Sonstige
Filtern
Erscheinungsjahr
- 2015 (101) (entfernen)
Dokumenttyp
- Buch (Monographie) (55)
- Konferenzveröffentlichung (43)
- Arbeitspapier (2)
- Bericht (1)
Schlagworte
- Germany (93)
- Deutschland (90)
- Research report (52)
- Forschungsbericht (51)
- Conference (37)
- Konferenz (37)
- Test (26)
- Versuch (24)
- Unfall (20)
- Accident (19)
Institut
- Sonstige (101) (entfernen)
Für die Förderung des Radverkehrs in Städten ist ein attraktives und sicheres Radverkehrsnetz unabdingbar. Dabei gewinnt die Führung des Radverkehrs im Mischverkehr auf Hauptverkehrsstraßen sowie insbesondere Schutzstreifen als Form der Führung im Mischverkehr zunehmend an Bedeutung. Mit einem Schutzstreifen wird dem Radfahrer auf der Fahrbahn eine Fläche zur Verfügung gestellt werden, die von anderen Fahrzeugen nur bei Bedarf und ohne Gefährdung des Radverkehrs befahren werden darf. Erstes Ziel des Forschungsvorhabens war es, das Gefährdungspotenzial für Radfahrer auf Hauptverkehrsstraßen im Mischverkehr mit und ohne Schutzstreifen zu bestimmen. Das zweite Ziel war die Bewertung der Einflüsse von Radverkehr im Mischverkehr mit und ohne Schutzstreifen auf die Leistungsfähigkeit und die Verkehrsqualität von Straßenabschnitten. Im Rahmen der Bearbeitung wurde der Erkenntnisstand zur Radverkehrsführung im Mischverkehr recherchiert und aufbereitet. Dazu gehörte auch eine Kommunalrecherche zur aktuellen und zukünftig geplanten Anwendung von Schutzstreifen. Für die Bestimmung des Gefährdungspotentials erfolgte eine Verkehrssicherheitsanalyse durch die Auswertung von Unfalldaten. Die Auswertungen erfolgten für definierte Querschnittstypen. Gleichzeitig wurde das Verkehrsverhalten anhand von Videobeobachtungen auf Strecken mit und ohne Schutzstreifen analysiert. Dazu wurden u.a. Geschwindigkeiten von Kfz- und Radverkehr sowie Überholvorgänge und Abstände erfasst und ausgewertet. Die Videobeobachtungen erfolgten sowohl an zweistreifigen als auch an vierstreifigen Strecken. Da nicht alle denkbaren Verkehrsmengenkonstellationen beobachtet werden konnten, wurde aufbauend auf den Erhebungsdaten eine mikroskopische Simulation durchgeführt, bei der die Verkehrsqualität mit Radeinfluss auch für gegenwärtig nicht beobachtbare Verkehrsstärken von Kfz- und Radverkehr bestimmt wurde. Im Ergebnis werden das Unfallgeschehen und Einflussfaktoren auf das Unfallgeschehen für Radverkehrsführungen im Mischverkehr mit und ohne Schutzstreifen bewertet. Für die verschiedenen untersuchten Querschnittstypen werden die wesentlichen Einflussfaktoren auf die Verkehrsqualität benannt und teilweise quantifiziert. Für den Kfz-Verkehr wurden Qualitätsstufen für die Querschnittstypen und Verkehrsstärkenkombinationen Kfz-Rad entsprechend der HBS-Kategorisierung ermittelt.
In North America, frontal crash tests in both the regulatory environment and consumer-based safety rating schemes have historically been based on full-width and moderate-overlap (40%) vehicle to barrier impacts. The combination of improved seat-belt technologies, notably belt tensioning and load limiting systems, together with advanced airbags, has proven very effective in providing occupant protection in these crash modes. Recently, however, concern has been raised over the contribution of narrower frontal impacts, involving primarily the vehicle corners, to the incidence of fatality and serious injury as a result of the potential for increased occupant compartment intrusion and performance limitations of current restraint systems. Drawing on data documented in the National Automotive Sampling System (NASS)/ Crashworthiness Data System (CDS) for calendar years 1999 to 2012, the present study examines the characteristics of existing and proposed corner crash test configurations, and the nature of real-world collisions that approximate the test environments. In this analysis, particular emphasis is placed on crash pulse information extracted from vehicle-based event data recorders (EDR's).
Today's volumes of traffic require more and more responsibility from each individual road user in their interactions. Those who drive motor vehicles have the singular obligation to minimise the risk of accidents and hence the severity of injuries, particularly with a view to the most vulnerable road users such as motor bikes, bikes and pedestrians. Since responsible and pro-active driving depends first and foremost on the visual information relayed by our eyes and the visual channel this requires good command of the traffic and all-round visibility from our driver's seat. Granted that human error can never be fully excluded, improving visibility around the car is nevertheless an urgent priority. To do so, we need to rate visibility in the most realistic driving situations. Since the existing visibility metrics and methodology are not applicable to real-life driving situations, this study aimed at developing a new visibility rating methodology based on real-life accident scenarios. On the basis of the cases documented by the accident research project, this study analysed criteria indicative of diminishing visibility on the one hand and revealing some peculiarities in connection with the visibility issue on the other. Based on the above, the project set out to develop a rating methodology allowing to assess all-round visibility in various road situations taking into account both driver and road geometries. In this context, the assessment of visibility while turning a corner, crossing an intersection and joining traffic on a major road (priority through route) is of major importance. The first tests have shown that critical situations can be avoided by adapting the relevant geometries and technical solutions and that significant improvements of road safety can be derived therefrom.
Fahrschulüberwachung in Deutschland : Gutachten im Auftrag der Bundesanstalt für Straßenwesen (BASt)
(2015)
Da die Ausgestaltung der Fahrschulüberwachung in den Zuständigkeitsbereich der Bundesländer fällt, bestehen zwischen den Bundesländern Unterschiede bezüglich der Form, des Inhalts und des Umfangs der Fahrschulüberwachung. Im Rahmen der Reform des Fahrlehrerrechts sollen die verschiedenen Umsetzungsvarianten beschrieben und weiterentwickelt sowie Wege zur Vereinheitlichung der Überwachung gefunden werden. Das Gutachten analysiert die rechtlichen Grundlagen sowie die inhaltliche und methodische Ausgestaltung der Fahrschulüberwachung der Fahrausbildung in den einzelnen Bundesländern. Der Stand der maßnahmenpolitischen Diskussion zur Weiterentwicklung der Fahrschulüberwachung sowie die Erwartungen der Bundesländer und der Interessenverbände wird dargelegt. Anforderungen an die Weiterentwicklung werden wissenschaftlich begründet und Umsetzungsmöglichkeiten beschrieben.
High demands on exhaust emissions of passenger cars and light commercial vehicles require complex technologies. The three-way catalytic converter is an essential part of state of the art emission control systems. If a catalytic converter is damaged or its effectiveness deteriorates, it can be replaced by a replacement converter. Replacement catalytic converters from the aftermarket are approved on the basis of Regulation No 103 of the UNECE - United Nations Economic Commission for Europe. According to this regulation the replacement catalytic converter shall be designed, constructed and capable of being mounted so as to enable the vehicle to comply with the provisions taken as a basis for its type approval. Furthermore the pollution emissions must be effectively limited throughout the entire normal service life of the vehicle under normal operating conditions. In the context of the research project, the durability of replacement catalytic converters was examined. A VW Golf with emission standard Euro 4, 1.4 l petrol engine (55 kW) was selected as a test vehicle. At the start of the examinations, the vehicle showed a mileage of 75,000 km. The selected vehicle was regularly serviced in accordance with the manufacturer's specifications. No emission-relevant faults were recorded by the OBD system. The initial control measurement of the vehicle in as-delivered condition with the originally installed catalytic converter showed that the corresponding emissions of the regulated pollutants were considerably below the Euro 4 emission limits to be applied. Subsequently, an original replacement catalytic converter, which was purchased from an authorised dealer, and 4 catalytic converters purchased in the independent aftermarket, were examined. The replacement catalytic converters were conditioned according to the specifications of ECE Regulation No 103 and then measured in new condition. The catalytic converters were then aged on a burner test rig. Here a total mileage of 80,000 km was simulated. After 10,000 km and 40,000 km, the ageing was interrupted and the exhaust gas emissions of the test vehicle with the aged catalytic converters were measured. The examination was ended as soon as a limit value had been exceeded. The results of the project indicate that with the replacement systems for the after-treatment of exhaust gases available in the independent aftermarket, considerable quality differences can occur. At the end of the ageing over a distance of 80,000 km only the original replacement catalytic converter and one replacement catalytic converter from the independent aftermarket complied with the Euro 4 emission limits. With one replacement catalytic converter, the Euro 4 emission limits were already exceeded in new condition. With another replacement catalytic converter, the examination was aborted after 10,000 km ageing and with a further catalytic converter after 40,000 km ageing due to the Euro 4 emission limits being exceeded. The ECE Regulation No 103 provides for a test of durability of such systems over 80,000 km, but also alternatively enables the use of fixed deterioration factors. In practice, the durability of the replacement systems for the after-treatment of exhaust gases is guaranteed by their manufacturers. However, replacement catalytic converters are rarely inspected as part of the approval. In-use compliance provisions for replacement systems for the after-treatment of exhaust gases are not mentioned in the corresponding specifications. The results of this study indicate that the requirements in the ECE Regulation No 103 are not adequate to ensure the durability of replacement catalytic converters.
Mobility plays an important role in the Federal Republic of Germany. Motorised private transport and, consequently, passenger vehicles are the crucial factor. Vehicles should be environmentally and socially compatible yet also economically efficient at the same time. The crucial factor for pollution of the environment from road traffic is the exhaust emissions of the vehicles on the road. This is why, with the Directive 98/69/EC and the related introduction of exhaust emission standard Euro 3, the testing of the conformity of passenger and light commercial vehicles (in-service conformity check) was introduced. Vehicles already on the roads are to be examined again under type examination conditions (Type I Test) after a statistical selection process. In this way it is to be ensured that the systems and components relevant for the exhaust emissions of a vehicle will also function after several thousand kilometres. This is why the vehicles are checked again during in-service conformity check with respect to their limited pollution components. Due to the ever greater significance of CO2 emissions, both the CO2 emissions and the fuel consumption were included in this research project. For the success of such a project the choice of vehicle is of critical importance. Since this is the only way it is possible to also obtain a representative result. Therefore, in addition to the selection criteria required by law, statistical and technical criteria are also considered. The vehicle owners were selected on a random basis. All test vehicles were checked with respect to their pollutant components in the emissions laboratory in accordance with their standard. By law the same testing conditions apply in an in-service conformity check as in the relevant type approval. In this research project a total of 17 vehicle types were examined. Six types were equipped with positive-ignition engines and 11 types with compression ignition engines. Both groups were to each include vehicles of the limits Euro 4 and Euro 5. For vehicle types with positive-ignition engines, there was one type with the exhaust emission standard Euro 5. All others satisfied the exhaust emission standard Euro 4. For the vehicle types with compression ignition engines, 4 types satisfied exhaust emission standard Euro 5 and 7 types fulfilled exhaust emission standard Euro 4. Among the vehicle types with compression ignition and exhaust emission standard Euro4, there were 4 types of category M1 and 3 types of category N1 of class III. The aim of the research project is to examine the exhaust emissions in-service conformity of passenger and light commercial vehicles in operation to draw conclusions concerning the durability of engine components and systems for exhaust emission treatment. Overall in this in-service conformity testing programme, we were able, in accordance with the statistical procedure, to assess all 17 of the vehicle types tested as "positive". With the exception of one vehicle type, it was possible to conclude the random test for all vehicle types tested with the minimum random sample. This means that all 3 vehicles of one type in as-delivered condition complied with or fell below the respective limits for pollutant emissions according to the criteria of the statistical procedure. In the case of one vehicle type, where the random sample had to be enlarged, it was necessary to examine a total of 8 vehicles. Furthermore, with all vehicle types the CO2-emissions and fuel consumption (Type I Test) were determined to subsequently compare the measured CO2 emissions with those of the manufacturers. Of the 17 vehicle types examined, eleven vehicle types complied with the relevant manufacturers" values or fell below them. With six vehicle types, the CO2 emissions were more than the permissible 4% above the manufacturer- value during the Type I Test.
The paper gives an overview of the recent (mostly 2012) figures of killed bus/coach occupants (drivers and passengers) in 27 Member States of the European Union as reported by CARE. The Evolution of the figures of bus/coach occupants killed in road accidents urban, rural without motorway and on motorways from 1991 to 2010 in 15 Member States of the EU supplements this information. More detailed are the figures reported for Germany by the Federal Statistics. The paper displays long-term evaluations (1957 to 2012) for killed, seriously and slightly injured occupants in all kinds of buses/coaches. Midterm evaluations (1995 to 2012) of the figures of fatalities and casualties are displayed for different busses according to their identification of road using as coaches, urban buses, school buses, trolley buses and "other buses". To be able to compare the evolutions of the safety of vehicle occupants it is customary to use different risk indicators. Calculations and illustrations for three often used indicators with their development over time are given: fatalities, seriously injured and slightly injured per 100,000 vehicles registered, per 1 billion (109) vehicle-kilometres travelled and per 1 billion (109) person-kilometres. These indicators are shown for occupants of cars, goods vehicles and buses/coaches. For the period from 1957 until 2012 it is obvious, that for all three vehicle categories analysed there was a clear long-term trend towards more occupant safety in terms of casualties per vehicles registered and per vehicle mileage. This was most significant for car occupants but it can be seen for bus/coach occupants and goodsvehicle occupants as well. Figures of killed occupants and of casualties related to person-kilometres are calculated and displayed for the shorter period 1995 to 2012. Here it becomes obvious that the bus/coach is still the safest mode of transport for the occupants of road vehicles. Graphs for the casualty risk indices still show significantly higher risks for car occupants despite the corresponding curve moved sustainable downwards. It is remarkable, that the risks of being killed or injured for the occupants of urban buses is growing whereas the corresponding risk for the occupants of coaches in line traffic tends downwards. The article ends with a short comparison and discussion of the risk indicators which are actually published for the occupants (driver and passengers) of cars and the passengers of buses/coaches, railroads, trams and airplanes. The interpretation of such information depends on the perception and it seems that for a complete view not only one indicator should be used and the evolutions of the indicator values during longer periods (as displayed with examples in the paper) should also be taken into account.
Many safety-relevant tasks in control or diagnostics require binary choices such as "conflict versus separation" in air traffic control, "normal versus pathological" when interpreting x-ray pictures, or "permitted versus forbidden" when inspecting airport security scans. Deciders often are uncertain, but nevertheless required to decide between two alternatives, that is, they have not only to decide upon an action, but also about the admissible level of uncertainty. If the accepted level of judgment certainty is not taken into account, the sequence of decisions does not capture the full picture of the underlying decision process. Differences in judgment certainty are relevant, because they reflect not only the adequacy of the human-machine interface that is evaluated, but also the differences in expertise of the decider and the requirements of the actual situation or task. Therefore, capturing both judgment certainty and discrimination performance is essential. A comparison of different human-machine-interfaces (for air traffic control) is used to illustrate a methodological approach, which allows for integrated analyses of decision processes based on receiver-operator-characteristics and practical guidelines for the evaluation of human-machine-interfaces for safety-relevant operation procedures are provided.
Although the annual traffic accident statistics published by the national police is available in public, the detailed traffic accident data has not been released in Korea. Recently the Ministry of Land, Infrastructure and Transport recognized the importance of in-depth accident data to enhance road traffic safety and initiated a research project to establish a collection of the detailed accident data. The main objective of the project is a feasibility study to establish KIDAS (Korea In-Depth Accident Study). Within this project, three university hospitals which are located in mid-size cities have been selected to collect accident data. Annually, more than 500 cases of accidents have been collected from the in-patient's interviews and diagnosis. Unlike GIDAS (German In-Depth Accident Study), currently on-site investigation can"t be performed by the Korean police. The only available data is patient medical records, patient's description of accident circumstances and the damaged vehicle. Occasionally the police provide the accident investigation reports containing very brief information on accident causation and vehicle safety. In a first step, the concept of KIDAS is to adopt the format of iGLAD (Initiative for the Global Harmonization of Accident Data) for harmonization. Since the currently collected accident information is extremely limited compared with GIDAS, the other sources of data and calculations such as KNCAP vehicle data, pc-crash simulations, vehicle registration information, insurance company data are utilized to complete the iGLAD template. Results from KIDAS_iGLAD and the cases of assessment of active safety devices such as AEBS, ESC, and LDWS will be evaluated.
Für dieses Forschungsvorhaben wurden ca. 2.000 im Verkehr zugelassene Fahrzeuge der Fahrzeugklassen M1/N1, die mit dem OBD-System ausgerüstet sind und ab 01.01.2006 erstmals zum Verkehr zugelassen wurden, im Rahmen der regelmäßigen technischen Überwachung (-§ 29 StVZO) bezüglich der Ergebnisse der OBD-Prüfung und der Endrohrmessung untersucht. Die Untersuchungen wurden dabei von nationalen Überwachungsinstitutionen ausgeführt. Die Prüfungen erfolgten exakt nach den Vorgaben, die in der AU-Richtlinie vom 07.05.2012 (Verkehrsblatt 2012, S. 330) festgelegt sind. Auch wenn gemäß der AU-Richtlinie nach Abfrage des OBD-Systems auf eine anschließende Endrohrmessung verzichtet werden konnte, wurde diese im Rahmen des Forschungsvorhabens zusätzlich durchgeführt. Die Untersuchungen wurden als zufällige Auswahl (tageweise Vollerhebung) und prinzipiell zu gleichen Teilen für Fahrzeuge mit Otto- und Dieselmotoren durchgeführt. Die Untersuchungen fanden im Zeitraum zwischen September 2012 und März 2014 statt. Es wurden die Ergebnisse von 975 Untersuchungen an Fahrzeugen mit Ottomotor sowie 921 Untersuchungen an Fahrzeugen mit Dieselmotor von FSD untersucht und ausgewertet. Untersuchungen mit unvollständigen Daten, nicht plausibler Dokumentationen, nichtbestandener Sichtprüfung, nicht herstellbarer Kommunikation zwischen dem AU-Gerät und dem Fahrzeug oder nicht vollständiger Prüfbereitschaftstests wurden für die weitere Auswertung, d. h. für den Vergleich der Ergebnisse der OBD-Abfrage und der Endrohrmessung verworfen. Die Auswertung erfolgte getrennt nach Diesel- und Ottomotor sowie Euro-Stufen. Damit wurde eine belastbare Datenbasis erarbeitet, die den Umfang von Abweichungen (in Bezug auf "bestanden" / "nicht bestanden") zwischen dem Ergebnis der Messung am Auspuff und der Abfrage des On-Board-Diagnosesystems aufzeigt.