Sonstige
Filtern
Erscheinungsjahr
- 2005 (59) (entfernen)
Dokumenttyp
- Konferenzveröffentlichung (37)
- Buch (Monographie) (14)
- Wissenschaftlicher Artikel (7)
- Arbeitspapier (1)
Schlagworte
- Conference (30)
- Konferenz (29)
- Accident (25)
- Unfall (25)
- Deutschland (19)
- Germany (19)
- Fahrzeug (15)
- Vehicle (15)
- Injury (14)
- Verletzung (14)
Institut
Der Bauwerksbestand in Bundesfernstraßen und gleichermaßen in Landes-, Staats- und Kommunalstraßen stammt zum überwiegenden Teil aus der Phase des Wiederaufbaus Deutschlands in den Jahren 1960-1980. Die Bauwerke haben somit ein durchschnittliches Alter von 30 bis 50 Jahren erreicht, was sich inzwischen an zunehmenden Schäden an den Bauwerken zeigt. Die ständige Beobachtung und Prüfung der Bauwerke erhält somit eine zentrale Bedeutung im Rahmen der Sicherheitsphilosophie des Ingenieurbaus und des Bauwerksmanagementsystems. Bauwerksprüfungen nach DIN 1076 sind daher in Zukunft ein wichtiger werdendes Aufgabenfeld, für das gut ausgebildetes und geschultes Personal vorhanden sein muss, um den sehr komplexen Bauwerksbestand richtig beurteilen zu können. Wegen des weiter voranschreitenden Personalabbaus bei den Verwaltungen, wird es dabei zunehmend notwendig werden auch Externe mit dieser verantwortungsvollen Aufgabe zu betrauen. Hierzu ist es Voraussetzung, dass auch diese Bauwerksprüfingenieure die notwendige Qualifikation und Erfahrung haben.
Immer wieder kommt es bei Arbeitsstellen kürzerer Dauer zu Auffahrunfällen auf die fahrbare Absperrtafel, häufig verursacht durch den Schwerverkehr. Unfallursachen sind oftmals Unachtsamkeit oder Übermüdung der Fahrer. Deshalb ist es erforderlich, geeignete Sicherungsmaßnahmen zu suchen, die sowohl einen flüssigen und sicheren Verkehrsablauf gewährleisten als auch das Risikopotenzial für die Arbeitskräfte durch Vermeidung von Unfällen deutlich verringern. Einen vielversprechenden Ansatz stellen die in den Niederlanden eingesetzten Warnschwellen dar, die 150 m vor der fahrbaren Absperrtafel verlegt werden, wodurch unachtsame Fahrer beim Überfahren mechanisch gewarnt werden. Deshalb wurde der Einsatz von Warnschwellen bei Arbeitsstellen kürzerer Dauer auf Bundesautobahnen im Rahmen von Pilotversuchen in Nordrhein-Westfalen und Rheinland-Pfalz praktisch erprobt. Auf Grund der gewonnenen Erkenntnisse wird uneingeschränkt bei allen stationären Arbeitsstellen kürzerer Dauer auf dem Seitenstreifen sowie auch für stationäre Arbeitsstellen kürzerer Dauer auf zweistreifigen Richtungsfahrbahnen mit Sperrung eines Fahrstreifens empfohlen, Warnschwellen einzusetzen.
Die Notwendigkeit der Erstellung eines neuen Regelwerks für Gesteinskörnungen, Schichten ohne Bindemittel, Asphalt, hydraulisch gebundene Tragschichten und Beton für Fahrbahndecken ergab sich aus der Umsetzung der Europäischen Normen (EN). Die seit dem 1. Juni 2004 gültigen EN für Gesteinskörnungen wurden durch die Technischen Lieferbedingungen für Gesteine im Straßenbau (TL Gestein-StB) in Deutschland anwendbar gemacht. Ausgehend von den TL Gestein-StB mussten für die verschiedenen Einsatzgebiete der Gesteinskörnungen die betroffenen Regelwerke überarbeitet werden. Hierbei wurden bestehende oder fast fertig gestellte EN berücksichtigt. Diese Überarbeitung basiert auf dem "zweiteiligen Regelwerk", das heißt Zusätzliche Technische Vertragsbedingungen (ZTV) und Technische Lieferbedingungen (TL), für den jeweiligen Produktbereich. Das Anforderungsniveau der Baustoffe und Baustoffgemische wurde gegenüber den bisherigen Festlegungen weitgehend beibehalten. Die bisherige Güteüberwachung wurde auf Grund der Vorgaben der mandatierten EN durch ein neues Qualitätsnachweisverfahren ersetzt. Unterstützt wird dieses neue Verfahren durch die freiwillige Güteüberwachung der Gesteinsproduzenten. Die neuen Regelungen werden in dieser 2-teiligen Veröffentlichung vorgestellt. Veränderungen und Zusammenhänge der Regelwerke werden anhand von Beispielen dargestellt. Die Auswirkungen der Neuerungen und die weitere Entwicklung der Regelwerke werden diskutiert.
The European Enhanced Vehicle-safety Committee wants to promote the use of more biofidelic child dummies and biomechanical based tolerance limits in regulatory and consumer testing. This study has investigated the feasibility and potential impact of Q-dummies and new injury criteria for child restraint system assessment in frontal impact. European accident statistics have been reviewed for all ECE-R44 CRS groups. For frontal impact, injury measures are recommended for the head, neck, chest and abdomen. Priority of body segment protection depends on the ECE-R44 group. The Q-dummy family is able to reflect these injuries, because of its biofidelity performance and measurement capabilities for these body segments. Currently, the Q0, Q1, Q1.5, Q3 and Q6 are available representing children of 0, 1, 1.5, 3 and 6 years old. These Q-dummies cover almost all dummy weight groups as defined in ECE-R44. Q10, representing a 10 year-old child, is under development. New child dummy injury criteria are under discussion in EEVC WG12. Therefore, the ECE-R44 criteria are assessed by comparing the existing P-dummies and new Q-dummies in ECE-R44 frontal impact sled tests. In total 300 tests covering 30 CRSs of almost all existing child seat categories are performed by 11 European organizations. From this benchmark study, it is concluded that the performance of the Q-dummy family is good with respect to repeatability of the measurement signals and the durability of the dummies. Applying ECE-R44 criteria, the first impression is that results for P- and Q-dummy are similar. For child seat evaluation the potential merits of the Q-dummy family lie in the extra measurement possibilities of these dummies and in the more biofidelic response.
The need for improved EU level accident information and data was identified in the EU White Paper on Transport Policy (2001)1 and detailed in the Road Safety Action Plan (2003)2. The plan specifies that the EC will develop a road safety observatory to coordinate data collection within an integrated framework.
This study is aimed to investigate the correlations of impact conditions and dynamic responses with the injuries and injury severity of child pedestrians by accident reconstruction. For this purpose, the pedestrian accident cases were selected from Sweden and Germany with detailed information about injuries, accident cars, and accident environment. The selected accident cases were reconstructed using mathematical models of pedestrian and passenger car. The pedestrian models were generated based on the height, weight, and age of the pedestrian involved in accidents. The car models were built up based on the corresponding accident car. The impact speeds in simulations were defined based on the reported data. The calculated physical quantities were analyzed to find the correlation with injury outcomes registered in the accident database. The reconstruction approaches are discussed in terms of data collection, estimating vehicle impact speeds, pedestrian moving speeds and initial posture, secondary ground impact, validity of the mathematical models, as well as impact biomechanics.
The data situation for quantifying the proportion of accidents avoided by the introduction of active safety systems is incomplete, since there is generally no data available on the accidents avoided by the technology in question. In this paper, a split-register approach is suggested and compared with the classical case-control approach known from epidemiologic applications. Provided a set of assumptions hold, which can reasonably be made in such data situations, the split register approach allows inferences on the population accident risk. For both approaches the benefits of basing the analysis on the results of a logistic regression to adjust for confounding factors are outlined. The biasing effects of violating key assumptions are discussed and the split-register approach is demonstrated using the example of the active safety system ESP with data from the German in-depth accident study GIDAS.
Active safety systems are aimed at accident prevention, hence the knowledge required for their development is different from that required for passive safety systems aimed at injury prevention. Particularly, knowledge about accident causation is required. When looking at existing accident causation data, it is argued it fails to explain in sufficient detail how and why the accidents occur. Therefore, there is a need for detailed micro-level descriptions of accident causation mechanisms, and also of methodologies suitable for creating such descriptions. One study addressing these needs is the Swedish project FICA (Factors Influencing the Causation of Accidents and Incidents), where an accident investigation methodology suitable for active safety is developed, and in-depth accident investigations following this methodology are carried out on-scene in the area of Gothenburg by a multidisciplinary team. A preliminary aggregated analysis of different cases shows that the methodology developed is adequate for pointing out common contributing factors and devising principal countermeasures.
Electronic Stability Program (ESP) aims to prevent the lateral instability of a vehicle. Linked to the braking and powertrain systems, it prevents the car from running wide on a corner or the rear from sliding out. It also helps the driver control his trajectory, without replacing him, in the case of loss of control where the driver is performing an emergency manoeuvrer (confused and exaggerated steering wheel actions). A new ESP function optimizes ESP action in curves with hard under steering (situations in which the front wheels lose grip and the vehicle slides towards the outside of the curve). A complementary feature prevents the wheels from spinning when pulling away and accelerating. The name given to the ESP system varies according to the vehicle manufacturer, but other terms include: active stability control (ASC), automotive stability management system (ASMS), dynamic stability control (DSC), vehicle dynamic control (VDC), vehicle stability control (VSC) or electronic stability Control (ESC). This paper proposes an evaluation of the effectiveness of ESP in terms of reduction of injur accidents in France. The method consists of 3 steps: - The identification, in the French National injury accident census (Gendarmerie Nationale only), of accident-involved cars for which the determination of whether or not the car was fitted with ESP is possible. A sample of 1 356 cars involved in injury accidents occurred in 2000, 2001, 2002 and 2003 was then selected. But we had to restrict the analysis to only 588 Renault Lagunas. - The identification of accident situations for which we can determine whether or not ESP is pertinent (for example ESP is pertinent for loss of control accidents whilst it is not for cars pulling out of a junction). - The calculation, via a logistic regression, of the relative risk of being involved in an ESPpertinent accident for ESP equipped cars versus unequipped cars, divided by the relative risk of being involved in a non ESP-pertinent accident for ESP equipped cars versus unequipped cars. This relative risk is assumed to be the best estimator of ESP effectiveness. The arguments for such a method, effectiveness indicator and implicit hypothesis are presented and discussed in the paper. Based on a few assumptions, ESP is proved to be highly effective. Currently, the relative risk of being involved in an ESP pertinent accident for ESP-equipped cars is lower (-44%, although not statistically significant)rnthan for other cars.rn
The so-called "seat-belt injuries" or "seat-belt syndromes", described as 2-point seat-belt injuries, contain heavy inflection injuries of the lumbal spinal column, combined with heavy abdominal injuries as rupture of the upper intestinal bold or heavy injuries of the upper entrails. With "playing" children in the font of the car, with inappropriate plant of 3-point belts, identical injuries can occur.