Konferenzveröffentlichung
Filtern
Erscheinungsjahr
- 2013 (82)
- 2017 (64)
- 2010 (63)
- 2015 (56)
- 2009 (54)
- 2007 (52)
- 2005 (46)
- 2008 (45)
- 2019 (23)
- 2014 (21)
- 2011 (19)
- 1998 (17)
- 2016 (17)
- 2001 (13)
- 2000 (9)
- 2003 (9)
- 1983 (6)
- 1985 (5)
- 1987 (5)
- 2004 (5)
- 1989 (3)
- 1997 (3)
- 2002 (3)
- 2012 (3)
- 1988 (2)
- 1992 (2)
- 1996 (2)
- 1999 (2)
- 2018 (2)
- 2021 (2)
- 1995 (1)
- 2022 (1)
Dokumenttyp
- Konferenzveröffentlichung (637) (entfernen)
Schlagworte
- Conference (386)
- Konferenz (382)
- Germany (212)
- Deutschland (209)
- Unfall (188)
- Accident (187)
- Safety (123)
- Sicherheit (122)
- Injury (117)
- Verletzung (117)
Institut
Der Beitrag setzt sich mit folgenden Fragestellungen auseinander: 1. Stellen ältere Kraftfahrer ein Sicherheitsrisiko für den Straßenverkehr dar? 2. Wie wurden diese Frage und die "Fahreignung und Fahrtüchtigkeit älterer Kraftfahrer" in den vergangenen 50 Jahren wissenschaftlich bewertet - insbesondere bei Kongressen der Deutschen Gesellschaft für Verkehrsmedizin und den Deutschen Verkehrsgerichtstagen? 3. Wie haben in den vergangenen 50 Jahren Juristen, Behörden und Gesetzgeber die "Fahreignung älterer Kraftfahrer" gesehen und umgesetzt? 4. Werden morbiditäts- und altersbedingte Beeinträchtigungen der Leistungsfähigkeit rechtzeitig und richtig durch ältere Kraftfahrer erkannt? 5. Wie gehen ältere Kraftfahrer mit erkannten Leistungsmängeln um? 6. Benötigen ältere Verkehrsteilnehmer Aufklärung, Beratung, Fortbildung und Vorsorge- oder Kontrolluntersuchungen? Insgesamt kann festgestellt werden, dass allein aus normalem Altersabbau und hohem Alter kein Rückschluss auf die Fahruntauglichkeit gezogen werden kann. Das wichtigste gesellschaftliche Ziel für die Teilnahme älterer Menschen am Straßenverkehr ist - angesichts der demographischen Entwicklung - die Einsichtsfähigkeit in das altersbedingt verminderte Leistungsvermögen und den Veränderungswillen zu Kompensationsmechanismen bei älteren Verkehrsteilnehmern zu schärfen. Der behandelnde Arzt, Angehörige und sonstige Bezugspersonen sollten alles tun, um den bejahrten Kraftfahrer zu motivieren, sich seiner Selbstverantwortung bewusst zu werden und demgemäß zu handeln.
Es wird ein Überblick zur Thematik Lärm an Fahrbahnübergängen mit technischen Entwicklungen zur Lärmminderung gegeben. Dabei wird eingegangen auf die Anforderungen und Einsatzkriterien von Fahrbahnübergängen, aktuelle Forschungsvorhaben und -ergebnisse sowie auf Erfahrungen mit den verschiedenen Ausführungsarten von Fahrbahnübergängen, bei denen sich durch konstruktive Veränderungen oder Ergänzungen Lärmminderungen ergaben. Angesprochen werden auch die Inhalte und neuesten Entwicklungen bei der Europäischen Technischen Zulassungsleitlinie für Fahrbahnübergänge, die ETAG FÜ. Diese ETAG enthält Regelungen für verschiedene Familien von Fahrbahnübergängen, nämlich Unterflurübergänge, Fahrbahnübergänge aus Asphalt, Fahrbahnübergänge mit einem Dehnprofil, Mattenübergänge, Fingerübergänge, Rollverschlüsse und Lamellenübergänge. In einem Ausblick werden folgende Themen angesprochen: Überarbeitung der Regelwerke ZTV-ING und TL/TP-FÜ, Einführung der ETAG FÜ und die Berücksichtigung aus den Ergebnissen der Forschungsvorhaben, insbesondere aus dem Forschungsvorhaben "Leiser Straßenverkehr 2".
Schäden an Betonfahrbahnen sind fast immer auf das Eindringen von Wasser unter die Betonplatte zurückzuführen. Für die Erprobung von Entwässerungseinrichtungen wurden Versuchsstrecken auf den Autobahnen A5 (Frankfurt -Mörfelden), A7 (bei Dorfmark und Soltau) sowie der A 29 (Bei Sage) eingerichtet, bei denen verschiedene Maßnahmen (Längsentwässerung, Punktentwässerung, Flachdrainage) auf ihr Verhalten beobachtet werden.
Mit der Änderung des deutschen Straßenverkehrsrechtes werden Voraussetzungen für die amtliche Anerkennung von Anbietern von Kursen zur Wiederherstellung der Fahreignung gesetzlich konkretisiert. Das Instrument einer bundeseinheitlichen Qualitätssicherung wird per Gesetz verbindlich eingeführt. Mit der Überprüfung wird die Bundesanstalt für Straßenwesen als neutrale Stelle beauftragt. Es wird davon ausgegangen, dass es sich bei den Kursen zur Wiederherstellung der Eignung von Kraftfahrzeugführern um Maßnahmen der Personalzertifizierung handelt. Das Referat beschreibt den Ablauf des Akkreditierungsverfahrens und die Anforderungen an Maßnahmenträger, die einen Antrag auf Akkreditierung gestellt haben. Bei den Anforderungen an die Kursleiter spielen die berufliche Qualifikation sowie solche Anforderungen eine Rolle, die sich aus dem jeweiligen Qualitätssicherungssystem ergeben. In der Akkreditierung der Anbieter von Kursen zur Wiederherstellung der Fahreignung durch die Bundesanstalt für Straßenwesen wird nicht nur eine Bestätigung der Qualität und Fachkompetenz gesehen, sondern zugleich auch eine Gewähr für die Durchführung der jeweiligen Kurse nach bundeseinheitlichen Kriterien.
Road transport networks are of major importance for the economy and equally for the mobility of the citizens in the European countries. In order to improve the protection of transport infrastructures and the robustness of the European road network research projects are currently in process on national and European level. A main focus of these investigations is to analyze the specific vulnerabilities of bridges and tunnels concerning structural, operational and organizational aspects and to identify critical objects. But also infrastructures, which are critical due to their location and function in a road network, must be identified. For this the resulting regional and supra-regional impacts due to the failure of certain infrastructures have to be investigated on network level. In order to increase the security of road transport infrastructures and whole road networks the most effective security measures have to be determined. This paper gives an overview about the content and first results of current European and German research projects on road transport security.
A very high service availability is important for the operator and for the user of road tunnels, too. The service availability of a structure is directly related to its quality. The earlier quality assurance measures are being considered during the life cycle, the better a structure of high quality can be guaranteed. Problems which occur during the operation period of a structure often result from design errors or from inadequate realisation during the construction phase. They may also occur as a result of wrongly planned maintenance and refurbishment works. Thus, the transfer of specific data, information and experiences through the whole life cycle is very important. In this context methods of facility management can provide efficient assistance when they have already been used throughout all three classic phases of a structure's life cycle - planning, construction and operation. Finally the tunnel drainage system of German road tunnels is considered as an example as practical application possibility.
Data concerning accidents involving personal injury which have been collected in the context of in-depth investigations on scene in the Hannover area since 1973 and in the Dresden area since 1999 represent an important basis for empirical traffic safety research. At national and international level various analyses and comparisons are carried out on the basis of "in-depth data" from the above mentioned investigations. In-depth data play a decisive role e.g. within the validation of EuroNCAP results on secondary safety (crashworthiness) of individual passenger car models. Thus, statistically sound methods of data analysis and population parameter estimation are of high importance. Since the 1st of August 1984 the "in-depth investigations on scene" in the Hannover area have been carried out according to a sampling plan developed by HAUTZINGER in the context of a research project on behalf of BASt. In the meantime a second region of in-depth investigation on scene was added with surveys in Dresden and the surrounding area. Internationally, the acronym GIDAS (German In-Depth Accident Study) is commonly used for the two above mentioned surveys. The objective of a current research project (topic of this contribution) is, among other things, to examine and adjust the previous weighting and expansion method for the two regional accident investigations to the current general conditions.
Empirical vehicle crashworthiness studies are usually based on national or in-depth traffic accident surveys: Data on accident-involved cars/drivers are analysed in order to quantify the chance of driver injury and to assess certain risk factors like car make and model. As the cars/drivers involved in the same accident form a "cluster", where the size of the cluster equals the number of accident-involved parties, traffic accident survey data are typical multi-level data with accidents as first-level or primary and cars/drivers as secondlevel or secondary units (car occupants in general are to be considered as third level units). Consequently, appropriate statistical multi-level models are to be used for driver injury risk estimation purposes as these models properly account for the cluster structure of traffic accident survey data. In recent years various types of regression models for clustered data have been developed in the statistical sciences. This paper presents multi-level statistical models, which are generally applicable for vehicle crashworthiness assessment in the sense that data on single and multiple car crashes can be analysed simultaneously. As a special case of multi-level modelling driver injury risk estimation based on paired-by-collision car/driver data is considered. It is demonstrated that assessment results may be seriously biased, if the cluster structure inherent in traffic accident survey data is erroneously ignored in the data analysis stage.
Crash involvement studies using routine accident and exposure data : a case for case-control designs
(2009)
Fortunately, accident involvement is a rare event: the chance of an individual road user trip to end up in a crash is close to zero. Thus, according to general epidemiological principles one can expect the case-control study design to be especially suitable for quantifying the relative risk (odds ratio) of accident involvement of road users with a certain risk factor as compared to road users that do not have this characteristic. Ideally, of course, the database for such a case-control study should be established by drawing two independent random samples of cases (accidental units) and controls (nonaccidental units), respectively. If, however, special data collection is not an option, it is nevertheless possible to analyze routine accident and exposure data under a case-control design in order to fully exploit the information contained in already existing databases. As a prerequisite, accident and exposure data from different sources are to be combined in a single file of micro or grouped data in a way consistent with the case-control study design. Among other things, the proposed methodological approach offers the possibility to use in-depth data of the GIDAS type also in investigations of active vehicle safety by combining this data with appropriate vehicle trip data collected in mobility surveys.
The so-called "seat-belt injuries" or "seat-belt syndromes", described as 2-point seat-belt injuries, contain heavy inflection injuries of the lumbal spinal column, combined with heavy abdominal injuries as rupture of the upper intestinal bold or heavy injuries of the upper entrails. With "playing" children in the font of the car, with inappropriate plant of 3-point belts, identical injuries can occur.
Die meisten der in Betracht kommenden Zwischenquerschnitte werden durch die derzeitigen Entwurfsrichtlinien nicht abgedeckt. Hinreichende Erkenntnisse über ihre Leistungsfähigkeit, die bei verschiedenen Belastungen erzielbaren Verkehrsqualitäten und vergleichende Angaben zum Sicherheitsniveau der Zwischenquerschnitte liegen nicht vor. Die Projektgruppe "Zwischenquerschnitte" der Bundesanstalt für Straßenwesen untersucht daher die Vor- und Nachteile der Zwischenquerschnitte mit dem Ziel, Einsatzbereiche für die verschiedenen Ausbildungsformen von Querschnitten zu entwickeln. Der Bericht gibt einen Überblick über bisherige Aktivitäten der Projektgruppe und stellt erste Zwischenergebnisse der Untersuchung vor. Bisherige Messungen zeigen, dass der besondere Vorteil der zwei- und dreiseitigen Zwischenquerschnitte in der Verbesserung der Überholsituation liegt. Für die Beurteilung vierstreifiger Zwischenquerschnitte kann bislang erst die Aussage gemacht werden, dass immer dann, wenn die Verkehrsbelastung tatsächlich einen Querschnitt mit 4 Fahrstreifen erforderlich macht, man die beiden Fahrrichtungen aus Gründen der Verkehrssicherheit baulich trennen sollte.
This study analyses no.39 cases in which n.41 motorcyclists were fatally injured, or 36% of total motorcycle fatalities in Northern Ireland between 2004 and 2010 (n.114). There were n.17 cases (43.6%) where the actions of another vehicle driver caused the collision, in thirteen of these cases the motorcycles had their lights switched on. The remaining n.22 collisions (56.4%) were due to the actions of the motorcyclist. In the approach to the collision scene, there were n.13 cases (31.7%) in which the approach was a right hand bend and in n.8 (19.5%) cases, the approach was a left hand bend. In the remaining n.18 (43.9%) cases, the approach was a straight road. Of the n.17 (41.4%) motorcycles that slid after falling, n.10 (24.4%) fell onto their right side and the remaining n.7 (17.1%) fell onto their left side. The information from this study identifies primary and contributory causes of motorcycle collisions.
The changed focus in vehicle safety technology from secondary to primary safety systems need to evolve new methods to investigate accidents, high critical, critical and normal driving situations. Current Naturalistic Driving Studies mostly use vehicles that are highly equipped with additional measuring devices, video cameras, recording technology, and sensors. These equipped fleets are very expensive regarding the setup and administration of the study. Due to the great rarity of crashes it is additionally necessary to have a high distribution and a homogeneous distribution of subject groups. At the end all these facts are leading to a very expensive study with a manageable number of data. Smartphones are becoming more and more popular not only for younger people. Contrary to traditional mobile phones they are mostly equipped with sensors for acceleration and yaw rates, GPS modules as well as cameras in high definition resolution. Additionally they have high-performance processors that enable the execution of CPU-intensive tools directly on the phone. The wide distribution of these smartphones enables researchers to get high numbers of users for such studies. The paper shows and demonstrates a software app for smartphones that is able to record different driving situations up to crashes. Therefore all relevant parameter from the sensors, camera and GPS device are saved for a given duration if the event was triggered. The complete configuration is independently adjustable to the relevant driver and all events were sent automatically to the research institute for a further process. Direct after the event, interviews with the driver can be done and important data regarding the event itself are documented. The presentation shows the methodology and gives a demonstration of the working progress as well as first results and examples of the current study. In the discussion the advantages of this method will be discussed and compared with the disadvantages. The paper shows an alternative method to investigate real accident and incident data. This method is thereby highly cost efficient and comparable with existing methods for benefit estimation.
The number of injured car occupants decreases constantly. Nevertheless, they account for nearly 50% of all fatalities and about 44% of all seriously injured persons in German traffic accidents. Further reductions of casualties require multiple efforts in all parts of traffic safety. In this paper a detailed analysis of the important pre-hospital rescue phase was done. The basis for future improvements is the knowledge about injury causation of car occupants in combination with other corresponding influence factors. For that reason more than 1.200 severe (AIS3+) injuries of frontal car occupants were analyzed. For the most relevant injuries of car occupants multivariate analysis models were created to predict the probability of these injuries in a real crash scenario. In addition to the collision severity different influence factors like impact direction, seat belt usage, age of the occupant, and gender were analyzed. Furthermore, the models were checked regarding the goodness of fit and all results all results were checked concerning their robustness. The prediction models were created on the basis of 5.000 car accidents. Afterwards, the models were validated using 4.000 different car accidents. The prediction of the probability of severe injuries could be used for different applications in the field of traffic safety. One possibility is the implementation of the models in a tool for the on-the-spot diagnosis. The background for the development of such applications is the fact, that there are only limited diagnostic possibilities available at the accident scene. Nevertheless, the rescue forces have to make essential decisions like the alerting of the necessary medical experts, appropriate treatment, the type of transportation and the choice of an adequate hospital. These decisions quite often decide between life and death or influence the long-term effects of injured persons. At this point, indications of expectable injuries could help enormously. To enable even persons with limited technical knowledge to use the tool, a procedure was developed that facilitates the assumption of the given crash severity. Another important possibility for the application of the prediction models is the use for the qualification of information sent by e-call systems.
Over the last decades the number of traffic accident fatalities on German roads decreased by 77% down to 4968 in the year 2007. This positive development is due to optimisations of vehicle safety, roads and infrastructure and medical rescue issues. Up to now mostly the optimisations of secondary safety measures lead to this effect on vehicle safety. Since some years more and more driver assistance systems are available and lead to a further reduction of all accidents. These new systems are often comfort systems and have not primarily been developed to increase vehicle safety. In contrast to secondary safety systems primary safety systems are able to mitigate and avoid accidents. So in the future it is important to estimate the benefit of these systems in reducing accident numbers as well. Current benefit estimation methods mostly focus on a single system only and not on the combination of systems. In this paper a new method for a multivariate benefit estimation based on real accident data is developed. The paper describes the basic method to estimate the benefit of primary and secondary safety systems in combination. With the presented method the benefit will not be overestimated as it would be by a simple addition of the benefits of single systems. The model will be validated by a multivariate prospective benefit estimation of different vehicle safety systems in comparison to single benefit estimations of the same systems. For this the German In-Depth Accident Database is used. The results show the importance to implement the interactions of safety systems in the estimation process and rate the overestimation by a simple addition of the single system benefits. The validation includes primary and secondary safety systems in combination. The validation is done using more than 3500 real accidents which were initiated by cars. This sample out of the GIDAS database is representative for the current accident situation in Germany. The paper shows the necessity of a multivariate estimation of the benefit for existing and future safety systems.
In the last years various new driver information and driver assistance systems made their way into modern vehicles and there are yet countless systems underway. However, expenses for both, the development and the construction of these systems are tremendous. Therefore the interest of evaluating systems keeps growing steadily, not only regarding the results of systems developed in the last years but also regarding system ideas. Only if at least a rough benefit estimation is given, the industry can decide which development should be supported. However, there is still a lack of transparency of possible and useful methods for these kinds of estimations. These were analyses and structured in this study.
The accident research project in Dresden was founded in July 1999. To date over 6.000 crash investigations have been undertaken. About 10.000 vehicles have been documented and over 13.000 participants have been debriefed. But there is much more than this scientific success. Because of the interdisciplinary character between the medical and technical focus, the project affords an important contribution for the education of the involved students. Over 200 students of different fields of study have got experiences not only for the occupational career. This lecture describes the additional effects of the accident research project regarding the education of the students, the capacity for teamwork and learning about dealing with accident casualties.
Because of actual developments and the continuous increase in the field of drive assistant systems, representative and detailed investigations of accident databases are necessary. This lecture describes the possibility to estimate the potential of primary and secondary safety measures by means of a computerized case by case analysis. Single primary or secondary safety measures as well as a combination of both are presented. The method is exemplarily shown for the primary safety measure "Brake Assist" in pedestrian accidents. Regarding accident prevention only the primary safety measure is determined.
Bei Schrägseilbrücken und Hängebrücken ist die Tragfähigkeit und die Betriebsfestigkeit der Seile von entscheidender Bedeutung. Da in Deutschland seit einigen Jahren wieder verstärkt Schrägseilbrücken gebaut werden, kommt den neueren Entwicklungen auf diesem Gebiet eine besondere Bedeutung zu. Diese neuen Entwicklungen werden im Bericht beschrieben. An erster Stelle steht dabei die Anwendung von Litzenbündeln (LBS) in Deutschland bei der fertiggestellten Ziegelgrabenbrücke im Brückenzug der Rügenbrücke und der im Bau befindlichen Niederrheinbrücke Wesel. Diese im Ausland schon seit vielen Jahrzehnten angewendete Bauart stieß in Deutschland bisher auf Bedenken, insbesondere wegen der Prüfbarkeit und des Korrosionsschutzes. Litzenbündel bestehen im Wesentlichen aus 7-drähtigen Spannstahllitzen und speziellen Verankerungsteilen. Auf der freien Länge des Seils sind die Litzen durch ein HDPE-Rohr gegen äussere Beschädigungen und Umwelteinflüsse geschützt. Da Seile aus Litzenbuendeln bisher nicht bauaufsichtlich geregelt sind, war eine Zustimmung im Einzelfall erforderlich. Die Prüfung der Seile bei den regelmäßig durchzuführenden Bauwerksprüfungen ist verbunden mit einem großen technischen Aufwand, hohen Kosten und Beeinträchtigungen des Verkehrs. Der Bericht geht ausführlich auf mögliche Methoden der Seilprüfung ein. Bei der Ziegelgrabenbrücke wurde die magnetinduktive Prüfung, die sich bei vollverschlossenen Seilen seit vielen Jahren bewährt hat, zum Feststellen von Schäden an den Seilen aus Litzenbündeln angewendet. Neue Entwicklungen bei vollverschlossenen Seilen betreffen insbesondere die Korrosionschutzsysteme und die Ausführung der Ankerköpfe. In beiden Bereichen beschreibt der Bericht die Neuerungen. Bei den Instandsetzungen der vollverschlossenen Seile werden angespochen: dauerhafte Seilspreizung zur Verbesserung der Zugänglichkeit bei der visuellen Prüfung, Seilaustausch am Beispiel der Rheinbrücke Düsseldorf-Flehe und die Instandsetzung des Korrosionschutzes mit verschiedenen Methoden. Wegen der neueren technischen Entwicklungen entsprechen die derzeit gültigen einschlägigen Regelwerke teilweise nicht mehr dem Stand der Technik. Sie müssen daher überarbeitet oder gänzlich neu erstellt werden.
Accident simulation and reconstruction for enhancing pedestrian safety: issues and challenges
(2015)
The enhancement of pedestrian safety represents a major challenge in traffic accidents. This study allows a better understanding of the issues in pedestrian protection. It highlights the potential of in-depth studies in identifying relevant crash parameters interfering in the pedestrian safety. A computational simulation tool was developed to reconstruct pedestrian real-world crashes. A sample of 100 in-depth accident cases was reconstructed from two sources: 40 crashes provided by IFSTTAR-LMA and 60 crashes from CASR. To exemplify the methodology, two accident cases from each database were illustrated. A description of the sample of crashes was presented including the travel and impact speed of the vehicle, the driver reaction, the pedestrian walking speed, the scene configuration with the eventual obstacles, etc. This detailed description is pointing to the major factors affecting the limits of pedestrian safety systems.
Zur Ergänzung der bestehenden Routineverfahren in der forensischen Blutalkoholanalytik wurde ein massenspektrometrisches Verfahren mit d6-Ethanol als internem Standard entwickelt. Ziel war die Anwendung eines beweissicheren Bestimmungsverfahrens, bei dem Ethanol über die Retentionszeit und Substanzeigenschaften identifiziert wird. Die Pilotstudie belegt, dass die forensische Blutalkoholbestimmung durch Anwendung eines gaschromatographischen und massenspektrometrischen Verfahrens mit Dampfraumanalyse routinemäßig möglich ist. Im Gegensatz zum GC- und ADH-Verfahren ist die massenspektrometrische Blutalkoholbestimmung beweissicher. Die Autoren empfehlen die Aufnahme in die Richtlinien zur Bestimmung der Blutalkoholkonzentration für forensische Zwecke. Die Arbeit wurde vom Bund gegen Alkohol und Drogen im Straßenverkehr e.V. (B.A.D.S.) unterstützt.
Cycling supports the independence and health of the aging population. However, elderly cyclists have an increased injury risk. The majority of injured cyclists is victim of a single-sided accident, an accident in which there is no other party involved. The aim of the project "Safe and Aware on the bicycle" is to develop guidelines for an advisory system that is useful in preventing single-sided accidents. This system is able to support the elderly cyclist; enabling the cyclist to timely adapt his cycling behaviour and improve cycling safety and comfort. For the development of such advisory system the causes of singles accidents and the wishes of the elderly cyclist must be known. First step to obtain this insight was a literature survey and an GIDAS research. Unfortunately accidentology research with GIDAS did not give the full understanding of the pre-crash situations and (especially the behaviour related) factors leading to the accident. The second step was consultation of elderly cyclist through a questionnaire (n=800), in-depth interviews (n=12) and focus group sessions (n=15). This offered complementary information and a much better understanding of the behavioural aspects. Results concern the behaviour in traffic and identify specific physical (i.e. problems looking backwards over the shoulder) and mental issues. Furthermore, the needs and wishes for support in specific cycling situations were identified. In conclusion; The GIDAS results together with the information obtained contacting the elderly cyclists enabled setting up requirements for an advisory system, which is useful in preventing single-sided accidents.
Novice drivers are at high risk for crash involvement. We performed an analysis of causations, injury patterns and distributions of novice drivers in cars and on motorcycles in road traffic as a basis for proper measurements. Method Data of accident and hospital records of novice drivers (licence < 2 years) were analysed focusing the following parameters: injury type, localisation and mechanism, Abbreviated Injury Scale (AIS), maximum AIS (MAIS), delta-v, collision speed and other technical parameters and have been compared to those of experienced drivers. In 18352 accidents in the area of Hannover (years1985"2004), 2602 novice drivers and 18214 experienced drivers were recorded having an accident. Novice car drivers were more often and severe injured than experienced and on motorcycles the experienced riders were at higher risk. Novice drivers of both groups sustained more often extremity injuries. 4.5 % novice car drivers were not restraint compared to 3.7 % of the experienced drivers and 6.1 % novice motorcycle drivers did not wear a proper helmet (versus 6.5 %). Severe injuries sustained at a rate of 20 % at collision speeds below 30 km/h and in 80% at collision speeds above 50 km/h. Novice car drivers drove significant older cars. The risk profile of novice drivers is similar to those of drivers older than 65 years. Structural protection and special lectures like skidding courses could be proper remedial action next to harder punishment of violations.
Description of road traffic related knee injuries in published investigations is very heterogeneous. The purpose of this study was to estimate the risk of knee injuries in real world car impacts in Germany focusing vulnerable road users (pedestrians, bicyclists and motorcyclists) and restrained car drivers. The accident research unit analyses technical and medical data collected shortly after the accident at scene. Two different periods (years 1985-1993 and 1995-2003) were compared focusing on knee injuries (Abbreviated Injury Scale (AISKnee) 2/3). In order to determine the influences type of collision, direction and speed as well as the injury pattern and different injury scores (AIS, MAIS, ISS) were examined. 1.794 pedestrians, 742 motorcyclists, 2.728 bicyclists and 1.116 car drivers were extracted. 2% had serious ligamentous or bony injuries in relation to all injured. The risk of injury is higher for twowheelers than for pedestrians, but knee injury severity is higher for the latter group. Overall the current knee injury risk is low and significant reduced comparing both time periods (27%, p<0,0001). Severe injuries (AISKnee 2/3) were below 1%). Improved aerodynamic design of car fronts reduced the risk for severe knee injuries significantly (p=0,0015). Highest risk of injury is for motorcycle followed by pedestrians, respectively. Knee protectors could prevent injuries by reducing local forces. The classically described dashboard injury was rarely identified. The overall injury risk for knee injuries in road traffic is lower than estimated and reduced comparing both periods. The aerodynamic shape of current cars compared to older types reduced the incidence and severity of knee injuries. Further modification and optimization of the interior and exterior design could be a proper measurement. Classic described injury mechanisms were rarely identified. It seems that the AIS is still underestimating extremity injuries and their long term results.
Es wird auf Grund einer Befragung untersucht, ob ein signifikanter Unterschied zwischen Fahranfängern, die die Prüfung nach weniger als 21 Fahrstunden, und solchen, die sie nach 21 und mehr Stunden bestanden haben, in Bezug auf Unfallneigung und Unfallhäufigkeit besteht. Es ergab sich, dass die kurz ausgebildeten im ersten Jahr eine Fahrleistung von durchschnittlich 12.362 Kilometer, die langausgebildeten von 7.750 Kilometer aufzuweisen hatten. Pro 1 Million Kilometer hatten die kurzausgebildeten 45,6, die langausgebildeten 73,2 Unfälle. Dem entsprach das Verhältnis von anderen Auffälligkeiten. Bei den Kurzausgebildeten ergaben sich keine Hinweise auf Defizite. Der Nutzen einer personenunabhängigen Mindestzahl von Fahrstunden ist zweifelhaft. Fahrschüler, die eine verhältnismäßig große Zahl von Fahrstunden benötigen, stellen die eigentliche Problemgruppe dar. Fahrschüler, die in der Fahrschule schnell lernen und bei der Prüfung erfolgreich sind, haben vergleichsweise gute Fahranfängerchancen.
Nachhaltigkeit im Brückenbau
(2011)
Nachhaltigkeit und Energieeffizienz sind wichtige baupolitische Ziele. Der Bund als Bauherr ist sich seiner Vorbildfunktion bewusst: Baumaßnahmen sollen sowohl ökologisch verträglich als auch ökonomisch akzeptabel und sozio-kulturell angemessen sein. Alle drei Bereiche betreffen auch die Straßeninfrastrukturen in unterschiedlich ausgeprägter Weise. Aus Sicht des Bauherrn geht es um die Sicherstellung der Mobilität durch ein umweltverträgliches, wirtschaftliches und qualitativ hochwertiges Straßennetz. Für die Baupraxis stellt sich die Aufgabe, in ganzheitlicher Hinsicht optimierte Lösungen bereitzustellen. Brückenbauwerke haben eine hohe symbolische Kraft und prägen Städte und Landschaften. Sie sind nicht nur für Ingenieure faszinierend, sondern stellen als bedeutender Bestandteil der Straßeninfrastruktur einen hohen gesellschaftlichen Wert dar. In der heutigen Vergabepraxis werden Entscheidungen über Baumaßnahmen maßgeblich durch die Diskussion über Erstellungs- und einmalige Investitionskosten beeinflusst. Grund dafür sind auch die begrenzten finanziellen Ressourcen; dies führt aber nicht zwangsweise zu nachhaltigen Lösungen. Damit Brückenbauwerke ökonomisch und ökologisch optimiert sowie funktional und sozio-kulturell angemessen erstellt werden können, sind weiterentwickelte Wertungskriterien erforderlich. Hier liegt aber auch eine Chance für die Bauwirtschaft, ihre Kompetenz auf dem Gebiet des Bauwesens auszuschöpfen und qualitätsvolles und kostengünstiges Bauen im Lebenszyklus zu verbinden. Neue Instrumente und Methoden sind gefragt, die derzeit auf Initiative des BMVBS entwickelt werden. Vor diesem Hintergrund befasst sich eine Arbeitsgruppe der Bundesanstalt für Straßenwesen unter Beteiligung von Experten aus Forschung und Baupraxis mit der Entwicklung und Bereitstellung von Verfahren der Nachhaltigkeitsbewertung für Bauwerke der Straßeninfrastruktur. Ganzheitliche Wertungskriterien werden derzeit in Pilotstudien getestet.
The Federal Highway Network of Germany represents considerable fixed assets. Construction and maintenance activities not only require a high budget, but also influence the traffic infrastructure and, thus, the economy and society as a whole. The present safety of the network has to be ensured under consideration of environmental aspects. At the same time the network owner has to make sure that the civil works are carried out in the most efficient way. Considering the fact that financial resources are restricted, the costs have to be spent in a way to obtain the greatest possible benefit. This task is supported by the application of a comprehensive Asset Management, which is subdivided into operational and controlling tasks respectively. The paper describes the current management procedures.
In future, additional and more detailed data are needed about the current conditions of bridges for preventive maintenance management. Monitoring procedures are not merely able to provide key performance indicators for a specific point in time, but also over a period. These KPIs must be selected in such a way as to permit substantiated statements about the present and future condition of bridges. For this reason, greater efforts must be made to define the significant KPIs for the various types of bridges, and show how these figures can be reliably determined. Both the COST Action TU1402, and TU1406 offer important approaches which, properly combined, can deliver substantial added value to the calculation and description of the condition of bridges in the interest of proactive maintenance management.
Germany's road infrastructure grew over centuries to become the arteries and lifelines of our society. The present safety of the infrastructure has to be ensured under consideration of environmental aspects. At the same time the owner has to make sure that the maintenance activities are carried out in the most efficient way. Considering the fact that financial resources are restricted, maintenance costs have to be spent in a way to obtain the greatest possible benefit. In the case of bridges, which are one of the most important parts of the road infrastructure in Germany, this task is supported by the application of a bridge management system (BMS). The existing German BMS contains assessment and optimization procedures on object and network level and is the basis for advancements to meet future demands. Developments concern life cycle and quality-oriented, holistically optimized procedures. Reasonable infrastructure management will contribute to meeting efficiency and sustainability objectives and to achieving interoperability. Here holistic network infrastructure management methods are required. There is a strong need for management solutions during the whole service life of a structure. The definition of criteria for evaluation of the relevance of failure mechanisms, including acceptance thresholds, requires the availability of relevant data for management procedure. Tools for innovative investigation methods and an effective data management will help in meeting the requirements. Relevant fields of research are improved maintenance strategies to meet future demands concerning heavy goods traffic, application and further development of nondestructive testing methods for efficient and sustainable management structures, and the improvement of analytic management tools to meet future demands.
Allein im Netz der Bundesfernstraßen sind etwa 35.000 Brücken mit einer Fläche von 25 Millionen Quadratmetern enthalten. Ihr Wiederbeschaffungswert beträgt etwa 70 Milliarden DM. Es wird über die notwendigen Aktivitäten zur Erhaltung dieser für die Aufrechterhaltung des auf den Bundesfernstraßen rollenden Verkehrs besonders wichtigen Bauwerke berichtet. Aufgrund des weiter stärker werdenden Verkehrs, der zunehmenden Fahrzeuggewichte sowie der wachsenden Anzahl von Schwertransporten unterliegen insbesondere die älteren Bauwerke größerer Beanspruchung, als man bei ihrer Planung in Rechnung stellen musste. Hinzu kommt die natürliche Alterung aus sonstigen äußeren Einflüssen wie Temperatur, Witterung und erhöhter Umweltbelastung. Die Verwendung von Auftausalzen führt insbesondere bei älteren Brückenüberbauten zu Korrosionsschäden an der Bewehrung des Betons. Durch die Entwicklung eines Bauwerks-Management-Systems (BMS) wird die Verbesserung der Erhaltung von Brücken und sonstigen Ingenieurbauten angestrebt. Der Aufbau und die Wirkungsweise des BMS werden dargelegt. Des Weiteren werden die schon seit langem eingeführten Prüfvorschriften für Bauwerke im Zuge von Straßen und Wegen (DIN 1076) sowie gängige Prüfverfahren beschrieben.
Brückenmanagement
(2001)
Die systematische Erhaltung der Brücken im Zuge der Bundesfernstraßen ist eine wichtige Aufgabe für den Baulastträger Bund und die Straßenbauverwaltungen der Länder. Um künftig Erhaltungsprogramme auf einer einheitlichen Grundlage unter Berücksichtigung gesamtwirtschaftlicher Grundsätze aufstellen zu können, wird durch die Bundesanstalt für Straßenwesen derzeit im Auftrag des Bundesministeriums für Verkehr, Bau- und Wohnungswesen ein umfassendes Bauwerks-Management-System (BMS) konzipiert und realisiert. Das geplante BMS beinhaltet alle Funktionen zur Durchführung des Erhaltungsmanagements. Grundlage ist die Erhebung und Bereitstellung von objektbezogenen Informationen. In Verbindung mit netzbezogenen Daten, Rahmenbedingungen und Restriktionen wird damit die Basis für Analyseprozesse, zum Beispiel Wirtschaftlichkeitsuntersuchungen, Priorisierungen und Bedarfsermittlungen bereitgestellt. Als Ergebnis werden Maßnahmenvorschläge, optimierte Programmplanungen und Angaben zum Finanzbedarf entwickelt. Verfahren und Programmsysteme werden schrittweise ab 2002 bis 2005 den Straßenbauverwaltungen zur Verfügung gestellt.
BMS-Entwicklungen
(2002)
BMS-Entwicklungen
(2003)
Im von der DG Home (CIPS Program) geförderten Projekt "SecMan " Security Manual for Road Infrastructures" wurde ein vierstufiges Verfahren zur Identifikation kritischer Straßeninfrastrukturen, ihre Bewertung hinsichtlich diverser von Menschen verursachter Gefahren sowie die Bestimmung effektiver Schutzmaßnahmen entwickelt. Diese Ergebnisse wurden in einem ganzheitlichen "best-practice" Handbuch zusammen getragen, welches einen trans-nationalen Sicherheitsmanagement-Ansatz für Betreiber und Eigentümer von Straßeninfrastrukturen in Europa ermöglicht. Im Folgenden wird die entwickelte Methodik vorgestellt, ausgehend von der Bewertung der Netzkritikalität über die Attraktivität und Vulnerabilität eines Bauwerks hin zu einer Bewertungsmethodik für die Auswahl geeigneter Schutzmaßnahmen.
The European CASPER (Child Advanced Safety Project for European Roads) project studying car child safety includes a sociological approach in order to have a better understanding of the behaviour of parents driving children under 12 years old. A questionnaire was distributed via the internet in Europe with 998 parents (representing 1638 children) from 22 European countries responding. The results inform on the way parents secure their children during a car trip. Many parents did not control how their children were installed in the child restraint system (CRS). A toddler was more likely to travel into a child seat than an older child was. Regarding misuse situations, an important part of the participants did not think that they could make mistakes when fixing the child seat to the car (26%) or when placing the child into the seat (39%). This leaves an important field of action especially by communication via different media and in the CRS sale outlets.
Rollover scenarios in Europe
(2005)
Rollover accidents seem to be a rising problem in Europe and therefore the systematic of this accident scenario should be investigated. Based on statistical investigations on major European accident databases for different countries a series of 73 real world rollover accidents was analysed. These cases were reconstructed using PC-Crash and preliminary categorised using a modified USbased rollover classification. In a first step, the rollover events were reconstructed from the point of conflict to the vehicle- rest position. The vehicles kinematics as well as its linear and rotational velocities were derived. In a second step typical velocity characteristics as well as kinematics were identified and the events categorised according to these criteria. Based on these results four main categories were defined, covering all reconstructed accidents. This categorisation was based on mechanical parameters (rotatory and translator kinematical data of the vehicle). Significant differences can be seen for different scenarios for the "first phase of rollover".
Interdisciplinary accident research and research projects of AARU Audi Accident Research Unit
(2017)
AARU (Audi Accident Research Unit) is an interdisciplinary research project of the University Hospital Regensburg in cooperation with AUDI AG. Specific objective is to comprehend the respective accident scenario and retrieve generally applicable findings as to technical, medical and psychological processes. In order to prevent traffic accidents and to alleviate vehicle accident consequences, postulates of general traffic safety, human-machine interaction, technical design and function of new vehicles and occupant as well as third party protection shall be inferred from these findings. Specifically, each accident with new Audi, Lamborghini and Ducati vehicles involved is analyzed interdisciplinary, discussed in a case meeting and anonymously documented with more than 2,000 parameters. The database is continually used for solving safety relevant issues. Parallel to accident analysis, research projects are performed in the fields medicine, psychology and engineering in order to gain comprehensive insight and identify potential additional areas of activity of accident research.
Die hier berichtete Auswertung der Leistungen in den Tests zur Messung kognitiv-psychomotorischer Fähigkeiten haben durchgehend erbracht, dass die neuroleptisch behandelten Patienten unter Stress und Zeitdruck in ihrem Leistungsumfang gegenüber Gesunden beeinträchtigt sind. Sie haben allerdings eine ausgeprägte Tendenz Fehler zu vermeiden, was sich - relativ gesehen - günstig auf die Qualität der Leistung auswirkt. Es bleibt derzeit offen, ob die Patienten ihre eigenen Leistungseinbußen in Teilbereichen durchaus empfinden und daraus kompensatorisch risikovermeidend reagieren. Wieweit die von den Patienten erbrachten Leistungen ausreichen, die Fahrtüchtigkeit daraus abzuleiten, kann hier generell nicht beurteilt werden. Es ist notwendig, Normwerte eines gerade noch zulässigen Mindestmaßes an psychomotorischer Funktionstüchtigkeit zu erarbeiten. Die weitere Auswertung der Befindlichkeitsbeurteilungen sowie der habituellen Persönlichkeitsmerkmale - als intervenierende Variable - wird möglicherweise mehr Licht in die Interpretation bringen.
The data situation for quantifying the proportion of accidents avoided by the introduction of active safety systems is incomplete, since there is generally no data available on the accidents avoided by the technology in question. In this paper, a split-register approach is suggested and compared with the classical case-control approach known from epidemiologic applications. Provided a set of assumptions hold, which can reasonably be made in such data situations, the split register approach allows inferences on the population accident risk. For both approaches the benefits of basing the analysis on the results of a logistic regression to adjust for confounding factors are outlined. The biasing effects of violating key assumptions are discussed and the split-register approach is demonstrated using the example of the active safety system ESP with data from the German in-depth accident study GIDAS.
This study that was funded by the Research Association for Automotive Technology (FAT) develops a method for the evaluation of the placement of tanks or batteries by using the deformation frequencies in real-world accidents. Therefore, the deformations of more than 20.000 passenger cars in the GIDAS database are analysed. For each vehicle a contour of deformation is calculated and the deformed areas of the vehicles are transferred in a rangy matrix of deformation. Thereby, the vehicle is divided into more than 190.000 cells. Afterwards, all single matrices of deformation are summarized for each cell which allows representative analyses of the deformation frequencies of accidents with passenger cars in Germany. On the basis of these deformation frequencies it is possible to determine least deformed areas of all passenger cars. Furthermore, intended placements of tanks or batteries can be estimated in an early stage of development. Therefore, all vehicles with deformations in the intended tank areas can be analysed individually. Considering numerous parameters out of the GIDAS database (e.g. collision speed, kind of accident, overlap, collision partner etc.) the occurring forces can be calculated or the deformation frequency can be estimated. Furthermore, it is possible to consider the influence of primary and secondary safety systems on the deformation behaviour. The analysis of "worst case accident events" is an additional application of the calculated matrix of deformation frequency.
Im Mittelpunkt der Überlegungen zu Perspektiven einer zeitgemäßen und sicherheitswirksamen Fahranfängervorbereitung steht die Absenkung des weiterhin hohen Anfangsrisikos bei Fahranfängern. Ausgehend von den positiven Erfahrungen mit dem Begleiteten Fahren ab 17 beauftragte das Bundesministerium für Verkehr, Bau und Stadtentwicklung (BMVBS) die Bundesanstalt für Straßenwesen (BASt) mit der Erarbeitung eines Rahmenkonzepts, in dem Entwicklungsperspektiven für weitere Verbesserungen der Vorbereitung von Fahranfängern und wissenschaftlich begründete Maßnahmenvorschläge für die Erhöhung der Fahranfängersicherheit formuliert werden. Zunächst werden die Aufgaben und die Vorgehensweise der Rahmenkonzepterarbeitung sowie die Kriterien für die Ableitung von Maßnahmenprioritäten skizziert. Ausgehend von den Erkenntnissen zur Entwicklung des Unfallrisikos im Verlauf der Fahrkarriere werden im Anschluss die maßgeblichen Ansatzpunkte zur verbesserten Gestaltung eines sicheren Übergangs in die Automobilität aufgezeigt. Zentrale Maßnahmenvorschläge des Rahmenkonzepts werden vorgestellt. Diese beziehen sich auf die Bekämpfung der maßgeblichen Ursachen des erhöhten Fahranfängerrisikos (Fahrerfahrungsdefizit und Einstellungsmängel), die Optimierung bestehender Fahranfängermaßnahmen und die verstärkte Erschließung von Technik und Wissenschaft für das Fahren lernen.
Seit einigen Jahren steht mit dem pupillographischen Schläfrigkeitstest (PST) ein objektives Messverfahren zur Ermittlung der Tagesschläfrigkeit zur Verfügung, wobei die Zunahme der spontanen Schwankungen des Pupillendurchmessers unter Müdigkeit registriert wird. Es wurde eingesetzt bei verschiedenen Probandengruppen, die einem potenziell erhöhten Risiko von Vigilanzminderungen ausgesetzt sind: chronische Schmerzpatienten (n = 20) beziehungsweise substituierte Heroinabhängige (n = 52) unter Opioiden, ambulante Patienten unter Psychopharmaka (n = 32), Allergiker unter Antihistaminika (n = 40) und medizinisches Nachtdienst-Pflegepersonal (n = 40). Verglichen wurde unter anderem mit zwei Kontrollgruppen (n = 21, n = 10). Bei den Untersuchungen ergaben sich relativ normale Schläfrigkeitswerte bei ambulanten Psychopharmaka-Patienten und Allergikern. Teils exzessiv erhöhte Werte wurden dagegen insbesondere bei substituierten Heroinabhängigen (81 Prozent), opiatversorgten Schmerzpatienten (59 Prozent) und dem Nachtdienstpersonal (70 Prozent) festgestellt.
At IAM RoadSmart we share the excitement about autonomous cars " who wouldn't! However over half of the drivers we polled supported concentrating on making drivers safer " among IAM RoadSmart members it was 70%. Driverless cars are still years away but delivering safer drivers can help reduce death and injury from tomorrow. Governments, academics and car makers need to work hard to convince sceptical British and American drivers that autonomous cars can deliver the benefits promised such as a 90% plus reduction in road deaths.
The Swedish "Vision Zero" regards road fatalities and severe injuries as unacceptable. The vision is based on this ethical perspective together with a fundament of shared responsibility between the system designers and the road user. The design of the traffic system shall protect the road user from these effects as long as he or she follows the traffic rules. It should be possible to make a mistake without being killed. This policy has, during the first period of the "vision zero" (since 1997) put high priority on road and car design where the purpose has been to develop a forgiving environment. Gradually it has, however, become clear that much more effort has to be focused on the responsibility of the road user. Protecting measures will have limited effect as long as the understanding and acceptance from road users is limited. During the last years, Sweden has gone through several improvements of the driver education and is in the middle of important improvements of road safety education for children in schools. Several EU-projects has contributed to this development. One aspect that has received large international interest is the lay instructed driver training from 16 years of age supervised by parents. This has been in use since 1993. Another is the development of mandatory courses, such as an introduction for the learner and the lay instructor, a "risk awareness" courses dealing specifically with speeding, seat belt use, drunk driving, tiredness, and driving on low friction. The presentation will share some of the "vision zero" fundaments together with the latest experiences, research and development concerning driver education in Sweden.
An der Fortbildungsakademie der Ärztekammer Nordrhein werden in einem 16-Stunden-Kurs Qualifizierungen zum Fachgutachter/zur Fachgutachterin für verkehrsmedizinische Begutachtung in Kooperation mit unterschiedlichen Fachreferenten aus den verschiedenen klinischen Bereichen durchgeführt. Leistungskontrollen zum Kursinhalt, ein intensives Arbeiten an Fallbeispielen oder gar eine fachliche Begleitung der ersten Gutachten sind nicht generell vorgegeben, wenngleich in Evaluationen zum Kurs insbesondere eine fallorientierte Ausbildung und eine Supervision zumindest in ersten eigenen Begutachtungen von den Teilnehmern/Teilnehmerinnen gewünscht werden. Auf der Grundlage der Erfahrungen der Autoren mit der Leitung/Moderation der entsprechenden Fachfortbildungen der Ärztekammer Nordrhein wurden das bestehende Curriculum kritisch diskutiert und Anregungen zur Umstrukturierung erarbeitet, die im Einzelnen vorgestellt werden. Dabei handelt es sich um ein Konzept auf der Basis des "blended learning": Via Internet wird vertiefendes Lehrmaterial für die verschiedenen Fachbereiche der medizinischen Begutachtung unter verkehrsmedizinischen Fragestellungen zur Bearbeitung angeboten. Die Bearbeitung selbst kann online kontrolliert und bei Bedarf auch mit Lerninhaltsüberpruefungen verknüpft werden. Zusätzlich können Fallbeispiele anonymisiert vorgelegt und mit tatsächlich ausgesprochenen Begutachtungen bereitgestellt werden. Weiterhin wird eine qualifizierte Begleitung zumindest zu Beginn der Gutachtertätigkeit angeregt.
Structured road markings are becoming popular as edge line on high speed roads, ensuring night time visibility (retroreflection) during rain. These markings are often also "audio-tactile": vehicles (un)intentionally driving over it may produce much more tyre/road sound, which may be observed in the vehicle but also in the vicinity. The sound increase inside the car can be considered as a positive side effect, as it alarms the driver and may be very helpful for the prevention of "doze off" traffic accidents. The sound increase perceived outside the car however, may have a positive aspect as it can warn people on the emergency lane about the approaching vehicle, but it may as well annoy people living around. A method for the assessment of the acoustic properties of audio-tactile markings has been developed. It is mainly based on the "Close Proximity" (CPX) method, an ISO method intended for the acoustic assessment of pavements. The results of measurement campaigns with CPX trailers in Belgium and Germany according to a specially designed procedure are presented. The feasibility of the method is discussed. The research has been carried out in the frame of the standardization activities of the CEN working group CEN/TC226/WG2 "Horizontal signalization".
India is one of the leading countries reporting highest road accidents & related injuries. TMARG (Tata Motors Accident Research Group) has been recording crashes in association with M/s. Lokamanya Medical Foundation since 2011 with M/s, Amandeep Hospitals since Aug 2013. This study has highlighted some accident types not discussed extensively in literature. Trucks to Truck impacts " Cabin interaction with overhanging loadbody structures and Offset underside impacts for passenger vehicles are seen in significant numbers. The paper discusses these in more detail including severity.
The development of tyre- and truck-manufacturers leads to the direction to introduce wide base single tyres (size 495/45R22,5) instead of twin tyres on the driving axle of trucks, tractors and busses. To study the driving behaviour and safety of various trucks and units with different tyre combinations and loading conditions was the aim of the study. A computer-aided simulation was used for this investigation. Drive tests with a 40 t unit with prototype single tyres on the drive axle were carried out to verify the simulation. Alterations in driving behaviour and driving safety are mainly dependent on the tyre cornering stiffness. The prototype wide single tyres had a higher lateral stiffness which leads to a higher degree of under-steering (safer driving behaviour). The altered spring base on the drive axle had no influence on the side- tilt stability of vehicle combinations but the solo truck profited from the higher rear axle roll stiffness (less danger for roll-over accidents). As far as the driving safety is concerned nothing speaks against wide base tyres on the drive axle. The simulation of a tyre defect in a bend (assuming 40% of the max. transferable side force for the flat tyre) showed no increased danger using wide single tyres. Later driving tests showed however the need of tyre run flat possibilities to avoid jack-knifing of road trains. Also tyre pressure monitoring systems and electronic stability programs for the trucks are advised.
In the framework of the OECD study "Moving Freight with Better Trucks", several vehicle combinations which are worldwide in operation were examined regarding different performance criteria. One criterion was the road wear performance of these articulated vehicles. With given tyre and vehicle data (mainly weights and axle loads) the road wear performance was calculated for each vehicle combination. The method according to COST 334 is presented and the vehicle combinations are compared
The Swedish National Road Administration (SNRA), the Japanese Automobile Research Institute (JARI) and the Federal Highway Research Institute (BASt) are co-operating in the International Harmonized Research Activities on Intelligent Transportation Systems (IHRA-ITS). Under this umbrella a joint study was conducted. The overall objective of this study was to contribute to the definition and validation of a "battery of tools" which enables a prediction and an assessment of changes in driver workload due to the use of in-vehicle information systems (IVIS) while driving. In this sense \"validation\" means to produce empirical evidence from which it can be concluded that these methods reliably discriminate between IVIS which differ in terms of relevant features of the HMI-design. Additionally these methods should also be sensitive to the task demands imposed on the driver by the traffic situation and their interactions with HMI-design. To achieve these goals experimental validation studies (on-road and in the simulator) were performed in Sweden, Germany and Japan. As a common element these studies focused on the secondary task methodology as an approach to the study of driver workload. In a joint German-Swedish on-road study the Peripheral Detection Task (PDT) was assessed with respect to its sensitivity to the complexity of traffic situations and effects of different types of navigation systems. Results show that the PDT performance of both the German and the Swedish subjects reflects the task demands of the traffic situations better than those of the IVIS. However, alternative explanations are possible which will be examined by further analyses. Results of this study are supplemented by the Japanese study where informational demands induced by various traffic situations were analysed by using a simple arithmetic task as a secondary task. Results of this study show that relatively large task demands can be expected even from simple traffic situations.