Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (70)
- Buch (Monographie) (45)
- Wissenschaftlicher Artikel (4)
- Bericht (1)
- Arbeitspapier (1)
Schlagworte
- Analysis (math) (121) (entfernen)
Institut
Cyclists are more likely to be injured in fatal crashes than motorised vehicles. To gain detailed and precise behavioural data of road users, i.e. trajectories, a measuring campaign was conducted. Therefore, a black-spot for accidents with cyclists in Berlin, Germany was selected. The traffic has been detected by a fully automated traffic video analysis system continuously for twelve hours. The video surveillance system is capable of automatically extracting trajectories, classifying road user types and precise determining and positioning of conflicts and accidents. Additionally, pre-conflict and pre-accident situations could be analysed to provide further in-depth understanding of accident causation. The evaluation of the measuring campaign comprised the investigation of traffic parameters, e.g. traffic flow, as well as traffic-safety related parameters based on Surrogate Safety Measures (SSM). Furthermore, the spatial and temporal distributions of conflicts involving cyclists were determined. As a result, three possible conflict clusters could be identified, of which one cluster could be confirmed by detailed video analysis, showing conflicts caused by right turning vehicles.
Car occupants have a high level of mortality in road accidents, since passenger cars are the prevalent mode of transport. In 2013, car occupant fatalities accounted for 45% of all road accident fatalities in the EU. The objective of this research is the analysis of basic road safety parameters related to car occupants in the European countries over a period of 10 years (2004-2013), through the exploitation of the EU CARE database with disaggregate data on road accidents. Data from the EU Injury Database for the period 2005 - 2008 are used to identify injury patterns, and additional insight into accident causation for car occupants is offered through the use of in-depth accident data from the EC SafetyNet project Accident Causation System (SNACS). The results of the analysis allow for a better understanding of the car occupants' safety situation in Europe, thus providing useful support to decision makers working for the improvement of road safety level in Europe.
To elucidate the risk of pedestrians, bicycle and motorbike users, data of two accident research units from 1999 to 2014 were analysed in regard to demographic data, collision details, preclinical and clinical data using SPSS. 14.295 injured vulnerable road users were included. 92 out of 3610 pedestrians ("P", 2.5%), 90 out of 8307 bicyclists ("B", 1.1%) and 115 out of 4094 motorcycle users ("M", 2.8%) were diagnosed with spinal fractures. Thoracic fractures were most frequent ahead of lumbar and cervical fractures. Car collisions were most frequent mechanism (68, 62 and 36%). MAIS was 3.8, 2.8 and 3.2 for P, B and A with ISS 32, 16 and 23. AIS-head was 2.2, 1.3 and 1.5). Vulnerable road users are at significant risk for spine fractures. These are often associated with severe additional injuries, e.g. the head and a very high overall trauma severity (polytrauma).
Powered Two Wheeler (Motorcycle) crashes are overrepresented in EU, England, and United States casualty statistics for both fatal and serious injuries. While regional geographic differences are evident for motorcycle size, type, and engine displacement, the casualty statistics consistently indicate significantly higher injury rates for all motorcycle riders when compared to car occupants. Accident analysis and reconstruction of these motorcycle crashes is a necessary process to gain further understanding of potential injury mitigation strategies. This paper focuses on the analysis of the rider post impact trajectory in the immediate moments following a crash. The rider and motorcycle, while loosely coupled by seating position leading up to a crash, quickly decouple as the crash forces develop. As a result, the rider moves relative to the motorcycle and relative to the collision partner. This movement, or trajectory, is primarily influenced by the type and configuration of the impact, the type and configuration of the motorcycle and collision partner, and the speeds involved. Understanding the rider's post impact trajectory will assist in the development of injury mitigation strategies. Both the free flight trajectory of the rider and the rider's trajectory as influenced by interaction with the motorcycle and collision partner are examined. Rider trajectories in full scale crash testing and real world motorcycle crashes are both studied and presented. The resulting physical evidence that can be observed by an accident analyst is discussed. The application of projectile motion physics is analyzed and the necessary input parameters, such as initial launch angle, are studied. This study will assist in understanding the post-impact dynamics of a motorcyclist, and will provide useful information to analysts evaluating real world crashes.
Motorcycle crashes in Austria: Analysis of causes and contributing factors based on in-depth data
(2017)
From CEDATU, the in-depth accident database run by the Vehicle Safety Institute at Graz University of Technology, a representative sample of 101 crashes involving at least one motorcycle was selected. The analysis focused on causes for crashes as well as on contributing factors, but also included parameters of road, riders and vehicles. Own riding speed and "unexpectable action by another road user" were the most frequent causes for accidents. Inappropriate safety distance or delayed reaction were frequent, both as causation factors and as contributing factors. Infrastructure issues never cause an accident, but they are very frequent as contributing factors; road geometry and road guidance are by far most frequent among these. This paper also discusses accidents by type and other parameters (e.g. injury severity by body region, collision speed, age and others), and compares accident causes to previous studies as well as the police reported accident statistics.
In most of developed countries, the progress made in passive safety during the last three decades allowed to drastically reduce the number of killed and severely injured especially for occupants of passenger cars. This reduction is mainly observed for frontal impacts for which the AIS3+ injuries has been reduced about 52% for drivers and 38% for front passengers. The stiffening of the cars' structure coupled with the generalization of airbags and the improvement of the seatbelt restraint (load limiter, pretension, etc.) allowed to protect vital body regions such as head, neck and thorax. However, the abdomen did not take advantage with so much success of this progress. The objective of this study is to draw up an inventory on the abdominal injuries of the belted car occupants involved in frontal impact, to present adapted counter-measures and to assess their potential effectiveness. In the first part the stakes corresponding to the abdominal injuries will be defined according to types of impact, seat location, occupants' age and type of injured organs. Then, we shall focus on the abdominal injury risk curves for adults involved in frontal impact and on the comparisons of the average risks according to the seat location. In the second part we will list counter-measures and we shall calculate their effectiveness. The method of case control will be used in order to estimate odds ratio, comparing two samples, given by occupants having or not having the studied safety system. For this study, two type of data sources are used: national road injured accident census and retrospective in-depth accident data collection. Abdominal injuries are mainly observed in frontal impact (52%). Fatal or severe abdominal occupant- injuries are observed at least in 27% of cases, ranking this body region as the most injured just after the thorax (51%). In spite of a twice lower occupation rate in the back seats compared to the front seats, the number of persons sustaining abdominal injuries at the rear place is higher than in the front place. In recent cars, the risk of having a serious or fatal abdominal injury in a frontal impact is 1.6% for the driver, 3.6% for the front passenger and 6.3% for the rear occupants. The most frequently hurt organs are the small intestine (17%), the spleen (16%) and the liver (13%). The most common countermeasures have a good efficiency in the reduction of the abdominal injuries for the adults: the stiffness of the structure of the seats allows decreasing the abdominal injury risk from 54% (driver) to 60% (front occupant), the seatbelt pretensioners decrease also this risk from 90% (driver) to 83% (front passenger).
Millions of kilometers are driven and recorded by car manufacturers and researchers every year to gather information about realistic traffic situations. The focus of these studies is often the recording of critical situations to create test scenarios for the development of new systems before introducing them into the market. This paper shows a novel Analysis and Investigation Method for All Traffic Scenarios (AIMATS) based on real traffic scenes. It also shows how to get detailed information about speeds, trajectories and behavior of all participants without driving thousands of kilometers at the example of conflict situations with animals. Basis of the AIMATS is the identification of the most relevant locations as "Points of Interest" (POI), the recording of the critical situations and their "base lines" at these POI. This paper presents a new method to identify critical scenarios involving both vehicles and animals as well as preliminary results of a study done in Saxony using this new method.
Das Sicherheitsaudit stellt einen wesentlichen Bestandteil des Sicherheitsmanagements von Straßen in der Planungsphase dar. Ein aktueller systematischer Überblick über die Auditpraxis in den Ländern sowie über die Verbreitung in Kommunen lag jedoch bisher nicht vor. Ziel war es daher, zunächst Wissenslücken bezüglich der tatsächlichen Anwendung und der organisatorischen Verankerung des Sicherheitsaudits zu schließen. Hierfür erfolgten zunächst eine Recherche zur Anwendung von Sicherheitsaudits auf Länder- und kommunaler Ebene sowie eine Erhebung zu durchgeführten Audits. In diesem Zusammenhang erfolgte auch ein Erfahrungsaustausch mit Auditoren von Straßenbauverwaltungen der Länder sowie mit Auditoren von Stadtverwaltungen. Darüber hinaus wurden jeweils 200 Auditberichte zu außer- und innerörtlichen Maßnahmen einschließlich der zugehörigen Stellungnahmen ausgewertet. Darauf aufbauend erfolgte die detaillierte Untersuchung ausgewählter auditierter Maßnahmen, die bereits realisiert und unter Verkehr waren und für die ein Unfallgeschehen von mindestens drei Jahren nach Verkehrsfreigabe vorlag. Während die Gespräche zum Erfahrungsaustausch weitestgehend übereinstimmende Aussagen im Hinblick auf die Auditierung von außer- und innerörtlichen Maßnahmen erbracht haben, haben die Auswertungen der jeweils 200 Audits wie auch die Detailauswertung der Audits von Außerorts- und Innerortsstraßen zu unterschiedlichen Erkenntnissen geführt. Abschließend wurden Empfehlungen zur Weiterentwicklung der Auditpraxis in Deutschland sowie zur Übernahme in die Fortschreibung der ESAS abgeleitet. Der wesentliche Baustein im Zusammenhang mit der Fortschreibung der ESAS war die Erarbeitung von Defizitlisten, die zukünftig in elektronischer Form zur Verfügung stehen sollen und anhand derer ein Audit auf Vollständigkeit überprüft werden kann. Ferner sollen sie für eine Dokumentation und Auswertung der Auditergebnisse genutzt werden können.
Für das Forschungsvorhaben wurden Performance-Kennwerte in den Phasen der Asphaltmischgutkonzeption, Asphaltmischgutproduktion und nach dem Asphalteinbau an 21 Baumaßnahmen für die Asphaltdeck-, -binder- und -tragschicht systematisch erfasst und ausgewertet. Als Performance-Kennwerte dienten die Ergebnisse aus den Prüfungen zur Steifigkeit, zum Widerstand gegen Kälterissbildung, zum Ermüdungs- und Verformungs-widerstand sowie zur Griffigkeitsentwicklung. Die Untersuchungen lieferten wichtige Erkenntnisse und Tendenzen bei einzelnen Performance-Kennwerten, die bereits jetzt für zwei methodische Ansätze zur Festlegung künftiger vertragsrelevanter Anforderungen genutzt werden konnten: Einerseits wurde ein Vorschlag für eine spezifische Kategorisierung von Performance-Kennwerten innerhalb der europäischen Normung aufgezeigt, andererseits konnte mit Hilfe multipler linearer Regressionsanalysen ein möglicher Weg zur Abschätzung von Performance-Kenngrößen der fertigen Schicht aus der Erstprüfung aufgezeigt werden, sodass Anforderungswerte vorab definiert werden können. Zudem zeigte sich, dass, auch wenn im Wesentlichen die Ergebnisse der konventionellen Asphaltkontrollprüfungen die Anforderungen der ZTV Asphalt erfüllen, es nicht sichergestellt ist, dass Nutzungsdauern von mindestens 30 Jahren erreicht werden können. Dies resultiert im Wesentlichen aus den Unterschieden der Performance-Kenngrößen der drei Phasen, vor allem der Ermüdungsversuche. Deshalb wurden für die Modifikation des Sicherheitskonzeptes für die rechnerische Dimensionierung zwei Ansätze vorgestellt. Es erscheint aber zwingend erforderlich, dass durch weitere Untersuchungen die erstellte Datenbank ergänzt wird. Zudem sollten die im Projekt untersuchten Strecken einer weiteren Beobachtung unterzogen werden, um den Prozess der Alterung erfassen zu können. Damit kann auch eine Validierung des Dimensionierungsverfahrens erfolgen.
At the end of each year, the German Federal Highway Research Institute (BASt) publishes the road safety balance of the closing year. They describe the development of accident and casualty numbers disaggregated by road user types, age groups, type of road and the consequences of the accidents. However, at the time of publishing, these series are only available for the first eight or nine months of the year. To make the balance for the whole year, the last three or four months are forecasted. The objective of this study was to improve the accuracy of these forecasts through structural time-series models that include effects of meteorological conditions. The results show that, compared to the earlier heuristic approach, root mean squared errors are reduced by up to 55% and only two out of the 27 different data series yield a modest rise of prediction errors. With the exception of four data series, prediction accuracies also clearly improve incorporating meteorological data in the analysis. We conclude that our approach provides a valid alternative to provide input to policy makers in Germany.
Zur Ermittlung einer Mehr- oder Minderbeanspruchung des Straßenoberbaus durch Lang-Lkw wurde im Rahmen der zweiten Untersuchungsstufe zu dieser Problematik eine Stichprobe von 23.639 Fahrten von Lang-Lkw im Direktverkehr und 463 Fahrten im kombinierten Verkehr analysiert. Die durchschnittliche Fahrzeuggesamtmasse der Lang-Lkw betrug 33,2 t. Ca. 6,5 % der Lang-Lkw fuhren überladen, was im Vergleich zum konventionellen Schwerverkehr auf Bundesautobahnen mit ca. 20 % einen relativ niedrigen Anteil darstellt. Im Vergleich zur ersten Untersuchungsstufe wurde die Tendenz zur Reduzierung der Achsanzahl von Lang-Lkw festgestellt. Die Fahrt eines Lang-Lkw ersetzt ca. 1,5 Fahrten eines äquivalenten konventionellen Lkw. Hinsichtlich der Dimensionierungsparameter nach RStO 12 liefern Lang-Lkw marginal bessere Werte als äquivalente konventionelle Lkw, so dass bei Substitution eines Teils konventioneller Lkw durch Lang-Lkw in der Regel keine Änderung der Belastungsklasse eintreten würde. Das Dimensionierungsverfahren nach RDO Asphalt 09 ergibt bei teilweisem Einsatz von Lang-Lkw innerhalb des Gesamtkollektivs Schwerverkehr auf Bundesautobahnen eine marginale Verlängerung der Regelnutzungsdauer von 30 Jahren um ca. 2 % auf ca. 30,5 Jahre. Die Ergebnisse der Untersuchung bestätigen grundsätzlich die Resultate der ersten Untersuchung. Der Einsatz von Lang-Lkw bedingt unter Einhaltung der im Feldversuch definierten fahrzeugtechnischen Vorgaben und zulässigen Grenzwerte für Fahrzeuggesamtgewichte und Achslasten keine Mehrbeanspruchung des Oberbaus von Straßen. Die rechnerisch ermittelte Minderbeanspruchung des Oberbaus im Vergleich zu konventionellen Lkw hat nur marginale Bedeutung und würde sich somit in der Praxis kaum spürbar auf die Nutzungsdauer der Straßen auswirken. Bei weiterer Reduzierung der mittleren Achsanzahl von Lang-Lkw würde sich die Beanspruchung des Straßenoberbaus durch Lang-Lkw jedoch signifikant erhöhen.