Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (386)
- Konferenzveröffentlichung (151)
- Bericht (15)
- Wissenschaftlicher Artikel (13)
- Arbeitspapier (7)
- Teil eines Buches (Kapitel) (3)
Schlagworte
- Germany (575) (entfernen)
Institut
- Sonstige (575) (entfernen)
Die Dichte des Netzes an Glättemeldeanlagen (GMA) an Bundesautobahnen ist wesentlich höher als im nachgeordneten Netz. Eine Verdichtung des Messstellennetzes analog zu Bundesautobahnen ist jedoch aus finanziellen und organisatorischen Gründen nicht realisierbar. Ziel der Forschungsvorhaben ist daher die vereinfachte Erfassung von winterlichen Fahrbahn- und Witterungszuständen, um eine wesentliche Verdichtung des Messstellennetzes unter wirtschaftlich akzeptablen Bedingungen zu ermöglichen. Hierdurch soll den Winterdienstverantwortlichen eine netzweite Beurteilung des Streckenzustandes ermöglicht werden, um die Winterdiensteinsätze anforderungsgerechter und wirtschaftlicher durchführen zu können. Im Rahmen einer Lebenszykluskostenanalyse wurden Investitions- und Betriebskostendaten von über 200 GMA ausgewertet. Die Analyse ergab durchschnittliche Investitionskosten von 38.300 € je Messstelle. Diese Kosten werden hauptsächlich durch die Art der Stromversorgung (netzgebunden/autark) sowie den Umfang und die Art der Sensorik beeinflusst. Die bei Energieverbrauchsmessungen an bestehenden GMA erfassten Daten zeigen, dass GMA teils stark unterschiedliche Leistungsverbräuche besitzen, eine energieoptimierte Ausstattung jedoch eine wirtschaftlich akzeptable autarke Energieversorgung ermöglicht. Im Winter 2011/2012 wurden in drei Meistereien Einsatzentscheidungen untersucht. GMA sind hierbei die wichtigste Informationsquelle; sie werden in über 60 % aller Entscheidungen herangezogen. Luft- und Fahrbahnoberflächentemperatur sind die wichtigsten Parameter. Große Bedeutung für die Nutzer hat vielfach auch ein Kamerabild. Wesentlich für einen wirtschaftlichen Betrieb von GMA und einen gleichbleibenden Nutzen für die Anwender ist eine hohe Zuverlässigkeit in die angezeigten Messdaten. Daher sollte die Qualitätssicherung bei Installation und laufendem Betrieb größere Bedeutung gewinnen, indem durch die Straßenbauverwaltungen neben der regelmäßigen Wartung und Kalibrierung standardisierte Abnahme- und regelmäßige Kontrollprüfungen auf Grundlage der geltenden technischen Normen vorgesehen werden.
Bereits vor rund zwanzig Jahren wurde die Entwicklung einer bundeslandübergreifenden Erhaltungsstrategie für Verkehrsflächen und Ingenieurbauwerke auf Netzebene angegangen. Zwischenzeitlich sind hierfür Erfassungs- und Bewertungsverfahren erarbeitet worden und in Betrieb. Aufbauend auf den guten Erfahrungen, die mit den bestehenden Managementsystemen gemacht wurden, erscheint es somit folgerichtig für die bislang vernachlässigten sonstigen Anlagenteile der Straße ein eigenständiges Asset Management zu entwickeln. Um die hierfür notwendige Datengrundlage zu schaffen, wurde in dem vorliegenden Forschungsprojekt mittels Literaturrecherche und bundesweiter Befragung von Verantwortlichen Erhaltungskostensätze, Nutzungsdauern sowie Ausstattungsquoten für die sonstigen Anlagenteile " beispielsweise Lichtsignalanlagen oder Schutzeinrichtungen " erhoben. Die Ergebnisse der Umfrage fußten in der Festlegung von für ein Asset Management relevanten sonstigen Anlagenteile sowie einer Untergliederung dieser in einzelne Aggregate. An den jeweiligen Anlagenteilen/Aggregaten konnten dann Leistungen der Instandhaltung, Instandsetzung und Erneuerung definiert werden, die in Kombination mit den Nutzungsdauern und den Ausstattungsquoten eine Kalkulation der benötigten finanziellen Aufwendungen für die Erhaltung der sonstigen Anlagenteile ermöglichen. Weiterer Forschungsbedarf besteht von allem bei der Verbesserung und Verdichtung der Datengrundlage sowie die Umsetzung in einem Computer-Programm nach dem Prinzip des PMS und BMS.
Es werden erste Ergebnisse des von der Bundesanstalt für Straßenwesen (BASt) geförderten Forschungsprojekts "Hauptstudie zur Wirksamkeit von Tunnelwänden als Träger photokatalytischer Oberflächen" (FE 9.0184/2011/ARB) vorgestellt. Ziel war die Erarbeitung von technischen Lösungen zur Stickoxidreduktion an einem Tunnelstandort durch die Konzeptionierung und den Bau abgeschlossener photokatalytischer Reaktoren (Tunnelkassetten) sowie deren Validierung im Tunnel "Rudower Höhe" an der Bundesautobahn A113 in Berlin. Dabei wird künstliches UV-Licht als Energiequelle für den Schadstoffabbau eingesetzt. Es wird speziell über die Modellierungen berichtet, mit Hilfe derer die Tunnelkassetten sowohl strömungstechnisch als auch in Hinblick auf den photokatalytischen Abbauwirkungsgrad optimiert wurden.
Cycling supports the independence and health of the aging population. However, elderly cyclists have an increased injury risk. The majority of injured cyclists is victim of a single-sided accident, an accident in which there is no other party involved. The aim of the project "Safe and Aware on the bicycle" is to develop guidelines for an advisory system that is useful in preventing single-sided accidents. This system is able to support the elderly cyclist; enabling the cyclist to timely adapt his cycling behaviour and improve cycling safety and comfort. For the development of such advisory system the causes of singles accidents and the wishes of the elderly cyclist must be known. First step to obtain this insight was a literature survey and an GIDAS research. Unfortunately accidentology research with GIDAS did not give the full understanding of the pre-crash situations and (especially the behaviour related) factors leading to the accident. The second step was consultation of elderly cyclist through a questionnaire (n=800), in-depth interviews (n=12) and focus group sessions (n=15). This offered complementary information and a much better understanding of the behavioural aspects. Results concern the behaviour in traffic and identify specific physical (i.e. problems looking backwards over the shoulder) and mental issues. Furthermore, the needs and wishes for support in specific cycling situations were identified. In conclusion; The GIDAS results together with the information obtained contacting the elderly cyclists enabled setting up requirements for an advisory system, which is useful in preventing single-sided accidents.
This study aimed at developing an injury estimation algorithm for AACN technologies for Germany and compared them to findings based on Japanese data. The data to build and to verify the algorithm was obtained from the German in-depth Accident Database (GIDAS) and split into a training and a validation dataset. Significant input variables and the generalized linear regression model to predict severe injuries (ISS>15) were selected to maximize area under the receiver operating characteristic curve (AUC). Probit regression with the input parameter multiple impact, delta v, seatbelt use and impact direction gave the largest AUC of 0.91. Sensitivity of the algorithm was validated at 90% and specificity at 76% for an injury risk threshold of 2%. It appears that no major differences between Japan and Germany exist for injury estimation based on delta v and impact direction. However, far side impact and multiple crash events appear to be associated with a larger risk increase in the German data.
The current paper reports on the results of a pilot study aiming to investigate the effect of mobile telephone use on the driving performance of 5 amateur and 5 professional drivers. Their driving acuity was tested through a driving simulator. Analysis and interpretation of the results occurred comparing the drivers' driving performance while talking, reading messages and writing a message on the mobile phone (intervention time) with the drivers' driving performance engaged in no activity (control time). The variables affected by the mobile phone were the "steering", the "lane offset" and the "duration of lane offset". Moreover, the drivers involved in a car crash in the last five years appeared to differ from those who were not involved in a crash in both "lane offset" and "following distance". The results of this pilot study will inform the design of a large experimental study on 50 professional and 50 amateur drivers.
SEEKING is looking for answers regarding electric powered bicycles and their relation to traffic safety issues. Does a cyclist need "E"? Is it as risky as riding a moped or are E-bikes creating conflicts with other cyclists? The project described herein, funded by the Austrian Ministry of Transport, has the aim of seeking answers to these hot topics. The SEEKING-team shows an in-depth investigation of vehicle dynamic sensing, together with subjective feedback of test riders to detect similarities and differences between conventional cycling and E-biking. Following an overview on the international status quo, measurement runs and their analyses are performed to find a set of preventative measures to make (E-)biking safer. A specific focus is the detection of curve handling, stopping and acceleration phases as well as conflict studies on course-based test rides and "real world" tests on cycling paths (naturalistic riding).
The Traffic Accident Research Institute at University of Technology Dresden investigates about 1,000 accidents annually in the area around and in Dresden. These datasets have been summarized and evaluated in the GIDAS (German Accident In-Depth Study) project for 13 years. During the project it became apparent that the specific traffic situation of a covert exit of a passenger car and an intersecting two-wheeler involves a high risk potential. This critical situation develops in a large part due to the lack of visibility between the driver and the intersecting bike. In this paper the accident avoidance potential of front camera systems with lateral field of view, which allows the driver to have an indirect sight into the crossing street area will be presented.
Assessment of the effectiveness of Intersection Assistance Systems at urban and rural accident sites
(2015)
An Intersection Collision Avoidance System is a promising safety system for accident avoidance or injury mitigation at junctions. However, there is still a lack of evidence of the effectiveness, due to the missing real accident data concerning Advanced Driver Assistance Systems. The objective of this study is the assessment of the effectiveness of an Intersection Collision Avoidance System based on real accidents. The method used is called virtual pre-crash simulation. Accidents at junctions were reconstructed by using the numerical simulation software PC-Crashâ„¢. This first simulation is called the baseline simulation. In a second step the vehicles of these accidents were equipped with an Intersection Collision Avoidance System and simulated again. The second simulation is called the system simulation. In the system simulation two different sensors and four different intervention strategies were used, based on a time-to-collision approach. The effectiveness of Intersection Collision Avoidance System has been evaluated by using an assessment function. On average 9% of the reviewed junction accidents could have been avoided within the system simulations. The other simulation results clearly showed a change in the principal direction of force, delta-v and reduction of the injury severity.
Analysis of pedestrian leg contacts and distribution of contact points across the vehicle front
(2015)
Determining the risk to pedestrians that are impacted by areas of the front bumper not currently regulated in type-approval testing requires an understanding of the target population and the injury risk posed by the edges of the bumper. National statistics show that approximately 10% of all accident casualties are pedestrians, with 20% to 30% of these pedestrian casualties being killed or seriously injured. However, the contact position across the front of the bumper is not recorded in national statistics and so in-depth accident databases (OTS, UK and GIDAS, Germany) were used to examine injury risk in greater detail. The results showed that some injury types and severities of injuries appear to peak around the bumper edges. Although there are sometimes inconsistencies in the data, generally there is no evidence to suggest that the edges of the bumper are less likely to be contacted or cause injury.