Sonstige
Filtern
Erscheinungsjahr
- 2005 (59) (entfernen)
Dokumenttyp
- Konferenzveröffentlichung (37)
- Buch (Monographie) (14)
- Wissenschaftlicher Artikel (7)
- Arbeitspapier (1)
Schlagworte
- Conference (30)
- Konferenz (29)
- Accident (25)
- Unfall (25)
- Deutschland (19)
- Germany (19)
- Fahrzeug (15)
- Vehicle (15)
- Injury (14)
- Verletzung (14)
Institut
Die Standsicherheit und Dauerhaftigkeit von Spannbetonbrücken werden wesentlich durch den Ist-Zustand der Bewehrung und der Spannglieder bestimmt. Bei komplexeren Schadensbildern oder dem Verdacht visuell nicht erkennbarer Schäden sind zur Zustandsbeurteilung detaillierte Informationen über deren Art und Umfang durch Objektbezogene Schadensanalysen zu erheben. Die Anzahl der dazu zu öffnenden Untersuchungsstellen kann durch den Einsatz zerstörungsfreier Prüfverfahren (ZfPBau-Verfahren) deutlich reduziert werden. Die Leistungsfähigkeit der automatisierten ZfPBau-Verfahren - Radar, Ultraschallecho und Impact-Echo - für die Ortung von Bewehrung, internen Spanngliedern und gegebenenfalls vorhandenen Verpressfehlern wird anhand von Messungen an der Fuldatalbrücke bei Eichenzell gezeigt. Die Ergebnisse der Untersuchungen werden bildgebend dargestellt.
An die Lichtsignalsteuerung richten sich hohe Qualitätsanforderungen, da ihr für einen sicheren und flüssigen Verkehrsablauf im Straßennetz eine wichtige Rolle zukommt. Um eine hohe Qualität der Lichtsignalsteuerung auch im wachsenden Altbestand von Anlagen zu gewährleisten, liegt es nahe, eine regelmäßige, systematische Überprüfung vorzunehmen, um Mängel frühzeitig erkennen und beheben zu können. Ziel des Forschungsvorhabens war es, eine aufwandsoptimierte Verfahrensweise und die notwendigen Hilfsmittel für ein systematisches Qualitätsmanagement für Lichtsignalanlagen (LSA) zu entwickeln. Hierzu wurde zunächst die Lichtsignalsteuerung als Gegenstand des Qualitätsmanagements eingehend erörtert. Auf dieser Grundlage wurden Verfahrensweisen und EDV-gestützte Hilfsmittel entwickelt, mit denen die Güte des Verkehrsablaufs und die Verkehrssicherheit im Straßennetz und an einzelnen Knotenpunkten mit geringem Aufwand überprüft werden kann. Zur Qualitätsbewertung werden Unfalldaten, Prozessdaten und Betriebsdaten analysiert sowie der Verkehrsablauf vor Ort beobachtet. Der Aufbau einer Wissensbasis diente dazu, den Kenntnisstand zu Möglichkeiten der Qualitätsverbesserung an Lichtsignalanlagen für die Anwendung verfügbar zu machen. Hierin sind typische Qualitätsmaengel an Lichtsignalanlagen mit Möglichkeiten der Abhilfe verknüpft. Ferner sind Prüfbedingungen der Eignung und Umsetzbarkeit der Maßnahmen hinterlegt. Mit Hilfe dieses Expertensystems können Maßnahmen identifiziert und bewertet werden. Die Anwendung des Verfahrens an verschiedenen Knotenpunkten zeigt, dass der systematische und modulare Aufbau gut geeignet ist, aussagekräftige Informationen zur Qualität der Lichtsignalsteuerung zu erlangen und geeignete Maßnahmen zur Qualitätsverbesserung zu identifizieren. Das Verfahren kann mit geringem Aufwand durchgeführt werden und kann daher einen Beitrag für die verbreitete Anwendung des Qualitätsmanagements für Lichtsignalanlagen leisten.
Die Verfahren des im Jahre 2001 eingeführten "Handbuchs für die Bemessung von Straßenverkehrsanlagen" (HBS) ermöglichen die verkehrstechnische Bemessung einzelner Straßenverkehrsanlagen zu überprüfen und die jeweils erzielbaren Qualitätsstufen des Verkehrsablaufs zu ermitteln. Die Forschungsgesellschaft für Straßen- und Verkehrswesen (FGSV) beabsichtigt, das HBS in den kommenden Jahren fortzuschreiben. Hierbei sollen neben neuen Forschungserkenntnissen auch Erfahrungen aus der Praxis berücksichtigt werden. Deshalb sind alle interessierten Anwender aufgerufen, über ihre Erfahrungen mit der Anwendung der Verfahren des HBS zu berichten. Mit dem vorliegenden Beitrag wird deshalb nicht nur der aktuelle Stand der Fortschreibung vorgestellt, sondern gleichermaßen werden alle Nutzer des HBS aufgefordert, Anregungen und ergänzende Hinweise aus ihrer praktischen Anwendung in die Fortschreibung des HBS einzubringen. Hierzu wurde ein Fragebogen entwickelt, der auf der Website der FGSV abrufbar ist.
Um ihre wichtige Verkehrsführungsfunktion vollständig erfüllen zu können, müssen Fahrbahnmarkierungen jederzeit eindeutig und unzweifelhaft erkennbar sein. Dies erfordert den flächendeckenden Einsatz von Typ II-Markierungen, weil nur sie auch bei Nacht und Nässe ausreichend erkennbar sind. Die in den Zusätzlichen Technischen Vertragsbedingungen und Richtlinien für Markierungsarbeiten im Straßenbau, Ausgabe 2002 (ZTV M 02) festgelegten verkehrstechnischen Eigenschaften für Typ II-Markierungen gelten für den Neu- und Gebrauchszustand. Sie stellen jedoch keine Beschaffenheits- oder Haltbarkeitsgarantie dar. Das bloße Unterschreiten eines Wertes beweist daher noch keinen Mangel. Nur wenn für die Wertunterschreitung ein Fehler ursächlich war, der der Markierung bereits zum Zeitpunkt der Abnahme irgendwie anhaftete, ist darin ein vom Auftragnehmer zu vertretener Mangel zu sehen. Normaler gebrauchsbedingter Verschleiß ist kein Mangel. Viele der vom Auftragnehmer zu vertretenden Fehler lassen sich nur bei oder unmittelbar nach der Applikation sicher feststellen. Die derzeit gängige Praxis, Markierungen erstmals wenige Tage vor Ablauf der Verjährungsfrist für Sachmangelansprüche zu begutachten beziehungsweise ausschließlich zu messen, sollte aufgegeben werden. Denn zu diesem Zeitpunkt lässt sich kaum noch feststellen, ob eine mögliche Wertunterschreitung vom Auftragnehmer zu vertreten ist oder nur normaler Verschleiß vorliegt. Es sollte verstärkt von den in den ZTV M 02 vorgesehenen Kontrollmechanismen bei der Applikation und an der fertigen Markierung durch fachkundiges Personal oder anerkannte Prüfstellen Gebrauch gemacht werden. Hierfür sollten Hinweise und Checklisten erstellt werden.
Als wichtiger Teil der Infrastruktur ist es Aufgabe der Straße, durch ein einheitlich gutes Qualitätsniveau die Mobilität zu sichern und damit die Voraussetzungen für wirtschaftliche Entwicklungsmöglichkeiten zu gewährleisten. Durch die ungünstige Verteilung der Altersstruktur, die kontinuierlich zunehmende Verkehrsbelastung, insbesondere des Schwerlastverkehrs, sowie knappe finanzielle Ressourcen kann diese Aufgabe jedoch nur noch durch eine systematische Straßenerhaltung und die netzweite Optimierung der Erhaltungsplanung erfüllt werden. Mit der Entwicklung und Einführung der Richtlinien für die Planung von Erhaltungsmaßnahmen an Straßenbefestigungen (RPE-Stra 01), der koordinierten Erhaltungsplanung (KEP) von Fahrbahn und Bauwerken sowie der regelmäßigen bundesweiten Zustandserfassung und -bewertung (ZEB) sind bereits wesentliche Voraussetzungen und Grundlagen hierfür geschaffen worden. Ein weiterer Schritt in Richtung Optimierung der Erhaltungsplanung ist die Entwicklung und Anwendung der Management Systeme PMS und BMS. Das für die Fahrbahnen entwickelte Pavement Management System (PMS) unterstützt einerseits bereits wesentlich die mittelfristige Erhaltungsplanung der Bundesländer und kann andererseits den Bedarf an Erhaltungsmitteln durch einen Vergleich verschiedener Szenarien abschätzen und sehr anschaulich verdeutlichen. Die kontinuierlich zunehmende Anzahl notwendiger Erhaltungsmaßnahmen erfordert künftig jedoch noch weitere Strategien, die insbesondere auf verkehrlich hoch belasteten Strecken die baustellenbedingten Verkehrsbehinderungen möglichst gering halten.
Der Bauwerksbestand in Bundesfernstraßen und gleichermaßen in Landes-, Staats- und Kommunalstraßen stammt zum überwiegenden Teil aus der Phase des Wiederaufbaus Deutschlands in den Jahren 1960-1980. Die Bauwerke haben somit ein durchschnittliches Alter von 30 bis 50 Jahren erreicht, was sich inzwischen an zunehmenden Schäden an den Bauwerken zeigt. Die ständige Beobachtung und Prüfung der Bauwerke erhält somit eine zentrale Bedeutung im Rahmen der Sicherheitsphilosophie des Ingenieurbaus und des Bauwerksmanagementsystems. Bauwerksprüfungen nach DIN 1076 sind daher in Zukunft ein wichtiger werdendes Aufgabenfeld, für das gut ausgebildetes und geschultes Personal vorhanden sein muss, um den sehr komplexen Bauwerksbestand richtig beurteilen zu können. Wegen des weiter voranschreitenden Personalabbaus bei den Verwaltungen, wird es dabei zunehmend notwendig werden auch Externe mit dieser verantwortungsvollen Aufgabe zu betrauen. Hierzu ist es Voraussetzung, dass auch diese Bauwerksprüfingenieure die notwendige Qualifikation und Erfahrung haben.
Immer wieder kommt es bei Arbeitsstellen kürzerer Dauer zu Auffahrunfällen auf die fahrbare Absperrtafel, häufig verursacht durch den Schwerverkehr. Unfallursachen sind oftmals Unachtsamkeit oder Übermüdung der Fahrer. Deshalb ist es erforderlich, geeignete Sicherungsmaßnahmen zu suchen, die sowohl einen flüssigen und sicheren Verkehrsablauf gewährleisten als auch das Risikopotenzial für die Arbeitskräfte durch Vermeidung von Unfällen deutlich verringern. Einen vielversprechenden Ansatz stellen die in den Niederlanden eingesetzten Warnschwellen dar, die 150 m vor der fahrbaren Absperrtafel verlegt werden, wodurch unachtsame Fahrer beim Überfahren mechanisch gewarnt werden. Deshalb wurde der Einsatz von Warnschwellen bei Arbeitsstellen kürzerer Dauer auf Bundesautobahnen im Rahmen von Pilotversuchen in Nordrhein-Westfalen und Rheinland-Pfalz praktisch erprobt. Auf Grund der gewonnenen Erkenntnisse wird uneingeschränkt bei allen stationären Arbeitsstellen kürzerer Dauer auf dem Seitenstreifen sowie auch für stationäre Arbeitsstellen kürzerer Dauer auf zweistreifigen Richtungsfahrbahnen mit Sperrung eines Fahrstreifens empfohlen, Warnschwellen einzusetzen.
Die Notwendigkeit der Erstellung eines neuen Regelwerks für Gesteinskörnungen, Schichten ohne Bindemittel, Asphalt, hydraulisch gebundene Tragschichten und Beton für Fahrbahndecken ergab sich aus der Umsetzung der Europäischen Normen (EN). Die seit dem 1. Juni 2004 gültigen EN für Gesteinskörnungen wurden durch die Technischen Lieferbedingungen für Gesteine im Straßenbau (TL Gestein-StB) in Deutschland anwendbar gemacht. Ausgehend von den TL Gestein-StB mussten für die verschiedenen Einsatzgebiete der Gesteinskörnungen die betroffenen Regelwerke überarbeitet werden. Hierbei wurden bestehende oder fast fertig gestellte EN berücksichtigt. Diese Überarbeitung basiert auf dem "zweiteiligen Regelwerk", das heißt Zusätzliche Technische Vertragsbedingungen (ZTV) und Technische Lieferbedingungen (TL), für den jeweiligen Produktbereich. Das Anforderungsniveau der Baustoffe und Baustoffgemische wurde gegenüber den bisherigen Festlegungen weitgehend beibehalten. Die bisherige Güteüberwachung wurde auf Grund der Vorgaben der mandatierten EN durch ein neues Qualitätsnachweisverfahren ersetzt. Unterstützt wird dieses neue Verfahren durch die freiwillige Güteüberwachung der Gesteinsproduzenten. Die neuen Regelungen werden in dieser 2-teiligen Veröffentlichung vorgestellt. Veränderungen und Zusammenhänge der Regelwerke werden anhand von Beispielen dargestellt. Die Auswirkungen der Neuerungen und die weitere Entwicklung der Regelwerke werden diskutiert.
The European Enhanced Vehicle-safety Committee wants to promote the use of more biofidelic child dummies and biomechanical based tolerance limits in regulatory and consumer testing. This study has investigated the feasibility and potential impact of Q-dummies and new injury criteria for child restraint system assessment in frontal impact. European accident statistics have been reviewed for all ECE-R44 CRS groups. For frontal impact, injury measures are recommended for the head, neck, chest and abdomen. Priority of body segment protection depends on the ECE-R44 group. The Q-dummy family is able to reflect these injuries, because of its biofidelity performance and measurement capabilities for these body segments. Currently, the Q0, Q1, Q1.5, Q3 and Q6 are available representing children of 0, 1, 1.5, 3 and 6 years old. These Q-dummies cover almost all dummy weight groups as defined in ECE-R44. Q10, representing a 10 year-old child, is under development. New child dummy injury criteria are under discussion in EEVC WG12. Therefore, the ECE-R44 criteria are assessed by comparing the existing P-dummies and new Q-dummies in ECE-R44 frontal impact sled tests. In total 300 tests covering 30 CRSs of almost all existing child seat categories are performed by 11 European organizations. From this benchmark study, it is concluded that the performance of the Q-dummy family is good with respect to repeatability of the measurement signals and the durability of the dummies. Applying ECE-R44 criteria, the first impression is that results for P- and Q-dummy are similar. For child seat evaluation the potential merits of the Q-dummy family lie in the extra measurement possibilities of these dummies and in the more biofidelic response.
The need for improved EU level accident information and data was identified in the EU White Paper on Transport Policy (2001)1 and detailed in the Road Safety Action Plan (2003)2. The plan specifies that the EC will develop a road safety observatory to coordinate data collection within an integrated framework.
This study is aimed to investigate the correlations of impact conditions and dynamic responses with the injuries and injury severity of child pedestrians by accident reconstruction. For this purpose, the pedestrian accident cases were selected from Sweden and Germany with detailed information about injuries, accident cars, and accident environment. The selected accident cases were reconstructed using mathematical models of pedestrian and passenger car. The pedestrian models were generated based on the height, weight, and age of the pedestrian involved in accidents. The car models were built up based on the corresponding accident car. The impact speeds in simulations were defined based on the reported data. The calculated physical quantities were analyzed to find the correlation with injury outcomes registered in the accident database. The reconstruction approaches are discussed in terms of data collection, estimating vehicle impact speeds, pedestrian moving speeds and initial posture, secondary ground impact, validity of the mathematical models, as well as impact biomechanics.
The data situation for quantifying the proportion of accidents avoided by the introduction of active safety systems is incomplete, since there is generally no data available on the accidents avoided by the technology in question. In this paper, a split-register approach is suggested and compared with the classical case-control approach known from epidemiologic applications. Provided a set of assumptions hold, which can reasonably be made in such data situations, the split register approach allows inferences on the population accident risk. For both approaches the benefits of basing the analysis on the results of a logistic regression to adjust for confounding factors are outlined. The biasing effects of violating key assumptions are discussed and the split-register approach is demonstrated using the example of the active safety system ESP with data from the German in-depth accident study GIDAS.
Active safety systems are aimed at accident prevention, hence the knowledge required for their development is different from that required for passive safety systems aimed at injury prevention. Particularly, knowledge about accident causation is required. When looking at existing accident causation data, it is argued it fails to explain in sufficient detail how and why the accidents occur. Therefore, there is a need for detailed micro-level descriptions of accident causation mechanisms, and also of methodologies suitable for creating such descriptions. One study addressing these needs is the Swedish project FICA (Factors Influencing the Causation of Accidents and Incidents), where an accident investigation methodology suitable for active safety is developed, and in-depth accident investigations following this methodology are carried out on-scene in the area of Gothenburg by a multidisciplinary team. A preliminary aggregated analysis of different cases shows that the methodology developed is adequate for pointing out common contributing factors and devising principal countermeasures.
Electronic Stability Program (ESP) aims to prevent the lateral instability of a vehicle. Linked to the braking and powertrain systems, it prevents the car from running wide on a corner or the rear from sliding out. It also helps the driver control his trajectory, without replacing him, in the case of loss of control where the driver is performing an emergency manoeuvrer (confused and exaggerated steering wheel actions). A new ESP function optimizes ESP action in curves with hard under steering (situations in which the front wheels lose grip and the vehicle slides towards the outside of the curve). A complementary feature prevents the wheels from spinning when pulling away and accelerating. The name given to the ESP system varies according to the vehicle manufacturer, but other terms include: active stability control (ASC), automotive stability management system (ASMS), dynamic stability control (DSC), vehicle dynamic control (VDC), vehicle stability control (VSC) or electronic stability Control (ESC). This paper proposes an evaluation of the effectiveness of ESP in terms of reduction of injur accidents in France. The method consists of 3 steps: - The identification, in the French National injury accident census (Gendarmerie Nationale only), of accident-involved cars for which the determination of whether or not the car was fitted with ESP is possible. A sample of 1 356 cars involved in injury accidents occurred in 2000, 2001, 2002 and 2003 was then selected. But we had to restrict the analysis to only 588 Renault Lagunas. - The identification of accident situations for which we can determine whether or not ESP is pertinent (for example ESP is pertinent for loss of control accidents whilst it is not for cars pulling out of a junction). - The calculation, via a logistic regression, of the relative risk of being involved in an ESPpertinent accident for ESP equipped cars versus unequipped cars, divided by the relative risk of being involved in a non ESP-pertinent accident for ESP equipped cars versus unequipped cars. This relative risk is assumed to be the best estimator of ESP effectiveness. The arguments for such a method, effectiveness indicator and implicit hypothesis are presented and discussed in the paper. Based on a few assumptions, ESP is proved to be highly effective. Currently, the relative risk of being involved in an ESP pertinent accident for ESP-equipped cars is lower (-44%, although not statistically significant)rnthan for other cars.rn
The so-called "seat-belt injuries" or "seat-belt syndromes", described as 2-point seat-belt injuries, contain heavy inflection injuries of the lumbal spinal column, combined with heavy abdominal injuries as rupture of the upper intestinal bold or heavy injuries of the upper entrails. With "playing" children in the font of the car, with inappropriate plant of 3-point belts, identical injuries can occur.
Rollover scenarios in Europe
(2005)
Rollover accidents seem to be a rising problem in Europe and therefore the systematic of this accident scenario should be investigated. Based on statistical investigations on major European accident databases for different countries a series of 73 real world rollover accidents was analysed. These cases were reconstructed using PC-Crash and preliminary categorised using a modified USbased rollover classification. In a first step, the rollover events were reconstructed from the point of conflict to the vehicle- rest position. The vehicles kinematics as well as its linear and rotational velocities were derived. In a second step typical velocity characteristics as well as kinematics were identified and the events categorised according to these criteria. Based on these results four main categories were defined, covering all reconstructed accidents. This categorisation was based on mechanical parameters (rotatory and translator kinematical data of the vehicle). Significant differences can be seen for different scenarios for the "first phase of rollover".
This paper describes the methodology of In-Depth Investigation in Germany on the example of GIDAS (German In-Depth Accident Study). Since 1999 in Germany a joint project between FAT (Forschungsvereinigung Automobiltechnik or Automotive Industry Research Association) and BASt (Bundesanstalt für Straßenwesen or the Federal Road Research Institute) is being carried out in Hannover and Dresden. The methodology of this project is based on a statistically orientated procedure of data sampling (sampling plan, weighting factors). The paper describes the possibilities of such in-depth investigation on the results of the offered title. The accident cases were collected randomly within GIDAS at Hannover. There are more cases existing from previous investigation started in 1985 under the same methodology. The portion of rollovers can be established at 3.7% of all accidents with casualties in the year 2000. For the study 434 cases of car accidents with rollovers are used for a detail comprehensive analysis. The accidents happened in the years 1994 to 2000 in the Hannover area. The injury distribution will report about 741 occupants with rollover accident event. The presented paper will give an overview of the accident situations following in rollover movements of cars. The distributions of injury frequencies, injury severity AIS for the whole body and for the body regions of occupants will be presented and compared to technical details like the impact speed and the deformation pattern. The speed of the car was determined at the point of rollover and on the point of accident initiency. The characteristics of the kinematics followed in a rollover movement are analyzed and the major defined types of rollover will be shown in the paper. The paper will describe the possibilities of In-Depth Investigation methods for the approach of finding countermeasures on the example of car accidents with rollover and explaining the biomechanics of injuries in rollover movements.
This paper set out to examine the possibilities for injury avoidance implications for older drivers in crashes, based on crash and injury patterns among older drivers and current trends in ageing in most western societies. A number of safety technologies were identified and discussed which have potential for improving vehicle older driver crash avoidance and crashworthiness. While there were some promising estimates available of the likely benefits of this technology for improving safety, it is evident that they need to be confirmed for older drivers, given their age-related disabilities and sensory limitations. Further research is urgently required to ensure that these technologies yield safety benefits without any disbenefits for older drivers.rn
Nowadays airbags are part of the standard equipment in almost all new cars. While airbags are saving an increasing number of people from severe injuries and death in moderate and high speed crashes, they do not completely prevent dashboard injuries. The most common mechanism in dashboard injuries is a posteriorly directed force to the proximal tibia with the knee flexed. This may occur during a motor vehicle frontal impact accident when a knee of the driver or the front-seat passenger strikes the dashboard. The posterior force can be combined with a abducting or rotational force leading to concomitant lateral or posterolateral injury. Car and airbag manufacturers therefore develop special inflatable systems to reduce the impact force in dashboard injuries. Every new inflatable system, however, has to be evaluated in out of position situations in which the system might cause injuries to certain body areas. Therefore, we investigated a new kneebag system in different critical seating positions of post mortem test subjects (PMTS). The tested knee airbag module is a folded airbag (18 litre volume) which is installed below the lower section of the instrument panel of a passenger car. Using four PMTS (2 male, 2 female, age 36"67) the following positions were tested: normal seating position, knee flexed >90 degrees and knee flexed <60 degrees in static deployment tests with direct contact. In addition a dynamic test (48.8kph, AAMA-pulse) was carried out with the PMTS belted in a normal seating position. The inflation phase and the impact of the system on the knee/lower leg were analysed by high speed videos. After the test the lower legs of the PMTS were examined by Xray and autopsy. All soft tissue injuries and bone fractures were recorded. All the tests could be evaluated. Except some superficial skin lesions in the impact area no fracture of the bones around the knee and no knee ligament and tendon injuries were observed. Neither video analysis nor autopsy of the PMTS showed any critical contact injuries caused by the inflation process of the bag. Therefore, it can be concluded that in the tested seating positions which are the most critical for the knee area the knee bag system is safe.
This paper reviews briefly the evolution of the investigation of transport accidents from the early beginnings when individual events were studied but systematic data was not collected. In the transport modes other than on the roads, accident investigation early on, even of single events, was important in introducing safety improvements. Road accidents, however, evolved enormously with the growth of car ownership without any comparable political response to the consequent deaths and injuries, equivalent to what happened with the other modes. From the 1950s data bases started to contribute to our knowledge of the epidemiology of road traffic injuries, and in-depth sample studies have contributed much to the body of knowledge in the last 30 years. However, even the basic input and output variables of a crash, its severity and the seriousness of the outcomes in terms of injuries and their consequences are not complete or agreed upon. Issues of experimental design and sampling are discussed. It is proposed that the most important area for current research to address is the effect of population variations on injury outcomes. The need for the establishment of good data bases for active safety issues is emphasised with the consequent need for better links between the research community and the police.