Sonstige
Filtern
Erscheinungsjahr
- 2005 (37) (entfernen)
Dokumenttyp
- Konferenzveröffentlichung (37) (entfernen)
Schlagworte
- Conference (30)
- Konferenz (29)
- Accident (20)
- Unfall (20)
- Injury (14)
- Verletzung (14)
- Fahrzeug (11)
- Vehicle (11)
- Cause (9)
- Ursache (9)
- Datenbank (8)
- Schweregrad (Unfall, Verletzung) (8)
- Data bank (7)
- Reconstruction (accid) (7)
- Severity (accid, injury) (7)
- Unfallrekonstruktion (7)
- Deutschland (6)
- Fußgänger (6)
- Germany (6)
- On the spot accident investigation (6)
- Pedestrian (6)
- Untersuchung am Unfallort (6)
- Bewertung (5)
- Evaluation (assessment) (5)
- Metal bridge (5)
- Orthotropic plate (5)
- Schweissen (5)
- Stahlbrücke (5)
- Test (5)
- Welding (5)
- Balken (4)
- Beam (4)
- Blech (4)
- Car (4)
- Data acquisition (4)
- Datenerfassung (4)
- Development (4)
- Driver (4)
- Entwicklung (4)
- Fahrer (4)
- Fahrzeugsitz (4)
- Frontalzusammenstoß (4)
- Geschwindigkeit (4)
- Head on collision (4)
- Improvement (4)
- Motorcycle (4)
- Motorrad (4)
- PKW (4)
- Prevention (4)
- Safety (4)
- Seat (veh) (4)
- Sheet (metal) (4)
- Sicherheit (4)
- Software (4)
- Speed (4)
- Verbesserung (4)
- Versuch (4)
- Accident prevention (3)
- Biomechanics (3)
- Biomechanik (3)
- Bridge (3)
- Brücke (3)
- Child (3)
- Cracking (3)
- Education (3)
- Erziehung (3)
- Europa (3)
- Europe (3)
- Fatality (3)
- Information (3)
- Insasse (3)
- Instandsetzung (3)
- Kind (3)
- Method (3)
- Orthotrope Platte (3)
- Overturning (veh) (3)
- Quer (3)
- Repair (3)
- Rissbildung (3)
- Safety belt (3)
- Sicherheitsgurt (3)
- Steife (Brücke) (3)
- Stiffener (Bridge) (3)
- Transverse (3)
- Unfallverhütung (3)
- Vehicle occupant (3)
- Verfahren (3)
- Verhütung (3)
- Überschlagen (3)
- Active safety system (2)
- Administration (2)
- Aktives Sicherheitssystem (2)
- Bau (2)
- Bearing capacity (2)
- Behaviour (2)
- Bein (menschl) (2)
- Belastung (2)
- Bridge deck (2)
- Construction (2)
- Cyclist (2)
- Damage (2)
- Decrease (2)
- Deformation (2)
- EU (2)
- Ermüdung (mater) (2)
- Fahrbahntafel (2)
- Fahrstabilität (2)
- Fatigue (mater) (2)
- Fracture (bone) (2)
- Government (national) (2)
- Highway (2)
- Information documentation (2)
- Knochenbruch (2)
- Leg (human) (2)
- Load (2)
- Longitudinal (2)
- Längs (2)
- Motorcyclist (2)
- Motorradfahrer (2)
- Orthotrope Fahrbahntafel (2)
- Radfahrer (2)
- Regierung (staat) (2)
- Risiko (2)
- Risk (2)
- Sachschaden (2)
- Simulation (2)
- Spain (2)
- Spanien (2)
- Technologie (2)
- Technology (2)
- Traffic (2)
- Tragfähigkeit (2)
- Trapezförmiger Träger (2)
- Trapezoidal beam (2)
- Tödlicher Unfall (2)
- Vehicle handling (2)
- Verformung (2)
- Verhalten (2)
- Verkehr (2)
- Verminderung (2)
- Verwaltung (2)
- Absorption (1)
- Acceleration (1)
- Activity report (1)
- Air bag (restraint system) (1)
- Airbag (1)
- Alte Leute (1)
- Anfahrversuch (1)
- Anthropometric dummy (1)
- Arbeitsgruppe (1)
- Attitude (psychol) (1)
- Auftrag (1)
- Ausrüstung (1)
- Autobahn (1)
- Autotür (1)
- Benutzung (1)
- Berechnung (1)
- Beschleunigung (1)
- Bevölkerung (1)
- Body (car) (1)
- Braking (1)
- Bremsung (1)
- Bridge surfacing (1)
- Brückenbelag (1)
- Budget (1)
- Calculation (1)
- Cantilever (1)
- Car door (1)
- Carbon dioxide (1)
- Cervical vertebrae (1)
- Coach (1)
- Concentration (chem) (1)
- Continuous (1)
- Contract (1)
- Correlation (math, stat) (1)
- Crash helmet (1)
- Data base (1)
- Dauerhaftigkeit (1)
- Digital computer (1)
- Digital model (1)
- Digitalrechner (1)
- Dummy (1)
- Durability (1)
- Dynamics (1)
- Dynamik (1)
- Efficiency (1)
- Einstellung (psychol) (1)
- Electronics (1)
- Elektronik (1)
- Energie (1)
- Energy (1)
- Entgleisung (Zug) (1)
- Environment (1)
- Equipment (1)
- Eu (1)
- Fernverkehrsstraße (1)
- Flächentragwerk (1)
- Foot (not a measure) (1)
- Forecast (1)
- Forschungsarbeit (1)
- Forschungsbericht (1)
- France (1)
- Frankreich (1)
- Front (1)
- Fuß (1)
- Geschichte (1)
- Gesetzgebung (1)
- Halswirbel (1)
- Head (1)
- Hinten (1)
- Hip (human) (1)
- History (1)
- Human factor (1)
- Hüfte (1)
- Impact sled (1)
- Impact test (veh) (1)
- Information management (1)
- Interactive model (1)
- Interaktives Modell (1)
- International (1)
- Inventar (1)
- Inventory (1)
- Japan (1)
- Karosserie (1)
- Knee (human) (1)
- Knie (menschl) (1)
- Kohlendioxid (1)
- Kontinuierlich (1)
- Konzentration (1)
- Korrelation (math, stat) (1)
- Kragarm (1)
- Körperhaltung (1)
- LKW (1)
- Lebensdauer (1)
- Legislation (1)
- Leistungsfähigkeit (allg) (1)
- Length (1)
- Life cycle (1)
- Lorry (1)
- Main road (1)
- Mathematical model (1)
- Menschlicher Faktor (1)
- Methode der finiten Elemente (1)
- Mobility (1)
- Mobilität (1)
- Model (not math) (1)
- Modell (1)
- Motorisierungsgrad (1)
- Motorway (1)
- Movement (1)
- Netherlands (1)
- Niederlande (1)
- Nigeria (1)
- Nummer (1)
- Numerisches Modell (1)
- Old people (1)
- Organisation (1)
- Organization (1)
- Oxygen (1)
- Padding (safety) (1)
- Passive safety system (1)
- Passives Sicherheitssystem (1)
- Planning (1)
- Planung (1)
- Policy (1)
- Politik (1)
- Population (1)
- Portugal (1)
- Posture (1)
- Prognose (1)
- Psychological aspects (1)
- Psychologische Gesichtspunkte (1)
- Quality (1)
- Qualität (1)
- Rear (1)
- Rechenmodell (1)
- Reinforcement (gen) (1)
- Reisebus (1)
- Reproducibility (1)
- Reproduzierbarkeit (1)
- Research project (1)
- Research report (1)
- Richtlinien (1)
- Road construction (1)
- Rotation (1)
- Sauerstoff (1)
- School (1)
- Schule (1)
- Schutzhelm (1)
- Schweden (1)
- Seitlicher Zusammenstoß (1)
- Severity (accid, injuy) (1)
- Shell (struct) (1)
- Sicherheitspolsterung (1)
- Side impact (1)
- Span (1)
- Spannung (mater) (1)
- Spannweite (1)
- Specifications (1)
- Spinal column (1)
- Statistics (1)
- Statistik (1)
- Steifigkeit (1)
- Stiffness (1)
- Strasse (1)
- Straße (1)
- Straßenbau (1)
- Stress (in material) (1)
- Sweden (1)
- Tal (1)
- Thailand (1)
- Theorie (1)
- Theory (1)
- Tätigkeitsbericht (1)
- Umwelt (1)
- United kingdom (1)
- Use (1)
- Valley (1)
- Vehicle ownership (1)
- Vereinigtes Königreich (1)
- Vermeidung (1)
- Verschiebung (1)
- Verstärkung (allg) (1)
- Vorn (1)
- Wirbelsäule (1)
- Working group (1)
- Zahl (1)
- finite element method (1)
- tödlicher Unfall (1)
Institut
- Sonstige (37) (entfernen)
Die Lastübertragung von den Fahrzeugrädern auf die Fahrbahntafel wird beschrieben, und es wird eine Übersicht der ermüdungsempfindlichen Schweissnahtbereiche von Deckblech, Längssteifen und Querträgern gegeben. Die charakteristischen Schwachpunkte der Schweissverbindungen werden in Skizzen dargestellt.
Im Beitrag wird zunächst der Begriff "Orthotrope Fahrbahnplatte" erläutert: Früher war das Konstruktionsprinzip des Brückenbaus so, dass jedes Tragglied die ihm eigene und zugewiesene Last allein zu tragen hatte und die daraus entstandenen Auflagerbelastungen an das nächste unterstützende Bauteil weitergab. So ging es von der Fahrbahn ueber Längs- und Querträger zu den Hauptträgern, und von da aus zu den Auflagern, Pfeilern, Fundamenten bis zum Baugrund. Nach dem 2. Weltkrieg wurden andere Lastabtragungsmodelle entwickelt. Bei der "Orthotropen Platte" handelt sich um eine für den Stahlbrückenbau entwickelte Bauweise, die aus einem oberen ebenen Stahlblech besteht, welches die Abdichtung und den Fahrbahnbelag trägt. Dieses wird auch Deckblech genannt. Das Deckblech wird durch ein rechtwinkliges System von längs und quer angeordneten Stahlprofilen unterschiedlicher Steifigkeit (Laengssteifen und Querträger) unterstützt. Das aus den drei Bestandteilen bestehende kombinierte System der Fahrbahntafel ist ausserdem mittragender Bestandteil des Gesamttragsystems der Brücke. An Beispielen werden die verschiedenen Möglichkeiten der konstruktiven Ausbildung der Fahrbahntafel mit ihren Vor- und Nachteilen erläutert. Es werden Hinweise zur Berechnung und baulichen Durchbildung insbesondere der Schweissverbindungen zwischen Deckblech und Längsrippen und des Stosses der Rippen (Fensterstoß) sowie zur Steifigkeit der Querträger gegeben. So genannte Trapezprofile haben sich als die günstigste Form für die Längsrippen ergeben. Sie werden auch vorteilhaft als Beulsteifen für Stege und Bodenplatten bei Kastenträgerbrücken aus Stahl und bei Verbundbrücken angewendet.
Die Brücke hat eine Länge von 660 Metern und überquert das Haseltal mit einer maximalen Höhe von 70 Metern. Sie ist ein Durchlaufträger über sieben Felder mit Stützweiten von 5 x 101,60 Metern für die Mittelöffnungen und 2 x 76,20 Metern für die Endfelder. Zwei im Abstand von 18,53 Metern angeordnete vollwandige Hauptträger unterstützen die als orthotrope Platte ausgebildete 29,30 Meter breite Fahrbahntafel. Die seitlichen Kragarme sind über 5 Meter weit gespannt. Erbaut wurde die Brücke in den Jahren 1959 bis 1961. Die konstruktive Ausbildung des Überbaus wird im Einzelnen beschrieben. Auffällig ist das geringe Flächengewicht des Überbaus von nur 248 Kilogramm je Quadratmeter. Beschrieben wird zunächst der Bauablauf mit einigen Besonderheiten, ausserdem die Prüfungen während der Bauausführung und der Zustand des Bauwerks zum Ablauf der zehnjährigen Gewährleistungszeit. Bei einer Hauptprüfung des Überbaus wurden 1983 neben anderen Schäden zahlreiche systematische Risse, besonders in den Schweissnähten festgestellt, die 1985 bis 1988 zu einer umfangreichen Instandsetzung führten. Im Jahre 2002 wurden erneut viele Risse in den Schweissnähten gefunden, die umgehend wieder instand gesetzt wurden. Es wurden jährliche Sonderprüfungen angeordnet und wegen des desolaten Zustandes des Überbaus ein Neubau beschlossen. Einzelheiten zu den Schadensursachen, die durch Gutachten und Versuche festgestellt wurden, werden dargestellt.
Detailed investigations and reconstructions of real accidents involving vulnerable road users
(2005)
The aim of this research is to improve knowledge about vulnerable road users accidents and more specifically pedestrians or cyclists. This work has been based on a complete analysis of real accidents. From accidents chosen from an in-depth multidisciplinary investigation (psychology, technical, medical), we have tried to identify the configuration of the impact: car speed, pedestrian or cyclist orientations. Then, we have made a numerical modelling of the same configuration with a multibody software. In particular, we have reproduced the anthropometry of the victim and the front shape of the car. A first simulation has been performed on this starting configuration. Next, effects of some parameters such as car velocity or victim position at impact have been numerically studied in order to find the best correlations with all indications produced by the in-depth analysis. Finally, the retained configuration was close to the presumed real accident conditions because it reproduces in particular the same impact points on the car, the same injuries, and is according to the driver statement. This double approach associating an in-depth accident analysis and a numerical simulation has been applied on pedestrian-to-car and bicyclist-tocar accidents. It has allowed us to better understand the real kinematics of such impacts. Even if this method is based on a case to case study, it underlines which parameters are relevant on a vulnerable road user accident investigation and reconstruction.
Active safety systems are aimed at accident prevention, hence the knowledge required for their development is different from that required for passive safety systems aimed at injury prevention. Particularly, knowledge about accident causation is required. When looking at existing accident causation data, it is argued it fails to explain in sufficient detail how and why the accidents occur. Therefore, there is a need for detailed micro-level descriptions of accident causation mechanisms, and also of methodologies suitable for creating such descriptions. One study addressing these needs is the Swedish project FICA (Factors Influencing the Causation of Accidents and Incidents), where an accident investigation methodology suitable for active safety is developed, and in-depth accident investigations following this methodology are carried out on-scene in the area of Gothenburg by a multidisciplinary team. A preliminary aggregated analysis of different cases shows that the methodology developed is adequate for pointing out common contributing factors and devising principal countermeasures.
Because of actual developments and the continuous increase in the field of drive assistant systems, representative and detailed investigations of accident databases are necessary. This lecture describes the possibility to estimate the potential of primary and secondary safety measures by means of a computerized case by case analysis. Single primary or secondary safety measures as well as a combination of both are presented. The method is exemplarily shown for the primary safety measure "Brake Assist" in pedestrian accidents. Regarding accident prevention only the primary safety measure is determined.
The average CO2 concentrations relevant to a motorcyclist wearing an integral helmet were measured twenty years ago and found to be alarmingly high. The present study examined gas concentrations typically inhaled by a motorcyclist. Average concentrations of CO2 for persons (n=4) wearing integral motorcycle helmets were measured in the laboratory and the field to facilitate comparison to previous work, and similarly high average concentrations were found: above 2% when stationary, well below 1% for speeds of 50km/h or more. Detailed measurements of the time-dependent CO2 concentrations during normal inhalation showed levels of about half of the corresponding average concentrations, including 1% at standstill, though higher concentrations (4% or more) are inhaled at the beginning of each breath. Opening the visor at standstill lowered the average inhaled concentration only to about 0.8%. The oxygen deficiency is equal to the CO2 concentration, and could also contribute negatively to motorcyclist cognitive abilities.
Gerhard GEYER schildert die Entwicklung seit Ende der achtziger Jahre des vergangenen Jahrhunderts und geht insbesondere auf das Verkehrswegeplanungsbeschleunigungsgesetz und das Planungsvereinfachungsgesetz sowie auf das Instrument der Investitionsmaßnahmegesetze ein. Weiterhin berichtet er über neuere Initiativen, durch die die Planung von Verkehrsprojekten beschleunigt werden soll, vor allem über die Verlängerung der Geltung des Verkehrswegeplanungsbeschleunigungsgesetzes und über die Vorschläge des Länderfachausschusses Straßenbaurecht, die in dem Eckpunktepapier zur "Beschleunigung der Planungsverfahren für Bundesfernstraßen" enthalten sind. Nachdrücklich weist der Referent auf die Notwendigkeit hin, für die durch beschleunigte Verfahren vermehrt geschaffenen Baurechte zeitgerecht Mittel zur Verwirklichung der Vorhaben bereit zu stellen. Schließlich betont er im Hinblick auf die künftige Entwicklung den wachsenden Einfluss des europäischen Rechts, insbesondere im Umweltbereich, auf die Ausgestaltung und die Dauer der Verfahren. Jutta SCHMIDT wendet sich in ihrem Referat zunächst dem Umweltinformationsgesetz " in der Fassung vom 23. August 2001 " zu, das die europäische Umweltinformationsrichtlinie aus dem Jahre 1990 in nationales Recht umgesetzt hat, um sodann die in der europäischen Umweltrichtlinie vom 28. Januar 2003 enthaltenen Neuerungen darzustellen. Im Anschluss berichtet sie über die vorgesehene Gesetzesänderung und schildert insbesondere im Hinblick auf den Begriff der Umweltinformation anhand von Beispielen aus der Rechtsprechung die Auswirkungen auf die Straßenbauverwaltung. Ulrich STELKENS behandelt in seinem Referat nicht lediglich die rechtsgeschäftliche, sondern ebenso die Vertretung des Bundes durch die Länder bei der Durchsetzung und Abwehr gesetzlicher Ansprüche zwischen den beim Vollzug der Bundesauftragsverwaltung involvierten Bundes- und Landesbehörden und Dritten. Als problematisch stellt sich dabei insbesondere die Vertretung in vermögensrechtlichen Angelegenheiten der Bundesfernstraßen dar, die auf einer Regelung in einer Allgemeinen Verwaltungsvorschrift des Bundes beruht, die historisch zu erklären ist. Nach der Rechtsprechung des Bundesverfassungsgerichts dürfte der Bund indes bei der Bundesauftragsverwaltung gerade nicht von den mit der Vollziehung von Bundesauftragsangelegenheiten betrauten Landesbehörden vertreten werden , sondern die Länder sind nach der Auffassung des Referenten berechtigt und verpflichtet, diese Aufgaben im eigenen Namen wahrzunehmen, und zwar auch in vermögensrechtlichen Angelegenheiten der Bundesfernstraßenverwaltung. Wolfgang MAß beschreibt in seinem Beitrag zunächst die Verwaltungspraxis in Bayern, die bei den verschiedenen vermögensrechtlichen Fallkonstellationen unterschiedlich vorgeht, jedoch meist das Land in Vertretung des Bundes handeln lässt, wohl in dem Bestreben, die Wahrnehmungskompetenz jeweils an die Sachfinanzierungskompetenz zu koppeln. Allerdings sind nach Ansicht des Referenten seit geraumer Zeit in Rechtsprechung und Literatur Tendenzen erkennbar, die bisherige Praxis zu erschüttern , er befürwortet eine einheitliche Regelung der Wahrnehmungskompetenz in der Vermögensverwaltung und regt eine gesetzliche Festlegung an. Richard BARTLSPERGER geht in seiner Stellungnahme von denselben Grundannahmen wie STELKENS aus, misst jedoch der Regelung des Artikel 90 Absatz 1 Grundgesetz, der dem Bund das zivilrechtliche Eigentum an den Bundesfernstraßenverwaltung zuspricht, eine größere Bedeutung zu und differenziert deshalb zwischen den Fällen, in denen die Länder unmittelbar aus dem Eigentum des Bundes fließende Rechte geltend machen " dies sei nur im Namen des Bundes möglich " und allen anderen Fällen mit vermögensrechtlichen Bezug, bei denen die Länder entsprechend der Rechtsprechung des Bundesverfassungsgerichts außenwirksame Maßnahmen im eigenen Namen wahrzunehmen hätten. Im Ergebnis mahnt daher auch BARTLSPERGER einen sorgfältigeren Umgang mit den verfassungsrechtlichen Vorgaben bei der Vermögensverwaltung der Bundesfernstraßen an.
This contribution introduces a number of psychological methods of analysis that are based on the practice-oriented collection of information directly at the site of an accident and that allow for an analysis and coding of the accident causes. Investigation examples and examples of the data combinations with basic medical and technical data are outlined. Objective of the collection is the inter-disciplinary investigation of human factors in the causes of accidents ("human-factor-analysis"). The psychological data are incorporated according to an integrative model for accident causes based on empiric algorithms in the data base of the accident research, where the clustered evaluation potential of comprehensive factors of the accident development can be illustrated. The central theoretical concept for the basic model of the progress of the accident from a psychological point of view comprises psychological indicators for the evaluation of the site of the accident for the analysis of the perception conditions as well as a classification of the gleaned data into the accident progress model according to chronological and local criteria. Perception conditions, action intentions and executions as well as conditions limiting perception and actions are acquired, using a questionnaire for persons involved in an accident, and are also integrated into the data structure concerning weighted feature characteristics as well as combined with other relevant features. Suitable systematization tools for the collection and coding of psychological accident development parameters have to be provided, which require primarily a model image of the corresponding processes from the persons involved in the accident (perceptions, expectations, decisions, actions). The interactive accident model contains components of the models by KÜTING 1990, MC DONALD 1972, SURREY 1969 and RASMUSSEN 1980. Based on the inter-action of the three partial systems "person", "vehicle" and "environment", the first step is the assessment of the situation by the persons involved in the accident. This is dependent on the personal attitudes and motives, on experiences and expectations concerning the progress of the situation. Subsequently, data concerning the manner of the coping with the ambiguous state as well as with the instable state (emergency reaction immediately before the accident occurs) are collected. The factors relating to the persons involved in the accident are gathered on several levels using corresponding questionnaires. The coding of the found and collected characteristics is conducted in a multidimensional evaluation relating to the technical results of the accident reconstruction and of the psychological classification, which are subsequently integrated in coded form into the data base of the accident research. The result of this analysis is a description of the development of the accident depicted on a chronological vector from a perception and decision theoretical perspective. This is explained in detail using exemplary cases.
The European Enhanced Vehicle-safety Committee wants to promote the use of more biofidelic child dummies and biomechanical based tolerance limits in regulatory and consumer testing. This study has investigated the feasibility and potential impact of Q-dummies and new injury criteria for child restraint system assessment in frontal impact. European accident statistics have been reviewed for all ECE-R44 CRS groups. For frontal impact, injury measures are recommended for the head, neck, chest and abdomen. Priority of body segment protection depends on the ECE-R44 group. The Q-dummy family is able to reflect these injuries, because of its biofidelity performance and measurement capabilities for these body segments. Currently, the Q0, Q1, Q1.5, Q3 and Q6 are available representing children of 0, 1, 1.5, 3 and 6 years old. These Q-dummies cover almost all dummy weight groups as defined in ECE-R44. Q10, representing a 10 year-old child, is under development. New child dummy injury criteria are under discussion in EEVC WG12. Therefore, the ECE-R44 criteria are assessed by comparing the existing P-dummies and new Q-dummies in ECE-R44 frontal impact sled tests. In total 300 tests covering 30 CRSs of almost all existing child seat categories are performed by 11 European organizations. From this benchmark study, it is concluded that the performance of the Q-dummy family is good with respect to repeatability of the measurement signals and the durability of the dummies. Applying ECE-R44 criteria, the first impression is that results for P- and Q-dummy are similar. For child seat evaluation the potential merits of the Q-dummy family lie in the extra measurement possibilities of these dummies and in the more biofidelic response.