Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (427)
- Konferenzveröffentlichung (336)
- Bericht (23)
- Arbeitspapier (13)
Volltext vorhanden
- ja (799) (entfernen)
Schlagworte
- Germany (536)
- Deutschland (534)
- Forschungsbericht (387)
- Research report (387)
- Conference (306)
- Konferenz (302)
- Unfall (180)
- Accident (179)
- Safety (148)
- Sicherheit (145)
- Bewertung (142)
- Test (119)
- Versuch (113)
- Injury (101)
- Evaluation (assessment) (99)
- Verletzung (99)
- Statistics (84)
- Measurement (83)
- Statistik (82)
- Messung (81)
- Unfallrekonstruktion (79)
- Method (77)
- Verfahren (76)
- Analyse (math) (72)
- Analysis (math) (70)
- Driver (70)
- Prüfverfahren (70)
- Fahrer (68)
- Simulation (67)
- Verhalten (66)
- Behaviour (65)
- Test method (65)
- Berechnung (62)
- Fahrzeug (62)
- Calculation (61)
- Vehicle (61)
- Specifications (59)
- Richtlinien (58)
- Unfallverhütung (57)
- Fatality (55)
- Tödlicher Unfall (55)
- Datenerfassung (53)
- Schweregrad (Unfall, Verletzung) (53)
- Interview (52)
- Verbesserung (52)
- Improvement (51)
- Reconstruction (accid) (51)
- Severity (accid, injury) (51)
- Data acquisition (50)
- Datenbank (50)
- Car (46)
- Planung (46)
- Cause (45)
- Development (45)
- Leistungsfähigkeit (allg) (45)
- Planning (45)
- Ursache (45)
- Entwicklung (44)
- Risiko (44)
- Efficiency (43)
- Pedestrian (43)
- Prevention (43)
- Risk (43)
- Autobahn (42)
- Fußgänger (42)
- injury) (42)
- Bridge (41)
- Geschwindigkeit (41)
- Schweregrad (Unfall (41)
- Verletzung) (41)
- Evaluation (40)
- On the spot accident investigation (40)
- Speed (40)
- Accident prevention (39)
- Traffic (39)
- Untersuchung am Unfallort (39)
- Verkehr (39)
- Fahrzeugführung (38)
- Severity (accid (38)
- Brücke (37)
- Prognose (33)
- Driving (veh) (32)
- Rechenmodell (32)
- Bemessung (31)
- Collision (31)
- Data bank (31)
- Mathematical model (31)
- Tunnel (31)
- Zusammenstoß (31)
- Cyclist (30)
- Radfahrer (30)
- Forecast (29)
- Motorcyclist (29)
- Motorradfahrer (29)
- Accident reconstruction (28)
- Fahranfänger (28)
- Lorry (28)
- Pkw (28)
- Recently qualified driver (28)
- Skill (road user) (28)
- Europa (27)
- Europe (27)
- Passives Sicherheitssystem (27)
- Traffic flow (27)
- Verkehrssteuerung (27)
- Design (overall design) (26)
- Durability (26)
- Fahrerassistenzsystem (26)
- Highway (26)
- Impact study (26)
- Verminderung (26)
- Accident rate (25)
- Active safety system (25)
- Benutzung (25)
- Dauerhaftigkeit (25)
- Modification (25)
- Straße (25)
- Traffic control (25)
- Alte Leute (24)
- Anfahrversuch (24)
- Attitude (psychol) (24)
- Driving aptitude (24)
- Education (24)
- Emission (24)
- Old people (24)
- Unfallhäufigkeit (24)
- Use (24)
- Wirksamkeitsuntersuchung (24)
- Aktives Sicherheitssystem (23)
- Decrease (23)
- Digital model (23)
- Driver training (23)
- Erziehung (23)
- Fernverkehrsstraße (23)
- Insasse (23)
- Lkw (23)
- Modell (23)
- Numerisches Modell (23)
- Condition survey (22)
- Driver assistance system (22)
- Highway design (22)
- Knotenpunkt (22)
- Main road (22)
- Motorway (22)
- Risikobewertung (22)
- Road network (22)
- Sachschaden (22)
- Stadt (22)
- Straßennetz (22)
- Urban area (22)
- Veränderung (22)
- Zustandsbewertung (22)
- Ausrüstung (21)
- Damage (21)
- Einstellung (psychol) (21)
- Equipment (21)
- Fahrausbildung (21)
- Fahrgeschicklichkeit (21)
- Frontalzusammenstoß (21)
- Kind (21)
- PKW (21)
- Passive safety system (21)
- Straßenentwurf (21)
- Surfacing (21)
- Verkehrsfluss (21)
- Child (20)
- Cost (20)
- Head on collision (20)
- Information (20)
- Jugendlicher (20)
- Junction (20)
- Risk assessment (20)
- Vehicle occupant (20)
- Administration (19)
- Adolescent (19)
- Decke (Straße) (19)
- Deformation (19)
- Instandsetzung (19)
- Kosten (19)
- Motorrad (19)
- Quality assurance (19)
- Qualitätssicherung (19)
- Repair (19)
- Verformung (19)
- Verkehrsstärke (19)
- Bituminous mixture (18)
- Bituminöses Mischgut (18)
- Database (18)
- Freeway (18)
- Legislation (18)
- Motorcycle (18)
- Road construction (18)
- Straßenbau (18)
- Verkehrsinfrastruktur (18)
- Bearing capacity (17)
- Belastung (17)
- Kontrolle (17)
- Layout (17)
- Load (17)
- Maintenance (17)
- Metal bridge (17)
- Organisation (17)
- Tragfähigkeit (17)
- Unterhaltung (17)
- Verkehrserhebung (17)
- Verwaltung (17)
- Articulated vehicle (16)
- Error (16)
- Gelenkfahrzeug (16)
- Gesetzgebung (16)
- Gestaltung (16)
- Straßenverkehr (16)
- Surveillance (16)
- Temperatur (16)
- Temperature (16)
- Age (15)
- Alter (15)
- Baustelle (15)
- Bindemittel (15)
- Binder (15)
- Bitumen (15)
- Construction (15)
- Eigenschaft (15)
- Fehler (15)
- Grenzwert (15)
- Landstraße (15)
- Limit (15)
- Model (not math) (15)
- Norm (tech) (15)
- Oberfläche (15)
- Properties (15)
- Surface (15)
- Traffic count (15)
- Traffic lane (15)
- Verhütung (15)
- Cost benefit analysis (14)
- Festigkeit (14)
- Fire (14)
- Information documentation (14)
- Lebenszyklus (14)
- Organization (14)
- Pollutant (14)
- Rural road (14)
- Sicherheitsgurt (14)
- Software (14)
- Transport infrastructure (14)
- Airbag (13)
- Bau (13)
- Beton (13)
- Concrete (13)
- Construction site (13)
- Economic efficiency (13)
- Expert opinion (13)
- Fahrstreifen (13)
- Gutachten (13)
- Human factor (13)
- Impact test (veh) (13)
- Menschlicher Faktor (13)
- Quality (13)
- Qualität (13)
- Schutzhelm (13)
- Stahlbrücke (13)
- Strength (mater) (13)
- Technologie (13)
- Technology (13)
- Wirtschaftlichkeit (13)
- Auffahrunfall (12)
- Crash helmet (12)
- Erste Hilfe (12)
- Fahrzeugsitz (12)
- Head (12)
- Kapazität (Straße) (12)
- Kopf (12)
- Mobility (12)
- Mobilität (12)
- Rear end collision (12)
- Safety belt (12)
- Seitlicher Zusammenstoß (12)
- Spannbeton (12)
- Straßenverkehrsrecht (12)
- Traffic regulations (12)
- Water (12)
- Überschlagen (12)
- Aggregate (11)
- Air pollution (11)
- Cracking (11)
- Delivery vehicle (11)
- Detection (11)
- Drunkenness (11)
- Fahrleistung (11)
- Forschungsarbeit (11)
- Griffigkeit (11)
- Krankheit (11)
- Life cycle (11)
- Luftverunreinigung (11)
- Lärm (11)
- Medizinische Untersuchung (11)
- Orthotropic plate (11)
- Perception (11)
- Prestressed concrete (11)
- Rissbildung (11)
- Seat (veh) (11)
- Sensor (11)
- Side impact (11)
- Standardisierung (11)
- Telematik (11)
- Time (11)
- Trunkenheit (11)
- Vehicle mile (11)
- Wahrnehmung (11)
- Wasser (11)
- Weather (11)
- Wirtschaftlichkeitsrechnung (11)
- Witterung (11)
- Air bag (restraint system) (10)
- Austria (10)
- Automatisch (10)
- Betonstraße (Oberbau) (10)
- Bremsung (10)
- Chemical analysis (10)
- Chemische Analyse (10)
- Classification (10)
- Communication (10)
- Comprehension (10)
- Driving (10)
- Driving test (10)
- EU (10)
- Ermüdung (mater) (10)
- Experience (human) (10)
- Fahreignung (10)
- Fahrprüfung (10)
- Fahrsimulator (10)
- First aid (10)
- International (10)
- Japan (10)
- Klassifizierung (10)
- Laboratorium (10)
- Medical aspects (10)
- Medical examination (10)
- Medizinische Gesichtspunkte (10)
- Nitrogen oxide (10)
- Noise (10)
- Overturning (veh) (10)
- Personal (10)
- Personnel (10)
- Rigid pavement (10)
- Schadstoff (10)
- Skidding resistance (10)
- Specification (standard) (10)
- Standardization (10)
- Traffic concentration (10)
- Traffic density (10)
- Vereinigtes Königreich (10)
- Verkehrsqualität (10)
- Winter maintenance (10)
- Winterdienst (10)
- Zuschlagstoff (10)
- Österreich (10)
- Adaptation (psychol) (9)
- Anpassung (psychol) (9)
- Antikollisionssystem (9)
- Auftaumittel (9)
- Balken (9)
- Baustoff (9)
- Beam (9)
- Behinderter (9)
- Bewehrung (9)
- Biomechanics (9)
- Biomechanik (9)
- Braking (9)
- Brustkorb (9)
- Datenverarbeitung (9)
- Deicing (9)
- Dynamics (9)
- Dynamik (9)
- Erfahrung (menschl) (9)
- Fahrstabilität (9)
- Fahrtauglichkeit (9)
- Fatigue (mater) (9)
- Feinstaub (9)
- Führerschein (9)
- Illness (9)
- Kommunikation (9)
- Krankenhaus (9)
- Leg (human) (9)
- Level of service (9)
- Lichtsignal (9)
- Nachhaltige Entwicklung (9)
- Oberflächentextur (9)
- Occupation (9)
- Ort (Position) (9)
- Policy (9)
- Politik (9)
- Psychological aspects (9)
- Psychologie (9)
- Psychologische Gesichtspunkte (9)
- Psychology (9)
- Reinforcement (in mater) (9)
- Simulator (driving) (9)
- Stickoxid (9)
- Sustainability (9)
- Telematics (9)
- Traffic signal (9)
- USA (9)
- Vehicle handling (9)
- Zeit (9)
- Abbiegen (8)
- Before and after study (8)
- Berufsausübung (8)
- Bicycle (8)
- Blood alcohol content (8)
- Blutalkoholgehalt (8)
- Boden (8)
- Brand (8)
- Bremse (8)
- Bus (8)
- Capacity (road, footway) (8)
- Carriageway marking (8)
- Data processing (8)
- Digitale Bildverarbeitung (8)
- Driver information (8)
- Droge (8)
- Drugs (8)
- Fahrbahnmarkierung (8)
- Fahrrad (8)
- Finite element method (8)
- Flexible pavement (8)
- Gemeindeverwaltung (8)
- Geschichte (8)
- Gesetzesübertretung (8)
- Government (national) (8)
- Highway traffic (8)
- History (8)
- Hospital (8)
- Immission (8)
- Laboratory (not an organization) (8)
- Leistungsfähigkeit (Fahrer) (8)
- Local authority (8)
- Location (8)
- Material (constr) (8)
- Particulate matter (8)
- Probability (8)
- Reaction (human) (8)
- Reaktionsverhalten (8)
- Road traffic (8)
- Schutzeinrichtung (8)
- Soil (8)
- Traffic engineering (8)
- Unfallschwerpunkt (8)
- United Kingdom (8)
- Verkehrsablauf (8)
- Verkehrsteilnehmer (8)
- Vorher Nachher Untersuchung (8)
- Wahrscheinlichkeit (8)
- Accident black spot (7)
- Accompanied driving (7)
- Audit (7)
- Aufmerksamkeit (7)
- Bauwerk (7)
- Begleitetes Fahren (7)
- Beinahe Unfall (7)
- Blood (7)
- Blut (7)
- Brake (7)
- Collision avoidance system (7)
- Compliance (specif) (7)
- Concentration (chem) (7)
- Continuous (7)
- Decision process (7)
- Einbau (7)
- Eins (7)
- Electronic stability program (7)
- Engineering structure (7)
- Entdeckung (7)
- Entscheidungsprozess (7)
- Environment (7)
- Fahrbahn (7)
- Fahrerinformation (7)
- Feuer (7)
- Fracture (bone) (7)
- Front (7)
- Führerschein Punktesystem (7)
- Image processing (7)
- Intelligentes Transportsystem (7)
- Interior (veh) (7)
- Knochenbruch (7)
- Kontinuierlich (7)
- Konzentration (chem) (7)
- Laying (7)
- Lieferfahrzeug (7)
- Near miss (7)
- Offence (7)
- Offender (7)
- One (7)
- Orthotrope Fahrbahntafel (7)
- Point demerit system (7)
- Pollution concentration (7)
- Publicity (7)
- Rechtsübertreter (7)
- Rehabilitation (7)
- Reinforced concrete (7)
- Reinforcement (gen) (7)
- Road user (7)
- Sample (mater) (7)
- School (7)
- Schule (7)
- Stability (7)
- Standfestigkeit (7)
- Surface texture (7)
- Thorax (7)
- Vehicle regulations (7)
- Verständnis (7)
- Verstärkung (allg) (7)
- Sichtbarkeit (7)
- Werbung (7)
- Wirbelsäule (7)
- Activity report (6)
- Annual average daily traffic (6)
- Asphaltstraße (Oberbau) (6)
- Attention (6)
- Auftrag (6)
- Augenbewegungen (6)
- Automatic (6)
- Bein (menschl) (6)
- Betriebshof (6)
- Bridge deck (6)
- Bruch (mech) (6)
- Case study (6)
- Cervical vertebrae (6)
- China (6)
- Coefficient of friction (6)
- Composite bridge (6)
- Contact (tyre road) (6)
- Contract (6)
- Cycle track (6)
- Disabled person (6)
- Distraction (6)
- Durchlässigkeit (6)
- Eindringung (6)
- Elektronisches Stabilitätsprogramm (6)
- Emergency (6)
- Eye movement (6)
- Fahrbahntafel (6)
- Fahrzeuginnenraum (6)
- Fallstudie (6)
- Fiber reinforced concrete (6)
- France (6)
- Frankreich (6)
- Frau (6)
- Frequency (6)
- Gas (6)
- Gesundheit (6)
- Güterverkehr (6)
- Halswirbel (6)
- Health (6)
- Impact test (6)
- India (6)
- Indien (6)
- Information management (6)
- Intelligent transport system (6)
- JDTV (6)
- Kunststoff (6)
- Manufacture (6)
- Notfall (6)
- Penetration (6)
- Permeability (6)
- Portugal (6)
- Psychological examination (6)
- Psychologische Untersuchung (6)
- Querschnitt (6)
- Radweg (6)
- Recycling (6)
- Rehabilitation (road user) (6)
- Reibungsbeiwert (6)
- Research project (6)
- Rückfalltäter (6)
- Safety fence (6)
- Sound (6)
- Spreading (6)
- Stahl (6)
- Stahlbeton (6)
- Steel (6)
- Steifigkeit (6)
- Stiffness (6)
- Stress (6)
- Stress (psychol) (6)
- Tätigkeitsbericht (6)
- Umwelt (6)
- Vegetation (6)
- Verbundbrücke (6)
- Vorschrifteneinhaltung (6)
- Wearing course (6)
- Welding (6)
- Winkel (6)
- Ablenkung (psychol) (5)
- Accessibility (5)
- Akzeptanz (5)
- Analyse (Math) (5)
- Angle (5)
- Apparatus (measuring) (5)
- Asphaltoberbau (5)
- Aufbereitungsanlage (5)
- Ballungsgebiet (5)
- Beschichtung (5)
- Betriebsverhalten (5)
- Bottleneck (5)
- Brückenbelag (5)
- Case law (5)
- Coach (5)
- Coating (5)
- Compaction (5)
- Conurbation (5)
- Correlation (math, stat) (5)
- Cross section (5)
- Deckschicht (5)
- Defect (tech) (5)
- Depot (transp) (5)
- Depth (5)
- Detektion (5)
- Ebenheit (5)
- Ecobalance (5)
- Einfahrt (5)
- Elektrofahrzeug (5)
- Emission control (5)
- Emissionskontrolle (5)
- Empfindlichkeit (5)
- Engpass (5)
- Ergonomics (5)
- Ergonomie (5)
- Exhaust aftertreatment (5)
- Fahrtüchtigkeit (5)
- Fahrzeugrückhaltesystem (5)
- Failure (5)
- Financing (5)
- Finanzierung (5)
- Fleet of vehicles (5)
- Geschwindigkeitsbeschränkung (5)
- Heat (5)
- Herstellung (5)
- In service behavior (5)
- In situ (5)
- Installation (5)
- Koordinierte Signalsteuerung (5)
- Length (5)
- Life-cycle (5)
- Linked signals (5)
- Merging traffic (5)
- Messgerät (5)
- Methode der finiten Elemente (5)
- Mixing plant (5)
- Model (non math) (5)
- Moisture content (5)
- Nutzwertanalyse (5)
- Optimum (5)
- Overtaking (5)
- Pavement (5)
- Plastic material (5)
- Platte (5)
- Pollution (5)
- Post crash (5)
- Rechtsprechung (5)
- Recidivist (5)
- Recycling (mater) (5)
- Regression analysis (5)
- Regressionsanalyse (5)
- Reisebus (5)
- Retraining of drivers (5)
- Rural highway (5)
- Sample (stat) (5)
- Schall (5)
- Schutz (5)
- Schweissen (5)
- Schwingung (5)
- Seite (5)
- Sensitivity (5)
- Service area (5)
- Shear (5)
- Sichtbarkeit (5)
- Slab (5)
- Specification (Standard) (5)
- Speed limit (5)
- Spinal column (5)
- Spurrinne (5)
- Stichprobe (5)
- Straßenseitenfläche (5)
- Straßenverkehrstechnik (5)
- Technische Vorschriften (Kraftfahrzeug) (5)
- Tiefe (5)
- Traffic congestion (5)
- Tragschicht (5)
- Tunnel lining (5)
- Tunnelauskleidung (5)
- Value analysis (5)
- Vehicle restraint system (5)
- Verarbeitbarkeit (5)
- Verdichtung (5)
- Verkehrsstauung (5)
- Verkehrsuntersuchung (5)
- Verkehrsverflechtung (5)
- Verschiebung (5)
- Verteilung (mater) (5)
- Vibration (5)
- Viscosity (5)
- Viskosität (5)
- Vorn (5)
- Wassergehalt (5)
- Weight (5)
- Wet road (5)
- Woman (5)
- Workability (5)
- Wärme (5)
- Ökobilanz (5)
- Überholen (5)
- Abdichtung (4)
- Absorption (4)
- Adhesion (4)
- Adhäsion (4)
- Alcohol test (4)
- Alkoholtest (4)
- Anthropometric dummy (4)
- Arbeitsbedingungen (4)
- Arbeitsgruppe (4)
- Arzneimittel (4)
- Ausführungsfehler (4)
- Auswahl (4)
- Bepflanzung (4)
- Beschilderung (4)
- Bevölkerung (4)
- Black ice (4)
- Blech (4)
- Breite (4)
- Bridge surfacing (4)
- CEN (4)
- Carbon dioxide (4)
- Carriageway (4)
- Collision test (veh) (4)
- Control (4)
- Cycling (4)
- Damping (4)
- Datenübertragung (telekom) (4)
- Design (Overall design) (4)
- Driving licence (4)
- Druck (4)
- Dränasphalt (4)
- Dämpfung (4)
- EU directive (4)
- Eingabedaten (4)
- Electric vehicle (4)
- Electronics (4)
- Elektronik (4)
- Entrance (4)
- Estimation (4)
- Experimental road (4)
- Expert system (4)
- Expertensystem (4)
- Fahrdatenschreiber (4)
- Fahrernachschulung (4)
- Fahrzeugteil (Sicherheit) (4)
- Faserbewehrter Beton (4)
- Fatigue (human) (4)
- Frequenz (4)
- Fuel consumption (4)
- Full depth asphalt pavement (4)
- Genauigkeit (4)
- Gesetzesdurchführung (4)
- Glatteis (4)
- Goods traffic (4)
- Haftung (jur) (4)
- Hard shoulder (4)
- Human body (4)
- Incident detection (4)
- Incident management (4)
- Innenstadt (4)
- Input data (4)
- Interchange (4)
- Itinerary (4)
- Jahr (4)
- Kleintransporter (4)
- Korrelation (math, stat) (4)
- LKW (4)
- Layer (4)
- Liability (4)
- Länge (4)
- Man (4)
- Mann (4)
- Medication (4)
- Membrane (4)
- Menschlicher Körper (4)
- Metallbrücke (4)
- Minimum (4)
- Mix design (4)
- Montage (4)
- Movement (4)
- Müdigkeit (4)
- Nanotechnologie (4)
- Nanotechnology (4)
- Nasse Straße (4)
- Oberbau (4)
- Occupant (veh) (4)
- Orthotrope Platte (4)
- Oxid (4)
- Oxide (4)
- Personality (4)
- Persönlichkeit (4)
- Porosity (4)
- Porous asphalt (4)
- Pressure (4)
- Probe (4)
- Provisorisch (4)
- Public transport (4)
- Quer (4)
- Radfahren (4)
- Rechenprogramm (4)
- Regierung (Staat) (4)
- Reifen (4)
- Reinigung (4)
- Reiseweg (4)
- Risk taking (4)
- Road (4)
- Roadbase (4)
- Roadside (4)
- Schicht (4)
- Schrägseilbrücke (4)
- Schweden (4)
- Schweiz (4)
- Seitenstreifen (befestigt) (4)
- Selection (4)
- Sheet (metal) (4)
- Shock (4)
- Signalization (4)
- Spalling (4)
- Spannung (mater) (4)
- Stadtplanung (4)
- Stayed girder bridge (4)
- Stress (in material) (4)
- Störfallmanagement (4)
- Switzerland (4)
- Systemanalyse (4)
- Systems analysis (4)
- Tank Rast Anlage (4)
- Telephone (4)
- Temporary (4)
- Theorie (4)
- Theory (4)
- Titan (4)
- Titanium (4)
- Town centre (4)
- Town planning (4)
- Traffic survey (4)
- Transverse (4)
- Turn (4)
- Tyre (4)
- Umweltschutz (4)
- Unfallfolgemaßnahme (4)
- Variable message sign (4)
- Vehicle actuated (4)
- Verbot (4)
- Verkehrsabhängig (4)
- Warnung (4)
- Waterproofing (4)
- Wear (4)
- Wechselverkehrszeichen (4)
- Width (4)
- Working conditions (4)
- Working group (4)
- Year (4)
- Zusammensetzung (4)
- Öffentlicher Verkehr (4)
- Abgasnachbehandlung (3)
- Abkommen von der Fahrbahn (Unfall) (3)
- Abplatzen (3)
- Acceleration (3)
- Accident proneness (3)
- Addiction (3)
- Adult (3)
- Advanced driver assistance system (3)
- Ageing (3)
- Alcali silica reaction (3)
- Alignment (3)
- Alkali-Zuschlag-Reaktion (3)
- Alternative (3)
- Alternative energy (3)
- Animal (3)
- Anpassung (allg) (3)
- Anschlussstelle (3)
- Antrieb (tech) (3)
- Arterial highway (3)
- Audiovisual (3)
- Audiovisuell (3)
- Ausschreibung (3)
- Australia (3)
- Australien (3)
- Automation (3)
- Außerortsstraße (3)
- Bauweise (3)
- Befreiung (Bergung) (3)
- Beschleunigung (3)
- Blickfeld (3)
- Cable (3)
- Camera (3)
- Cement (3)
- Chlorid (3)
- Cleaning (3)
- Corrosion (3)
- Crash test (3)
- Czech Republic (3)
- Data collection (3)
- Data exchange (3)
- Data transmission (telecom) (3)
- Datenaustausch (3)
- Deflection (3)
- Diesel engine (3)
- Diffusion (3)
- Distribution (gen) (3)
- Dreidimensional (3)
- Driving instructor (3)
- Driving license (3)
- Durchbiegung (3)
- EU-Richtlinie (3)
- Effectiveness (3)
- Elektronische Fahrhilfe (3)
- Emulsion (3)
- Energy (3)
- Enforcement (law) (3)
- Environmental protection (3)
- Erwachsener (3)
- European Union (3)
- Evakuierung (3)
- Evenness (3)
- Event data recorder (road vehicle) (3)
- Extrication (3)
- Fahrerweiterbildung (3)
- Fahrlehrer (3)
- Fahrzeugabstand (3)
- Fahrzeugteile (3)
- Festzeitsteuerung (Lichtsignal) (3)
- Field of vision (3)
- Fixed time (signals) (3)
- Folie (3)
- Frost (3)
- Frost Tau Wechsel (3)
- Fuhrpark (3)
- Gefahr (3)
- Gegenverkehr (3)
- Group analysis (test) (3)
- Gussasphalt (3)
- Hazard (3)
- Head restraint (3)
- High performance concrete (3)
- Highway capacity (3)
- Hohlraumgehalt (3)
- Impact sled (3)
- In Bewegung (3)
- Intersection (3)
- Inventar (3)
- Inventory (3)
- Journey to school (3)
- Kamera (3)
- Kleidung (3)
- Kohlendioxid (3)
- Kohlenmonoxid (3)
- Kontakt Reifen Straße (3)
- Kopfstütze (3)
- Korea (Süd) (Demokratische Republik) (3)
- Korngestuftes Mineralgemisch (3)
- Korrosion (3)
- Kosten Nutzen Vergleich (3)
- Kraftstoffverbrauch (3)
- Kreisverkehrsplatz (3)
- Langfristig (3)
- Lenken (Fahrzeug) (3)
- Linienführung (3)
- Links (3)
- Long term (3)
- Longitudinal (3)
- Longitudinal profile (3)
- Längsprofil (3)
- Lärmschutzwand (3)
- Market (3)
- Markt (3)
- Meeting traffic (3)
- Methode der finite Elemente (3)
- Mittelwert (3)
- Mobility management (3)
- Mobilitätsmanagement (3)
- Mobiltelefon (3)
- Motor (3)
- Moving (3)
- Nacht (3)
- Netherlands (3)
- Niederlande (3)
- Night (3)
- Noise barrier (3)
- Non destructive (3)
- On the left (3)
- Overlapping (3)
- Parking pricing (3)
- Parkraumbewirtschaftung (3)
- Partnerschaft (3)
- Partnership (3)
- Passenger (3)
- Passive restraint system (3)
- Pavement Management System (3)
- Polymer (3)
- Population (3)
- Prestressing (3)
- Prohibition (3)
- Propulsion (3)
- Prototyp (3)
- Prototype (3)
- Public private partnership (3)
- Public relations (3)
- Qualitätsmanagementsystem (3)
- Querprofil (3)
- Rail traffic (3)
- Recording (3)
- Reisedauer (3)
- Reproducibility (3)
- Reproduzierbarkeit (3)
- Republic of Korea (3)
- Rheologie (3)
- Rheology (3)
- Ringanalyse (3)
- Roundabout (3)
- Route guidance (3)
- Run off the road (accid) (3)
- Rutting (3)
- Rücksichtslosigkeit (3)
- Schallpegel (3)
- Scheren (3)
- Schienenverkehr (3)
- Schulweg (3)
- Shotcrete (3)
- Side (3)
- Sound level (3)
- Spaltzugfestigkeitsversuch (3)
- Spannglied (3)
- Splitting tensile test (3)
- Stand der Technik (Bericht) (3)
- Standard test run (3)
- State of the art report (3)
- Steering (process) (3)
- Steife (Brücke) (3)
- Stiffener (Bridge) (3)
- Straßenbahn (3)
- Süchtigkeit (3)
- Tag (24 Stunden) (3)
- Telefon (3)
- Tendon (3)
- Tension (3)
- Texture (3)
- Three dimensional (3)
- Tier (3)
- Toxicity (3)
- Toxizität (3)
- Traffic assignment (3)
- Traffic restraint (3)
- Traffic signal control systems (3)
- Tram (3)
- Transport operator (3)
- Transportunternehmen (3)
- Transverse profile (3)
- Trend (stat) (3)
- Tschechische Republik (3)
- Turning (3)
- Umgehungsstraße (3)
- Umweltverträglichkeitsprüfung (3)
- Unfallneigung (3)
- United kingdom (3)
- Vehicle safety device (3)
- Vehicle spacing (3)
- Verkehrstechnik (3)
- Versuchspuppe (3)
- Versuchsstrecke (3)
- Verteilung (allg) (3)
- Visual display (3)
- Vorspannung (3)
- Warning (3)
- Windschutzscheibe (3)
- Wirkungsanalyse (3)
- Wissen (3)
- Zeitreihe (stat) (3)
- Zement (3)
- Zerstörungsfrei (3)
- Zielführungssystem (3)
- Zug (mech) (3)
- Zugänglichkeit (3)
- Öffentlichkeitsarbeit (3)
- Überlappung (3)
- Abdomen (2)
- Abnutzung (2)
- Abrieb (2)
- Accident severity (2)
- Accuracy (2)
- Achslast (2)
- Advanced vehicle control system (2)
- Aggression (psychol) (2)
- Air (2)
- Aircraft (2)
- Akustisches Signal (2)
- Alcohol (2)
- Alkohol (2)
- Alternativ (2)
- Alterung (mater) (2)
- Anti locking device (2)
- Approximation (2)
- Asphalt (2)
- Aufprallschlitten (2)
- Aufzeichnung (2)
- Ausdehnung (mater) (2)
- Auslaugung (2)
- Ausländer (2)
- Automatische Notbremsung (2)
- Automobile (2)
- Automobiles (2)
- Autonomous emergency braking (2)
- Average (2)
- Axle load (2)
- Barrierefrei (2)
- Baumusterzulassung (2)
- Bein (2)
- Bestrafung (2)
- Betriebsablauf (Transport) (2)
- Betriebskosten (2)
- Blutkreislauf (2)
- Bodenmechanik (2)
- Body (car) (2)
- Bremsweg (2)
- Brückenüberbau (2)
- Budget (2)
- Bypass (2)
- Calibration (2)
- Cantilever (2)
- Capacity (Road, footway) (2)
- Capacity (traffic network) (2)
- Car park (2)
- Car sharing (2)
- Carbon monoxide (2)
- Carbonate (2)
- Catalytic converter (2)
- Chloride (2)
- Chromatographie (2)
- Chromatography (2)
- Circulation (blood) (2)
- Clothing (2)
- Combustion (2)
- Compatibility (2)
- Competition (2)
- Components of the car (2)
- Components of the vehicle (2)
- Compression (2)
- Construction management (2)
- Construction method (2)
- Continuously graded aggregate (2)
- Crash victim (2)
- Crossing the road (2)
- Culvert (2)
- Cut and cover (2)
- Dauer (Zeit) (2)
- Day (24 hour period) (2)
- Decke (straße) (2)
- Deformable barrier (impact test) (2)
- Demand (econ) (2)
- Deterioration (2)
- Deutschalnd (2)
- Dicke (2)
- Dieselmotor (2)
- Digital computer (2)
- Digital image processing (2)
- Digital map (2)
- Digitale Karte (2)
- Digitalrechner (2)
- Disablement (2)
- Dispersion (stat) (2)
- Drainage (2)
- Driver experience (2)
- Driver license (2)
- Ductility (2)
- Duktilität (2)
- Durchlass (2)
- Dust (2)
- Economics (2)
- Ecosystem (2)
- Edge (2)
- Einsatzfahrzeug (2)
- Elastizitätsmodul (2)
- Electric bicycle (2)
- Electricity (2)
- Electronic driving aid (2)
- Elektrizität (2)
- Elektrofahrrad (2)
- Emergency vehicle (2)
- Energie (2)
- Entwässerung (2)
- Environment protection (2)
- Environmental impact analysis (2)
- Eu (2)
- Evacuation (2)
- Eveness (2)
- Expansion (2)
- Extern (2)
- Fahrassistenzsystem (2)
- Fahrbahnüberquerung (2)
- Fahrererfahrung (2)
- Fahrzeugflotte (2)
- Fahrzeugortung (2)
- Fahrzyklus (2)
- Faserbeton (2)
- Finland (2)
- Finnland (2)
- Foreigner (2)
- Form (2)
- Forschungsinstitut (2)
- Fracht (2)
- Freezing thawing cycle (2)
- Freight (2)
- Freight traffic (2)
- Freight transportation (2)
- Frost damage (2)
- Frostschaden (2)
- Fuel (2)
- Fuge (2)
- Full scale (2)
- Geländefahrzeug (2)
- Gemisch (2)
- Geographical information system (2)
- Geographisches Informationssystem (2)
- Georadar (2)
- Geotextil (2)
- Geotextile (2)
- Geschwindigkeitsminderung (bauliche Elemente) (2)
- Gewicht (2)
- Glue (2)
- Gravel (2)
- Gravity (2)
- Ground penetrating radar (2)
- Ground water (2)
- Grundwasser (2)
- Gütertransport (2)
- Halide (2)
- Harmonisation (2)
- Heavy (2)
- Hinten (2)
- Hochfester Beton (2)
- Human machine interface (2)
- Hybrid vehicle (2)
- Hybridfahrzeug (2)
- Hydrocarbon (2)
- Häufigkeit (2)
- Improvements (2)
- In service behaviour (2)
- Industrie (2)
- Industry (2)
- Information display systems (2)
- Insurance (2)
- Inter urban (2)
- Interactive model (2)
- Interaktives Modell (2)
- Intercity (2)
- Intermodal terminals (2)
- International road (2)
- Internationale Straße (2)
- Internet (2)
- Interoperability (2)
- Interoperabilität (2)
- Investition (2)
- Investment (2)
- Italien (2)
- Italy (2)
- Joint (structural) (2)
- Journey time (2)
- Kapazität (Verkehrsnetz) (2)
- Karbonatisierung (2)
- Karosserie (2)
- Kies (2)
- Klebstoff (2)
- Knee (human) (2)
- Knie (menschl) (2)
- Kohlenwasserstoff (2)
- Kompatibilität (2)
- Kontakt Reifen-Straße (2)
- Korn (2)
- Kraftstoff (2)
- Kragarm (2)
- Kreuzung (2)
- Laboratory (2)
- Leaching (2)
- Lebensdauer (2)
- Longer and heavier vehicle (2)
- Loss (2)
- Luft (2)
- Luftfahrzeug (2)
- Längs (2)
- Lüftung (2)
- Management (2)
- Marketing (2)
- Masse (2)
- Massenunfall (2)
- Materialveränderung (allg) (2)
- Matrix (2)
- Mensch Maschine Schnittstelle (2)
- Micro (2)
- Mikro (2)
- Mixture (2)
- Mobile phone (2)
- Mobilitätserhebung (2)
- Modulus of elasticity (2)
- Motivation (2)
- Nachfrage (2)
- Naturschutz (2)
- Network (traffic) (2)
- Non destructive testing (2)
- Normalgröße (2)
- Nummer (2)
- Näherung (math) (2)
- Offene Bauweise (2)
- Official approval (2)
- Operating costs (2)
- Optische Anzeige (2)
- Organisch (2)
- Organization (Association) (2)
- Organization (association) (2)
- Output (2)
- Outside (2)
- Parken (2)
- Parkfläche (2)
- Parking (2)
- Particle (2)
- Passenger transport (2)
- Penalty (2)
- Personenbeförderung (2)
- Personenschaden (2)
- Plasticity (2)
- Plastizität (2)
- Plate bearing test (2)
- Plattendruckversuch (2)
- Police (2)
- Polizei (2)
- Portable (2)
- Posture (2)
- Printed publicity (2)
- Privatisierung (2)
- Probekörper (2)
- Procurement (2)
- Prüfstand (2)
- Public participation (2)
- Pylon (2)
- Pädagogik (2)
- Quality management system (2)
- Radar (2)
- Radio (2)
- Rear (2)
- Rechts (2)
- Regierung (staat) (2)
- Region (2)
- Reifenprofil (2)
- Report (2)
- Residual (2)
- Responsibility (2)
- Rest (2)
- Restraint system (2)
- Rolled asphalt (2)
- Rumble strip (2)
- Rundfunk (2)
- Rutting (wheel) (2)
- Safety coefficient (2)
- Salt (chem) (2)
- Salz (chem) (2)
- Schlag (2)
- Schleudertrauma (2)
- Schriftwerbung (2)
- Schub (2)
- Schwer (2)
- Schwerkraft (2)
- Schwinden (2)
- Security (2)
- Sehvermögen (2)
- Seil (2)
- Seminar (2)
- Severity (acid (2)
- Shrinkage (2)
- Sicherheitsbeiwert (2)
- Sichtweite (2)
- Significance (2)
- Signifikanz (2)
- Soil mechanics (2)
- Solution (chem) (2)
- Spain (2)
- Spanien (2)
- Spannungsanalyse (2)
- Speeding (2)
- Sport utility vehicle (2)
- Staat (Regierung) (2)
- Stability (Mechanics) (2)
- Standardabweichung (2)
- Stated preference (2)
- Statics (2)
- Statik (2)
- Staub (2)
- Steuerung (2)
- Stochastic process (2)
- Stochastischer Prozess (2)
- Stress analysis (2)
- Störfallentdeckung (2)
- Subsoil (2)
- Superstructure (bridge) (2)
- Sweden (2)
- Telecommunication (2)
- Telekommunikation (2)
- Temperature measurement (2)
- Temperaturmessung (2)
- Test Method (2)
- Test procedures (2)
- Thickness (2)
- Torkretbeton (2)
- Traction control (2)
- Traffic Flow (2)
- Traffic counts (2)
- Tragbar (2)
- Trapezförmiger Träger (2)
- Trapezoidal beam (2)
- Triaxial (2)
- Tunnels (2)
- Two (2)
- Tyre tread (2)
- Ultimate load design (2)
- Underride prevention (2)
- Unfallopfer (2)
- United States (2)
- Unterfahrschutz (2)
- Untergrund (2)
- Unterleib (2)
- Urban development (2)
- Variance analysis (2)
- Varianzanalyse (2)
- Vehicles (2)
- Ventilation (2)
- Verantwortung (2)
- Verbrennung (2)
- Verkehrsbeschränkung (2)
- Verkehrsnetz (2)
- Verkehrszusammensetzung (2)
- Versicherung (2)
- Visibility distance (2)
- Vision (2)
- Visualisation (2)
- Visualisierung (2)
- Vorne (2)
- Warning systems (2)
- Wave (2)
- Wegewahl (2)
- Welle (2)
- Wettbewerb (2)
- Whiplash injury (2)
- Winter (2)
- Wirtschaft (2)
- Zerstörungsfreie Prüfung (2)
- Zusammendrückung (2)
- Zwei (2)
- Öffentlich Private Partnerschaft (2)
- Öffentliche Beteiligung (2)
- Ökosystem (2)
- AADT (1)
- Abblättern (1)
- Abfallbewirtschaftung (1)
- Abgaben (1)
- Ability (road user) (1)
- Abkommen von der Fahrbahn (1)
- Ablagerung (1)
- Ablenkung (1)
- Ablösung (Bindemittel) (1)
- Abstandsregeltempomat (1)
- Acceptability (1)
- Access road (1)
- Accident data (1)
- Accident prone location (1)
- Achse (math) (1)
- Active safety system; Automatic; Brake; Car; Collision avoidance system; Conference; Driver assistance system; Germany; Impact test (veh); Rear end collision; Severity (accid (1)
- Adaptive cruise control (1)
- Adaptive cruise controll (1)
- Admixture (1)
- Aerodynamics (1)
- Aerodynamik (1)
- Aesthetics (1)
- Aethanol (1)
- Aggression (psycho) (1)
- Aggressiveness (psychol) (1)
- Air traffic control (1)
- Airbag (restraint system) (1)
- Akustik (1)
- Alcolock (1)
- Alertness (1)
- Alkali Zuschlag Reaktion (1)
- Alkali silica reaction (1)
- Alternative Energie (1)
- Alterung (1)
- Analyse (1)
- Analyses (math) (1)
- Anchorage (1)
- Angles (1)
- Angularity (1)
- Ankündigung (1)
- Annual report (1)
- Anordnung (1)
- Anthropometrie (1)
- Anthropometry (1)
- Antiblockiereinrichtung (1)
- Antiblockiereinrichtung; Bewertung (1)
- Aptitude (1)
- Arbeitsplatz (1)
- Arch bridge (1)
- Area traffic control (1)
- Arm (human) (1)
- Arm (menschl) (1)
- Aromatic compounds (1)
- Aromatische Verbindungen (1)
- Arzt (1)
- Asphaltmastix (1)
- Asphaltstraße (1)
- Atem (1)
- Atives Sicherheitssystem (1)
- Attitude (1)
- Audible warning devices (1)
- Auffharunfall (1)
- Auflager (Brücke) (1)
- Aufprall (1)
- Auftauen (1)
- Auftaumittel ; Berechnung (1)
- Aufzeichung (1)
- Aural signal (1)
- Ausbildung (1)
- Ausbreitung (1)
- Ausfahrt (1)
- Aushub (1)
- Auspuff (1)
- Automatic vehicle location (1)
- Autonomes Fahren (1)
- Autonomes Fahrzeug (1)
- Autonomous driving (1)
- Autonomous vehicle (1)
- Autotür (1)
- Außenseite (1)
- Axis (1)
- Back (human) (1)
- Basecourse (1)
- Batterie (1)
- Battery (1)
- Bauausführung (1)
- Baum (1)
- Bauwerksmonitoring (1)
- Bearing (bridge) (1)
- Behavior (1)
- Bein [menschl] (1)
- Bend (road) (1)
- Beruf (1)
- Berufsausbildung (1)
- Bestand (1)
- Bestandsaufnahme (1)
- Bezahlung (1)
- Bibliographie (1)
- Bibliography (1)
- Bildanalyse (1)
- Bildschirm (1)
- Bindemittelgehalt (1)
- Binder content (1)
- Binderschicht (1)
- Biomasse (1)
- Bitumenemulsion (1)
- Bituminous mixtures (1)
- Blasting (1)
- Bodenhaftung (1)
- Bogenbrücke (1)
- Bohrkern (1)
- Bone (1)
- Bordstein (1)
- Brain (1)
- Brake lining (1)
- Braking distance (1)
- Brasilien (1)
- Brazil (1)
- Breaking (1)
- Breath (1)
- Bremsbelag (1)
- Brennbarkeit (1)
- Bridge management system (1)
- Brücken Management System (1)
- Bus stop (1)
- By product (1)
- Bypass (loop road) (1)
- Böschung (1)
- Böschungsbefestigung (1)
- Cadaver (1)
- Capacity (veh) (1)
- Car door (1)
- Caron monoxide (1)
- Certification (1)
- Chemie (1)
- Chemistry (1)
- Chest (1)
- Children (1)
- Chippings (1)
- Climate (1)
- Coarse aggregate (1)
- Cognitive impairment (1)
- Cohesion (1)
- Cold (1)
- Cold coated material (1)
- Color (1)
- Colthing (1)
- Compliance (1)
- Compressibility (1)
- Computation (1)
- Computer (1)
- Computerspiel (1)
- Concentration (chem.) (1)
- Conference; Germany; Injury; Medical examination; Spinal column; X ray (1)
- Congestion (traffic) (1)
- Contact (tyre (1)
- Continously graded aggregate (1)
- Contractor (1)
- Core (Boring) (1)
- Correction (1)
- Correlation (math (1)
- Coupling (1)
- Crashtest (1)
- Creep (mater) (1)
- Crimes (1)
- Cross road (1)
- Cross roads (1)
- Cross sections (1)
- Cross-border traffic (1)
- Curve (math) (1)
- Customer (1)
- Data base (1)
- Data file (1)
- Data files (1)
- Data protection (1)
- Data security (1)
- Data transmission (telekom) (1)
- Datenanalyse (1)
- Datenschutz (1)
- Datensicherheit (1)
- Datenübertragung (Telekom) (1)
- Dauer (1)
- Day (1)
- Deckenerneuerung (1)
- Deformierbare Barriere (Anpralltest) (1)
- Deformierte Barriere (Anpralltest) (1)
- Degree of saturation (mater) (1)
- Delivery service (1)
- Denmark (1)
- Density (1)
- Deposit (natural) (1)
- Design (1)
- Deutschland ; Entwicklung (1)
- Deutschland ; Fahrtauglichkeit (1)
- Dichte (1)
- Digital Computer (1)
- Dimension (1)
- Displacement (1)
- Dissertation (1)
- Dowel (1)
- Driver improvement programs (1)
- Driver in formation (1)
- Driver rehabilitation (1)
- Driver taining (1)
- Driving (veh) ; Evaluation (1)
- Driving aid (electronic) (1)
- Driving simulator (1)
- Dryness (1)
- Dtetection (1)
- Dummy (1)
- Durchgangsverkehr (1)
- Durchsichtigkeit (1)
- Dusk (1)
- Dynamic penetration test (1)
- Dämmerung (1)
- Dänemark (1)
- Dübel (1)
- EU Richtlinie (1)
- Echtzeit (1)
- Ecological engineering (1)
- Economics of transport (1)
- Effizienz (1)
- Eichung (1)
- Einkommensschwache Schichten (1)
- Ejection (1)
- Elektronisches Stabilitätsprogram (1)
- Emergency exit (1)
- Emergency medical aid (1)
- Energieeinsparung (1)
- Energieverbrauch (1)
- Energy conservation (1)
- Enteignung (1)
- Entgleisung (Zug) (1)
- Entschädigung (1)
- Environmental compatibility (1)
- Epilepsie (1)
- Epilepsy (1)
- Erkennbarkeit (1)
- Erneuerbare Energie (1)
- Ernährung (1)
- Ersatzdroge (1)
- Erschließung (1)
- Ethanol (1)
- Evaluation (Assessment) (1)
- Evaluation assessment (1)
- Event data recorder (Road vehicle) (1)
- Excavation (1)
- Excavation (process) (1)
- Exhaust pipe (1)
- Exhibition (1)
- Exit (1)
- Explosion (1)
- Expressway (1)
- Expropriation (1)
- Extraction (1)
- Extraktion (1)
- Face (human) (1)
- Fachwerk (1)
- Facility (1)
- Fahrer ; Fahrerassistenzsystem (1)
- Fahrerfahrung (1)
- Fahrerinformationen (1)
- Fahrernacherziehung (1)
- Fahrgastinformation (1)
- Fahrschule (1)
- Fahrzeugdach (1)
- Fahrzeugfuehrung (1)
- Fahrzeugmarkierung (1)
- Fahrzeugwartung (1)
- Falschfahren (1)
- Farbe (1)
- Fatigue (mech) (1)
- Fear (1)
- Fehlstelle (1)
- Fein (mater) (1)
- Feldspat (1)
- Felsmechanik (1)
- Felspar (1)
- Fence (1)
- Fernsteuerung (1)
- Feuchte (1)
- Field test (1)
- Fine (mater) (1)
- Flammability (1)
- Flow (fluid) (1)
- Flugsicherung (1)
- Fluid dynamics (1)
- Flächennutzungsplan (1)
- Flächentragwerk (1)
- Flüssigkeit (1)
- Foamed bitumen (1)
- Fog (1)
- Food (1)
- Foot (not a measure) (1)
- Force (1)
- Fortbildung (1)
- Fotoelektrisch (1)
- Foundation (1)
- Frame (1)
- Freeways (1)
- Freeze thaw durability (1)
- Freight transport (1)
- Freizeit (1)
- Friction (1)
- Frost blanket (1)
- Frostschutzschicht (1)
- Fruchtsaft (1)
- Fruit (1)
- Fruit juice (1)
- Fuel tank (1)
- Furcht (1)
- Fussgänger (1)
- Fuß (1)
- Fußgängerüberweg (1)
- Gabbro (1)
- Gabion (1)
- Gabione (1)
- Gebiet (1)
- Gebirge (1)
- Gefahrenabwehr (1)
- Gefahrguttransport (1)
- Gehirn (1)
- Gehweg (1)
- Gelenk (1)
- Geografisches Information System (1)
- Geographic information system (1)
- Geometry (shape) (1)
- Geophysic (1)
- Geophysik (1)
- Geradeausverkehr (1)
- Germany ; Injury (1)
- Germany Inventory (1)
- Geschlechtsspezifisch (1)
- Gesicht (1)
- Gesteinskörnung (1)
- Gewinnung (1)
- Gleichbehandlung (1)
- Global Positioning System (1)
- Globales Positionierungssystem (1)
- Greenhouse effect (1)
- Greenhouse gas (1)
- Grenze (1)
- Grenzfläche (1)
- Grenzverkehr (1)
- Großveranstaltung (1)
- Grunderwerb (1)
- Gründung (1)
- Guardrail (1)
- Haltestelle (1)
- Halteverbot (1)
- Hand (1)
- Hanger (1)
- Haptisch (1)
- Harmonisierung (1)
- Hazardous material (1)
- Hearing (1)
- Height (1)
- Herausschleudern (1)
- Herstelllung (1)
- Hinge (1)
- Hip (human) (1)
- Hochleistungsbeton (1)
- Hohlprofil (1)
- Holz (1)
- Homogeneity (1)
- Homogenität (1)
- Horizontal (1)
- Hospitsl (1)
- Hour (1)
- Hydraulic properties (1)
- Hydraulische Eigenschaften (1)
- Hydrophob (1)
- Hydrophobic (1)
- Hängebrücke (1)
- Hänger (1)
- Höhe (1)
- Hörvermögen (1)
- Hüfte (1)
- Hüllrohr (1)
- Image analysis (1)
- Image generation (1)
- Impact (collision) (1)
- Impact study (environment) (1)
- Impregnation (1)
- Imprägnierung (1)
- Indemnity (1)
- Industrierückstand (1)
- Inertia reel safety belt (1)
- Infotainment System (1)
- Infotainment system (1)
- Infrastructure (1)
- Ingenieurbiologie (1)
- Injection (Materials) (1)
- Inpact study (1)
- Instruments for measuring fluid properties or phenomena (1)
- Intelligent Transport System (1)
- Interface (1)
- International borders (1)
- Ireland (1)
- Irland (1)
- Jahresbericht (1)
- Jahreszeit (1)
- Jdtv (1)
- Kabel (1)
- Kalibrierung (1)
- Kaltmischgut (1)
- Kapazität (Fahrzeug) (1)
- Karte (1)
- Katalysator (1)
- Kerb (1)
- Kerbeffekt (1)
- Klima (1)
- Knochen (1)
- Knoten ohne Signalsteuerung (1)
- Knotenpunkt ; Landstraße ; Lkw (1)
- Kognitive Beeinträchtigung (1)
- Kohäsion (1)
- Kontakt-Reifen-Straße (1)
- Konzentration (1)
- Korea (Süd) (1)
- Kornverteilung (1)
- Korrektur (1)
- Korrelation (math (1)
- Korrelation [math (1)
- Kraft (1)
- Kraftstofftank (1)
- Krankenfahrstuhl (1)
- Kriechen (1)
- Kunde (1)
- Kupplung (1)
- Kurs (Vorlesung) (1)
- Kurve (math) (1)
- Kälte (1)
- Körperhaltung (1)
- Körperstellung (1)
- Ladungssicherung (1)
- Land acquisition (1)
- Landscaping (1)
- Landschaftsgestaltung (1)
- Landslide (1)
- Lang Lkw (1)
- Lang-Lkw (1)
- Lap strap (1)
- Lateral (1)
- Lateral collision (1)
- Lattice (1)
- Law enforcement (1)
- Learning (1)
- Leasing (1)
- Lecture (1)
- Leichnam (1)
- Leistungsfähigkeit (Allg.) (1)
- Level of Service (1)
- Lieferung (1)
- Light commercial vehicle (1)
- Liquid (1)
- Literaturstudie (1)
- Load fastening (1)
- Loads (1)
- Lockerboden (1)
- Logistics (1)
- Logistik (1)
- Low income (1)
- Low traffic road (1)
- Löslich (chem) (1)
- Lösung (chem) (1)
- Macro (1)
- Macrotexture (1)
- Magnetism (1)
- Magnetismus (1)
- Main Road (1)
- Makro (1)
- Makrotextur (1)
- Malaysia (1)
- Manuell (1)
- Map (1)
- Mass spectrometry (1)
- Massenspektrometrie (1)
- Mastic asphalt (1)
- Mathematical Model (1)
- Mathematical analysis (1)
- Mauer (1)
- Mean (math) (1)
- Mechanics (1)
- Mechanik (1)
- Mehrspurig ; Straßenentwurf (1)
- Membran (1)
- Text (1)
- Metal (1)
- Metall (1)
- Methanol (1)
- Methode der Finiten Elemente (1)
- Methodology (1)
- Microtexture (1)
- Mieten (1)
- Mikrotextur (1)
- Minderung (1)
- Mineral (1)
- Model (not Math) (1)
- Modell (not math) (1)
- Monat (1)
- Month (1)
- Moped (1)
- Motorisierungsgrad (1)
- Mountain (1)
- Multilane (1)
- Multiple collision (1)
- Multiple vehicle accident (1)
- Nachricht (1)
- Nachtrunk (1)
- Nasse Strasse (1)
- Nature protection (1)
- Naturstein (1)
- Nebel (1)
- Nebenstraße (1)
- Nerve (1)
- Nerven (1)
- Neurologie (1)
- Neurology (1)
- Niedrigtemperaturasphalt (1)
- Nigeria (1)
- No stopping (1)
- Nordamerika (1)
- North America (1)
- Norway (1)
- Norwegen (1)
- Notausgang (1)
- Notch effect (1)
- Obst (1)
- Offenporiger Asphalt (1)
- Offset impact test (1)
- On the right (1)
- On the spot investigation (1)
- Operational research (1)
- Operations (Transp network) (1)
- Operations (transp network) (1)
- Operations Research (1)
- Optics (1)
- Optik (1)
- Optimierung (1)
- Organic (1)
- Organic compounds (1)
- Organisation ; Statistik (1)
- Overhead traffic sign (1)
- Overturning (1)
- Oxidation (1)
- Oxygen (1)
- Padding (safety) (1)
- Parking facilities (1)
- Parking place (one veh only) (1)
- Parkraum (1)
- Parkstand (einzeln) (1)
- Particle size distribution (1)
- Passenger information (1)
- Passenger traffic (1)
- Pavement management system (1)
- Paver (1)
- Payment (1)
- Pedestrian crossing (1)
- Pendel (1)
- Pendulum (1)
- Pendulum tests (1)
- Personenverkehr (1)
- Pflasterstein (1)
- Pfosten (1)
- Photoelectrical (1)
- Physically handicapped person (1)
- Physiologie (1)
- Physiology (1)
- Piezoelectricity (1)
- Piezoelektrizität (1)
- Pipe (1)
- Planfreier Knotenpunkt (1)
- Plastic (1)
- Pole (1)
- Polymerisierung (1)
- Polymerization (1)
- Polyolefin (1)
- Polyvinylhydrocarbon (1)
- Poren (1)
- Porous materials (1)
- Porphyr (1)
- Porphyry (1)
- Position (1)
- Post tensioning (1)
- Postcrash phase (1)
- Pothole (1)
- Precision (1)
- Pregnancy (1)
- Pricing (1)
- Privat (1)
- Private (1)
- Privatisation (1)
- Privatization (1)
- Profilierter Randstreifen (1)
- Programmed learning (1)
- Prohibiton (1)
- Protective helmet (1)
- Prüfkörper (1)
- Prüfung (1)
- Pssives Sicherheitssystem (1)
- Psychose (1)
- Psychosis (1)
- Public-Private-Partnership (1)
- Pumpeffekt (1)
- QAccident (1)
- Quality Management System (1)
- Quartz (1)
- Quarz (1)
- Quick (1)
- Rad (1)
- Radial (1)
- Rahmen (Statik) (1)
- Rail bound transport (1)
- Rammsondierung (1)
- Ramp metering (1)
- Rastplatz (1)
- Rate of compaction (1)
- Rauheit (1)
- Real time (1)
- Recidicist (1)
- Reconstruction [accid] (1)
- Recreation (1)
- Red light (1)
- Reduction (decrease) (1)
- Reflectorized material (1)
- Reflexstoffe (1)
- Regional planning (1)
- Rehabilitation (Road user) (1)
- Reibung (1)
- Reinforcing materials (1)
- Remote control (1)
- Republic of Corea (1)
- Research Report (1)
- Research projects (1)
- Research projekt (1)
- Research reports (1)
- Reserch report (1)
- Residential area (1)
- Resurfacing (1)
- Resuscitation (1)
- Retaining wall (1)
- Reversing (veh) (1)
- Rheological properties (1)
- Rheometer (1)
- Rib (1)
- Richtlinie (1)
- Risikoverhalten (1)
- Road base (1)
- Road heating (1)
- Road pricing (1)
- Road transport (1)
- Road verge (1)
- Robot (1)
- Roboter (1)
- Rock (1)
- Rock mechanics (1)
- Rohrknoten (1)
- Rohrleitung (1)
- Roll over (veh) (1)
- Roller (1)
- Roof (veh) (1)
- Rotation (1)
- Rsk (1)
- Rumpelstreifen (1)
- Run oo the road (accid) (1)
- Rupture (1)
- Rutschung (1)
- Röntgenstrahlung (1)
- Rücken (1)
- Rückwärtsfahren (1)
- Safety glass (1)
- Safety harness (1)
- Safety system (1)
- Saftey (1)
- Salt (deicing) (1)
- Sanitary facilities (1)
- Sanitäre Anlagen (1)
- Sauerstoff (1)
- Schaumbitumen (1)
- Schienentransport (1)
- Schlagloch (1)
- Schnee (1)
- Schneeräumgerät (1)
- Schneeräumung (1)
- Schnell (1)
- Schotter (1)
- Schubmodul (1)
- Schwangerschaft (1)
- Schweißen (1)
- Schweißknoten (1)
- Schweregrad (UNfall (1)
- Schätzung (1)
- Sealing coat (on top of the surfacing) (1)
- Season (1)
- Seat (1)
- Seat belt (1)
- Seat harness (1)
- Secondary road (1)
- Seepage (1)
- Segregation (traffic (1)
- Selbsterklärende Straße (1)
- Selbstverdichtender Beton (1)
- Self compacting concrete (1)
- Service station (1)
- Sett (1)
- Settlement (1)
- Setzung (1)
- Severance (1)
- Severity (accid, injuy) (1)
- Shape (1)
- Shared Space (1)
- Shared space (1)
- Sheath (1)
- Shell (struct) (1)
- Sicherheit; (1)
- Sicherheitsglas (1)
- Sicherheitspolsterung (1)
- Sichtbarkeit ; Versuch (1)
- Sickerung (1)
- Signal (1)
- Signal (Zeichen) (1)
- Signalbrücke (1)
- Signalisierung (1)
- Significance (stat) (1)
- Skid resistance (1)
- Slab pumping (1)
- Slope (terrain) (1)
- Slope stability (1)
- Smoothness (1)
- Snow (1)
- Snow clearance (1)
- Snow clearance equipment (1)
- Sociology (1)
- Sozialisation (1)
- Soziologie (1)
- Span (1)
- Spannweite (1)
- Speed control (1)
- Speed control (struct elem) (1)
- Speed) (1)
- Sperrsignal (1)
- Spinal calum (1)
- Splitt (1)
- Sprache (1)
- Spritzbeton (1)
- Sri Lanka (1)
- Stadtentwicklung (1)
- Stated preferences (1)
- Statistik (math) (1)
- Stickoxide (1)
- Stochastic Process (1)
- Stochastisch (1)
- Stop (Public transport) (1)
- Stopping distance (1)
- Stossdämpfer (1)
- Straight ahead (traffic) (1)
- Strasse (1)
- Straßenbenutzungsgebühr (1)
- Straßenheizung (1)
- Straßenkurve (1)
- Straßentransport (1)
- Strength of materials (1)
- Stripping (binder) (1)
- Structural health monitoring (1)
- Structure (geomorphol) (1)
- Struktur (geomorphol) (1)
- Strömung (1)
- Stunde (1)
- Störfall (1)
- Störfalldetektion (1)
- Stützwand (1)
- Subgrade (1)
- Subsequent drink (1)
- Substitution drugs (1)
- Suspension (veh) (1)
- Suspension bridge (1)
- Sättigungsgrad (mater) (1)
- T Träger (1)
- T beam (1)
- Tactile (1)
- Tactile perception (1)
- Taking (Property) (1)
- Tal (1)
- Tankstelle (1)
- Tarif (1)
- Tariff (1)
- Tastbar (1)
- Tax (1)
- Technische Vorschriften (1)
- Technische Überwachung (Fahrzeug) (1)
- Technische Überwachung (allg) (1)
- Teenage driver (1)
- Telematic (1)
- Telematics; Traffic control (1)
- Temperaturabgesenkter Asphalt (1)
- Tender (1)
- Tension test (1)
- Test procedure (1)
- Test rig (1)
- Testing Rig (1)
- Thailand (1)
- Thaw (1)
- Thermoplast (1)
- Thermoplastic (1)
- Thesis (1)
- Through traffic (1)
- Timbering (1)
- Toedlicher Unfall (1)
- Toleranz (stat) (1)
- Tower (Bridge) (1)
- Tower (bridge) (1)
- Traffic Control (1)
- Traffic Lane (1)
- Traffic composition (1)
- Traffic delay (1)
- Traffic relief (1)
- Traffic survey ; Travel survey (1)
- Transparent (1)
- Transport (1)
- Transport network (1)
- Transportat mode (1)
- Transportation infrastructure (1)
- Travel survey (1)
- Travel time (1)
- Traveler (1)
- Treibhauseffekt (1)
- Treibhausgas (1)
- Trennfunktion (Straße) (1)
- Triaxial shear tests (1)
- Trockenheit (1)
- Truck (1)
- Two dimensional (1)
- Ultraschall (1)
- Ultrasonic (1)
- Ultraviolet (1)
- Ultraviolett (1)
- Umwelt Unfallverhütung (1)
- Umweltfreundlichkeit (1)
- Umweltverschmutzung (1)
- Unbound base (1)
- Uncontrolled junction (1)
- Unfalldaten (1)
- Unfallfolgephase (1)
- Unfallrate (1)
- Unfallrekonsruktion (1)
- Unfallspurensicherung (1)
- Unfallverhütug (1)
- Ungebundene Tragschicht (1)
- Ungeschützter Verkehrsteilnehmer (1)
- United Nations (1)
- Unterbau (1)
- Untersuchung am Umfallort (1)
- Urin (1)
- Urine (1)
- Usa (1)
- Valley (1)
- Vehicle inspection (1)
- Vehicle maintenance (1)
- Vehicle marking (conspicuity) (1)
- Vehicle mix (1)
- Vehicle ownership (1)
- Vehicle safety (1)
- Vehicle tracking (location) (1)
- Veletzung) (1)
- Verankerung (1)
- Verbau (1)
- Verdichtungsgrad (1)
- Vereinigtes Königreichl (1)
- Vereinte Nationen (1)
- Verfahen (1)
- Verformungswiderstand (1)
- Verkehrsarme Straße (1)
- Verkehrsberuhigung (1)
- Verkehrsentlastung (1)
- Verkehrsentmischung (1)
- Verkehrsinformation (1)
- Verkehrsmittel (1)
- Verkehrsstaerke (1)
- Verkehrstherapie (1)
- Verkehrsumlegung (1)
- Verkehrswirtschaft (1)
- Verlust (1)
- Vermeidung (1)
- Verpressung (1)
- Versiegelung (1)
- Verspätung (1)
- Verstärkung (Brücke) (1)
- Versuchsstraße (1)
- Vertical (1)
- Vertikal (1)
- Vertragspartner (1)
- Vorbelastung (1)
- Vorspannung mit nachtr Verbund (1)
- Vulnerable road user (1)
- Walkways (1)
- Wall (1)
- Walzasphalt (1)
- Walze (1)
- Warm mix asphalt (1)
- Waschbeton (1)
- Waste disposal (1)
- Weak ground (1)
- Web site (1)
- Website (1)
- Wheel (1)
- Window (veh) (1)
- Windscreen (veh) (1)
- Windshield (1)
- Wohngebiet (1)
- Women (1)
- Wood (1)
- Workplace (1)
- Wrong way driving (1)
- Zahl (1)
- Zentrale Verkehrssteuerung (1)
- Zertifizierung (1)
- Zinc (1)
- Zink (1)
- Zu schnelle Fahren (1)
- Zu schnelles Fahren (1)
- Zufahrtsstraße (1)
- Zuflussregelung (1)
- Zusammendrückbarkeit (1)
- Zusatzmittel (1)
- Zweidimensional (1)
- accident (1)
- aktives Sicherheitssystem (1)
- analyses (math) (1)
- ar (1)
- efficiency (1)
- fatality (1)
- finite element method (1)
- head (1)
- material (constr) (1)
- pedestrians) (1)
- road) (1)
- sicherheit (1)
- simulation (1)
- stat) (1)
- stat] (1)
- tödlicher Unfall (1)
- Ästhetik (1)
- Öffentlich-Private-Partnerschaft (1)
- Überrollung (1)
In Deutschland existieren bereits seit Jahren viele leistungsfähige Telematiksysteme und Referenzarchitekturen für Teilbereiche, z. B. TLS (BASt, 2002) und MARZ (BASt, 1999) zum Aufbau von Verkehrsbeeinflussungsanlagen an Bundesfernstraßen. Die Entwicklungen solcher Systeme in Deutschland gehen bis in die 1990er Jahre und davor zurück. Zum Teil wurden diese Ansätze auch von anderen Ländern übernommen und sind dort erfolgreich implementiert. Bislang fehlt aber in Deutschland ein nationaler Orientierungsrahmen für den Aufbau und die Vernetzung von Telematiksystemen, sodass viele Implementierungen als unvernetzte Insellösungen betrieben werden und mögliche Synergien ungenutzt bleiben. Die Vorteile einer übergreifenden ITS-Architektur wurden bereits durch zahlreiche Arbeiten seit den frühen 1990er Jahren belegt und sind heute unstrittig. In anderen Ländern liegen solche nationalen Orientierungsrahmen bereits seit Jahren vor. Die USA hat als erstes Land im Jahr 1996 eine nationale ITS-Architektur (NITSA) veröffentlicht, die bis heute bereits zur sechsten Version fortgeschrieben wurde. Im Rahmen dieser Entwicklungen wurde ein ganzes Netz an Zuständigkeiten und Organisationseinheiten eingerichtet, um eine effiziente und nachhaltige Nutzung der NITSA zu gewährleisten. Auch rechtliche Maßnahmen wurden ergriffen, um eine Verbindlichkeit für die Anwendung der ITS-Architektur in Teilen zu erreichen und deren Verbreitung zu sichern. Viele andere Länder ausserhalb und innerhalb Europas besitzen ebenfalls seit Jahren eigene nationale ITS-Architekturen. Auf europäischer Ebene gibt es bereits seit den frühen 1990er Jahren Forschungsprojekte zu einer europaweit harmonisierten ITS-Architektur. Mit KAREN wurde im Jahr 2000 die erste Version einer europäischen ITS-Rahmenarchitektur veröffentlicht. In den FRAME-Projekten, bis hin zum aktuellen Projekt E-FRAME, wurde und wird diese ITS-Architektur fortgeschrieben. In der europäischen Verkehrspolitik spielt die Telematik eine wesentliche Rolle. Mit dem Aktionsplan zur Einführung von ITS in Europa (KOM(2008) 886) oder dem Richtlinienvorschlag zur Festlegung eines Rahmens für die Einführung von ITS im Straßenverkehr (KOM(2008) 887) sind gezielte Maßnahmen, auch im Hinblick auf eine europäische ITS-Architektur, in Vorbereitung. Deutschland nimmt im Angesicht dieser Entwicklungen eine Sonderrolle ein, weil hier noch kein Orientierungsrahmen zum Aufbau einer nationalen ITS-Architektur geschaffen wurde. Dass solch ein Orientierungsrahmen anzustreben ist, wird von allen beteiligten Interessengruppen aus dem Bereich ITS gleichermaßen vertreten. Im Rahmen dieses Forschungsprojekts wurde ein Workshop durchgeführt, der dies deutlich bestätigte. Das wesentliche Ziel dieses Forschungsprojekts bestand darin, aus den Entwicklungsprozessen und Erfahrungen in anderen Ländern und den bisherigen Erfahrungen im Inland Empfehlungen für den Aufbau einer nationalen ITS-Architektur in Deutschland abzuleiten. Dazu wurden zunächst im Rahmen einer Strukturierung Begriffsbestimmungen vorgenommen und ein Beschreibungs- und Bewertungsschema für die Analyse von ITS-Architekturen entwickelt. Ein Workshop wurde durchgeführt, um einen Eindruck über die Standpunkte der beteiligten Interessengruppen zu gewinnen und festzustellen, wie der Prozess für die Entwicklung einer nationalen ITS-Architektur in Deutschland begonnen werden könnte. Im Anschluss an diese Arbeiten wurden zum einen eine Auswahl von Beispielen für ITS-Architekturen in Deutschland und zum anderen nationale ITS-Architekturen weltweit analysiert. Aus den Analysen wurden Handlungsempfehlungen für die Entwicklung einer ITS-Architektur für Deutschland abgeleitet. Diese Empfehlungen beziehen sich zum einen auf den gesamten Prozess zur Erstellung und Fortschreibung einer nationalen ITS-Architektur und zum anderen auf die Inhalte der zu erarbeiteten Dokumente wie des nationalen ITS-Leitbilds und des nationalen ITS-Rahmenplans, der Rahmenarchitektur und der Referenzarchitekturen. Als Ergebnis dieses Forschungsprojekts wurden 40 Empfehlungen für den Aufbau einer nationalen ITS-Architektur in Deutschland formuliert.
Elektronik und IT werden auch im Automobilbereich zunehmend Gegenstand unautorisierter Veränderungen. Diese Studie stellt einen ersten, breiteren Überblick über die praktische Relevanz elektronischer Veränderungen an Fahrzeug- und Infrastruktursystemen dar. Es liefert einen Überblick über wesentliche bekannte und existente Beispiele von Möglichkeiten derartiger Veränderungen, das Risiko ihres Auftretens und damit verbundene Gefahren. Die Ergebnisse basieren auf einer Recherche, die neben wissenschaftlichen Quellen insbesondere das Internet als neues, interaktives Medium einbezieht. Es werden Abschätzungen zur praktischen Relevanz dieser Veränderungen vorgenommen und potentielle Folgen insbesondere für die Verkehrssicherheit reflektiert. Praktische Hinweise auf elektronische Veränderungen sind an 24 Fahrzeug- und Infrastruktursystemen dokumentiert, die als Ziel teils mehrerer Arten von elektronischen Veränderungen identifiziert wurden. Dies erstreckt sich über verschiedene Domänen wie u.a. den Antriebstrang, das Fahrwerk, Infotainment, Fahrerassistenz und mehrere Infrastrukturkomponenten. Diese Systematisierung enthält zudem eine Klassifikation der agierenden Personen, wobei deren individuelle Motivationen, technische Kenntnisse und Ausstattung unterschieden werden. Das Spektrum potentiell resultierender Gefahren wird einerseits theoretisch anhand der erstellten Systematisierungen aufgezeigt und andererseits an 19 Rechercheergebnissen aus verschiedenen Bereichen illustriert. Die so vorgenommene Analyse des Gefährdungspotentials wird ergänzt durch einen Ausblick auf potentielle zukünftige Gefährdungen, die sich insbesondere in kommenden Car-to-Car Kommunikationsnetzen ergeben könnten und die weitere Erforschung von Schutzkonzepten motivieren. Während die recherchierten Veränderungen heute noch meist vom Nutzer ausgehen und das Gefährdungspotential häufig unbeabsichtigt entsteht, könnte zukünftig das vorsätzliche Herbeiführen von Gefährdungen an Bedeutung gewinnen.
Ziel des bearbeiteten Forschungsvorhabens war die Untersuchung des Verhaltens von Brücken aus hochfestem Beton. Im Rahmen des vorliegenden Vorhabens wurden drei bestehende Brücken aus hochfestem Beton hinsichtlich der visuell zu bewertenden Oberflächenbeschaffenheit und der mit Hilfe von Messungen ermittelten Karbonatisierungstiefe und Chlorideindringung bewertet: eine Brücke im Zuge der Straße nach Wölkau über die BAB A 17, BW-Nr. 5048569; die Überführung des Eigentümerweges "Freihamer Allee" über die BAB A 96/99, BW-Nr. 7834699; sowie Bauwerk 27-1 Überführung eines Wirtschaftsweges, Buchloe, BW-Nr. 7930585. Dabei konnte festgestellt werden, dass sich der hochfeste Beton hinsichtlich der Karbonatisierungstiefen wie erwartet als sehr dauerhaft erweist. Durch seine dichte Struktur ist nahezu keine Karbonatisierung an den Bauteilen aus hochfestem Beton zu verzeichnen. Lediglich die aus hochfestem Beton hergestellten Pfeiler der Brücken Buchloe und Freihamer Allee zeigen Netzrisse, die auf ungenügende Nachbehandlung der Bauteile zurückgeführt werden könnte. Weiterhin wurde an der Muldebruecke Glauchau der bereits vor Verkehrsfreigabe durchgeführte Belastungstest wiederholt, bei der die damaligen Lastpositionen erneut aufgebracht wurden. Auch hier konnte gezeigt werden, dass sich das hervorragende Tragverhalten auch nach acht Jahren der Nutzung unverändert zeigt. Die große Steifigkeit des Überbaus ist unverändert. Insgesamt konnte festgestellt werden, dass die untersuchten Brücken aus hochfestem Beton die an sie gestellten Anforderungen hinsichtlich Dauerhaftigkeit und Tragverhalten erfüllen. Eventuell wäre zu überprüfen, inwieweit andere Bauteile (insbesondere Pfeiler) aus hochfestem Beton eine ähnliche Netzrissbildung aufweisen. Bei einem Vergleich der Bautagebücher ließen sich möglicherweise Rückschlüsse auf die Einflussfaktoren auf die Rissbildung ziehen.
Eine Bewertung für Betone, die den Anforderungen der Expositionsklasse XF2 genügen sollen, ist derzeit nur nach dem deskriptiven Konzept möglich. Um den Frost-Tausalz-Widerstand von Betonen in der Expositionsklasse XF2 durch ein Laborprüfverfahren nachweisen zu können, wurde in den letzten Jahren das modifizierte CDF-Verfahren (XF2) entwickelt, das einen abgeschwächten Frost-Tausalz-Angriff gemäß XF2-Exposition erzeugt und eine Beurteilung des Frost-Tausalz-Widerstandes bei mäßiger Sättigung zulässt. Hierbei wird bei gleicher Abkühlrate wie beim bekannten CDF-Verfahren für die Exposition XF4 die Minimaltemperatur auf -10 -°C angehoben und die Prüfdauer auf 14 Frost-Tau-Wechsel verkürzt. Aufgrund der geringen Datenbasis war es bisher nicht möglich ein Abnahmekriterium festzulegen, mit dem für die Expositionsklasse XF2 geeignete Betonzusammensetzungen zuverlässig von ungeeigneten unterschieden werden können. Auch konnte das Prüfverfahren für eine Validierung noch nicht ausreichend charakterisiert werden. Eine Validierung des Prüfverfahrens würde es ermöglichen, Betonmischungen auch in der Expositionsklasse XF2 zu bewerten. Die Ziele des Forschungsvorhabens waren deshalb, eine Empfehlung für ein an der Praxis orientiertes Abnahmekriterium zu geben und das modifizierte CDF-Verfahren (XF2) zu validieren. Da eine Bewertung des Frost-Tausalz-Widerstands über ein Laborprüfverfahren nur dann möglich ist, wenn ein an der Praxis orientierter Grenzwert vorliegt, wurde auf Basis der Prüfung von 17 verschiedenen Betonrezepturen eine Empfehlung für ein Abnahmekriterium von 1000 g/m-² mittlerer aufsummierter Abwitterung nach 14 Frost-Tau-Wechseln gegeben. Dieses Kriterium gilt für die untersuchten Betone, die bis auf die Mindestdruckfestigkeit die Anforderungen an die DIN-Normen erfüllen. Um die Prüfstreuung des modifizierten CDF-Verfahrens (XF2) zu beurteilen und damit die Qualität des Prüfverfahrens abschätzen zu können, wurden die Präzisionsdaten in Anlehnung an DIN ISO 5725 ermittelt. Die Präzision ist ein wichtiges Kriterium für die Qualität eines Prüfverfahrens. Die Wiederholpräzision wurde am cbm der TU München durch die Prüfung von 29 Betonen mit 17 verschiedenen Zusammensetzungen bestimmt. Bei einer mittleren Abwitterung von 1500 g/m-² lag die Wiederholpräzision mit rund 13 % leicht über der Wiederholpräzision, die für das bereits bekannte CDF-Verfahren ermittelt wurde. Für eine mittlere aufsummierte Abwitterung von 1000 g/m-² ergibt sich ein Variationskoeffizient von 13,9 %. Die Präzision unter Zwischenbedingungen umfasst den Einfluss aus der Betoncharge (Zeit) sowie aus unterschiedlichen Bearbeitern und Prüfgeräten. Die in diesem Forschungsvorhaben durchgeführten Untersuchungen zeigten mit einem Variationskoeffizienten von 18% bei einer mittleren Abwitterung von 1000 g/m-² eine verhältnismäßig geringe Streuung der Prüfergebnisse unter Zwischenbedingungen. Die Vergleichspräzision gibt das Maximum der Streuung an. Sie wird durch Messungen unter veränderlichen Bedingungen (verschiedenen Labors, verschiedenen Bearbeiter und verschiedene Geräteausstattung) ermittelt. Zur Bestimmung der Vergleichspräzision wurde ein Ringversuch durchgeführt, an dem sich fünf deutsche Institute beteiligten. Untersucht wurden drei Betone, die sich deutlich in ihrem Frost-Tausalz-Widerstand unterschieden. Die Betonqualitäten konnten eindeutig voneinander unterschieden werden. Alle Institute ermittelten für jeden Beton eine Steigung im Abwitterungsverlauf, die der erwarteten Schädigung entsprach. Bei einer mittleren Abwitterung von 1000 g/m-² ergab sich ein Variationskoeffizient unter Vergleichsbedingungen von 26 %. Zusammenfassend kann festgestellt werden, dass das modifizierte CDF-Verfahren (XF2) gemäß DIN EN ISO 17025 validiert ist. Die Korrelation zur Praxis wurde bereits in einem vorangegangen Forschungsvorhaben festgestellt. Für die hier untersuchten Betone wurde ein Abnahmekriterium von 1000 g/m-² mittlerer aufsummierter Abwitterung nach 14 Frost-Tau-Wechseln abgeleitet. Die Präzision des modifizierten CDF-Verfahrens (XF2) liegt in der Größenordnung anderer etablierter Festbetonprüfungen (zum Beispiel der Druckfestigkeitsprüfung). Demnach liefert das modifizierte CDF-Verfahren (XF2) reproduzierbare und präzise Ergebnisse.
Volkswirtschaftliche Gesichtspunkte beim Bau und der Unterhaltung von Brückenbauwerken erfordern ein effektives Lebenszyklusmanagement. Ein wesentliches Ziel besteht dabei in der zuverlässigen Prognose der Schadensentwicklung. Die Kenntnis über Mechanismen und Auswirkungen einzelner dauerhaftigkeitsrelevanter Beanspruchungen bzw. Schädigungsarten ist relativ weit fortgeschritten. Demgegenüber ist das Wissen über die Wirkungsweise kombiniert auftretender Beanspruchungen an Betonbauwerken bislang unzureichend. Dies gilt auch für den Fall, dass gleichzeitig singuläre Risiken, wie beispielsweise Ausführungsmängel oder Lagerschäden vorliegen. Gerade aber kombinierte Einwirkungen und bereits vorhandene Mängel sind für massive Schäden an Brücken maßgeblich verantwortlich. Diese Problematik wurde im Rahmen der vorliegenden Machbarkeitsstudie eingehend beleuchtet. Zunächst wurden im Rahmen einer umfangreichen Literatursichtung die vorhandenen dauerhaftigkeitsrelevanten Einwirkungen auf Brücken identifiziert sowie deren mögliche Modellierung in Form von Schädigungs-Zeit-Gesetzen aufgezeigt und eingehend diskutiert. In einem nächsten Schritt konnten die bei Brückenbauwerken vorzufindenden Interaktionen zwischen den kombiniert auftretenden dauerhaftigkeitsrelevanten Einwirkungen und singulären Risiken auf der Basis einer Literatursichtung erfasst und in Form einer Interaktionsmatrix anschaulich dargestellt werden. Die verschiedenen Methoden zur Sicherstellung der Dauerhaftigkeit von Betonkonstruktionen wurden aufgezeigt sowie die Grundzüge einer System- und Risikoanalyse vorgestellt. Anhand ausgewählter Bespiele aus der Fachliteratur wurde die prinzipielle Vorgehensweise bei unterschiedlichen Methoden zur Dauerhaftigkeitsbeurteilung dargestellt. Besondere Beachtung galt dabei dem aktuellen Stand der Forschung im Umgang mit kombiniert auftretenden Einwirkungen. Im Ergebnis der umfangreichen Literaturstudie konnte festgestellt werden, dass kombinierte Einwirkungen als Problem im Bereich des Betonbrückenbaus bekannt sind, ihre Erfassung und Modellierung jedoch weder zeitvariante Schädigungs-Zeit-Gesetze noch baustofftechnologische Interaktionen berücksichtigen. Auf der Grundlage der in der Literatur gewonnenen Erkenntnisse wurde ein Ansatz für eine um diese beiden entscheidenden Punkte erweiterte System- und Risikoanalyse erarbeitet. Dieser Ansatz besteht darin, über die Verwendung geeigneter Schädigungs-Zeit-Gesetze und grenzzustandsbezogener Betrachtungen Lebensdauerprognosen durchzuführen. Hierdurch wird eine wirklichkeitsnahe Beurteilung der Dauerhaftigkeit möglich. Die Interaktion der Schädigungsmechanismen wird über einen Faktor η, der die baustofftechnologischen Veränderungen des Betons infolge einer anderen Einwirkung berücksichtigt, in das Modell aufgenommen. Das erarbeitete Konzept wurde durch exemplarische, computergestuetzte Beispielrechnungen hinsichtlich seiner Anwendbarkeit bestätigt. Bis zur Praxiseinführung dieser Methode bedarf es jedoch noch umfangreicher Ausarbeitungen und gezielter weiterführender Forschung.
Untersuchungen zur Querkraftbemessung von Spannbetonbalken mit girlandenförmiger Spanngliedführung
(2011)
Die Literaturrecherche zeigte, dass seit Beginn der Spannbetonbemessung der innere Hebelarm z auf der Grundlage von Annahmen bestimmt wird, die zum Teil stark variieren. Dies liegt vor allem daran, dass die Querkraftbemessung ursprünglich an Stahlbetonbauteilen hergeleitet wurde. Für Spannbetonbauteile wird in der Literatur ein Hebelarm von z=0,67d bis z=0,90d vorgeschlagen. Alle Quellen sind sich darüber einig, dass der Querkrafttraganteil der geneigten Spannglieder zu berücksichtigen ist. Des Weiteren sind Unterschiede in den aktuellen Normen zu finden. Während im DIN FB 102 im Allgemeinen der innere Hebelarm z aus dem Nachweis im GZT infolge Biegung mit oder ohne Längskraft im gleichen Querschnitt aus dem zugehörigen Moment verwendet werden soll, wird in der DIN 1045-1 nichts dergleichen erwähnt, sondern es darf z=0,9d angesetzt werden, sofern eine ausreichende Längsbewehrung aus Betonstahl vorhanden ist. Der EC 2 erlaubt hingegen den inneren Hebelarm z aus dem maximalen Biegemoment im betrachteten Bauteil zu berechnen. In einigen Literaturquellen, so auch im EC 2 wird außerdem gefordert, dass bei Bauteilen mit geneigten Spanngliedern ausreichend Betonstahllängsbewehrung im Zuggurt einzulegen ist. Die Auswertung der Stuttgarter Versuche zeigte, dass bei der Frage nach dem korrekten Ansatz für z zwei Bereiche zu unterscheiden sind. In dem Bereich, in dem die Schubrisse aus Biegeanrissen am Querschnittsrand entstehen ändert der Schubriss auf Höhe der Spannglieder seine Neigung. Die Änderung des Neigungswinkels ist abhängig von den Steifigkeitsverhältnissen der Zugbänder. Für diesen Bereich wird ein Ansatz vorgeschlagen, bei dem die Querschnittsflächen des Spannstahls Ap und Betonstahl As mit den für den Schub maßgebenden Spannungen gewichtet werden. Der Bereich, in dem die Spannglieder überdrückt sind und die flacher verlaufenden Schubrisse ohne Neigungswechsel kurz über die Spannglieder hinweg verlaufen, erstreckt sich horizontal vom Auflager bis zu ca. 1,5h. Hier wird das Stegfachwerk wesentlich entlastet durch den Druckbogen, der sich bei den hier untersuchten Trägern aufgrund der sehr schwachen schlaffen Zuggurtbewehrung zusammen mit der sich bis zum Auflager durchlaufenden Druckstrebe fast ausschließlich auf den Spannanker abstützt. Die Größe der gegebenenfalls erforderlichen schlaffen Zuggurtbewehrung für die Abdeckung der Zugkraft am Auflager muss noch untersucht werden.
Vor dem Hintergrund der erwarteten zukünftigen Klimaentwicklung mit veränderten Temperatur- und Niederschlagsverhältnissen wird das Gefährdungspotential für Schutzgüter durch Böschungsrutschungen möglicherweise ansteigen. Für den Neu- und Ausbau von Bundesfernstraßen und für die Unterhaltung des bestehenden Straßennetzes können sich hieraus zwangsläufig höhere Risiken ergeben. Daher soll eine geeignete Methodik zur Abschätzung des zukünftigen Gefährdungspotentials durch Rutschungen entwickelt und diese an Fallbeispielen angewendet werden. Anhand einer exemplarischen Auswahl von drei regionaltypischen Fallbeispielen, der Altmündener Wand (Südniedersachsen), dem Rutschhang Pünderich (Moseltal) und dem Wißberg (Rheinhessen) wurde eine Bewertung der dort bereits eingetretenen Rutschereignisse im besonderen Hinblick auf klimatologische Einflussgrößen durchgeführt. Die Rutschereignisse wurden mit gemessenen Niederschlags- und Temperaturdaten (Beobachtungsdaten) des Deutschen Wetterdienstes korreliert, wobei sowohl der Rutschungszeitpunkt als auch der Zeitraum vor einem Rutschereignis berücksichtigt wurde. Zur Abschätzung der zukünftigen Klimaentwicklung in den drei Regionen und der damit möglicherweise verbundenen Zunahme von Rutschungen wurden simulierte Klimaparameter aus dem regionalen Klimamodell REMO (Szenario A1B) verwendet. Dabei wurden die Parameter Niederschlag, Starkniederschlagsereignis und Frost ausgewählt, die sich bereits bei der Analyse mittels der Beobachtungsdaten als rutschungsrelevant herausgestellt haben. Es erfolgte eine Korrelation der Beobachtungsdaten mit den Klimamodelldaten für heutiges Klima (Kontrolllauf). Mittels des Vergleiches der Kontrolllaufdaten mit den entsprechenden Klimamodelldaten für zukünftiges Klima (Szenariolauf) wurde eine erste Trendbetrachtung der zukünftigen Klimaentwicklung innerhalb der drei Untersuchungsgebiete vorgenommen. In allen drei Untersuchungsgebieten ist der Trend in Bezug auf die Klimaänderung gleich, allerdings ist die Varianz bei den einzelnen Klimaparametern unterschiedlich. Die Sommerhalbjahre sind zum einen durch die generelle Abnahme der Niederschlagsmenge und zum anderen durch die Zunahme von Starkniederschlagsereignissen gekennzeichnet. In den Winterhalbjahren werden die Niederschlagsmenge und vor allem die Starkniederschlagsereignisse zunehmen. Hinzu kommt die deutliche Abnahme sowohl der einzelnen Frosttage als auch der Frostperioden. Diese klimatische Entwicklung wird sich auf die Eintrittswahrscheinlichkeit und das Schadensausmaß von Rutschungen dahingehend auswirken, dass bei Lockergesteinsböschungen mit einer Zunahme von oberflächennahen Rutschungen, Schlamm- und Schuttströmen im Sommerhalbjahr und einem Anstieg des Rutschungsrisikos gegen Ende des Winterhalbjahres zu rechnen ist. Bei Festgesteinsböschungen werden zunehmende Verwitterungs- und Erosionsprozesse zu einer erhöhten Rutschungshäufigkeit führen. Da sich klimatische Veränderungen regional zeitlich verzögert einstellen werden, wurde eine empirisch-statistische Einschätzung und eine Ausweisung regionaler Gefährdungsbereiche in Hinblick auf zeitabhängige Eintrittswahrscheinlichkeiten von Rutschungen entlang des Bundesfernstraßennetzes vorgenommen. Dies erfolgte mittels eines graphischen klimatisch-ingenieurgeologischen Modellansatzes für jedes Fallbeispiel. Dabei wurden die Klimaparameter aus dem Klimamodell mit dem rutschungsrelevanten ingenieurgeologischen Parameter Böschungsneigung verschnitten und korreliert, was mit Hilfe des jeweiligen digitalen Geländemodells realisiert wurde. Zusätzlich wurden das digitale Bundesfernstraßennetz und ein digitales Punktekataster von Rutschereignissen in das Modell integriert. Für die Abschätzung des Gefährdungspotentials wurden die Daten aus der Kontrolllauf-Zeitperiode 1971-2000 mit den Daten der Szenariolauf-Zeitperiode 2011-2100 korreliert. Die entsprechenden prozentualen Abweichungen für jeden einzelnen Parameter wurden in Bezug auf ihre Relevanz für das Auslösen von Rutschungen zum einen jahreszeitlich und zum anderen über das Jahr betrachtet und bewertet, wobei auch die Gewichtung aus ingenieurgeologischer Sicht berücksichtigt wurde. Im Ergebnis ist in allen drei Modellgebieten tendenziell im Sommerhalbjahr zwischen 2011 und 2080 und im Winterhalbjahr ab der zweiten Jahrhunderthälfte mit einem erhöhten Rutschungsrisiko zu rechnen. Durch die Korrelation der Klimaparameter mit der Böschungsneigung kann das zukünftige Gefährdungspotential durch Rutschungen entlang des Bundesfernstraßennetzes in einem ersten Schritt zeitabhängig eingestuft und somit abgeschätzt werden. Durch die Weiterentwicklung des Modells könnte so eine bundesweite Risikokarte generiert werden.
Entwicklung eines methodischen Rahmenkonzepts für Verhaltensbeobachtung im fließenden Verkehr
(2012)
Vielfach soll durch Verkehrsbeobachtung die Entwicklung des Verkehrsverhaltens im Zeitverlauf aufgezeigt und/oder die Wirksamkeit von Verkehrssicherheitsmaßnahmen bewertet werden. Charakteristisch dabei ist, dass bislang für jedes Vorhaben ein eigenes Studiendesign entwickelt wird, obwohl sich die jeweiligen Forschungsfragen trotz ihrer inhaltlichen Vielfalt aus methodischer Sicht auf einige wenige Grundmuster von Aufgabenstellungen reduzieren lassen. Im vorliegenden Forschungsvorhaben geht es deshalb darum, für Erhebungen, bei denen das Verhalten von Verkehrsteilnehmern im fließenden Verkehr beobachtet wird, ein möglichst allgemein anwendbares Design zu entwickeln. Ziel des vorliegenden Projektes ist es somit auch, das Spektrum der Methodik von Verhaltensbeobachtungen im fließenden Verkehr darzustellen sowie auf Probleme und Randbedingungen aufmerksam zu machen. Damit soll all denjenigen eine Hilfestellung gegeben werden, die beabsichtigen, solche Studien durchzuführen. In Kapitel 2 des Berichts werden zunächst einige nationale und internationale Projektbeispiele für Verhaltensbeobachtungen im fließenden Verkehr vorgestellt, auf deren Basis dann das hier in Rede stehende methodische Rahmenkonzept entwickelt wird. Kapitel 3 enthält eine Einordnung der Erhebungsmethode Verhaltensbeobachtung in den konzeptuellen Rahmen der Statistik und empirischen Sozialforschung. Im 4. Kapitel werden statistische Kennzahlen des Verkehrsverhaltens, die aus Beobachtungen gewonnen werden können, systematisiert und zusammengestellt. Kapitel 5 beschäftigt sich mit für Verhaltensbeobachtungen adäquaten Stichprobendesigns, in Kapitel 6 sind die zugehörigen Formeln für die Hochrechnung und Genauigkeitsbeurteilung (Konfidenzintervalle) der Ergebnisse aufgeführt. Kapitel 7 enthält einige methodische Hinweise zu Möglichkeiten und Grenzen der Ziehung einer Zufallsstichprobe für Verhaltensbeobachtungen, in Kapitel 8 wird der Prozess einer Verhaltensbeobachtung unter erhebungspraktischen Gesichtspunkten - basierend auf dem entwickelten Rahmenkonzept - beleuchtet. Vor der Zusammenfassung und den Empfehlungen (Kap. 10) wird in Kapitel 9 noch ein Vergleich des hier entwickelten methodischen Rahmenkonzepts mit der Vorgehensweise bei den aktuellen Erhebungen der BASt zum Schutzverhalten angestellt. In den Schlussbericht sind auch die Ergebnisse eines Workshops eingeflossen, der im Rahmen dieses Projekts am 18.01.2010 in Bergisch Gladbach durchgeführt wurde.
Auf Brücken, insbesondere auf Stahlbrücken, bildet sich im Winter gegenüber den anderen Streckenabschnitten oft vorzeitig Glätte. Dadurch kann der Straßenverkehr in erheblichem Maße gefährdet werden. Es gibt verschiedene Möglichkeiten das vorzeitige Auftreten von Glätte zu verhindern. Die derzeit gebräuchlichsten Methoden sind die Brücken vorzeitig zu streuen oder automatische Taumittelsprühanlagen zu installieren. In dem vorliegenden Projekt wurde eine weitere, innovative Methode untersucht, nämlich die Temperierung der Fahrbahn mit Hilfe von Geothermie. Dazu wurden Simulationsreihen und damit zusammenhängende praxisnahe Messungen durchgeführt. Die Messungen wurden auf einer eigens hierfür hergestellten Testbrücke aus Stahl-Brückenmodulen sowie in weiteren Testfeldern auf bestehenden Brücken vorgenommen. Der Bericht stellt wichtige Informationen und Ergebnisse zur Verfügung, die notwendig sind, um ein Brücken-Projekt mit Fahrbahn-Temperierung zu planen und umzusetzen. Dabei werden die Aspekte - konstruktive Gestaltung, - thermische Eigenschaften, - mechanische Festigkeit, - Regelstrategien und " Wirtschaftlichkeit eines solchen Systems betrachtet. Weiterhin enthält der Bericht Beispiele, welche Varianten hinsichtlich des geothermischen Systems möglich sind, und gibt Eckdaten zu deren Dimensionierung an. Nach den hier vorliegenden Ergebnissen ist die Realisierung eines Fahrbahn-Temperierungs-Systems mittels Geothermie für Stahlbrücken möglich. Die thermische Leistung ist für den angestrebten Zweck ausreichend. Hinsichtlich der mechanischen Eigenschaften konnten zumindest keine kurzfristig erkennbaren Beeinträchtigungen festgestellt werden, wobei hier weiterer Forschungsbedarf besteht. Damit bietet die geothermische Fahrbahntemperierung die Möglichkeit, umweltschonend zur Vermeidung von frühzeitiger Glättebildung auf Straßenbrücken beizutragen.
Als Ergebnis des Forschungsvorhabens wurde ein Simulationsverfahren für die Ermittlung von Streckenkapazitäten auf Bundesautobahnen (BAB) bei winterlichen Straßenzuständen erarbeitet. Der Berechnungsansatz wurde auf eine robuste Verfahrensweise ausgelegt, um die Auswirkungen von Ungenauigkeiten und Fehlern der Eingangsgrößen zu minimieren. Das Verfahren orientiert sich an den technischen Rahmenbedingungen wie z.B. die Eigenschaften der derzeit verfügbaren Daten der Wetterprognose und der Umfelddatenerfassung. Zugleich werden die Anforderungen an die Nutzung der Prognoseergebnisse berücksichtigt. Ausgehend von einer Grundkapazität der Streckenabschnitte in Anlehnung an das Handbuch für die Bemessung von Straßenverkehrsanlagen (HBS) wurden Abschlagsfaktoren für die jeweils vorherrschende Witterungssituation ermittelt. Diese Witterungseigenschaften wurden zuvor anhand charakteristischer Eingangsgrößen zusammengefasst und als Wetterklassen definiert. Das nachgeschaltete Prognoseverfahren ist als zweistufiger Ansatz mit einer Planungsprognose für die vorausschauende Disposition sowie einer Kurzfristdarstellung für die operative Durchführung der Verkehrsmanagements, des Straßenbetriebsdienstes und des Arbeitsstellenmanagements aufgebaut. Es basiert auf einem Warteschlangenmodell. Die Ergebnisse zeigen mögliche Stauereignisse auf und können als Entscheidungshilfe verwendet werden. Beide Komponenten setzen auf den gleichen grundsätzlichen Vorgehensweisen für die Prognose auf. Es bleibt offensichtlich, dass die Güte der Wetterprognose für die korrekte Auswahl der Wetterklasse entscheidend ist. Die Zuverlässigkeit der nachfolgend aufgesetzten Prognose des Verkehrsablaufs korreliert daher unmittelbar mit der Qualität der Eingangsgröße Wetterprognose. Aus diesem Grund ist der Bereitstellung hochwertiger und kleinräumiger Wetterprognosen für den Straßenbetriebsdienst die erforderliche Aufmerksamkeit zu widmen. Die im Forschungsvorhaben entwickelte modelltechnische Abbildung der witterungsbedingten Kapazitätseinschränkung und ihrer Auswirkungen auf den Verkehrsablauf durch zwei Risikostufen in Form einer "Warnung" und eines "Alarms" hat sich in der Evaluierung bewährt. Dabei ist die betriebsnahe Interpretation der Prognoseergebnisse möglich. Das Verfahren mit den Vorhersagen des Verkehrszustands Eingangsgrößen beweist, dass sie als Auslösekriterien für Maßnahmen des Verkehrsmanagements genutzt werden können.
The paper presents a methodology for the benefit estimation of several secondary safety systems for pedestrians, using the exceptional data depth of GIDAS. A total of 667 frontal pedestrian accidents up to 40kph and more than 500 AIS2+ injuries have been considered. In addition to the severity, affected body region, exact impact point on the vehicle, and the causing part of every injury, the related Euro NCAP test zone was determined. One results of the study is a detailed impact distribution for AIS2+ injuries across the vehicle front. It can be stated, how often a test zone or vehicle part is hit by pedestrians in frontal accidents and which role the ground impact plays. Basing on that, different secondary safety measures can be evaluated by an injury shift method concerning their real world effectiveness. As an example, measures concerning the Euro NCAP pedestrian rating tests have been evaluated. It was analysed which Euro NCAP test zones are the most effective ones. In addition, real test results have been evaluated. Using the presented methodology, other secondary safety like the active bonnet (pop-up bonnet) or a pedestrian airbag measures can be evaluated.
Tree impacts are still one of the most important focal points of road deaths in Germany. For the year 2008, the latest figures in the national statistics show a share of 28% of road users killed in crashes with trees alongside a road amongst all crashes on rural roads (except the Autobahn). The official German statistics show the attribute "impact on a tree" since 1995. For this first reported year, the share of road users killed in such crashes was 30%. During the last 14 years, fatal accidents with road users killed on rural roads (except the Autobahn) after impacts on a tree declined by 60% from 1,737 (year 1995) to 696 (year 2008). But this is more or less in line with the general evolution of vehicle and traffic safety in Germany. For Germany as a whole the accident statistics do not show a reduction for "treer crashes" which is clearly more than the average for all accidents. But, as shown with the paper, there are different evolutions in the several German States. In public awareness the topic "tree impacts" is mostly associated with the situation in Germany after the reunification. At that time a lot of road users were killed on the avenues in the so called "new countries". The fact that "tree impacts" are still a big share within the figure of killed road users seems to be little-known. Using updated information coming from the official statistics and in-depth-studies, accident researchers can identify a big potential for further improvements of traffic safety on the associated district roads, state roads and federal highways. There is still a need to analyse more details of the accident occurrence with impacts on trees to generate new and updated findings on the current limits and potentials of measures to improve vehicle and traffic safety. To make further efforts in reducing the figures of victims of "tree impacts" the intensification of well-known conventional solutions " for example implementation of guard rails and reduction of speed - is an option. Measures related to vehicle safety technology especially in the field of primary (active) safety will have additional benefit within the physically imposed limits. With this background it can be seen that the subject "tree impacts" should be analysed with a holistic approach taking into account the entire system of driver, vehicle, road, the environment and a social consensus as well.
Looking at the total of sum of fatal car accidents the number of single-vehicle accidents and particularly run-offroad (ROR) accidents are most frequent. In Austria on the Autobahn ROR accidents amounts to almost 45% of all fatal accidents, i.e. nearly every second fatal accident is caused by ROR accidents and interaction with infrastructure. Approximately 43 people were killed on Autobahns in ROR accidents with passenger cars. One possibility of protection against impacts with infrastructure is the use of guardrails. However, the initial element identified as a turned down terminal could become a dangerous impact object. These turned down terminals may lead a vehicle to roll over or the car "takes-off" when impacting the turned down guardrail. In many cases it is reported that the vehicle is jumping into road side objects such as traffic sign poles or overpasses. On average, nine people are killed in such accidents every year in Austria.
Small overlap frontal crashes are defined by a damage pattern with most of the vehicle deformation concentrated outboard of the main longitudinal structures. These crashes are prominent among frontal crashes resulting in serious and fatal injuries, even among vehicles that perform well in regulatory and consumer information crash tests. One of the critical aspects of understanding these crashes is knowing the crash speeds that cause the types of damage associated with serious injuries. Laboratory crash tests were conducted using 12 vehicles in three small overlap test conditions: pole, vehicle-to-vehicle collinear, and vehicle-to-vehicle oblique (15-degree striking angle). Field reconstruction techniques were used to estimate the delta V for each vehicle, and these results were compared with actual delta V values based on vehicle accelerometer data. Estimated delta Vs were 50% lower than actual values. Velocity change estimates for small overlap frontal crashes in databases such as NASS-CDS significantly underestimate actual values.
Bone fracture patterns could be crucial in reconstructing the nature of loading, especially in the lower limb and upper limb kinematics in vehicle-pedestrian crashes. In addition, use of FE bone models can be a handy tool to predict vehicle impact velocity and the impact direction. The point of fracture initiation in bone loading has been predicted quite accurately earlier. A methodology that predicts bone crack initiation and its propagation pattern for the six known loading directions using a single material and failure model is presented.
Pedestrian and cyclist are the most vulnerable road users in traffic crashes. One important aspect of this study was the comparable analysis of the exact impact configuration and the resulting injury patterns of pedestrians and cyclists in view of epidemiology. The secondary aim was assessment of head injury risks and kinematics of adult pedestrian and cyclists in primary and secondary impacts and to correlate the injuries related to physical parameters like HIC value, 3ms linear acceleration, and discuss the technical parameter with injuries observed in real-world accidents based documented real accidents of GIDAS and explains the head injuries by simulated load and impact conditions based on PC-Crash and MADYMO. A subsample of n=402 pedestrians and n=940 bicyclists from GIDAS database, Germany was used for preselection, from which 22 pedestrian and 18 cyclist accidents were selected for reconstruction by initially using PC-Crash to calculate impact conditions, such as vehicle impact velocity, vehicle kinematic sequence and throw out distance. The impact conditions then were employed to identify the initial conditions in simulation of MADYMO reconstruction. The results show that cyclists always suffer lower injury outcomes for the same accident severity. Differences in HIC, head relative impact velocity, 3ms linear contiguous acceleration, maximum angular velocity and acceleration, contact force, throwing distance and head contact timing are shown. The differences of landing conditions in secondary impacts of pedestrians and cyclists are also identified. Injury risk curves were generated by logistic regression model for each predicting physical parameters.
The accident research of Hanover and (from 1999 on) Dresden registered 736 leg injuries (AIS ≥ 2) from 1983 to March 2007. 174 of these injuries (23.6 %) were fractures or dislocations of foot and ankle. 149 feet of 141 front seat car occupants in 140 cars were affected. Of these 117 were drivers, 24 were front seat passengers. The mean age of occupants was 38.5 -± 16.8 years. Ankle fractures were the most frequent injury (n = 82; 80 malleolar fractures, 2 pilon fractures). 34 fractures and dislocations affected the hindfoot (5 talus and 26 calcaneal fractures, 2 subtalar dislocations and 1 subtotal amputation) , 16 to midfoot (4 navicular fractures, 5 cuboid fractures, 3 fractures of cuneiformia, 2 dislocations of chopart joint, 1 subtotal amputation, and one severe decollement) and 39 the forefoot (metatarsal fractures). Open fractures were seldom seen (2 malleolar fractures, 1 metatarsal fracture). Both feet were injured in 10 cases. 33 occupants (23.4 %) were polytaumatic had a polytrauma, 17 of them died. 81 percent of the occupants were belted. The cars were divided in pre EuroNCAP (year of manufacture 1997 and older) and post EuroNCAP cars (year of manufacture 1998 and newer). Most of the foot injuries were seen in pre EuroNCAP cars. Most of the occupants sat in compact cars (40 drivers and 9 front seat passengers) and large family cars (27 drivers and 7 co-drivers). 49 of 140 accidents occurred on country roads, 26 on main roads and 13 on motorways. The crash direction was mostly frontal. Generally were found no differences of delta v- and EES-level between the injured foot regions, but divided into pre- and post-EuroNCAP cars there was a tendency to higher delta v- and EES-levels in newer cars. The frequency of foot injuries increased linearly with increasing delta v-level; but above delta v-level of 55 km/h the linear increase only was seen in pre-EuroNCAP cars, post-EuroNCAP cars showed no further increase of injuries. The footwell intrusion showed no difference between the injured foot regions but pre-EuroNCAP cars had a tendency to higher footwell intrusion. There were no differences in footwell intrusion between the car types. Only 29 of 174 fractures or dislocations of foot were seen in post-EuroNCAP cars, the predominate number of these injuries (n = 145) were noticed in pre-EuroNCAP cars. A lower probability of long-term impairment was found in post-EuroNCAP cars for equal delta v levels, using the AIS2008 associated Functional Capacity Index (FCI) for the foot region.
Unfortunately, there has been a high number of accident fatalities reported in the Czech Republic in recent years. There are many causes which have led to a growth in the number of road traffic accidents. Since 1990, traffic density has demonstrated an upward moving tendency, daily traffic-jams are on the increase in many cities and traffic capacity on roads and streets is not able to satisfy this increasing density. Moreover, many road users lack experience in terms of driving modern cars. The National Accident Study of the Czech Republic is based on the assumption that the year 2010 is considered as a pilot project with the testing operation of collecting and evaluating data from traffic accidents. From the beginning of 2011, a fully-functional structure of the Traffic Accident Research will be created and solid data generated. Based on this assumption, we hope to begin meaningful cooperation with foreign countries.
Recent findings from real-world accident data have shown that fatality risks for pedestrians are substantially lower than generally reported in the traffic safety literature. One of the keys to this insight has been the large and random sample of car-to-pedestrian crashes available in the German In-Depth Accident Study (GIDAS). Another key factor has been the proper use of weight factors in order to adjust for outcome-based sampling bias in the accident data. However, a third factor, a priori of unknown importance, has not yet been properly analysed. This is the influence of errors in impact speed estimation. In this study, we derived a statistical model of the impact speed errors for pedestrian accidents present in the GIDAS database. The error model was then applied to investigate the effect of the estimation error on the pedestrian fatality risk as a function of car impact speed. To this end, we applied a method known as the SIMulation-EXtrapolation (SIMEX) method. It was found that the risk curve is fairly tolerant to some amount of random measurement error, but that it does become flattened. It is therefore important that the accident investigations and reconstructions are of high quality to assure that systematic errors are minimised and that the random errors are under control.
A national initiative from the vehicle manufacturers, safety system suppliers, the road administration and universities in Sweden took off in 2007. The aim was to develop a national investigation network and a methodology focusing on all phases of a crash (pre-crash, in-crash and post-crash) as well as all parts of the road transport system (road user, vehicle and road environment). The initiative is formally run as a project with the acronym INTACT (Investigation Network and Accident Collection Techniques). It was a three year pilot with the aim to develop methodologies for an extended national crash investigation activity. During the first year the INTACT partners agreed on the aim for the investigation and methods for retrieving the data were developed. During the second and third year the methodology was tested in real-world investigations and further refinement was made. The paper describes the methodology developed to obtain high qualitative in-depth road crash data.
Ziel des Forschungsvorhabens war die Entwicklung eines Verfahrens zur Quantifizierung von Verkehrsverlagerungen durch Arbeitsstellen im Bereich der Bundesautobahnen. Eine wesentliche Grundlage der Untersuchung bildeten Datenanalysen der rund 1.350 automatischen Dauerzählstellen im Bundesfernstraßennetz. Die Ermittlung möglicher Verlagerungseffekte wurde zusätzlich an ausgewählten Beispielen mit Hilfe von makroskopischen Verkehrsmodellen analysiert. Zusammenfassend zeigten die Analysen, dass während der Arbeitsstellenzeit Verlagerungseffekte fast ausschließlich in den Spitzenstunden auftreten. In diesen Stunden erreichten die Änderungen der Belastung auf den Autobahnabschnitten eine Größenordnung von 2% bis 5%. Über den Tag gesehen ergibt sich eine mittlere Verlagerung unter 1%. Im Rahmen der durchgeführten Regressions- und Clusteranalysen konnten keine Einflussfaktoren oder Merkmalskombinationen ermittelt werden, die die Ursachen für die durch Arbeitsstellen bedingten Belastungsänderungen mit einer ausreichenden Zuverlässigkeit erklären konnten. Lediglich eine Differenzierung der Arbeitsstellenrichtungen nach unterschiedlichen Typen von Verkehrsführungen führte zu dem Ergebnis, dass nennenswerte Verlagerungen lediglich für die Arbeitsstellensituationen auftreten, bei denen eine Reduzierung der Fahrstreifenanzahl von 2 auf 1 oder von 3 auf 2 Fahrstreifen erfolgte. Aufgrund der Erkenntnisse, dass Arbeitsstellen bedingte Verkehrsverlagerungen auch bei hohen Streckenbelastungen deutlich niedriger sind als bisher vielfach angenommen, die Verkehrsverlagerungen sich auf die hochbelasteten Stundenbereiche beschraenken, die Verlagerungen mit der Dauer der Arbeitsstellenlaufzeit abklingen und keine funktionalen Abhängigkeiten mit hohem Bestimmtheitsmaß ermittelt werden konnten, ist die Berücksichtigung Arbeitsstellen bedingter Verkehrsverlagerungen auf Autobahnen im Rahmen von gesamtwirtschaftlichen Bewertungen vermutlich nur in sehr geringem Umfang ergebnisrelevant.
In India, heavy truck crashes on national highways account for a number of fatalities. But due to lack of in-depth crash data, detailed analysis is not possible to determine injury mechanisms, and to identify infrastructure, vehicle and human factors affecting these crashes. Over the past two years, researchers in India have established a crash investigation network, with the co-operation of the police and hospitals, to conduct crash investigations and in-depth crash data collection on national highways in the state of Tamil Nadu. This pioneering effort has resulted in the development of a heavy truck crash investigation methodology, the outcome of which is scientific and reliable crash data that has been able to provide good insight into truck crashes and their causes. This paper explains the need for truck crash investigations, the methodology, conclusions of the data analyzed up to date, and the need to focus on truck driver working conditions.
Aim of the study was to evaluate the protective effect of bicycle helmets particularly considering injuries to the head and to the face. Accidents with the participation of bicyclists which occurred from 2000 to 2007 were chosen from GIDAS. We observed that injuries to the head and face were more severe in the group of non-helmeted riders. There seems to be no significant difference in injuries with AIS 3-6. Altogether 26 cyclists were killed. 2 of them wore a helmet (1% of helmeted cyclists), 24 did not (1% of non-helmeted cyclists). Only one killed rider (without helmet) did not suffer from polytrauma (only head injuries recorded). The findings seem to support the thesis of a preventive effect of the bicycle helmet, however the two groups are different in their characteristics related to riding speed. Necessarily we need a multivariate model to evaluate the effect of helmets.
Providing effective occupant protection in rollover crashes requires supplying the occupant with a restraint system proven effective in the dynamic rollover accident mode. Preventing ejection and providing restraint sufficient to prevent potentially injurious contacts with both interior and exterior vehicle components is paramount for effective rollover occupant protection. Research has shown that the injury potential can be decreased by closely coupling the occupant to the seat. This paper focuses on the effect of restraint system slack and its relationship to occupant excursion and ejection potential during rollover. Various restraint system configurations are evaluated in rollover-type test environments. A review of prior research is presented prior to presenting new quasi-static vehicle inversion studies conducted with live surrogate occupants. Additionally, dynamic rollover testing utilizing anthropometric test devices (ATDs) is presented. The influence of belt looseness and effects of various restraint designs on the belted occupants' injury potential are discussed.
Mechanical properties of tibial bone at compressive strain rates of 50-200 s-1 are obtained through Split Hopkinson pressure bar. Cylindrical specimens of 12-15 mm diameter and 2-5 mm thickness were used. The Young- moduli are calculated from linear portion of stress-strain curves. For both cortical and cancellous part of the bones, the Young- modulus was found to increase with the increasing strain rates. Also for both cancellous and cortical bones the Young- modulus increases consistently with increase in densities.
Among European Countries, Spain first issued a Standard, UNE 135900:2005, further updated in 2008, that deals with homologation and effectiveness evaluation of road restraint systems components designed to reduce harm for bikers impacting on them. An in depth analysis and critical review of this standard is reported in this paper. Beside a close examination of the standard requirements, numerical models of the crash test stated by the standard have been set up and simulated to study the effects of slight speed and approach angle variations on test results, remaining within tolerance gaps allowed by the standard. Model were validated against experimental data. Together with the expected increasing severity of the impact according with speed, a strong influence of approach angle on injury parameters was found. Possible improvements to the norm, in order to make it more robust, are suggested.
The need of passive safety devices, able to reduce the accidents and the severity of injuries suffered by motorcyclist, distinctly arises from data on accident statistics. In this paper, the effectiveness of an airbag device fitted in the biker- garments has been verified through various numerical simulations. Two simple test conditions were defined, in order to investigate the performance of the device both for back and front impacts, and simulated at various impact speeds. With the aim of providing more information about the actual capability of the airbag to reduce the severity of the injuries, one of accident scenario described by ISO 13232:2005 has been also investigated, checking the real effectiveness of the airbag strap-based firing system too. Confrontation of injury indexes resulting from simulation with and without airbag made possible a realistic evaluation of the harm reduction induced by the airbag presence.
Although the statistics show a decreasing rate of child injuries and fatalities in German road accidents more efforts can be made to protect children in cars e.g. by developing appropriate child restraint systems. An important part in of this work can be achieved with the help of crash tests using child dummies. However these crash tests cannot completely reflect the situation of real world crashes as factors like children moving out of the optimal position or children incorrectly fastened by their parents are difficult to predict. Therefore this study gives an overview over the current accident and injury situation of child occupants in cars in German road accidents.
Accidents involving two wheels vehicles represent one of the more important types of accidents in Europe. These accidents are usually not easy to reconstruct specially for the analysis of the injuries and its correlation with accident dynamics and evidences. Different methodologies are applied in this work for the reconstruction of two wheeler accidents, especially accident involving motorcycles. From the typologies of road evidences like skid marks, to the use of Pc-Crash and the use of Madymo models, different reconstruction of real accidents are presented. One of the questions that sometimes arise for legal purposes when some type of head injuries arise is if the occupant was wearing or not a helmet. The correlation of head injuries with the use of the helmet is a very important issue, therefore an important legal aspect. One of the key questions for the reconstructions that is difficult to analyze, is if the vehicle occupant, was or not, wearing the helmet. Based on the previously collected information, a generic model of a helmet was developed on CAD 3D, followed by its conversion into finite elements, all in order to perform impact tests using the Madymo software that would help improve the helmet- safety, but that also can be used as a tool in accident reconstruction.
In order to enable foreseeing or comparing the benefit of safety systems or driver assistance systems in Germany, in the United States and in Japan, the traffic accident databases in those three countries are examined. The variables used are culpable party, collision partner, accident type, and injury level and the method to re-classify the databases for comparison are proposed. The result indicates that single passenger car fatality is the most frequent in Germany and in the United States, while passenger car vs. pedestrian is the most frequent fatality scenario in Japan. When the casualty by fatality ratio is focused, the greatest difference is observed in rear-end collisions. The ratio of slight injuries in Japan yields about eighteen times as many as those in Germany, and about eight times as many as those in the United States.
Causation patterns and data collection blind spots for fatal intersection accidents in Norway
(2010)
Norwegian fatal intersection accidents from the years 2005-2007 were analysed to identify any causation patterns among their underlying contributing factors, and also to evaluate whether the data collection and documentation procedures used by the Norwegian in-depth investigation teams produces the information necessary to perform causation pattern analysis. A total of 28 fatal accidents were analysed. Details on crash contributing factors for each driver in each crash were first coded using the Driving Reliability and Error Analysis Method (DREAM), and then aggregated based on whether the driver was going straight or turning. Analysis results indicate that turning drivers to a large extent are faced with perception difficulties and unexpected behaviour from the primary conflict vehicle, while at the same time trying to negotiate a demanding traffic situation. Drivers going straight on the other hand have less perception difficulties. Instead, their main problem is that they largely expect turning drivers to yield. When this assumption is violated, they are either slow to react or do not react at all. Contributing factors often pointed to in literature, e.g. high speed, drugs and/or alcohol and inadequate driver training, played a role in 12 of 28 accidents. While this confirms their prevalence, it also indicates that most drivers end up in these situations due to combinations of less auspicious contributing factors. In terms of data collection and documentation, information on blunt end factors (those more distant in time/space, yet important for the development of events) was more limited than information on sharp end factors (those close in time/space to the crash). A possible explanation is that analysts may view some blunt end factors as event circumstances rather than contributing factors in themselves, and therefore do not report them. There was also an asymmetry in terms of reported obstructions to view due to signposts and vegetation. While frequently reported as contributing for turning drivers, they were rarely reported as contributing for their counterparts in the same accidents. This probably reflects an involuntary focus of the analyst on identifying contributing factors for the driver legally held liable, while less attention is paid to the driver judged not at fault. Since who to blame often is irrelevant from a countermeasure development point of view, this underlying investigator mindset needs addressing to avoid future bias in crash investigation reports.
The purpose of this study was to analyse the actual injury situation of bicyclists regarding accidents involving more than one bicyclist. Bicyclists were included in a medical and technical analysis to create a basis for preventive measures and discovered repeating accident patterns and circumstances such as daytime, environment, helmet use rate. Technical and medical data were collected at the scene, shortly after accident. The population was compared focusing on bicycle versus bicycle accidents. Technical analysis included speed at crash, type of collision, impact angle, environment, used lane and relative velocity. Medical analysis included injury pattern and severity (AIS, ISS). Included were 578 injured bicyclists in 289 accidents from years 1999 to 2008, 61 percent were male (n=350) and 39 percent female (n=228). Sixty-seven percent ranged between 18 to 64 years of age, twelve percent each between 13 to 17 years of age and older than 65 years, eight percent between 6 to 12 years and one percent between 2 to 5 years.. Crashes took place in urban areas in 92 percent, in rural areas in 8 percent. Weather conditions were dry lanes in 97 percent and wet conditions in 3 percent. Eighty-three percent of all accidents happened during daytime, ten percent during night, and seven percent during dawn. The helmet use rate was only 7,5 percent in all involved bicyclists. The mean Maximum Abbreviated injury scale, Injury severity score was 1,31. Bicyclists are still minimally- or unprotected road users. The helmet use rate is unsatisfactorily low. The incidence of bicycle to bicycle crashes is high. Most of these accidents take place in urban areas. The level and pattern of injuries is moderate. Most of the more severe injuries occur to the head and could have been avoided by frequent helmet use.
An increased use of bicycles comes along with an increased number of bicycle accidents. Bicycle accidents are more frequent than recorded by the police. To evaluate the real number of bicycle accidents during 12 months in Münster, Germany, injuries were collected by the Police and in each emergency unit anonymously. 2,153 patients had to be treated in a hospital, nearly triple the number of accidents that were registered by the police. Beside fractures of the upper extremities with major surgery, traumatic brain injuries were the leading cause for hospital admission. Bicycle helmet use can reduce traumatic brain injuries and the related number of deaths and hospital admissions. Laws on bicycle helmet might decrease the use of bicycles and therefore the reduction of positive health benefits. Other methods of accident prevention may lead to positive effects as helmet legislation as well, while having no reduction in bicycle use.
Accident data shows that the vast majority of pedestrian accidents involve a passenger car. A refined method for estimating the potential effectiveness of a technology designed to support the car driver in mitigating or avoiding pedestrian accidents is presented. The basis of the benefit prediction method consists of accident scenario information for pedestrian-passenger car accidents from GIDAS, including vehicle and pedestrian velocities. These real world pedestrian accidents were first reconstructed and the system effectiveness was determined by comparing injury outcome with and without the functionality enabled for each accident. The predictions from Volvo Cars" general Benefit Estimation Model are refined by including the actual system algorithm and sensing models for a relevant car in the simulation environment. The feasibility of the method is proven by a case study on a authentic technology; the Auto Brake functionality in Collision Warning with Full Auto Brake and Pedestrian Detection (CWAB-PD). Assuming the system is adopted by all vehicles, the Case Study indicates a 24% reduction in pedestrian fatalities for crashes where the pedestrians were struck by the front of a passenger car.
The National Highways Development Project in India is aimed at upgrading over 12,000 km of national highways from 2-lane undivided roads to 4-lane divided roads. With nearly 40% of fatal crashes being reported on national highways, the effect of this project on road safety needs to be assessed. Researchers carried out on-site crash investigations and in-depth crash data collection for a period of 45 to 60 days on four 2-lane undivided highways and a 4-lane divided highway. Based on 76 crashes examined, researchers found a shift of crash pattern from head-on collisions on undivided 2- lane highways to front-rear collisions on divided 4-lane highways. This paper presents the methodology, analysis of crashes examined, and the critical safety problems identified for greater consideration in future highway development projects. This paper also highlights the need and significance of in-depth crash investigations to understand local traffic conditions and problems in India.
Accidents with vulnerable road users require special attention within the road safety work because these accidents are often accompanied with severe injuries. Thus In 2006 at least 6200 Powered Two Wheeler (PTW) riders were killed in road crashes in the EU 25 representing 16% of the total number of road deaths while accounting for only 2% of the total kilometers driven. For the prevention of accidents with VRU above all the knowledge of the causes of the accidents is of special importance. This study is based on the methodology of the German In-Depth Accident Study GIDAS. Within GIDAS extensive data on various fields of accidentology are collected on-scene from road traffic accidents with injuries in the Hannover and Dresden area. Using a well defined sample plan the collected data is highly representative to the whole German situation (Brühning et al, Otte et al). The need of in-depth accident causation data in accident research led to the development of a special tool for the collection of such data called ACASS (Accident Causation Analysis with Seven Steps), which was implemented in the GIDAS methodology in 2008 and described by Otte in 2009.
An eCall device has been mounted on some vehicles in France since 2003. It is an integrated car radio/GSM/GPS system that can be used with a SIM card. When an accident occurs, a call can be sent manually or automatically made to a telephone call centre. Knowing the geographic location, the vehicle identity and the possibility of a direct communication with the people involved enables the nearest emergency services to be called out. In this context, the LAB / CEESAR have set up a study aimed at evaluating the effectiveness of this system. The purpose of this paper is to detail the E-call system evaluation method of effectiveness used and give a global synthesis of the results.
Females sustain Cervical Spine Distortion injury (CSD) more often than males. Most work dealing with the biomechanics background (e.g. injury mechanism/criteria) as well as the application in seat design/testing, focuses on the occupant model of an average male. Therefore the EU-Project ADSEAT (Adaptive Seat to Reduce Neck Injuries for Female and Male Occupants) is aimed at adding a female model for gender balanced research of CSD and improving seat design. An extensive literature review, searching for risk factors and injury criteria for males and females, was accompanied by the evaluation of different databases containing CSD cases. The database evaluations suggests that an anthropometry quite close to the 50%ile female anthropometry as known from crash test dummy design is appropriate. The results presented here form the basis for the future development of a computational female model and the improvement of seat design for better protection of both males and females in the frame of the ADSEAT-Project.
Adverse weather could impair the performance of many important parts in road transportation. In a tropical country, the threats posed by the weather phenomenon can be viewed from a different perspective as the situation may not be as extreme as snow-related problems or excessive temperature in other countries. Specifically in Malaysia, the situation may be underestimated due to several reasons such as the deficiencies in accident reporting and lack of research work. This background research has looked into various publications as well as related data to explain the need of more comprehensive research in the future.
Although ATV accidents account for numerous deaths in the US and Australia, the role in traffic accidents and hospital admissions in Germany is unknown. At a level I trauma centre, hospital and crash charts were analysed for medical and technical parameters of ATV accidents. ATV drivers were 0.1% of emergency trauma patients. The mean total hospital stayrnwas 15 days; there were 1.5 stays per patients with 2.0 surgical procedures needed. One patient died, only two recovered fully. 14 cases of ATV accidents out of 18990 (0.1%) were documented within 10 years. The mean impact velocity was 35 km/h. Car collisions were predominant. The upper extremity was the predominant injured region (AIS 0.7), Mean maximum AIS was 1.4. ATV accidents in Germany are rare but pose high risk for severe injuries. Possible reasons are low active and passive security, limited experience and risky driving behaviour. Preventive measures are discussed.rn
Die vorliegende Untersuchung gibt einen zusammenfassenden Überblick über die Leistungen des öffentlichen Rettungsdienstes in der Bundesrepublik Deutschland im Zeitraum 2008/09. Das Forschungsprojekt 87.012/2008 "Analyse des Leistungsniveaus im Rettungsdienst für die Jahre 2008 und 2009" erfasst und analysiert eine repraesentative Stichprobe von Einsatzdaten zur Beurteilung der Leistungsfähigkeit des öffentlichen Rettungsdienstes in der Bundesrepublik Deutschland. Die wesentlichsten Ergebnisse des Forschungsprojektes sind: " Bundesweit werden im öffentlichen Rettungsdienst im Zeitraum 2008/09 jährlich rund 11,4 Mio. Einsätze mit insgesamt 14,2 Mio. Einsatzfahrten durchgeführt. Die Einsatzrate beträgt rund 143 Einsätze pro 1.000 Einwohner und Jahr. " An einem mittleren Werktag gehen bundesweit rund 35.000 rettungsdienstliche Hilfeersuchen in den Rettungsleitstellen ein. Am Wochenende sinkt die Zahl der eingehenden Hilfeersuchen auf rund 26.000 an einem mittleren Samstag und auf rund 24.000 an einem mittleren Sonntag. " 49 % des Einsatzaufkommens werden vom Leitstellenpersonal als Notfall eingestuft, 51 % entfallen auf die Kategorie Krankentransport. " Praktisch die Hälfte aller Notfalleinsätze werden unter Hinzunahme eines Notarztes durchgeführt (Notarzteinsatz). Ein Drittel der Notfälle zu Verkehrsunfaellen (32 %) wird von einem Notarzt bedient. " Das Rendezvous-System hat sich mit einem Anteil von 99,1 % gegenüber dem Stationssystem bundesweit durchgesetzt. " Rund jeder 17. Notfalleinsatz gilt einem Verkehrsunfall, was bundesweit rund 336.000 Einsätzen entspricht. Die Verteilung der übrigen Einsatzanlässe bei Notfällen mit und ohne Notarztbeteiligung beträgt: Internistischer Notfall 46 %, Sonstiger Notfall (z. B. Verbrechen, Suizid, dringende Blut- und Organtransporte) 37 %, Sonstiger Unfall (z.B. Haus-, Schul- und Sportunfall) 11 % und Arbeitsunfall unter 1 %. " Die Verteilung der Rettungsmitteltypen am bundesweiten Einsatzfahrtaufkommen im Zeitraum 2008/09 betraegt: RTW 52 %, KTW 29 %, NEF 18 %, NAW und RTH/ITH unter 1 %. " Beim Einsatzfahrtaufkommen werden rund die Haelfte der Einsatzfahrten mit Sonderrechten auf Anfahrt durchgeführt. Dies entspricht bundesweit jährlich 7,2 Mio. Einsatzfahrten unter Sonderrechten auf Anfahrt. " Das Einsatzfahrtaufkommen weist im Bundesgebiet 2008/09 einen Fehlfahrtanteil von unter 6 % auf. Bundesweit sind dies jährlich rund 808.000 Fehlfahrten. " Die Dispositions- und Alarmierungszeit bei Einsatzfahrten mit Sonderrechten auf Anfahrt beträgt im Mittel 2,1 Minuten. Bei Einsatzfahrten ohne Sonderrechte auf Anfahrt liegt die Dispositionsund Alarmierungszeit im Mittel bei 14,3 Minuten. " Bei Einsätzen mit Sonderrechten auf Anfahrt errechnet sich nach dem zuerst eingetroffenen Rettungsmittel am Einsatzort eine mittlere Hilfsfrist von 8,7 Minuten, wobei 95 % der Notfälle innerhalb von 16,7 Minuten mit einem Rettungsmittel bedient werden. " Die mittlere Hilfsfrist zu Verkehrsunfällen beträgt an Straßen innerorts am Tag 8,8 Minuten und in der Nacht 9,4 Minuten, an Straßen außerorts am Tag 10,4 Minuten und in der Nacht 10,9 Minuten. " Die Unterscheidung der Einsatzzeit nach Notfällen und Krankentransporten unter zwei Stunden ergibt eine mittlere Einsatzzeit von 51 Minuten für Einsatzfahrten mit Sonderrechten auf Anfahrt und 53 Minuten für Einsatzfahrten ohne Sonderrechte auf Anfahrt. " Die Transportzeit bei Einsatzfahrten mit Sonderrechten auf Anfahrt beträgt im Mittel 12,3 Minuten. Bei Einsatzfahrten ohne Sonderrechte auf Anfahrt liegt die Transportzeit im Mittel bei 16,1 Minuten. " Die Verweilzeit am Transportziel/Wiederherstellungszeit bei Einsatzfahrten mit Sonderrechten auf Anfahrt beträgt im Mittel 20,1 Minuten, während bei Einsatzfahrten ohne Sonderrechte auf Anfahrt der Vergleichswert im Mittel bei 15,9 Minuten liegt. " Die weiteren Ergebnisse der Pilotstudie zur Machbarkeit einer Datenerhebung und -analyse über die Ermittlung der Verletzungsschwere bei Verkehrsunfallopfern zeigen, dass die Analyse mittels Daten sowohl zur Rückmeldezahl in Hessen als auch mit Hilfe von DIVI-Notarztprotokollen möglich ist. Dabei ist eine Klassifikation mit Hilfe von Geodaten EDV-gestuetzt umsetzbar, um eine vergleichende Auswertebasis zu bilden.
It has been pointed that most of the accidents on the roads are caused by driver faults, inattention and low performance. Therefore, future active safety systems are required to be aware of the driver status to be able to have preventative features. This probe study gives a system structure depending on multi-channel signal processing for three modules: Driver Identification, Route Recognition and Distraction Detection. The novelty lies in personalizing the route recognition and distraction detection systems according to particular driver with the help of driver identification system. The driver ID system also uses multiple modalities to verify the identity of the driver; therefore it can be applied to future smart cars working as car-keys. All the modules are tested using a separate data batch from the training sets using eight drivers" multi-channel driving signals, video and audio. The system was able to identify the driver with 100% accuracy using speech signals of length 30 sec or more and a frontal face image. After identifying the driver, the maneuver/ route recognition was achieved with 100% accuracy and the distraction detection had 72% accuracy in worst case. In overall, system is able to identify the driver, recognize the maneuver being performed at a particular time and able to detect driver distraction with reasonable accuracy.
The aim of this study was to evaluate the performance and accuracy of Event Data Recorders (EDRs). The analysis was based on J-NCAP crash tests from 2006"2007, with the corresponding EDR datasets. The pre-crash velocity, maximum delta-V and delta-V versus time history data recorded in the EDRs were compared with the reliable crash test data. The difference between the EDR pre-crash velocity and the laboratory test speed was less than 4 percent. In contrast, in several cases the maximum delta-V and delta-V versus time history data obtained from the EDRs showed uncertainty of measurement in comparisons with the reliable delta-V data. The difference in maximum delta-V in these comparisons was more than 5 percent in 10 of 14 tests and more than 10 percent in 4 of 14 tests. The EDRs underestimated the maximum delta-V in almost all tests. It was also concluded that the calculated acceleration from the EDR delta-V versus time history data showed good agreement with the instrumented accelerometer signal during the collision in almost all tests.
Impact severity is a fundamental measure for all in-depth crash investigation projects. One methodology used in the UK is based on the US Calspan software package CRASH3. The UK- in-depth crash investigation studies routinely use AiDamage3 a software package which is based on an updated version of the original CRASH3 algorithm, including enhancements to the vehicle stiffness coefficients. Real world accident-damaged vehicles are measured and their crush is correlated with a library of stiffness coefficients. These measurements are then used, along with other parameters, to calculate the crash energy and equivalent changes of velocity of the vehicles (delta-v), which is a measure of the impact severity. UK in-depth accident studies routinely validate the crash severity methodologies applied as the vehicle fleet changes. This is achieved by analysing crash test data and using the appropriate residual crush damage and other inputs to AiDamage3 and checking the program- outputs with the known crash severity parameters. This procedure checks, at least in part, the default stiffness values in the data libraries and the reconstruction methods used.
Who doesn't wear seat belts?
(2009)
Using real world accident data, seat belts were estimated to be 61% effective at preventing fatalities, and 32% effective at preventing serious injuries. They were most effective for drivers with an airbag. Seat belts were estimated as having prevented 57,000 fatalities and 213,000 seriously injured casualties in the UK since 1983. Seat belt legislation was estimated to have prevented 31,000 fatalities and 118,000 seriously injured casualties. A future increase in effective seat belt wearing rate (which takes into account seating position) in the UK from 92.5% to 93% may prevent casualties valued at a societal cost of over -£18 million per year. To target a seat belt campaign, the question "who doesn"t wear seat belts?" must be answered. Seat belt wearing rates and the number of unbelted casualties were analysed. It was primarily young adult males who didn"t wear seat belts, and they made up the majority of unbelted fatalities and seriously injured casualties.
In a first step, we have examined approximately 23 000 single vehicle accidents within the Austrian National Statistics database. In a second step, we considered 15% of all fatal "running off the road" accidents that occurred in Austria in 2003. As a result, two accident categories were specified; "leaving the road without preceding manoeuvre" and "leaving the road with preceding manoeuvre". These two categories can be basically characterised by the vehicle- heading angle and its velocity angle. In this report, we further suggest theoretical approaches for the dimensioning of a safety zone, an area adjacent to the road free of fixed objects or dangerous slopes. We also show the link between the two accident categories mentioned above and the real world accidents analysed in detail. These observations also form the basis for the required length for safety devices. Finally, we summarise accident avoidance strategies.
This study aims to analyze spine injuries in motor vehicle accidents. Between 1985 and 2004 the Hannover accident research unit documented 18353 accidents. We identified 161 front passengers (0.53%) with cervical spine injuries, 84 (0.28%) with thoracic and 95 (0.31%) with lumbar injuries. Technical and medical data was reviewed. Patients" records were retrieved. X-rays were evaluated and fractures were classified according to the Magerl classification. 68% and 57% of thoracic and lumbar fractures occurred in accidents with multiple impacts. Delta-v was 50, 40 and 40 kph in passengers with cervical, thoracic and lumbar spine, resp. Passengers with spinal fractures frequently showed numerous concomitant injuries, e.g. additional vertebral fractures. The influence of seat belts and airbags is discussed. Patient work-up has to include a thorough investigation for additional injuries.
The bicyclist accidents were analyzed to get better understanding of the occurrences and frequency of the accidents, injury distributions, as well as correlation of injury severity/outcomes with engineering and human factors in two different countries of China and Germany. The accident cases that occurred from 2001 to 2006 were collected from IVAC database in Changsha and GIDAS database in Hannover. Based on specified sampling criteria, 1,570 bicyclist cases were selected from IVAC database in Changsha, and 1806 cases were collected from Hannover, documented in GIDAS database. Statistical analyses were carried out by using these selected data. The results from the statistical analysis are presented and discussed in this study.
The focus of the technical innovation in the automobile industry is currently changing to sensor based safety systems, which are operating in the pre-crash phase of an accident. To get more information about this pre-crash phase for real accidents a simulation of this phase using the GIDAS database is done. The basics for this simulation are geometrical information about the accident location and the exact accident data out of the GIDAS database. This aggregated information gives the possibility to simulate an exact motion for every accident participant, using MATLAB / SIMULINK, in the pre-crash phase. After the simulation the information about the geometrical positions, the velocities and maneuvers of the drivers to an individual TTC (time to collision) are available. With those results it is possible to develop new useful sensor geometries using pre-crash scatter plots or estimate the efficiency of implemented active safety systems in combination with sensor characteristics. This simulation can be done for every reconstructed accident included in the GIDAS database, so these results can represent a wide spread basis for the further development of active safety systems and sensor geometries and characteristics
Over the last decades the number of traffic accident fatalities on German roads decreased by 77% down to 4968 in the year 2007. This positive development is due to optimisations of vehicle safety, roads and infrastructure and medical rescue issues. Up to now mostly the optimisations of secondary safety measures lead to this effect on vehicle safety. Since some years more and more driver assistance systems are available and lead to a further reduction of all accidents. These new systems are often comfort systems and have not primarily been developed to increase vehicle safety. In contrast to secondary safety systems primary safety systems are able to mitigate and avoid accidents. So in the future it is important to estimate the benefit of these systems in reducing accident numbers as well. Current benefit estimation methods mostly focus on a single system only and not on the combination of systems. In this paper a new method for a multivariate benefit estimation based on real accident data is developed. The paper describes the basic method to estimate the benefit of primary and secondary safety systems in combination. With the presented method the benefit will not be overestimated as it would be by a simple addition of the benefits of single systems. The model will be validated by a multivariate prospective benefit estimation of different vehicle safety systems in comparison to single benefit estimations of the same systems. For this the German In-Depth Accident Database is used. The results show the importance to implement the interactions of safety systems in the estimation process and rate the overestimation by a simple addition of the single system benefits. The validation includes primary and secondary safety systems in combination. The validation is done using more than 3500 real accidents which were initiated by cars. This sample out of the GIDAS database is representative for the current accident situation in Germany. The paper shows the necessity of a multivariate estimation of the benefit for existing and future safety systems.