91 Fahrzeugkonstruktion
Filtern
Erscheinungsjahr
- 2017 (41)
- 2013 (34)
- 2007 (22)
- 2009 (21)
- 2015 (21)
- 2010 (20)
- 2014 (16)
- 2011 (15)
- 2004 (14)
- 2005 (14)
- 2001 (9)
- 1998 (7)
- 2003 (7)
- 2016 (7)
- 1991 (6)
- 1992 (6)
- 1995 (6)
- 2008 (6)
- 1996 (5)
- 2006 (5)
- 2012 (5)
- 2018 (5)
- 2019 (5)
- 1974 (2)
- 1988 (2)
- 1989 (2)
- 2000 (2)
- 2002 (2)
- 1975 (1)
- 1976 (1)
- 1978 (1)
- 1979 (1)
- 1983 (1)
- 1984 (1)
- 1986 (1)
- 1990 (1)
- 1993 (1)
- 1994 (1)
- 1997 (1)
- 1999 (1)
Dokumenttyp
- Konferenzveröffentlichung (164)
- Buch (Monographie) (111)
- Wissenschaftlicher Artikel (18)
- Arbeitspapier (13)
- Teil eines Buches (Kapitel) (8)
- Bericht (5)
Schlagworte
- Deutschland (138)
- Germany (138)
- Safety (124)
- Sicherheit (123)
- Conference (101)
- Konferenz (98)
- Fahrzeug (89)
- Vehicle (88)
- Research report (77)
- Forschungsbericht (75)
The term test procedure refers to a method that describes how a system has to be tested to identify and assess specific behavior or properties by experiments. This also includes the specification of required tools, equipment, boundary conditions, and evaluation methods. Test procedures are an essential tool to check whether desired product properties are present, which of course also applies to the development of driver assistance systems. In addition to development and release testing that mainly is performed by the vehicle or system manufacturer, there are tests with the purpose of an independent product testing that are conducted by external test organizations. These tests are needed for vehicle type approval (for admission to a specific market), in the context of applying the standard for functional safety (in both cases mainly executed by technical services (being accredited as certification laboratory)) or for customer information purposes (by a test institute for consumer protection). The focus of this chapter is these "external" test methods. After a taxonomy of test procedures, the differences between legislation (type approval) and consumer testing are highlighted. Typical tests and the associated test setup, tools, and assessment criteria are discussed, and an outlook toward testing in the near and mid-future is given.
Diese Studie befasst sich mit CO2-Reduktionspotenzialen von schweren Nutzfahrzeugen. In einer Literaturrecherche wurden zunächst Sattelzüge, Verteiler-Lkw, Busse im Stadtverkehr sowie Reisebusse betrachtet. Ziel war es, technische Möglichkeiten zur Reduzierung von CO2-Emissionen für die ausgewählten Fahrzeugkategorien zu ermitteln und deren Einsparpotentiale über die jeweiligen Einsatzarten aufzuschlüsseln. Dabei zeigten sich weitestgehend ungenutzte Einsparmöglichkeiten, beispielsweise durch Fahrwiderstandsoptimierung bei Sattelzügen, durch Rekuperation von Bremsenergie bei Stadtbussen und Verteiler-Lkw, oder auch durch bedarfsgerechte Ansteuerung von Nebenverbrauchern bei Stadt- und Reisebussen. Nähere Betrachtung fanden Maßnahmen zur CO2- Reduktion bei Sattelzügen. So wurde an einem Euro-V-EEV-Sattelzugprototyp in Fahrwiderstandsmessungen die Verbesserung des Luftwiderstands durch aerodynamische Anbauteile für Auflieger quantifiziert. Deren Verbrauchseinsparpotenziale wurden anschließend in validierten Verbrauchssimulationen, welche einen etablierten Verbrauchstest (VerkehrsRundschau-Test) virtuell abbilden, quantifiziert. Ferner zeigte eine Kosten-Nutzen-Rechnung die Effektivität der untersuchten Maßnahmen auf. Der Prototyp wurde anschließend dem realen VerkehrsRundschau-Test einmal in Ausgangskonfiguration und einmal mit einem zuvor bereits im Rahmen der Fahrwiderstandsmessungen untersuchten aerodynamischen Maßnahmenpaket, bestehend aus Seitenverkleidung und Heckeinzugsklappen, unterzogen. Hierbei zeigte sich eine mögliche CO2-Reduktion von 4,8 %. Die gemessene Einsparung lag damit oberhalb der zuvor im Rahmen der Verbrauchssimulation prognostizierten.
Unfälle im Straßenverkehr sind in aller Regel Konsequenzen normalen Fahrverhaltens, das an eine bestimmte Situation nicht angepasst war und daher zum Unfall beigetragen hat. Zur Klassifikation dieses mutmaßlich fehlerbehafteten Verhaltens wurde im hier berichteten Projekt eine Taxonomie entwickelt. Sie dient der Klassifizierung von Fahrerfehlverhalten und integriert Aspekte des menschlichen Informationsverarbeitungsprozesses sowie die drei Fehlertypen von RASMUSSEN (1983). Als Bestimmungsstücke beinhaltet die Taxonomie Fehlertypen (regel-/wissens-/fertigkeitsbasiert) und Entscheidungsknoten mit Fragen, deren Beantwortung den Analysten zum jeweiligen Fehler führt. Zusammengefasst bietet die erarbeitete Taxonomie eine breite Anwendbarkeit für die Klassifikation von Fahrfehlern und fehlerfreiem Verhalten bei Manövern, kritischen Situationen bis hin zu Beinaheunfällen oder Unfällen, z. B. zur Harmonisierung der (Video-)Auswertung von FOT- und NDS-Datensätzen oder für In-Depth-Unfallerhebungen. Die Taxonomie wird komplementiert durch eine Übersicht über Fehlervorläuferbedingungen, die im Sinne von Genotypen (HOLLNAGEL 1998) in ihrer jeweiligen Ausprägung auslösende und begünstigende Bedingungen für Fehler, Beinaheunfälle und Unfälle darstellen. Die Übersicht ist als erweiterbares strukturierendes Dokument zu sehen, welches je nach wissenschaftlichen Erkenntnissen verändert werden kann. Gemeinsam mit der Taxonomie bildet sie die Basis für die Ableitung von Fahrerassistenzbedarf und andere Maßnahmen, zur Generierung von Hypothesen und zur strukturierten Sammlung von Studienergebnissen. Der vorliegende Bericht adressiert die FOT- und NDS-Community sowie allgemein verkehrspsychologisch-wissenschaftlich Interessierte. In acht Kapiteln widmet er sich den Arbeitsschritten und Ergebnissen der Taxonomieentwicklung.
In spite of today's highly sophisticated crash test procedures like the different NCAP programs running world-wide, bad real world crash performance of cars is still an issue. There are crash situations which are not sufficiently represented by actual test configurations. This is especially true for car to car, as well as for car to object impacts. The paper describes reasons for this bad performance. The reasons are in principal bad structural interaction between the car and its impact partners (geometric incompatibility), unadjusted front end stiffness (stiffness incompatibility) and collapse of passenger compartments. To show the efficiency of improving cars' structural behaviour in accidents with different impact partners an accident data analysis has been taken out by members of European Project VC-COMPAT. Accident data analysis has shown that in Germany between 15,000 and 20,000 of the now severely injured car occupants might get less injured and between 600 and 900 car occupant fatalities might be saved. Similar results arise for the UK.
Although the bus belongs to the safest traffic means, single accidents can be particularly severe and concern many passengers. Especially in case of fires a high number of injured and killed persons can be the outcome. Fire safety of buses therefore is of high importance. With the increase of plastic materials as a material for the interior equipment of buses and coaches due to their good mechanical properties combined with low weight, the question arises whether the safety level has decreased in case of a fire during the last years " also compared to other means of transport. Because of the combustible plastics and their ability to release a high amount of heat the main fire load in buses is no longer the fuel but the plastic materials which are also often easy to ignite. Besides the flammability of the equipments, also the production of smoke, the smoke development and propagation as well as its toxicity are of interest. That counts for the passengers as well as for the test methods and its limit values. The severe fire in Germany near Hanover in 2008 with 20 fatalities showed how disastrous such fires can be. For those reasons several research projects were initiated on behalf of the German Federal Highway Research Institute. At the one hand the fire behaviour of coach interiors was examined in general focusing on fire propagation as well as fire detection and signalling. As result, recommendations with regard to early fire detection systems for the engine compartments and onboard extinguishing equipment were elaborated. On the other hand research was carried out to examine heat release, smoke, smoke propagation and its toxicity due to burning bus interior materials. In this project small and real scale experiments on material specimens, interior parts and vehicles were performed. Trains and buses often have very similar operation conditions. Consequently, bus interior material was tested according to the regulations for rail vehicles, i.e. DIN EN 45545 as well as DIN 5510. None of the tested bus interior materials would have been allowed to use in a train. The fire safety regulations for bus materials are on a low level compared to other transport sectors, i.e. railway, ship and aircraft. Also numerical investigations with the Fire Dynamics Simulator (FDS) were performed. The very rapid fire development during the severe bus fire from 2008 could be predicted with the numerical model. The model was then used to investigate the influence of different materials, ventilation conditions and ignition sources. The bus materials contribute significantly to a very rapid fire development in bus fires. Especially, the flammable ceiling and the passenger seats were identified to be key issues of the fire propagation in a bus and can be explained by the rapid fire spread along the ceiling and the high fire load of passenger seats. As conclusion of the project effective and economically reasonable fire safety requirements for interiors of buses are recommended which would improve the current situation. Proposals for amendments of current requirements are recommended including the specification of appropriate limit values. In particular, it is taken into consideration which reasonable fire safety standards from other transport sectors, especially the rail sector, should be transferred to buses
The aim of this study was to evaluate the performance and accuracy of Event Data Recorders (EDRs). The analysis was based on J-NCAP crash tests from 2006"2007, with the corresponding EDR datasets. The pre-crash velocity, maximum delta-V and delta-V versus time history data recorded in the EDRs were compared with the reliable crash test data. The difference between the EDR pre-crash velocity and the laboratory test speed was less than 4 percent. In contrast, in several cases the maximum delta-V and delta-V versus time history data obtained from the EDRs showed uncertainty of measurement in comparisons with the reliable delta-V data. The difference in maximum delta-V in these comparisons was more than 5 percent in 10 of 14 tests and more than 10 percent in 4 of 14 tests. The EDRs underestimated the maximum delta-V in almost all tests. It was also concluded that the calculated acceleration from the EDR delta-V versus time history data showed good agreement with the instrumented accelerometer signal during the collision in almost all tests.
Within the automotive context camera monitor systems (CMS) can be used to present views of the traffic situation behind the vehicle to the driver via a monitor mounted inside the cabin. This offers the opportunity to replace classical outside rearview mirrors and therefore to implement new design concepts, aerodynamically optimized vehicle shapes and to reduce the width of the vehicle. Further, the use of a CMS offers the potential to implement functionalities like warnings or situation-adaptive fields of view that are not feasible with conventional rearview mirrors. Despite these potential advantages, it is important to consider the possible technical constraints of this technology and its effect on driver perception and behavior. On the technical side next to the field of view and die robustness of die system, aspects as its functionality at day and night as well as under varying weather conditions should be object to scientific investigation. Concerning human machine interaction, it has to be considered, that the perception of velocities and distances of approaching vehicles might be different for CMS as compared to conventional rearview mirrors and potential influences of factors as the Position of the displays or drivers' age should be taken into account. In order to shed light on these and further open issues, BASt is currently conducting a study that will cover the use of CMS under controlled conditions as well in real traffic. The first part of the study will focus on passenger cars, while in a second step the empirical investigation will be extended to heavy goods vehicles, where the potentials as well as the limitations of CMS might differ considerably. The presentation will cover the first part, with regard to the experimental design, implementation and initial results if already available.
Streuung von Schutzkriterien in kontrollierten Aufprallversuchen gegen die starre 30 Grad-Barriere
(1983)
Gegenstand der Arbeit ist die Ermittlung von Streubreiten von Fahrzeug- und Dummy-Messwerten in Aufprallversuchen bei Geschwindigkeiten von 50 km/h gegen eine starre 30-°-Barriere. Zu den fahrzeugseitigen Messwerten gehörten die Deformation der Frontstruktur, die maximale Fahrzeugverzögerung, die mittlere Fahrzeugverzögerung und Anforderungen der ECE-Regelung 33. Die gemessenen Standardabweichungen der Einzelwerte lagen mit zwei bis sieben Prozent deutlich unter zehn Prozent. Höhere Standardabweichungen der Messwerte wurden dann beobachtet, wenn Aufpralle nach den Mustern Kopf-Lenkrad (Fahrer), Brust-Lenkrad (Fahrer) und Knie-Armaturentafel (Fahrer und Beifahrer) nicht in allen Versuchen zu beobachten sind. Hohe Streubreiten für die Kopfbeschleunigung bzw. die Beschleunigung der Brust des Dummy auf dem Fahrersitz wurden dadurch verursacht, dass in einem Versuch eine unübliche Vorverlagerung des Dummys infolge mangelhafter Gurtwirkung mit nachfolgendem Brust-Lenkrad-Kontakt zu beobachten war.
Der Reifenabrieb ist eine der mengenmäßig größten Quellen für Staubemissionen des Straßenverkehrs. Das betrifft vor allem sedimentierbaren Staub, aber auch Feinstaub, diesen in sehr viel geringeren Mengen. Menge, Qualität und Herkunft der Stoffeinträge in den Straßenseitenraum sollten genauer bestimmt werden, um Ansätze für Minderungsmaßnahmen zu zeigen. Für die entstehende Menge an Reifenabrieb lagen verschiedene Schätzungen vor, über die Schadstoffgehalte gab es bisher nur wenige Informationen, insbesondere zu anderen Metallen als Zink. Es wurden aufgrund von Markenverteilung, Größen, Einsatzbereich und Zustand 65 Pkw-Reifen der Jahre 1980 bis 2003 ausgewählt. Die Gewinnung der Reifenproben erfolgte mit einer Reifenschälmaschine. In Anlehnung an eine Methode zum Aufschluss von Bitumen wurde von der Bundesanstalt für Straßenwesen (BASt) eine stark oxidierende rückstandsfreie Aufschlussmethode entwickelt. Die Elemente Al, As, Cr, Cu, Fe, Mo, Na, Ni, Pb, Sb, V und Zn wurden aus der Aufschlusslösung mittels Optischer ICP-Emissionsspektrometrie (ICP-ÖS) quantitativ bestimmt, Cd mit Graphitrohr-Atomabsorptionsspektrometrie (AAS). Die Massenanteile der Hauptkomponenten der Proben wurden mit einer thermogravimetrischen Analyse (TGA) nach DIN 51006 bestimmt. Die Auswertung ergibt, dass wie vermutet Zink in teilweise sehr hohen Konzentrationen eingesetzt wird, aber auch, dass Cadmium und Blei im Vergleich zum verbreiteten Elementverhältnis Cd/Zn und Pb/Zn in Reifenmaterial mit geringeren Anteilen vorkommen. Dementsprechend sind die hier erstmals ermittelten emittierten Cadmiumfrachten aus Reifenabrieb geringer als zu erwarten war. Kupfer- und Bleiemissionen aus Reifenmaterial wurden nach Literatur- und Herstellerangaben als problematisch eingeschätzt. Dies kann anhand der vorliegenden Messungen und Abschätzung der emittierten Mengen nicht bestätigt werden. Ebenso wurden keine bedenklichen Emissionen der anderen untersuchten Elemente gefunden. Der zeitliche Verlauf der Konzentrationen von Zink und Cadmium in den Reifenlaufflächen bildet mit einer seit den 1980er Jahren leicht sinkenden Tendenz die Bemühungen um geringere Zinkemissionen ab. Im Zeitverlauf sinkende Rußanteile und steigende Glührückstände zeichnen den zunehmenden Einsatz neuer Füllermaterialien wie Silica nach. Auf Basis der Gesamtabriebmenge von 111.420 Tonnen pro Jahr in Deutschland kann die Freisetzung von circa 1.530 Tonnen leichtflüchtiger Substanzen und 22.000 Tonnen flüchtiger Substanzen pro Jahr abgeschätzt werden. Den größten Massenanteil machen die Gummi- und Polymeranteile mit etwa 43.000 Tonnen und Ruß mit etwa 38.000 Tonnen aus. Die emittierte Metallmenge von 1.375 Tonnen pro Jahr besteht hauptsächlich aus Zink. Die hier abgeschätzte Zinkemission von 1.205 Tonnen pro Jahr und Cadmiumemission von 180 kg pro Jahr aus sedimentierbaren Stäuben basiert auf der ermittelten Reifenabriebmasse von 111.420 Tonnen pro Jahr. Diese Masse beinhaltet Lkw- und Pkw-Abrieb, dieser beträgt jedoch nur etwa die Hälfte. Die wenigen Angaben zur Zusammensetzung des Reifenabriebs von Lkw-Reifen lassen um 60 - 80 Prozent höhere Konzentrationen an Blei und Zink erwarten, sodass die Abschätzung an der Untergrenze der tatsächlichen Emissionen liegt. Die Rolle der Ruß- und Gummibestandteile der Abriebe als organischer Bestandteil der Straßenrandböden sollte näher untersucht werden. Es sollte vor dem Hintergrund der EU-Wasserrahmenrichtlinie geklärt werden, ob Bankette und straßennahe Böden sowie die im Straßenbauregelwerk vorgesehenen Entwässerungseinrichtungen auch für bisher wenig untersuchte Stoffe eine ausreichende Reinigungsfunktion haben.
Technical progress in automotive engineering focuses at the moment on two competing branches: improving safety and reducing energy consumption. Recent consideration has been given to a third factor, cost to the consumer. Challenges are presented by demographic changes, especially with increasing participation of elderly people in road traffic. The report considers the recent history of road accidents in Germany and statistics relating to vehicle population and road performance. There is a general trend towards decreasing numbers of accidents and their severity. Transport is responsible for roughly 20% of CO2 emissions and approximately 70% of total petroleum consumption. The Federal Government has responded to these challenges by publishing the Freight Transport and Logistics Masterplan in the summer of 2008. It describes the strategic transport policy direction and the key elements of the future course of action which are to be used to ensure the provision of efficient infrastructure and, at the same time, to reduce the amount of energy consumed by vehicles and make transport more efficient, cleaner and quieter. This document contains a number of concrete measures subsumed under the following six objectives: Making optimum use of transport infrastructure - shaping transport to make it more efficient; Reducing the number of journeys - ensuring mobility; Transferring more traffic to the railways and inland waterways; Upgrading more transport arteries and hubs; Environmentally friendly, climate friendly, quiet and safe transport, and Good working conditions and good training in the freight transport industry. Progress in research is outlined in the following areas: Daytime Running Lights for Motorcycles; Safety of hydrogen vehicles - addressing safety and environmental issues by development of a Global Technical Regulation for hydrogen vehicles; Elements of active vehicle safety for elderly drivers; Periodical Technical Inspection of electronically controlled systems in road vehicles - Electronic Stability Control; Pedestrian protection; Crash Compatibility - role of collision partner in passive safety tests; Child safety; Euro NCAP - Child Restraint Systems, and German Field Operational Test on Car-to-Car and Car-to-Infrastructure Systems (SIM-TD). The research project AKTIV - "Adaptive and Cooperative Technologies for Intelligent Traffic" encompasses the design, development, and evaluation of novel driver assistance systems, knowledge and information technologies and is set up to find solutions for efficient traffic management and Car-to-Car and Car-to-Infrastructure communication for future cooperative vehicle applications. The European Statement of Principles on the Human Machine Interface (HMI), presented at the eSafety Conference, which was held in Berlin on 5/6 June 2007, addresses issues such as Real Time Traffic Information (RTTI), Legal issues of Advanced Driver Assistance Systems (ADAS) and e-security.