Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (20)
- Konferenzveröffentlichung (12)
- Bericht (3)
- Wissenschaftlicher Artikel (2)
Schlagworte
- Rechenmodell (37) (entfernen)
Institut
There is a need for detecting characteristics of pedestrian movement before car-pedestrian collisions to trigger a fully reversible pedestrian protection system. For this purpose, a pedestrian sensor system has been developed. In order to evaluate the effectiveness of the sensor system, the in-depth knowledge of car-pedestrian impact scenarios is needed. This study aims at the evaluation of the sensor system. The accident data are selected from the STRADA database. The accident scenarios available in this database were evaluated and the knowledge of the most common scenarios was developed in terms of the pedestrian trajectory, the pedestrian speed, the car trajectory, the car velocity, etc. A mathematical model was then established to evaluate the sensor system with different detective angles. It was found that in order to detect all the pedestrians in the most common scenarios on time the sensor detective angle must be kept larger than 60 degrees.
Validation of human pedestrian models using laboratory data as well as accident reconstruction
(2007)
Human pedestrian models have been developed and improved continually. This paper shows the latest stage in development and validation of the multibody pedestrian model released with MADYMO. The biofidelity of the multibody pedestrian model has been verified using a range of full pedestrian-vehicle impact tests with a large range in body sizes (16 male, 2 female, standing height 160-192cm, weight 53.5-90kg). The simulation results were objectively correlated to experimental data. Overall, the model predicted the measured response well. In particular the head impact locations were accurately predicted, indicated by global correlation scores over 90%. The correlation score for the bumper forces and accelerations of various body parts was lower (47-64%), which was largely attributed to the limited information available on the vehicle contact characteristics (stiffness, damping, deformation). Also, the effects of the large range in published leg fracture tolerances on the predicted risk to leg fracture by the pedestrian model were evaluated and compared with experimental results. The validated mid-size male model was scaled to a range of body sizes, including children and a female. Typical applications for the pedestrian models are trend studies to evaluate vehicle front ends and accident reconstructions. Results obtained in several studies show that the pedestrian models match pedestrian throw distances and impact locations observed in real accidents. Larger sets of well documented cases can be used to further validate the models especially for specific populations as for instance children. In addition, these cases will be needed to evaluate the injury predictive capability of human models. Ongoing developments include a so-called facet pedestrian model with a more accurate geometry description and a more humanlike spine and neck and a full FE model allowing more detailed injury analysis.
This study is aimed to investigate the correlations of impact conditions and dynamic responses with the injuries and injury severity of child pedestrians by accident reconstruction. For this purpose, the pedestrian accident cases were selected from Sweden and Germany with detailed information about injuries, accident cars, and accident environment. The selected accident cases were reconstructed using mathematical models of pedestrian and passenger car. The pedestrian models were generated based on the height, weight, and age of the pedestrian involved in accidents. The car models were built up based on the corresponding accident car. The impact speeds in simulations were defined based on the reported data. The calculated physical quantities were analyzed to find the correlation with injury outcomes registered in the accident database. The reconstruction approaches are discussed in terms of data collection, estimating vehicle impact speeds, pedestrian moving speeds and initial posture, secondary ground impact, validity of the mathematical models, as well as impact biomechanics.
The first stage of the work has been to collate information on bridge assessment from the participating countries. In the later stages, the aim is to provide guidelines that reflect the current best practices, a methodology that will allow for future development and sufficient flexibility to accommodate variations in national priorities as the process of harmonisation is pursued. The following tasks fall within the scope of the project: (1) a review of current procedures and standards used for bridge assessment in Europe; (2) the development of models for taking into account the bridge specific traffic conditions and material properties; (3) the use of reliability methods based on a probabilistic approach for bridge assessment including the use of measurements for updating the reliability of structural elements; and (4) the provision of recommendations for methods and procedures that can be adopted for the assessment module of the management framework highlighting where further development will be beneficial.
This paper provides an overview of the research work of the European Enhanced Vehicle-safety Committee (EEVC) in the field of crash compatibility between passenger cars. Since July 1997 the EC Commission is partly funding the research work of EEVC. The running period of this project will be two years. The progress of five working packages of this research project is presented: Literature review, Accident analysis, Structural survey of cars, Crash testing, and Mathematical modelling. According to the planned time schedule the progress of research work is different for the five working packages.
Im Rahmen der Erhaltung bestehender Straßen ist die Erfassung und Bewertung der Tragfähigkeit von großer Bedeutung. Zu deren Messung stehen statische, quasistatische und dynamische Verfahren zur Verfügung. Seit etwa 20 Jahren wird weltweit die dynamische Messmethode mit dem Falling Weight Deflectometer (FWD) angewendet. Die mit dem Falling Weight Deflectometer (FWD) gemessenen Deflexionen werden meistens unter vereinfachten Annahmen bezüglich der Last, der Materialgesetze für verschiedene Schichten und der dynamischen Effekte analysiert. Um einen Überblick über die wissenschaftlichen Veröffentlichungen zu erhalten, wurde eine Literaturstudie durchgeführt, aus der sich folgende Gliederung ergab: - Arbeits- und Wirkungsweise des FWD, - Rückrechnungsmethoden, - Interpretierbarkeit der FWD-Messergebnisse, - Vergleich verschiedener Rückrechnungsprogramme, - Vergleich verschiedener FWD-Geräte, - Vergleich FWD mit anderen Messverfahren, - Sonstiges. Ein Ergebnis dieser Literaturstudie ist, dass eine theoretische Analyse des FWD-Verfahrens, wie sie in diesem Forschungsvorhaben durchgeführt wurde, noch nicht existiert. Darüber hinaus wurde das FWD-Verfahren detailliert mathematisch-physikalisch analysiert. Anhand der mathematisch-physikalischen Analyse des FWD-Verfahrens wird deutlich, das die E-Moduli elasto-statisch zurückgerechnet werden können. Allerdings kann die Dämpfung ab einer Deflexion von etwa größer gleich 0,4 mm die Messergebnisse des Falling Weight Deflectometer beeinflussen. Wie sich die Dämpfung auf die Messergebnisse auswirkt müsste analysiert werden. Darüber hinaus konnte nachgewiesen werden, dass die Dispersion zu keiner nennenswerten Verfälschung der Impulsform führt. Des weiteren wurden Deflexions-, Einsenkungs- und Krümmungsmessungen auf ehemaligen Untersuchungsstrecken und auf Strecken aus den jungen Bundesländern durchgeführt. Anhand der Messergebnisse auf ehemaligen Untersuchungsstrecken wurden die Schicht-E-Moduli zurückgerechnet und interpretiert. Hierzu wurden folgende Programme verwendet: - Mehrschichtenprogramm, - FWD-Rückrechnungsprogramm, - PROBE90-Programm und - Finite-Element-Programm. Zur Überprüfung der Rückrechnungsergebnisse erfolgten Asphalt-E-Modul-Bestimmungen im Labor.
Mit einem Simulationsmodell wurden die Auswirkungen des Lkw-Überholverbots auf zweistreifigen Richtungsfahrbahnen in der Ebene und an Steigungsstrecken untersucht. Dabei wurde ein Einfluss von Anschlussstellen und von vorausliegenden Abschnitten (zum Beispiel Baustellen, Rückstau) ausgeschlossen. In Abhängigkeit vom Lkw-Anteil und von der Verkehrsstärke wurden Bereiche aufgezeigt, in denen sich die Geschwindigkeit des Verkehrsflusses steigert und in denen sich die Anzahl der Konfliktsituationen beim Fahrstreifenwechsel reduziert. Eine Umsetzung der Ergebnisse in ein Steuerungverfahren von Wechselverkehrszeichenanlagen ist damit möglich. Vor einer Anordnung des Lkw-Überholverbots mit statischer Beschilderung kann mit dem entwickelten Modell berechnet werden, zu welchen Tageszeiten und ab wieviel Tonnen (zum Beispiel größer 4 t) eine solche Anordnung sinnvoll ist.