Sonstige
Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (53) (entfernen)
Sprache
- Englisch (53) (entfernen)
Volltext vorhanden
- nein (53) (entfernen)
Schlagworte
- Bewertung (16)
- Conference (16)
- Evaluation (assessment) (16)
- Konferenz (16)
- Impact test (veh) (14)
- Prüfverfahren (14)
- Test method (14)
- Anfahrversuch (13)
- Anthropometric dummy (12)
- Dummy (12)
- Injury (12)
- Verletzung (12)
- Fußgänger (11)
- Pedestrian (11)
- Safety (11)
- Sicherheit (11)
- Accident (10)
- Unfall (10)
- Simulation (9)
- Analyse (math) (8)
- Analysis (math) (8)
- Collision (8)
- Europa (8)
- Europe (8)
- Biomechanics (7)
- Biomechanik (7)
- Frontalzusammenstoß (7)
- Head on collision (7)
- Radfahrer (7)
- Zusammenstoß (7)
- Cyclist (6)
- Schweregrad (Unfall, Verletzung) (6)
- Severity (accid, injury) (6)
- Car (5)
- Child (5)
- Datenbank (5)
- Deutschland (5)
- Driver assistance system (5)
- Fahrerassistenzsystem (5)
- Germany (5)
- Head (5)
- Kind (5)
- Knee (human) (5)
- Kopf (5)
- Passive safety system (5)
- Passives Sicherheitssystem (5)
- Schweregrad (Unfall (5)
- Verletzung) (5)
- injury) (5)
- Alte Leute (4)
- Brustkorb (4)
- Driver (4)
- Fahrer (4)
- Fahrzeug (4)
- Knie (menschl) (4)
- Leg (human) (4)
- Reproducibility (4)
- Reproduzierbarkeit (4)
- Seitlicher Zusammenstoß (4)
- Severity (accid (4)
- Side impact (4)
- Standardisierung (4)
- Standardization (4)
- Thorax (4)
- Accident prevention (3)
- Bein (menschl) (3)
- Bemessung (3)
- Benutzung (3)
- Design (overall design) (3)
- Fahrzeuginnenraum (3)
- Improvement (3)
- Insasse (3)
- Interior (veh) (3)
- Measurement (3)
- Messung (3)
- Old people (3)
- Pkw (3)
- Risikobewertung (3)
- Risk assessment (3)
- Statistics (3)
- Statistik (3)
- Transport infrastructure (3)
- Tunnel (3)
- Unfallverhütung (3)
- Use (3)
- Vehicle (3)
- Vehicle occupant (3)
- Verbesserung (3)
- Abdomen (2)
- Active safety system (2)
- Airbag (2)
- Aktives Sicherheitssystem (2)
- Automatic (2)
- Automatisch (2)
- Autonomes Fahren (2)
- Autonomes Fahrzeug (2)
- Autonomous driving (2)
- Autonomous vehicle (2)
- Belastung (2)
- Braking (2)
- Bremsung (2)
- Classification (2)
- Compatibility (2)
- Cost benefit analysis (2)
- Data acquisition (2)
- Data bank (2)
- Database (2)
- Datenerfassung (2)
- Dauerhaftigkeit (2)
- Deformable barrier (impact test) (2)
- Deformation (2)
- Deformierbare Barriere (Anpralltest) (2)
- Detection (2)
- Detektion (2)
- Driver information (2)
- Durability (2)
- Electric vehicle (2)
- Elektrofahrzeug (2)
- Error (2)
- Fahrerinformation (2)
- Fahrstabilität (2)
- Fahrzeugsitz (2)
- Fatality (2)
- Fehler (2)
- Front (2)
- Gefahrenabwehr (2)
- Gesetzgebung (2)
- Hospital (2)
- Human body (2)
- Intelligent transport system (2)
- International (2)
- Klassifizierung (2)
- Kompatibilität (2)
- Krankenhaus (2)
- Legislation (2)
- Load (2)
- Mathematical model (2)
- Menschlicher Körper (2)
- Method (2)
- Modification (2)
- Motorcyclist (2)
- Motorradfahrer (2)
- Norm (tech) (2)
- On the spot accident investigation (2)
- Rechenmodell (2)
- Research project (2)
- Road network (2)
- Safety belt (2)
- Seat (veh) (2)
- Security (2)
- Sicherheitsgurt (2)
- Specification (standard) (2)
- Straßennetz (2)
- Tödlicher Unfall (2)
- Unterleib (2)
- Untersuchung am Unfallort (2)
- Vehicle handling (2)
- Verkehrsinfrastruktur (2)
- Veränderung (2)
- Wirtschaftlichkeitsrechnung (2)
- (menschl) (1)
- Accident rate (1)
- Active safety (1)
- Adult (1)
- Aged people (1)
- Air bag (restraint system) (1)
- Air quality management (1)
- Aktive Sicherheit (1)
- Angle (1)
- Anti locking device (1)
- Antiblockiereinrichtung (1)
- Attitude (psychol) (1)
- Aufprallschlitten (1)
- Ausrüstung (1)
- Autobahn (1)
- Bau (1)
- Bearing capacity (1)
- Behaviour (1)
- Bein (1)
- Bicyclist (1)
- Boden (1)
- Brand (1)
- Bridge (1)
- Bridge management system (1)
- Brücke (1)
- Brücken Management System (1)
- Camera (1)
- Carriageway (1)
- Cause (1)
- Cervical vertebrae (1)
- Chassis (1)
- Clay (1)
- Climate change (1)
- Communication (1)
- Condition survey (1)
- Construction (1)
- Crash Test (1)
- Crashtest (1)
- Critical path method (1)
- Damage (1)
- Data base (1)
- Data processing (1)
- Datenverarbeitung (1)
- Decision process (1)
- Decke [Straße] (1)
- Delivery vehicle (1)
- Demand (econ) (1)
- Demografie (1)
- Demography (1)
- Deterioration (1)
- Development (1)
- Digitale Bildverarbeitung (1)
- EU (1)
- Earthworks (1)
- Einstellung (psychol) (1)
- Electronic stability program (1)
- Elektronisches Stabilitätsprogramm (1)
- Empfindlichkeit (1)
- Entscheidungsprozess (1)
- Entwicklung (1)
- Equipment (1)
- Erdarbeiten (1)
- Erwachsener (1)
- Fahrbahn (1)
- Fahrleistung (1)
- Fahrwerk (1)
- Finite element method (1)
- Fire (1)
- Flooding (1)
- Foot (not a measure) (1)
- Forschungsarbeit (1)
- Frau (1)
- Fugenfüllung (1)
- Fuß (1)
- Geomembran (1)
- Geomembrane (1)
- Gewicht (1)
- Griffigkeit (1)
- Halswirbel (1)
- Head (human) (1)
- Height (1)
- Höhe (1)
- Hüfte (menschl) (1)
- Image processing (1)
- Impact sled (1)
- Impact study (1)
- Impact test (1)
- Intelligentes Transportsystem (1)
- Intelligentes Verkehrssystem (1)
- Interface (1)
- Intersection (1)
- Interview (1)
- Kamera (1)
- Kleintransporter (1)
- Klimawandel (1)
- Knie (1)
- Knotenpunkt (1)
- Kommunikation (1)
- Kopf (menschl) (1)
- Kraftfahrzeug (1)
- Landstraße (1)
- Layer (1)
- Learning (1)
- Lebenszyklus (1)
- Lernen (1)
- Luftreinhaltung (1)
- Market (1)
- Markt (1)
- Materialveraenderung (allg) (1)
- Medical examination (1)
- Medizinische Untersuchung (1)
- Methode der finiten Elemente (1)
- Motorcycle (1)
- Motorrad (1)
- Motorway (1)
- Nachfrage (1)
- Netzplantechnik (1)
- Neural network (1)
- Neuronales Netz (1)
- Oberfläche (1)
- Overlapping (1)
- PVC (1)
- Peat (1)
- Pelvis (1)
- Pfahl (1)
- Pile (1)
- Planning (1)
- Planung (1)
- Policy (1)
- Politik (1)
- Polyvinylchloride (1)
- Preloading (soil) (1)
- Probability (1)
- Prototyp (1)
- Prototype (1)
- Prüefverfahren (1)
- Public transport (1)
- Rain (1)
- Reconstruction (accid) (1)
- Regen (1)
- Richtlinien (1)
- Risiko (1)
- Risk (1)
- Road (1)
- Road user (1)
- Robot (1)
- Roboter (1)
- Rural road (1)
- Sachschaden (1)
- Schicht (1)
- Schnittstelle (1)
- Schutz (1)
- Sealing compound (1)
- Seite (1)
- Sensitivity (1)
- Sensor (1)
- Service life (1)
- Settlement (1)
- Setzung (1)
- Severity (acid (1)
- Side (1)
- Skidding resistance (1)
- Social factors (1)
- Soil (1)
- Soziale Faktoren (1)
- Spain (1)
- Spanien (1)
- Specifications (1)
- Spinal column (1)
- Stand der Technik (Bericht) (1)
- State of the art report (1)
- Straße (1)
- Stress (psychol) (1)
- Subsoil (1)
- Surface (1)
- Surfacing (1)
- Technologie (1)
- Technology (1)
- Test (1)
- Test procedure (1)
- Ton (Gestein) (1)
- Torf (1)
- Traffic (1)
- Tragfähigkeit (1)
- Unfallhäufigkeit (1)
- Unfallrekonstruktion (1)
- Untergrund (1)
- Ursache (1)
- Vehicle mile (1)
- Verfahren (1)
- Verfahren ; Verkehrsinfrastruktur (1)
- Verformung (1)
- Verhalten (1)
- Verkehr (1)
- Verkehrsteilnehmer (1)
- Versuch (1)
- Vorbelastung (Boden) (1)
- Vorn (1)
- Vorne (1)
- Wahrscheinlichkeit (1)
- Weight (1)
- Windschutzscheibe (1)
- Windscreen (veh) (1)
- Winkel (1)
- Wirbelsäule (1)
- Wirkungsanalyse (1)
- Woman (1)
- Zusammenstoss (1)
- Zustandsbewertung (1)
- Öffentlicher Verkehr (1)
- Überdeckung (1)
- Überschwemmung (1)
Institut
The PDB, BASt and Opel conducted two test series to evaluate possible effects on the results obtained using the EEVC WG17 Lower Legform Impactor as a test tool for the assessment of pedestrian safety. The reproducibility and repeatability of the test results were assessed using six legform impactors while keeping the test parameters constant. In the second series one impactor was used and the test parameters were varied to assess the effects on the readings of the legform. The test parameters were velocity, temperature, relative humidity, the point of first contact regarding the deviation in z-direction and the deviations of the pitch, roll and yaw angle. The tests were performed using an inverse setup, i.e. the legform was hit by a guided linear impactor equipped with a honeycomb deformation element. This setup was chosen to be able to vary each single parameter while avoiding variations of the other test parameters at the same time. The test parameters were varied stronger than allowed in regulatory use in order to determine possible dependencies between the parameters and the readings which were acceleration, bending angle and shear displacement.
PROSPECT (Proactive Safety for Pedestrians and Cyclists) is a collaborative research project involving most of the relevant partners from the automotive industry (including important active safety vehicle manufacturers and tier-1 suppliers) as well as academia and independent test labs, funded by the European Commission in the Horizon 2020 research program. PROSPECT's primary goal is the development of novel active safety functions, to be finally demonstrated to the public in three prototype vehicles. A sound benefit assessment of the prototype vehicle's functionality requires a broad testing methodology which goes beyond what has currently been used. Since PROSPECT functions are developed to prevent accidents in intersections, a key aspect of the test methodology is the reproduction of natural driving styles on the test track with driving robots. For this task, data from a real driving study with subjects in a suburb of Munich, Germany was used. Further data from Barcelona will be available soon. The data suggests that intersection crossing can be broken down into five phases, two phases with straight deceleration / acceleration, one phase with constant radius and speed turning, and two phases where the bend is imitated or ended. In these latter phases, drivers mostly combine lateral and longitudinal accelerations and drive what is called a clothoid, a curve with curvature proportional to distance travelled, in order to change lateral acceleration smoothly rather than abrupt. The data suggests that the main parameter of the clothoid, the ratio distance travelled to curvature, is mostly constant during the intersections. This parameter together with decelerations and speeds allows the generation of synthetic robot program files for a reproduction of natural driving styles using robots, allowing a much greater reproducibility than what is possible with human test drivers. First tests show that in principle it is possible to use the driving robots for vehicle control in that manner; a challenge currently is the control performance of the robot system in terms of speed control, but it is anticipated that this problem will be solved soon. Further elements of the PROSPECT test methodology are a standard intersection marking to be implemented on the test track which allows the efficient testing of all PROSPECT test cases, standard mobile and light obstruction elements for quick reproduction of obstructions of view, and a concept for tests in realistic surroundings. First tests using the PROSPECT test methodology will be conducted over the summer 2017, and final tests of the prototype vehicles developed within PROSPECT will be conducted in early 2018
Since its beginning in 1999, the German In-Depth Accident Study (GIDAS) evolved into the presumably leading representative road traffic accident investigation in Europe, based on the work started in Hanover in 1973. The detailed and comprehensive description of traffic accidents forms an essential basis for vehicle safety research. Due to the ongoing extension of demands of researchers, there is a continuous progress in the techniques and systematic of accident investigation within GIDAS. This paper presents some of the most important developments over the last years. Primary vehicle safety systems are expected to have a significant and increasing influence on reducing accidents. GIDAS therefore began to include and collect active safety parameters as new variables from the year 2005 onwards. This will facilitate to assess the impact of present and future active safety measures. A new system to analyse causation factors of traffic accidents, called ACASS, was implemented in GIDAS in the year 2008. The whole process of data handling was optimised. Since 2005 the on-scene data acquisition is completely conducted with mobile tablet PCs. Comprehensive plausibility checks assure a high data quality. Multi-language codebooks are automatically generated from the database structure itself and interfaces ensure the connection to various database management systems. Members of the consortium can download database and codebook, and synchronize half a terabyte of photographic documentation through a secured online access. With the introduction of the AIS 2005 in the year 2006, some medical categorizations have been revised. To ensure the correct assignment of AIS codes to specific injuries an application based on a diagnostic dictionary was developed. Furthermore a coding tool for the AO classification was introduced. All these enhancements enable GIDAS to be up to date for future research questions.
The Netherlands is on the way to change its existing skid resistance measuring method for its highway network from the Dutch RAW 72, a longitudinal force method, to the Sideway Force method. This method is described in the Technical Specification 15901-8 (SKM device) as well as 15901-6 (SCRIM device) and is in use in 9 European countries. The CEN TC 227 WG5 on Surface Characteristics is currently working on combining of these two technical Specifications into a European standard for Sideway-Force (SWF) measurement devices. The idea of this change in the Netherlands was perceived in 2013 and since then a lot of meetings have been held with the different Dutch decision makers as well as with countries which currently operate SWF devices. There was an intensive exchange of knowledge about these devices and their corresponding quality assurance systems, because the Netherlands wanted to incorporate and rely on an existing system of a neighbor country without losing their present level of quality. The Netherlands has therefore decided to incorporate the German SKM approach. The network monitoring with the new system will start in 2017. To ensure the quality of skid resistance measurements and further cooperation in this field, it has been decided to initiate an alliance between BASt and the Dutch road owner Rijkswaterstaat (RWS). This alliance will facilitate an exchange of research activities, calibration of the Dutch systems according to the existing German Standard as well as control measurements with a BASt-device on the Dutch network during the network monitoring. During 2016 also comparative measurements will be performed on a network level with the current Dutch device and with an SKM device to determine a conversion between the two and to be able to define new threshold values.
An approach to the standardization of accident and injury registration systems (STAIRS) in Europe
(1998)
STAIRS is a European Commission funded study whose aim is to produce a set of guidelines for a harmonised, crash injury database. The need to evaluate the effectiveness of the forthcoming European Union front and side impact directives has emphasised the need for real world crash injury data-sets that can be representative of the crash population throughout Europe. STAIRS will provide a methodology to achieve this. The ultimate aim of STAIRS is to produce a set of data collection tools which will aid decision making on vehicle crashworthiness as well as providing a means to evaluate the effectiveness of safety regulations. This paper will disseminate the up-to-date findings of the group as they try to harmonise their methods. The stage has been reached where studies into the diverse methods of the UK, French and German systems of crash injury investigation have been undertaken. An assessment has already been made of the relationships between the three current systems in order to define the areas of agreement and divergence. The conclusions reached stated that there were many areas that are already closely related and that the differences were only at the detailed level. With the emphasis on secondary safety and injury causation, core data sets were decided upon, taking into account: vehicle description, collision configuration, structural response of vehicles, restraint and airbag performance, child restraint performance, Euro NCAP, pedestrian and vehicle occupant kinematics, injury description and causation. Each variable was studied objectively, the important elements isolated and developed into a form that all partners were agreeable on. A glossary of terms is being developed as the project progresses which includes ISO standards and other definitions from the associated CAREPLUS project, which addresses the comparability of national data sets. A major consideration of the group was the data collection method to be employed. The strengths and weaknesses of each study were investigated to obtain a clear idea of which aspects offered the best way forward. The quality of this information and transference into a common format, as well as the necessary error checking systems to be employed have just been completed and are described. In tandem with this area of study the problem of the statistical relationship of each sample to the national population is also being investigated. The study proposes a mechanism to use a sample of crash injury data to represent the national and international crash injury problem
New vehicle types are extensively tested to check almost all factors that influence ride and handling. With reference to the Association of German Car Tuners" (VDAT e.V.) valuations, approximately 10% of all cars in Germany are being modified by their owners. 28 % of those modifications" sales are divergent wheel-tire combinations, 13 % are tuning measures on the chassis suspension or wheel spacers. In almost all cases the singular modifications present a general permission for specific vehicles they have been tested in. Combined tuning measures, however, are often checked by just one inspector, following a procedure of mostly subjective assessment criteria. Today, critical attributes are only being observed, in case a vehicle is involved in an accident and the modifications are identified as crash causal factors or as a cofactor on the development of a crash. For the first time, a field study allows a survey of safety affecting chassis modifications. The test layout has to comply with some basic conditions. Different vehicle concepts with a wide margin of modifications are required to get a high transferability of the results. A total amount of more than 150 tested vehicles serves the same purpose. The tests are limited concerning the installation time of measurement techniques and the requirement that no damage, defilement or immoderate wear of the vehicles are accepted by their owners. Due to such factors as well as the driver Ìs acceptance, the vehicles are controlled by its owners instead of robots or test drivers. For keeping down the driver- influence, the lane has narrow boundaries and the driver has to drive in strictly adherence to the given instructions. After gathering all modifications, as well as static and kinematic parameters like the toe and camber angle, dynamic testing of predominantly lateral dynamics is conducted. Besides standardized tests like the ISO 3888-2 (Obstacle Avoidance) or the ISO 14512 (Braking on Surfaces with Split Coefficient of Friction), to test the influence of modified kingpin offsets caused by wheel spacers, some deviant tests are conducted. Those are required due to the demand of objective test results for road tests with vertical induced stimulation of the chassis suspension. Hence, new tests on corner braking with and without vertical stimulation have been developed. The interpretation of data includes thresholds, e.g. the maximum entrance velocity without hitting cones, on the one hand, and the analysis of characteristics of data concerning time and frequency range, "1-second values" and peak response times on the other hand. Besides the thresholds as indicators for the achievable velocities, which are mainly affected by friction coefficients, the vehicle reaction in the course of time characterizes the vehicle reaction in the threshold range and consequently the operational demands on the driver. The field study has started and promises the first long-range analysis of chassis modifications. The results offer a basis for hypothesis and resultant further test layouts for oncoming studies of the identified critical tuning measures.
When the EEVC proposed the full-scale side impact test procedure, it recommended that consideration should be given to an interior headform test in addition. This was to evaluate areas of contact not assessed by the dummy. EEVC Working Group 13 has been researching the parameters of a possible European headform test procedure in four phases. Earlier stages of the research have been presented at previous ESV conferences. The conclusions from these have suggested that the US free motion headform should be used in any European test procedure and that it should be a free flight test, not guided. This research has now culminated in proposals for a European test procedure. This paper presents the proposed EEVC side impact interior headform test procedure, giving the rationale for the test and the first results from the validation phase of the test protocol.
Proposal for a test procedure of assistance systems regarding preventive pedestrian protection
(2011)
This paper is showing a proposal for a test procedure regarding preventive pedestrian protection based on accident analysis. Over the past years pedestrian protection has become an increasing importance also during the development phase of new vehicles. After a phase of focusing on secondary safety, there are current activities to detect a possible collision by assistance systems. Such systems have the task to inform the driver and/or automatically activate the brakes. How practical is such a system? In which kind of traffic situations will it work? How is it possible to check the effectiveness of such a system? To test the effectiveness, currently there are no generally approved identifiable procedures. It is reasonable that such a test should be based on real accidents. The test procedure should be designed to test all systems, independent of the system- working principle. The vFSS group (advanced Forward-looking Safety Systems) was founded to develop a proposal for a technology independent test procedure, which reflects the real accident situation. This contribution is showing the results of vFSS. The developed test procedure focuses on accidents between passenger cars and pedestrians. The results are based on analysis results of in-depth databases of GIDAS, German insurers and DEKRA and added by analysis of national and international statistics. The in-depth analysis includes many pre-crash situations with several influencing factors. The factors are e. g. speed of the car, speed of the pedestrian, moving direction and a possible obscuration of the pedestrian by an object. The results comprise also the different situations of adults and children. Furthermore, they include details regarding influence of the lighting conditions (daylight or night) especially with respect to the accident consequences. In fact, more accidents happen at daylight, but fatal accidents are more often at night. A clustering of parameter combinations was found which represents typical accident scenarios. There are six typical accident scenarios which were merged in four test scenarios. The test scenarios are varying the starting position of the pedestrian, the pedestrian size (adult or child) and the speed of the pedestrian, whereas the speed of the car will not be varied. To ensure the independency from used sensing technologies it is necessary to use a suitable dummy. For example, if sensors are based on infrared, the dummy should emit the temperature of a human being. The test procedure will identify the collision speed as the key parameter for assessing the effectiveness of the tested system. The collision speed is defined as the reduction between initial test speed of the car and impact speed. The assessment of the speed reduction value regarding the safety benefit, however, will be part of a separate procedure.
In line with the new definition introduced by the European Commission (EC), the number of seriously injured road casualties in Germany for 2014 is assessed in this study. The number of MAIS3+ casualties is estimated by two different methodological approaches. The first approach is based on data from the German Inâ€Depth Accident Study (GIDAS), which is closely related to the German Road Traffic Accident Statistics. The second approach is based on data from the German TraumaRegister DGU-® (TRâ€DGU), which includes many more hospitals but not all MAIS3+ injuries.
Powered Two Wheelers (PTWs) accidents constitute one of the road safety problems in Europe. PTWs fatalities represent 22% at EU level in 2006, having increased during last years, representing an opposite trend compared to other road users" figures. In order to reduce these figures it is necessary to investigate the accident causation mechanisms from different points of view (e.g.: human factor, vehicle characteristics, influence of the environment, type of accident). SAFERIDER project ("Advanced telematics for enhancing the SAFEty and comfort of motorcycle RIDERs", under the European Commission "7th Framework Program") has investigated PTW accident mechanisms through literature review and statistical analyses of National and In-depth accident databases; detecting and describing all the possible PTW's accident configurations where the implementation of ADAS (Advanced Driver Assistance Systems) and IVIS (In-Vehicle Information Systems) could contribute to avoid an accident or mitigate its severity. DIANA, the Spanish in-depth database developed by CIDAUT, has been analyzed for that purpose. DIANA comprises of accident investigation teams, in close cooperation with police forces, medical services, forensic surgeons, garages and scrap yards. An important innovation is the fact that before injured people arrive to hospitals, photographs and explanations about the possible accident injury mechanisms are sent to the respective hospitals (via 3G GPRS technology). By this, additional information to medical staff can be provided in order to predict in advance possible internal injuries and select the best medical treatment. This methodology is presented in this paper. On the other hand, the main results (corresponding to road, rider and PTW characteristics; pre and post-accident manoeuvres; road layout; rider behaviour; impact points; accident causations;...) from the analyses of the PTW accidents used for SAFERIDER are shown. Only accident types relevant to ADAS and IVIS devices have been considered.