80 Unfallforschung
Filtern
Dokumenttyp
Schlagworte
- Leg (human) (6) (entfernen)
Institut
- Sonstige (5)
- Abteilung Fahrzeugtechnik (1)
While cyclists and pedestrians are known to be at significant risk for severe injuries when exposed to road traffic accidents (RTAs) involving trucks, little is known about RTA injury risk for truck drivers. The objective of this study is to analyze the injury severity in truck drivers following RTAs. Between 1999 and 2008 the Hannover Medical School Accident Research Unit prospectively documented 43,000 RTAs involving 582 trucks. Injury severity including the abbreviated injury scale (AIS) and the maximum abbreviated injury scale (MAIS) were analyzed. Technical parameters (e.g. delta-v, direction of impact), the location of accident, and its dependency on the road type were also taken into consideration. The results show that the safety of truck drivers is assured by their vehicles, the consequence being that the risk of becoming injured is likely to be low. However, the legs especially are at high risk for severe injuries during RTAs. This probability increases in the instance of a collision with another truck. Nevertheless, in RTAs involving trucks and regular passenger vehicles, the other party is in higher risk of injury.
Analysis of pedestrian leg contacts and distribution of contact points across the vehicle front
(2015)
Determining the risk to pedestrians that are impacted by areas of the front bumper not currently regulated in type-approval testing requires an understanding of the target population and the injury risk posed by the edges of the bumper. National statistics show that approximately 10% of all accident casualties are pedestrians, with 20% to 30% of these pedestrian casualties being killed or seriously injured. However, the contact position across the front of the bumper is not recorded in national statistics and so in-depth accident databases (OTS, UK and GIDAS, Germany) were used to examine injury risk in greater detail. The results showed that some injury types and severities of injuries appear to peak around the bumper edges. Although there are sometimes inconsistencies in the data, generally there is no evidence to suggest that the edges of the bumper are less likely to be contacted or cause injury.
Motorradfahrer sind im Straßenverkehr besonders gefährdet, nahezu kein Unfall endet ohne Verletzungen der Motorradaufsassen. Wenn ein Unfall unabwendbar ist (das Unfallgeschehen der Motorräder zeigt seit Jahren stetige Besserungen), verbleibt dem Fahrer als Schutz nur seine eigene Bekleidung. Der im Rahmen diese Projekts angestellte Vergleich verschiedener Feldstudien zeigt, dass hauptsächlich die Extremitäten mit Schwerpunkt bei den Beinen verletzt werden. Ähnlich wie hohe Helmtragequoten zum Rückgang der Kopfverletzungen geführt haben, könnte zweckdienliche Schutzkleidung nahezu vollständig Hautabschürfungen und damit verbunden Wundinfektionen vermeiden. Gleichzeitig werden die Schwellwerte für den Eintritt anderer Verletzungen (zum Beispiel Brüche, Bänderrisse, innere Verletzungen) zu höheren Kollisionsgeschwindigkeiten verschoben. Die im Projektverlauf erarbeiteten Anforderungen an Motorradfahrerschutzkleidung sind so spezifisch und vielfältig, dass sie mit keiner anderen, zum Beispiel berufsspezifischen Kleidung vergleichbar sind. Mit Analysen wurde gezeigt, dass einige Anforderungen nur unter Zielkonflikten mit anderen verwirklichbar sind. Die dadurch nötige Mehrfachfunktion mancher Bauteile führt dazu, dass die Prüfung von Eigenschaften kaum mit den Methoden aus üblichen Normenwerken durchgeführt werden kann. Vor diesem Hintergrund begann die Entwicklung speziell angepasster Versuche. In der Regel bilden sie realistisch die Belastungen bei einem Sturz auf die Fahrbahnoberfläche und in der anschließenden Rutschphase nach. Durch die Verlegung der Versuche in das Labor wird die Reproduzierbarkeit erhöht, die Kosten bleiben vergleichsweise gering. Als wichtigste Prüfkriterien wurden Abriebverhalten, Reibwärmeisolation, Reibbeiwert, Stossdämpfung, Widerstand gegen Stich- und Schnittbeschädigung, Formschluss und Bauteilsteifigkeit erarbeitet. Vorgestellt und bewertet wurden verschiedene bereits existierende Prüfverfahren. Wenn sie ungeeignet schienen oder wenn für ein wichtiges Kriterium kein Verfahren zu finden war, wurden eigene neue Vorschläge gemacht. Unter Abwägung von Prüfaufwand und Aussagekraft der Ergebnisse wurde ein Vorschlag für ein normungsfähiges Prüfverfahren erarbeitet. Im Vorschlag berücksichtigt sind nur bereits existierende oder einfach verwirklichbare Prüfverfahren, die für Motorradfahrerschutzkleidung als geeignet angesehen werden.
This study aimed at prediction of long bone fractures and assessment of lower extremity injury mechanisms in real world passenger car to pedestrian collision. For this purpose, two pedestrian accident cases with detail recorded lower limb injuries were reconstructed via combining MBS (Multi-body system) and FE (Finite element) methods. The code of PC Crash was used to determine the boundary conditions before collision, and then MBS models were used to reproduce the pedestrian kinematics and injuries during crash. Furthermore, a validated lower limb FE model was chosen to conduct reconstruction of injuries and prediction of long bone fracture via physical parameters of von Mises stress and bending moment. The injury outcomes from simulations were compared with hospital recorded injury data and the same long bone fracture patterns and positions can be observed. Moreover, the calculated long bone fracture tolerance corresponded to the outcome from cadaver tests. The result shows that FE model is capable to reproduce the dynamic injury process and is an effective tool to predict the risk of long bone fractures.
Beschrieben wird die Evaluierung eines Testverfahrens der Arbeitsgruppe 10 des European Experimental Vehicle Committee, mit dem die "Fußgängerverträglichkeit" von Frontflächen von Personenkraftwagen bestimmt werden kann. Dabei werden verschiedene Anprallarten von Fußgängern an Fahrzeugen simuliert: der Anprall eines Beines an den Stoßfänger, der Anprall des Oberschenkels an die Vorderkante der Fronthaube und der Anprall des Kopfes auf die Fronthaube. Im Beitrag wird auf die Durchführung von Tests zum Oberschenkelanprall und zum Beinanprall an drei verschiedenen Fahrzeugtypen eingegangen. Beschrieben werden Testverfahren, Versuchsaufbau und Versuchsdurchführung. Die Versuchsreihe zeigte, dass das entwickelte Testverfahren praktikabel ist.
Nowadays airbags are part of the standard equipment in almost all new cars. While airbags are saving an increasing number of people from severe injuries and death in moderate and high speed crashes, they do not completely prevent dashboard injuries. The most common mechanism in dashboard injuries is a posteriorly directed force to the proximal tibia with the knee flexed. This may occur during a motor vehicle frontal impact accident when a knee of the driver or the front-seat passenger strikes the dashboard. The posterior force can be combined with a abducting or rotational force leading to concomitant lateral or posterolateral injury. Car and airbag manufacturers therefore develop special inflatable systems to reduce the impact force in dashboard injuries. Every new inflatable system, however, has to be evaluated in out of position situations in which the system might cause injuries to certain body areas. Therefore, we investigated a new kneebag system in different critical seating positions of post mortem test subjects (PMTS). The tested knee airbag module is a folded airbag (18 litre volume) which is installed below the lower section of the instrument panel of a passenger car. Using four PMTS (2 male, 2 female, age 36"67) the following positions were tested: normal seating position, knee flexed >90 degrees and knee flexed <60 degrees in static deployment tests with direct contact. In addition a dynamic test (48.8kph, AAMA-pulse) was carried out with the PMTS belted in a normal seating position. The inflation phase and the impact of the system on the knee/lower leg were analysed by high speed videos. After the test the lower legs of the PMTS were examined by Xray and autopsy. All soft tissue injuries and bone fractures were recorded. All the tests could be evaluated. Except some superficial skin lesions in the impact area no fracture of the bones around the knee and no knee ligament and tendon injuries were observed. Neither video analysis nor autopsy of the PMTS showed any critical contact injuries caused by the inflation process of the bag. Therefore, it can be concluded that in the tested seating positions which are the most critical for the knee area the knee bag system is safe.