Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (563)
- Konferenzveröffentlichung (404)
- Wissenschaftlicher Artikel (92)
- Bericht (23)
- Teil eines Buches (Kapitel) (14)
- Arbeitspapier (13)
Sprache
- Deutsch (771)
- Englisch (337)
- Mehrsprachig (1)
Schlagworte
- Germany (575)
- Deutschland (574)
- Research report (413)
- Forschungsbericht (411)
- Conference (329)
- Konferenz (325)
- Accident (229)
- Unfall (229)
- Safety (225)
- Sicherheit (223)
Institut
- Sonstige (1109) (entfernen)
Entwicklung eines methodischen Rahmenkonzepts für Verhaltensbeobachtung im fließenden Verkehr
(2012)
Vielfach soll durch Verkehrsbeobachtung die Entwicklung des Verkehrsverhaltens im Zeitverlauf aufgezeigt und/oder die Wirksamkeit von Verkehrssicherheitsmaßnahmen bewertet werden. Charakteristisch dabei ist, dass bislang für jedes Vorhaben ein eigenes Studiendesign entwickelt wird, obwohl sich die jeweiligen Forschungsfragen trotz ihrer inhaltlichen Vielfalt aus methodischer Sicht auf einige wenige Grundmuster von Aufgabenstellungen reduzieren lassen. Im vorliegenden Forschungsvorhaben geht es deshalb darum, für Erhebungen, bei denen das Verhalten von Verkehrsteilnehmern im fließenden Verkehr beobachtet wird, ein möglichst allgemein anwendbares Design zu entwickeln. Ziel des vorliegenden Projektes ist es somit auch, das Spektrum der Methodik von Verhaltensbeobachtungen im fließenden Verkehr darzustellen sowie auf Probleme und Randbedingungen aufmerksam zu machen. Damit soll all denjenigen eine Hilfestellung gegeben werden, die beabsichtigen, solche Studien durchzuführen. In Kapitel 2 des Berichts werden zunächst einige nationale und internationale Projektbeispiele für Verhaltensbeobachtungen im fließenden Verkehr vorgestellt, auf deren Basis dann das hier in Rede stehende methodische Rahmenkonzept entwickelt wird. Kapitel 3 enthält eine Einordnung der Erhebungsmethode Verhaltensbeobachtung in den konzeptuellen Rahmen der Statistik und empirischen Sozialforschung. Im 4. Kapitel werden statistische Kennzahlen des Verkehrsverhaltens, die aus Beobachtungen gewonnen werden können, systematisiert und zusammengestellt. Kapitel 5 beschäftigt sich mit für Verhaltensbeobachtungen adäquaten Stichprobendesigns, in Kapitel 6 sind die zugehörigen Formeln für die Hochrechnung und Genauigkeitsbeurteilung (Konfidenzintervalle) der Ergebnisse aufgeführt. Kapitel 7 enthält einige methodische Hinweise zu Möglichkeiten und Grenzen der Ziehung einer Zufallsstichprobe für Verhaltensbeobachtungen, in Kapitel 8 wird der Prozess einer Verhaltensbeobachtung unter erhebungspraktischen Gesichtspunkten - basierend auf dem entwickelten Rahmenkonzept - beleuchtet. Vor der Zusammenfassung und den Empfehlungen (Kap. 10) wird in Kapitel 9 noch ein Vergleich des hier entwickelten methodischen Rahmenkonzepts mit der Vorgehensweise bei den aktuellen Erhebungen der BASt zum Schutzverhalten angestellt. In den Schlussbericht sind auch die Ergebnisse eines Workshops eingeflossen, der im Rahmen dieses Projekts am 18.01.2010 in Bergisch Gladbach durchgeführt wurde.
Auf Brücken, insbesondere auf Stahlbrücken, bildet sich im Winter gegenüber den anderen Streckenabschnitten oft vorzeitig Glätte. Dadurch kann der Straßenverkehr in erheblichem Maße gefährdet werden. Es gibt verschiedene Möglichkeiten das vorzeitige Auftreten von Glätte zu verhindern. Die derzeit gebräuchlichsten Methoden sind die Brücken vorzeitig zu streuen oder automatische Taumittelsprühanlagen zu installieren. In dem vorliegenden Projekt wurde eine weitere, innovative Methode untersucht, nämlich die Temperierung der Fahrbahn mit Hilfe von Geothermie. Dazu wurden Simulationsreihen und damit zusammenhängende praxisnahe Messungen durchgeführt. Die Messungen wurden auf einer eigens hierfür hergestellten Testbrücke aus Stahl-Brückenmodulen sowie in weiteren Testfeldern auf bestehenden Brücken vorgenommen. Der Bericht stellt wichtige Informationen und Ergebnisse zur Verfügung, die notwendig sind, um ein Brücken-Projekt mit Fahrbahn-Temperierung zu planen und umzusetzen. Dabei werden die Aspekte - konstruktive Gestaltung, - thermische Eigenschaften, - mechanische Festigkeit, - Regelstrategien und " Wirtschaftlichkeit eines solchen Systems betrachtet. Weiterhin enthält der Bericht Beispiele, welche Varianten hinsichtlich des geothermischen Systems möglich sind, und gibt Eckdaten zu deren Dimensionierung an. Nach den hier vorliegenden Ergebnissen ist die Realisierung eines Fahrbahn-Temperierungs-Systems mittels Geothermie für Stahlbrücken möglich. Die thermische Leistung ist für den angestrebten Zweck ausreichend. Hinsichtlich der mechanischen Eigenschaften konnten zumindest keine kurzfristig erkennbaren Beeinträchtigungen festgestellt werden, wobei hier weiterer Forschungsbedarf besteht. Damit bietet die geothermische Fahrbahntemperierung die Möglichkeit, umweltschonend zur Vermeidung von frühzeitiger Glättebildung auf Straßenbrücken beizutragen.
Als Ergebnis des Forschungsvorhabens wurde ein Simulationsverfahren für die Ermittlung von Streckenkapazitäten auf Bundesautobahnen (BAB) bei winterlichen Straßenzuständen erarbeitet. Der Berechnungsansatz wurde auf eine robuste Verfahrensweise ausgelegt, um die Auswirkungen von Ungenauigkeiten und Fehlern der Eingangsgrößen zu minimieren. Das Verfahren orientiert sich an den technischen Rahmenbedingungen wie z.B. die Eigenschaften der derzeit verfügbaren Daten der Wetterprognose und der Umfelddatenerfassung. Zugleich werden die Anforderungen an die Nutzung der Prognoseergebnisse berücksichtigt. Ausgehend von einer Grundkapazität der Streckenabschnitte in Anlehnung an das Handbuch für die Bemessung von Straßenverkehrsanlagen (HBS) wurden Abschlagsfaktoren für die jeweils vorherrschende Witterungssituation ermittelt. Diese Witterungseigenschaften wurden zuvor anhand charakteristischer Eingangsgrößen zusammengefasst und als Wetterklassen definiert. Das nachgeschaltete Prognoseverfahren ist als zweistufiger Ansatz mit einer Planungsprognose für die vorausschauende Disposition sowie einer Kurzfristdarstellung für die operative Durchführung der Verkehrsmanagements, des Straßenbetriebsdienstes und des Arbeitsstellenmanagements aufgebaut. Es basiert auf einem Warteschlangenmodell. Die Ergebnisse zeigen mögliche Stauereignisse auf und können als Entscheidungshilfe verwendet werden. Beide Komponenten setzen auf den gleichen grundsätzlichen Vorgehensweisen für die Prognose auf. Es bleibt offensichtlich, dass die Güte der Wetterprognose für die korrekte Auswahl der Wetterklasse entscheidend ist. Die Zuverlässigkeit der nachfolgend aufgesetzten Prognose des Verkehrsablaufs korreliert daher unmittelbar mit der Qualität der Eingangsgröße Wetterprognose. Aus diesem Grund ist der Bereitstellung hochwertiger und kleinräumiger Wetterprognosen für den Straßenbetriebsdienst die erforderliche Aufmerksamkeit zu widmen. Die im Forschungsvorhaben entwickelte modelltechnische Abbildung der witterungsbedingten Kapazitätseinschränkung und ihrer Auswirkungen auf den Verkehrsablauf durch zwei Risikostufen in Form einer "Warnung" und eines "Alarms" hat sich in der Evaluierung bewährt. Dabei ist die betriebsnahe Interpretation der Prognoseergebnisse möglich. Das Verfahren mit den Vorhersagen des Verkehrszustands Eingangsgrößen beweist, dass sie als Auslösekriterien für Maßnahmen des Verkehrsmanagements genutzt werden können.
The paper presents a methodology for the benefit estimation of several secondary safety systems for pedestrians, using the exceptional data depth of GIDAS. A total of 667 frontal pedestrian accidents up to 40kph and more than 500 AIS2+ injuries have been considered. In addition to the severity, affected body region, exact impact point on the vehicle, and the causing part of every injury, the related Euro NCAP test zone was determined. One results of the study is a detailed impact distribution for AIS2+ injuries across the vehicle front. It can be stated, how often a test zone or vehicle part is hit by pedestrians in frontal accidents and which role the ground impact plays. Basing on that, different secondary safety measures can be evaluated by an injury shift method concerning their real world effectiveness. As an example, measures concerning the Euro NCAP pedestrian rating tests have been evaluated. It was analysed which Euro NCAP test zones are the most effective ones. In addition, real test results have been evaluated. Using the presented methodology, other secondary safety like the active bonnet (pop-up bonnet) or a pedestrian airbag measures can be evaluated.
Tree impacts are still one of the most important focal points of road deaths in Germany. For the year 2008, the latest figures in the national statistics show a share of 28% of road users killed in crashes with trees alongside a road amongst all crashes on rural roads (except the Autobahn). The official German statistics show the attribute "impact on a tree" since 1995. For this first reported year, the share of road users killed in such crashes was 30%. During the last 14 years, fatal accidents with road users killed on rural roads (except the Autobahn) after impacts on a tree declined by 60% from 1,737 (year 1995) to 696 (year 2008). But this is more or less in line with the general evolution of vehicle and traffic safety in Germany. For Germany as a whole the accident statistics do not show a reduction for "treer crashes" which is clearly more than the average for all accidents. But, as shown with the paper, there are different evolutions in the several German States. In public awareness the topic "tree impacts" is mostly associated with the situation in Germany after the reunification. At that time a lot of road users were killed on the avenues in the so called "new countries". The fact that "tree impacts" are still a big share within the figure of killed road users seems to be little-known. Using updated information coming from the official statistics and in-depth-studies, accident researchers can identify a big potential for further improvements of traffic safety on the associated district roads, state roads and federal highways. There is still a need to analyse more details of the accident occurrence with impacts on trees to generate new and updated findings on the current limits and potentials of measures to improve vehicle and traffic safety. To make further efforts in reducing the figures of victims of "tree impacts" the intensification of well-known conventional solutions " for example implementation of guard rails and reduction of speed - is an option. Measures related to vehicle safety technology especially in the field of primary (active) safety will have additional benefit within the physically imposed limits. With this background it can be seen that the subject "tree impacts" should be analysed with a holistic approach taking into account the entire system of driver, vehicle, road, the environment and a social consensus as well.
Looking at the total of sum of fatal car accidents the number of single-vehicle accidents and particularly run-offroad (ROR) accidents are most frequent. In Austria on the Autobahn ROR accidents amounts to almost 45% of all fatal accidents, i.e. nearly every second fatal accident is caused by ROR accidents and interaction with infrastructure. Approximately 43 people were killed on Autobahns in ROR accidents with passenger cars. One possibility of protection against impacts with infrastructure is the use of guardrails. However, the initial element identified as a turned down terminal could become a dangerous impact object. These turned down terminals may lead a vehicle to roll over or the car "takes-off" when impacting the turned down guardrail. In many cases it is reported that the vehicle is jumping into road side objects such as traffic sign poles or overpasses. On average, nine people are killed in such accidents every year in Austria.
Small overlap frontal crashes are defined by a damage pattern with most of the vehicle deformation concentrated outboard of the main longitudinal structures. These crashes are prominent among frontal crashes resulting in serious and fatal injuries, even among vehicles that perform well in regulatory and consumer information crash tests. One of the critical aspects of understanding these crashes is knowing the crash speeds that cause the types of damage associated with serious injuries. Laboratory crash tests were conducted using 12 vehicles in three small overlap test conditions: pole, vehicle-to-vehicle collinear, and vehicle-to-vehicle oblique (15-degree striking angle). Field reconstruction techniques were used to estimate the delta V for each vehicle, and these results were compared with actual delta V values based on vehicle accelerometer data. Estimated delta Vs were 50% lower than actual values. Velocity change estimates for small overlap frontal crashes in databases such as NASS-CDS significantly underestimate actual values.
Bone fracture patterns could be crucial in reconstructing the nature of loading, especially in the lower limb and upper limb kinematics in vehicle-pedestrian crashes. In addition, use of FE bone models can be a handy tool to predict vehicle impact velocity and the impact direction. The point of fracture initiation in bone loading has been predicted quite accurately earlier. A methodology that predicts bone crack initiation and its propagation pattern for the six known loading directions using a single material and failure model is presented.
Pedestrian and cyclist are the most vulnerable road users in traffic crashes. One important aspect of this study was the comparable analysis of the exact impact configuration and the resulting injury patterns of pedestrians and cyclists in view of epidemiology. The secondary aim was assessment of head injury risks and kinematics of adult pedestrian and cyclists in primary and secondary impacts and to correlate the injuries related to physical parameters like HIC value, 3ms linear acceleration, and discuss the technical parameter with injuries observed in real-world accidents based documented real accidents of GIDAS and explains the head injuries by simulated load and impact conditions based on PC-Crash and MADYMO. A subsample of n=402 pedestrians and n=940 bicyclists from GIDAS database, Germany was used for preselection, from which 22 pedestrian and 18 cyclist accidents were selected for reconstruction by initially using PC-Crash to calculate impact conditions, such as vehicle impact velocity, vehicle kinematic sequence and throw out distance. The impact conditions then were employed to identify the initial conditions in simulation of MADYMO reconstruction. The results show that cyclists always suffer lower injury outcomes for the same accident severity. Differences in HIC, head relative impact velocity, 3ms linear contiguous acceleration, maximum angular velocity and acceleration, contact force, throwing distance and head contact timing are shown. The differences of landing conditions in secondary impacts of pedestrians and cyclists are also identified. Injury risk curves were generated by logistic regression model for each predicting physical parameters.
The accident research of Hanover and (from 1999 on) Dresden registered 736 leg injuries (AIS ≥ 2) from 1983 to March 2007. 174 of these injuries (23.6 %) were fractures or dislocations of foot and ankle. 149 feet of 141 front seat car occupants in 140 cars were affected. Of these 117 were drivers, 24 were front seat passengers. The mean age of occupants was 38.5 -± 16.8 years. Ankle fractures were the most frequent injury (n = 82; 80 malleolar fractures, 2 pilon fractures). 34 fractures and dislocations affected the hindfoot (5 talus and 26 calcaneal fractures, 2 subtalar dislocations and 1 subtotal amputation) , 16 to midfoot (4 navicular fractures, 5 cuboid fractures, 3 fractures of cuneiformia, 2 dislocations of chopart joint, 1 subtotal amputation, and one severe decollement) and 39 the forefoot (metatarsal fractures). Open fractures were seldom seen (2 malleolar fractures, 1 metatarsal fracture). Both feet were injured in 10 cases. 33 occupants (23.4 %) were polytaumatic had a polytrauma, 17 of them died. 81 percent of the occupants were belted. The cars were divided in pre EuroNCAP (year of manufacture 1997 and older) and post EuroNCAP cars (year of manufacture 1998 and newer). Most of the foot injuries were seen in pre EuroNCAP cars. Most of the occupants sat in compact cars (40 drivers and 9 front seat passengers) and large family cars (27 drivers and 7 co-drivers). 49 of 140 accidents occurred on country roads, 26 on main roads and 13 on motorways. The crash direction was mostly frontal. Generally were found no differences of delta v- and EES-level between the injured foot regions, but divided into pre- and post-EuroNCAP cars there was a tendency to higher delta v- and EES-levels in newer cars. The frequency of foot injuries increased linearly with increasing delta v-level; but above delta v-level of 55 km/h the linear increase only was seen in pre-EuroNCAP cars, post-EuroNCAP cars showed no further increase of injuries. The footwell intrusion showed no difference between the injured foot regions but pre-EuroNCAP cars had a tendency to higher footwell intrusion. There were no differences in footwell intrusion between the car types. Only 29 of 174 fractures or dislocations of foot were seen in post-EuroNCAP cars, the predominate number of these injuries (n = 145) were noticed in pre-EuroNCAP cars. A lower probability of long-term impairment was found in post-EuroNCAP cars for equal delta v levels, using the AIS2008 associated Functional Capacity Index (FCI) for the foot region.
Unfortunately, there has been a high number of accident fatalities reported in the Czech Republic in recent years. There are many causes which have led to a growth in the number of road traffic accidents. Since 1990, traffic density has demonstrated an upward moving tendency, daily traffic-jams are on the increase in many cities and traffic capacity on roads and streets is not able to satisfy this increasing density. Moreover, many road users lack experience in terms of driving modern cars. The National Accident Study of the Czech Republic is based on the assumption that the year 2010 is considered as a pilot project with the testing operation of collecting and evaluating data from traffic accidents. From the beginning of 2011, a fully-functional structure of the Traffic Accident Research will be created and solid data generated. Based on this assumption, we hope to begin meaningful cooperation with foreign countries.
Recent findings from real-world accident data have shown that fatality risks for pedestrians are substantially lower than generally reported in the traffic safety literature. One of the keys to this insight has been the large and random sample of car-to-pedestrian crashes available in the German In-Depth Accident Study (GIDAS). Another key factor has been the proper use of weight factors in order to adjust for outcome-based sampling bias in the accident data. However, a third factor, a priori of unknown importance, has not yet been properly analysed. This is the influence of errors in impact speed estimation. In this study, we derived a statistical model of the impact speed errors for pedestrian accidents present in the GIDAS database. The error model was then applied to investigate the effect of the estimation error on the pedestrian fatality risk as a function of car impact speed. To this end, we applied a method known as the SIMulation-EXtrapolation (SIMEX) method. It was found that the risk curve is fairly tolerant to some amount of random measurement error, but that it does become flattened. It is therefore important that the accident investigations and reconstructions are of high quality to assure that systematic errors are minimised and that the random errors are under control.
A national initiative from the vehicle manufacturers, safety system suppliers, the road administration and universities in Sweden took off in 2007. The aim was to develop a national investigation network and a methodology focusing on all phases of a crash (pre-crash, in-crash and post-crash) as well as all parts of the road transport system (road user, vehicle and road environment). The initiative is formally run as a project with the acronym INTACT (Investigation Network and Accident Collection Techniques). It was a three year pilot with the aim to develop methodologies for an extended national crash investigation activity. During the first year the INTACT partners agreed on the aim for the investigation and methods for retrieving the data were developed. During the second and third year the methodology was tested in real-world investigations and further refinement was made. The paper describes the methodology developed to obtain high qualitative in-depth road crash data.
Ziel des Forschungsvorhabens war die Entwicklung eines Verfahrens zur Quantifizierung von Verkehrsverlagerungen durch Arbeitsstellen im Bereich der Bundesautobahnen. Eine wesentliche Grundlage der Untersuchung bildeten Datenanalysen der rund 1.350 automatischen Dauerzählstellen im Bundesfernstraßennetz. Die Ermittlung möglicher Verlagerungseffekte wurde zusätzlich an ausgewählten Beispielen mit Hilfe von makroskopischen Verkehrsmodellen analysiert. Zusammenfassend zeigten die Analysen, dass während der Arbeitsstellenzeit Verlagerungseffekte fast ausschließlich in den Spitzenstunden auftreten. In diesen Stunden erreichten die Änderungen der Belastung auf den Autobahnabschnitten eine Größenordnung von 2% bis 5%. Über den Tag gesehen ergibt sich eine mittlere Verlagerung unter 1%. Im Rahmen der durchgeführten Regressions- und Clusteranalysen konnten keine Einflussfaktoren oder Merkmalskombinationen ermittelt werden, die die Ursachen für die durch Arbeitsstellen bedingten Belastungsänderungen mit einer ausreichenden Zuverlässigkeit erklären konnten. Lediglich eine Differenzierung der Arbeitsstellenrichtungen nach unterschiedlichen Typen von Verkehrsführungen führte zu dem Ergebnis, dass nennenswerte Verlagerungen lediglich für die Arbeitsstellensituationen auftreten, bei denen eine Reduzierung der Fahrstreifenanzahl von 2 auf 1 oder von 3 auf 2 Fahrstreifen erfolgte. Aufgrund der Erkenntnisse, dass Arbeitsstellen bedingte Verkehrsverlagerungen auch bei hohen Streckenbelastungen deutlich niedriger sind als bisher vielfach angenommen, die Verkehrsverlagerungen sich auf die hochbelasteten Stundenbereiche beschraenken, die Verlagerungen mit der Dauer der Arbeitsstellenlaufzeit abklingen und keine funktionalen Abhängigkeiten mit hohem Bestimmtheitsmaß ermittelt werden konnten, ist die Berücksichtigung Arbeitsstellen bedingter Verkehrsverlagerungen auf Autobahnen im Rahmen von gesamtwirtschaftlichen Bewertungen vermutlich nur in sehr geringem Umfang ergebnisrelevant.
In India, heavy truck crashes on national highways account for a number of fatalities. But due to lack of in-depth crash data, detailed analysis is not possible to determine injury mechanisms, and to identify infrastructure, vehicle and human factors affecting these crashes. Over the past two years, researchers in India have established a crash investigation network, with the co-operation of the police and hospitals, to conduct crash investigations and in-depth crash data collection on national highways in the state of Tamil Nadu. This pioneering effort has resulted in the development of a heavy truck crash investigation methodology, the outcome of which is scientific and reliable crash data that has been able to provide good insight into truck crashes and their causes. This paper explains the need for truck crash investigations, the methodology, conclusions of the data analyzed up to date, and the need to focus on truck driver working conditions.
Aim of the study was to evaluate the protective effect of bicycle helmets particularly considering injuries to the head and to the face. Accidents with the participation of bicyclists which occurred from 2000 to 2007 were chosen from GIDAS. We observed that injuries to the head and face were more severe in the group of non-helmeted riders. There seems to be no significant difference in injuries with AIS 3-6. Altogether 26 cyclists were killed. 2 of them wore a helmet (1% of helmeted cyclists), 24 did not (1% of non-helmeted cyclists). Only one killed rider (without helmet) did not suffer from polytrauma (only head injuries recorded). The findings seem to support the thesis of a preventive effect of the bicycle helmet, however the two groups are different in their characteristics related to riding speed. Necessarily we need a multivariate model to evaluate the effect of helmets.
Providing effective occupant protection in rollover crashes requires supplying the occupant with a restraint system proven effective in the dynamic rollover accident mode. Preventing ejection and providing restraint sufficient to prevent potentially injurious contacts with both interior and exterior vehicle components is paramount for effective rollover occupant protection. Research has shown that the injury potential can be decreased by closely coupling the occupant to the seat. This paper focuses on the effect of restraint system slack and its relationship to occupant excursion and ejection potential during rollover. Various restraint system configurations are evaluated in rollover-type test environments. A review of prior research is presented prior to presenting new quasi-static vehicle inversion studies conducted with live surrogate occupants. Additionally, dynamic rollover testing utilizing anthropometric test devices (ATDs) is presented. The influence of belt looseness and effects of various restraint designs on the belted occupants' injury potential are discussed.
Mechanical properties of tibial bone at compressive strain rates of 50-200 s-1 are obtained through Split Hopkinson pressure bar. Cylindrical specimens of 12-15 mm diameter and 2-5 mm thickness were used. The Young- moduli are calculated from linear portion of stress-strain curves. For both cortical and cancellous part of the bones, the Young- modulus was found to increase with the increasing strain rates. Also for both cancellous and cortical bones the Young- modulus increases consistently with increase in densities.
Among European Countries, Spain first issued a Standard, UNE 135900:2005, further updated in 2008, that deals with homologation and effectiveness evaluation of road restraint systems components designed to reduce harm for bikers impacting on them. An in depth analysis and critical review of this standard is reported in this paper. Beside a close examination of the standard requirements, numerical models of the crash test stated by the standard have been set up and simulated to study the effects of slight speed and approach angle variations on test results, remaining within tolerance gaps allowed by the standard. Model were validated against experimental data. Together with the expected increasing severity of the impact according with speed, a strong influence of approach angle on injury parameters was found. Possible improvements to the norm, in order to make it more robust, are suggested.
The need of passive safety devices, able to reduce the accidents and the severity of injuries suffered by motorcyclist, distinctly arises from data on accident statistics. In this paper, the effectiveness of an airbag device fitted in the biker- garments has been verified through various numerical simulations. Two simple test conditions were defined, in order to investigate the performance of the device both for back and front impacts, and simulated at various impact speeds. With the aim of providing more information about the actual capability of the airbag to reduce the severity of the injuries, one of accident scenario described by ISO 13232:2005 has been also investigated, checking the real effectiveness of the airbag strap-based firing system too. Confrontation of injury indexes resulting from simulation with and without airbag made possible a realistic evaluation of the harm reduction induced by the airbag presence.