Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (18)
- Konferenzveröffentlichung (12)
- Wissenschaftlicher Artikel (5)
- Arbeitspapier (1)
Schlagworte
- Wirtschaftlichkeitsrechnung (36) (entfernen)
Institut
Die Europäische Kommission strebt an, die Zahl der im Straßenverkehr Getöteten in der EU bis zum Jahr 2010 zu halbieren, unter anderem durch den Einsatz von fahrzeuggestützten Notrufsystemen. Ziel der vorliegenden Studie ist es, die spezifischen Rahmenbedingungen in Deutschland für die mögliche Einführung eines fahrzeuggestützten Notrufsystems zu analysieren und eine darauf abgestimmte Umsetzungsempfehlung zu erarbeiten. Methodik: Im Rahmen einer deskriptiven Analyse werden einerseits die deutschen Rahmenbedingungen bezüglich der Straßenverkehrsunfälle sowie der Strukturen und Leistungen des Rettungsdienstes erfasst. Andererseits werden Anforderungen an fahrzeuggestützte Notrufsysteme formuliert und die bestehenden Systemlösungen untersucht. Nach einer Klassifikation der möglichen Systemvarianten werden zwei ausgewählte Systemvarianten mit der Methodik der gesundheitsökonomischen Evaluation (Kosten-Wirksamkeits-Analyse) aus gesellschaftlicher Sicht analysiert. Zur qualitativen Bewertung wird eine Nutzwertanalyse mittels einer Befragung verschiedener Interessengruppen durchgeführt. Ergebnis: Je nach betrachteter Systemvariante und Ausgestaltungsform entstehen Kosten (inklusive Kosteneinsparungen) in Höhe von 1,5 bis 5,5 Milliarden Euro für die Gesellschaft. Werden diese Kosten auf die mit eCall ausgestatteten Fahrzeuge verteilt, ergeben sich rechnerisch pro Fahrzeug Kosten in Höhe von 47 bis 168 Euro. Diesen stehen im Betrachtungszeitraum von zehn Jahren 390 bis 438 gerettete Personen und eine Reduktion der Anzahl der Schwerverletzten um 11.879 bis 13.364 entgegen. Lediglich bei der kostengünstigsten Ausgestaltungsform des eCall-Systems im Fahrzeug als integrierte Lösung können die Kosteneinsparungen die Kosten für die Gesellschaft übersteigen. Unter monetär bewerteten Kosten- und Nutzengesichtspunkten aus gesamtgesellschaftlicher Perspektive kommt der organisatorischen Ausgestaltungsform des Systems (zentral/dezentral) keine Bedeutung zu. Im Rahmen der Nutzwertanalyse konnte bei den unterschiedlichen Interessengruppen keine eindeutige Präferenz für eine der Systemvarianten festgestellt werden. Die Vertreter der Automobilindustrie, der Medizin, der Politik/Gesellschaft, des Rettungsdienstes und der Wissenschaft bevorzugen die Systemvariante, bei der die Erstbearbeitung der Notrufe in den dezentral organisierten Rettungsleitstellen erfolgt. Die Vertreter der Automobil-Zulieferindustrie, der Serviceprovider und der Versicherungen ziehen die Systemvariante vor, die auf einer zentralen Erstbearbeitung der Notrufe beruht. Fazit: Die Einführung eines fahrzeuggestützten Notrufsystems in Deutschland ist mit hohen gesellschaftlichen Kosten verbunden, die in der Basisbetrachtung mit realistischen Annahmen deutlich über dem monetär bewerteten Nutzenpotenzial liegen. In der vorliegenden Evaluation wird deutlich, dass Kosteneinsparungen für die Gesellschaft auch bei optimistischen Nutzenannahmen in Bezug auf die Wirksamkeit zur Reduzierung der Getöteten und Schwerverletzten im Straßenverkehr nur bei den kostengünstigsten Varianten von fahrzeuggestützten Notrufsystemen realisierbar sind. Im Rahmen dieser Studie kann deshalb für die europaweite Einführung von fahrzeuggestützten Notrufsystemen nur die kostengünstigere Variante empfohlen werden, die in den Fahrzeugen bereits vorhandene Module (zum Beispiel GNSS-Systeme und das Mobilfunktelefon der Insassen) einbezieht. Eine freiwillige Markteinführung der Systeme würde dazu führen, dass eCall-Systeme insbesondere dann in Fahrzeugen integriert werden, wenn dafür geringe Mehrkosten anfallen oder wenn Risikogruppen ihren Nutzen besonders hoch einschätzen. Bei einem derartigen Implementierungsszenario würden damit die Kosten, die den Systemen zuzurechnen sind, sinken, da vorhandene Technik im Fahrzeug genutzt wird. Bei einer freiwilligen Einführung von fahrzeuggestützten Notrufsystemen in Deutschland wird letztlich der Nutzer über den Erfolg von eCall entscheiden.
Research to inform policy is often challenged with how to genuinely use and implement research findings in decision-making and policy-planning. To begin with, the dialogue between researchers and decision-makers is essential to ensure profound understanding and legitimate interpretations of the results. Furthermore, the step to drawing practical conclusions and processing them into actions can only succeed if research findings are diffused to decision-making levels with influence on the matter, and mechanisms to knowledge transfer in the presence of a stable, favourable policy environment exist. Research investments into the topic of electromobility in Europe are substantial, and subtopics aiming to inform national policy-makers address a complex set of aspects from environmental and societal to technological and economic. This paper has a two-fold objective, the first of which is to present the results of scenarios to explore electromobility deployment in Finland, Germany and the European Union. The second is to discuss the challenges and solutions to bridge the gap from research findings towards decision-making and policy-planning, using the authors' electromobility scenario work as an example. The electromobility scenarios were built using the VECTOR21 model (Mock, 2010), and the rationale was to simulate vehicle sales and markets under different policy settings and calculate the most economical solution to fulfill regulation on COâ‚‚ emissions as set by the European Commission (2009). The model allows calculating the market diffusion of alternative powertrain technologies to the European market until 2030, taking into account different taxation schemes, incentives and other country-specific characteristics. The authors also present the cost-benefit-analysis of the modelling results to assess the different scenarios and to show variation between regions regarding profitability of alternative technological or political support and interventions. To proceed from research findings towards decision-making and policy-planning, the authors made observations relating to transfer of research knowledge and interpretation of their electromobility scenario results in national policy contexts. An evaluation of how the function of research to inform policy in this case succeeded is provided. In addition, the influence of expert opinions on the political decision-making process will be discussed through experiences from an expert questionnaire conducted to survey the importance of costs, time requirement, acceptance and other criteria of promotion measures of electromobility.
Ziel des Forschungsvorhabens war die Untersuchung des Einflusses einzelner Zustandsparameter auf das Unfallgeschehen unter Berücksichtigung von Verkehrs- und Infrastrukturmerkmalen. Durch die Zusammenführung von Informationen aus den beiden Netzanalysesystemen "Zustandserfassung und -bewertung" (ZEB) und der (Empfehlungen für die) "Sicherheitsanalyse von Straßennetzen" (ESN) sollten Verbesserungspotenziale für die Optimierung des Sicherheitsmanagement der Straßeninfrastruktur abgeleitet werden. Daten aus drei Analyseländern für Bundesautobahnen sowie Bundes- und Landesstraßen wurden datentechnisch durch neu geschaffene Aggregations- und Auswerteverfahren auf ein gemeinsames Netzmodell aufbereitet. In Pilotanalysen wurden deskriptive Auswertungen des Unfallgeschehens und der Zustandsparameter durchgeführt. Verschiedene Analysemethoden für die Quantifizierung eines Zustandseinflusses auf das Unfallgeschehen wurden vergleichend gegenübergestellt und zentrale Randbedingungen (z. B. Abschnittslängen, Verteilungskennwerte der Zustandsparameter) definiert. Anhand multikriterieller Analyseansätze wurden Zusammenhänge zwischen Zustandsgrößen (z. B. Griffigkeit, Quer- und Längsebenheit), Infrastrukturparametern (z. B. Fahrstreifenanzahl, Längs- und Querneigung oder Kurvigkeitsäquivalent), den Verkehrsmengen und dem Unfallgeschehen modellhaft beschrieben. Für die Griffigkeit lassen sich signifikante und verallgemeinerbare Zusammenhänge mit Fahr- und Längsverkehrsunfälle auf Bundes- und Landesstraßen ableiten. Bei den übrigen untersuchten Zustandsgrößen " z. B. Ebenheit in Längs und Querrichtung " ergaben sich keine einheitlichen Ergebnisse. Aus den Modellen wurde ein allgemeingültiges Verfahren entwickelt, welches vermeidbare Unfallkosten pro Jahr für Veränderungen in der Griffigkeit bei gegebenen Infrastrukturgrößen abschätzt. Das dargestellte DV-Verfahren ermöglicht den bidirektionalen Datenaustausch zwischen der ZEB und der ESN und die Berücksichtigung der zusammengeführten Informationen im Rahmen des Erhaltungsmanagements.
Seit Ende der 80iger Jahre sind in Deutschland eine ganze Reihe von automatisch gesteuerten Verkehrsbeeinflussungsanlagen (VBA) im Einsatz. Das Bundesministerium für Verkehr, Bau und Stadtentwicklung hat den Bau in den 90er Jahren stark forciert und in einem Rahmenprogramm gefördert. Vor diesem Hintergrund soll untersucht werden, welche Nutzen und Kosten solche Anlagen im Zuge ihres Lebenszyklus' implizieren. Ziel der vorliegenden Arbeit war es deshalb, aufzuzeigen, wie sich solche Nutzen/Kosten-Verhältnisse präzisieren lassen, wenn der gesamte Lebenszyklus einer VBA betrachtet wird. Im Rahmen einer Befragung von Betreibern solcher Anlagen wurden die Kosten der verschiedenen Lebensphasen erhoben. Es zeigte sich, dass sich für verschiedene Anlagentypen auch sehr unterschiedliche Verteilungen der Kostenanteile für die einzelnen Lebensphasen ergaben. Die Berechnung der Nutzen erfolgt auf der Basis bereits in anderen Forschungsvorhaben und im Rahmen der Arbeitskreise der Forschungsgesellschaft für Straßen- und Verkehrswesen entwickelten Methoden und Modelle. Die so ermittelten Kostensätze und Nutzen dienen als Grundlage für Lifecycle-Tools, mit deren Hilfe eine Gesamtbewertung einer beliebigen VBA über den gesamten Lebenszyklus erstellt werden kann. In diese Lifecycle-Tools eingebunden sind die Excel-Tools der Technischen Universität München. Für die Wirksamkeitsberechnung von TSF wurde das AVP-Programm zugrunde gelegt. Anwendungen der Tools auf drei exemplarischen Anlagen zeigten, dass sich bei der Lebenszyklusbetrachtung grundsätzlich höhere Nutzen/Kosten-Verhältnisse ergeben als bei der bisherigen Betrachtungsweise. Mit den Lifecycle-Tools für VBAn steht dem Anwender ein Instrumentarium zur Verfügung, mit dessen Hilfe er innerhalb weniger Minuten eine Nutzen/Kosten-Abschätzung für den entsprechenden Anlagentyp über den gesamten Lebenszyklus vornehmen kann.
At the beginning of the year 2000 the European Commission set the goal to halve the number of road deaths till the year 2010. The main focus are passenger car and lorry traffic. A significant reduction of the accident data could be reached in these groups. The advancement of active vehicle safety systems is an important issue of the programme. The safety of the motorcycle traffic has been disregarded till now. Since 1991 the number of killed motorcycle riders per year has been constant. The number of killed passenger car occupants has been more than halved in the same period. This is why initiatives are caused for the increase of the motorcycle safety. A great safety potential is expected for the Antilock Brake System (ABS). ABS for motorcycles is considered from the economic view in this study. A cost-benefit analysis shall clarify whether the economic benefit of ABS for motorcycles is greater than the consumed resources. Moreover, a sensitivity analysis will determine the maximal justifiable consumption in resource for which ABS is worthwhile. After the sensitivity analysis is done a break-even analysis will determine the market price respectively the annual mileage from which on ABS is worthwhile on user level. For this the fair end consumer market price is calculated which the user is ready to pay. For the considered market prices the annual mileage is determined from which on ABS is worthwhile for the user. The considered time horizon for this analysis are the years 2015 and 2020. For each of these years the accident data is forecasted. At this, it is assumed that the frequency of having an accident per million registered motorcycles decreases based on the present trend. Thus, riding motorcycle gets safer. Hence, the accident data in the years 2015 and 2020 is lower than the accident data today. The cost-benefit analysis is done for each year for four scenarios. Two scenarios handle the market penetration. The first one is the trend scenario, the second one is the mandatory equipment from the year 2010 on. The other scenarios describe the effectiveness of ABS. The effectiveness rates are determined by a literature review. The only potential which can be considered due to the available data is the potential due to an avoiding of the downfall just before the real accident happens. According to this the number of accidents will decrease by 2.4 %. The number of fatalities will decrease by 12.1 %. The number of severe injuries decreases by 11.7 %. However, the number of slight injuries increases by 2.1 %. The mentioned effectiveness rates are valid for the scenarios with the high effectiveness. Even these figures underestimate the actual effectiveness because there are only considered the avoided accidents with downfall. The necessary consumption in resources depends on the produced volume. The more ABS systems are produced, the lower are the costs per system. This is due to realised effects of scale and effects out of learning curves. The system costs depend on the penetration rate. In the trend scenario the system costs for ABS are 120 Euro for the year 2015 respectively 105 Euro for the year 2020. In the mandatory scenario the system costs are 115 Euro for the year 2015 respectively 100 Euro for the year 2020. The benefit-cost ratios are all over the critical barrier of 1.0. Thus, ABS is worthwhile on economic level. In the scenarios with high effectiveness the benefit-cost ratios range between 4.6 and 4.9. Thus, the values are even above the barrier of 3.0. The result of the break-even analysis is that ABS is worthwhile on user level. The considered market prices are 400 Euro in 2015 and 300 Euro in 2020. They are clearly below the determined fair end consumer market prices. The fair end consumer price for the year 2015 is 701 Euro respectively 622 Euro for the year 2020. Thus, ABS is worthwhile for motorcycle riders with an annual mileage higher than 2,200 km (year 2015) respectively 1,900 km (year 2020). The annual mileage of a motorcycle rider is 3,900 km on average. Thus, ABS is worthwhile for most of the motorcycle riders. The mentioned results are valid for the high effectiveness scenarios.
This work aims at bringing evidence for mass incompatibility in frontal impact for cars built according to the UNECE R94 regulation. French national injury accidents database census for years 2005 to 2008 were used for the analysis. The heterogeneity of frontal self-protection among cars of different masses is investigated, as well as the partner protection parameter offered by these cars. The last part of the analysis deals with the estimation of the benefit, in terms of fatal and severe injuries avoided, if crashworthiness was harmonized for the whole fleet of vehicle. This calculation is done for France and is extended to all Europe.
Es wird über die nichttechnische Begleitforschung zum Autonotfunk berichtet. Die Wirkung des Autonotfunks im Rettungswesen wird abgeschätzt und eine zusammenfassende Beurteilung des Systems vorgenommen. Aus den Wirkungen wird abgeleitet, dass durch die Verkürzung der Rettungszeit um eine Minute zwischen 0,26 und 0,66 Prozent der Unfalltoten vermieden werden können. Bei einer Ausstattungsquote von 10 Prozent aller Kraftfahrzeuge werden Investitionskosten von 700 Millionen DM berechnet, für die Relaisstellen bei etwa 4.000 Anlagen ca. 1,1 Milliarde DM. Hinsichtlich der Wirtschaftlichkeit wird bei einer 5- bis 10 prozentigen Ausstattung mit Mobilgeräten ein in etwa ausgeglichenes Nutzen/Kostenverhältnis erwartet. Die Projektgruppe empfiehlt mehrheitlich die bundesweite Einführung des Autonotfunks.
Die UNECE Regelung R58 regelt die Beschaffenheit und die Installation von Heckunterfahrschutzsystemen an schweren Güterkraftfahrzeugen, deren Ziel die Verbesserung der Kompabilität zwischen Pkw-Frontstrukturen und Lkw-Hecks ist. Dennoch verunglücken laut amtlicher Unfallstatistik allein in Deutschland rund 30 Pkw-Insassen in Heckauffahrunfällen auf Lkw tödlich, da diese Vorrichtungen hinsichtlich Einbauhöhe und Steifigkeit den Anforderungen des realen Unfallgeschehens nicht genügen. Das Ziel dieser Studie ist eine quantitative Abschätzung der möglichen Reduzierung der Verletzungsschwere mit Hilfe eines statistischen Modells, die durch eine Anpassung der geltenden Bestimmungen und die damit verbundenen technischen Veränderungen des bereits vorgeschriebenen Heckunterfahrschutzes zu erreichen wäre. In einer Nutzen-Kosten-Analyse wird die Wirtschaftlichkeit dieser Modifizierungen mit einem idealen Notbremsassistenten verglichen. Die Untersuchung orientiert sich dabei an den aktuell in der UN-ECE WP29/GRSG in Genf diskutierten Vorschlägen zur Anpassung der ECE-R58. Das verwendete ordinale Probit-Modell stellt einen Zusammenhang zwischen der Verletzungsschwere im auffahrenden PKW und erklärenden Größen her, in diesem Fall der kinetischen Energie des unterfahrenden Pkws und der strukturellen lnteraktion zwischen Lkw-Heck und Pkw-Front. Diese Maßnahmen könnten demnach 53 - 78% der Getöteten sowie 27 - 49% der Schwerverletzten bei diesen Unfallkonstellationen reduzieren, was pro Jahr 20 Getöteten und 95 Schwerverletzten entsprechen würde. Somit würde eine Modifikation einer bestehenden passiven Schutzmaßnahme an jährlich 100.000 neuzugelassenen Lkw und Anhängern bereits 20 Getötete adressieren. Im Vergleich dazu müssten jährlich 3 Millionen Pkw mit zusätzlicher Sensorik und Aktuatorik für einen idealen Notbremsassistenten ausgestattet werden, um im Idealfall alle Heckauffahrunfälle von Pkw auf andere Pkw oder Lkw und damit 53 Getötete zu vermeiden. Daher fällt auch das Nutzen-Kosten-Verhältnis deutlich zugunsten des verbesserten Heckunterfahrschutzes aus.
Although the number of road accident casualties in Europe (EU27) is falling the problem still remains substantial. In 2011 there were still over 30,000 road accident fatalities. Approximately half of these were car occupants and about 60 percent of these occurred in frontal impacts. The next stage to improve a car's safety performance in frontal impacts is to improve its compatibility. The objective of the FIMCAR FP7 EU-project was to develop an assessment approach suitable for regulatory application to control a car's frontal impact and compatibility crash performance and perform an associated cost benefit analysis for its implementation. This paper reports the cost benefit analyses performed to estimate the effect of the following potential changes to the frontal impact regulation: • Option 1 " No change and allow current measures to propagate throughout the vehicle fleet. • Option 2 " Add a full width test to the current offset Deformable Barrier (ODB) test. • Option 3 " Add a full width test and replace the current ODB test with a Progressive Deformable Barrier (PDB) test. For the analyses national data were used from Great Britain (STATS 19) and from Germany (German Federal Statistical Office). In addition in-depth real word crash data were used from CCIS (Great Britain) and GIDAS (Germany). To estimate the benefit a generalised linear model, an injury reduction model and a matched pairs modelling approach were applied. The benefits were estimated to be: for Option 1 "No change" about 2.0%; for Option 2 "FW test" ranging from 5 to 12% and for Option 3 "FW and PDB tests" 9 to 14% of car occupant killed and seriously injured casualties.
Autonomous Emergency Braking (AEB) systems for pedestrians have been predicted to offer substantial benefit. On this basis, consumer rating programmes, e.g. Euro NCAP, are developing rating schemes to encourage fitment of these systems. One of the questions that needs to be answered to do this fully, is to determine how the assessment of the speed reduction offered by the AEB is integrated with the current assessment of the passive safety for mitigation of pedestrian injury. Ideally, this should be done on a benefit related basis. The objective of this research was to develop a benefit based methodology for assessment of integrated pedestrian protection systems with pre-crash braking and passive safety components. A methodology has been developed which calculates the cost of pedestrian injury expected, assuming all pedestrians in the target population (i.e. pedestrians impacted by the front of a passenger car) are impacted by the car being assessed, taking into account the impact speed reduction offered by the car’s AEB (if fitted) and the passive safety protection offered by the car’s frontal structure. For rating purposes, this cost can be normalised by comparing it to the cost calculated for selected cars. The methodology uses the speed reductions measured in AEB tests to determine the speed at which each casualty in the target population will be impacted. The injury to each casualty is then calculated using the results from standard Euro NCAP pedestrian impactor tests and injury risk curves. This injury is converted into cost using ‘Harm’ type costs for the body regions tested. These costs are weighted and summed. Weighting factors were determined using accident data from Germany and GB and the results of a benefit analysis performed by the EU FP7 AsPeCSS project. This resulted in German and GB versions of the methodology. The methodology was used to assess cars with good, average and poor Euro NCAP pedestrian ratings, with and without a current AEB system fitted. It was found that the decrease in casualty injury cost achieved by fitting an AEB system was approximately equivalent to that achieved by increasing the passive safety rating from poor to average. Also, it was found that the assessment was influenced strongly by the level of head protection offered in the scuttle and windscreen area because this is where head impact occurs for a large proportion of casualties. The major limitation within the methodology is the assumption used implicitly during weighting. This is that the cost of casualty injuries to body areas, such as the thorax, not assessed by the headform and legform impactors, and other casualty injuries such as those caused by ground impact, are related linearly to the cost of casualty injuries assessed by the impactors. A methodology for assessment of integrated pedestrian protection systems was developed. This methodology is of interest to consumer rating programmes which wish to include assessment of these systems. It also raises the interesting issue if the head impact test area should be weighted to reflect better real-world benefit.