhaltesystemen konnte ein Adaptersystem entwickelt werden, das der Aufnahme der Gurtbefestigungen für den Dreipunktgurt des Personenrückhaltesystems und der Befestigungen der Gurtzungen für die hinteren Rollstuhlabspannungen dient. Aufgrund eines gemeinsamen Befestigungspunktes wird gewährleistet, dass Rollstuhl- und Personenrückhaltesystem kombiniert wirken. Besonders im Becken- und Schulterbereich wird ein korrekter Gurtverlauf erreicht. Derzeit wird die DIN 75078 (Behindertentransportwagen) Teil 2 von der Bundesanstalt für Straßenwesen mit dem Ziel überarbeitet, das Rückhaltesystem zur Sicherung von Rollstuhlnutzern zu beschreiben.
The current maintenance management for bridges is mainly based on visual inspection and aims at the repair of identified damages. In the project cluster "Smart Bridge" an adaptive system for holistic evaluation in real time is developed. The following pilot studies show significant aspects of the Smart Bridge. Within the research project "Digital Test Area Autobahn" a new constructed prestressed concrete bridge is implemented with instrumented expansion joints and bearings, a "RTMS©" and a sensor network. By using analytical bridge models and evaluation methods the condition and reliability of the bridge as well as the remaining service life is determined. In the pilot study "duraBASt" sensors for the detection of durability and structural safety as well as data analyzing and evaluation procedures are investigated. The aim of this study is the partial implementation of the aspects: data collection, data processing and model development for condition assessment of the bridge.
The case study "Digital Test Area Autobahn" is presented. A new built (September 2016) pre-stressed concrete bridge is equipped with different monitoring systems for the detection of traffic load, climatic influence and the reaction of the bridge. Possibilities for the implementation of a VoI (Value of Information) analyses are presented.
Seit 1997 gibt es in Europa unter dem Namen Euro NCAP (European New Car Assessment Programme) einheitliche Test- und Ratingverfahren. Sie liefern Informationen über den Insassen- und über den Fußgängerschutz. Euro NCAP hat seither fast 90 Fahrzeugmodelle in jeweils drei unterschiedlichen Crashtest-Konfigurationen untersucht und die Ergebnisse den europäischen Konsumenten zugänglich gemacht. Im Beitrag wird auf die Testbedingungen, die Euro NCAP-Ratingverfahren sowie auf die Weiterentwicklung von Euro NCAP eingegangen. Ein wichtiger Aspekt wird dabei auch die weltweite Harmonisierung der Test- und Ratingverfahren sein.
Offenporige Asphaltbeläge besitzen mit 22 % Hohlraum im Belag und einer groben Kornstruktur an der Oberfläche einen wesentlich anderen Aufbau als dichte Beläge. Nach vorliegenden Erfahrungen und Ergebnissen von durchgeführten Untersuchungen erfordern die Belagseigenschaften der offenporigen Asphaltbeläge eine andere Anwendung von Tausalz. Die Bundesanstalt für Straßenwesen (BASt) führte in den vergangenen Jahren gemeinsam mit der Firma KOMMZEPT-Ingenieurbüro Hausmann umfangreiche Untersuchungen zum Salzeinsatz auf offenporigen Belägen durch. Dazu gehörten Laborversuche, Messungen zur Verweil- und Wirkungsdauer von Tausalz auf diesen Belägen und Auswertungen der Beobachtungen von Autobahnmeistereien in Bayern, Brandenburg und Niedersachsen. Die Ergebnisse der Untersuchungen zeigen, dass die offenporigen Beläge teilweise winterdienstlich anders behandelt werden müssen als die dichten Beläge. Die Offenporigen Asphalte besitzen im Vergleich zu dichten Belägen eine deutlich rauere Oberflächenstruktur. In den Poren des Belags fließt Wasser nicht vollständig ab. Durch Kapillarwirkungen lagert sich Wasser im Belag ähnlich wie in einem Schwamm ab. Dieses Wasser im Belag kann durch den Verkehr sogar wieder zur Oberfläche gesaugt werden, an der es bei Temperaturen unter 0 -°C vor allem nachts zu einer Eisschicht kommen kann. Aufgrund der größeren gebundenen Wassermengen muss mehr Salz auf offenporigen Asphalten gestreut werden. Ausgebrachtes Tausalz bleibt länger in den Oberflächenporen oder im Belag haften. Es wird im Vergleich zu dichten Belägen durch den Verkehr fast nicht zur Seite verweht. Vorbeugend ausgebrachtes Feuchtsalz dringt langsam in die Oberfläche ein. An den eigentlichen Kontaktflächen zum Reifen bleibt wenig haften. Deshalb ist der Einsatz von Tausalzlösungen bei Reifglätte oder geringer Feuchte (Nieselregen) wirkungsvoller.
Europa bedeutet nicht nur eine gemeinsame Währung, sondern auch die Schaffung eines gemeinsamen Marktes verbunden mit dem Abbau von Handelshemmnissen. Dies bedeutet für Produkte aus dem Bereich Straßenausstattung, dass die unterschiedlichen nationalen Anforderungen durch einheitliche europäische Anforderungen ersetzt werden. Nationale Freigaben scheinen daher nicht im Sinne Europas zu sein, da durch zusätzliche nationale Anforderungen Handelshemmnisse eher aufgebaut als abgebaut werden. Die nationalen Freigaben im Bereich Straßenausstattung dienen jedoch nicht dem Aufbau neuer Handelshemmnisse, sondern der Umsetzung europäischer Vorgaben auf nationaler Ebene. Durch die mithilfe der nationalen Freigaben getroffene Vorauswahl können bereits während der Ausschreibungsphase Produkte erkannt werden, die die nationalen Randbedingungen nicht erfüllen beziehungsweise beim Einsatz zu Kompatibilitätsproblemen führen. Um dies zu verdeutlichen, werden exemplarisch für den Bereich Straßenausstattung die europäischen Anforderungen sowie die zusätzlichen Anforderungen aus den nationalen Freigaben für Fahrzeug-Rückhaltesysteme, Verkehrszeichenfolien und Fahrbahnmarkierungen betrachtet.
Ungefähr 20 Jahre nach der Einführung der Bauproduktenrichtlinie (Richtlinie 89/106/EWG, BauPR) wurde im April 2011 im Amtsblatt der Europäischen Union das Nachfolgewerk, die Verordnung (EU) Nummer 305/2011 (Bauproduktenverordnung, BauPVO), veröffentlicht. Zielsetzung der Überarbeitung war der Wunsch nach Klarstellung, nach Erleichterungen für Kleinere und Mittlere Unternehmen bei der Anwendung, aber insbesondere der Wunsch nach mehr Vertrauen in die CE-Kennzeichnung. Mit der Herausgabe einer unmittelbar verbindlichen Verordnung hat die Europäische Kommission den Stellenwert dieses Dokuments verdeutlicht und wirkt damit zugleich auf eine einheitliche Anwendung im europäischen Wirtschaftsraum hin. Darüber hinaus enthält die BauPVO im Detail eine Vielzahl von Änderungen gegenüber der BauPR, sodass eine zweistufige Einführung mit einer vollständigen Wirksamkeit aller Artikel der BauPVO zum 01. Juli 2013 vorgesehen ist, um den Wirtschaftsakteuren eine Frist zur Vorbereitung und Umstellung zu gewähren. Bestehende harmonisierte Normen für Bauprodukte haben auch nach dem 1.7.2013 weiterhin Bestand und müssen erst im Zuge der turnusmäßigen Überarbeitung an die Vorgaben der BauPVO angepasst werden. Unabhängig davon sind die Hersteller von Bauprodukten verpflichtet, anstelle des Konformitätsnachweises eine Leistungserklärung abzugeben. Diese kann auf der Basis der vorhandenen Dokumentation, z.B. der Erstprüfung erstellt werden.
Thoracic injuries are one of the main causes of fatally and severely injured casualties in car crashes. Advances in restraint system technology and airbags may be needed to address this problem; however, the crash test dummies available today for studying these injuries have limitations that prevent them from being able to demonstrate the benefits of such innovations. THORAX-FP7 was a collaborative medium scale project under the European Seventh Framework. It focused on the mitigation and prevention of thoracic injuries through an improved understanding of the thoracic injury mechanisms and the implementation of this understanding in an updated design for the thorax-shoulder complex of the THOR dummy. The updated dummy should enable the design and evaluation of advanced restraint systems for a wide variety (gender, age and size) of car occupants. The hardware development involved five steps: 1) Identification of the dominant thoracic injury types from field data, 2) Specification of biomechanical requirements, 3) Identification of injury parameters and necessary instrumentation, 4) Dummy hardware development and 5) Evaluation of the demonstrator dummy. The activities resulted in the definition of new biofidelity and instrumentation requirements for an updated thorax-shoulder complex. Prototype versions were realised and implemented in three THOR dummies for biomechanical evaluation testing. This paper documents the hardware developments and biomechanical evaluation testing carried out.
New vehicle types are extensively tested to check almost all factors that influence ride and handling. With reference to the Association of German Car Tuners" (VDAT e.V.) valuations, approximately 10% of all cars in Germany are being modified by their owners. 28 % of those modifications" sales are divergent wheel-tire combinations, 13 % are tuning measures on the chassis suspension or wheel spacers. In almost all cases the singular modifications present a general permission for specific vehicles they have been tested in. Combined tuning measures, however, are often checked by just one inspector, following a procedure of mostly subjective assessment criteria. Today, critical attributes are only being observed, in case a vehicle is involved in an accident and the modifications are identified as crash causal factors or as a cofactor on the development of a crash. For the first time, a field study allows a survey of safety affecting chassis modifications. The test layout has to comply with some basic conditions. Different vehicle concepts with a wide margin of modifications are required to get a high transferability of the results. A total amount of more than 150 tested vehicles serves the same purpose. The tests are limited concerning the installation time of measurement techniques and the requirement that no damage, defilement or immoderate wear of the vehicles are accepted by their owners. Due to such factors as well as the driver Ìs acceptance, the vehicles are controlled by its owners instead of robots or test drivers. For keeping down the driver- influence, the lane has narrow boundaries and the driver has to drive in strictly adherence to the given instructions. After gathering all modifications, as well as static and kinematic parameters like the toe and camber angle, dynamic testing of predominantly lateral dynamics is conducted. Besides standardized tests like the ISO 3888-2 (Obstacle Avoidance) or the ISO 14512 (Braking on Surfaces with Split Coefficient of Friction), to test the influence of modified kingpin offsets caused by wheel spacers, some deviant tests are conducted. Those are required due to the demand of objective test results for road tests with vertical induced stimulation of the chassis suspension. Hence, new tests on corner braking with and without vertical stimulation have been developed. The interpretation of data includes thresholds, e.g. the maximum entrance velocity without hitting cones, on the one hand, and the analysis of characteristics of data concerning time and frequency range, "1-second values" and peak response times on the other hand. Besides the thresholds as indicators for the achievable velocities, which are mainly affected by friction coefficients, the vehicle reaction in the course of time characterizes the vehicle reaction in the threshold range and consequently the operational demands on the driver. The field study has started and promises the first long-range analysis of chassis modifications. The results offer a basis for hypothesis and resultant further test layouts for oncoming studies of the identified critical tuning measures.
Every second counts when human lives are at stake. The increasingly safe design of vehicles presents rescuers with a serious challenge. Faced with high-strength steels and body reinforcements, even the most powerful cutters reach their limits. Therefore, incident commanders require information on the technical features and components installed, directly in the vehicle. Several tests have shown that such information helps to save valuable minutes. Therefore, a standardised A4 "rescue sheet" containing information on the location of cabin reinforcements, the tank, the battery, airbags, gas generators, control units etc. " and indicating adequate cutting points must be used throughout Europe. Hopefully, in a few years, the new eCall emergency call system will be in place everywhere in Europe. The system will transmit the relevant vehicle-specific data directly to the rescuers on-site. Until then, we need a simple and effective solution that saves lives.
Electronic Stability Program (ESP) aims to prevent the lateral instability of a vehicle. Linked to the braking and powertrain systems, it prevents the car from running wide on a corner or the rear from sliding out. It also helps the driver control his trajectory, without replacing him, in the case of loss of control where the driver is performing an emergency manoeuvrer (confused and exaggerated steering wheel actions). A new ESP function optimizes ESP action in curves with hard under steering (situations in which the front wheels lose grip and the vehicle slides towards the outside of the curve). A complementary feature prevents the wheels from spinning when pulling away and accelerating. The name given to the ESP system varies according to the vehicle manufacturer, but other terms include: active stability control (ASC), automotive stability management system (ASMS), dynamic stability control (DSC), vehicle dynamic control (VDC), vehicle stability control (VSC) or electronic stability Control (ESC). This paper proposes an evaluation of the effectiveness of ESP in terms of reduction of injur accidents in France. The method consists of 3 steps: - The identification, in the French National injury accident census (Gendarmerie Nationale only), of accident-involved cars for which the determination of whether or not the car was fitted with ESP is possible. A sample of 1 356 cars involved in injury accidents occurred in 2000, 2001, 2002 and 2003 was then selected. But we had to restrict the analysis to only 588 Renault Lagunas. - The identification of accident situations for which we can determine whether or not ESP is pertinent (for example ESP is pertinent for loss of control accidents whilst it is not for cars pulling out of a junction). - The calculation, via a logistic regression, of the relative risk of being involved in an ESPpertinent accident for ESP equipped cars versus unequipped cars, divided by the relative risk of being involved in a non ESP-pertinent accident for ESP equipped cars versus unequipped cars. This relative risk is assumed to be the best estimator of ESP effectiveness. The arguments for such a method, effectiveness indicator and implicit hypothesis are presented and discussed in the paper. Based on a few assumptions, ESP is proved to be highly effective. Currently, the relative risk of being involved in an ESP pertinent accident for ESP-equipped cars is lower (-44%, although not statistically significant)rnthan for other cars.rn