23 Deckeneigenschaften
Filtern
Dokumenttyp
- Konferenzveröffentlichung (15) (entfernen)
Schlagworte
- Conference (9)
- Deutschland (9)
- Germany (9)
- Konferenz (9)
- Measurement (6)
- Messung (6)
- Prüfverfahren (5)
- Test method (5)
- Coefficient of friction (4)
- Griffigkeit (4)
- Oberflächentextur (4)
- Reibungsbeiwert (4)
- Surface texture (4)
- Berechnung (3)
- Bewertung (3)
- Calculation (3)
- Contact (tyre road) (3)
- Fuge (3)
- Joint (structural) (3)
- On the spot accident investigation (3)
- Skidding resistance (3)
- Surfacing (3)
- Test (3)
- Untersuchung am Unfallort (3)
- Versuch (3)
- Bearing capacity (2)
- Beton (2)
- Betonstraße (Oberbau) (2)
- Carriageway (2)
- Concrete (2)
- Correlation (math, stat) (2)
- Cracking (2)
- Dauerhaftigkeit (2)
- Decke (Straße) (2)
- Decrease (2)
- Depth (2)
- Durability (2)
- Evaluation (assessment) (2)
- Experimental road (2)
- Fahrbahn (2)
- Kontakt Reifen-Straße (2)
- Lkw (2)
- Lorry (2)
- Messgerät (2)
- Prevention (2)
- Reconstruction (accid) (2)
- Richtlinien (2)
- Rigid pavement (2)
- Rissbildung (2)
- Specifications (2)
- Tiefe (2)
- Tragfähigkeit (2)
- Unfallrekonstruktion (2)
- Verhütung (2)
- Verminderung (2)
- Versuchsstrecke (2)
- Absorption (1)
- Accident (1)
- Achslast (1)
- Air pollution (1)
- Analyse (math) (1)
- Analysis (math) (1)
- Apparatus (Measuring) (1)
- Apparatus (measuring) (1)
- Articulated vehicle (1)
- Asphaltoberbau (1)
- Autobahn (1)
- Axle load (1)
- Belastung (1)
- Beschichtung (1)
- Bewehrung (1)
- Braking (1)
- Bremsung (1)
- Bridge deck (1)
- Bridge surfacing (1)
- Brittleness (1)
- Brückenbelag (1)
- Coating (1)
- Condition survey (1)
- Cooling (mater) (1)
- Decke [Straße] (1)
- Deflectograph (1)
- Deterioration (1)
- Digital model (1)
- Dränasphalt (1)
- Durchbiegungsmesser (1)
- Eigenschaft (1)
- Energie (1)
- Energy (1)
- Environment (1)
- Erfahrung (menschl) (1)
- Evaluation (Assessment) (1)
- Experience (human) (1)
- Fahrbahntafel (1)
- Festigkeit (1)
- Force (1)
- Forschungsbericht (1)
- Frequency (1)
- Frequenz (1)
- Friction (1)
- Fugenfüllung (1)
- Full depth asphalt pavement (1)
- Gelenkfahrzeug (1)
- Georadar (1)
- Gravity (1)
- Grooving (1)
- Ground penetrating radar (1)
- Heissmischgut (1)
- Hot coated material (1)
- Impact study (1)
- Improvement (1)
- In situ (1)
- Injection (mater) (1)
- Injektion (mater) (1)
- Instandsetzung (1)
- Jahreszeit (1)
- Joint sealing (1)
- Kolmatierung (1)
- Kontakt Reifen Straße (1)
- Korea (Süd) (Demokratische Republik) (1)
- Korrelation (math, stat) (1)
- Korrelation [math (1)
- Kraft (1)
- Kunststoff (1)
- Kühlung (mater) (1)
- Laboratorium (1)
- Laboratory (not an organization) (1)
- Lebenszyklus (1)
- Life cycle (1)
- Load (1)
- Luftverunreinigung (1)
- Lärm (1)
- Lärmschutzwand (1)
- Maintenance (1)
- Materialveränderung (allg) (1)
- Mathematical model (1)
- Mean (math) (1)
- Mechanics (1)
- Mechanik (1)
- Mittelwert (1)
- Motorway (1)
- Nanotechnologie (1)
- Nanotechnology (1)
- Nasse Strasse (1)
- Nitrogen oxide (1)
- Noise (1)
- Noise barrier (1)
- Numerisches Modell (1)
- Nutzwertanalyse (1)
- Oberbau (1)
- Oberfläche (1)
- Oxid (1)
- Oxide (1)
- Pavement (1)
- Pavement Management System (1)
- Pavement management system (1)
- Pflasterstein (1)
- Plastic material (1)
- Platte (1)
- Porous asphalt (1)
- Portable (1)
- Probability (1)
- Properties (1)
- Prototyp (1)
- Prototype (1)
- Quer (1)
- Rail traffic (1)
- Rechenmodell (1)
- Reibung (1)
- Reinforcement (in mater) (1)
- Repair (1)
- Republic of Corea (1)
- Research report (1)
- Rillenherstellung (1)
- Road heating (1)
- Schall (1)
- Schallpegel (1)
- Schienenverkehr (1)
- Schwerkraft (1)
- Season (1)
- Sett (1)
- Silting (1)
- Simulation (1)
- Skid resistance (1)
- Slab (1)
- Sound (1)
- Sound level (1)
- Sprödigkeit (1)
- Steifigkeit (1)
- Stickoxid (1)
- Stiffness (1)
- Straßenheizung (1)
- Strength (mater) (1)
- Surface (1)
- Technologie (1)
- Technology (1)
- Titan (1)
- Titanium (1)
- Traffic (1)
- Traffic infrastructure (1)
- Tragbar (1)
- Transfer (phys) (1)
- Transverse (1)
- Umwelt (1)
- Underpinning (1)
- Unfall (1)
- Unterfangung (1)
- Unterhaltung (1)
- Value analysis (1)
- Verbesserung (1)
- Verkehr (1)
- Verkehrsinfrastruktur (1)
- Wahrscheinlichkeit (1)
- Wasser (1)
- Water (1)
- Weather (1)
- Wet road (1)
- Wirksamkeitsuntersuchung (1)
- Witterung (1)
- Zustandsbewertung (1)
- stat] (1)
- Übertragung (phys) (1)
Institut
The Netherlands is on the way to change its existing skid resistance measuring method for its highway network from the Dutch RAW 72, a longitudinal force method, to the Sideway Force method. This method is described in the Technical Specification 15901-8 (SKM device) as well as 15901-6 (SCRIM device) and is in use in 9 European countries. The CEN TC 227 WG5 on Surface Characteristics is currently working on combining of these two technical Specifications into a European standard for Sideway-Force (SWF) measurement devices. The idea of this change in the Netherlands was perceived in 2013 and since then a lot of meetings have been held with the different Dutch decision makers as well as with countries which currently operate SWF devices. There was an intensive exchange of knowledge about these devices and their corresponding quality assurance systems, because the Netherlands wanted to incorporate and rely on an existing system of a neighbor country without losing their present level of quality. The Netherlands has therefore decided to incorporate the German SKM approach. The network monitoring with the new system will start in 2017. To ensure the quality of skid resistance measurements and further cooperation in this field, it has been decided to initiate an alliance between BASt and the Dutch road owner Rijkswaterstaat (RWS). This alliance will facilitate an exchange of research activities, calibration of the Dutch systems according to the existing German Standard as well as control measurements with a BASt-device on the Dutch network during the network monitoring. During 2016 also comparative measurements will be performed on a network level with the current Dutch device and with an SKM device to determine a conversion between the two and to be able to define new threshold values.
Die Ermittlung einer voraussichtlichen Restnutzungsdauer von Verkehrsbefestigungen und somit der Abschätzung des Eingreifzeitpunktes für eine grundhafte Erneuerung ist ohne die Kenntnis der strukturellen Substanz nur sehr unzureichend zu bewerkstelligen. Mit Vorliegen des Entwurfes zu den "Richtlinien zur Bewertung der strukturellen Substanz des Oberbaus von Verkehrsflächen in Asphaltbauweise" (RSO Asphalt) ist zwar ein hierfür nutzbares Verfahren verfügbar, allerdings basiert dieses auf der Analyse von Laborversuchen an den aus Streckenabschnitten zu entnehmenden Bohrkernen, wodurch eine netzweite Anwendung nicht praktikabel ist. Um trotzdem einen umfassenden Einsatz zu ermöglichen und eine deutliche Verbesserung gegenüber bisherigen Verfahren herbeizuführen, können aber begründete Annahmen zu den Materialkennwerten getroffen werden. Alle weiteren Eingangsdaten des Verfahrens decken sich mit denen des bisherigen. Deren Vollständigkeit und Plausibilität muss zukünftig mehr Bedeutung zugemessen werden.
For the determination of the road surface roughness common methods have been established, like Skid Resistance Tester (SRT) or the Sideway-force Coefficient Routine Investigation Machine (SCRIM). Both methods are used to measure a comparable and reliable maximum friction potential value and to assess the quality of the road surface. However, the comparison of the measurements under real conditions and the results of measurements with SRT and SCRIM showed only minor correlations. The paper shows the comparison between these standardised methods and real vehicle braking tests and discusses the results.
In this study, the mean profile depth (MPD) that expresses roughness of road pavements was calculated using the road survey equipment vehicle and the calculated MPD was compared with the real number of traffic accidents. The analysis method used in this study was to classify the appropriate clustering in relation to traffic accidents using the K-means clustering and to compare this with the presence of traffic accidents via the MPDs to derive the result. K-means clustering was used in the analysis method and four clusters were found using the clustering analysis results. The center of each cluster was 0.627, 0.850, 1.118, and 1.237, respectively. The result of this study is expected to be utilized as foundational research in the traffic safety area.
Vorgestellt werden Vorgehensweise, Datenaufbereitung, Modellaufbau und Ergebnisse des BASt-Projekts "Numerische Simulation der Stickoxidminderung durch photokatalytische Oberflächen an Verkehrswegen". Die Vorteile des Konzepts liegen in der Berücksichtigung von Zeitreihen (Eingangsdaten, Ausbreitungsrechnung) und in der Tatsache, dass die Depositionsgeschwindigkeit als zeitlich variable Eingangsgröße bei der Modellierung berücksichtigt wurde. Die Ergebnisse liegen entsprechend als Zeitreihen vor (Jahres- oder Tagesgänge können untersucht werden). Es ergab sich eine Minderung der NO2-Belastung um maximal knapp 1.5% im Nahbereich der Lärmschutzwand. Wesentlicher Faktor bei der Wirksamkeit photokatalytischer Oberflächen ist die Interaktion zwischen Gesamtbelastung und Depositionsgeschwindigkeit im Tagesverlauf.
In der Vergangenheit stiegen die Verkehrsbelastung und der Anteil des Schwerverkehrs auf deutschen Straßen und Autobahnen nahezu stetig. Dies wird sich auch in der Zukunft fortsetzen. Um auch zukünftig Mobilität gewährleisten zu können, sind Bauweisen mit maximaler Nutzungsdauer und minimalen Erhaltungsaufwendungen erforderlich. In Deutschland werden Betonfahrbahndecken als unbewehrte direkt befahrene Betonfahrbahnplatten mit Querfugen in regelmäßigen Abständen gefertigt und für Nutzungsdauern von 30 Jahren konzipiert. Die Querfugen stellen dabei den schwächsten Bereich in der Konstruktion dar. Betonfahrbahndecken können auch als Durchgehend Bewehrte Betonfahrbahndecke gefertigt werden. Dabei stellt sich ein freies Rissbild mit schmalen Plattenstreifen ein. Um eine Querkraftübertragung zu sichern, wird die Rissöffnungsweite durch die Anordnung einer durchgehenden Längsbewehrung beschränkt. Die Erfahrungen zeigen, dass mit dieser Bauweise eine längere Nutzungsdauer und ein höherer Fahrkomfort erreicht werden und weniger Erhaltungsmaßnahmen erforderlich sind. Durchgehend Bewehrte Betondecken eignen sich besonders gut für eine Asphaltüberbauung, da es keine Querfugen als Störstellen gibt. Diese Komposition hat das Potenzial für eine Nutzungsdauer von 50 Jahren und erfordert geringere Kosten, wenn man den gesamten Lebenszyklus betrachtet. Um baupraktische Erfahrungen zu sammeln, wurde im Jahr 2011 auf der Bundesautobahn (BAB) A 94 bei Forstinning in Bayern eine Versuchsstrecke eingerichtet. Diese besteht aus drei Abschnitten von je etwa 4 km Länge: Durchgehend Bewehrte Betondecke mit DSH-V-Überbauung, unbewehrte Betondecke in Plattenbauweise mit DSH-V-Überbauung und unbewehrte Betondecke in Plattenbauweise mit Grinding-Oberfläche. Erste Ergebnisse bezüglich Rissbildung, Bewegungen an den Endspornen, Haftverhalten des Blacktopping und der Schallmessungen liegen vor.
Für die Instandsetzung von schadhaften Betonfahrbahnplatten mittels "Heben und/oder Festlegen" werden in zunehmendem Maße Injektionsmaterialien aus Kunststoff verwendet. Aktuell existieren für die Prüfung und Bewertung derartiger Materialien mittels straßenbauspezifischer Kennwerte jedoch noch keine hinlänglichen Erfahrungen und Prüfvorschriften. In Laborversuchen wurden nunmehr geeignete Prüfungen und Auswertalgorithmen entwickelt und zweckgerichtete Festigkeitskennwerte an ausgesuchten Materialien bestimmt sowie erste Anforderungswerte formuliert. Zudem wurden die Wirksamkeit und die Dauerhaftigkeit von Unterpressungen im Hinblick auf das verwendete Injektionsmaterial in Praxisversuchen überprüft. Aus den Ergebnissen der Tragfähigkeitsmessungen ließ sich vorerst folgern, dass durch das Unterpressen von Fahrbahnplatten die Tragfähigkeits- und Lagerungsbedingungen signifikant verbessert werden können. Unterschiede in der kurzfristigen Wirksamkeit - im Hinblick auf das verwendete Injektionsmaterial - konnten hierbei nicht explizit deduziert werden. Vielmehr zeigte sich, dass die Dauerhaftigkeit maßgeblich von den vorliegenden Randbedingungen, das heisst, faktisch von der richtigen Auswahl des Materials abhängt.
Die neuen TL/ZTV/TP Fug-StB
(2013)
Eine Betondecke kann nur so gut sein wie ihre Fugen und Fugenfüllsysteme. Funktionierende Fugen sind daher ein wesentlicher Bestandteil der Betonstraße. Nur mit funktionierendem Fugenfüllsystem kann die prognostizierte Lebensdauer einer Betondecke von mindestens 30 Jahren erreicht werden. In diesem Sinne wurden im Jahre 2001 die ZTV Fug-StB 01) eingeführt, um durch technische Vorgaben einen hohen Standard bei der Herstellung von Fugen zu gewährleisten. Aufgrund notwendiger Neuerungen, technischer Weiterentwicklung bei der Herstellung von Fugenmassen und -profilen sowie der Umsetzung der Europäischen Normen in das Deutsche Regelwerk war nach 10 Jahren nun eine Überarbeitung notwendig. Der Entwurf der neuen ZTV Fug-StB gliedert sich nach dem Kapitel "Allgemeines" in vier Teile für die unterschiedlichen Fugenfüllsysteme. Die neuen ZTV Fug-StB sind für Beton- und Asphaltflächen ebenso wie für Verkehrsflächen auf Bauwerken, Pflasterflächen, Schienenfugen und Riss-Sanierungen anwendbar. Es werden neu entwickelte Fugenkonstruktionen behandelt. Die Bedeutung funktionierender Fugen und Fugenfüllsysteme wird anhand aktueller Themen sehr deutlich. Derzeit werden verstärkt Schäden bei Fugen an neuen Betondecken, insbesondere Flankenablösungen und Versprödungen der Fugenvergussmasse beobachtet. Hier werden mögliche Schadensursachen ermittelt mit dem Ziel, über die komplexen Wirkungszusammenhänge ein Fugenfüllsystem mit Heißvergussmassen zu entwickeln, das den technischen Anforderungen an das Gesamtsystem "Betonstraße" gerecht wird.
Tempered road system
(2014)
The road performance is strongly influenced by climatic conditions. Winter conditions have massive impact on traffic security but also pavement lifetime decreases as an effect of temperature variation during wintertime and summertime. Heating and cooling of a pavement is a possibility to work against these impacts. To discuss the boundary conditions for an efficient construction and operation of a tempered road system a feasibility study has been made. The study shows the feasibility and identifies thermal energy buffering as a main challenge. When thinking of a fully regenerative operation of a large tempered road system (e.g. 20.000 m-²) the storage volume has to be too large for an economic and structurally engineered satisfactory solution. However, the location dependent usage of natural geothermal storage possibilities and as well smart alignment and construction promises a feasibility realization.
The GIDAS-investigation team of Dresden (VUFO) has documented more than 11.500 accidents since 1999. The documentation of the accident includes beside vehicle-, injury- and environmental-data very detailed reconstruction data. Within this accident investigation the VUFO began to record the skid resistance of the accident site in 2009. The measurements are divided in macro- and microroughness (Sand depth method and Portable Skid Resistance Tester-SRT-by Munro-Stanley London-©). Both methods are used to determine the skid resistance for more than 1000 passenger cars. The aim of the present study is to find out a relationship between the measured skid resistance, the road conditions and the friction coefficient, which is used to calculate the maximum accelerations and decelerations during a reconstruction of an accident. Basic approach to convert the SRT-value into the friction coefficient is the calculation of the theoretical absorbed energy of the spring rubber system of the swinging arm of lever. This absorbed energy is used to get the friction coefficient by using the equations for the work of friction. To consider the road-behavior, in correlation to the friction coefficient, the results will be merged with existing literature. Last step for this study will be a comparison between actual used friction coefficients all over the GIDAS-database and the theoretical results. The study shows, if it is possible to use the SRT-Measurement for the estimation of a friction coefficient for the reconstruction of a traffic accident. As expected, the GIDAS-Database and the additional measurement of the roughness of the road directly on the spot are an enormous useful dataset.
The grip between the road surface and vehicle tires is the physical basis for the moving of all vehicles in road traffic. In case of an accident the available grip level is one of the most relevant influence factors, influencing the causation and the procedure of the accident. However, the estimation of the grip level is not easy and therefore, is commonly not done on the accident scene. This is especially true for the measurement of the water depth. Until now, real accident databases provide no measurement data about the grip level and the water film depth and thus, the estimation of its influence is not possible yet. From the tyre manufacturers point of view, it is important to know about the road conditions (namely grip level, macro-texture, water depth, temperature) at the accident scene, as well as the operating conditions of the vehicles (braking, loss of control, speed, etc). These data is necessary to define relevant tyre traction tests for the end-user and for regulations. For this reason VUFO and Michelin developed a consistent method for the measurements of grip level and water depth for the accidents of the GIDAS database. The accident research team of Dresden, which documents about 1000 accidents with at least one injured person every year, is measuring the micro-roughness and the macro-roughness directly on the spot. For the measurement of the micro-roughness a Skid Resistance Tester (British Pendulum) is used. The Mean Texture Depth (describing the macro-roughness) is measured by the Sand Depth Method. Since June 2009, measurements for more than 700 accidents including 1200 participants have been carried out. In case of wet or damp road conditions during the accident, the water depth is measured additionally. Therefore VUFO and Michelin developed a special measurement device, which allows measurements with an accuracy of 1/10 millimetre. The measurement point at the accident scene is clearly defined and thus, the results are comparable for all different accidents and participants. The use of the GIDAS database and the accident sampling plan allows representative statements for the German accident scenario. With this data it is possible for the first time to have an accurate view of the road conditions at the accident scene. One possibility is a more detailed estimation of hydroplaning accidents using the actually measured water depths. The development of new testing methods and new tires can be based on the real situation of the road infrastructure. Furthermore, the combination of the technical GIDAS data and the measured road surface properties can also be used for the estimation of effectiveness of several safety systems like the brake assist and/or emergency braking systems. The calculation of a reduced collision speed due to the use of a brake assist is only one example for the application of real measured grip level data.
Having a look at safety to traffic and the prevention of accidents it can be observed that technical improvements in active safety of vehicles have let to various positive effects in this area. Among other components the tyre-road-contact takes a key role in the development of active safety technologies. All forces in accelerating, breaking and vehicle guidance have to be transmitted through the tyre-road contact area by friction forces. A common way to characterize a friction process is to identify the coefficient of friction μ between two touching materials. Even though there are several approaches to experimentially characterise road surfaces, no standard method exists. In this paper an overview of existing test methods is given. Furthermore the preliminary design of a newly developed portable test device with its possibility to investigate the tyre-road-friction of arbitrary roads or even places of accidents is shown.
Die Griffigkeit ist die maßgebende Größe für die Übertragung der Langs- als auch der Seitenkräfte von Reifen auf die Straßenoberfläche und hat somit einen erheblichen Anteil an der Straßensicherheit. In Deutschland erfolgt die Erfassung der Straßengriffigkeit im Rahmen von Bauverträgen sowie der Zustandserfassung und -bewertung (ZEB) mit dem Seitenkraftmessverfahren (SKM). Mit der Veröffentlichung der Technischen Prüfvorschriften für Griffigkeitsmessungen im Straßenbau (TP Griff-StB) (SKM) durch die Forschungsgesellschaft für Straßen- und Verkehrswesen (FGSV) am 29.04.2008 ist derzeit das aktuellste Dokument für Griffigkeitsmessungen im Rahmen von Bauverträgen sowie der Zustandserfassung und -bewertung von Bundesfernstraßen mit dem Seitenkraftmessverfahren (SKM) herausgegeben worden. Dieses Dokument löst die TP Griff-StB (SCRIM) mit ihren drei Allgemeinen Rundschreiben ab und fasst die Ergebnisse aus verschiedenen Forschungsprojekten und Erfahrungen aus den regelmäßigen Messungen der Messgerätebetreiber zusammen.
The German Federal Ministry of Economics and Technology is funding a projectrncalled "Leistra2" with the aim of understanding the tire road contact and to find measures to reduce traffic noise, in particular to reduce the noise of tires rolling on pavements, i.e. tire-road noise. The project is composed out of three mayor subjects, low noise tires, low noise pavements and verification of the results, each made out of single sub-projects. The purpose of this paper is to give a survey about Leistra2 and to report about the latest activities and results. More detailed information and contact data of the partners involved can be found at http://www. LeiStra2.de. The program is the successor of the program LeiStra (Leiser Strassenverkehr), dealing with similar topics.rn
In the framework of the OECD study "Moving Freight with Better Trucks", several vehicle combinations which are worldwide in operation were examined regarding different performance criteria. One criterion was the road wear performance of these articulated vehicles. With given tyre and vehicle data (mainly weights and axle loads) the road wear performance was calculated for each vehicle combination. The method according to COST 334 is presented and the vehicle combinations are compared