Sonstige
Filtern
Erscheinungsjahr
- 2017 (119)
- 2015 (101)
- 2013 (99)
- 2009 (78)
- 2010 (77)
- 2016 (69)
- 2007 (67)
- 2005 (59)
- 2014 (55)
- 2008 (51)
- 2011 (37)
- 2012 (32)
- 2004 (30)
- 2006 (29)
- 2018 (28)
- 1991 (25)
- 1988 (19)
- 1989 (16)
- 1992 (16)
- 1990 (15)
- 1987 (14)
- 2003 (13)
- 1998 (9)
- 2019 (9)
- 1986 (6)
- 1995 (5)
- 2002 (5)
- 2000 (4)
- 1976 (3)
- 1979 (3)
- 1996 (3)
- 2001 (3)
- 1981 (2)
- 1982 (2)
- 1985 (2)
- 1999 (2)
- 1978 (1)
- 1997 (1)
Dokumenttyp
- Buch (Monographie) (563)
- Konferenzveröffentlichung (404)
- Wissenschaftlicher Artikel (92)
- Bericht (23)
- Teil eines Buches (Kapitel) (14)
- Arbeitspapier (13)
Sprache
- Deutsch (771)
- Englisch (337)
- Mehrsprachig (1)
Schlagworte
- Germany (575)
- Deutschland (574)
- Research report (413)
- Forschungsbericht (411)
- Conference (329)
- Konferenz (325)
- Accident (229)
- Unfall (229)
- Safety (225)
- Sicherheit (223)
Institut
- Sonstige (1109) (entfernen)
The National Roads Authority in Ireland is responsible for planning and supervision of construction and maintenance works on the National Road network. Its primary function is "to secure the provision of a safe and efficient network of national roads". The population of Ireland has grown rapidly from 3.5 million to 4 million within the past 10 years, and vehicle ownership has also risen rapidly to 2 million vehicles, with 2.2 million drivers. Collisions rates in Ireland are at approximately 1.5 collisions per 1,000 population (in 2002), and 8.4 deaths per 1,000,000 population (in 2003). This ranked 8th out of the 15 countries in the European Union at the time. Ireland- current Road Safety Strategy includes Engineering Targets. These are to complete construction of certain lengths of new motorway, dual carriageway and 2+1 highway, to implement a certain number of accident remedial and traffic calming schemes, and to implement road safety audit on all new schemes. The accident remedial schemes, traffic calming schemes, and road safety audit are all the responsibility of the Road Safety section of NRA. The road safety programme of the NRA is divided into four main areas; a) accident remedial measures at individual sites, b) accident remedial treatment of entire routes, c) traffic calming of towns and villages on main roads, d) road safety audit. Examples of these measures are described. Evaluation of past programmes of single site accident remedial measures show a reduction in collision occurrence at these sites, but the effectiveness and the economic rate of return is decreasing over successive programmes. A similar programme has now been adopted on the rest of the country- road network, on regional and local roads. The programme of remedial treatment of entire routes has only recently started and has not been evaluated. Evaluation of the first programme of traffic calming of towns and villages shows an overall decrease in collisions and their severity, and a small reduction in speed. Road Safety Audit, examining new schemes a number of times during design and after construction, has been standard procedure on the national road network for nearly 6 years. An evaluation is currently underway.
Estimation of the benefits for the UK for potential options to modify UNECE Regulation No. 95
(2010)
The side impact problem in Europe remains substantial. UK data shows that between 22% and 26% of car occupant casualties are involved in a side impact, but this rises to between 29% and 38% for those who are fatally injured. This indicates the more injurious nature of side impacts compared with frontal impacts. The European Enhanced Vehicle safety Committee (EEVC) has performed work to address the side impact issue since 1979. As part of its continuing work, it has recently investigated potential options for regulatory changes to improve side impact protection in cars further. To support this work the UK undertook an analysis to estimate the benefit for potential options to modify UNECE Regulation 95. The analysis used the UK national STATS19 and detailed Co-operative Crash Injury Study (CCIS) accident databases. Of the potential options reviewed, it was found that the addition of a pole test offered the greatest benefit.
Impact severity is a fundamental measure for all in-depth crash investigation projects. One methodology used in the UK is based on the US Calspan software package CRASH3. The UK- in-depth crash investigation studies routinely use AiDamage3 a software package which is based on an updated version of the original CRASH3 algorithm, including enhancements to the vehicle stiffness coefficients. Real world accident-damaged vehicles are measured and their crush is correlated with a library of stiffness coefficients. These measurements are then used, along with other parameters, to calculate the crash energy and equivalent changes of velocity of the vehicles (delta-v), which is a measure of the impact severity. UK in-depth accident studies routinely validate the crash severity methodologies applied as the vehicle fleet changes. This is achieved by analysing crash test data and using the appropriate residual crush damage and other inputs to AiDamage3 and checking the program- outputs with the known crash severity parameters. This procedure checks, at least in part, the default stiffness values in the data libraries and the reconstruction methods used.
Side-impact safety of passenger cars is assessed in Europe in a full-scale test using a moving barrier. The front of this barrier is deformable and represents the stiffness of an 'average' car. The EU Directive 96/27/EC on side impact protection has adopted the EEVC Side Impact Test Procedure, including the original performance specification for the barrier face when impacting a flat dynamometric rigid wall. The requirements of the deformable barrier face, as laid down in the Directive, are related to geometrical characteristics, deformation characteristics and energy dissipation figures. Due to these limited requirements, many variations are possible in designing a deformable barrier face. As a result, several barrier face designs are in the market. However, research institutes and car manufacturers report significant difference in test results when using these different devices. It appears that the present approval test is not able to distinguish between the different designs that may perform differently when they impact real vehicles. Therefore, EEVC Working Group 13 has developed a number of tests to evaluate the different designs. In these tests the barrier faces are loaded and deformed in a specific and/or more representative way. Barrier faces of different design have been evaluated. In the paper the set-up and the reasoning behind the tests is presented. Results showing specific differences in performance are demonstrated.
Ausgehend vom Blickverhalten beim Betrachten von statischen Konfigurationen werden die Parameter des Blickverhaltens (stimulusbedingte Einflussgrößen, Person des Betrachters) beschrieben. Die visuelle Informationsaufnahme wird als Wechselwirkung zwischen Anforderungen und Umweltmerkmalen verstanden. Aus der Fülle der Ergebnisse, die auch die Rolle der Fahrpraxis, die Trainierbarkeit des Blickverhaltens sowie den Zustand des Fahrzeuglenkers (Alkohol, Schlafmangel, Kohlenmonoxyd) berücksichtigen wie auch auf Fahrzeugmerkmale eingehen, werden Erkenntnisse für den alltäglichen Verkehr gezogen.
Traffic accidents were ranked the third among the major causes of death in Thailand. About 13,438 deaths and the death rate from traffic accident was 21.5 per 100,000 of population in 2002. The deaths and death rate varied upon the economic situation. After the economic crisis, traffic accidents were increased as well as the period of the bubble economy. In the Central region of Thailand numbers of road traffic crashes were lower than Bangkok Metropolis, but the highest in the number of deaths, death rate and serious injuries in 2002. Men aged 15"29 years old had higher numbers of deaths than men in other age groups and higher than women. Deaths and injuries from road traffic crashes were the highest in April and January, because there was a long weekend in those months. About 80 percent of road traffic crashes were caused by private car and motorcycle. In 2000 about 51 percent of traffic accidents took place on the straight way, followed by the junction and curves. In 2002, about 97 percent of road traffic crashes were caused by human factors including improper passing, speeding and disregarding to traffic signal, however, the identification of causes of traffic accident needed to improve. Drunk driving, disregarding on safety equipment usage, inefficiency of law enforcement and discontinuing of road safety programs were the deepest causes of traffic accidents. Research based information, a broad coalition of stakeholder and urban planning policy were needed to incorporate for a comprehensive road safety policy formulation and actions.
Pedestrian and cyclist are the most vulnerable road users in traffic crashes. One important aspect of this study was the comparable analysis of the exact impact configuration and the resulting injury patterns of pedestrians and cyclists in view of epidemiology. The secondary aim was assessment of head injury risks and kinematics of adult pedestrian and cyclists in primary and secondary impacts and to correlate the injuries related to physical parameters like HIC value, 3ms linear acceleration, and discuss the technical parameter with injuries observed in real-world accidents based documented real accidents of GIDAS and explains the head injuries by simulated load and impact conditions based on PC-Crash and MADYMO. A subsample of n=402 pedestrians and n=940 bicyclists from GIDAS database, Germany was used for preselection, from which 22 pedestrian and 18 cyclist accidents were selected for reconstruction by initially using PC-Crash to calculate impact conditions, such as vehicle impact velocity, vehicle kinematic sequence and throw out distance. The impact conditions then were employed to identify the initial conditions in simulation of MADYMO reconstruction. The results show that cyclists always suffer lower injury outcomes for the same accident severity. Differences in HIC, head relative impact velocity, 3ms linear contiguous acceleration, maximum angular velocity and acceleration, contact force, throwing distance and head contact timing are shown. The differences of landing conditions in secondary impacts of pedestrians and cyclists are also identified. Injury risk curves were generated by logistic regression model for each predicting physical parameters.
Mechanical properties of tibial bone at compressive strain rates of 50-200 s-1 are obtained through Split Hopkinson pressure bar. Cylindrical specimens of 12-15 mm diameter and 2-5 mm thickness were used. The Young- moduli are calculated from linear portion of stress-strain curves. For both cortical and cancellous part of the bones, the Young- modulus was found to increase with the increasing strain rates. Also for both cancellous and cortical bones the Young- modulus increases consistently with increase in densities.
Before 2002, France was in the queue of Europeans countries in terms of road safety results because of the low density of population and the faulty behaviour of French due itself to a very low level of traffic law enforcement Even if there were signs of the change of mind in France towards road safety before, the turning point was in summer 2002, when the President declared road safety as a priority work during his mandate. The more symbolic measure was the decision to settle an automatic speed control system (700 fixed and 300 mobile). Over three years, the average speed on French roads decreased by 5 km/h and the number of fatalities on road turned down from an average of 8000 deaths per year to 5 300, which represents a decrease of more than 34 %. For the next months, we anticipate that, as many drivers have kept loosing points on their driving licence through light speed violations, this will lead drivers to check their speed and the speed limits more systematically as loosing points on one's driving license has longer time effects than paying a fine. Consequently, we expect a decrease of 10 % to 15% of fatalities in 2006, which is a very good result if we compare with the trend of the last twenty five years (about 2,3 %). The reverse effect of this system that lies on the changes of behaviour of the majority is that, there is more and more discontent against the system taking into account that automatic speed control system allows only a minor tolerance above limits and that local speed limits are not always adapted to local infrastructure and traffic conditions. Another weakness of the system is that motorcyclists are too rarely caught by the system; the system is being gradually improved by placing the new speed cameras in position of taking photographs of the back of the vehicle. But this would not be sufficient to reduce the speed of motorcyclists that are a very high risk group (16% of fatalities for 0,8 % of traffic) For alcohol, there is no easy route for progress: all what is done nowadays is toward festive impaired driving (through designating sober drivers or mass alcohol preventive screenings) although there is not enough done towards chronic alcoholic driving.
Die als Pilotstudie gedachte Untersuchung stellt einen Versuch dar, aus den komplexen Wechselwirkungen zwischen Mensch, Umwelt und Fahrzeug diejenigen Einflussgrößen zu bestimmen, die das Unfallgeschehen wesentlich und langfristig bestimmen, Umfang und Intensität des Einflusses auf betroffene Verkehrsteilnehmergruppen einzugrenzen und Gesamteffekte abzuschätzen. Die Prognosen beziehen sich im Detail auf Verunglückte und Schwerverunglückte nach Straßenart, Unfallfolgen, Lebensalter und Unfallursachen. Als in besonderer Weise besorgniserregend wird die prognostische Entwicklung der Verunglücktenzahlen beim Kraftrad herausgestellt, wobei eine gravierende Reduktion wegen der Kopplung von hoher Geschwindigkeit, Ungeschütztheit und Risikofreudigkeit ohne unpopuläre, einschneidende Maßnahmen als kaum möglich erachtet wird.
An eCall device has been mounted on some vehicles in France since 2003. It is an integrated car radio/GSM/GPS system that can be used with a SIM card. When an accident occurs, a call can be sent manually or automatically made to a telephone call centre. Knowing the geographic location, the vehicle identity and the possibility of a direct communication with the people involved enables the nearest emergency services to be called out. In this context, the LAB / CEESAR have set up a study aimed at evaluating the effectiveness of this system. The purpose of this paper is to detail the E-call system evaluation method of effectiveness used and give a global synthesis of the results.
This work aims at bringing evidence for mass incompatibility in frontal impact for cars built according to the UNECE R94 regulation. French national injury accidents database census for years 2005 to 2008 were used for the analysis. The heterogeneity of frontal self-protection among cars of different masses is investigated, as well as the partner protection parameter offered by these cars. The last part of the analysis deals with the estimation of the benefit, in terms of fatal and severe injuries avoided, if crashworthiness was harmonized for the whole fleet of vehicle. This calculation is done for France and is extended to all Europe.
The need of passive safety devices, able to reduce the accidents and the severity of injuries suffered by motorcyclist, distinctly arises from data on accident statistics. In this paper, the effectiveness of an airbag device fitted in the biker- garments has been verified through various numerical simulations. Two simple test conditions were defined, in order to investigate the performance of the device both for back and front impacts, and simulated at various impact speeds. With the aim of providing more information about the actual capability of the airbag to reduce the severity of the injuries, one of accident scenario described by ISO 13232:2005 has been also investigated, checking the real effectiveness of the airbag strap-based firing system too. Confrontation of injury indexes resulting from simulation with and without airbag made possible a realistic evaluation of the harm reduction induced by the airbag presence.
Among European Countries, Spain first issued a Standard, UNE 135900:2005, further updated in 2008, that deals with homologation and effectiveness evaluation of road restraint systems components designed to reduce harm for bikers impacting on them. An in depth analysis and critical review of this standard is reported in this paper. Beside a close examination of the standard requirements, numerical models of the crash test stated by the standard have been set up and simulated to study the effects of slight speed and approach angle variations on test results, remaining within tolerance gaps allowed by the standard. Model were validated against experimental data. Together with the expected increasing severity of the impact according with speed, a strong influence of approach angle on injury parameters was found. Possible improvements to the norm, in order to make it more robust, are suggested.
Zur Erkennung und Beurteilung von Straßenschäden werden derzeit Bilder der Fahrbahnoberfläche erfasst und anhand eines Schadenskataloges bewertet. Die Auswertung der Aufnahmen wird bislang manuell durchgeführt, wodurch es zu unterschiedlichen Beurteilungen kommen kann. Um eine einheitliche Auswertung zu garantieren, soll im Rahmen des Forschungsprojektes eine Software zur teilautomatischen Merkmalssuche und -analyse von Oberflächenschäden entwickelt werden. Im vorangegangenen Projekt (FE 89.190/2007/AP) wurde bereits die Machbarkeit eines solchen Systems analysiert. Um die praktische Anwendbarkeit eines solchen Assistenzsystems untersuchen zu können, soll ein Arbeitsplatzrechner eingerichtet und mit einer entsprechend zu entwickelnden Software ausgerüstet werden. Des Weiteren ist zu untersuchen, inwiefern eine Bewertung der Oberflächenschäden automatisiert werden könnte. Es soll weiter untersucht werden, inwieweit die detektierten Merkmalsklassen ausgeweitet (das heißt Schadensmerkmale klassifiziert) werden können.
In-depth accident investigation offers many advantages for the analysis and comprehension of crash mechanisms. IFSTTAR makes such investigations since 1992 without interruption. The corresponding database contains more than 1200 accident case studies. Currently, in-depth accident investigation is one of the best ways to determine the speed or cars involved in accidents. This paper first presents the methods used for accident investigation and for accident kinematic reconstruction. Then, in order to illustrate the interest and possible applications of such accident data, it shows some results from a recent study based on the IFSTTAR in-depth accident study programme (IDAS) and dealing with the link between travelling speed and accident risk.
In diesem Bericht werden die Ergebnisse des Forschungsprojektes FE 84.0104/2009/ mit dem Titel "Untersuchung des Einflusses der Grobtextur auf Messergebnisse mit dem SKM-Messverfahren", das am Institut fuer Fahrzeugsystemtechnik (FAST) des Karlsruher Instituts für Technologie (KIT) im Auftrag der Bundesanstalt für Straßenwesen (BASt) durchgeführt wurde, vorgestellt. Dieses Forschungsprojekt hatte das Ziel, den Einfluss der Grobtextur (Makrotextur) auf die Geschwindigkeitsabhängigkeit und Temperaturabhängigkeit des SKM-Griffigkeitswertes zu untersuchen. Es wird die Funktionsweise des am Institut entwickelten und aufgebauten Griffigkeits- und Abriebprüfstand (GAT) erklärt. Mit diesem Prüfstand können Griffigkeitsversuche auf Fahrbahnproben durchgeführt werden. Weiterhin wird ein neu entwickeltes Abdruckverfahren füer die Herstellung von Fahrbahnabdrücken vorgestellt. Mit diesem können Fahrbahnabdrücke von realen Fahrbahnproben erzeugt werden. Durch eine Erweiterung des vorgestellten Abdruckverfahrens können des Weiteren Fahrbahnproben mit definierten künstlichen Makro- und künstlichen Mikrotexturen erzeugt werden. Somit können am GAT Griffigkeitsversuche auf realen Fahrbahnproben, aber auch auf speziell hergestellten Fahrbahnabdrücken durchgeführt werden. Mit der Kombination aus GAT und dem vorgestellten Abdruckverfahren kann der Einfluss der Fahrbahngrobtextur auf die Griffigkeit unabhäengig vom Materialeinfluss betrachtet werden. Abschließend werden die Ergebnisse der Griffigkeitsversuche, die am Griffigkeits- und Abriebprüfstand durchgeführt wurden, vorgestellt. Diese Ergebnisse werden mit Griffigkeitsversuchen am Innentrommelprüfstand des Institutes und mit SKM-Messdaten, die mit einem SKM-Messsystem auf der Straße gemessen wurden, verifiziert. Die ermittelten Ergebnisse zeigen, dass die Geschwindigkeitsabhängigkeit von der Fahrbahnmakrotextur beeinflusst wird. Zusätzlich muss jedoch auch der Einfluss der Fahrbahnmikrotextur berücksichtigt werden, da immer die Kombination aus Makro- und Mikrotextur für die Geschwindigkeitsabhängigkeit von Bedeutung ist. Der Einfluss der Fahrbahnmakrotextur auf die Temperaturabhängigkeit des SKM-Wertes konnte innerhalb dieses Forschungsprojektes nicht abschließend untersucht werden, da bei den durchgeführten Griffigkeitsversuchen am GAT mit den verwendeten Fahrbahnabdrücken Temperatureffekte auftraten, die zukünftig noch weiter analysiert werden müssen.
The market introduction and penetration of electric vehicles can be seen as a milestone in order to reduce the environmental burden imposed by the transport sector. The wide-spread use of electric vehicles powered by electricity from renewable sources promises a substantial reduction of local emissions in urban areas as well as greenhouse gas emissions. To be a successful mobility alternative several obstacles and challenges have to be overcome first. Especially the customers' purchase decision determines finally whether an innovation like electromobility will be successful. Therefore, this paper concentrates on demand-related obstacles and barriers for a broad market deployment of electric cars. Within the Electromobility+ project eMAP these issues are investigated via a consumer survey. It was designed to identify the awareness of potential consumers of electric cars as well as give an estimate of the attitude towards this new technology. In addition to the picture of potential demand-related obstacles the consumers were asked to evaluate the suitability of various promotion measures.
Optimierung der Fahrerlaubnisprüfung : Ein Reformvorschlag für die theoretische Fahrerlaubnisprüfung
(2005)
Der vorliegende Bericht enthält konzeptionelle Vorschläge, wie es künftig unter Einbeziehung moderner Multimediatechnik bei der theoretischen Fahrerlaubnisprüfung besser gelingen soll, Fahrerlaubnisbewerber ohne ausreichende Befähigung zum Führen von Kraftfahrzeugen zu erkennen. Dafür wurden zunächst der einschlägige prüfungstheoretische Wissensstand aufgearbeitet und Gütekriterien für ein neues Prüfungssystem dargestellt. Weiterhin wurden in einer Reihe von europäischen Ländern Recherchen über Innovationen im Prüfungswesen durchgeführt; diesbezügliche Erfahrungen sind in das vorliegende Prüfungskonzept eingeflossen. Die gegenwärtige Praxis der theoretischen Fahrerlaubnisprüfung erscheint aus heutiger Sicht unter inhaltlichen und methodischen Gesichtspunkten als unbefriedigend. Die Kritik am derzeitigen Prüfungssystem lässt sich auch durch die Verwendung von transponierten computergestützten Versionen der bisherigen Prüfbogen nicht beheben. Deshalb wurden im vorliegenden Prüfungskonzept die Systematik und die Merkmale eines grundsätzlich neuen computergestützten Prüfungssystems dargestellt. Weiterhin wurden die zu erwartenden Prüfungsabläufe sowie die rechtlichen, technischen und organisatorischen Bedingungen für die Einführung dieses Systems einschließlich eines begrenzten Vorlaufprojekts skizziert. Um die wissenschaftliche Reflexion der methodischen Qualität des Prüfungssystems zu sichern, wurden auch Vorschläge für die Evaluation der neuen theoretischen Fahrerlaubnisprüfung entwickelt. Die Einführung des vorgeschlagenen Prüfungskonzepts lässt neben weiteren Vorzügen drei wesentliche Verbesserungen im deutschen Prüfungssystem erwarten: Eine engere Verbindung des Ausbildungsund Prüfungssystems soll die Lernmotivation der Fahrerlaubnisbewerber steigern, eine bessere Visualisierung der Prüfungsaufgaben wird die Ähnlichkeit der Prüfungsanforderungen mit realen Verkehrsanforderungen verbessern, und es wird ermöglicht, nicht nur die Qualität der Prüfungsaufgaben an sich zu analysieren, sondern auch die Vorhersagekraft der Prüfungsergebnisse für die spätere Unfall- und Delinquenzbelastung der Fahranfänger im Straßen-verkehr. Der Bericht enthält neben Vorschlägen zur Optimierung der theoretischen Fahrerlaubnisprüfung auch Anregungen zur ergänzenden Weiterentwicklung der praktischen Fahrerlaubnisprüfung.
Ein Ansatz zur Beschleunigung von Bauzeiten und Reduzierung von Sperrdauern lässt sich in der Weiterentwicklung der Kompaktasphaltbauweise sehen. Im Rahmen des Projektes "Bauzeitenverkürzung durch optimierten Asphalteinbau" (BOA) wurden hierzu Konzepte erarbeitet, die den Einbau dicker Asphaltpakete in einem einzelnen Übergang des Fertigers zulassen. Dies erforderte die Konzeption eines neuen Trag-/Binderschichtmischguts AC 45 B/T S, welches in Dicken von 20 bis 22 cm eingebaut, als Unterlage für eine gleichzeitig einzubauende dünne Deckschicht dient und somit typische dreilagige Aufbauten ersetzt. Zudem waren Einbau- und Verdichtungsgeräte an die neue Bauweise anzupassen, sowie Bauprozesse zu optimieren. Erstmals erprobt wurde die neue Bauweise auf Versuchsfeldern. Die Einbauergebnisse waren technisch gleichwertig mit konventionellen Bauweisen. Rechnerische Untersuchungen ergaben zudem eine geringere Ermüdungsanfälligkeit der Kompakt-Asphaltaufbauten. Auf einer Versuchsstrecke an der B 68 konnte nachgewiesen werden, dass die Bauweise auch unter realen Einbaubedingungen umsetzbar ist und eine signifikante Bauzeitenverkürzung bewirkt. Als kritischer Faktor stellte sich die Ebenheit heraus. Die dicken Schichtpakete sind während des Verdichtungsvorganges besonders in den Randbereichen verformungsanfällig, weshalb die Stabilität der Kanten durch Entwicklung neuer Verdichtungsmodule verbessert werden muss.