Filtern
Erscheinungsjahr
- 2017 (146) (entfernen)
Dokumenttyp
- Konferenzveröffentlichung (64)
- Buch (Monographie) (53)
- Wissenschaftlicher Artikel (19)
- Bericht (6)
- Teil eines Buches (Kapitel) (3)
- Arbeitspapier (1)
Schlagworte
- Deutschland (84)
- Germany (84)
- Forschungsbericht (40)
- Conference (39)
- Research report (39)
- Konferenz (38)
- Unfall (31)
- Accident (30)
- Bewertung (28)
- Evaluation (assessment) (26)
An insgesamt zehn willkürlich ausgewählten Baustellen wurden Gussasphaltproben für Kontrollprüfungen entnommen. Gleichzeitig wurden unmittelbar auf den Baustellen Probekörper hergestellt, deren Mischgut nicht - wie bei Kontrollprüfungen üblich - ein zweites Mal erhitzt werden musste. Die Untersuchungen ergaben, dass keine signifikanten Unterschiede bei den statischen und dynamischen Eindringtiefen vorliegen, wenn die Gussasphalttemperaturen bei der Herstellung der Proben 210 -°C, 230 -°C oder 250 -°C betragen haben. Die bei einer Gussasphalttemperatur von 230 -°C hergestellten Proben weisen keine Unterschiede in ihrer Verformungsbeständigkeit auf, wenn die Proben bis zur Prüfung 24, 48 oder 96 Stunden gelagert waren. Das Ergebnis der Eindringtiefen (statisch und dynamisch) unterscheidet sich, ob die Proben unmittelbar auf der Baustelle hergestellt werden oder - wie bei den Kontrollprüfungen - nach nochmaligem Erhitzen der Gussasphaltmassen im Labor. Der Gussasphalt auf der Baustelle in Probenformen eingefüllt ist eindruckempfindlicher. Die Ergebnisse differenzieren um einen konstanten Faktor von 1,3 - 1,5. Insoweit kann das bisherige Verfahren bei Kontrollprüfungen NT-Gussasphalte in Schalen abgefüllt und abgekühlt zur Herstellung von Probewürfeln für ETstat oder Zylinder für ETdyn ins Labor zur bringen beibehalten werden. Man müsste nur die Grenzwerte für die Beurteilung der NT-Gussasphalte entsprechend festlegen. Das bisherige Verfahren, die Proben nicht direkt auf der Baustelle herzustellen, hat den großen Vorteil, dass keine Stromaggregate und Trockenschränke mitgeführt werden müssen, die in schwierigem Gelände unter freiem Himmel die Herstellung der Proben behindern und zu größeren Streuungen der Messergebnisse führen können. Die Messergebnisse der statischen Eindringtiefe nach 30 Minuten und der dynamischen Eindringtiefe nach 2500 Lastwechsel liegen auf derselben Höhe, wenn die Eindringtiefen sehr niedrig um und unter 1 mm liegen. Zwischen 1 und 2 mm statischer Eindringtiefe sind die dynamischen Eindringtiefen um das 2-3-fache höher. In Übereinstimmung mit DIN EN 13108-20 ist bei einer statischen Eindringtiefe unter 2,5 mm der Wert der dynamischen Eindringtiefe zu ermitteln, da eine deutlichere Differenzierung der Ergebnisse erreicht und die Verformungsbeständigkeit des Gussasphaltes in der Wärme damit besser angesprochen werden kann. Insoweit sind die national geltenden Vorschriften z.B. ZTV Asphalt-StB 07 und die TL Asphalt-StB 07 an die DIN EN anzupassen.
Tunnel in Spritzbetonbauweise werden in der Regel mit einem Dichtungssystem aus Kunststoffdichtungsbahnen (KDB) gegen das anstehende Bergwasser abgedichtet. Tunnelabdichtungen aus KDB müssen dabei über die gesamte Nutzungsdauer des Bauwerks zuverlässig ihre Funktion erfüllen. Zur Verifizierung und Kalibrierung von Prüfverfahren zur Langzeitbeständigkeit von KDB können u. a. in situ gealterte KDB-Proben aus bestehenden Straßentunneln sehr nützlich sein. Die Ergebnisse umfangreicher Untersuchungen zu den Materialeigenschaften von KDB-Proben aus insgesamt acht älteren Straßentunneln zeigen, dass einige mechanische Eigenschaften der KDB auf eine bereits stattgefundene Alterung der KDB hindeuten, aber überwiegend noch die Anforderungen der Regelwerke eingehalten werden. Die Ergebnisse der Untersuchungen bestätigen die bereits in der Vergangenheit vorgenommenen Änderungen im Regelwerk und sind auch bei der aktuellen Fortschreibung der Zusätzlichen Technischen Vertragsbedingungen und Richtlinien für Ingenieurbauten (ZTV-ING) eingeflossen.
Twenty-eight percent of traffic accidents in Japan are rear-end collisions, and of these, 13% are multiple collisions (three or more vehicles and/or roadside objects). A post-crash braking system enables the driver to stop the vehicle in a short distance after a rear-end collision to prevent secondary collisions. In this study, the effectiveness of a post-crash braking system was examined using a drive recorder database. In 64% of rear-end collisions, the driver's braking was interrupted after the collision. The stopping distance was estimated with time data from the drive recorder. We predict that the brake assist would be effective in preventing secondary collisions in 21% of cases.
Chronic non-cancer pain (CNCP) is a major health problem. Patients are increasingly treated with chronic opioid therapy (COT). Several laboratory studies have demonstrated that long-term use of opioids does not generally impair driving related skills. But there is still a lack of studies investigating on-the-road driving performance in actual traffic. The present study assessed the impact of COT on road-tracking and car-following performance in CNCP patients. Twenty CNCP patients, long-term treated with stable doses of opioid analgesics, and 19 healthy controls conducted standardized on-the-road driving tests in normal traffic. Performance of controls with a blood alcohol concentration (BAC) of 0.5 g/L was used as a reference to define clinically relevant changes in driving performance. Standard Deviation of Lateral Position (SDLP), a measure of road-tracking control, was 2.57 cm greater in CNCP patients than in sober controls. This difference failed to reach statistical significance in a superiority test. Equivalence testing indicated that the 95% CI around the mean SDLP change was equivalent to the SDLP change seen in controls with a BAC of 0.5 g/L and did not include zero. When corrected for age differences between groups the 95% CI widened to include both the alcohol reference criterion and zero. No difference was found in car-following performance. Driving performance of CNCP patients did not significantly differ from that of controls due to large inter-individual variations. Hence in clinical practice determination of fitness to drive of CNCP patients who receive opioid treatments should be based on an individual assessment.
The UN Regulation No. 79 is going to be amended to allow automatically commanded steering functions (ACSF) at speeds above 10 km/h. Hence, requirements concerning the approval of automatically performed steering manoeuvres have to be set in order to allow safe use of automatic steering on public roads as well as improve overall road safety for the driver and the surroundings. By order of the German Federal Ministry of Transport and Digital Infrastructure (BMVI), BASt developed and verified physical test procedures for automatic steering to be implemented in UN Regulation No. 79. The usability of currently available test tools was examined. The paper at hand describes these test procedures and presents results from verification tests. The designated tests are divided in three sections: functionality tests, verifications for the transition of control and emergency tests. System functionality tests are auto matic lane keeping, automatic lane change and an automatic abort of an initiated lane change due to traffic. Those tests check if the vehicle remains in its lane (under normal operating conditions), is able to perform safe automatic lane change manoeuvres and if it considers other road users during its manoeuvres. Transition tests examine the vehicle's behaviour when the driver fails to monitor the system and in situations when the system has to hand over the steering control back to the driver. For instance these tests provoke driver-in-the-loop requests by approaching system boundary limitations, like missing lane markings, surpassing maximum lateral acceleration in a bend or even a major system failure. Even further the driver and his inputs are monitored and if the system detects that he is overriding system actions or contrary want to quit the driving task and unfastens the seat belt, it has to shut down and put the human back into manually control and the responsibility of driving. The last series of test consists of two emergency situations in which the system has to react to a time critical event: A hard decelerating vehicle and a stationary vehicle in front both with no lane change possibility for the ACSF vehicle. Some of the tests, especially the emergency manoeuvres, require special target vehicles and propulsion systems. Since no fully automatic steering vehicles are available, a current Mercedes E-Class with Mercedes' "drive pilot" system was used. It was shown that the vehicle is automatically able to brake to a full stop towards a static Euro NCAP target from partial-automatic driving at 90 km/h, that it could brake towards a rapidly decelerating lead vehicle when travelling at 70 km/h, that it was able during partially automatic driving to remain in its lane in normal operation conditions and to perform a automatic (driver initiated) lane change while surveilling the driver- activities.
At IAM RoadSmart we share the excitement about autonomous cars " who wouldn't! However over half of the drivers we polled supported concentrating on making drivers safer " among IAM RoadSmart members it was 70%. Driverless cars are still years away but delivering safer drivers can help reduce death and injury from tomorrow. Governments, academics and car makers need to work hard to convince sceptical British and American drivers that autonomous cars can deliver the benefits promised such as a 90% plus reduction in road deaths.
Driver distraction
(2017)
This report for the Institute of Advanced Motorists (IAM) summarises recent research and knowledge from scientific studies about distracted driving. The report defines what it means to be "distracted" when driving, discusses the impact of distraction on driver behaviour and safety, and what can be done to reduce distracted driving. The focus of distraction discussed here relates to how drivers engage with technology when driving. The report begins with a background to driver distraction, followed by discussion about what is actually meant by driver distraction. It is then considered why humans cannot successfully do two things at the same time, particularly within the context of driving. The subsequent section summarises the scientific research findings to date with regard to driver distraction and technology, and how this affects different types of road user. Recommendations for how driver distraction can be mitigated in the real world and a summary conclude the report. Responses to common questions raised by drivers are presented in Appendix A.
Unter dem Begriff "Intelligente Brücke" erfolgt in einem Forschungscluster der Bundesanstalt für Straßenwesen die Entwicklung eines adaptiven Systems zur kontinuierlichen Bereitstellung relevanter Informationen für eine ganzheitliche Zustandsbewertung durch den Einsatz von geeigneter Sensorik in Verbindung mit Analyse- und Bewertungsverfahren. Hierdurch werden online Hinweise auf zu erwartende Schädigungen und Zustandsänderungen ermöglicht. Im Rahmen des digitalen Testfelds Autobahn werden ausgewählte Entwicklungen "Einwirkungsüberwachung", "Instrumentierte Fahrbahnübergänge und Lager" sowie "Sensornetze" an einer Spannbetonbrücke im Autobahnkreuz Nürnberg umfänglich vorgestellt und damit bundesweit zugänglich gemacht. Das Gesamtsystem besteht aus den Komponenten eines Informationssystems zur Analyse und Bewertung von Messdaten instrumentierter Bauteile. Die dabei durchzuführenden Untersuchungen beziehen sich auf die fortlaufende Aktualisierung des objektbezogenen Lastmodells und Analysen zur Restlebensdauer der Brücke sowie der untersuchten Bauteile. Die erfassten und aufbereiteten Informationen werden der zuständigen Straßenbauverwaltung online zur Verfügung gestellt. Das System wird im Rahmen eines fünfjährigen Untersuchungsprogramms betrieben, analysiert und weiterentwickelt.
Except for corrective steering functions automatic steering is up to now only allowed at speeds up to 10 km/h according to UN Regulation No. 79. Progress in automotive engineering with regard to driver assistance systems and automation of driving tasks is that far that it would be technically feasible to realise automatically commanded steering functions also at higher vehicle speeds. Besides improvements in terms of comfort these automated systems are expected to contribute to road traffic safety as well. However, this safety potential will only be exhausted if automated steering systems are properly designed. Especially possible new risks due to automated steering have to be addressed and reduced to a minimum. For these reasons work is currently ongoing on UNECE level with the aim to amend the regulation dealing with provisions concerning the approval of steering equipment. It is the aim to revise requirements for automatically commanded steering functions (ACSF) so that they can be approved also for higher speeds if certain performance requirements are fulfilled. The paper at hand describes the derivation of reasonable system specifications from an analysis of relevant driving situations with an automated steering system. Needs are explained with regard to covering normal driving, sudden unexpected critical events, transition to manual driving, driver availability and manoeuvres to reach a state of minimal risk. These issues form the basis for the development of test procedures for automated steering to be implemented in international regulations. This holds for system functionalities like automatic lane keeping or automatic lane change as well as for addressing transition situations in which the system has to hand over steering to the driver or addressing emergency situations in which the system has to react instead of the driver.
The Decision Support System (DSS) is one of the key objectives of the European co-funded research project SafetyCube in order to better support evidence-based policy making. Results will be assembled in the form of a DSS that will present for each suggested road safety measure: details of risk factor tackled, measure, best estimate of casualty reduction effectiveness, cost-benefit evaluation and analytic background. The development of the DSS presents a great potential to further support decision making at local, regional, national and international level, aiming to fill in the current gap of comparable measures effectiveness evaluation. In order to provide policy-makers and industry with comprehensive and well-structured information about measures, it is essential that a systems approach is used to ensure the links between risk factors and all relevant safety measures are made fully visible. The DSS is intended to become a major source of information for industry, policy-makers and the wider road safety community.