Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
Schlagworte
- Europe (42) (entfernen)
Institut
- Sonstige (42) (entfernen)
Despite the steadily declining number of pedestrian fatalities and injuries in most European countries during recent decades, pedestrian protection is still of great importance in the European Union as well as in Germany. This is because they still constitute a large proportion of road user casualties and are more likely to suffer serious and fatal injuries than most other road users. In 1999 only car occupants suffered more fatal injuries than pedestrians in Germany. In December 1998, EEVC WG 17 completed their review and updating of the EEVC WG 10 pedestrian test procedure that made it possible to evaluate the protection afforded to pedestrians by the front of passenger cars in an accident. Within the scope of this procedure, four different impactors are used representing those parts of the body which are injured very often and/or very seriously in vehicle-pedestrian-collisions. In a project executed by IKA and BASt, a small family car was tested according to the EEVC WG 17 test procedure. Afterwards modifications to the car were carried out in order to improve the pedestrian protection provided by the vehicle design. There were certain restrictions placed on the level of modifications undertaken, e.g. only minor modifications to vehicle styling and to the vehicle structures, which provide passenger protection. The redesigned vehicle was tested again using the WG 17 test procedure. The test results of the modified vehicle were compared with those of the standard vehicle and evaluated. The results show that considered measures for pedestrian protection in many areas of the vehicle front structure and the use of innovative techniques can lead to a significant reduction of the loads of pedestrians at an acceptable expense.
FERSI ist eine internationale Gemeinschaft von Forschungsinstituten, die das gemeinsame Interesse an der wissenschaftlichen Forschung zur Verbesserung der Verkehrssicherheit verbindet. Nach über 10-jähriger, erfolgreicher Zusammenarbeit ist FERSI bestrebt, weiterhin einen wichtigen Beitrag der Forschung zur Lösung der Verkehrssicherheitsprobleme in Europa zu gewährleisten. Die Hauptziele von FERSI sind der internationale Erfahrungsaustausch, die Kooperation der Forschungsinstitute, die wissenschaftliche Unterstützung bei der ständigen Verbesserung der Straßenverkehrssicherheit sowie die Entwicklung und Durchführung gemeinsamer europäischer Forschungsprojekte zur Lösung von Straßenverkehrssicherheitsproblemen.
Umstellung der bautechnischen Bestimmungen im Brücken- und Ingenieurbau auf europäische Regelungen
(2002)
Der im November 1996 gefasste Beschluss des Bau-Koordinierungs-Normenaussschusses (NA) 07.1 "Brücken" nach einer baldmöglichen Anwendung der Eurocodes im Brückenbau wird nach Durchführung umfangreicher Vorarbeiten voraussichtlich Mitte 2002 mit der verbindlichen Einführung von DIN-Fachberichten verwirklicht werden. Seit Mitte 2001 stehen DIN-Fachberichte für die Bemessung und Konstruktion von Brücken- und Ingenieurbauwerken zur Verfügung, die in einer Erprobungsphase von etwa einem Jahr auf ihre Anwendbarkeit geprüft werden. Dies geschieht insbesondere anhand verschiedener Pilotprojekte. Die daraus gewonnenen Erfahrungen fließen in eine Fortschreibung der DIN-Fachberichte ein und sollen auch für die weitere Bearbeitung der Eurocodes bei CEN zur Verfügung gestellt werden. Gleichzeitig werden die zugehörigen vertraglichen Regelungen in den Zusätzlichen Technischen Vorschriften (ZTV) überarbeitet und zu einer ZTV-ING zusammengefasst. Die DIN-Fachberichte basieren auf den einschlägigen Eurocodes in der ENV-Fassung und den zugehörigen Nationalen Anwendungsdokumenten. Sie sind eine Zusammenfassung aller relevanten Regelungen aus den verschiedenen Eurocodes, nationalen Anpassungen und weiterhin gültigen nationalen Bestimmungen.
Das von der Generaldirektion (DG) XII der Kommission der EU geförderte Projekt umfasst drei Teile: (1) Eine Literaturstudie über mechanische Prüfungen an Gesteinskörnungen, die ergab, dass bei der Festigkeit der Los Angeles-Versuch als Referenzverfahren für Widerstand gegen Zertrümmerung geeignet ist. (2) Eine Serie von Ringanalysen (1993 bis 1997), die 20 Prüfverfahren zu 21 Eigenschaften von Gesteinskörnungen umfasste, unter Beteiligung von rund 50 europäischen Prüfstellen. Zu 19 Ringanalysen wurden ausführliche Berichte erstellt, die eine Beschreibung des Ringversuchs, eine statistische Auswertung einschließlich Versuchsergebnissen und die gewonnenen Präzisionsangaben enthielten. Die Berichte schlugen für einige Verfahren Verbesserungen vor und ermöglichten jeder teilnehmenden Prüfstelle, die eigene Leistung zu kontrollieren. Ein Ringversuch zur Petrographie wurde beschreibend ausgewertet. Ein Überblick über die Prüfverfahren mit dem Versuch einer Wertung ihrer Präzision wurde gegeben: Verfahren mit zufriedenstellender Genauigkeit wurden ebenso aufgezeigt wie solche, bei denen noch Schwierigkeiten vorhanden sind. Faktoren, die zur Streuung der Ergebnisse beitragen, wurden diskutiert und mögliche Verbesserungen vorgeschlagen. (3) Eine Studie über Probenahme unter unterschiedlichen Bedingungen untersuchte den Probenahmefehler, der durch Schwankungen der Produktion sowie durch die Probenahme selbst verursacht wird. 22 Probenahmen, von Transportbändern und verschiedenartigen Halden, die meisten in der Praxis vorkommenden Fälle umfassend, wurden durchgeführt. Die Proben unterschieden sich in Größtkorn, Kornabstufung und Art der Gesteinskörnung. An ihnen wurden insgesamt 575 Siebungen und 958 Ausleseversuche ausgeführt. Die Ergebnisse zeigten, dass, wenn der Probenahmefehler den Fehler des Prüfverfahrens nicht überschreiten soll, Sammelproben aus mindestens 15 Einzelproben bestehen sollten. Im Falle der Probenahme vom Band, die zu bevorzugen ist, stellt eine große Einzelprobe eine annehmbare Alternative dar, sofern die Produktion die Zusammensetzung der Körnung gut kontrolliert.
When the EEVC proposed the full-scale side impact test procedure, it recommended that consideration should be given to an interior headform test in addition. This was to evaluate areas of contact not assessed by the dummy. EEVC Working Group 13 has been researching the parameters of a possible European headform test procedure in four phases. Earlier stages of the research have been presented at previous ESV conferences. The conclusions from these have suggested that the US free motion headform should be used in any European test procedure and that it should be a free flight test, not guided. This research has now culminated in proposals for a European test procedure. This paper presents the proposed EEVC side impact interior headform test procedure, giving the rationale for the test and the first results from the validation phase of the test protocol.
The European Enhanced Vehicle-safety Committee wants to promote the use of more biofidelic child dummies and biomechanical based tolerance limits in regulatory and consumer testing. This study has investigated the feasibility and potential impact of Q-dummies and new injury criteria for child restraint system assessment in frontal impact. European accident statistics have been reviewed for all ECE-R44 CRS groups. For frontal impact, injury measures are recommended for the head, neck, chest and abdomen. Priority of body segment protection depends on the ECE-R44 group. The Q-dummy family is able to reflect these injuries, because of its biofidelity performance and measurement capabilities for these body segments. Currently, the Q0, Q1, Q1.5, Q3 and Q6 are available representing children of 0, 1, 1.5, 3 and 6 years old. These Q-dummies cover almost all dummy weight groups as defined in ECE-R44. Q10, representing a 10 year-old child, is under development. New child dummy injury criteria are under discussion in EEVC WG12. Therefore, the ECE-R44 criteria are assessed by comparing the existing P-dummies and new Q-dummies in ECE-R44 frontal impact sled tests. In total 300 tests covering 30 CRSs of almost all existing child seat categories are performed by 11 European organizations. From this benchmark study, it is concluded that the performance of the Q-dummy family is good with respect to repeatability of the measurement signals and the durability of the dummies. Applying ECE-R44 criteria, the first impression is that results for P- and Q-dummy are similar. For child seat evaluation the potential merits of the Q-dummy family lie in the extra measurement possibilities of these dummies and in the more biofidelic response.
At the 2005 ESV conference, the International Harmonisation of Research Activities (IHRA) side impact working group proposed a 4 part draft test procedure, to form the basis of harmonisation of regulation world-wide and to help advances in car occupant protection. This paper presents the work performed by a European Commission 6th framework project, called APROSYS, an further development and evaluation of the proposed procedure from a European perspective. The 4 parts of the proposed procedure are: - A Mobile Deformable Barrier test; - An oblique Pole side impact test; - Interior headform tests; - Side Out of Position (OOP) tests. Full scale test and modelling work to develop the Advanced European Mobile Deformable Barrier (AE-MDB) further is described, resulting in a recommendation to revise the barrier face to include a bumper beam element. An evaluation of oblique and perpendicular pole tests was made from tests and numerical simulations using ES-2 and WorldSID 50th percentile dummies. It was concluded that an oblique pole test is feasible but that a perpendicular test would be preferable for Europe. The interior headform test protocol was evaluated to assess its repeatability and reproducibility and to solve issues such as the head impact angle and limitation zones. Recommendations for updates to the test protocol are made. Out-of-position (OOP) tests applicable for the European situation were performed, which included additional tests with Child Restraint Systems (CRS) which use is mandatory in Europe. It was concluded that the proposed IHRA OOP tests do cover the worst case situations, but the current test protocol is not ready for regulatory use.
Learner drivers are readied for their participation in motorised transport within the framework of specific, internationally-diverse preparation systems. These systems are historically developed and are characterised by country-specific economic, infrastructural, legal and cultural circumstances. With the aid of functionally-distinguishable teaching and learning methods as well as testing methods, a conceptual framework was created whilst drawing upon research-methodological approaches of comparative political science as well as teaching and learning principles that facilitated a description and analysis of the systems for a comparative observation to be performed. The systems for the preparation of learner drivers in 44 countries are illustrated in the report. The descriptions are based upon surveys of experts from various institutions (ministries of transport, driving instructor associations, testing organisations) as well as upon literary and Internet research. Alongside European countries with a traditional formal driver training, \"Graduated Driver Licensing\" systems that are primarily encountered in English-speaking countries were also taken into account when selecting the countries. They are characterised by the guarantee of gaining comprehensive driving experience under reduced risk conditions in the form of supervised driving prior to the start of independent driving as well as protective special rules for learner drivers whilst gaining further driving experience during the initial phase of independent driving. The results enable a detailed insight into the country-specific structure of learner driver preparation with the components of the formal driver training in driving schools, informal teaching and learning methods such as supervised driving, the driving tests that must be successfully completed as well as legal frameworks and quality assurance measures. The functionality of system components and architectures shall be discussed against the backdrop of evaluation findings regarding the effectiveness in terms of safety.
This paper will outline ETSC's contribution to the European Union's road safety policy 2011-2020. It will present some of the main recommendations from ETSC's Blueprint for the 4th Road Safety Action Programme and will introduce the response to the European Commission's Road Safety Policy Orientations 2011-2020 (published July 2010). The second framework document presented is the Transport White Paper (published March 2011). The paper will focus on new targets and the new vision set for Europe's Road Safety policy picking out some issues in particular such as traffic law enforcement and the protection of vulnerable road users. It will argue that by reinforcing the current Road Safety Policy Orientations, the EU will be better placed to reach its new ambitious goal of halving road deaths by 2020 and the longer term zero casualty vision.
Police records about traffic accidents like used by IRTAD (International Road Traffic and Accident Database) and CARE (Community Road Accident Database) do not represent all road injuries. For instance, road accidents of bicyclists without a counterpart are usually not reported. Furthermore, IRTAD-like data contains hardly any information on injury outcome and accident circumstances. This information gap leads to an under-representation of the safety concerns of the most vulnerable road users like children and the elderly both in accident research and safety promotion. Injury registration for the European Injury Database (IDB), in turn, combines details of accident causation with diagnostic information that can be used to assess injury severity and long term consequences. The IDB is collecting data from hospital emergency department patients and is being implemented in a growing number of countries. In this article IDB results on mode of transport and injury outcome are presented from a sample of nine EU member states.
The European CASPER (Child Advanced Safety Project for European Roads) project studying car child safety includes a sociological approach in order to have a better understanding of the behaviour of parents driving children under 12 years old. A questionnaire was distributed via the internet in Europe with 998 parents (representing 1638 children) from 22 European countries responding. The results inform on the way parents secure their children during a car trip. Many parents did not control how their children were installed in the child restraint system (CRS). A toddler was more likely to travel into a child seat than an older child was. Regarding misuse situations, an important part of the participants did not think that they could make mistakes when fixing the child seat to the car (26%) or when placing the child into the seat (39%). This leaves an important field of action especially by communication via different media and in the CRS sale outlets.
Fahranfänger werden im Rahmen spezifischer, international unterschiedlich ausgestalteter Vorbereitungssysteme auf die motorisierte Verkehrsteilnahme vorbereitet. Diese Systeme sind historisch gewachsen und von länderspezifischen ökonomischen, infrastrukturellen, rechtlichen und kulturellen Gegebenheiten geprägt. Für eine vergleichende Systembetrachtung wurde unter Rückgriff auf forschungsmethodische Ansätze der Vergleichenden Politikwissenschaft und lehr-lerntheoretische Grundlagen ein begrifflicher Rahmen erarbeitet, der eine Systembeschreibung und -analyse anhand funktional unterscheidbarer Lehr-Lernformen und Prüfungsformen ermöglicht. Im Bericht werden die Systeme der Fahranfängervorbereitung von 44 Ländern dargestellt. Die Beschreibungen basieren auf Befragungen von Experten verschiedener Institutionen (Verkehrsministerien, Fahrlehrerverbände, Prüforganisationen) sowie auf Literatur- und Internetrecherchen. Bei der Länderauswahl wurden " neben europäischen Ländern mit einer traditionell stark ausgeprägten formalen Fahrschulausbildung " auch "Graduated Driver Licensing"-Systeme berücksichtigt, die vor allem in der englischsprachigen Welt in Übersee anzutreffen sind. Sie sind durch die Gewährleistung eines umfangreichen Fahrerfahrungsaufbaus unter niedrigen Risikobedingungen durch Begleitetes Fahren ("supervised driving") vor dem Beginn des selbständigen Fahrens und protektive Sonderregelungen für Fahranfänger beim weiteren Fahrerfahrungsaufbau in der Anfangsphase des selbständigen Fahrens gekennzeichnet. Die Ergebnisse ermöglichen einen detaillierten Einblick in die länderspezifische Ausgestaltung der Fahranfängervorbereitung mit den Bestandteilen der formalen Fahrausbildung in Fahrschulen, informeller Lehr-Lernformen wie des Begleiteten Fahrenlernens, zu absolvierender Fahrerlaubnisprüfungen sowie rechtlicher Rahmenbedingungen und qualitätssichernder Maßnahmen. Vor dem Hintergrund von Evaluationsbefunden zur Sicherheitswirksamkeit wird die Funktionalität von Systembestandteilen und -architekturen diskutiert.
Der Allgemeine Deutsche Automobil-Club e.V. (ADAC) und die Bundesanstalt für Straßenwesen (BASt) veranstalteten am 13. Oktober 2006 in Baden-Baden das 6. Symposium "Sicher fahren in Europa". Die Fachvorträge befassten sich mit den Themenbereichen: Ansätze zu mehr Verkehrssicherheit, - Verbesserung der Fahrzeugsicherheit, - Besondere Zielgruppen. Die CD-ROM dokumentiert die Grußworte, die Referate und die Podiumsdiskussion.
This work aims at bringing evidence for mass incompatibility in frontal impact for cars built according to the UNECE R94 regulation. French national injury accidents database census for years 2005 to 2008 were used for the analysis. The heterogeneity of frontal self-protection among cars of different masses is investigated, as well as the partner protection parameter offered by these cars. The last part of the analysis deals with the estimation of the benefit, in terms of fatal and severe injuries avoided, if crashworthiness was harmonized for the whole fleet of vehicle. This calculation is done for France and is extended to all Europe.
In Deutschland existieren bereits seit Jahren viele leistungsfähige Telematiksysteme und Referenzarchitekturen für Teilbereiche, z. B. TLS (BASt, 2002) und MARZ (BASt, 1999) zum Aufbau von Verkehrsbeeinflussungsanlagen an Bundesfernstraßen. Die Entwicklungen solcher Systeme in Deutschland gehen bis in die 1990er Jahre und davor zurück. Zum Teil wurden diese Ansätze auch von anderen Ländern übernommen und sind dort erfolgreich implementiert. Bislang fehlt aber in Deutschland ein nationaler Orientierungsrahmen für den Aufbau und die Vernetzung von Telematiksystemen, sodass viele Implementierungen als unvernetzte Insellösungen betrieben werden und mögliche Synergien ungenutzt bleiben. Die Vorteile einer übergreifenden ITS-Architektur wurden bereits durch zahlreiche Arbeiten seit den frühen 1990er Jahren belegt und sind heute unstrittig. In anderen Ländern liegen solche nationalen Orientierungsrahmen bereits seit Jahren vor. Die USA hat als erstes Land im Jahr 1996 eine nationale ITS-Architektur (NITSA) veröffentlicht, die bis heute bereits zur sechsten Version fortgeschrieben wurde. Im Rahmen dieser Entwicklungen wurde ein ganzes Netz an Zuständigkeiten und Organisationseinheiten eingerichtet, um eine effiziente und nachhaltige Nutzung der NITSA zu gewährleisten. Auch rechtliche Maßnahmen wurden ergriffen, um eine Verbindlichkeit für die Anwendung der ITS-Architektur in Teilen zu erreichen und deren Verbreitung zu sichern. Viele andere Länder ausserhalb und innerhalb Europas besitzen ebenfalls seit Jahren eigene nationale ITS-Architekturen. Auf europäischer Ebene gibt es bereits seit den frühen 1990er Jahren Forschungsprojekte zu einer europaweit harmonisierten ITS-Architektur. Mit KAREN wurde im Jahr 2000 die erste Version einer europäischen ITS-Rahmenarchitektur veröffentlicht. In den FRAME-Projekten, bis hin zum aktuellen Projekt E-FRAME, wurde und wird diese ITS-Architektur fortgeschrieben. In der europäischen Verkehrspolitik spielt die Telematik eine wesentliche Rolle. Mit dem Aktionsplan zur Einführung von ITS in Europa (KOM(2008) 886) oder dem Richtlinienvorschlag zur Festlegung eines Rahmens für die Einführung von ITS im Straßenverkehr (KOM(2008) 887) sind gezielte Maßnahmen, auch im Hinblick auf eine europäische ITS-Architektur, in Vorbereitung. Deutschland nimmt im Angesicht dieser Entwicklungen eine Sonderrolle ein, weil hier noch kein Orientierungsrahmen zum Aufbau einer nationalen ITS-Architektur geschaffen wurde. Dass solch ein Orientierungsrahmen anzustreben ist, wird von allen beteiligten Interessengruppen aus dem Bereich ITS gleichermaßen vertreten. Im Rahmen dieses Forschungsprojekts wurde ein Workshop durchgeführt, der dies deutlich bestätigte. Das wesentliche Ziel dieses Forschungsprojekts bestand darin, aus den Entwicklungsprozessen und Erfahrungen in anderen Ländern und den bisherigen Erfahrungen im Inland Empfehlungen für den Aufbau einer nationalen ITS-Architektur in Deutschland abzuleiten. Dazu wurden zunächst im Rahmen einer Strukturierung Begriffsbestimmungen vorgenommen und ein Beschreibungs- und Bewertungsschema für die Analyse von ITS-Architekturen entwickelt. Ein Workshop wurde durchgeführt, um einen Eindruck über die Standpunkte der beteiligten Interessengruppen zu gewinnen und festzustellen, wie der Prozess für die Entwicklung einer nationalen ITS-Architektur in Deutschland begonnen werden könnte. Im Anschluss an diese Arbeiten wurden zum einen eine Auswahl von Beispielen für ITS-Architekturen in Deutschland und zum anderen nationale ITS-Architekturen weltweit analysiert. Aus den Analysen wurden Handlungsempfehlungen für die Entwicklung einer ITS-Architektur für Deutschland abgeleitet. Diese Empfehlungen beziehen sich zum einen auf den gesamten Prozess zur Erstellung und Fortschreibung einer nationalen ITS-Architektur und zum anderen auf die Inhalte der zu erarbeiteten Dokumente wie des nationalen ITS-Leitbilds und des nationalen ITS-Rahmenplans, der Rahmenarchitektur und der Referenzarchitekturen. Als Ergebnis dieses Forschungsprojekts wurden 40 Empfehlungen für den Aufbau einer nationalen ITS-Architektur in Deutschland formuliert.
A set of recommendations for pan-European transparent and independent road accident investigations has been developed by the SafetyNet project. The aim of these recommendations is to pave the way for future EU scale accident investigation activities by setting out the necessary steps for establishing safety oriented road accident investigations in Member States. This can be seen as the start of the process for establishing road accident investigations throughout Europe which operate according to a common methodology. The recommendations propose a European Safety Oriented Road Accident Investigation Programme which sets out the procedures that need to be put in place to investigate a sample of every day road accidents. They address four sets of issues; institutional addressing the characteristics of the programme; operational describing the conditions under which data isrncollected; data storage and protection; and reports, countermeasures and the dissemination of data.rn
A lack of representative European accident data to aid the development of safety policy, regulation and technological advancement is a major obstacle in the European Union. Data are needed to assess the performance of road and vehicle safety and is also needed to support the development of further actions by stakeholders. This short-paper describes the process of developing a data collection and analysis system designed to partly fill these gaps. A project team with members from 7 countries was set up to devise appropriate variable lists to collect fatal crash data under the following topic levels: accident, road environment, vehicle, and road user, using retrospective detailed police reports (n=1,300). The typical level of detail recorded was a minimum of 150 variables for each accident. The project will enable multidisciplinary information on the circumstances of fatal crashes to be interpreted to provide information on a range of causal factors and events surrounding the collisions.
The Powered Two Wheelers (PTWs) accidents constitute one of the road safety targets in Europe. PTWs users' fatalities represent 15% of EU road fatalities, having increased the last few years, which is quite opposite than other road users casualties. To reduce PTW accidents is necessary to know which the accident causations are from different points of view (human factor, vehicle characteristics, environment, type of accident, situation, etc.). In TRACE project ("Traffic Accident Causation in Europe", under the European Commission 6th Framework Program, 2006-2008,) a specific task was focused on PTW users point of view, analyzing extensive databases to locate the main accident configurations (type of accident, severity, frequency), and an in-depth database to obtain the causation factors, the risk factors for each configuration founded in the extensive databases analysis and the variables associated to each causation factor in the PTW configurations.
In the context of the COST357 research project, the climatic conditions and requirements for protective helmets for motorcyclists have been examined. The extent to which these factors would influence motorbike handling and accidents in which motorcyclists are involved have also been examined. This project addresses how cognitive abilities of motorcyclists relate to helmet construction factors. In particular, the aspects of motorcycle driver helmets are to be parameterized in order that they may be used subsequently as a basis for future requirement profiles. The task of one working group of the COST357 project has been to analyse accident events and to identify helmet design issues which affect motorcycle drivers while wearing a helmet. This has been achieved by collating accident data across different countries recorded in the course of in-depth investigations at the site of accidents and by combining this with field studies of motorcyclists participating in traffic, but not involved in accidents. This paper presents the study methodology, database and first results of this international survey. The basis of the study has been a total of 424 interviews of motorcyclists and 134 motorcycle accidents, which were collected across Germany, Greece, Italy, Ireland, Portugal and Turkey and combined in a single database.
In an on-going project since 2005, ADAC has been analyzing accidents documented by the ADAC air rescue service. The knowledge derived from real-life accidents serves as a basis for new test configurations and assessment criteria. In 2007, ADAC began looking into the feasibility of international data collection. The idea of Global Accident Prevention was born. Three European partner clubs have begun pioneering the project (ÖAMTC, ANWB, and RACC). The aim is to set up an international accident research network to provide a steady stream of information on road accidents. The FIA Foundation supports ADAC in developing and coordinating this initiative.