Sonstige
Filtern
Erscheinungsjahr
- 2013 (70) (entfernen)
Dokumenttyp
- Konferenzveröffentlichung (40)
- Buch (Monographie) (30)
Volltext vorhanden
- ja (70) (entfernen)
Schlagworte
- Deutschland (70) (entfernen)
Institut
Nowadays human-created systems are increasing in complexity due to the interaction of humans and technology. Especially road traffic systems are composed of multitudinous resources (e.g. personnel, vehicles, organizations, etc.), which make it even harder to anticipate the positive and negative effects on safety. One key in achieving a significant reduction of fatalities is seen in driver assistant systems counterbalancing the lack of drivers' capabilities. But the actual outcome of implementing these sophisticated technologies especially on influencing driver's capabilities are yet unknown. Latest research exemplifies an increase of reaction times of drivers in case of dysfunctional driver assistant systems. This research paper applies STAMP/STPA (STAMP = systems-theoretic accident model and processes; STPA = systems-theoretic process analysis) to the German automobile traffic system focusing on the effects of driver assistant systems on drivers. By doing so, the potential hazards caused by technology can be identified.
With an ever rising human life expectancy the share of elderly people in society is constantly rising. This leads to the fact that at the same rate the share of people with age related diseases such as dementia and poor eyesight taking part in traffic will rise and therefore traffic accidents caused by this group of people due to the disease will play an ever greater role. This Situation will be among the future challenges of road safety work. At present this study displays specific characteristics of accidents caused by elderly car drivers (aged 65 or higher) based on the analysis of the German In-Depth Accident Study GIDAS. Herein almost 1000 elderly car drivers were identified as accident participants in the years 2008 to 2011. The focus of this study lies on identifying special types of accidents which are caused by elderly drivers and on characterizing these types with the information gathered on scene and by interviewing the participants. The main evidence analyzed is the knowledge about the accident locality, the trajectories of the participants as well as the reasons for the occurrence of the accidents. Furthermore personal information such as the personal condition before the accident and driving purposes is used to identify patterns of contributing circumstances for accidents caused by elderly traffic participants.
Since 2008, the authors inspected fatal traffic accidents on the spot every year, with the cooperation of Toyota police station in Aichi pref. In the jurisdiction, numbers of fatal accidents were 18 in 2008, 12 in 2009, 14 accidents in 2010, and 16 in 2011. We here report the results of our analysis of information obtained by detailed inspection for those that occurred from 2008 to 2010. We focused on vehicle-to-pedestrian accidents, which accounted for about 45% of all accidents in 2008. Because many accidents occurred on residential roads not far from pedestrians" homes, it was revealed that the decrease of the collision speed by traffic calming such as humps and zone speed management, was highly effective. On the other hand, pedestrian detection technologies seemed to be also effective as a countermeasure on vehicle side. Every pedestrian position against a vehicle was clarified and TTC (Time to Collision) was calculated provisionally. Pedestrian accidents in intersections were also examined. Among the intersection pedestrian accidents within the jurisdiction, compared with the national average in Japan, the ratio of intersections without a signal and the ratio without a pedestrian crossing were high. According to the comparison of the Japanese traffic accident patterns between 2001 and 2008, pedestrian accidents during turning right and turning left did not decrease much. For elderly drivers, these accidents occurred very often. Finally, single vehicle accidents were analysed with the accident pattern analysis methods used above. There were high numbers of single vehicle accidents against object on single roads. Although fatal accidents against guardrails decreased, the numbers of fatal accidents against a utility pole and a sign pole were nearly constant. As for the impact with narrow width objects such as utility poles, the fatality rate was very high, and countermeasures of both road infrastructure and vehicles seem to be effective.
Die Bedeutung von Standards allgemein und Schnittstellenstandards in besonderem Maße sowie zugehöriger Standardisierungsprozesse hat in den letzten Jahren massiv zugenommen. Vor dem Hintergrund und den Zukunftsaufgaben von Intelligenten Verkehrssystemen (IVS) führt die Konvergenz der Branchen Telekommunikation, Medien und Informationstechnologie dazu, dass ehemals feste Grenzen zwischen der Kommunikation und Information zusehends verschwimmen. Gleichermaßen besteht in der Verkehrstelematik zunehmend Bedarf an nachhaltigen Standard-Schnittstellenlösungen zur Sicherstellung der Interoperabilität der Systeme und deren Komponenten, dies verstärkt aufgrund der Proliferation von Sensorsystemen durch zunehmende Ausstattung mit miniaturisierten Chipelementen. Analog trifft dies auch für die Automobiltechnik und deren Vernetzung in kooperativen Verkehrs- und Fahrerassistenzsystemen mittels C2X-Kommunikation zu. Die Standardisierungsforschung ist dementsprechend ein vergleichsweise noch junges Forschungsgebiet. Dies gilt sowohl für die nationale als auch internationale Ebene. Zur Bewältigung des ansteigenden Datenaufkommens bei gleichzeitig technologisch kürzer werdenden Innovationszyklen sind umso mehr effiziente Standardisierungsprozesse erforderlich, um aus übergreifendem Datenaustausch nachhaltig Nutzen für das Verkehrsmanagement schöpfen zu können. Besonders an die Akteure der Standardisierung offener Systeme der Straßenverkehrstelematik stellen sich neue Herausforderungen und Fragen hinsichtlich der Organisation eines hierfür geeigneten Standardisierungsprozesses. Die Forschungsarbeiten im FE-Projekt 63.0013/2009/BASt unterstützen die Vorbereitung der Entscheidung auf staatlicher Ebene über die zukünftige Positionierung der öffentlichen Hand bezüglich der Begleitung und Unterstützung von Standardisierungsaktivitäten offener Systeme im Sektor kommunal eingesetzter Straßenverkehrstelematik. Untersucht werden hierzu die seit Beginn in Deutschland im Jahre 1999 bisherig im Standardisierungsprozess OCIT (Open Communication Interface for Road Traffic Control Systems) und OTS (Open Traffic Systems) erzielten und künftig bei weitergehender Standardisierung zu erwartenden Nutzwirkungen und Risiken. Berücksichtigt werden in Hinblick auf den im November 2011 zur künftigen Harmonisierung der Standardisierung offener Schnittstellen gegründeten Standardisierungsverbund OCTS (Open Communication Standards for Traffic Systems) dabei die erwachsenden Einflussfaktoren und Anforderungen aus affinen Standardisierungsaktivitäten sowie EU-Richtlinien, insbesondere zu kooperativen IVS.
Zur Überwachung der Verkehrsentwicklung und zur Ermittlung der Verkehrsstärken auf den Bundesfernstraßen - Bundesautobahnen und Bundesstraßen - fand im Jahre 2010 wieder eine bundesweite Straßenverkehrszählung (SVZ 2010) im Rahmen des üblichen Fünfjahres-Turnus statt. Die Länder hatten die Möglichkeit, auch das nachgeordnete Netz (Landes- und Kreisstraßen) zu zählen und im Rahmen der SVZ 2010 auswerten zu lassen. Von dieser Möglichkeit machten nicht alle Länder Gebrauch, so dass bundesweit nur 59 % der Landesstraßen und nur 34 % der Kreisstraßen mit Zählungen abgedeckt waren. Zu diesen beiden Straßenkategorien können somit keine allgemeinen Aussagen getroffen werden. Der vorliegende Bericht beinhaltet mittlere DTV und Jahresfahrleistungen, differenziert nach Fahrzeugarten und Straßenklassen für das Bundesgebiet insgesamt und für jedes einzelne Bundesland. Außerdem sind Beschreibungen zur Berechnung der DTV- und Fahrleistungsstatistiken enthalten sowie einige Ausführungen zu Entwicklungen der mittleren DTV-Werte und Jahresfahrleistungen in Bezug auf 2005.
Zur Überwachung der Verkehrsentwicklung und zur Ermittlung der Verkehrsstärken auf den Bundesfernstraßen - Bundesautobahnen und Bundesstraßen - fand im Jahr 2010 wieder eine bundesweite Straßenverkehrszählung (SVZ 2010) im Rahmen des üblichen Fünfjahres-Turnus statt. Die Länder hatten die Möglichkeit, auch das nachgeordnete Netz (Landes- und Kreisstraßen) zu zählen und im Rahmen der SVZ 2005 auswerten zu lassen. Bundesweit war der Zählumfang auf diesen Straßen jedoch zu gering, um allgemeine, für das gesamte Bundesgebiet gültige Aussagen für diese Straßenkategorie zu treffen. Der vorliegende Bericht beinhaltet eine detaillierte Beschreibung der Erhebungs- und Hochrechnungsmethodik zur Ermittlung der durchschnittlichen täglichen Verkehrsstärken (DTV) sowie eine Darstellung der Berechnung von Kenngrößen (Bemessungsverkehrsstärken und Werte für "Lärmberechnungen", für die eine vorherige Ermittlung der DTV-Werte Voraussetzung ist. Die methodischen Erläuterungen werden ergänzt durch beispielhafte Berechnungen. Am Ende des Berichtes steht ein Vergleich mit der Straßenverkehrszählung 2005, in dem auf wesentliche Änderungen und deren Auswirkungen eingegangen wird.
Der Weg zur Schule soll für alle Kinder möglichst sicher sein. An vielen Orten gibt es auf dem Schulweg allerdings Gefahrenstellen, zum Beispiel unübersichtliche Kreuzungen, Ampeln mit langer Wartezeit oder sehr schmale Gehwege. In solchen Fällen kann ein Schulwegplan die Sicherheit der Schülerinnen und Schüler deutlich verbessern. Der Schulwegplan ist eine kartografische Darstellung des Umfelds einer Schule, die sichere Querungsstellen, Gefahrenstellen und deren Bewältigung sowie günstige Wege vom Wohnort der Kinder zur Schule aufzeigt. Schulwegpläne sind in den meisten Bundesländern nicht verbindlich vorgeschrieben. Dort, wo Schulwegpläne "empfohlen" werden oder "verbindlich" zu erstellen sind, sind konkrete Hinweise für die Art der Umsetzung in der Regel nicht verfügbar. Der Leitfaden wendet sich deshalb an Laien - Eltern, Schulen, Kommunen, Polizei und alle, die einen Schulwegplan mit vertretbarem Aufwand selbst erstellen wollen. Einleitend werden beispielhaft Schulwegpläne für Grundschulen und weiterführende Schulen vorgestellt. Um in den "Prozess Schulwegplan" einsteigen zu können, werden Informationen zur Startphase gegeben und die nötigen Bestandsaufnahmen und Analysen erläutert. Es wird dargestellt, wie hochwertige Schulwegpläne selbstständig und ohne Zusatzkosten erstellt werden können und wie anschließend eine Wirkungskontrolle zur Überprüfung der Maßnahmen durchgeführt wird. Des Weiteren werden Hinweise auf weitere Vorlagen und Materialien, die ergänzend genutzt werden können, gegeben.
The paper aims to study the injury risk and kinematics of pedestrians involved in different passenger vehicle collisions. Furthermore, the difference of pedestrian kinematics in the accidents involved minivan and sedan was analyzed. The 18 sample cases of passenger car to pedestrian collisions were selected from the database of In-depth Investigation of Vehicle Accident in Changsha of China (IVAC),of which the 12 pedestrian accidents involved in a minivan impact for each case, and the 6 accidents in a sedan impact for each. The selected cases were reconstructed by using mathematical models of pedestrians and accident vehicles in a multi-body dynamic code MADYMO environment. The logistic regression models of the risks for pedestrian AIS 3+ injuries and fatalities were developed in terms of vehicle impact speed by analyzing the minivan-pedestrian and sedan-pedestrian accidents. The difference of pedestrian kinematics was identified by comparing the results from reconstructed pedestrian accidents between the minivans and sedans collisions. The result shows that there is a significant correlation among the impact speed and the severity of pedestrian injuries. The minivan poses greater risk to pedestrian than sedan at the same impact speed. The kinematics of pedestrian was greatly influenced by vehicle front shape.
Analysis of the accident scenario of powered two-wheelers on the basis of real-world accidents
(2013)
For the first time since 20 years the German national statistics of traffic accidents revealed an increasing number of fatalities and seriously injured persons in 2011. This negative development was especially caused by increasing numbers in all groups of vulnerable road users (VRU). Furthermore, the comparison of fatality reduction rates between several categories of road users shows that persons on motorcycles show the worst performance over years. Although every second fatality in German traffic accidents is still a car occupant, users of PTW make up more than 20% in the meantime. Assuming further improvements in the field of occupant protection this trend will continue. For that reason, a study on the basis of real-world accidents was conducted to describe the accident scenario involving motorcycles and to identify the reasons of the above-described fact. Approximately 1.800 motorcycle accidents out of GIDAS database were used for the analyses. The first part of the study deals with the question how representative the GIDAS database is for the German motorcycle accident scenario. Afterwards, detailed descriptive statistics on motorcycle accidents were presented considering numerous parameters about the accident scene, environmental influences, vehicle information, individual characteristics, interview data, injury severity and injury causation. One important point is the identification of the most frequent critical situations that are typical for motorcycle accidents. Furthermore, a special focus was on accident causation. Finally, conspicuous facts out of the analysis are emphasized. All in all, the study gives a comprehensive overview about the German motorcycle accident scenario. One the one hand, the use of weighted GIDAS data allows representative and robust statements on the basis of large case numbers; on the other hand highly detailed conclusions can be drawn. The results of the study help to understand the particularities of motorcycle accidents and provide approaches for further improvements in the field of PTW safety.
The grip between the road surface and vehicle tires is the physical basis for the moving of all vehicles in road traffic. In case of an accident the available grip level is one of the most relevant influence factors, influencing the causation and the procedure of the accident. However, the estimation of the grip level is not easy and therefore, is commonly not done on the accident scene. This is especially true for the measurement of the water depth. Until now, real accident databases provide no measurement data about the grip level and the water film depth and thus, the estimation of its influence is not possible yet. From the tyre manufacturers point of view, it is important to know about the road conditions (namely grip level, macro-texture, water depth, temperature) at the accident scene, as well as the operating conditions of the vehicles (braking, loss of control, speed, etc). These data is necessary to define relevant tyre traction tests for the end-user and for regulations. For this reason VUFO and Michelin developed a consistent method for the measurements of grip level and water depth for the accidents of the GIDAS database. The accident research team of Dresden, which documents about 1000 accidents with at least one injured person every year, is measuring the micro-roughness and the macro-roughness directly on the spot. For the measurement of the micro-roughness a Skid Resistance Tester (British Pendulum) is used. The Mean Texture Depth (describing the macro-roughness) is measured by the Sand Depth Method. Since June 2009, measurements for more than 700 accidents including 1200 participants have been carried out. In case of wet or damp road conditions during the accident, the water depth is measured additionally. Therefore VUFO and Michelin developed a special measurement device, which allows measurements with an accuracy of 1/10 millimetre. The measurement point at the accident scene is clearly defined and thus, the results are comparable for all different accidents and participants. The use of the GIDAS database and the accident sampling plan allows representative statements for the German accident scenario. With this data it is possible for the first time to have an accurate view of the road conditions at the accident scene. One possibility is a more detailed estimation of hydroplaning accidents using the actually measured water depths. The development of new testing methods and new tires can be based on the real situation of the road infrastructure. Furthermore, the combination of the technical GIDAS data and the measured road surface properties can also be used for the estimation of effectiveness of several safety systems like the brake assist and/or emergency braking systems. The calculation of a reduced collision speed due to the use of a brake assist is only one example for the application of real measured grip level data.