Sonstige
Filtern
Erscheinungsjahr
- 2016 (69) (entfernen)
Dokumenttyp
- Buch (Monographie) (37)
- Wissenschaftlicher Artikel (16)
- Konferenzveröffentlichung (10)
- Teil eines Buches (Kapitel) (3)
- Bericht (3)
Schlagworte
- Deutschland (38)
- Forschungsbericht (38)
- Germany (37)
- Research report (37)
- Bewertung (23)
- Evaluation (assessment) (21)
- Brücke (13)
- Bridge (12)
- Verfahren (10)
- Method (9)
This study aimed to better understand nitrate transport in the soil system in a part of the state of North Rhine-Westphalia, in Germany, and to aid in the development of groundwater protection plans. An advection-diffusion (AD) cell was used in a miscible displacement experiment setup to characterize nitrate transport in 12 different soil samples from the study area. The three nitrate sorption isotherms were tested to define the exact nitrate interaction with the soil matrix. Soils varied in their properties which in its turn explain the variations in nitrate transport rates. Soil texture and organic matter content showed to have the most important effect on nitrate recovery and retardation. The miscible displacement experiment indicated a decrease in retardation by increasing sand fraction, and an increase in retardation by increasing soil organic matter content. Soil samples with high sand fractions (up to 94 %) exhibited low nitrate sorption capacity of less than 10 %, while soils with high organic matter content showed higher sorption of about 30 %. Based on parameterization for nitrate transport equation, the pore water velocity for both sandy and loamy soils were significantly different (P < 0.001). Pore water velocity in sandy soil (about 4 x 10 high 3 m/s) was about 100 to 1000 larger than in loamy soils (8.7 x 10 high 5 m/s). On the other hand, the reduction in nitrate transport in soils associated with high organic matter was due to fine pore pathways clogged by fine organic colloids. It is expected that the existing micro-phobicity increased the nitrate recovery from 9 to 32 % resulting in maximum diffusion rates of about 3.5 x 10 high 5 m/s2 in sandy soils (sample number CS-04) and about 1.4 x 10 high 7 m/s2 in silt loam soils (sample number FS-02).
The road transport infrastructure is facing many challenges and the subsequent adaptation of the infrastructure is of utmost concern. These challenges are as follows: globalization, sustainability, technological and demographic change, an increase in goods transport and climate change. Various climate projections predict changing climatic parameters such as temperature, precipitation and wind speed for Germany. This could have severe impacts on road transport infrastructure as well as road traffic itself. At the Federal Highway Research Institute (Bundesanstalt für Straßenwesen), a strategy was developed to adapt roads and engineering structures to the impacts of climate change. The strategy "Anpassung der Straßenverkehrsinfrastruktur an den Klimawandel /Adaptation of road traffic infrastructure to climate change (AdSVIS)" currently comprises about 15 projects. Adaptation measures are to be developed for the identified risk areas and consequently their effectiveness has to be assessed.
Automated driving will provide many kinds of benefits - some direct and some indirect. The benefits originate at the individual level, from changes in the behaviour of drivers and travellers with regard to driving and mobility, ending up with benefits at the social level via changes in the whole transport system and society, where many of the current planning and operations paradigms are likely to be transformed by automated driving. There may also be disbenefits, particularly at a social level, for example in intensity of travel which could result in additional congestion and increased use of natural resources. There may also be unintended consequences. For example, we do not know the impacts on public transport: driverless vehicles could provide a means to a lower cost service provision, but the availability of automated cars could lead to more car travel at the expense of collective transport.
Motorcycling is a fascinating kind of transportation. While the riders' direct exposure to the environment and the unique driving dynamics are essential to this fascination, they both cause a risk potential which is several times higher than when driving a car. This chapter gives a detailed introduction to the fundamentals of motorcycle dynamics and shows how its peculiarities and limitations place high demands on the layout of dynamics control systems, especially when cornering. The basic principles of dynamic stabilization and directional control are addressed along with four characteristic modes of instability (capsize, wobble, weave, and kickback). Special attention is given to the challenges of braking (brake force distribution, dynamic over-braking, kinematic instability, and brake steer torque induced righting behavior). It is explained how these challenges are addressed by state-of-the-art brake, traction, and suspension control systems in terms of system layout and principles of function. It is illustrated how the integration of additional sensors " essentially roll angle assessment " enhances the cornering performance in all three categories, fostering a trend to higher system integration levels. An outlook on potential future control systems shows exemplarily how the undesired righting behavior when braking in curves can be controlled, e.g., by means of a so-called brake steer torque avoidance mechanism (BSTAM), forming the basis for predictive brake assist (PBA) or even autonomous emergency braking (AEB). Finally, the very limited potential of brake and chassis control to stabilize yaw and roll motion during unbraked cornering accidents is regarded, closing with a promising glance at roll stabilization through a pair of gimbaled gyroscopes.
In line with the new definition introduced by the European Commission (EC), the number of seriously injured road casualties in Germany for 2014 is assessed in this study. The number of MAIS3+ casualties is estimated by two different methodological approaches. The first approach is based on data from the German Inâ€Depth Accident Study (GIDAS), which is closely related to the German Road Traffic Accident Statistics. The second approach is based on data from the German TraumaRegister DGU-® (TRâ€DGU), which includes many more hospitals but not all MAIS3+ injuries.
Im Erd- und Straßenbau ist es in den letzten Jahren bei bindemittelbehandelten sulfathaltigen Böden wiederholt zu teilweise erheblichen Schäden durch Quellhebungen gekommen, die auf eine Mineralreaktion im Boden zurückzuführen sind. Werden Böden mit natürlichem Sulfatgehalt zu bautechnischen Zwecken mit calciumbasierten Bindemitteln behandelt, so kann das Bindemittel unter bestimmten Randbedingungen mit den im Gips enthaltenen Sulfationen zum Mineral Ettringit reagieren. Infolge der mit dieser Mineralneubildung verbundenen Volumenvergrößerung kann es zu erheblichen Hebungsschäden kommen. Die für die Reaktion des Sulfattreibens im Boden maßgebenden Einflussfaktoren sind zwar grundsätzlich bekannt, quantitative Prüfmethoden und standardisierte Strategien zur Gefahrenabwehr lagen bis dato allerdings noch nicht vor. Das Ziel des Forschungsvorhabens, über das in diesem Beitrag berichtet wird, war die Entwicklung eines praxistauglichen Prüfverfahrens als Grundlage für eine hieraus abzuleitende Prüfvorschrift. Hierfür wurden an Proben aus verschiedenen Boden-Bindemittelgemischen mit definierten Sulfatgehalten Quellhebungsversuche geplant, durchgeführt und ausgewertet. Im Ergebnis wurde ein annähernd linearer Zusammenhangzwischen dem Sulfatgehalt im Boden und den eingetretenen Quellhebungen festgestellt. Die Ergebnisse zeigen ferner, dass eine Behandlung sulfathaltiger Böden mit Weißfeinkalk mit größeren Quellhebungen verbunden ist als eine Behandlung mit Zement.
Brücken stellen eine wichtige Komponente unserer Verkehrsinfrastruktur dar, allerdings werden heutzutage die meisten Entscheidungen im Rahmen von Vergaben auf Grundlage der Herstellungskosten getroffen. Dieses Vorgehen greift indes zu kurz, da die Leistungsfähigkeit von Brücken in der Nutzungsphase und die mit Brückenbaumaßnahmen verbundenen Verkehrsbeeinträchtigungen eine wichtige Rolle spielen. Daher muss es ein Ziel sein, eine lebenszyklusorientierte Analyse und Bewertung in der Planungspraxis zu etablieren. Hierfür stellt der vorliegende Beitrag Grundlagen bereit, indem für die Nachhaltigkeitsanalyse von Brücken einzusetzende Methoden erläutert und in umfangreichen Vergleichsrechnungen angewendet werden. Die Ergebnisse sollen zuständige Behörden, Planern und Bauherren sowohl bei der Gestaltung von Nachhaltigkeitsbewertungssystemen unterstützen als auch Vergleichswerte für typische Autobahnüberführungen bereitstellen.
Die Europäischen Normen für Erdarbeiten werden im CEN/TC 396 "Earthworks" erarbeitet. Das Sekretariat des CEN/TC 396 wird vom französischen Normungsinstitut AFNOR gehalten. Die Normungsarbeit wird im DIN-Ausschuss NA 005-05-22 AA "Erdarbeiten (SpA zu CEN/TC 396), Gemeinschaftsausschuss mit FGSV GA 5.01" gespiegelt. Vertreter des Spiegelausschussesarbeiten in den verschiedenen Arbeitsgruppen (working groups (WG)) des CEN/TC 396 mit. In den Jahren 2009 und 2010 wurden die Gremien konstituiert und mit der Normungsarbeit begonnen, zunächst überwiegend durch die Zusammenstellung der vorhandenen Regelungen in den Mitgliedsstaaten (siehe auch Beitrag Vogel/Leister/Heyer zur Erd- und Grundbautagung 2013). Im November 2014 wurden vom CEN/TC 396 die Arbeitsaufträge("work items") offiziell gestartet.
Established in 1997, the European New Car Assessment Programme (Euro NCAP) provides consumers with a safety performance assessment for the majority of the most popular cars in Europe. Thanks to its rigorous crash tests, Euro NCAP has rapidly become an important driver safety improvement to new cars. After ten years of rating vehicles, Euro NCAP felt that a change was necessary to stay in tune with rapidly emerging driver assistance and crash avoidance systems and to respond to shifting priorities in road safety. A new overall rating system was introduced that combines the most important aspects of vehicle safety under a single star rating. The overall rating system has allowed Euro NCAP to continue to push for better fitment and higher performance for vehicles sold on the European market. In the coming years, the safety rating is expected to play an important role in the support of the roll-out of highly automated vehicles.
Bewertung der strukturellen Substanz für die systematische Erhaltungsplanung von Betonfahrbahndecken
(2016)
"Mobilität ist zentrale Voraussetzung für wirtschaftliches Wachstum, Beschäftigung und Teilhabe des Einzelnen am gesellschaftlichen Leben." Dieser Leitsatz des BMVI setzt eine intakte und funktionierende Infrastruktur voraus. Im Kontext mit dem Investitionshochlauf in den nächsten Jahren ist für das Bundesfernstraßennetz insbesondere ein netzbezogenes systematisches Vorgehen im Rahmen der Baulichen Erhaltung von Relevanz. Bei der Planung von Erneuerungsmaßnahmen ist dabei die Kenntnis über den Zustand der strukturellen Substanz und deren langfristige Entwicklung von zentraler Bedeutung. Nachfolgend wird ein Verfahren vorgestellt, das die mechanisch und statistisch abgesicherte Bewertung und Prognose der strukturellen Substanz von Betonfahrbahndecken ermöglicht. Zudem werden die Anwendung und das Vorgehen anhand eines Praxisbeispiels aufgezeigt.