In recent years considerable progress in active and passive safety of road vehicles has been made. The road traffic of today is much safer than in the past. A current vehicle has a lot more safety elements resulting in an improved inner and outer technique. In most European countries the number of fatalities is decreasing despite growing traffic and road usage. Nevertheless, the number of casualties in road traffic accidents is high enough, thus more progress is needed if the number of fatalities is to be reduced by 50%, as postulated by the European Commission for the year 2010. In order to develop countermeasures and further possibilities for injury prevention, it is increasingly important to have accident data available, supplying results quickly and giving the best overview across Europe. In-Depth-Data Sampling Procedures have a huge historical development, starting in the 60ies by the car manufactures, continued during the 70ies mostly by some universities mainly in England, Sweden, France and Germany, today a net of in-depth-investigation teams are working across Europe and around the world.One of the oldest teams is located at the Hannover Medical School, founded in 1973 by the German Government on behalf of the Federal Highway Research Institute Bast. It was the only team worldwide that was equipped with blue light emergency cars, working on scene in time so directly after the event and working continuously during the years, collecting 20 thousand accidents within 30 years period. Since 1999 the order is carried out in cooperation with the German car industry, which is interested and has benefit on the data too. On the basis of the new data collection, so called GIDAS (German In-Depth Accident Study), that has been run at the Technical University Dresden and the Medical University Hannover), a special tool for In-Depth-Accident Analysis was founded. It is the task of this conference to build a platform for such research based on In-Depth-Investigation. The conference is specially aimed at the area of accident data analysis in order to contribute to the harmonization of different investigation methods and accumulation of different results that does exist for different countries worldwide. Up to now no special conference did exist to deal with accident data only following in the discussion for an improvement in traffic and vehicle safety. ESAR - expert symposium on accident research - should be a step forward. This first international conference is being organized by the Accident Research Unit at the Medical University Hannover jointly with the German Federal Highway Research Institute Bast and the Research Association of German Car Manufacturers FAT. The conference should be a platform for an interdisciplinary exchange of information based on the different presentations from participants around the world.
The second ESAR Conference took place at the Medical University Hannover. This year conference presents the current state of affairs of relevant research activities in the field of in-depth investigations. The first conference on ESAR (Expert Symposium on Accident Research) was established in 2004. It is planned to hold ESAR every two years. Hannover seems to be the right place for this conference concerning the fact that the first in-depth research team was found here in the year 1973 and comprehensive studies on accident analysis were spread out from here around the world continuously. This year conference topped all expectations in terms of the numbers of participants, in the variety of papers and the interdisciplinary of presenters from medical, psychological and engineering background. More than 100 delegates from all over the world, that means 13 different countries and from 4 different continents, came to Hannover, presented their results of accident investigation and discussed countermeasures for accident prevention and injury reduction. ESAR should be a platform for exchange of knowledge to find an optimized way for increase of traffic and vehicle safety by in-depth investigation and methodology. ESAR as international conference should be a platform for consideration of all nations round the world. This seems to be very important for the current situation, having high safety in the high industrial countries of Europe, US and Australia, but low safety and high injury risk in Asia and Africa.
Road safety is a major preoccupation of the European Commission and the road transport industry and depends on numerous significant factors. In order to improve road safety and to plan effective safety improvement actions for truck transport, we must first identify the problems to be addressed, i.e. what are the main causes of truck accidents. The ETAC project, initiated by the European Commission and the IRU, was launched in order to set up a heavy goods vehicle accident causation study across European countries to identify future actions which could contribute to the improvement of road safety. The results will be based on a detailed analysis of truck accident data collected in seven European countries according to a common methodology which has been elaborated through numerous national and European projects. This paper describes the common methodology used to collect the information on the scene of the accident and to analyse the data so that the reconstruction of the crash events may be carried out. CEESAR proposes a methodology using its experience gained from over 10 years of accident data collection. This methodology is based on an in-depth investigation of the parameters involved in-an accident and linked to the driver, the vehicle, the road and their environment. In-depth investigation requires accident investigator presence on the scene of the accident in order to collect volatile information such as marks on the road, weather conditions, visibility, state and equipment of the vehicle, driver interview. Later, passive and active information is gathered, either at the hospital for the driver, at the garage for the vehicle or on the spot for the road geometry. A reconstruction carried out with the help of specific software and the analysis of the data collected and calculated enables the identification of the main causes of the accident and the future actions to plan in order to improve road safety as regards truck traffic.
A lack of representative European accident data to aid the development of safety policy, regulation and technological advancement is a major obstacle in the European Union. Data are needed to assess the performance of road and vehicle safety and is also needed to support the development of further actions by stakeholders. This short-paper describes the process of developing a data collection and analysis system designed to partly fill these gaps. A project team with members from 7 countries was set up to devise appropriate variable lists to collect fatal crash data under the following topic levels: accident, road environment, vehicle, and road user, using retrospective detailed police reports (n=1,300). The typical level of detail recorded was a minimum of 150 variables for each accident. The project will enable multidisciplinary information on the circumstances of fatal crashes to be interpreted to provide information on a range of causal factors and events surrounding the collisions.
In the context of the COST357 research project, the climatic conditions and requirements for protective helmets for motorcyclists have been examined. The extent to which these factors would influence motorbike handling and accidents in which motorcyclists are involved have also been examined. This project addresses how cognitive abilities of motorcyclists relate to helmet construction factors. In particular, the aspects of motorcycle driver helmets are to be parameterized in order that they may be used subsequently as a basis for future requirement profiles. The task of one working group of the COST357 project has been to analyse accident events and to identify helmet design issues which affect motorcycle drivers while wearing a helmet. This has been achieved by collating accident data across different countries recorded in the course of in-depth investigations at the site of accidents and by combining this with field studies of motorcyclists participating in traffic, but not involved in accidents. This paper presents the study methodology, database and first results of this international survey. The basis of the study has been a total of 424 interviews of motorcyclists and 134 motorcycle accidents, which were collected across Germany, Greece, Italy, Ireland, Portugal and Turkey and combined in a single database.
While many medical studies have dealt with the incidence, nature and treatment of polytrauma the injury-causing accident mechanisms are rarely discussed in detail, mostly due to the lack of documentation of the technical aspects. The present prospective study was started in late 2007 and collects data from traffic accidents with most severely injured in six south- German counties and two larger cities for the duration of one year. It is aimed at identifying and documenting all polytrauma cases (ISS ≥ 16) caused by traffic accidents and their crash circumstances. The data collection is based on an interdisciplinary concept to include both the police, emergency dispatch centers, hospitals and fire departments in the region and is completely anonymous. Potentially relevant cases where an emergency physician was called to the scene of a traffic accident are provided by the dispatch center. All three hospitals in the region suited for the treatment of polytraumatised patients record injuries, major diagnostic and surgery data. Data and images from the accident scene are provided by the police and by fire departments. The latter provide information which is usually not available from the police, like deployed airbags, vehicle extrication measures and detailed views of car interiors. The main objective of the study is to determine the structure of road users who sustain a polytrauma, their crash opponents and the injury patterns found in relation to the collision configuration and the protection by seat belts, air bags and other devices. With detailed documentation of vehicle damage and extrication measures the study is also intended to support the development of injury predictors for pre-hospital treatment and provide field data regarding further improvement of technical rescue.
Ein auf Nachhaltigkeit angelegtes Großprojekt wie das der Zustandserfassung und -bewertung (ZEB) bedarf eines Qualitätssicherungssystems. Hierfür wurde auf Initiative des Bundesministeriums für Verkehr, Bau- und Wohnungswesen (BMVBW) eine Untersuchung ausgelöst, über die die Grundlagen und Voraussetzungen für ein umfassendes QS-System erarbeitet werden sollen. In einer Pilotierungsphase soll im Jahr 2002 die Machbarkeit nachgewiesen werden.
The accident research project in Dresden was founded in July 1999. To date over 6.000 crash investigations have been undertaken. About 10.000 vehicles have been documented and over 13.000 participants have been debriefed. But there is much more than this scientific success. Because of the interdisciplinary character between the medical and technical focus, the project affords an important contribution for the education of the involved students. Over 200 students of different fields of study have got experiences not only for the occupational career. This lecture describes the additional effects of the accident research project regarding the education of the students, the capacity for teamwork and learning about dealing with accident casualties.
An approach to the standardization of accident and injury registration systems (STAIRS) in Europe
(1998)
STAIRS is a European Commission funded study whose aim is to produce a set of guidelines for a harmonised, crash injury database. The need to evaluate the effectiveness of the forthcoming European Union front and side impact directives has emphasised the need for real world crash injury data-sets that can be representative of the crash population throughout Europe. STAIRS will provide a methodology to achieve this. The ultimate aim of STAIRS is to produce a set of data collection tools which will aid decision making on vehicle crashworthiness as well as providing a means to evaluate the effectiveness of safety regulations. This paper will disseminate the up-to-date findings of the group as they try to harmonise their methods. The stage has been reached where studies into the diverse methods of the UK, French and German systems of crash injury investigation have been undertaken. An assessment has already been made of the relationships between the three current systems in order to define the areas of agreement and divergence. The conclusions reached stated that there were many areas that are already closely related and that the differences were only at the detailed level. With the emphasis on secondary safety and injury causation, core data sets were decided upon, taking into account: vehicle description, collision configuration, structural response of vehicles, restraint and airbag performance, child restraint performance, Euro NCAP, pedestrian and vehicle occupant kinematics, injury description and causation. Each variable was studied objectively, the important elements isolated and developed into a form that all partners were agreeable on. A glossary of terms is being developed as the project progresses which includes ISO standards and other definitions from the associated CAREPLUS project, which addresses the comparability of national data sets. A major consideration of the group was the data collection method to be employed. The strengths and weaknesses of each study were investigated to obtain a clear idea of which aspects offered the best way forward. The quality of this information and transference into a common format, as well as the necessary error checking systems to be employed have just been completed and are described. In tandem with this area of study the problem of the statistical relationship of each sample to the national population is also being investigated. The study proposes a mechanism to use a sample of crash injury data to represent the national and international crash injury problem
Adverse weather could impair the performance of many important parts in road transportation. In a tropical country, the threats posed by the weather phenomenon can be viewed from a different perspective as the situation may not be as extreme as snow-related problems or excessive temperature in other countries. Specifically in Malaysia, the situation may be underestimated due to several reasons such as the deficiencies in accident reporting and lack of research work. This background research has looked into various publications as well as related data to explain the need of more comprehensive research in the future.
Mit Hilfe der Datenbestände von 7 Städten werden die Grundlagen für eine praxisgerechte Weiterentwicklung des Bewertungsverfahrens für den messtechnisch erfassten Zustand von Innerortsstraßen mit den erforderlichen Normierungsfunktionen, den Ziel-, Warn- und Schwellenwerten und maßgeblichen Funktionsklassen erarbeitet. Für die Auswerteabschnitte ergab sich eine Länge von 10 m als sinnvoll, aus der problemlos Zustandsindikatoren auch für längere Abschnitte ermittelt werden können. Die bisher verwendeten Zustandsindikatoren für die Längsebenheit, Querebenheit und Substanz werden auf ihre Brauchbarkeit untersucht und verbesserte beziehungsweise neue Indikatoren mit den dazugehörigen Normierungsfunktionen vorgeschlagen. Für die Griffigkeit standen keine Analysedaten zur Verfügung. Hier konnte für die Festlegung von Ziel-, Warn- und Schwellenwerten auf entsprechende Normierungsfunktionen für Außerortsstraßen zurückgegriffen werden. Weiterhin werden Vorschläge für die Verknüpfung zum Gebrauchs-und Substanzwert erarbeitet. Für die Relativierung der Anforderungen an den Zustand von Asphaltfahrbahnen werden zwei Funktionsklassen für die Straßenkategorien "Hauptverkehrs-/verkehrs-/Sammelstraßen" (FK 1) und "Anlieger-/Wohnstraßen" (FK 2) vorgeschlagen. Weiterhin wird eine dritte Funktionsklasse für Pflasterstraßen eingeführt. Ihre unterschiedlichen Normierungsfunktionen gewährleisten bei gleichen Zustandsausprägungen eine unterschiedliche Einstufung der Dringlichkeit von Maßnahmearten. Die Untersuchungsergebnisse sind zusätzlich in Form eines Arbeitspapiers aufbereitet.
Accidents with vulnerable road users require special attention within the road safety work because these accidents are often accompanied with severe injuries. Thus In 2006 at least 6200 Powered Two Wheeler (PTW) riders were killed in road crashes in the EU 25 representing 16% of the total number of road deaths while accounting for only 2% of the total kilometers driven. For the prevention of accidents with VRU above all the knowledge of the causes of the accidents is of special importance. This study is based on the methodology of the German In-Depth Accident Study GIDAS. Within GIDAS extensive data on various fields of accidentology are collected on-scene from road traffic accidents with injuries in the Hannover and Dresden area. Using a well defined sample plan the collected data is highly representative to the whole German situation (Brühning et al, Otte et al). The need of in-depth accident causation data in accident research led to the development of a special tool for the collection of such data called ACASS (Accident Causation Analysis with Seven Steps), which was implemented in the GIDAS methodology in 2008 and described by Otte in 2009.
Für den in den vergangenen Jahren stark wachsenden Radwegebestand sollten die weitgehend noch fehlenden Verfahrensgrundlagen einer systematischen baulichen Erhaltung erarbeitet werden. Untersuchungsgegenstand waren dabei Radwege mit Asphalt-, Beton- und Pflasterdecken sowie wassergebundenen Decken in Baulast des Bundes. Die Ziele der baulichen Erhaltung bestehen bei den Radwegen ähnlich wie bei Fahrbahnen in der Gewährleistung einer angemessenen Verkehrssicherheit und Befahrbarkeit sowie in einer rechtzeitigen wirtschaftlichen Substanzerhaltung. Als Zustandsmerkmale zur umfassenden Beschreibung der für die Zielkriterien relevanten Schäden und Mängeldienen die vertikalen Schwingbeschleunigungen (Effektivwert in m/s-² pro m) oder die Höhenlängsprofile (pro cm) zur Kennzeichnung der Längsebenheit sowie Risse und sonstige Oberflächenschäden zur Beschreibung des Substanzzustands. Die Substanzmerkmale werden ebenso wie konstruktiv bedingte Mängel (überstehende/abgesackte Einbauten, Bordsteine, Wurzelhebungen) im 1-m-Raster ausgewertet. Das für die Zustandserfassung auf Basis vorliegender in- und ausländischer Erfahrungen entwickelte Messfahrrad ermöglicht mit Elektrounterstützung (Pedelec) eine weitgehend konstante Fahrtgeschwindigkeit von 25 km/h und eine Tagesbefahrungsleistung ≥ 50 km. Aufgezeichnet werden digitale Videos, GPS-Tracks, die vertikale Schwingbeschleunigung (mit Beschleunigungsaufnehmer) und Tonsignale für besondere Markierungen. Bei der Zustandsbewertung werden die für homogene Auswerteabschnitte ermittelten dimensionsbehafteten Zustandsgrößen in dimensionslose Zustandswerte (Noten von 1 bis 5) überführt, um eine Verknüpfung unterschiedlicher Merkmale zum Gebrauchs- und Substanzwert zu ermöglichen. Der Gebrauchswert, der für die Zielkriterien Sicherheit und Befahrbarkeit steht, entspricht bei Radwegen dem Zustandswert der vertikalen Schwingbeschleunigung. Beim Substanzwert werden vereinfachend nur die Risse mit den zusammengefassten restlichen Schäden ("Restschadensfläche") verknüpft. Die mitgeführten Informationen zu den konstruktiv bedingten Mängeln dienen nur zur Steuerung des Erhaltungsgeschehens. Für die Erhaltungsplanung werden zusätzlich zu den Ergebnissen der Zustandserfassung/-bewertung und den Netzkenngrößen mindestens noch die Radwegbreiten, die Deckschichtarten sowie grobe Angaben zum Befestigungsaufbau (standardisiert/nicht standardisiert) und zum Deckenalter benötigt. Derzeit müssen die Daten im Regelfall in einer lokalen Datei für die Erhaltungsplanung vorgehalten werden, die bezüglich der Netzdaten häufig mit der jeweiligen Straßendatenbank abgestimmt werden sollte. Aus den homogenen Auswerteabschnitten dieser Datei werden längere Erhaltungsabschnitte gebildet. Danach können Bereiche ausgesondert werden, für die punktuelle/kleinflächige Maßnahmen der baulichen Unterhaltung zur Beseitigung örtlicher Schäden bzw. konstruktiv bedingter Mängel oder auch Sondermaßnahmen(z. B. bei Wurzelhebungen) zweckmäßig sind. Der Bedarf an Instandsetzungen und Erneuerungen kann auf Basis von Mängelklassen, die ab Zustandswerten von 3,5 (Warnwert) mit Hilfe von Bestands- und Zustandskonstellationen abgrenzbar sind, in ein erstes einfaches, nach Dringlichkeiten sortiertes Erhaltungsprogramm überführt werden. Zuvor kann eine Zustandsfortschreibung mit pragmatisch festgelegten Verlaufsfunktionen erfolgen. Die Kostenwerte für die Instandsetzungs- und Erneuerungsmaßnahmearten für Radwege sind derzeit noch in Analogie zur Fahrbahnerhaltung abgeschätzt. Die ausgearbeiteten Verfahren zur Bewertung der Maßnahmenutzen und zur netzweiten Optimierung von Maßnahmealternativen sind auch für kleine Radwegenetze letztlich nur mit einem IT-Verfahren ("PMS-Radwege") umsetzbar. Im Projektablauf waren vielfach zeitintensive grundlegende Analysen erforderlich. Es ist jedoch gelungen, ein Verfahren zu entwickeln und durch Tests zur Anwendungsreife zu bringen, das auf dem naheliegenden Fahrzeug für die Zustandserfassung von Radwegen, dem Fahrrad, basiert. Auch aufgrund einer sehr eingeschränkten Verwendbarkeit von Daten aus vorliegenden netzweiten Erfassungen sind zur Überprüfung und Verifizierung der entwickelten Verfahren insbesondere zur Erfassung und Auswertung der vertikalen Schwingbeschleunigung wie auch zur Erhaltungsplanung weitere Untersuchungen und Sensitivitätsanalysen erforderlich.
Each year the traffic accident research teams in Dresden and Hanover provide an in-depth investigation of approximately two thousand accidents, aggregated in the GIDAS database. To accomplish a comprehensive review of each traffic accident recorded, a sensible and thorough encoding of suffered injuries is indispensable. The Abbreviated Injury Scale by AAAM offers a valuable and handy solution to achieve this goal. However, there were a few difficulties in the use of the AIS that came up in the past, which let to necessary improvements for the utilization of the AIS 2005 for GIDAS.
In der Delegierten Verordnung (EU) 2015/962 (Europäische Kommission, 2015) wird von den Mitgliedsstaaten neben der Einrichtung nationaler Zugangspunkte zu Straßen- und Verkehrsdaten auch die gemeinsame Definition von Datenqualitätsindikatoren und Methoden zur Qualitätsbewertung und -kontrolle der verschiedenen Datenarten gefordert. Ziel dieses Projektes war es daher, ein Qualitätsmanagementsystems (QMS) für die Erfassung und Weiterverarbeitung von Daten für IVS-Dienste zu entwickeln und für die Datenarten Baustelleninformationen und Reisezeitinformationen zu spezifizieren. Dazu wurden - der Stand der Wissenschaft und Technik recherchiert, - Kriterien, Kenngrößen und Verfahren zur Messung der Qualität von Baustellen- und Reisezeitinformationen definiert, - ein organisatorischer Rahmen für ein Qualitätsmanagement erstellt, - ein Prozess zur Zertifizierung von bei Organisationen (i. d. R. Datengebern) eingeführten QMS entwickelt und - ein Leitfaden erstellt, der die Organisationen bei der Einführung und Anwendung eines QMS helfen soll. Durch die Einführung, Anwendung und regelmäßige Prüfung des im Rahmen dieses Projektes entwickelten und im zugehörigen Leitfaden beschriebenen QMS kann seitens der Datengeber ein Großteil der im Rahmen des Projektes identifizierten Probleme erkannt und behoben werden. Wesentliche Maßnahmen sind dabei, - die eindeutige Übertragung der Verantwortung für die Qualität der bereitgestellten Informationen auf die Datengeber, - die Bereitstellung (Finanzierung), regelmäßige Schulung und Motivation von zuständigem Personal mit ausreichendem Zeitbudget, - die bereits begonnene Überarbeitung der DATEX- II-Profile, - die Bereitstellung DATEX-II-Profilkonformer Systeme zur Eingabe und Übertragung der Meldungen und - die Lieferung von Qualitätskenngrößen mit den Informationen.
Die Ermittlung von Grundunfallkostenraten und Quantifizierung von Zuschlägen für Landstraßenquerschnitte sind Ziel dieses Forschungsvorhabens. Die Ergebnisse sollen eine Bewertungsgrundlage im Handbuch für die Verkehrssicherheit von Straßen (HVS) darstellen. 3.600 km Landstraße aus sechs Bundesländern liegen dem Untersuchungskollektiv zu Grunde. Neben dem mehrjährigen Unfallgeschehen bilden Daten der SIB und Erhebungen aus Streckenbefahrungen die Datengrundlage der Untersuchungen. Die Zuordnung der Streckenabschnitte erfolgte in Anlehnung an den Entwurf der Richtlinie für die Anlage von Landstraßen (RAL) in fünf verschiedene (Regel-) Querschnittsgruppen. Multivariate Modelle zur Beschreibung der Unfallhäufigkeit bilden die mathematische Grundlage der Analyse. Gegenüber monokausalen Betrachtungen weisen sie den Vorteil auf, eine Vielzahl von Einflussgrößen zu erfassen sowie mögliche Abhängigkeiten zwischen verschiedenen Variablen zu berücksichtigen. Für die verschiedenen Straßenquerschnitte und Einmündungen mit Vorfahrtregelung durch Verkehrszeichen wurden jeweils drei Modelle nach Unfallschwere erstellt. Zu Grunde liegende Merkmale wurden auf ihren signifikanten Erklärungsanteil zur Beschreibung der Unfallhäufigkeit geprüft und entsprechend im Modell als Zuschlag berücksichtigt. Auf Basis dieser Ergebnisse wurden Funktionen zum Verlauf der Unfallrate und Unfallkostenrate erzeugt. Grundunfallkostenraten beschreiben das fahrleistungsbezogene Unfallkostenniveau eines Netzelements, welches bei regelkonformem Ausbau der Strecke erreicht werden kann. Da in den Modellen auch Merkmale berücksichtigt sind, die kein Defizit im eigentlichen Sinne darstellen, entspricht die Höhe der UKR ohne jegliche Zuschläge einem Grundniveau. Diesem sind Zuschläge, unterteilt in Defizite und die Streckencharakteristik beschreibende Eigenschaften, zuzuordnen. Anhand der Modelle kann nachgewiesen werden, dass verschiedene Straßenquerschnitte ein unterschiedliches Grundsicherheitsniveau aufweisen. Zwischen Unfallhäufigkeit und DTV besteht ein nichtlinearer Zusammenhang. Die Unfallrate bzw. Unfallkostenrate stellt somit eine vom DTV abhängige Kenngröße dar. In Abhängigkeit des Querschnitts besitzen verschiedene Merkmale einen Einfluss auf die Verkehrssicherheit. Die Größenordnung der Zuschläge kann als Anteil am Grundniveau der UKR beschrieben werden. Die ermittelten Zuschläge wurden ggf. vergleichend betrachtet und im Rahmen einer plausibilisierten Bewertung der Querschnitte angepasst. In Anlehnung an das HVS erfolgt die Darstellung der Berechnung für Grundunfallkostenraten und deren Zuschläge für Landstraßenquerschnitte. Dabei werden zwei verschiedene Ansätze vorgestellt. Die Ergebnisse für Einmündungen mit Vorfahrtregelung durch Verkehrszeichen besitzen empfehlenden Charakter.
Causation patterns and data collection blind spots for fatal intersection accidents in Norway
(2010)
Norwegian fatal intersection accidents from the years 2005-2007 were analysed to identify any causation patterns among their underlying contributing factors, and also to evaluate whether the data collection and documentation procedures used by the Norwegian in-depth investigation teams produces the information necessary to perform causation pattern analysis. A total of 28 fatal accidents were analysed. Details on crash contributing factors for each driver in each crash were first coded using the Driving Reliability and Error Analysis Method (DREAM), and then aggregated based on whether the driver was going straight or turning. Analysis results indicate that turning drivers to a large extent are faced with perception difficulties and unexpected behaviour from the primary conflict vehicle, while at the same time trying to negotiate a demanding traffic situation. Drivers going straight on the other hand have less perception difficulties. Instead, their main problem is that they largely expect turning drivers to yield. When this assumption is violated, they are either slow to react or do not react at all. Contributing factors often pointed to in literature, e.g. high speed, drugs and/or alcohol and inadequate driver training, played a role in 12 of 28 accidents. While this confirms their prevalence, it also indicates that most drivers end up in these situations due to combinations of less auspicious contributing factors. In terms of data collection and documentation, information on blunt end factors (those more distant in time/space, yet important for the development of events) was more limited than information on sharp end factors (those close in time/space to the crash). A possible explanation is that analysts may view some blunt end factors as event circumstances rather than contributing factors in themselves, and therefore do not report them. There was also an asymmetry in terms of reported obstructions to view due to signposts and vegetation. While frequently reported as contributing for turning drivers, they were rarely reported as contributing for their counterparts in the same accidents. This probably reflects an involuntary focus of the analyst on identifying contributing factors for the driver legally held liable, while less attention is paid to the driver judged not at fault. Since who to blame often is irrelevant from a countermeasure development point of view, this underlying investigator mindset needs addressing to avoid future bias in crash investigation reports.
The aim of this study is to investigate the differences in car occupant injury severity recorded in AIS 2005 compared to AIS 1990 and to outline the likely effects on future data analysis findings. Occupant injury data in the UK Cooperative Crash Injury Study Database (CCIS) were coded for the period February 2006 to November 2007 using both AIS 1990 and AIS 2005. Data for 1,994 occupants with over 6000 coded injuries were reviewed at the AIS and MAIS level of severities and body regions to determine changes between the two coding methodologies. Overall there was an apparent general trend for fewer injuries to be coded at the AIS 4+ severity and more injuries to be coded at the AIS 2 severity. When these injury trends were reviewed in more detail it was found that the body regions which contributed the most to these changes in severity were the head, thorax and extremities. This is one of the first studies to examine the implications for large databases when changing to an updated method for coding injuries.
Die von verschiedenen internationalen Organisationen veröffentlichten Daten zur Verkehrssicherheit erweisen sich für die verkehrspolitischen Informationsbedürfnisse und für Zwecke der Unfallforschung häufig nicht als ausreichend. In Absprache mit dem Bundesministerium für Verkehr und der Bundesanstalt für Straßenwesen wurde daher eine Datenbank internationaler Verkehrs- und Unfalldaten aufgebaut. Berichtet wird über die Vorgehensweise bei der Datenbeschaffung und der Aufschlüsselung der Struktur der gespeicherten Daten. Für die Datenpflege und -fortschreibung ist in einer Quellendatenbank zu jeder abgespeicherten Zahl die zugehörige Quelle verzeichnet. Zum Aufbau der Datenbank wurde das Datenbanksystem SIR mit hierarchischem Aufbau verwendet. Nach dem Erreichen eines hinreichenden Ausbauzustandes soll die Datenbank allen Benutzern des Rechenzentrums BMV/BASt offenstehen.
Enhanced protection of pedestrians and cyclists remains on the focus. Besides infrastructural and behavioral aspects it is necessary to exploit technical solutions placed on motorized vehicles. Accident research needs reliable data as well as national road accident statistics. Changing the view on seriously injured road users is one of the challenges which will substantially contribute to the optimization on future traffic safety. The missing accuracy in the definition of personal injury has a detrimental effect on making cost efficient road safety policy which is not only focused on fatal accidents. The European commission requested that, starting in 2015, all EU member states provide more detailed data on the injury status of road casualties, with special regard to the group of seriously injured. Conventional accident data will always be essential. But to obtain detailed data about driver behavior in real traffic situations further data sources are required. These could be EDR data, data from electronic control units, data from traffic surveys and traffic counting, naturalistic diving studies and field operational tests. Gaining insight into normal as well as critical driver behavior will enable accident researchers to deduct functions estimating the increase or decrease of accident risk associated with certain behaviors or vehicle functions. Also with view to the introduction of highly automated driving functions in the future such data is urgently needed. Computer simulation based tools to estimate the benefits of active safety systems are another step on the way towards the safety assessment of automated driving. It is now the duty of the scientific community to ask the right questions, to develop a methodology and to merge all these data sources into a common framework for the assessment of future traffic safety innovations.
The SafetyNet project was formulated in part to address the need for safety oriented European road accident data. One of the main tasks included within the project was the development of a methodology for better understanding of accident causation together with the development of an associated database involving data obtained from on-scene or "nearly onscene" accident investigations. Information from these investigations was complemented by data from follow-up interviews with crash participants to determine critical events and contributory factors to the accident occurrence. A method for classification of accident contributing factors, known as DREAM 3.0, was developed and tested in conjunction with the SafetyNet activities. Collection of data and case analysis for some 1 000 individual crashes have recently been completed and inserted into the database and therefore aggregation analyses of the data are now being undertaken. This paper describes the methodology development, an overview of the database and the initial aggregation analyses.
Since its beginning in 1999, the German In-Depth Accident Study (GIDAS) evolved into the presumably leading representative road traffic accident investigation in Europe, based on the work started in Hanover in 1973. The detailed and comprehensive description of traffic accidents forms an essential basis for vehicle safety research. Due to the ongoing extension of demands of researchers, there is a continuous progress in the techniques and systematic of accident investigation within GIDAS. This paper presents some of the most important developments over the last years. Primary vehicle safety systems are expected to have a significant and increasing influence on reducing accidents. GIDAS therefore began to include and collect active safety parameters as new variables from the year 2005 onwards. This will facilitate to assess the impact of present and future active safety measures. A new system to analyse causation factors of traffic accidents, called ACASS, was implemented in GIDAS in the year 2008. The whole process of data handling was optimised. Since 2005 the on-scene data acquisition is completely conducted with mobile tablet PCs. Comprehensive plausibility checks assure a high data quality. Multi-language codebooks are automatically generated from the database structure itself and interfaces ensure the connection to various database management systems. Members of the consortium can download database and codebook, and synchronize half a terabyte of photographic documentation through a secured online access. With the introduction of the AIS 2005 in the year 2006, some medical categorizations have been revised. To ensure the correct assignment of AIS codes to specific injuries an application based on a diagnostic dictionary was developed. Furthermore a coding tool for the AO classification was introduced. All these enhancements enable GIDAS to be up to date for future research questions.
Um ein zuverlässiges Straßennetz aufrechtzuerhalten, ist es notwendig, neue innovative Ansätze in das Erhaltungsmanagement der Brückenbauwerke im Bundesfernstraßennetz zu integrieren und weiterzuentwickeln. Ergänzend zu den turnusmäßigen Bauwerksprüfungen nach DIN 1076 wird daher ein adaptives Konzept bereitgestellt, das es ermöglichen soll zum einen Zustandsveränderungen frühzeitig zu erfassen und zu bewerten und zum anderen mit Hilfe von erfassten Einwirkungen und Widerständen zukünftige Zustandsentwicklungen zu prognostizieren. Die zu konzipierenden Systeme setzen sich im Wesentlichen aus der Datenerfassung mit Hilfe von Sensorik und den zur echtzeitnahen Verwendung und Bewertung notwendigen Modellen zusammen. Im Rahmen mehrerer Forschungsprojekte wurden einzelne Bausteine eines solchen adaptiven Systems erarbeitet.
Unter dem Begriff "Intelligente Brücke" erfolgt in einem Forschungscluster der Bundesanstalt für Straßenwesen die Entwicklung eines adaptiven Systems zur kontinuierlichen Bereitstellung relevanter Informationen für eine ganzheitliche Zustandsbewertung durch den Einsatz von geeigneter Sensorik in Verbindung mit Analyse- und Bewertungsverfahren. Hierdurch werden online Hinweise auf zu erwartende Schädigungen und Zustandsänderungen ermöglicht. Im Rahmen des digitalen Testfelds Autobahn werden ausgewählte Entwicklungen "Einwirkungsüberwachung", "Instrumentierte Fahrbahnübergänge und Lager" sowie "Sensornetze" an einer Spannbetonbrücke im Autobahnkreuz Nürnberg umfänglich vorgestellt und damit bundesweit zugänglich gemacht. Das Gesamtsystem besteht aus den Komponenten eines Informationssystems zur Analyse und Bewertung von Messdaten instrumentierter Bauteile. Die dabei durchzuführenden Untersuchungen beziehen sich auf die fortlaufende Aktualisierung des objektbezogenen Lastmodells und Analysen zur Restlebensdauer der Brücke sowie der untersuchten Bauteile. Die erfassten und aufbereiteten Informationen werden der zuständigen Straßenbauverwaltung online zur Verfügung gestellt. Das System wird im Rahmen eines fünfjährigen Untersuchungsprogramms betrieben, analysiert und weiterentwickelt.
Die intelligenten Kalottenlager sind durch Messdatenanalyse, Entwicklung geeigneter Algorithmen und Implementierung einer automatisierten Auswertung ein effektiver Baustein einer „Intelligenten Brücke“. Sie liefern kontinuierlich relevante Informationen sowohl zu Eigenüberwachung, Bauwerksüberwachung als auch Einwirkungserfassung. Somit können die Ergebnisse eingebunden werden in Prognose- und Strukturmodelle und schaffen damit eine Grundlage für ein zuverlässigkeitsorientiertes und präventives Erhaltungsmanagement. Zur Selbstüberwachung der Lagerfunktionalität und des Lagerzustands werden Tagesextremwerte der Verschiebung in der ebenen Gleitfläche, der Verdrehung und des Drucks sowie akkumulierte Gleitwege und der Gleitspalt kontinuierlich ausgegeben. Zur Überwachung der Brückeneigenschaften dienen die ersten beiden Eigenfrequenzen sowie die Lagerkraft infolge ständiger Einwirkungen. Die Verkehrseinwirkung wird überwacht anhand der verkehrsinduzierten Lagerkräfte, die in einem täglichen Peak-Histogramm dem Betreiber der Intelligenten Brücke zur Verfügung gestellt werden. Die Auswahl der Sensoren, das Messwerterfassungssystem kombiniert mit den Auswertealgorithmen sind robust und liefern qualitativ hochwertige Messdaten. Z. B. werden verkehrsinduzierten Lagerkräfte mit einer Genauigkeit von ± 7 % des Fahrzeuggesamtgewichts erfasst. Im Jahresrhythmus werden die bemessungsrelevanten Quantilwerte der Lagerreaktionen ermittelt, die Aussagen zur Genauigkeit der normgemäßen Bemessung geben.