Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (150)
- Buch (Monographie) (69)
- Wissenschaftlicher Artikel (8)
- Bericht (1)
- Arbeitspapier (1)
Schlagworte
- Unfall (229) (entfernen)
In the context of the COST357 research project, the climatic conditions and requirements for protective helmets for motorcyclists have been examined. The extent to which these factors would influence motorbike handling and accidents in which motorcyclists are involved have also been examined. This project addresses how cognitive abilities of motorcyclists relate to helmet construction factors. In particular, the aspects of motorcycle driver helmets are to be parameterized in order that they may be used subsequently as a basis for future requirement profiles. The task of one working group of the COST357 project has been to analyse accident events and to identify helmet design issues which affect motorcycle drivers while wearing a helmet. This has been achieved by collating accident data across different countries recorded in the course of in-depth investigations at the site of accidents and by combining this with field studies of motorcyclists participating in traffic, but not involved in accidents. This paper presents the study methodology, database and first results of this international survey. The basis of the study has been a total of 424 interviews of motorcyclists and 134 motorcycle accidents, which were collected across Germany, Greece, Italy, Ireland, Portugal and Turkey and combined in a single database.
This paper describes the methodology of In-Depth Investigation in Germany on the example of GIDAS (German In-Depth Accident Study). Since 1999 in Germany a joint project between FAT (Forschungsvereinigung Automobiltechnik or Automotive Industry Research Association) and BASt (Bundesanstalt für Straßenwesen or the Federal Road Research Institute) is being carried out in Hannover and Dresden. The methodology of this project is based on a statistically orientated procedure of data sampling (sampling plan, weighting factors). The paper describes the possibilities of such in-depth investigation on the results of the offered title. The accident cases were collected randomly within GIDAS at Hannover. There are more cases existing from previous investigation started in 1985 under the same methodology. The portion of rollovers can be established at 3.7% of all accidents with casualties in the year 2000. For the study 434 cases of car accidents with rollovers are used for a detail comprehensive analysis. The accidents happened in the years 1994 to 2000 in the Hannover area. The injury distribution will report about 741 occupants with rollover accident event. The presented paper will give an overview of the accident situations following in rollover movements of cars. The distributions of injury frequencies, injury severity AIS for the whole body and for the body regions of occupants will be presented and compared to technical details like the impact speed and the deformation pattern. The speed of the car was determined at the point of rollover and on the point of accident initiency. The characteristics of the kinematics followed in a rollover movement are analyzed and the major defined types of rollover will be shown in the paper. The paper will describe the possibilities of In-Depth Investigation methods for the approach of finding countermeasures on the example of car accidents with rollover and explaining the biomechanics of injuries in rollover movements.
Nigeria ranks one of the highest countries in the world with the largest accident, especially when measured by whiplash associated disorders, whereas, traffic safety education rate, data and information been widely known as preventive indicators have been grossly neglected. In Nigeria, traffic safety enlightenment, awareness, political understanding and appreciation of the problem's magnitude are lacking. This study, therefore, seeks to understand and document the fact that accident causation factors in Nigeria relate more to the problem of development, poverty, knowledge and education as evidenced in most other developing countries. Among the primary accident causation factors on Nigerian roads are: - lack of a transportation system or multi-model integration - sub-standard and obsolete vehicles and road furniture - poor road maintenance, investment and engineering management - paucity of road users' and drivers' knowledge, skill, enlightenment and education of the road Use This paper submits that Nigeria being a developing nation requires purely primitive strategies being cost effective (health wise) than curative measures. It is in this light that an enduring, comprehensive and sustainable traffic safety educational programmes information base and data inventory, analysis and implementations form the focus of this study. This effort will provide basic guidelines framework and implementation procedure for a successful prevention of whiplash associated disorder resulting from road traffic crashes in Nigeria and other parts of the world.
This report gives an overview of pedestrian accidents on Japanese roads. Database used for the analysis is national traffic accident data based on police reports. Relevant measures and background information ranging from vehicle safety, engineering and education are briefly reviewed, and area for further improvement is discussed.rn
While accident statistics on a national level are provided by many countries, there is a need for international data that includes more detailed information about the accident, so called in-depth data. As a consequence, accident data projects have been emerging in different regions of the world. This creates a need for comparable and mergeable data from different countries, enabling the use of already existing accident data resources and helping to expedite the improvement of global road safety. While existing approaches focus that mostly on building a comprehensive accident database from scratch, the iGLAD project (Initiative for the Global Harmonization of Accident Data) attempts a more pragmatic approach by building on top of the work already accomplished in this area and complementing it. The target of iGLAD is to help setting up an additional dataset as a compatibility layer between already existing world wide data sets and integrating the structure of these by defining a common data scheme. This dataset is limited to the common denominator between the existing data sets and is inherently rather small and simple. Eventually, an individual converter for each participating accident investigation group will be built that enables pooling all data sets in a common repository. This not only saves costs and time, and hence makes such a target more feasible, but also creates data that is usable right from the start. This paper gives an overview of the current status of iGLAD and first steps taken. Additionally, some methodological aspects are discussed, next to a glance at other projects working currently on related issues, providing additional input for iGLAD. Finally, an overview of next steps and intended future work is given.
A lot of factors are related to a road traffic accident; particularly human factors such as road use characteristic, driving maneuver characteristic and safety attitude are the major ones. As a random factor is also included, so it is necessary to minimize the contribution of a random factor to identify human factors related to a road traffic accident. There are several standpoints for traffic accident analysis, such as vehicle-based, location-based and driver-based. And it is effective to analyze driver-based traffic accident data for discussion on the relation between human factors and accidents. An integrated traffic accident database system was developed for analysis considering driver- accident and violation records by ITARD, and several studies were carried out for the evaluation. Useful data for discussion on the relation between types of collision and traffic violations, and the effect of accident experience to the following accident were obtained.
Proposal for a test procedure of assistance systems regarding preventive pedestrian protection
(2011)
This paper is showing a proposal for a test procedure regarding preventive pedestrian protection based on accident analysis. Over the past years pedestrian protection has become an increasing importance also during the development phase of new vehicles. After a phase of focusing on secondary safety, there are current activities to detect a possible collision by assistance systems. Such systems have the task to inform the driver and/or automatically activate the brakes. How practical is such a system? In which kind of traffic situations will it work? How is it possible to check the effectiveness of such a system? To test the effectiveness, currently there are no generally approved identifiable procedures. It is reasonable that such a test should be based on real accidents. The test procedure should be designed to test all systems, independent of the system- working principle. The vFSS group (advanced Forward-looking Safety Systems) was founded to develop a proposal for a technology independent test procedure, which reflects the real accident situation. This contribution is showing the results of vFSS. The developed test procedure focuses on accidents between passenger cars and pedestrians. The results are based on analysis results of in-depth databases of GIDAS, German insurers and DEKRA and added by analysis of national and international statistics. The in-depth analysis includes many pre-crash situations with several influencing factors. The factors are e. g. speed of the car, speed of the pedestrian, moving direction and a possible obscuration of the pedestrian by an object. The results comprise also the different situations of adults and children. Furthermore, they include details regarding influence of the lighting conditions (daylight or night) especially with respect to the accident consequences. In fact, more accidents happen at daylight, but fatal accidents are more often at night. A clustering of parameter combinations was found which represents typical accident scenarios. There are six typical accident scenarios which were merged in four test scenarios. The test scenarios are varying the starting position of the pedestrian, the pedestrian size (adult or child) and the speed of the pedestrian, whereas the speed of the car will not be varied. To ensure the independency from used sensing technologies it is necessary to use a suitable dummy. For example, if sensors are based on infrared, the dummy should emit the temperature of a human being. The test procedure will identify the collision speed as the key parameter for assessing the effectiveness of the tested system. The collision speed is defined as the reduction between initial test speed of the car and impact speed. The assessment of the speed reduction value regarding the safety benefit, however, will be part of a separate procedure.
Zu den gefährlichsten Situationen im Straßenverkehr gehört der Konflikt zwischen einem Lkw und einem ungeschützten Verkehrsteilnehmer UVT (Radfahrer und Fußgänger). In Deutschland ereignen sich jährlich schätzungsweise 135 Unfälle mit Personenschaden, an denen nach rechts abbiegende Lkw (>3,5 t) und UVT beteiligt sind. Die UVT geraten dabei oft unter den Lkw und werden dann von einer der Achsen überrollt. Aus der Unfallanalyse ergab sich, dass der Erstkontakt häufig (57%) im Bereich der rechten vorderen Lkw-Ecke erfolgt. Die Hälfte der UVT gerieten noch vor oder im unmittelbaren Bereich des rechten Vorderrads unter den Lkw. Baustellen- und Kommunalfahrzeuge waren mit 46% häufig an den Unfällen beteiligt. Das direkte und das indirekte Sichtfeld sind zentrale Einflussgrößen für die Situation des rechts abbiegenden Lkw. Besonders die unzureichende Sicht nach vorn und nach rechts bereitet den Lkw-Fahrern erhebliche Probleme. An der Verbesserung der Information über die Verkehrssituation für den Lkw-Fahrer wird vielfach gearbeitet. Einzelne Lösungsansätze basieren auf dem Einsatz zusätzlicher Spiegel. Andere Lösungen modifizieren die bislang übliche Spiegelzahl in Form und Anbringung. Das Versuchsprogramm umfasste neben der Nachbildung der besonders häufigen und kritischen Situationen der rechts abbiegenden Lkw mit UVT-Dummies auch statische Untersuchungen des Sichtfeldes. Neben einem Lkw mit Standardspiegeln kam dabei ein Forschungsträger mit einem durch die Frontscheibe einsehbaren Spiegelsystem zum Einsatz. Das Projekt setzte sich auch mit der Wirkung des Seitenschutzes auseinander. Die bislang als Bauvorschrift wirkende Richtlinie 89/297/EWG sollte zukünftig zu einer Wirkvorschrift unter Einbeziehung des Pkw - Anpralls geändert werden. Das im Rahmen des Projektes erstellte Sicherheitskonzept beinhaltet Maßnahmen zur Reduzierung des Gefahrenpotenzials für UVT durch rechts abbiegende Lkw. Dazu gehören unter anderem abgesenkte Unterkanten der Front- und Seitenscheiben und zusätzliche Kamera-Monitor-Systeme. Das neuartige Spiegelsystem des MIM-Fahrzeugs von DC verbessert die indirekte Sicht für den Lkw-Fahrer deutlich und reduziert damit die Unfallgefahr. Die in der Entwicklung befindlichen Abbiegeassistenten zeigen die zukünftige Richtung für elektronische Fahrerunterstützung (MAN Demonstrator) auf. Ein beim Rechtsabbiegen aktivierter akustischer Signalgeber am Lkw wäre zur Information der UVT hilfreich. Eine weitere Option besteht in der Nutzung der seitlichen Markierungsleuchten des Lkws als zusätzliche Fahrtrichtungsanzeiger beim Abbiegen. Fahrbahn-Knotenpunkte können noch sicherer gestaltet werden. An ampelgeregelten Knotenpunkten würde eine vollständige Phasentrennung des Grünlichts oder ein Phasenverzug (früheres Grünlicht für UVT) Unfälle zwischen Lkw und UVT vermeiden. Weiterhin wirken sich eine versetzte Anordnung der Haltelinien und ein Verschwenken der Radfahrwege und Gehwege weg vom Knotenmittelpunkt positiv aus. Der Gesetzgeber sollte -§ 5 (8) StVO ändern, der des Radfahrern und Mofafahrern erlaubt, stehende Kraftfahrzeuge rechts zu überholen. 10% der untersuchten Abbiegeunfälle sind in dieser Situation passiert. Aufklärungsarbeit bezüglich der Sichtprobleme am Lkw sowie über das Bewegungsverhalten beim Rechtsabbiegen ist dringend erforderlich. Es ist auch zu überlegen, ob Aktivitäten von Herstellern beziehungsweise Unternehmern anerkannt werden, die mehr tun als die gesetzlichen Vorschriften verlangen, zu einer Lockerung vorhandener Restriktionen führen können. Es gibt in innerstädtischen Bereichen für einige Fußgängerzonen vorgesehene Zeitfenster zur Anlieferung von Gütern. Solche Zeitfenster könnten für mit anerkannten zusätzlichen Sicherheitseinrichtungen ausgerüstete Lkw ausgedehnt werden. Schwere Lkw aus bestimmten innerörtlichen Bereichen möglichst herauszuhalten, um UVT zu schützen, ist nicht praktikabel. Selbst wenn es gelänge, für die Belieferung mit Post und Waren akzeptable Alternativen zu bieten, bliebe nach wie vor der Baustellenverkehr und die kommunale Entsorgung. An 46% der untersuchten Unfälle waren derartige Lkw beteiligt.
Auf der Grundlage von Unfallauswertungen unter Berücksichtigung der Verkehrsstärken werden Unfallrisiken für Anlagen des Fußgängerquerverkehrs quantifiziert, um daraus Einsatzbereiche für den jeweiligen Anlagentyp abzuleiten. Besonderes Augenmerk gilt dem möglichen Einsatzbereich für den Fußgängerüberweg (Zebrastreifen) und die Abgrenzung des Fußgängerüberwegs gegenüber dem Einsatzbereich der Fußgängerfurt. Gegenüber einer früheren Untersuchung mit gleicher Zielsetzung wurde die Zahl der erfassten Anlagen erhöht und bei der Auswahl der ergänzend erfassten Fußgängerquerungsanlagen verstärkter Wert auf die anlagentypspezifische Repräsentanz gelegt. Verstärkt wurden Fußgängerquerungsanlagen auf freier Strecke (im Unterschied zu Knotenpunktbereichen 3- oder 4-armiger Knoten) berücksichtigt. Merkmale der Umgebungsnutzung (z.B. Sichtbehinderung durch parkende Fahrzeuge, Bebauungsart und -dichte in der Umgebung) der jeweiligen Anlage wurden erfasst und auf eine mögliche Sicherheitswirkung hin untersucht.