Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (26)
- Buch (Monographie) (14)
- Arbeitspapier (1)
Volltext vorhanden
- ja (41) (entfernen)
Schlagworte
- Geschwindigkeit (41) (entfernen)
Im Rahmen der wissenschaftlichen Begleitung zum Feldversuch mit Lang-Lkw ist auch eine Untersuchung zu den Sicherheitsauswirkungen im Zusammenhang mit Überholvorgaengen gegen ueber Lang-Lkw durchgeführt worden. Wegen geringer Fallzahlen in der 1. Untersuchung zu Beginn wurde eine 2. Untersuchung gegen Ende des Feldversuchs durchgeführt. Wegen der geringen Anzahl an diesem Feldversuch teilnehmender Lang-Lkw, vor allem aber auch wegen des vorrangigen BAB-Einsatzes von Lang-Lkw und fehlender nennenswerter Streckenabschnitte auf Landstraßen, werden im Rahmen des FE-Vorhabens ausschließlich Messungen bzw. Beobachtungen durchgeführt, die vom Lang-Lkw selbst ausgehen. Mit ihnen wird das Annäherungs-, Ausscher-, Vorbeifahrt- und Einscherverhalten bei Überholvorgängen gegen über Lang-Lkw auf Landstraßen und Autobahnen erfasst. Auch aus den Analysen von über 543 UEberholungen gegen ueber Lang-Lkw (382) bzw. Vergleichs-Lkw (161) in der zweiten Untersuchungsphase lassen sich keine Indizien für ein erhöhtes Risiko beim Überholen von Lang-Lkw erkennen, auch wenn mittlerweile beide Lkw-Arten gleich schnell fahren. Die Verteilung der bei einem Teil dieses Kollektivs aus vollständigen Radar- und Videodaten ermittelten Sicherheitsabstände bei Überholungen von Lang-Lkw ist gegen ueber denen bei Vergleichs-Lkw bei allen relevanten Teilkollektiven günstiger. Auch höhere Beschleunigungen und kürzere Überholwege lassen vermuten, dass sich die Überholenden der Randbedingungen der längeren Lkw bewusst sind und darauf entsprechend reagieren. Da ein generelles Überholverbot für eigene Überholungen durch Lang-Lkw auf BAB zu mehr Doppel- und Mehrfach überholungen f ührt, bei der rechnerisch zu erwartenden Reduzierung von Lkw-Fahrten durch den Einsatz von Lang-Lkw sich die Anzahl der Ausschervorgänge aber nicht vergrössern würde, erscheinen die aufgrund von Mehrfach überholungen möglichen negativen Konsequenzen eines Überholverbots für Lang-Lkw auf Autobahnen grösser als die beabsichtigten Vorteile.
Im Rahmen der wissenschaftlichen Begleitung zum deutschlandweiten Feldversuch mit Lang-Lkw ist auch eine Untersuchung zu den Sicherheitsauswirkungen im Zusammenhang mit Überholvorgängen gegenüber Lang-Lkw sowie deren Räumvorgängen an Knotenpunkten durchgeführt worden. Wegen der geringen Anzahl an diesem Feldversuch teilnehmender Lang-Lkw, vor allem aber auch wegen des vorrangigen BAB-Einsatzes von Lang-Lkw und daher fehlender nennenswerter Streckenabschnitte auf Landstraßen, werden im Rahmen des FE-Vorhabens ausschließlich Messungen bzw. Beobachtungen durchgeführt, die vom Lang-Lkw selbst ausgehen. Mit ihnen wird das Annäherungs-, Ausscher-, Vorbeifahrt- und Einscherverhalten bei Überholvorgängen gegenüber Lang-Lkw auf Landstraßen und Autobahnen erfasst. Aus den Analysen von über 200 Überholungen gegenüber Lang-Lkw bzw. Vergleichsfahrzeugen lassen sich keine Indizien für ein erhöhtes Risiko beim Überholen von Lang-Lkw erkennen. Tendenziell nehmen die geringsten Sicherheitsabstände in ausreichendem Maße zu, die Beschleunigungen bei kritischen Geschwindigkeiten liegen leicht höher. Ansatzpunkte für eine Erhöhung der Sicherheitsrisiken sind auch beim Räumen von Lang-Lkw nicht zu erkennen. Generell ist eine geringere Geschwindigkeit der betrachteten Lang-Lkw und damit eine theoretisch sicherheitsfördernd größere Geschwindigkeitsdifferenz zwischen Überholer und Überholtem zu beobachten. Allerdings würde eine systematisch niedrigere Geschwindigkeit von Lang-Lkw vor allem auf Autobahnen vermutlich zu einer höheren Anzahl an Überholungen durch andere Lkw führen. Auch für den im Dauerbetrieb zu erwartenden Fall gleicher Geschwindigkeiten gibt es keinen Anhaltspunkt, dass erhöhte Sicherheitsrisiken zu erwarten sind: Bei allen Parametern liegen die Werte bei kritischen Überholvorgängen bei Lang-Lkw etwas günstiger als bei den Vergleichsfahrzeugen, so dass die theoretisch wegen der größeren Fahrzeuglänge zu erwartenden Erhöhungen des Risikos mindestens kompensiert würden.
Verkehrsunfälle auf Außerortsstraßen sind im Gegensatz zu Unfällen auf Innerortsstraßen durch eine besonders hohe Unfallschwere gekennzeichnet. Daraus ergibt sich die Notwendigkeit, Ansätze für die Verbesserung der Verkehrssicherheit auf Außerortsstraßen durch bauliche oder nicht bauliche Umsetzungen zu finden, von denen es in Deutschland eine Reihe gibt. Einer dieser Ansatzpunkte ist die Durchsetzung der zulässigen Höchstgeschwindigkeit. Insbesondere bei einbahnig zweistreifigen Außerortsstraßen besitzt die Geschwindigkeit einen großen Einfluss auf die Verkehrssicherheit, da mit steigender Geschwindigkeit nicht nur die Unfallanzahl, sondern besonders die Unfallschwere steigt. Um auf das besorgniserregende Unfallgeschehen auf den Außerortsstraßen mit praktikablen Maßnahmen zu reagieren, hat die Bundesanstalt für Straßenwesen (BASt) 1996 in Abstimmung mit dem Bundesministerium für Verkehr, Bau und Stadtentwicklung (BMVBS) die Projektgruppe "Verbesserung der Verkehrssicherheit auf einbahnig zweistreifigen Außerortsstraßen" (Außerortsstraßensicherheit - AOSI) eingerichtet. Sie soll detaillierte Vorschläge zur kurz- und mittelfristigen Verbesserung der Verkehrssicherheit unterbreiten und deren Wirksamkeit in einem Großversuch (Vorher-Nachher-Untersuchung) auf ausgewählten Strecken überprüfen. Im Jahr 2004 wurde die TU Dresden im Rahmen der dritten Projektphase mit der Untersuchung der Auswirkungen von linienhaft angeordneten ortsfesten Geschwindigkeitsüberwachungsanlagen (AOSI - Teil 3) beauftragt. Es umfasste die vollständige Durchführung und Auswertung der Wirksamkeit dieses Maßnahmenpaketes der linienhaft angeordneten Überwachungsanlagen (OGÜ-Anlagen) und die Formulierung von Empfehlungen für den künftigen Einsatz. Inhalt der Studie waren eine Analyse des Geschwindigkeitsniveaus sowie Untersuchungen zum Unfallgeschehen auf den auf den AOSI-Streckenabschnitten im Vorher-Nachher-Vergleich sowie Akzeptanzuntersuchungen. Der Bericht fasst die Methodik aus diesem Projekt sowie aus den Untersuchungen zu den Strecken mit Überholfahrstreifen (UEFS) kurz zusammen. Die Ergebnisdarstellung beschränkt sich jedoch ausschließlich auf das Maßnahmenpaket der linienhaft, ortsfesten Geschwindigkeitsüberwachung, da die Untersuchungen zu den ÜFS-Strecken noch nicht abgeschlossen sind. Die Studie ergab, dass das Geschwindigkeitsniveau auf den untersuchten Abschnitten vor Inbetriebnahme der OGÜ-Anlagen mit teilweise bis zu 20 km/h erheblich über der zulässigen Geschwindigkeit lag. Durch die Inbetriebnahme verringerte sich das Geschwindigkeitsniveau auf allen Strecken in Richtung des zulässigen Niveaus. Querschnitte, bei denen vorher sehr hohe Überschreitungen gemessen wurden, hatten die größten Geschwindigkeitsrückgänge. Nach einiger Zeit der Gewöhnung (circa 2 Jahre) fand eine Harmonisierung der Geschwindigkeiten statt, sodass die Geschwindigkeitsdifferenzen vor und nach den OGÜ-Anlagen geringer wurden. Die Akzeptanzuntersuchungen zeigten, dass die Mehrheit der Befragten mit einem Einsatz solcher Anlagen zur Verbesserung der Verkehrssicherheit einverstanden ist. Einfluss auf die Akzeptanz haben die Streckengeometrie und die beschilderte zulässige Höchstgeschwindigkeit. Ohne Einfluss waren die Vorankündigung durch Hinweisschilder, das Alter und das Geschlecht der Kraftfahrer sowie die Häufigkeit der Streckennutzung. Bei der Unfalluntersuchung ergab sich, dass sowohl die Schwere als auch die Gesamtzahl der Unfälle durch die Durchsetzung der zulässigen Höchstgeschwindigkeit erheblich vermindert werden konnte. Die linienhafte Geschwindigkeitsüberwachung hat damit das Unfallrisiko auf solchen Abschnitten, die vorher durch ein besonders hohes Unfallgeschehen aufgefallen waren, zum Teil erheblich gesenkt. Weiterhin wurde das Kosten-Nutzen-Verhältnis der OGÜ-Anlagen auf den jeweiligen Strecken analysiert. Der Einsatz von OGÜ-Anlagen kann besonders auf Bestandsstrecken mit einem überhöhten Geschwindigkeitsniveau und einem linienhaft auffälligen Unfallgeschehen (besonders Fahrunfälle mit schweren Personenschäden) empfohlen werden. Ausprägungen der Streckencharakteristik, die auf einen Einsatz hindeuten, werden genannt und es werden Empfehlungen zur Umsetzung der Maßnahme gegeben.
In diesem Bericht werden die Ergebnisse des Forschungsprojektes FE 84.0104/2009/ mit dem Titel "Untersuchung des Einflusses der Grobtextur auf Messergebnisse mit dem SKM-Messverfahren", das am Institut fuer Fahrzeugsystemtechnik (FAST) des Karlsruher Instituts für Technologie (KIT) im Auftrag der Bundesanstalt für Straßenwesen (BASt) durchgeführt wurde, vorgestellt. Dieses Forschungsprojekt hatte das Ziel, den Einfluss der Grobtextur (Makrotextur) auf die Geschwindigkeitsabhängigkeit und Temperaturabhängigkeit des SKM-Griffigkeitswertes zu untersuchen. Es wird die Funktionsweise des am Institut entwickelten und aufgebauten Griffigkeits- und Abriebprüfstand (GAT) erklärt. Mit diesem Prüfstand können Griffigkeitsversuche auf Fahrbahnproben durchgeführt werden. Weiterhin wird ein neu entwickeltes Abdruckverfahren füer die Herstellung von Fahrbahnabdrücken vorgestellt. Mit diesem können Fahrbahnabdrücke von realen Fahrbahnproben erzeugt werden. Durch eine Erweiterung des vorgestellten Abdruckverfahrens können des Weiteren Fahrbahnproben mit definierten künstlichen Makro- und künstlichen Mikrotexturen erzeugt werden. Somit können am GAT Griffigkeitsversuche auf realen Fahrbahnproben, aber auch auf speziell hergestellten Fahrbahnabdrücken durchgeführt werden. Mit der Kombination aus GAT und dem vorgestellten Abdruckverfahren kann der Einfluss der Fahrbahngrobtextur auf die Griffigkeit unabhäengig vom Materialeinfluss betrachtet werden. Abschließend werden die Ergebnisse der Griffigkeitsversuche, die am Griffigkeits- und Abriebprüfstand durchgeführt wurden, vorgestellt. Diese Ergebnisse werden mit Griffigkeitsversuchen am Innentrommelprüfstand des Institutes und mit SKM-Messdaten, die mit einem SKM-Messsystem auf der Straße gemessen wurden, verifiziert. Die ermittelten Ergebnisse zeigen, dass die Geschwindigkeitsabhängigkeit von der Fahrbahnmakrotextur beeinflusst wird. Zusätzlich muss jedoch auch der Einfluss der Fahrbahnmikrotextur berücksichtigt werden, da immer die Kombination aus Makro- und Mikrotextur für die Geschwindigkeitsabhängigkeit von Bedeutung ist. Der Einfluss der Fahrbahnmakrotextur auf die Temperaturabhängigkeit des SKM-Wertes konnte innerhalb dieses Forschungsprojektes nicht abschließend untersucht werden, da bei den durchgeführten Griffigkeitsversuchen am GAT mit den verwendeten Fahrbahnabdrücken Temperatureffekte auftraten, die zukünftig noch weiter analysiert werden müssen.
Tree impacts are still one of the most important focal points of road deaths in Germany. For the year 2008, the latest figures in the national statistics show a share of 28% of road users killed in crashes with trees alongside a road amongst all crashes on rural roads (except the Autobahn). The official German statistics show the attribute "impact on a tree" since 1995. For this first reported year, the share of road users killed in such crashes was 30%. During the last 14 years, fatal accidents with road users killed on rural roads (except the Autobahn) after impacts on a tree declined by 60% from 1,737 (year 1995) to 696 (year 2008). But this is more or less in line with the general evolution of vehicle and traffic safety in Germany. For Germany as a whole the accident statistics do not show a reduction for "treer crashes" which is clearly more than the average for all accidents. But, as shown with the paper, there are different evolutions in the several German States. In public awareness the topic "tree impacts" is mostly associated with the situation in Germany after the reunification. At that time a lot of road users were killed on the avenues in the so called "new countries". The fact that "tree impacts" are still a big share within the figure of killed road users seems to be little-known. Using updated information coming from the official statistics and in-depth-studies, accident researchers can identify a big potential for further improvements of traffic safety on the associated district roads, state roads and federal highways. There is still a need to analyse more details of the accident occurrence with impacts on trees to generate new and updated findings on the current limits and potentials of measures to improve vehicle and traffic safety. To make further efforts in reducing the figures of victims of "tree impacts" the intensification of well-known conventional solutions " for example implementation of guard rails and reduction of speed - is an option. Measures related to vehicle safety technology especially in the field of primary (active) safety will have additional benefit within the physically imposed limits. With this background it can be seen that the subject "tree impacts" should be analysed with a holistic approach taking into account the entire system of driver, vehicle, road, the environment and a social consensus as well.
This study is aimed to investigate the correlations of impact conditions and dynamic responses with the injuries and injury severity of child pedestrians by accident reconstruction. For this purpose, the pedestrian accident cases were selected from Sweden and Germany with detailed information about injuries, accident cars, and accident environment. The selected accident cases were reconstructed using mathematical models of pedestrian and passenger car. The pedestrian models were generated based on the height, weight, and age of the pedestrian involved in accidents. The car models were built up based on the corresponding accident car. The impact speeds in simulations were defined based on the reported data. The calculated physical quantities were analyzed to find the correlation with injury outcomes registered in the accident database. The reconstruction approaches are discussed in terms of data collection, estimating vehicle impact speeds, pedestrian moving speeds and initial posture, secondary ground impact, validity of the mathematical models, as well as impact biomechanics.
Small overlap frontal crashes are defined by a damage pattern with most of the vehicle deformation concentrated outboard of the main longitudinal structures. These crashes are prominent among frontal crashes resulting in serious and fatal injuries, even among vehicles that perform well in regulatory and consumer information crash tests. One of the critical aspects of understanding these crashes is knowing the crash speeds that cause the types of damage associated with serious injuries. Laboratory crash tests were conducted using 12 vehicles in three small overlap test conditions: pole, vehicle-to-vehicle collinear, and vehicle-to-vehicle oblique (15-degree striking angle). Field reconstruction techniques were used to estimate the delta V for each vehicle, and these results were compared with actual delta V values based on vehicle accelerometer data. Estimated delta Vs were 50% lower than actual values. Velocity change estimates for small overlap frontal crashes in databases such as NASS-CDS significantly underestimate actual values.
The aim of this study was to evaluate the performance and accuracy of Event Data Recorders (EDRs). The analysis was based on J-NCAP crash tests from 2006"2007, with the corresponding EDR datasets. The pre-crash velocity, maximum delta-V and delta-V versus time history data recorded in the EDRs were compared with the reliable crash test data. The difference between the EDR pre-crash velocity and the laboratory test speed was less than 4 percent. In contrast, in several cases the maximum delta-V and delta-V versus time history data obtained from the EDRs showed uncertainty of measurement in comparisons with the reliable delta-V data. The difference in maximum delta-V in these comparisons was more than 5 percent in 10 of 14 tests and more than 10 percent in 4 of 14 tests. The EDRs underestimated the maximum delta-V in almost all tests. It was also concluded that the calculated acceleration from the EDR delta-V versus time history data showed good agreement with the instrumented accelerometer signal during the collision in almost all tests.
The main focus of the benefit estimation of advanced safety systems with a warning interface by simulation is on the driver. The driver is the only link between the algorithm of the safety system and the vehicle, which makes the setup of a driver model for such simulations very important. This paper describes an approach for the use of a statistical driver model in simulation. It also gives an outlook on further work on this topic. The build-up process of the model suffices with a distribution of reaction times and a distribution of reaction intensities. Both were combined in different scenarios for every driver. Each scenario has then a specific probability to occur. To use the statistical driver model, every accident scene has to be simulated with each driver scenario (combinations of reaction times and intensities). The results of the simulations are then combined regarding the probabilities to occur, which leads to an overall estimated benefit of the specific system. The model works with one or more equipped participants and delivers a range for the benefit of advanced safety systems with warning interfaces.
In a first step, we have examined approximately 23 000 single vehicle accidents within the Austrian National Statistics database. In a second step, we considered 15% of all fatal "running off the road" accidents that occurred in Austria in 2003. As a result, two accident categories were specified; "leaving the road without preceding manoeuvre" and "leaving the road with preceding manoeuvre". These two categories can be basically characterised by the vehicle- heading angle and its velocity angle. In this report, we further suggest theoretical approaches for the dimensioning of a safety zone, an area adjacent to the road free of fixed objects or dangerous slopes. We also show the link between the two accident categories mentioned above and the real world accidents analysed in detail. These observations also form the basis for the required length for safety devices. Finally, we summarise accident avoidance strategies.
Rollover scenarios in Europe
(2005)
Rollover accidents seem to be a rising problem in Europe and therefore the systematic of this accident scenario should be investigated. Based on statistical investigations on major European accident databases for different countries a series of 73 real world rollover accidents was analysed. These cases were reconstructed using PC-Crash and preliminary categorised using a modified USbased rollover classification. In a first step, the rollover events were reconstructed from the point of conflict to the vehicle- rest position. The vehicles kinematics as well as its linear and rotational velocities were derived. In a second step typical velocity characteristics as well as kinematics were identified and the events categorised according to these criteria. Based on these results four main categories were defined, covering all reconstructed accidents. This categorisation was based on mechanical parameters (rotatory and translator kinematical data of the vehicle). Significant differences can be seen for different scenarios for the "first phase of rollover".
Relevant accident related factors : risk and frequencies of contributing to road traffic accidents
(2009)
In the course of the European Project TRACE (Traffic Accident Causation in Europe) an attempt was made to analyse the cause of road traffic accidents from a factors' point of view. By literature review the most important independent risk factors for traffic accidents were identified to be speed, alcohol intake, male gender, young age, cell phone use, and fatigue. However, the impact of an accident related factor also depends on its prevalence in traffic and accidents, respectively. Available to the Partners in the TRACE Project were different accident databases. Causally contributing factors found by accident investigations that are most often coded in accident databases are connected to unadapted speed and inattention. Taking into account the risk increase and the frequency of contribution to accidents the conclusion can be drawn that the most relevant factors for accident causation are: "alcohol", "speed", and "inattention and distraction".
Bone fracture patterns could be crucial in reconstructing the nature of loading, especially in the lower limb and upper limb kinematics in vehicle-pedestrian crashes. In addition, use of FE bone models can be a handy tool to predict vehicle impact velocity and the impact direction. The point of fracture initiation in bone loading has been predicted quite accurately earlier. A methodology that predicts bone crack initiation and its propagation pattern for the six known loading directions using a single material and failure model is presented.
This paper describes the methodology of In-Depth Investigation in Germany on the example of GIDAS (German In-Depth Accident Study). Since 1999 in Germany a joint project between FAT (Forschungsvereinigung Automobiltechnik or Automotive Industry Research Association) and BASt (Bundesanstalt für Straßenwesen or the Federal Road Research Institute) is being carried out in Hannover and Dresden. The methodology of this project is based on a statistically orientated procedure of data sampling (sampling plan, weighting factors). The paper describes the possibilities of such in-depth investigation on the results of the offered title. The accident cases were collected randomly within GIDAS at Hannover. There are more cases existing from previous investigation started in 1985 under the same methodology. The portion of rollovers can be established at 3.7% of all accidents with casualties in the year 2000. For the study 434 cases of car accidents with rollovers are used for a detail comprehensive analysis. The accidents happened in the years 1994 to 2000 in the Hannover area. The injury distribution will report about 741 occupants with rollover accident event. The presented paper will give an overview of the accident situations following in rollover movements of cars. The distributions of injury frequencies, injury severity AIS for the whole body and for the body regions of occupants will be presented and compared to technical details like the impact speed and the deformation pattern. The speed of the car was determined at the point of rollover and on the point of accident initiency. The characteristics of the kinematics followed in a rollover movement are analyzed and the major defined types of rollover will be shown in the paper. The paper will describe the possibilities of In-Depth Investigation methods for the approach of finding countermeasures on the example of car accidents with rollover and explaining the biomechanics of injuries in rollover movements.
Es wurde anhand einer ersten Auswertung der Messdaten an der autobahnähnlichen B10 bei Karlsruhe und anhand einer Systematisierung weiterer zugänglicher PM10-Messergebnisse an Straßen im Anwendungsbereich des Merkblattes über Luftverunreinigungen an Straßen (MLuS 02) eine bessere Anpassung des existierenden Verfahrens zur Berechnung verkehrsbedingter PM10-Emissionen im Sinne einer schnell verfügbaren pragmatischen Zwischenlösung für diese Straßen erarbeitet. Mittels der NOx-Tracermethode konnten für die B10 bei Karlsruhe PM10-Emissionsfaktoren abgeleitet werden. Diese betragen im Wochenmittel 81 mg/(km Fzg), wobei an trockenen Werktagen 92 mg/(km Fzg) und an trockenen Sonntagen 59 mg/(km Fzg) ermittelt wurden. Anhand der Auswertung der Inhaltsstoffanalysen wurde u.a. abgeschätzt, dass an trockenen Werktagen ca. 50 % der PM10-Emissionen durch Auspuffemissionen realisiert werden, ca. 20 % durch Reifenabrieb, weniger als 1 % durch Bremsabriebe und ca. 30 % durch Straßenabriebe sowie Wiederaufwirbelung von Schmutzeintrag. Es wurde in diesen Überlegungen angenommen, dass sich die PM10-Emissionen einer Straße aus den Emissionen des Auspuffs sowie dem Anteil aus Abrieb und dem der Aufwirbelung infolge Reifen-, Brems-, Kupplungsbelags- und Straßenabrieb sowie Straßenstaub zusammensetzen. Dabei werden die Emissionen aus dem Auspuff bestimmt nach dem Handbuch für Emissionsfaktoren des Umweltbundesamtes (HBEFA). Die Emissionen für Abrieb und Aufwirbelung wurden auf Basis von aus vorliegenden Messergebnissen abgeleiteten Emissionsfaktoren (getrennt nach PKW und LKW) berechnet. Entsprechende Emissionsfaktoren werden angegeben. Unterschieden wird nach nicht überdeckelten Straßen und Tunnelstrecken. Für Tunnelstrecken, auf denen die Emissionen offenbar geringer sind als auf offenen Straßen, werden niedrigere PKW-Emissionsfaktoren angesetzt als für Straßen auf freier Strecke. Unterschieden wird auch weiterhin in Straßen mit gutem bzw. schlechtem Straßenzustand. Eine eindeutige Geschwindigkeitsabhängigkeit konnte aus den verfügbaren Daten nicht abgeleitet werden. Auch die Regenabhängigkeit ist weiterhin nicht eindeutig geklärt. Für die Bestimmung der Kurzzeitbelastung nach 22. BImSchV für PM10 und CO wurde auf Basis der Auswertung von Messdaten ein statistischer Zusammenhang abgeleitet für die Berechnung der Anzahl von Überschreitungen von 50 -µg PM10/m-³ als Tagesmittelwert beziehungsweise zur Bestimmung des maximalen gleitenden CO-8h-Wertes aus dem jeweiligen Jahresmittelwert. Der Bericht wurde um eine Zusatzuntersuchung zum Vergleich der PM10-Konzentrationen aus Messungen an der A1 bei Hamburg und Ausbreitungsberechnungen erweitert. Diese Zusatzuntersuchung enthält als Anhänge eine Fehlerdiskussion, eine Darstellung des Berechnungsverfahrens PROKAS zur Bestimmung verkehrserzeugter Schadstoffbelastungen sowie die MLuS 02-Protokolle zum PC - Berechnungsverfahren zur Abschätzung von verkehrsbedingten Schadstoffimmissionen nach dem Merkblatt über Luftverunreinigungen an Straßen der Forschungsgesellschaft für Straßen- und Verkehrswesen, Version 5.0j vom 26.02.2002.
Pedestrian accidents are one of the major concerns related with road accidents around the world. Portugal has one of the highest rates of pedestrian fatalities in Europe. In this paper an overview conditions were the pedestrian accidents occurred in Portugal is presented. In the last years, a project related with the pedestrian accidents has run in Portugal for the period 2004-2006 where 603 people died, 2097 have been severely injured and about 17000 slightly injured. Within this project all the pedestrian accidents in this period have been analysed providing global information about a wide range of aspects, since location, driver and pedestrian characteristics, weather and road conditions, among others. In addition, 50 in-depth accidents have been investigated and the data collected according the Pendant methodology. For this in-depth methodology detailed information about the accident has been collected, including injuries, vehicle damage, road conditions and road user- behaviour and actions. An accident reconstruction has been carried for each case including the determination of the speeds and driver actions, and the analysis of the contributing factors for the accident. Depending of the accident complexity, different methodologies have been used to analyse these accident, from the classical analytical equations such as Simms and Woods, to the use of detailed computational pedestrian models as those included in the commercial software- PC-Crash-® or Madymo-®. Also one of the goals of our investigation is the development of multibody models and methodologies for the reconstruction of pedestrian accidents. Some of these tools integrated in the commercial software Cosmos Motion-® are presented. The advantages of the different approaches are compared and discussed for some of the accidents investigated. With these tools the impact speed can be determined from the projection distance with analytical tools or PC-Crash-®, but more complex tools should be used to determine speed from the injuries, what is especially important for fatal accidents. The influence of the vehicle geometry and stiffness characteristics is another aspect analysed, where the influence of the vehicle stiffness has been determined using a combined multibody-finite elements approach within the software Madymo-®.
Motorcycle crashes in Austria: Analysis of causes and contributing factors based on in-depth data
(2017)
From CEDATU, the in-depth accident database run by the Vehicle Safety Institute at Graz University of Technology, a representative sample of 101 crashes involving at least one motorcycle was selected. The analysis focused on causes for crashes as well as on contributing factors, but also included parameters of road, riders and vehicles. Own riding speed and "unexpectable action by another road user" were the most frequent causes for accidents. Inappropriate safety distance or delayed reaction were frequent, both as causation factors and as contributing factors. Infrastructure issues never cause an accident, but they are very frequent as contributing factors; road geometry and road guidance are by far most frequent among these. This paper also discusses accidents by type and other parameters (e.g. injury severity by body region, collision speed, age and others), and compares accident causes to previous studies as well as the police reported accident statistics.
Pedestrian and cyclist are the most vulnerable road users in traffic crashes. One important aspect of this study was the comparable analysis of the exact impact configuration and the resulting injury patterns of pedestrians and cyclists in view of epidemiology. The secondary aim was assessment of head injury risks and kinematics of adult pedestrian and cyclists in primary and secondary impacts and to correlate the injuries related to physical parameters like HIC value, 3ms linear acceleration, and discuss the technical parameter with injuries observed in real-world accidents based documented real accidents of GIDAS and explains the head injuries by simulated load and impact conditions based on PC-Crash and MADYMO. A subsample of n=402 pedestrians and n=940 bicyclists from GIDAS database, Germany was used for preselection, from which 22 pedestrian and 18 cyclist accidents were selected for reconstruction by initially using PC-Crash to calculate impact conditions, such as vehicle impact velocity, vehicle kinematic sequence and throw out distance. The impact conditions then were employed to identify the initial conditions in simulation of MADYMO reconstruction. The results show that cyclists always suffer lower injury outcomes for the same accident severity. Differences in HIC, head relative impact velocity, 3ms linear contiguous acceleration, maximum angular velocity and acceleration, contact force, throwing distance and head contact timing are shown. The differences of landing conditions in secondary impacts of pedestrians and cyclists are also identified. Injury risk curves were generated by logistic regression model for each predicting physical parameters.
In-depth accident investigation offers many advantages for the analysis and comprehension of crash mechanisms. IFSTTAR makes such investigations since 1992 without interruption. The corresponding database contains more than 1200 accident case studies. Currently, in-depth accident investigation is one of the best ways to determine the speed or cars involved in accidents. This paper first presents the methods used for accident investigation and for accident kinematic reconstruction. Then, in order to illustrate the interest and possible applications of such accident data, it shows some results from a recent study based on the IFSTTAR in-depth accident study programme (IDAS) and dealing with the link between travelling speed and accident risk.
The purpose of this work is to investigate the association between the injuries in motorcycle accident and the main accident configurations. The data were provided by a multicentric case-control study MAIDS regarding the risk of crash and injuries of motorcyclists. Chi-square test was used to evaluate the relationship between the variables and a logistic regression was performed to evaluate the association of injury severity with some variables supposed to be predictive factors. Lesive patterns characterized by internal haemorrhages are mainly associated with fronto-lateral crashes, above all in urban areas. Lacerations or abrasions, mainly reported in torso and lower extremities, are mostly associated with single crashes or accidents in queue also for crashes occurred to low speed (< 50 km/h). The severity of injuries is highly associated with impact speed, regardless of the crash configuration. Fractures and haemorrhages play an important role in determining the severity of injuries. The upper extremities are the most frequently traumatised anatomic areas.