Sonstige
The first stage of the work has been to collate information on bridge assessment from the participating countries. In the later stages, the aim is to provide guidelines that reflect the current best practices, a methodology that will allow for future development and sufficient flexibility to accommodate variations in national priorities as the process of harmonisation is pursued. The following tasks fall within the scope of the project: (1) a review of current procedures and standards used for bridge assessment in Europe; (2) the development of models for taking into account the bridge specific traffic conditions and material properties; (3) the use of reliability methods based on a probabilistic approach for bridge assessment including the use of measurements for updating the reliability of structural elements; and (4) the provision of recommendations for methods and procedures that can be adopted for the assessment module of the management framework highlighting where further development will be beneficial.
Das von der Generaldirektion (DG) XII der Kommission der EU geförderte Projekt umfasst drei Teile: (1) Eine Literaturstudie über mechanische Prüfungen an Gesteinskörnungen, die ergab, dass bei der Festigkeit der Los Angeles-Versuch als Referenzverfahren für Widerstand gegen Zertrümmerung geeignet ist. (2) Eine Serie von Ringanalysen (1993 bis 1997), die 20 Prüfverfahren zu 21 Eigenschaften von Gesteinskörnungen umfasste, unter Beteiligung von rund 50 europäischen Prüfstellen. Zu 19 Ringanalysen wurden ausführliche Berichte erstellt, die eine Beschreibung des Ringversuchs, eine statistische Auswertung einschließlich Versuchsergebnissen und die gewonnenen Präzisionsangaben enthielten. Die Berichte schlugen für einige Verfahren Verbesserungen vor und ermöglichten jeder teilnehmenden Prüfstelle, die eigene Leistung zu kontrollieren. Ein Ringversuch zur Petrographie wurde beschreibend ausgewertet. Ein Überblick über die Prüfverfahren mit dem Versuch einer Wertung ihrer Präzision wurde gegeben: Verfahren mit zufriedenstellender Genauigkeit wurden ebenso aufgezeigt wie solche, bei denen noch Schwierigkeiten vorhanden sind. Faktoren, die zur Streuung der Ergebnisse beitragen, wurden diskutiert und mögliche Verbesserungen vorgeschlagen. (3) Eine Studie über Probenahme unter unterschiedlichen Bedingungen untersuchte den Probenahmefehler, der durch Schwankungen der Produktion sowie durch die Probenahme selbst verursacht wird. 22 Probenahmen, von Transportbändern und verschiedenartigen Halden, die meisten in der Praxis vorkommenden Fälle umfassend, wurden durchgeführt. Die Proben unterschieden sich in Größtkorn, Kornabstufung und Art der Gesteinskörnung. An ihnen wurden insgesamt 575 Siebungen und 958 Ausleseversuche ausgeführt. Die Ergebnisse zeigten, dass, wenn der Probenahmefehler den Fehler des Prüfverfahrens nicht überschreiten soll, Sammelproben aus mindestens 15 Einzelproben bestehen sollten. Im Falle der Probenahme vom Band, die zu bevorzugen ist, stellt eine große Einzelprobe eine annehmbare Alternative dar, sofern die Produktion die Zusammensetzung der Körnung gut kontrolliert.
Despite the steadily declining number of pedestrian fatalities and injuries in most European countries during recent decades, pedestrian protection is still of great importance in the European Union as well as in Germany. This is because they still constitute a large proportion of road user casualties and are more likely to suffer serious and fatal injuries than most other road users. In 1999 only car occupants suffered more fatal injuries than pedestrians in Germany. In December 1998, EEVC WG 17 completed their review and updating of the EEVC WG 10 pedestrian test procedure that made it possible to evaluate the protection afforded to pedestrians by the front of passenger cars in an accident. Within the scope of this procedure, four different impactors are used representing those parts of the body which are injured very often and/or very seriously in vehicle-pedestrian-collisions. In a project executed by IKA and BASt, a small family car was tested according to the EEVC WG 17 test procedure. Afterwards modifications to the car were carried out in order to improve the pedestrian protection provided by the vehicle design. There were certain restrictions placed on the level of modifications undertaken, e.g. only minor modifications to vehicle styling and to the vehicle structures, which provide passenger protection. The redesigned vehicle was tested again using the WG 17 test procedure. The test results of the modified vehicle were compared with those of the standard vehicle and evaluated. The results show that considered measures for pedestrian protection in many areas of the vehicle front structure and the use of innovative techniques can lead to a significant reduction of the loads of pedestrians at an acceptable expense.
Umstellung der bautechnischen Bestimmungen im Brücken- und Ingenieurbau auf europäische Regelungen
(2002)
Der im November 1996 gefasste Beschluss des Bau-Koordinierungs-Normenaussschusses (NA) 07.1 "Brücken" nach einer baldmöglichen Anwendung der Eurocodes im Brückenbau wird nach Durchführung umfangreicher Vorarbeiten voraussichtlich Mitte 2002 mit der verbindlichen Einführung von DIN-Fachberichten verwirklicht werden. Seit Mitte 2001 stehen DIN-Fachberichte für die Bemessung und Konstruktion von Brücken- und Ingenieurbauwerken zur Verfügung, die in einer Erprobungsphase von etwa einem Jahr auf ihre Anwendbarkeit geprüft werden. Dies geschieht insbesondere anhand verschiedener Pilotprojekte. Die daraus gewonnenen Erfahrungen fließen in eine Fortschreibung der DIN-Fachberichte ein und sollen auch für die weitere Bearbeitung der Eurocodes bei CEN zur Verfügung gestellt werden. Gleichzeitig werden die zugehörigen vertraglichen Regelungen in den Zusätzlichen Technischen Vorschriften (ZTV) überarbeitet und zu einer ZTV-ING zusammengefasst. Die DIN-Fachberichte basieren auf den einschlägigen Eurocodes in der ENV-Fassung und den zugehörigen Nationalen Anwendungsdokumenten. Sie sind eine Zusammenfassung aller relevanten Regelungen aus den verschiedenen Eurocodes, nationalen Anpassungen und weiterhin gültigen nationalen Bestimmungen.
When the EEVC proposed the full-scale side impact test procedure, it recommended that consideration should be given to an interior headform test in addition. This was to evaluate areas of contact not assessed by the dummy. EEVC Working Group 13 has been researching the parameters of a possible European headform test procedure in four phases. Earlier stages of the research have been presented at previous ESV conferences. The conclusions from these have suggested that the US free motion headform should be used in any European test procedure and that it should be a free flight test, not guided. This research has now culminated in proposals for a European test procedure. This paper presents the proposed EEVC side impact interior headform test procedure, giving the rationale for the test and the first results from the validation phase of the test protocol.
FERSI ist eine internationale Gemeinschaft von Forschungsinstituten, die das gemeinsame Interesse an der wissenschaftlichen Forschung zur Verbesserung der Verkehrssicherheit verbindet. Nach über 10-jähriger, erfolgreicher Zusammenarbeit ist FERSI bestrebt, weiterhin einen wichtigen Beitrag der Forschung zur Lösung der Verkehrssicherheitsprobleme in Europa zu gewährleisten. Die Hauptziele von FERSI sind der internationale Erfahrungsaustausch, die Kooperation der Forschungsinstitute, die wissenschaftliche Unterstützung bei der ständigen Verbesserung der Straßenverkehrssicherheit sowie die Entwicklung und Durchführung gemeinsamer europäischer Forschungsprojekte zur Lösung von Straßenverkehrssicherheitsproblemen.
Der Allgemeine Deutsche Automobilclub e. V. (ADAC) und die Bundesanstalt für Straßenwesen (BASt) veranstalteten am 7. und 8. Oktober 2003 in Wiesbaden ihr 5. Symposium "Sicher fahren in Europa". Nach 1991, 1994, 1997 und 2000 trafen sich erneut über 200 Fachleute aus Wissenschaft, Politik, Verwaltung, Industrie, Wirtschaft und Verbänden aus ganz Europa und einigen außereuropäischen Ländern, trugen neue Forschungsergebnisse vor und erörterten aktuelle Ansätze zur Erhöhung der Sicherheit im Straßenverkehr. Dabei ging es in Vortrags- und Diskussionsbeiträgen vor allem darum, folgende verkehrspolitischen Herausforderungen und Entwicklungen für eine europaweite Verkehrssicherheitsarbeit zu beleuchten: - die Umsetzung des 3. Verkehrssicherheits-Aktionsprogrammes der EU-Kommission bis 2010, dessen Diskussion gerade begonnen hat, - die zusätzlichen Probleme und Herausforderungen für die Verkehrssicherheit, die ab 2004 durch den EU-Beitritt von 10 weiteren Mitgliedsländern entstehen, - das Bestreben vieler EU-Mitgliedsstaaten, ihre nationale Identität und ihre regionalen Besonderheiten auch auf dem Gebiet der Verkehrssicherheit zu bewahren, um die Akzeptanz und Effizienz von praktischen Maßnahmen zu sichern, ein Ziel, dem sich auch der "EU-Konvent zur Zukunft Europas" verschrieben hat. Diesen ebenso aktuellen wie grundsätzlichen Anforderungen entsprach das Veranstaltungsprogramm mit seinen verkehrspolitischen Eröffnungs-vorträgen und mit drei Fachsitzungen - zur Verbesserung der Fahrzeugsicherheit, - der Verbesserung der Straßensicherheit und - zur Verbesserung des Verhaltens von Verkehrsteilnehmern. Eine Podiumsdiskussion "Zur Harmonisierung von Verkehrsüberwachung und Sanktionen" schloss die Veranstaltung ab.
The European Enhanced Vehicle-safety Committee wants to promote the use of more biofidelic child dummies and biomechanical based tolerance limits in regulatory and consumer testing. This study has investigated the feasibility and potential impact of Q-dummies and new injury criteria for child restraint system assessment in frontal impact. European accident statistics have been reviewed for all ECE-R44 CRS groups. For frontal impact, injury measures are recommended for the head, neck, chest and abdomen. Priority of body segment protection depends on the ECE-R44 group. The Q-dummy family is able to reflect these injuries, because of its biofidelity performance and measurement capabilities for these body segments. Currently, the Q0, Q1, Q1.5, Q3 and Q6 are available representing children of 0, 1, 1.5, 3 and 6 years old. These Q-dummies cover almost all dummy weight groups as defined in ECE-R44. Q10, representing a 10 year-old child, is under development. New child dummy injury criteria are under discussion in EEVC WG12. Therefore, the ECE-R44 criteria are assessed by comparing the existing P-dummies and new Q-dummies in ECE-R44 frontal impact sled tests. In total 300 tests covering 30 CRSs of almost all existing child seat categories are performed by 11 European organizations. From this benchmark study, it is concluded that the performance of the Q-dummy family is good with respect to repeatability of the measurement signals and the durability of the dummies. Applying ECE-R44 criteria, the first impression is that results for P- and Q-dummy are similar. For child seat evaluation the potential merits of the Q-dummy family lie in the extra measurement possibilities of these dummies and in the more biofidelic response.
Motorcycle riders are one of the most vulnerable road users. Annually, on estimate 6000 people are killed in motorcycle accidents in the former 15 EU countries. The objective of this research was to investigate and analyze the main aspects and causes of this vulnerability and the accidents in general. For this aim around 70 accidents in The Netherlands were investigated in the framework of an international research program (MAIDS). Also a control group of motorcycles with riders was investigated so that exposure could be taken into account. An important result is that human failure is in 82% of the cases the main cause of the accident, in 52% this is due the other vehicle driver. Perception and decision failures are the most common failures. The most injuries are caused by the environment but they are typically only less severe (AIS1). Injuries caused by the car (front and side) are typically severe injuries (AIS4+). Previous convictions of the MC rider seem to be related to the chance to get involved in an accident. It was shown that the Dutch and the total MAIDS accident sample are comparable.
Road safety is a major preoccupation of the European Commission and the road transport industry and depends on numerous significant factors. In order to improve road safety and to plan effective safety improvement actions for truck transport, we must first identify the problems to be addressed, i.e. what are the main causes of truck accidents. The ETAC project, initiated by the European Commission and the IRU, was launched in order to set up a heavy goods vehicle accident causation study across European countries to identify future actions which could contribute to the improvement of road safety. The results will be based on a detailed analysis of truck accident data collected in seven European countries according to a common methodology which has been elaborated through numerous national and European projects. This paper describes the common methodology used to collect the information on the scene of the accident and to analyse the data so that the reconstruction of the crash events may be carried out. CEESAR proposes a methodology using its experience gained from over 10 years of accident data collection. This methodology is based on an in-depth investigation of the parameters involved in-an accident and linked to the driver, the vehicle, the road and their environment. In-depth investigation requires accident investigator presence on the scene of the accident in order to collect volatile information such as marks on the road, weather conditions, visibility, state and equipment of the vehicle, driver interview. Later, passive and active information is gathered, either at the hospital for the driver, at the garage for the vehicle or on the spot for the road geometry. A reconstruction carried out with the help of specific software and the analysis of the data collected and calculated enables the identification of the main causes of the accident and the future actions to plan in order to improve road safety as regards truck traffic.