15 Umwelt
Filtern
Erscheinungsjahr
- 2016 (4) (entfernen)
Volltext vorhanden
- nein (4) (entfernen)
Schlagworte
- Administration (2)
- Boden (2)
- Environment (2)
- Soil (2)
- Umwelt (2)
- Verwaltung (2)
- Weather (2)
- Witterung (2)
- Abfluss (1)
- Absorption (1)
Institut
- Abteilung Straßenverkehrstechnik (4) (entfernen)
This study aimed to better understand nitrate transport in the soil system in a part of the state of North Rhine-Westphalia, in Germany, and to aid in the development of groundwater protection plans. An advection-diffusion (AD) cell was used in a miscible displacement experiment setup to characterize nitrate transport in 12 different soil samples from the study area. The three nitrate sorption isotherms were tested to define the exact nitrate interaction with the soil matrix. Soils varied in their properties which in its turn explain the variations in nitrate transport rates. Soil texture and organic matter content showed to have the most important effect on nitrate recovery and retardation. The miscible displacement experiment indicated a decrease in retardation by increasing sand fraction, and an increase in retardation by increasing soil organic matter content. Soil samples with high sand fractions (up to 94 %) exhibited low nitrate sorption capacity of less than 10 %, while soils with high organic matter content showed higher sorption of about 30 %. Based on parameterization for nitrate transport equation, the pore water velocity for both sandy and loamy soils were significantly different (P < 0.001). Pore water velocity in sandy soil (about 4 x 10 high 3 m/s) was about 100 to 1000 larger than in loamy soils (8.7 x 10 high 5 m/s). On the other hand, the reduction in nitrate transport in soils associated with high organic matter was due to fine pore pathways clogged by fine organic colloids. It is expected that the existing micro-phobicity increased the nitrate recovery from 9 to 32 % resulting in maximum diffusion rates of about 3.5 x 10 high 5 m/s2 in sandy soils (sample number CS-04) and about 1.4 x 10 high 7 m/s2 in silt loam soils (sample number FS-02).
Non-point sources of traffic-related pollution become a major concern as they " compared to the point-source inputs " are more difficult to be defined or controlled. It is crucial to evaluate the fraction of traffic-related contamination that is transported to the road surroundings as it could negatively impact soil, surface water and groundwater. This study describes two means through which pollutants leave the road to the surrounding environment. Three German motorways were selected (A4, A555, and A61), where runoff and deposits were analyzed to determine pollutant load moving into the roadside soil or into the drainage system. Each of the three motorways carries approximately 70,000 vehicles a day on 4 to 6 driving lanes; and they cover a broad range of truck participation in the total traffic load ranging from 5.4% to 19.8%. The three motorways represent several topographical and landscape features as forest with noise barrier and parallel as well as perpendicular orientation to the main wind direction. Sampling of runoff and deposition was done on monthly basis. Bulk deposition was collected in Bergerhoff vessels at two heights (1.5 m and 0.3 m above the ground) and in 1 m, 2.5 m, 5 m and 10 m distances from the road edge. The results showed that heavy metals as well as large amounts of mineral compounds are moving from the driving lanes into the roadside environment. This includes sodium from applying deicing salts in winter seasons, which could be found in soil, dust and water samples. Calcium and iron were also detected in almost comparable concentrations. The annual deposition flow (bulk deposition) measured at a height of 1.5 m was higher than the comparative values for urban areas and background measuring points. The spatial distribution of material deposition showed clear differences between the three motorways. The pollutant load in deposition measured near the ground surface was higher than those measured at 1.5 m above the land surface. At all three sites, a clear negative correlation between pollutant load and the distance from the roadside could be found. Nearly 90% of the concentration values of heavy metals in road runoff were below or in the range of the test values for seepage water in the German Soil Protection and Contamination Ordinance. The pH-values around 7 in runoff and adjacent soil provide a good retention capacity in the soil for the heavy metal input.
Anteile und zeitliche Verteilung von Oberflächenabfluss, Infiltration und Durchsickerung von Böschungen aus teilgesättigten Erddämmen infolge von Niederschlägen und Straßenabfluss sind bisher nur unzureichend bekannt. Für Straßenbauingenieure reicht das vorhandene Wissen über Wasser im Straßen-Erdbauwerk zur Beurteilung der Gebrauchstauglichkeit aus. Für die hydrologische Beurteilung der Durchsickerung im Hinblick auf den Boden- und Grundwasserschutz ist der heutige Wissensstand jedoch nicht ausreichend. Ziel des Projektes ist es, einen dringend benötigten Beitrag zur wirtschaftlichen und umweltverträglichen Verwertung von Ersatzbaustoffen im Erdbau zu leisten und bisher fehlende Beurteilungsmaßstäbe für den Boden- und Grundwasserschutz für die straßenbauspezifischen Gegebenheiten zu liefern. Zur Erreichung des Forschungsziels wurden in der Lysimeteranlage in Augsburg, Derchinger Straße, in acht Becken Böschungen eingebaut, die jeweils einen Ausschnitt aus einer Straßenböschung einschließlich eines Bankettstreifens darstellen. Zur Simulation von belastetem Bodenmaterial wurden dem Böschungsmaterial Schadstoffe zu dotiert. Zusätzlich wurden technische Sicherungsmaßnahmen eingebaut. Ergänzend zu den hydraulischen Größen Niederschlag, Menge von Sickerwasser und Oberflächenabfluss der Lysimeter wurden auch Konzentrationen der zu dotierten Schadstoffe (Cadmium, Kupfer und Cyanid} und weitere Parameter im Sickerwasser der Lysimeter und im Straßenabfluss bestimmt. Das dargestellte Projekt wurde gemeinsam durch die Hochschule Augsburg und die BASt von 2010 bis 2013 durchgeführt. Ein Anschlussprojekt ist derzeit in Bearbeitung.
Umweltgerechte Entwicklung von Verkehr und Infrastruktur - ein verkehrsträgerübergreifender Ansatz
(2016)
Im Expertennetzwerk des Bundesministeriums für Verkehr und digitale Infrastruktur (BMVI) sind seit 2016 die wissenschaftlichen Fachbehörden und Forschungseinrichtungen der Bundesregierung für den Straßenverkehr, die Binnen- und Seeschifffahrt, den Eisenbahnverkehr, die Luftfahrt und der Deutsche Wetterdienst zusammengeschlossen, um gemeinsam an der Entwicklung sicherer und umweltgerechter Verkehrssysteme zu arbeiten. Für die Zusammenarbeit wurden drei große Bereiche definiert, darunter das Themenfeld "Verkehr und Infrastruktur umweltgerecht gestalten". Hier werden zwischen 2016 und 2019 fünf Forschungsprojekte bearbeitet. Sie sind den Themen (1) Lebensraumvernetzung, (2) Biodiversität und Neobiota, (3) Verkehrslärm sowie (4/5) verkehrs- und infrastrukturbedingte stoffliche Umweltbelastungen gewidmet. Der Beitrag umreisst die mittel- und langfristigen Ziele des Expertennetzwerks im Bereich "Infrastruktur/Umwelt" und die Inhalte und Ziele der fünf Projekte der ersten Etappe der Zusammenarbeit.