Konferenzveröffentlichung
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (637) (entfernen)
Schlagworte
- Conference (386)
- Konferenz (382)
- Germany (212)
- Deutschland (209)
- Unfall (188)
- Accident (187)
- Safety (123)
- Sicherheit (122)
- Injury (117)
- Verletzung (117)
Institut
In Germany averagely two million traffic accidents happen each year and emergency medical services are called to more than 400 000 patients. Even though this number is decreasing continuously (due to improvements in the fields of vehicle safety, road construction, and accident prevention) every case is yet a challenge for the rescuers and requires improvements in emergency medicine as well. Especially during diagnostics right at the accident scene, there are only limited instruments available to gain the necessary knowledge of the injuries suffered, to come to essential decisions about treatment or transport. To provide an additional diagnostic aid by scouting and estimating the situation, a software-tool calculating the likeliness of the most frequent severe injuries (AIS 3-6) of front occupants in passenger cars has been developed to deliver this necessary information about particular accident scenarios. To achieve this, logistic likelihood functions have been calculated in a multivariate regression analysis analysing all AIS 3+ injuries in the GIDAS database of the years 1999-2006 that happened more than four times
Each year the traffic accident research teams in Dresden and Hanover provide an in-depth investigation of approximately two thousand accidents, aggregated in the GIDAS database. To accomplish a comprehensive review of each traffic accident recorded, a sensible and thorough encoding of suffered injuries is indispensable. The Abbreviated Injury Scale by AAAM offers a valuable and handy solution to achieve this goal. However, there were a few difficulties in the use of the AIS that came up in the past, which let to necessary improvements for the utilization of the AIS 2005 for GIDAS.
The purpose of this study was to analyse the actual injury situation of bicyclists regarding accidents involving more than one bicyclist. Bicyclists were included in a medical and technical analysis to create a basis for preventive measures and discovered repeating accident patterns and circumstances such as daytime, environment, helmet use rate. Technical and medical data were collected at the scene, shortly after accident. The population was compared focusing on bicycle versus bicycle accidents. Technical analysis included speed at crash, type of collision, impact angle, environment, used lane and relative velocity. Medical analysis included injury pattern and severity (AIS, ISS). Included were 578 injured bicyclists in 289 accidents from years 1999 to 2008, 61 percent were male (n=350) and 39 percent female (n=228). Sixty-seven percent ranged between 18 to 64 years of age, twelve percent each between 13 to 17 years of age and older than 65 years, eight percent between 6 to 12 years and one percent between 2 to 5 years.. Crashes took place in urban areas in 92 percent, in rural areas in 8 percent. Weather conditions were dry lanes in 97 percent and wet conditions in 3 percent. Eighty-three percent of all accidents happened during daytime, ten percent during night, and seven percent during dawn. The helmet use rate was only 7,5 percent in all involved bicyclists. The mean Maximum Abbreviated injury scale, Injury severity score was 1,31. Bicyclists are still minimally- or unprotected road users. The helmet use rate is unsatisfactorily low. The incidence of bicycle to bicycle crashes is high. Most of these accidents take place in urban areas. The level and pattern of injuries is moderate. Most of the more severe injuries occur to the head and could have been avoided by frequent helmet use.
Still correlated with high mortality rates in traffic accidents traumatic aortic ruptures were frequently detected in unprotected car occupants in the early years. This biomechanical analysis investigates the different kinds of injury mechanisms leading to traumatic aortic injuries in todays traffic accidents and how the way of traffic participation affects the frequency of those injuries over the years. Based on GIDAS reported traffic accidents from 1973 to 2014 are analyzed. Results show that traumatic aortic injuries are mainly observed in high-speed accidents with high body deceleration and direct load force to the chest. Mostly chest compression is responsible for the load direction to the cardiac vessels. The main observed load vector is from caudal-ventral and from ventral solely, but also force impact from left and right side and in roll-over events with chest compression lead to traumatic aortic injuries. Classically, the injury appeares at the junction between the well-fixed aortic arch and the pars decendens following a kind of a scoop mechanism, a few cases with a hyperflexion mechanism are also described. In our analysis the deceleration effect alone never led to an aortic rupture. Comparing the past 40 years aortic injuries shift from unprotected car occupants to today's unprotected vulnerable road users like pedestrians, cyclists and motorcyclists. Still the accident characteristics are linked with chest compression force under high speed impact, no seatbelt and direct body impact.
Ruptures and dissections of the thoracic and abdominal aortic vessel caused by traffic accidents are rare but potentially life-threatening injuries. They can occur by blunt trauma via seat belt or dashboard injury. The study aimed at evaluating the overall mortality, morbidity, neurological disorders, and differences in operative procedures of open repair and stenting. It shows that, with a change and improvement in diagnostic tools and surgical approach, mortality and morbidity of blunt aortic injuries were significantly reduced. Still an immediate life-threatening injury early diagnosis via multiple-slice and scans and surgical repair with minimally invasive stents showed excellent short-time results for selected patients.
It has been pointed that most of the accidents on the roads are caused by driver faults, inattention and low performance. Therefore, future active safety systems are required to be aware of the driver status to be able to have preventative features. This probe study gives a system structure depending on multi-channel signal processing for three modules: Driver Identification, Route Recognition and Distraction Detection. The novelty lies in personalizing the route recognition and distraction detection systems according to particular driver with the help of driver identification system. The driver ID system also uses multiple modalities to verify the identity of the driver; therefore it can be applied to future smart cars working as car-keys. All the modules are tested using a separate data batch from the training sets using eight drivers" multi-channel driving signals, video and audio. The system was able to identify the driver with 100% accuracy using speech signals of length 30 sec or more and a frontal face image. After identifying the driver, the maneuver/ route recognition was achieved with 100% accuracy and the distraction detection had 72% accuracy in worst case. In overall, system is able to identify the driver, recognize the maneuver being performed at a particular time and able to detect driver distraction with reasonable accuracy.
The head impact of pedestrians in the windscreen area shows a high relevance in real-world accidents. Nevertheless, there are neither biomechanical limits nor elaborated testing procedures available. Furthermore, the development of deployable protection systems like pop-up bonnets or external airbags has made faster progress than the corresponding testing methods. New requirements which are currently not considered are taken into account within a research project of BASt and the EC funded APROSYS (Advanced PROtection SYStems) integrated project relating to passive pedestrian protection. Testing procedures for head impact in the windscreen area should address these new boundary conditions. The presented modular procedure combines the advantages of virtual testing, including full-scale multi-body and finite element simulations, as well as hardware testing containing impactor tests based on the existing procedures of EEVC WG 17. To meet the efforts of harmonization in legislation, it refers to the Global Technical Regulation of UNECE (GTR No. 9). The basis for this combined hardware and virtual testing procedure is a robust categorization covering all passenger cars and light commercial vehicles and defining the testing zone including the related kinematics. The virtual testing part supports also the choice of the impact points for the hardware test and determines head impact timing for testing deployable systems. The assessment of the neck rotation angle and sharp edge contact in the rear gap of pop-up bonnets is included. For the demonstration of this procedure, a hardware sedan shaped vehicle was modified by integrating an airbag system. In addition, tests with the Honda Polar-II Dummy were performed for an evaluation of the new testing procedure. Comparing these results, it was concluded that a combination of simulation and updated subsystem tests forms an important step towards enhanced future pedestrian safety systems considering the windscreen area and the deployable systems.
Since 2005, the motorcycle crash fatalities in the US exceeded 10% of the overall annual traffic fatalities. Consequently, it has become critical to gain in-depth understanding of the factors and characteristics contributing to motorcycle crashes. Unfortunately, there currently exists no database gathering the necessary information for an in-depth analysis of the US motorcycle crashes. So this study utilizes the NASS/CDS database (National Automotive Sampling System, Crashworthiness Data System) in order to gain insights into the patterns and factors leading to a NASS/CDS motorcycle crash, from 1997 to 2007. NASS/CDS samples about 5,000 passenger car tow-away crashes per year. Each case includes photographs and detailed data on crash and pre-crash characteristics, vehicle types, trajectories, types of impact, and other pertinent roadway and crash scene information, allowing an in-depth investigation of the crash mechanisms. However, the NASS/CDS sampling process specifically focuses on passenger car crashes, so the cases extracted only correspond to crashes in which a passenger vehicle was towed, and a motorcycle was somehow involved. Thus, a by-hand in-depth review of about 200 cases allowed retrieving 106 relevant crashes for this study, tending to represent the severe passenger vehicle(s) versus motorcycle(s) crashes on US roads. The findings lead to the conclusion that these crashes mostly result from the low conspicuity of the motorcycle, and from the inability of the car drivers to fully appreciate and anticipate the behavior of a motorcycle. Indeed, it has been shown that, first, the car drivers involved in these cases did not attempt any avoidance maneuver, second, they were largely of ages under 25, and finally, the majority of the crashes were in an intersection scenario. In addition, the two major scenarios unveiled were the car attempting a left turn from the opposite direction and the car attempting a left turn from the right. The paper mentions several solutions to enhance the motorcycle- conspicuity and to allow the car drivers to better anticipate its behavior, which seem to be key factors in the intersection-related crashes (and more generally in the passenger vehicle(s) versus motorcycle(s) crashes).
The performance of asphalt by low temperatures is largely determined by the viscosity of the binder respectively the mortar of the asphalt. The traditional test methods for binder (e.g. ball-draw viscosimeter) are limited to temperatures above the service range of temperature for an asphalt construction. The Dynamic Shear Rheometer (DSR) is limited to temperatures above 30-°C whereas the Bending Beam Rheometer (BBR) is limited to temperatures below -10-°C and not applicable to mortar. Especially the gap in the temperature of these test methods is very important to characterize the viscosity behavior of binder and mortar over the whole range of the service temperatures, which represent the typical environmental conditions of over the seasons, for an asphalt construction. Tension retardation experiments seem to be very useful to bridge the gap. They address the low temperature behavior of binder and mortar. With this test method the flow characteristics of binder (pen grade and any modification) and any kind of mortar in the service temperature range, in particular at low temperatures of -25-°C can be determined with a high precision, and assessed, via the physically interpretable material characteristics quantity of tension viscosity. Furthermore the present findings indicate the potential of extrapolation the results of the Tension retardation for a prediction of the rutting resistance of asphalt mixtures. As part of several research Projects, BASt (Federal Highway Research Institute) investigated the effects of different modifications of the binder to low temperature behavior of the binder by the tension retardation test. This paper is intended to provide a more detailed description of the test method Tension Retardation, selected results and related findings.
Die fatalen langen Wege – Defizite in der Informationserfassung und bei der Informationsbearbeitung
(1985)
Die Meldewege – und damit die Laufzeit von Verkehrsmeldungen – sind häufig sehr lang. Mit der Folge, dass eine Nachricht vom Autofahrer manchmal geradezu als Falschmeldung empfunden wird, weil sich die beschriebene Verkehrssituation in der Zwischenzeit wieder geändert hat. Die Erfassung und Meldung von Verkehrsinformationen muss daher verbessert werden mit dem Ziel, dass der Kraftfahrer die für ihn wichtige Information genau zu dem Zeitpunkt erhält, an dem er sie braucht, und dass ihn möglichst nur die für ihn selbst relevanten Meldungen erreichen. Schließlich muss vor der Entscheidung über die Empfehlung von Umleitungen jeweils der Verkehrszustand auf den Alternativrouten geprüft werden, damit der Autofahrer nicht womöglich vom Regen in die Traufe gerät.
Wetterbeobachtungen zeigen, dass sich das Klima in den letzten Dekaden gewandelt hat. Unter ökonomischen und unter strategischen Gesichtspunkten bedeutsam ist die zukünftige Entwicklung von extremen Wetterereignissen wie Starkniederschlägen, Hitzewellen oder Überschwemmungen. Die wissenschaftlichen Grundlagen eines vermuteten menschlichen Einflusses auf das Klima analysiert seit 1988 der "Zwischenstaatliche Ausschuss zum Klimawandel" (Intergovernmental Panel on Climate Change, IPCC). Vom IPCC werden unter anderem Projektionen von möglichen zukünftigen Klimaentwicklungen erstellt. Um spezielle Regionen detaillierter zu untersuchen und eine Brücke zwischen globalen Klimaänderungen und lokalen Konsequenzen zu schlagen, werden regionale Klimamodelle verwendet. In der BASt wurde 2009 eine Arbeitsgruppe "Klima" eingerichtet, die eine Risiko-Identifikation in verschiedenen Bereichen der Straßeninfrastruktur und des Straßenverkehrs durchführt. Ziel dieser Arbeitsgruppe ist die Minderung der Verwundbarkeit gegenüber den Folgen des Klimawandels durch die Identifikation regionaler und lokaler Schwachstellen und deren Zusammenführung mit dem Bundesfernstraßennetz. In einem von mehreren Pilotprojekten werden die Risiken von Hang- und Böschungsrutschungen durch die Zunahme von Extremwetterereignissen abgeschätzt. Fernziel ist die Erstellung eines Risikokatasters zur Identifizierung der durch Hangrutschungen besonders gefährdeten Bereiche des Bundesfernstraßennetzes.
Für den Einsatz im Erdbau des Straßenbaus müssen die eingesetzten Geokunststoffe hohen Qualitätsansprüchen genügen. Das Straßenbauregelwerk ist durch die Veröffentlichung der "Zusätzlichen Technischen Vertragsbedingungen und Richtlinien für Erdarbeiten im Straßenbau" (ZTV E-StB 09) in dieser Hinsicht nun vollständig, so dass eine lückenlose Nachverfolgung der Produkte von der Herstellung über die Lieferung bis zum Einbau möglich ist. Wichtig ist jedoch die Einhaltung der Vorschriften und Anforderungen, angefangen beim Hersteller über den Lieferanten, über den Auftragnehmer bis hin zum Auftraggeber, um einen hohen Qualitätsstandard des Produktes und der fertigen Leistung zu garantieren. Hersteller, deren Produkte einer freiwilligen Überwachung unterliegen, können diese Produkte mit einem Qualitätssiegel kennzeichnen und liefern zusammen mit der CE-Kennzeichnung ein Produktzertifikat. Da in diesem Fall auf die Baustoffeingangsprüfung verzichtet werden kann, reduziert sich der finanzielle und zeitliche Prüfaufwand und es wird ein reibungsloser Bauablauf erzielt.
Federal highway A 26 in Germany : reinforced dams in soft soils - control method according DIN 1054
(2004)
In 2001 the construction of the Federal Highway A 26 in Lower Saxony (north of Germany) was started. In this area the underground is without any substantial bearing capacity as it consists of soft layers ( clay, peat) with a thickness of up to 12 m. Because it was not possible to exchange the soil neither completely nor partially pre-loading procedure (consolidation method) was chosen for this construction. Short- and long-term stability are ensured by the use of high-tensile fabrics for reinforcement at the dam basis. The vertical and horizontal deformations and the stress changes in the soil, caused by the pre-load procedure, has to be controlled by special geotechnical measurements. Additionally, in the higher parts of the dam the strain behaviour of the high-tensile fabrics is measured. These measurements form the basis for the application of the control method according DIN 1054. In this article, the special circumstances of this project are described. Further on the geotechnical measurements, the winning and evaluation of the necessary parameters of the subsoil, and the consequences of these data for the ongoing of the project are laid down. Intermediate results of the geotechnical measurements are described.
Regarding to the German road traffic licensing regulations it is mandatory to have a light system using a bicycle in public traffic. All attached components must be approved. The admission requires additional restrictions such as a dynamo as energy source with a nominal voltage of 6 V. Batteries are only allowed in addition to this. To adopt the German bicycle regulation to the state of art of an energy efficient lighting, additional power sources such as a battery respectively rechargeable batterie should be evaluated. The project will propose amendments for German Road Traffic Regulations and technical requirements.
Die Kommunikation zwischen Fahrzeugen und Infrastrukturkomponenten steht vor der Einführung in Europa. Dieser Beitrag stellt zunächst die grundlegende Technologie zum Austausch von Nachrichten und ein Pilotprojekt vor, innerhalb dessen eine sichere Fahrzeug-zu-Infrastruktur Kommunikation konzipiert und praktisch erprobt wird. Darauf aufbauend werden Sicherheitsfragestellungen von Infrastrukturkomponenten beleuchtet und ein Einblick in das Schlüsselmanagement sowohl für Fahrzeuge als auch Infrastrukturkomponenten gegeben.
Nach Aussonderung wegen Nichterfüllens der Eingangskriterien wurden die restlichen 16 Methadon-substituierten Patienten sechs Leistungstests unterzogen (Einhalten der Fahrspur, Entscheidungs- und Reaktionsverhalten, tachistoskopischer Auffassungstest, Daueraufmerksamkeit, periphere Wahrnehmung und reaktive Belastbarkeit) und die Ergebnisse mit denen einer früheren Untersuchung verglichen. Die aktuelle Patientengruppe zeigte weniger Bremsungen und weniger Beschleunigungen, beim Entscheidungs- und Reaktionsverhalten wies sie eine signifikant höhere Anzahl von Reaktionsfehlern auf. Ansonsten wurden nur noch Unterschiede bei der reaktiven Belastbarkeit gefunden, hier schnitt die aktuelle Gruppe ebenfalls schlechter ab als die frühere. Zusammenfassend ist festzustellen, dass zwar die meisten mit Methadon substituierten Patienten schlechtere Ergebnisse erreichen als Normalprobanden, dass jedoch einzelne Patienten den Normalprobanden vergleichbare Leistungen erbringen. Insofern hat sich die auch im Gutachten Krankheit und Kraftverkehr niedergeschlagene Auffassung bestätigt, dass unter bestimmten Voraussetzungen zumindest einzelnen Substituierten die Fahreignung zugesprochen werden kann.
25 Studien, bei denen gesunde Probanden eine Einmaldosis von 15 mg Diazepam erhielten und insgesamt 417 Leistungstests absolvierten, zeigten bei 38 Prozent der Tests signifikant schlechtere Ergebnisse. 10 Stunden nach der Einnahme fanden sich keine verschlechterten Ergebnisse mehr, die Leistungseinbußen konzentrierten sich auf die ersten vier Stunden nach Applikation. Ab der 5. Stunde liegt der Prozentsatz der Einschränkungen unter der 20-Prozent-Marke. Entsprechende Versuche mit 10 weiteren Benzodiazepinen machten deutlich, dass sich die Hypothese von zwei Gruppen von Benzodiazepinen formulieren lässt. Bei der einen Gruppe (typischer Vertreter: Diazepam) ergeben sich leicht ausgeglichene Leistungskurven in Abhängigkeit von der Dosis. Ein Vertreter der 2. Gruppe (Nitrazepam) bewirkte bei doppelter Dosis nicht nur einen deutlich höheren Prozentsatz signifikant schlechterer Testergebnisse, sondern auch die Zeit relevanter Einschränkungen war deutlich verlängert.
Fire incidents are among the most relevant for people in a tunnel. Therefore, it is important to be sufficiently prepared for such events. A large scale fire test is to be used to help evaluate the initial burning duration and the time it takes for the fire to spread to other vehicles in the tunnel, and in particular how long it takes for a truck carrying wooden pallets to catch fire, taking into consideration the extremely high temperatures. The goal, therefore, is to determine the time it takes for a fire to spread to other vehicles in the tunnel. In the large scale fire test, an accident in a tunnel with one-way traffic is simulated between a truck loaded with approximately 3.7 t of wooden Europol pallets and a passenger car. Directly behind each of the vehicles involved in the accident there is another car which stops at a distance of 1.0 m. Approximately 300 litres of burning diesel are discharged from the truck's fuel tank, which is simulated by using approximately 400 litres of isopropanol. A 10 m-² burning pool forms underneath the truck. Other objectives of the large scale fire test are the validation of the CFD models and the evaluation of the progression of the thermal release ratios estimated for the simulation. The thermal release ratios generated in the test are determined and evaluated using various models.
Absturzsicherung auf Brücken
(2008)
Der Beitrag behandelt den aktuellen Stand der Normung und Ausführung von Absturzsicherungen auf Brücken. Zu den Absturzsicherungen gehören sowohl die Fahrzeug-Rückhaltesysteme als auch Geländer, die den Absturz von Personen verhindern sollen. Die verschiedenen Fahrzeug-Rückhaltesysteme sind: Stahlschutzplanken, Betonschutzwände, transportable Schutzwände und Anpralldämpfer. Die zugehörigen Regelungen finden sich in den Richtlinien für passive Schutzeinrichtungen an Straßen (RPS), die derzeit an die Europäische Norm EN 1317 Rückhaltesysteme an Straßen angepasst werden. Die nationalen Regelwerke müssen auf die in der Europäischen Norm vorgegebenen Leistungsklassen, die die bisherigen Beschreibungen der Schutzsysteme ersetzen, Bezug nehmen. Die dabei zu berücksichtigenden Leistungsmerkmale sind: Aufhaltevermögen, seitliche Auslenkung und Insaßenbelastung. Damit der Anwender Systeme zielgerichtet auswählen kann, sind für alle Schutzsysteme Anprallversuche erforderlich, mit denen das System in eine Aufhalteklasse eingestuft wird. In einer Tabelle werden die Aufhalteklassen (N1, N2; H1,H2,H3; H4a und H4b) mit den bei den Anprallprüfungen einzuhaltenden Versuchsparametern aufgelistet. Normales Aufhaltevermögen gewährleisten die Klassen N1 und N2, höheres Aufhaltevermögen die Klassen H1 bis H3 und sehr hohes Aufhaltevermögen die Klassen H4a und H4b. Am Fahrbahnrand von Brücken wird bei Autobahnen und autobahnähnlichen Straßen im Normalfall die Aufhaltestufe H2 gefordert; bei besonderer Gefährdung Dritter unter der Brücke jedoch H4b. Bei den übrigen Straßen reichen, abhängig vom Schwerverkehrsanteil, die Aufhaltestufen H1 beziehungsweise H2. Da Leistungsanforderungen an die Systeme der Schutzeinrichtungen auf Brücken gefordert werden, sind vom Hersteller Nachweise der auf das Bauwerk einwirkenden Kräfte beim Fahrzeuganprall zu führen.
The price of a new car increased almost every year for a long period. In recent years however, the budget available to most people for purchasing a car either did not grow or became even smaller. Therefore it was in the interest of some OEMs to offer economical car models in the so-called "8,000- Euro class". Here an important question arose regarding the safety of these vehicles. There is no question that the very high safety level of cars reached in Europe during the last decades should not be sacrificed as a consequence of smaller budgets. Customers with sense of responsibility have the right to be properly informed about the balance between safety and price so that they can make a deliberate decision when buying either a new or a used car. Against this background, the German magazine "AutoBILD" commissioned DEKRA to conduct fullscale frontal crash tests with a view to publishing the results. These tests have been carried out in accordance with the corresponding Euro NCAP crash test requirements and performance criteria. The tested vehicles were two new Logans produced by the manufacturer Dacia, two used cars of the type VW Golf IV (registration date 2000) and one new VW Fox. This paper describes the safety features of the vehicles and the results of the five crash tests to demonstrate state-of-the-art safety levels and what levels may be expected from vehicles in the "8,000- Euro class". Looking at real-world crashes it is of interest to think about future trends in a more detailed manner. Therefore it will be more and more necessary to supplement the federal statistics with more detailed in-depth information about the consequences of accidents and the safety performance of crashed vehicles.