Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (62)
- Buch (Monographie) (41)
- Wissenschaftlicher Artikel (12)
- Teil eines Buches (Kapitel) (2)
- Bericht (2)
Schlagworte
- Simulation (119) (entfernen)
The sequence of accident events can be classified by three essential phases, the pre-crash-sequence, the crash-sequence and the post-crash-sequence. The level of reliability of the information in the GIDAS-database (German In Depth Accident Study) is provided predominantly on the passive side. The period to evaluate active safety systems begins already in the pre-crash-sequence. The assessment of the potential of sensor- or communication-based active safety systems can only be accomplished by a detailed analysis of the pre-crash-phase. Hence the necessity to analyze the early period of the accident event in detail arises. This is possible with the help of the digital sketches of the accident site and the simulation of the accident by a simulation method of the VUFO GmbH. After simulating the pre-crash scenario it is possible to generate additional and standardized data to describe the pre-crash-sequences of an accident in a very high detail. These data are documented in a second database called the GIDAS Pre-Crash-Matrix (PCM). The PCM contains various tables with all relevant data to reproduce the pre-crash-sequence of traffic accidents from the GIDAS database until 5 seconds before the first collision. This includes parameters to describe the environment data, participant data and motion or dynamic data. This paper explains the creation of the PCM, the simulation itself and the contents and structure of the PCM. With this information of the pre-crash-sequence for various accident scenarios an improved benefit estimation and development of active safety systems can be made possible.
The objective of the study is to measure the risk of pedestrian and bicyclist in urban traffic through an analysis of real-world accident data. The kinematics and injury mechanisms for both pedestrian and bicyclists are investigated to find the correlation of injury risks with injury related parameters. For this purpose, firstly 338 cases are selected as a sample from an IVAC accident database based on the In-depth Investigation of Vehicle Accident in Changsha of China. A statistic measurement of the fatality and serious injury risks with respect to impact speed was carried out by logistic regression analysis. Secondly, 12 pedestrian and 12 bicyclist accidents were further selected for reconstruction with MADYMO program. A comparative analysis was conducted based on the results from accident analysis and computer reconstructions for the injury risk, head impact conditions and dynamic response of pedestrians and bicyclists. The results indicate that bicyclists suffered lower risks of severe injuries and fatalities compared with pedestrians. The risks of AIS 3+ injury and fatality are 50% for pedestrians at impact speeds of 53.2 km/h and 63.3 km/h, respectively, while that for bicyclists at 62.5 km/h and 71.1 km/h, respectively. The findings could have a contribution to get a better understanding of pedestrians" and bicyclists" exposures in urban traffic in China, and provide background knowledge to generate strategies for pedestrian protection.
Cycle helmets have continued to increase in popularity since their introduction half a century ago. Many studies indicate that overall, head injury can be significantly reduced by wearing them. This study was conducted using two distinct sets of real-world cycling collision data from Ireland, namely cases involving police collision reports and cases involving admission to a hospital emergency department. The analyses sought to simulate and analyse the protective performance of cycle helmets in such collision scenarios, by comparing the Head Injury Criterion score and peak head accelerations, both linear and angular. Cycle collisions were simulated using the specialised commercial software MADYMO. From the simulation results, these key metrics were compared between the same-scenario helmeted and unhelmeted cyclist models. Results showed that the inclusion of bicycle helmets reduced linear accelerations very significantly, but also increased angular accelerations significantly compared to unhelmeted situations. Given the modest protective performance of cycle helmets against angular accelerations, it is recommended that cycle helmet manufacturers and international test standards need to pay more attention to head angular accelerations.
Motorcycle safety research
(2007)
Honda- global motorcycle sales exceeded the 10 million units mark since 2004, and further expansion is expected. As a responsibility for a company to provide mobility, Honda is focusing on motorcycle safety as top priority and has been working on various activities for both aspects of hardware and software. Here, we present Honda- activity for the safety technology of motorcycles. At present, Honda is promoting motorcycle safety in the four themes of prevention and collision safety such as safety education, recognition assistance, accident prevention and injury reduction. First, in the area of the safety education, the "Honda Safety Driving Promotion Center" was established in 1970, and motorcycle riders and vehicle driver trainings have been organized, and the traffic training centers are used as an actual practice field not only in Japan but also in many other regions in the world. Through our training activities, the new area of safety training with hardware assistance was developed and Honda- unique technology was accumulated such as the riding simulator which can provide experience of potentially dangerous situations without risk. Especially, the "riding trainer", the popular version of the riding simulator, was introduced at several motor shows in various countries and launched in September 2005. It was distributed first in Europe and is expected to expand globally aiming at 3000 units worldwide.. And in Europe, the newest version, which includes the suburban roads program, jointly developed with ADAC, will be released in near future. In the area of recognition assistance, "vehicle to vehicle communication technology" is under development using the advantage of being a manufacturer of both motorcycles and cars. This technology is under research as Honda "ASV-3" in Japan, and as part of C2C activity in Europe. As for the accident prevention, advanced brake systems for motorcycles to assist more effective brake operation have been expanded, Honda signed the European Road Safety Charter in April 2004 with the advanced brake systems commitment and furthermore, they are expanding according to vehicle characteristics and region. Then all models above 250 cc will have a version of the system by 2010. And as the last theme, "motorcycle airbag system" is introduced which is equipped on a mass production motorcycle for the first time in the world. It has been researched and developed for a long time as an injury reduction technology for collision accidents. Honda automobile technology was used for the research and development of the motorcycle airbag, and many specific issues such as the analysis of the collision conditions particular to motorcycles have been solved to realize today- success. It might be known that ADAC in-house crash test held in August this year confirmed the high effectiveness of the airbag system and showed a positive result. This motorcycle airbag system is equipped to the Honda Gold Wing and launched in North America in August, 2006. Also in Europe, it will be sold by the end of this year. Each theme of Honda motorcycle safety technology can be seen at the Honda booth.
In Anbetracht des stetigen Wachstums des Schwerverkehrsaufkommens auf dem deutschen und europäischen Straßennetz wurden durch das Bundesministerium für Verkehr, Bau und Stadtentwicklung (BMVBS) und die Bundesanstalt für Straßenwesen (BASt) in der jüngsten Vergangenheit mehrere Forschungsprojekte initiiert, um die Auswirkungen dieses wachsenden Verkehrsaufkommens auf die Brückenbauwerke, sowohl hinsichtlich des Brückenneubaus als auch hinsichtlich des Brückenbestandes, zu analysieren. Vom Forschungsnehmer wurden hierzu in vorhergehenden Projekten auf der Grundlage von Verkehrssimulationsrechnungen verschiedene Lastmodelle identifiziert, die die Beanspruchungen infolge prognostiziertem zukünftigen Verkehr oder eines in gewissen Teilen bekannten objektspezifischen Verkehres abdecken. Die Relevanz der identifizierten Lastmodelle in den Sicherheitskonzepten wurde bisher nicht untersucht. Dies steht im Schwerpunkt dieser Projektaufgabe. Für ein ausgewähltes Tragsystem (2x40 m Zweifeldsystem mit einem zweistegigen Plattenbalkenquerschnitt in Massivbauweise) wurden hierzu sicherheitstheoretischen Untersuchungen durchgeführt. Grundlage solcher Untersuchungen ist die Berücksichtigung von streuenden (zufälligen) Kenngrößen zur Abbildung von inneren Widerständen diesen gegenüber stehenden Beanspruchungen. Für die stochastische Beschreibung der Beanspruchungen infolge des Straßenverkehrs wurden die Ergebnisse der in den vorhergehenden Forschungsprojektes Verkehrssimulationsrechnungen verwendet und eine Vorgehensweise zur Aufbereitung dieser Datenbestände entwickelt. Hierdurch ist es möglich, eine differenzierte stochastische Beschreibung der Beanspruchungen aus Verkehrseinwirkungen unter Kenntnis objektspezifischer Verkehrscharakteristiken zu erstellen. Im Ergebnis der Untersuchungen zeigt sich, dass über verschiedene betrachtete Verkehrscharakteristiken und zugehörige Lastmodelle hinweg relativ homogene Sicherheitsindizes ergeben. Unter Berücksichtigung von Modellunsicherheiten auf der Einwirkungs- und Widerstandsseite liegen die Ergebnisse leicht über den "normativen Vorgaben" des Sicherheitsindexes.
In road traffic accidents, a car-seat and its occupant can be subjected to various crash pulses in the case of a rear impact. This study investigates the influence of crash pulse shape on seat-occupant response and evaluates the corresponding risk of whiplash injury. For this purpose, a rigorously validated seat-occupant system model is used to study different carseat designs and crash pulses. Two different car-seat concepts are also presented which can effectively mitigate whiplash injury for a wide range of crash severity. It is shown that for crash pulses of similar severity, the level of whiplash-risk depends strongly on the combined effects of seat design and crash pulse shape.
Eine moderne Verkehrsinfrastruktur ist die Voraussetzung für Mobilität und wirtschaftliches Wachstum. Um in Zeiten der Globalisierung den Wirtschaftsstandort Deutschland zu sichern und auszubauen, gilt es, flexibel auf die sich rasant ändernden Rahmenbedingungen zu reagieren. Verkehr erzeugt jedoch Lärm, den die Bevölkerung mit steigender Sensibilität wahrnimmt. Leistung, Produktivität und Lebensqualität sind durch Lärm stark beeinträchtigt. Etwa 60 % der Bevölkerung in Deutschland fühlen sich durch den Straßenverkehrslärm belästigt. Die Auswirkungen des Lärms von der Beeinträchtigung der Konzentration und Kommunikation bis hin zur möglichen Schädigung der Gesundheit sind durch umfassende Studien des Umweltbundesamtes (UBA) belegt. Im Dezember 2009 wurde nach vier Jahren Forschungsarbeit das durch das Bundesministerium für Wirtschaft und Technologie (BMWi) geförderte Forschungsprojekt "Leiser Straßenverkehr 2" erfolgreich abgeschlossen. Insgesamt elf Partner aus Industrie und Forschung haben gemeinsam Lösungen erarbeitet, wie der Straßenverkehrslärm dauerhaft reduziert werden kann. Die Projektkosten wurden auf ca. 4,5 Mio. EUR veranschlagt und werden jeweils zu 50 % vom BMWi und den Forschungspartnern getragen. Der Bau der Erprobungsstrecken wird aus Baumitteln finanziert. Auf diese Weise unterstützt das Bundesministerium für Verkehr, Bau und Stadtentwicklung (BMVBS) das Projekt "Leiser Straßenverkehr 2". Einen Schwerpunkt des Projektes stellte die Entwicklung eines leiseren Lkw-Reifens für die Antriebsachse dar. In Zusammenarbeit mit dem Projektpartner Continental AG konnte im Frühjahr 2009 ein geräuschreduzierter Lkw-Reifen auf dem Markt eingeführt werden, der gegenüber dem Vorgängerprodukt um ca. 3,5 dB(A) leiser ist. Die Firma Continental AG plant, dieses neue leisere Reifenprofil auf andere Reifendimensionen zu übertragen. Darüber hinaus wurde von der Technischen Universität Hamburg-Harburg, der Leibniz Universität Hannover und der Firma Continental AG ein Berechnungsmodell zur detaillierten Simulation eines rollenden Reifens auf einer Fahrbahn, der daraus resultierenden Reifenschwingungen und der damit verbundenen Geräusche entwickelt. Erstmals steht ein derartiges Instrument für die Reifenoptimierung zur Verfügung. Eine weitere Schallreduktion wurde im Projekt angestrebt, indem die akustische Lebensdauer von offenporigen Asphalten durch Vermeidung der Verschmutzung verlängert wird. Um dies zu erreichen, wurde ein modifiziertes Bitumen entwickelt, mit dem die Schmutzanhaftung an den Hohlraumwandungen offenporiger Asphalte minimiert werden kann. Im Rahmen der Erprobung auf der Bundesautobahn A 24 bei Berlin wird derzeit geprüft, wie sich dieser modifizierte offenporige Asphalt in der Straßenbaupraxis bewährt. Darüber hinaus wurden von der Firma Müller BBM Resonatoren entwickelt, die in die offenporige Deckschicht integriert werden und aufgrund ihrer speziellen Frequenzabstimmung ein breiteres Frequenzband zur Schallreduzierung abdecken sollen. Im Juli 2009 erfolgte in einem Testabschnitt auf der Erprobungsstrecke A 24 die bautechnische Umsetzung der Ergebnisse in die Praxis. Ein weiterer Schwerpunkt im Projekt war die akustische Optimierung von Lamellen-Fahrbahnübergängen für lange Brücken. Umfangreiche Untersuchungen wurden dabei im Prüfstand Fahrzeug/Fahrbahn der BASt durchgeführt. Im Juli 2009 wurden die neuen lärmarmen Oberflächen auf einem Fahrbahnübergang auf der A 10 bei Phoeben/Havelbrücke eingebaut und zeigten im Vergleich zum Lamellen-Fahrbahnübergang ohne Rautenelemente eine lärmreduzierende Wirkung von ca. 5 dB(A). Insgesamt zeigen die Forschungsergebnisse Entwicklungspotenziale zur weiteren Schallreduktion auf. Ein zentrales Ziel weiterführender Forschungskonzepte wird es sein, neuartige lärmarme Fahrbahnbeläge zu entwickeln und technische Lösungen für die Anwendung in der Straßenbaupraxis zu finden. Darüber hinaus sollen die Simulationsmodelle erweitert und optimiert werden, damit unter Berücksichtigung verschiedener Einflüsse aus Reifen und Fahrbahn Geräuschprognosen schnell und zuverlässig möglich sind.
Vor dem Hintergrund der erwarteten zukünftigen Klimaentwicklung mit veränderten Temperatur- und Niederschlagsverhältnissen wird das Gefährdungspotential für Schutzgüter durch Böschungsrutschungen möglicherweise ansteigen. Für den Neu- und Ausbau von Bundesfernstraßen und für die Unterhaltung des bestehenden Straßennetzes können sich hieraus zwangsläufig höhere Risiken ergeben. Daher soll eine geeignete Methodik zur Abschätzung des zukünftigen Gefährdungspotentials durch Rutschungen entwickelt und diese an Fallbeispielen angewendet werden. Anhand einer exemplarischen Auswahl von drei regionaltypischen Fallbeispielen, der Altmündener Wand (Südniedersachsen), dem Rutschhang Pünderich (Moseltal) und dem Wißberg (Rheinhessen) wurde eine Bewertung der dort bereits eingetretenen Rutschereignisse im besonderen Hinblick auf klimatologische Einflussgrößen durchgeführt. Die Rutschereignisse wurden mit gemessenen Niederschlags- und Temperaturdaten (Beobachtungsdaten) des Deutschen Wetterdienstes korreliert, wobei sowohl der Rutschungszeitpunkt als auch der Zeitraum vor einem Rutschereignis berücksichtigt wurde. Zur Abschätzung der zukünftigen Klimaentwicklung in den drei Regionen und der damit möglicherweise verbundenen Zunahme von Rutschungen wurden simulierte Klimaparameter aus dem regionalen Klimamodell REMO (Szenario A1B) verwendet. Dabei wurden die Parameter Niederschlag, Starkniederschlagsereignis und Frost ausgewählt, die sich bereits bei der Analyse mittels der Beobachtungsdaten als rutschungsrelevant herausgestellt haben. Es erfolgte eine Korrelation der Beobachtungsdaten mit den Klimamodelldaten für heutiges Klima (Kontrolllauf). Mittels des Vergleiches der Kontrolllaufdaten mit den entsprechenden Klimamodelldaten für zukünftiges Klima (Szenariolauf) wurde eine erste Trendbetrachtung der zukünftigen Klimaentwicklung innerhalb der drei Untersuchungsgebiete vorgenommen. In allen drei Untersuchungsgebieten ist der Trend in Bezug auf die Klimaänderung gleich, allerdings ist die Varianz bei den einzelnen Klimaparametern unterschiedlich. Die Sommerhalbjahre sind zum einen durch die generelle Abnahme der Niederschlagsmenge und zum anderen durch die Zunahme von Starkniederschlagsereignissen gekennzeichnet. In den Winterhalbjahren werden die Niederschlagsmenge und vor allem die Starkniederschlagsereignisse zunehmen. Hinzu kommt die deutliche Abnahme sowohl der einzelnen Frosttage als auch der Frostperioden. Diese klimatische Entwicklung wird sich auf die Eintrittswahrscheinlichkeit und das Schadensausmaß von Rutschungen dahingehend auswirken, dass bei Lockergesteinsböschungen mit einer Zunahme von oberflächennahen Rutschungen, Schlamm- und Schuttströmen im Sommerhalbjahr und einem Anstieg des Rutschungsrisikos gegen Ende des Winterhalbjahres zu rechnen ist. Bei Festgesteinsböschungen werden zunehmende Verwitterungs- und Erosionsprozesse zu einer erhöhten Rutschungshäufigkeit führen. Da sich klimatische Veränderungen regional zeitlich verzögert einstellen werden, wurde eine empirisch-statistische Einschätzung und eine Ausweisung regionaler Gefährdungsbereiche in Hinblick auf zeitabhängige Eintrittswahrscheinlichkeiten von Rutschungen entlang des Bundesfernstraßennetzes vorgenommen. Dies erfolgte mittels eines graphischen klimatisch-ingenieurgeologischen Modellansatzes für jedes Fallbeispiel. Dabei wurden die Klimaparameter aus dem Klimamodell mit dem rutschungsrelevanten ingenieurgeologischen Parameter Böschungsneigung verschnitten und korreliert, was mit Hilfe des jeweiligen digitalen Geländemodells realisiert wurde. Zusätzlich wurden das digitale Bundesfernstraßennetz und ein digitales Punktekataster von Rutschereignissen in das Modell integriert. Für die Abschätzung des Gefährdungspotentials wurden die Daten aus der Kontrolllauf-Zeitperiode 1971-2000 mit den Daten der Szenariolauf-Zeitperiode 2011-2100 korreliert. Die entsprechenden prozentualen Abweichungen für jeden einzelnen Parameter wurden in Bezug auf ihre Relevanz für das Auslösen von Rutschungen zum einen jahreszeitlich und zum anderen über das Jahr betrachtet und bewertet, wobei auch die Gewichtung aus ingenieurgeologischer Sicht berücksichtigt wurde. Im Ergebnis ist in allen drei Modellgebieten tendenziell im Sommerhalbjahr zwischen 2011 und 2080 und im Winterhalbjahr ab der zweiten Jahrhunderthälfte mit einem erhöhten Rutschungsrisiko zu rechnen. Durch die Korrelation der Klimaparameter mit der Böschungsneigung kann das zukünftige Gefährdungspotential durch Rutschungen entlang des Bundesfernstraßennetzes in einem ersten Schritt zeitabhängig eingestuft und somit abgeschätzt werden. Durch die Weiterentwicklung des Modells könnte so eine bundesweite Risikokarte generiert werden.
Als Ergebnis des Forschungsvorhabens wurde ein Simulationsverfahren für die Ermittlung von Streckenkapazitäten auf Bundesautobahnen (BAB) bei winterlichen Straßenzuständen erarbeitet. Der Berechnungsansatz wurde auf eine robuste Verfahrensweise ausgelegt, um die Auswirkungen von Ungenauigkeiten und Fehlern der Eingangsgrößen zu minimieren. Das Verfahren orientiert sich an den technischen Rahmenbedingungen wie z.B. die Eigenschaften der derzeit verfügbaren Daten der Wetterprognose und der Umfelddatenerfassung. Zugleich werden die Anforderungen an die Nutzung der Prognoseergebnisse berücksichtigt. Ausgehend von einer Grundkapazität der Streckenabschnitte in Anlehnung an das Handbuch für die Bemessung von Straßenverkehrsanlagen (HBS) wurden Abschlagsfaktoren für die jeweils vorherrschende Witterungssituation ermittelt. Diese Witterungseigenschaften wurden zuvor anhand charakteristischer Eingangsgrößen zusammengefasst und als Wetterklassen definiert. Das nachgeschaltete Prognoseverfahren ist als zweistufiger Ansatz mit einer Planungsprognose für die vorausschauende Disposition sowie einer Kurzfristdarstellung für die operative Durchführung der Verkehrsmanagements, des Straßenbetriebsdienstes und des Arbeitsstellenmanagements aufgebaut. Es basiert auf einem Warteschlangenmodell. Die Ergebnisse zeigen mögliche Stauereignisse auf und können als Entscheidungshilfe verwendet werden. Beide Komponenten setzen auf den gleichen grundsätzlichen Vorgehensweisen für die Prognose auf. Es bleibt offensichtlich, dass die Güte der Wetterprognose für die korrekte Auswahl der Wetterklasse entscheidend ist. Die Zuverlässigkeit der nachfolgend aufgesetzten Prognose des Verkehrsablaufs korreliert daher unmittelbar mit der Qualität der Eingangsgröße Wetterprognose. Aus diesem Grund ist der Bereitstellung hochwertiger und kleinräumiger Wetterprognosen für den Straßenbetriebsdienst die erforderliche Aufmerksamkeit zu widmen. Die im Forschungsvorhaben entwickelte modelltechnische Abbildung der witterungsbedingten Kapazitätseinschränkung und ihrer Auswirkungen auf den Verkehrsablauf durch zwei Risikostufen in Form einer "Warnung" und eines "Alarms" hat sich in der Evaluierung bewährt. Dabei ist die betriebsnahe Interpretation der Prognoseergebnisse möglich. Das Verfahren mit den Vorhersagen des Verkehrszustands Eingangsgrößen beweist, dass sie als Auslösekriterien für Maßnahmen des Verkehrsmanagements genutzt werden können.
Bone fracture patterns could be crucial in reconstructing the nature of loading, especially in the lower limb and upper limb kinematics in vehicle-pedestrian crashes. In addition, use of FE bone models can be a handy tool to predict vehicle impact velocity and the impact direction. The point of fracture initiation in bone loading has been predicted quite accurately earlier. A methodology that predicts bone crack initiation and its propagation pattern for the six known loading directions using a single material and failure model is presented.
Pedestrian and cyclist are the most vulnerable road users in traffic crashes. One important aspect of this study was the comparable analysis of the exact impact configuration and the resulting injury patterns of pedestrians and cyclists in view of epidemiology. The secondary aim was assessment of head injury risks and kinematics of adult pedestrian and cyclists in primary and secondary impacts and to correlate the injuries related to physical parameters like HIC value, 3ms linear acceleration, and discuss the technical parameter with injuries observed in real-world accidents based documented real accidents of GIDAS and explains the head injuries by simulated load and impact conditions based on PC-Crash and MADYMO. A subsample of n=402 pedestrians and n=940 bicyclists from GIDAS database, Germany was used for preselection, from which 22 pedestrian and 18 cyclist accidents were selected for reconstruction by initially using PC-Crash to calculate impact conditions, such as vehicle impact velocity, vehicle kinematic sequence and throw out distance. The impact conditions then were employed to identify the initial conditions in simulation of MADYMO reconstruction. The results show that cyclists always suffer lower injury outcomes for the same accident severity. Differences in HIC, head relative impact velocity, 3ms linear contiguous acceleration, maximum angular velocity and acceleration, contact force, throwing distance and head contact timing are shown. The differences of landing conditions in secondary impacts of pedestrians and cyclists are also identified. Injury risk curves were generated by logistic regression model for each predicting physical parameters.
Among European Countries, Spain first issued a Standard, UNE 135900:2005, further updated in 2008, that deals with homologation and effectiveness evaluation of road restraint systems components designed to reduce harm for bikers impacting on them. An in depth analysis and critical review of this standard is reported in this paper. Beside a close examination of the standard requirements, numerical models of the crash test stated by the standard have been set up and simulated to study the effects of slight speed and approach angle variations on test results, remaining within tolerance gaps allowed by the standard. Model were validated against experimental data. Together with the expected increasing severity of the impact according with speed, a strong influence of approach angle on injury parameters was found. Possible improvements to the norm, in order to make it more robust, are suggested.
The need of passive safety devices, able to reduce the accidents and the severity of injuries suffered by motorcyclist, distinctly arises from data on accident statistics. In this paper, the effectiveness of an airbag device fitted in the biker- garments has been verified through various numerical simulations. Two simple test conditions were defined, in order to investigate the performance of the device both for back and front impacts, and simulated at various impact speeds. With the aim of providing more information about the actual capability of the airbag to reduce the severity of the injuries, one of accident scenario described by ISO 13232:2005 has been also investigated, checking the real effectiveness of the airbag strap-based firing system too. Confrontation of injury indexes resulting from simulation with and without airbag made possible a realistic evaluation of the harm reduction induced by the airbag presence.
Accidents involving two wheels vehicles represent one of the more important types of accidents in Europe. These accidents are usually not easy to reconstruct specially for the analysis of the injuries and its correlation with accident dynamics and evidences. Different methodologies are applied in this work for the reconstruction of two wheeler accidents, especially accident involving motorcycles. From the typologies of road evidences like skid marks, to the use of Pc-Crash and the use of Madymo models, different reconstruction of real accidents are presented. One of the questions that sometimes arise for legal purposes when some type of head injuries arise is if the occupant was wearing or not a helmet. The correlation of head injuries with the use of the helmet is a very important issue, therefore an important legal aspect. One of the key questions for the reconstructions that is difficult to analyze, is if the vehicle occupant, was or not, wearing the helmet. Based on the previously collected information, a generic model of a helmet was developed on CAD 3D, followed by its conversion into finite elements, all in order to perform impact tests using the Madymo software that would help improve the helmet- safety, but that also can be used as a tool in accident reconstruction.
Impact severity is a fundamental measure for all in-depth crash investigation projects. One methodology used in the UK is based on the US Calspan software package CRASH3. The UK- in-depth crash investigation studies routinely use AiDamage3 a software package which is based on an updated version of the original CRASH3 algorithm, including enhancements to the vehicle stiffness coefficients. Real world accident-damaged vehicles are measured and their crush is correlated with a library of stiffness coefficients. These measurements are then used, along with other parameters, to calculate the crash energy and equivalent changes of velocity of the vehicles (delta-v), which is a measure of the impact severity. UK in-depth accident studies routinely validate the crash severity methodologies applied as the vehicle fleet changes. This is achieved by analysing crash test data and using the appropriate residual crush damage and other inputs to AiDamage3 and checking the program- outputs with the known crash severity parameters. This procedure checks, at least in part, the default stiffness values in the data libraries and the reconstruction methods used.
The focus of the technical innovation in the automobile industry is currently changing to sensor based safety systems, which are operating in the pre-crash phase of an accident. To get more information about this pre-crash phase for real accidents a simulation of this phase using the GIDAS database is done. The basics for this simulation are geometrical information about the accident location and the exact accident data out of the GIDAS database. This aggregated information gives the possibility to simulate an exact motion for every accident participant, using MATLAB / SIMULINK, in the pre-crash phase. After the simulation the information about the geometrical positions, the velocities and maneuvers of the drivers to an individual TTC (time to collision) are available. With those results it is possible to develop new useful sensor geometries using pre-crash scatter plots or estimate the efficiency of implemented active safety systems in combination with sensor characteristics. This simulation can be done for every reconstructed accident included in the GIDAS database, so these results can represent a wide spread basis for the further development of active safety systems and sensor geometries and characteristics
Pedestrian accidents are one of the major concerns related with road accidents around the world. Portugal has one of the highest rates of pedestrian fatalities in Europe. In this paper an overview conditions were the pedestrian accidents occurred in Portugal is presented. In the last years, a project related with the pedestrian accidents has run in Portugal for the period 2004-2006 where 603 people died, 2097 have been severely injured and about 17000 slightly injured. Within this project all the pedestrian accidents in this period have been analysed providing global information about a wide range of aspects, since location, driver and pedestrian characteristics, weather and road conditions, among others. In addition, 50 in-depth accidents have been investigated and the data collected according the Pendant methodology. For this in-depth methodology detailed information about the accident has been collected, including injuries, vehicle damage, road conditions and road user- behaviour and actions. An accident reconstruction has been carried for each case including the determination of the speeds and driver actions, and the analysis of the contributing factors for the accident. Depending of the accident complexity, different methodologies have been used to analyse these accident, from the classical analytical equations such as Simms and Woods, to the use of detailed computational pedestrian models as those included in the commercial software- PC-Crash-® or Madymo-®. Also one of the goals of our investigation is the development of multibody models and methodologies for the reconstruction of pedestrian accidents. Some of these tools integrated in the commercial software Cosmos Motion-® are presented. The advantages of the different approaches are compared and discussed for some of the accidents investigated. With these tools the impact speed can be determined from the projection distance with analytical tools or PC-Crash-®, but more complex tools should be used to determine speed from the injuries, what is especially important for fatal accidents. The influence of the vehicle geometry and stiffness characteristics is another aspect analysed, where the influence of the vehicle stiffness has been determined using a combined multibody-finite elements approach within the software Madymo-®.
Automotive Engineering, Mechanical Engineering and TechnologyrnAbstract: The degrees of injury severity, as a rule injuries scaled by AIS of specific regions of the human body, investigated out of road traffic accidents correspond to the body-specific loading values, which are found out with the aid of experimental or mathematical simulation of crash tests with motor vehicles or with sled tests. The coherence between the injured human being on the one hand and the physical and the theoretical model respectively on the other hand is established by the risk function, which describes the probability of degrees of injury severity in dependence on the protection criteria. Due to the different physical characteristics in the simulation, e.g. accelerations, forces, compressions and their velocity, the compilation of these quantities, comparable to the MAIS, the maximal occurred single AIS obtained in accident analysis is much more difficult in the simulation than in the accident occurrence. Therefore it is obvious to normalize the loading values gained out of simulation and to summarise them to an entire value in a suitable manner, the safety index.rn
Validation of human pedestrian models using laboratory data as well as accident reconstruction
(2007)
Human pedestrian models have been developed and improved continually. This paper shows the latest stage in development and validation of the multibody pedestrian model released with MADYMO. The biofidelity of the multibody pedestrian model has been verified using a range of full pedestrian-vehicle impact tests with a large range in body sizes (16 male, 2 female, standing height 160-192cm, weight 53.5-90kg). The simulation results were objectively correlated to experimental data. Overall, the model predicted the measured response well. In particular the head impact locations were accurately predicted, indicated by global correlation scores over 90%. The correlation score for the bumper forces and accelerations of various body parts was lower (47-64%), which was largely attributed to the limited information available on the vehicle contact characteristics (stiffness, damping, deformation). Also, the effects of the large range in published leg fracture tolerances on the predicted risk to leg fracture by the pedestrian model were evaluated and compared with experimental results. The validated mid-size male model was scaled to a range of body sizes, including children and a female. Typical applications for the pedestrian models are trend studies to evaluate vehicle front ends and accident reconstructions. Results obtained in several studies show that the pedestrian models match pedestrian throw distances and impact locations observed in real accidents. Larger sets of well documented cases can be used to further validate the models especially for specific populations as for instance children. In addition, these cases will be needed to evaluate the injury predictive capability of human models. Ongoing developments include a so-called facet pedestrian model with a more accurate geometry description and a more humanlike spine and neck and a full FE model allowing more detailed injury analysis.
This study is aimed to investigate the correlations of impact conditions and dynamic responses with the injuries and injury severity of child pedestrians by accident reconstruction. For this purpose, the pedestrian accident cases were selected from Sweden and Germany with detailed information about injuries, accident cars, and accident environment. The selected accident cases were reconstructed using mathematical models of pedestrian and passenger car. The pedestrian models were generated based on the height, weight, and age of the pedestrian involved in accidents. The car models were built up based on the corresponding accident car. The impact speeds in simulations were defined based on the reported data. The calculated physical quantities were analyzed to find the correlation with injury outcomes registered in the accident database. The reconstruction approaches are discussed in terms of data collection, estimating vehicle impact speeds, pedestrian moving speeds and initial posture, secondary ground impact, validity of the mathematical models, as well as impact biomechanics.