Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
Schlagworte
- Motorrad (27) (entfernen)
Institut
- Sonstige (27) (entfernen)
Since 2005, the motorcycle crash fatalities in the US exceeded 10% of the overall annual traffic fatalities. Consequently, it has become critical to gain in-depth understanding of the factors and characteristics contributing to motorcycle crashes. Unfortunately, there currently exists no database gathering the necessary information for an in-depth analysis of the US motorcycle crashes. So this study utilizes the NASS/CDS database (National Automotive Sampling System, Crashworthiness Data System) in order to gain insights into the patterns and factors leading to a NASS/CDS motorcycle crash, from 1997 to 2007. NASS/CDS samples about 5,000 passenger car tow-away crashes per year. Each case includes photographs and detailed data on crash and pre-crash characteristics, vehicle types, trajectories, types of impact, and other pertinent roadway and crash scene information, allowing an in-depth investigation of the crash mechanisms. However, the NASS/CDS sampling process specifically focuses on passenger car crashes, so the cases extracted only correspond to crashes in which a passenger vehicle was towed, and a motorcycle was somehow involved. Thus, a by-hand in-depth review of about 200 cases allowed retrieving 106 relevant crashes for this study, tending to represent the severe passenger vehicle(s) versus motorcycle(s) crashes on US roads. The findings lead to the conclusion that these crashes mostly result from the low conspicuity of the motorcycle, and from the inability of the car drivers to fully appreciate and anticipate the behavior of a motorcycle. Indeed, it has been shown that, first, the car drivers involved in these cases did not attempt any avoidance maneuver, second, they were largely of ages under 25, and finally, the majority of the crashes were in an intersection scenario. In addition, the two major scenarios unveiled were the car attempting a left turn from the opposite direction and the car attempting a left turn from the right. The paper mentions several solutions to enhance the motorcycle- conspicuity and to allow the car drivers to better anticipate its behavior, which seem to be key factors in the intersection-related crashes (and more generally in the passenger vehicle(s) versus motorcycle(s) crashes).
Im Jahre 1990 haben die in den alten Bundesländern der Bundesrepublik Deutschland zugelassenen 34 Millionen Kraftfahrzeuge insgesamt rund 517 Milliarden Kilometer im In- und Ausland zurückgelegt. 89 Prozent dieser Jahresfahrleistung entfällt dabei auf Personenwagen. Güterkraftfahrzeuge haben eine Fahrleistung von 41 Milliarden Kilometer erbracht. Die mittlere Jahresleistung der Fahrzeuge beläuft sich auf 15.200 Kilometer. Die höchste Durchschnittsfahrleistung findet man mit 59.000 Kilometer pro Jahr bei den Zugmaschinen. Im Beitrag wird ferner die Jahresfahrleistung nach Fahrzeugarten aufgegliedert. Der Beitrag zeigt auch auf, dass bei Pkw die mittlere Jahresfahrleistung mit dem Fahrzeugalter abnimmt, mit der Fahrzeuggröße (Hubraum) zunimmt und bei Fahrzeugen mit Ottomotor niedriger ist als bei Dieselfahrzeugen.
This study analyses no.39 cases in which n.41 motorcyclists were fatally injured, or 36% of total motorcycle fatalities in Northern Ireland between 2004 and 2010 (n.114). There were n.17 cases (43.6%) where the actions of another vehicle driver caused the collision, in thirteen of these cases the motorcycles had their lights switched on. The remaining n.22 collisions (56.4%) were due to the actions of the motorcyclist. In the approach to the collision scene, there were n.13 cases (31.7%) in which the approach was a right hand bend and in n.8 (19.5%) cases, the approach was a left hand bend. In the remaining n.18 (43.9%) cases, the approach was a straight road. Of the n.17 (41.4%) motorcycles that slid after falling, n.10 (24.4%) fell onto their right side and the remaining n.7 (17.1%) fell onto their left side. The information from this study identifies primary and contributory causes of motorcycle collisions.
In-depth road traffic accident research in Spain is a fairly recent activity. In the past, only accident data that had been retrospectively processed by the national and regional traffic police forces was available. In 1999 Applus+IDIADA set up a permanent accident research unit to carry out indepth analysis of road accidents in Spain. Since then accidents involving cars, motorcycles, coaches and vulnerable road users have been thoroughly studied. The Applus+IDIADA accident research team has carried out work for the various traffic polices in Spain and it is currently involved in several research projects in which accidentology is one of the main tasks. The working methodology of the team is presented in the first part of the paper. In the framework of the European research project "Rollover" (GRD2-2001-50086), Applus+IDIADA has collected data, inspected scenarios and performed virtual reconstructions of twenty-six of the total seventy-six rollover accidents studied. The second half of the paper describes how these accident investigations were used to develop a test procedure for identifying possible improvements to the vehicle structure which augment occupant protection in a rollover scenario. In particular, a proposal for a new drop test for rollover assessment is presented. The cases were analysed for severity, in terms of injury to the occupants and damage to the vehicle, and taking into account whether a seatbelt was worn or not. The worst possible cases were identified as those that had severe occupant injuries and sizable damage to the occupant compartment when seatbelts had been worn. The most severe cases were then analysed further for impact position (roll and pitch angles) and the impact velocity. With these parameters taken into account, the most representative combinations could be found. This resulted in a series of configurations for possible drop tests. The results of the tests indicate where passenger vehicle structures need to be improved in order to increase occupant safety in the event of a rollover crash.
Injuries in motorbike accidents in correlation with protective clothes and mechanism of the accident
(2013)
This study deals with a possible connection between safety clothing / accident mechanism and injury severity in a state-wide traffic accident investigation with focus on light and small motorbike-involvement for accidents in the area of the Saarland in which the persons riding the bike have been injured or killed. An interdisciplinary team of medical scientists and engineers collected the medical and technical data as well as all the relevant traces of the accident on scene and in time. During twenty months of data collection a total of 401 cases could be gathered. Grave injuries were more common for the group of heavier motorcycles (>125 ccm). Motorcyclists had been polytraumatized only in the group where the accident was connected with a collision. Significant correlation between protective clothes and injury severity could only be found for protective gloves and protective trousers. The knowledge about mechanism of the accident, protective clothes and severity of injuries can be helpful for the improvement of road and motorcyclists' safety.
The number of road accidents in Portugal has decreased significantly in the last decades, however, this tendency is not similar in all types of transportation. In the most recent years and by European standards, Portugal is still one of the leading countries concerning the number of fatalities in Powered Two Wheelers (PTW) accidents. To this effect, the in-depth investigation of PTW accidents is crucial and so, a thorough statistical analysis concerning the main factors influencing PTW riders injury severity accidents was undertaken regarding the 2007-2010 period in the National Road Safety Authority (ANSR) injured riders database using the software SPSS. In addition, to determine the importance of absent factors in the database analysis, such as velocity, a set of 53 real accidents involving PTW were also investigated and computationally reconstructed using the software PC-Crash. Lateral collisions between a motorcycle, its rider and the side of three different passenger cars were also simulated, varying the motorcycle impact angle and velocity in order to estimate the PTW deformation energy and the rider- injuries, as this accident configuration stands out in terms of frequency and even severity. The results of this detailed study are presented.
The purpose of this work is to investigate the association between the injuries in motorcycle accident and the main accident configurations. The data were provided by a multicentric case-control study MAIDS regarding the risk of crash and injuries of motorcyclists. Chi-square test was used to evaluate the relationship between the variables and a logistic regression was performed to evaluate the association of injury severity with some variables supposed to be predictive factors. Lesive patterns characterized by internal haemorrhages are mainly associated with fronto-lateral crashes, above all in urban areas. Lacerations or abrasions, mainly reported in torso and lower extremities, are mostly associated with single crashes or accidents in queue also for crashes occurred to low speed (< 50 km/h). The severity of injuries is highly associated with impact speed, regardless of the crash configuration. Fractures and haemorrhages play an important role in determining the severity of injuries. The upper extremities are the most frequently traumatised anatomic areas.
Mit den Schwerpunkten Fahrstabilität, Kurshaltung und Kraftschlussausnutzung wurden die theoretischen und fahrdynamischen Grundlagen für die fahrsichere Motorrad-Kurvenbremsung mit einem kurventauglichen Bremssystem untersucht. In theoretischen Betrachtungen wurden ein Bremskraftregelungs- und das zugehörige Sensorkonzept sowie Maßnahmen zur Schräglaufbegrenzung (Fahrstabilität/Kraftschlussausnutzung) und zur Ausschaltung des Bremslenkmoments (Kurshaltung) erarbeitet. Die elektronische Bremskraftregelung baut auf einer dynamisch lastabhängigen Kombibremse mit voreilend überbremstem Hinterrad auf. Die Sensorik umfasst Raddrehzahlen (bzw. -änderungen), dynamische Radlasten, Radseitenkräfte und Fahrzeugrollwinkel. Das Sensorkonzept ermöglicht indirekte Messung des aktuellen Umfangs- und Seitenkraftschlussbedarfs und bietet einen Ansatz für eine kraftschlussorientierte Bremskraftregelung. Die Radkraftmessung erkennt den Beginn einer querdynamischen Destabilisierung frühzeitig und eindeutig; dies konnte im fahrdynamischen Experiment ebenso bestätigt werden wie die Praxistauglichkeit der von der Forschungsstelle neu entwickelten und gebauten Sensorik. Die kraftschlussorientierte Radregelung ist notwendigerweise angewiesen auf die Kenntnis des Reifenkraftübertragungsverhaltens. Dieses wurde mit einem Motorradreifenmessanhänger der Forschungsstelle auf realen Fahrbahnen exemplarisch untersucht. Mit seiner Hilfe kann für jeden Betriebspunkt der Kurvenbremsung der aktuelle Schräglauf an beiden Rädern bestimmt werden. Alle erfassten Daten können für weitere zukünftige Sicherheitssysteme genutzt werden. Es ist vorgesehen, das entworfene Bremskraftregelungskonzept einschließlich der Maßnahmen zur Schräglauf- und Bremslenkmomentbegrenzung zu realisieren und die hiermit zu erzielenden Verbesserungen im fahrdynamischen Experiment nachzuweisen. Die Messungen zum Reifenverhalten sollen fortgesetzt und auf den dynamischen Bereich ausgedehnt werden.
Motorcycle safety research
(2007)
Honda- global motorcycle sales exceeded the 10 million units mark since 2004, and further expansion is expected. As a responsibility for a company to provide mobility, Honda is focusing on motorcycle safety as top priority and has been working on various activities for both aspects of hardware and software. Here, we present Honda- activity for the safety technology of motorcycles. At present, Honda is promoting motorcycle safety in the four themes of prevention and collision safety such as safety education, recognition assistance, accident prevention and injury reduction. First, in the area of the safety education, the "Honda Safety Driving Promotion Center" was established in 1970, and motorcycle riders and vehicle driver trainings have been organized, and the traffic training centers are used as an actual practice field not only in Japan but also in many other regions in the world. Through our training activities, the new area of safety training with hardware assistance was developed and Honda- unique technology was accumulated such as the riding simulator which can provide experience of potentially dangerous situations without risk. Especially, the "riding trainer", the popular version of the riding simulator, was introduced at several motor shows in various countries and launched in September 2005. It was distributed first in Europe and is expected to expand globally aiming at 3000 units worldwide.. And in Europe, the newest version, which includes the suburban roads program, jointly developed with ADAC, will be released in near future. In the area of recognition assistance, "vehicle to vehicle communication technology" is under development using the advantage of being a manufacturer of both motorcycles and cars. This technology is under research as Honda "ASV-3" in Japan, and as part of C2C activity in Europe. As for the accident prevention, advanced brake systems for motorcycles to assist more effective brake operation have been expanded, Honda signed the European Road Safety Charter in April 2004 with the advanced brake systems commitment and furthermore, they are expanding according to vehicle characteristics and region. Then all models above 250 cc will have a version of the system by 2010. And as the last theme, "motorcycle airbag system" is introduced which is equipped on a mass production motorcycle for the first time in the world. It has been researched and developed for a long time as an injury reduction technology for collision accidents. Honda automobile technology was used for the research and development of the motorcycle airbag, and many specific issues such as the analysis of the collision conditions particular to motorcycles have been solved to realize today- success. It might be known that ADAC in-house crash test held in August this year confirmed the high effectiveness of the airbag system and showed a positive result. This motorcycle airbag system is equipped to the Honda Gold Wing and launched in North America in August, 2006. Also in Europe, it will be sold by the end of this year. Each theme of Honda motorcycle safety technology can be seen at the Honda booth.
16% aller Verkehrstoten in Deutschland sind Motorradfahrer und die Anzahl stagniert auf diesem hohen Niveau. Daher ist eine Verbesserung der Fahrsicherheit von Motorrädern zwingend erforderlich. Im Pkw leisten aktive bzw. verstellbare Fahrwerksysteme einen positiven Beitrag zur Fahrsicherheit und helfen, Unfälle zu vermeiden. Hierzu zählen neben den Fahrdynamikregelsystemen wie ABS und ESP auch Verstelldämpfer und Stabilisatorverstellsysteme. Dämpfer- und Stabilisatorsysteme beeinflussen die dynamische Radlast und können insbesondere im ABS-Regelbereich die Fahrsicherheit erhöhen. Der Einfluss geregelter Dämpfersysteme auf die Fahrsicherheit und den Komfort im Pkw-Bereich ist in ausführlichen Untersuchungen sowohl theoretisch als auch praktisch belegt. Im Kraftradbereich existieren zwar Untersuchungen zu verstellbaren Dämpfersystemen, meist werden hier aber ausschliesslich komfortorientierte Kriterien betrachtet. Neben der Übertragbarkeit der positiven Effekte, die im Pkw-Bereich hinsichtlich Komfort und Fahrsicherheit durch geregelte Dämpfersysteme erreicht werden, auf Krafträder, ist der Einfluss geregelter Systeme auf die besonderen kraftradspezifischen Eigenschaften noch nicht ausführlich simulativ betrachtet worden. Das labile System Kraftrad, das in Abhängigkeit der Fahrgeschwindigkeit stark veränderliche Eigenschaften bezüglich der Eigenstabilisierung aufweist, neigt je nach Geschwindigkeitsbereich zu unterschiedlichem Verhalten. Die Zielsetzung dieser Arbeit liegt somit in der Überpruefung der Übertragbarkeit der aus dem Pkw-Bereich bekannten Einflüsse geregelter Dämpfersysteme auf Fahrkomfort und Fahrsicherheit im Kraftradbereich. Weiter soll hierbei auf kraftradspezifische Fahrsituationen eingegangen werden, die in der Pkw-Forschung auf Grund des abweichenden Systemverhaltens keine Berücksichtigung finden. Die Untersuchung gliedert sich in die Parameterermittlung anhand eines Versuchsmotorrades, die Erstellung und Validierung eines Mehrkörpersimulationsmodells unter Verwendung der Software VI Motorcycle fuer Adams/Car, die Definition, Auswahl und Umsetzung geeigneter Fahrmanöver sowie die Beurteilung des Sicherheitsgewinns. In der Simulationsumgebung VI Motorcycle (Adams/Car) wurden Schnittstellen geschaffen, um (semi-)aktive Fahrwerke einzubinden. Die entsprechenden Regelalgorithmen sowie die Umsetzung der Dämpferkonzepte wurden hierfür in Matlab/Simulink aufgebaut. Im Rahmen dieser Untersuchung wurden zahlreiche Regelalgorithmen und Dämpferkonzepte modelliert und getestet. Es wurde ein Fahrmanöverkatalog mit solchen Fahrversuchen erstellt, die Potenzial fuer einen Sicherheitsgewinn durch aktive Dämpfer erwarten lassen. Fuer die definierten Fahrmanöver wurden Simulationen aller entwickelten Regler und als Referenz auch eines passiven Dämpfersystems durchgeführt. Die Simulationsdaten wurden anhand vorab definierter Beurteilungskriterien ausgewertet. Die Ergebnisse lassen Potenzial zur Steigerung von Fahrsicherheit und Komfort vermuten. Die Erkenntnisse aus dem Pkw-Bereich koennen in weiten Teilen auf den Kraftradbereich übertragen werden. Ein signifikanter Einfluss auf das heutige Unfallgeschehen von Motorrädern ist jedoch als unwahrscheinlich einzuschätzen.