Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (58)
- Buch (Monographie) (18)
- Wissenschaftlicher Artikel (15)
- Bericht (3)
- Teil eines Buches (Kapitel) (1)
- Arbeitspapier (1)
Schlagworte
- Datenbank (96) (entfernen)
The sequence of accident events can be classified by three essential phases, the pre-crash-sequence, the crash-sequence and the post-crash-sequence. The level of reliability of the information in the GIDAS-database (German In Depth Accident Study) is provided predominantly on the passive side. The period to evaluate active safety systems begins already in the pre-crash-sequence. The assessment of the potential of sensor- or communication-based active safety systems can only be accomplished by a detailed analysis of the pre-crash-phase. Hence the necessity to analyze the early period of the accident event in detail arises. This is possible with the help of the digital sketches of the accident site and the simulation of the accident by a simulation method of the VUFO GmbH. After simulating the pre-crash scenario it is possible to generate additional and standardized data to describe the pre-crash-sequences of an accident in a very high detail. These data are documented in a second database called the GIDAS Pre-Crash-Matrix (PCM). The PCM contains various tables with all relevant data to reproduce the pre-crash-sequence of traffic accidents from the GIDAS database until 5 seconds before the first collision. This includes parameters to describe the environment data, participant data and motion or dynamic data. This paper explains the creation of the PCM, the simulation itself and the contents and structure of the PCM. With this information of the pre-crash-sequence for various accident scenarios an improved benefit estimation and development of active safety systems can be made possible.
To date, the Trauma Registry (TraumaRegister DGU-® contains data of approximately 100.000 severely injured patients, 65% of which suffered from a road traffic crash. Thus, it is the world's largest data base for severely injured patients. The article describes the development of the registry and explains how it was rolled out over Germany using the established structure of the German Trauma Network (TraumaNetzwerk DGU-®). In addition, this article presents three typical use cases from the fields of quality management, policy making and system-wide interventions, clinical research and injury prevention. In conclusion, the TraumaRegister DGU-® is a well-established tool for various purposes related to the control and reduction of the burden of road injury. Its ongoing expansion to other countries will support the goal of international benchmarking of hospitals and trauma systems.
In 2012 the fifth ESAR conference (Expert Symposium on Accident Research) was held in Hannover. ESAR is an international convention of experts, who analyze traffic accidents all over the world and discuss their results in this context, conducted at the Medizinische Hochschule Hannover every 2 years. It connected representatives of public authorities, engineers in automotive development and scientists and offers a forum with particular emphasis on In-Depth-Analyses of accident statistics and accident analyses. Special focus is placed on research on the basis of so-called "In-Depth-Accident-Investigations" [data collections at the sites of the accidents], which are characterized by extensive documentations of the sites of the accidents, of the vehicles as well as of the injuries, encompassing several scientific fields. ESAR aims at a multi-disciplinary compilation of scientific results and at discussing them on an international, scientific level. It is thus a scientific colloquium and a platform for exchanging information for all accident researchers. Experiences in accident prevention as well as in the complex field of accident reconstruction are stated and new research fields are added. Existing results of long-term research work in Europe, the US, Australia and Japan include different infrastructural correlations and give findings on population, vehicle population and driver characteristics, which offer a basis for recommendations to be derived and measures for increasing road safety.
Die Bundesanstalt fuer Straßenwesen wurde vom Bundesministerium fuer Verkehr mit der Konzeption eines Managementsystems der Erhaltungsplanung fuer Brücken- und Ingenieurbauwerke des deutschen Fernstraßennetzes beauftragt. Dabei sollte ein System konzipiert werden, welches zum einen den Bund in die Lage versetzt, neben einem Überblick über den aktuellen Zustand der Bauwerke auf Netzebene auch Aussagen zum Finanzbedarf zu erlangen und Strategien, langfristige Ziele sowie Rahmenbedingungen in der Erhaltungspraxis zu verwirklichen. Zum anderen sollten Ländern und Behörden Empfehlungen zur Durchführung von Verbesserungen auf Objektebene geliefert werden, die mit den Strategien, langfristigen Zielen, Rahmenbedingungen und Haushaltszwängen vereinbar sind. In einem ersten Schritt wurden bestehende Bauwerks-Managementsysteme analysiert sowie aktuelle Entwicklungstendenzen aufgezeigt. Das aktuelle Vorgehen von Bund und Ländern bei der Erhaltungsplanung wurde im Rahmen einer Länderbefragung im Detail bestimmt. Dabei wurden auch die Zielvorstellungen der Betreiber eines zukünftigen Managementsystems der Bauwerkserhaltung identifiziert. Aufbauend auf diesen Erkenntnissen sowie einer bereits entwickelten Grobkonzeption des BMS wurden die Strukturen des Managementsystems erarbeitet, einzelne Module festgelegt und die Abläufe der Erhaltungsplanung unter Berücksichtigung von Randbedingungen und Zielkriterien erarbeitet. Ein wesentliches Ergebnis neben der Konzeption ist die Erarbeitung eines Stufenplans mit Zeitachse für die Entwicklung des Managementsystems sowie die Formulierung von Teilprojekten zur Fertigstellung des Systems mit Zeitplan. Aufbauend auf diesen Planungen ist die Realisierung eines kompletten BMS für Bund und Länder bis zum Jahr 2005 möglich. Stufe 0: Ausgangsbasis, Grundlagen für einen Verteilungsschlüssel für Finanzmittel des Bundes, sofort möglich. - Stufe 1: Grundlage für netzweite Bewertungen und Analysen auf Länder- und Bundesebene, ab 2000 - Stufe 2: Grundlage für die Dringlichkeitsreihung und die Bewertung von Maßnahmevarianten, ab 2001 - Stufe 3: Grundlage für die Bedarfsermittlung und die Finanzplanung, ab 2003 - Stufe 4: Programmplanung mit Restriktionen, Verknüpfung von Managementsystemen, ab 2005. Voraussetzung ist jedoch die Bereitstellung ausreichender Finanzmittel beim BMVBW oder der BASt sowie die Bereitstellung aller erforderlicher Daten (ASB, Teilsystem Bauwerksdaten, Verkehrsdaten, Unfalldaten, Netzdaten usw.) durch die Länder. Hierbei wäre die Unterstützung des Bundes hilfreich.
The role of a national motor vehicle crash causation study-style data set in rollover data analysis
(2010)
On 1 January 2005, The National Highway Traffic Safety Administration, an agency of the United States Department of Transportation, implemented a new data collection strategy designed to assess crash avoidance technologies and report associated behavioral inputs and outcomes. The original goal was a six-year program, however, during the shortened data collection period; it proved a valuable resource for understanding a precrash environment previously obscured by forensic case investigation. Another unintended consequence was an overlap with infrastructure, roadway geometry, and design with the occupant and vehicle outcomes, by virtue of well-defined attributes. External to the collected data, supplementary information was extrapolated, by using manuals published in the United States, by the American Association of State Highway Transportation Officials and selected State Departments of Transportation, in conjunction with the National Motor Vehicle Crash Causation Study (NMVCCS). This provided a backdrop to the infrastructure framework of the rollover problem within which the occupant and vehicle outcomes were studied. If a NMVCCS-style data collection were to be implemented elsewhere, then complementary manuals produced by federal transportation officials might be consulted producing similar relationships. The current study uses NMVCCS data to describe vehicles travelling through diverse design geometries and the outcome for occupants involved in crashes within that system. Codified and extrapolated data form the basis for assessing NMVCCS and its value to the transportation safety community, as the protocols are applicable universally. The benefit in continuing a NMVCCS-style study is noted, as the interaction of roadway infrastructure and occupant protection agencies might find paths to better work together in solving the complex rollover problem using a common data-driven approach.
Von Seiten der Straße ist die geometrische Feingestalt der Oberfläche, die als Textur bezeichnet wird, die Primärgröße für die Griffigkeit und die Geräuschemission. In Großbritannien und Frankreich werden Anforderungen an die Griffigkeit bzw. an die Makrotexturtiefe für verschiedene Straßenkategorien sehr detailliert vorgeschrieben. In Frankreich wird bei der Abnahme von neugebauten Straßen sogar auf eine Griffigkeitsmessung verzichtet, zur Beurteilung reicht hier eine Texturmessung aus. In den einschlägigen deutschen Vorschriften (ZTV Asphalt/Beton StB 01) sowie für die Zustandserfassung und "bewertung (ZEB) von Bundesfernstraßen sind die Abnahme- und Gewährleistungswerte bzw. die Ziel-, Warn- und Schwellenwerte für die Griffigkeit definiert. Für die Geräuschemission sind bisher vergleichbare Messungen nicht vorgesehen. Vor dem Hintergrund wachsender Bedeutung der Geräuschbelastung durch den Straßenverkehr kann hier eine Änderung erwartet werden. Zur Bestimmung des Geräuschpotenzials einer Straßenoberfläche könnte dann eine Messung akustisch relevanter Textureigenschaften erfolgen. Bisher wurde zur qualitativen Einschätzung des Rollgeräuschpegels über die Analyse der Textur nur wenig Grundlagenforschung betrieben und weder allgemein gültige Texturmerkmale noch Grenzwerte bestimmt. Somit war es das Ziel des vorliegenden Forschungsvorhabens, anhand der im Rahmen des AP-Projektes 03/330 "Erfassung und Bewertung der Texturen von Fahrbahnoberflächen" und neu entwickelten Texturkenngrößen eine Klassifizierung von Straßenbelägen zu erreichen sowie die Messgenauigkeit und die Reproduzierbarkeit der Texturmessungen zu untersuchen. Darüber hinaus sollten durch diese Untersuchungen Voraussetzungen geschafft werden, um die Textur, bzw. Texturkennwerte mit Reifen-Fahrbahn-Geräuschen zu verknüpfen und den Aufbau einer Datenbank für Parameter von klassifizierten Straßenoberflächentexturen vorzubereiten. Es wurde ein aus drei Teilen bestehendes Untersuchungsprogramm erarbeitet. Darin wurden Untersuchungen unter Wiederhol- und Vergleichsbedingungen auf den neun Testfeldern aus Asphalt und Beton des Versuchsgeländes in Sperenberg vorgesehen. Hierbei sollten die Messungen mit den optischen zwei- und dreidimensionalen (2D- und 3D-) Texturmessgeräten der BASt durchgeführt werden. Anschließend wurden die Messergebnisse mit den in der BASt entwickelten Auswerteprogrammen BATex ausgewertet. Der Informationsgehalt der Texturmessung ist eine entscheidende Voraussetzung für die Aussagekraft einer Kenngröße über die erfassten Oberflächeneigenschaften. Unter Verwendung der flächenhaft berechneten geometrisch und akustisch relevanten Texturkenngrößen wurden im vorliegenden Bericht die erweiterte Messunsicherheit und die Reproduzierbarkeit der 3D-Texturmessungen ermittelt. Mit den Ergebnissen dieser Untersuchungen konnten der Zusammenhang zwischen den wichtigsten Gebrauchseigenschaften von Straßen, die mittels der Texturkenngrößen (Oberflächenprofilgleichmäßigkeitskoeffizient Vz0, geschätzte Texturtiefe ETDi, maximale spektrale Rauheitstiefe Amax, bewährter Gestaltfaktor GF5/95) und des Vorbeirollpegels (L Ì…) beschrieben wurden, quantifiziert und eine Klassifizierung von gemessenen Fahrbahnbelägen erreicht werden. Für die praktischen Zwecke können die gewonnenen Erkenntnisse bei der Bewertung von gemessenen Fahrbahnoberflächen eingesetzt werden, um einen ersten Einblick über die akustischen Eigenschaften aufgrund der Texturmessungen zu erhalten. Der theoretisch mögliche Vorbeirollpegel, der mittels des Vz0-Wertes abgeschätzt werden kann, ist dabei ein Maß für die akustischen Eigenschaften.
In order to enable foreseeing or comparing the benefit of safety systems or driver assistance systems in Germany, in the United States and in Japan, the traffic accident databases in those three countries are examined. The variables used are culpable party, collision partner, accident type, and injury level and the method to re-classify the databases for comparison are proposed. The result indicates that single passenger car fatality is the most frequent in Germany and in the United States, while passenger car vs. pedestrian is the most frequent fatality scenario in Japan. When the casualty by fatality ratio is focused, the greatest difference is observed in rear-end collisions. The ratio of slight injuries in Japan yields about eighteen times as many as those in Germany, and about eight times as many as those in the United States.
An eCall device has been mounted on some vehicles in France since 2003. It is an integrated car radio/GSM/GPS system that can be used with a SIM card. When an accident occurs, a call can be sent manually or automatically made to a telephone call centre. Knowing the geographic location, the vehicle identity and the possibility of a direct communication with the people involved enables the nearest emergency services to be called out. In this context, the LAB / CEESAR have set up a study aimed at evaluating the effectiveness of this system. The purpose of this paper is to detail the E-call system evaluation method of effectiveness used and give a global synthesis of the results.
Impact severity is a fundamental measure for all in-depth crash investigation projects. One methodology used in the UK is based on the US Calspan software package CRASH3. The UK- in-depth crash investigation studies routinely use AiDamage3 a software package which is based on an updated version of the original CRASH3 algorithm, including enhancements to the vehicle stiffness coefficients. Real world accident-damaged vehicles are measured and their crush is correlated with a library of stiffness coefficients. These measurements are then used, along with other parameters, to calculate the crash energy and equivalent changes of velocity of the vehicles (delta-v), which is a measure of the impact severity. UK in-depth accident studies routinely validate the crash severity methodologies applied as the vehicle fleet changes. This is achieved by analysing crash test data and using the appropriate residual crush damage and other inputs to AiDamage3 and checking the program- outputs with the known crash severity parameters. This procedure checks, at least in part, the default stiffness values in the data libraries and the reconstruction methods used.
The focus of the technical innovation in the automobile industry is currently changing to sensor based safety systems, which are operating in the pre-crash phase of an accident. To get more information about this pre-crash phase for real accidents a simulation of this phase using the GIDAS database is done. The basics for this simulation are geometrical information about the accident location and the exact accident data out of the GIDAS database. This aggregated information gives the possibility to simulate an exact motion for every accident participant, using MATLAB / SIMULINK, in the pre-crash phase. After the simulation the information about the geometrical positions, the velocities and maneuvers of the drivers to an individual TTC (time to collision) are available. With those results it is possible to develop new useful sensor geometries using pre-crash scatter plots or estimate the efficiency of implemented active safety systems in combination with sensor characteristics. This simulation can be done for every reconstructed accident included in the GIDAS database, so these results can represent a wide spread basis for the further development of active safety systems and sensor geometries and characteristics