Filtern
Erscheinungsjahr
- 2005 (98) (entfernen)
Dokumenttyp
Schlagworte
- Accident (38)
- Unfall (38)
- Conference (33)
- Konferenz (33)
- Deutschland (31)
- Germany (31)
- Forschungsbericht (23)
- Research report (22)
- Fahrzeug (21)
- Vehicle (21)
Institut
Der Bauwerksbestand in Bundesfernstraßen und gleichermaßen in Landes-, Staats- und Kommunalstraßen stammt zum überwiegenden Teil aus der Phase des Wiederaufbaus Deutschlands in den Jahren 1960-1980. Die Bauwerke haben somit ein durchschnittliches Alter von 30 bis 50 Jahren erreicht, was sich inzwischen an zunehmenden Schäden an den Bauwerken zeigt. Die ständige Beobachtung und Prüfung der Bauwerke erhält somit eine zentrale Bedeutung im Rahmen der Sicherheitsphilosophie des Ingenieurbaus und des Bauwerksmanagementsystems. Bauwerksprüfungen nach DIN 1076 sind daher in Zukunft ein wichtiger werdendes Aufgabenfeld, für das gut ausgebildetes und geschultes Personal vorhanden sein muss, um den sehr komplexen Bauwerksbestand richtig beurteilen zu können. Wegen des weiter voranschreitenden Personalabbaus bei den Verwaltungen, wird es dabei zunehmend notwendig werden auch Externe mit dieser verantwortungsvollen Aufgabe zu betrauen. Hierzu ist es Voraussetzung, dass auch diese Bauwerksprüfingenieure die notwendige Qualifikation und Erfahrung haben.
This contribution introduces a number of psychological methods of analysis that are based on the practice-oriented collection of information directly at the site of an accident and that allow for an analysis and coding of the accident causes. Investigation examples and examples of the data combinations with basic medical and technical data are outlined. Objective of the collection is the inter-disciplinary investigation of human factors in the causes of accidents ("human-factor-analysis"). The psychological data are incorporated according to an integrative model for accident causes based on empiric algorithms in the data base of the accident research, where the clustered evaluation potential of comprehensive factors of the accident development can be illustrated. The central theoretical concept for the basic model of the progress of the accident from a psychological point of view comprises psychological indicators for the evaluation of the site of the accident for the analysis of the perception conditions as well as a classification of the gleaned data into the accident progress model according to chronological and local criteria. Perception conditions, action intentions and executions as well as conditions limiting perception and actions are acquired, using a questionnaire for persons involved in an accident, and are also integrated into the data structure concerning weighted feature characteristics as well as combined with other relevant features. Suitable systematization tools for the collection and coding of psychological accident development parameters have to be provided, which require primarily a model image of the corresponding processes from the persons involved in the accident (perceptions, expectations, decisions, actions). The interactive accident model contains components of the models by KÜTING 1990, MC DONALD 1972, SURREY 1969 and RASMUSSEN 1980. Based on the inter-action of the three partial systems "person", "vehicle" and "environment", the first step is the assessment of the situation by the persons involved in the accident. This is dependent on the personal attitudes and motives, on experiences and expectations concerning the progress of the situation. Subsequently, data concerning the manner of the coping with the ambiguous state as well as with the instable state (emergency reaction immediately before the accident occurs) are collected. The factors relating to the persons involved in the accident are gathered on several levels using corresponding questionnaires. The coding of the found and collected characteristics is conducted in a multidimensional evaluation relating to the technical results of the accident reconstruction and of the psychological classification, which are subsequently integrated in coded form into the data base of the accident research. The result of this analysis is a description of the development of the accident depicted on a chronological vector from a perception and decision theoretical perspective. This is explained in detail using exemplary cases.
The European Enhanced Vehicle-safety Committee wants to promote the use of more biofidelic child dummies and biomechanical based tolerance limits in regulatory and consumer testing. This study has investigated the feasibility and potential impact of Q-dummies and new injury criteria for child restraint system assessment in frontal impact. European accident statistics have been reviewed for all ECE-R44 CRS groups. For frontal impact, injury measures are recommended for the head, neck, chest and abdomen. Priority of body segment protection depends on the ECE-R44 group. The Q-dummy family is able to reflect these injuries, because of its biofidelity performance and measurement capabilities for these body segments. Currently, the Q0, Q1, Q1.5, Q3 and Q6 are available representing children of 0, 1, 1.5, 3 and 6 years old. These Q-dummies cover almost all dummy weight groups as defined in ECE-R44. Q10, representing a 10 year-old child, is under development. New child dummy injury criteria are under discussion in EEVC WG12. Therefore, the ECE-R44 criteria are assessed by comparing the existing P-dummies and new Q-dummies in ECE-R44 frontal impact sled tests. In total 300 tests covering 30 CRSs of almost all existing child seat categories are performed by 11 European organizations. From this benchmark study, it is concluded that the performance of the Q-dummy family is good with respect to repeatability of the measurement signals and the durability of the dummies. Applying ECE-R44 criteria, the first impression is that results for P- and Q-dummy are similar. For child seat evaluation the potential merits of the Q-dummy family lie in the extra measurement possibilities of these dummies and in the more biofidelic response.
Im Rahmen dieses Forschungsvorhabens sollten die Erkenntnisdefizite betreffend der Anwendung des Auditverfahrens für Innerortsstraßen auf eine größere Anzahl unterschiedlichster kommunaler Entwurfsaufgaben unter Berücksichtigung der je vorliegenden strukturellen, prozessrelevanten Rahmenbedingungen, abgebaut werden. Hierzu wurden in drei Modellkommunen verwaltungsspezifische Verfahren zur Durchführung des Sicherheitsaudits mit internen Auditoren entwickelt. Es wurden insgesamt 46 Audits durchgeführt und sowohl personenbezogen als auch projektbezogen analysiert. Durchschnittlich wurden ca. 11 Defizite je Projekt festgestellt, wobei 55% der Defizite den Knotenpunkten zuzurechnen sind. Von diesen entfielen wiederum 60% auf Probleme für Fußgänger und Radfahrer. Gut 30% der Defizite bezogen sich auf Strecken, von denen wiederum 80% auf Fußgänger und Radfahrer entfielen. Insgesamt betrafen gut 30% aller Defizite unmittelbar die Radverkehrsführung und 27% den Fußgängerverkehr. Die Akzeptanz der Auditergebnisse war hoch: So wurde in der Vorplanungsphase den Feststellungen des Audits zu 74%, in der Vorentwurfsphase bzw. Ausführungsphase zu 65% bzw. 57% gefolgt. In der Phase der Verkehrsfreigabe war die Bereitschaft den Auditergebnissen zu folgen mit 20% gering. Die mit den Auditergebnissen "konfrontierten" Planer beurteilten den Beitrag des Sicherheitsaudits zum Projekt überwiegend positiv, stellten keine Verzögerung im Planungsablauf fest und würden überwiegend die regelmäßige Durchführung von Audits begrüßen. Die Unfallanalyse konnte keine belastbaren Ergebnisse erbringen. In den drei Kommunen wurden 9 Verwaltungsmitarbeiter/innen zu Auditoren ausgebildet. Ein besonderer Effekt dieser Art der Auditorenschulung liegt in der gleichzeitigen Auditierung von Projekten für die Kommunen während der Schulung durch die Mitarbeiter und den Dozenten. Die durchgeführte Qualifizierungsanalyse ergab, dass die Auditoren ihre Kenntnisse im Straßenentwurf, im Straßenverkehrsrecht und in Unfalluntersuchungen verbessert haben. Sie empfinden das Sicherheitsaudit als eine Qualitätssteigerung in der Planung.
Der Parkraum in den Innenstädten ist zu einem knappen Gut geworden. Deshalb wird schon seit vielen Jahren eine flächendeckende Bewirtschaftung aller verfügbaren Parkstände und Stellplätze angestrebt. Bisher sind gemäß § 13 StVO die Parkuhr, der Parkscheinautomat und bei Gebührenfreiheit auch die Parkscheibe zur Parkraumbewirtschaftung zugelassen. In den vergangenen Jahren wurden verschiedene neue Methoden und Systeme entwickelt, welche die Parkraumbewirtschaftung vereinfachen sollen. Hinsichtlich der Anwendung dieser neuen Methoden und Systeme besteht aber noch eine große Unsicherheit, da es bisher nur wenige Erfahrungen über ihre Einsatzfähigkeit und ihre Einsatzgrenzen gibt. Ziel dieser Untersuchung war es, die heute vermehrt angebotenen alternativen Methoden und Systeme zur Überwachung der Parkdauer sowie zur Zahlung der Parkgebühren im Detail darzustellen. Dabei wurden ihre Einsatzmöglichkeiten und Einsatzgrenzen analysiert und bewertet. Neben der Überprüfung der tatsächlichen Tauglichkeit und Einsatzfähigkeit waren die rechtlichen Rahmenbedingungen darzustellen und die Akzeptanz für die Nutzung solcher Systeme zu untersuchen. Dabei wurden nur Systeme einbezogen, die im öffentlichen Straßenraum anwendbar sind. Dem deutschen Gesetzgeber wird grundsätzlich empfohlen, die alternativen Systeme in Deutschland zuzulassen, wenn die Anpassungen der Systeme an den deutschen Markt erfolgt sind. Eine Anpassung des Rechts sollte auf der Grundlage der Ergebnisse dieser Untersuchung erfolgen und aus Sicht des Gutachters parallel zur Durchführung von Pilotprojekten vorbereitet werden. Die rechtlichen Randbedingungen in Deutschland sind von den Systemanbietern einzuhalten und die Technik ist daran anzupassen. In Deutschland sind im Hinblick auf das Straßenverkehrsrecht, den Datenschutz und die Parkraumpolitik der Kommunen Änderungen bei den Systemen erforderlich. Durch die rechtliche Notwendigkeit, dass auch bei Einführung eines alternativen Systems weiterhin ein konventionelles System angeboten werden muss, verursacht ein alternatives System auf jeden Fall zusätzlichen Aufwand für die Kommune. Wenn diese sich für die Einführung alternativer Systeme entschieden hat, sind in Zusammenarbeit der Kommune und des jeweiligen Systemanbieters die Randbedingungen der Einführung festzulegen. Die Parkraumpolitik sollte durch die Systeme unterstützt, nicht aber von der Technik diktiert werden.
Nach einführenden Bemerkungen zum Thema Aggression im Straßenverkehr werden die Ursachen von Aggression im Straßenverkehr erörtert. Das Missverhältnis zwischen Verkehrsmenge und zur Verfügung stehender Infrastruktur bleibt nicht ohne Einfluss auf das Verhalten der Verkehrsteilnehmer. Typische unerwünschte Verhaltensweisen bei hohem Verkehrsaufkommen sind beispielsweise das Nichteinhalten des Sicherheitsabstandes, das Drängeln, riskante Überholmanöver oder das Fahren mit nicht angepasster Geschwindigkeit. Daraus resultieren vielfach Verhaltensweisen, die aus verkehrspsychologischer Sicht wesentliche Übereinstimmungen mit Merkmalen des aggressiven Verhaltens aufweisen. Ein Modell des aggressiven Fahrens differenziert zwischen drei Entstehungsbedingungen für Ärger beim Fahren: 1. Differenz zwischen der Geschwindigkeit, die der Verkehrsteilnehmer fahren möchte, und jener, die er aufgrund der verkehrlichen Umstände fahren kann; 2. Vorausfahrende Fahrzeuge, die trotz einer ausreichenden Lücke auf der rechten Spur nicht ausweichen; 3. Aggressiv herannahende drängelnde Fahrer. Die Interaktion aversiver Effekte kann dazu führen, dass das aggressive Verhalten Einzelner zu einem aggressiven Fahrstil weiterer Verkehrsteilnehmer führt. Die Zahl der Unfälle ist zwar seit den 70er Jahren rückläufig, bei Einbeziehung der Unfallanalyse zeigt sich jedoch, dass mangelnder Sicherheitsabstand sowie unangemessene Geschwindigkeit in der Mehrzahl der Unfälle die Hauptunfallursache darstellen. Die Lösung der beschriebenen Problematik ist sehr wahrscheinlich nur langfristig durch intensive Informations- und Aufklärungsarbeit zu erreichen.
Portugal has the highest rate of road fatalities in Europe (2002 and for Eur-15 - CARE database). For this highest rate, the accidents involving pedestrians and motorcycle occupants have a higher contribution than the European average. In the last years, especially accidents involving motorcycles have been investigated and currently two different projects are being carried out, one related with motorcycles accidents and the other with pedestrian accidents. In these projects, countermeasures among others to reduce the fatalities between these two types of road users are being studied. These accidents are investigated with the commercial accident reconstruction software PCCRASH but also new methodologies based on multibody dynamics are in development in order to more accurately study these two types of accidents. In this paper, the methodologies in use for accident reconstruction and new methodologies in development are presented. Speeding his found to be one of the major causes of road fatalities for pedestrians and motorcycle occupants. In the case of motorcycle accidents, these involve mainly young drivers. Aspects as social behavior are also important to understand the causes of some of these accidents. Some examples of accidents occurring in Portugal, involving especially motorcycles and pedestrians are presented and discussed.
Nigeria ranks one of the highest countries in the world with the largest accident, especially when measured by whiplash associated disorders, whereas, traffic safety education rate, data and information been widely known as preventive indicators have been grossly neglected. In Nigeria, traffic safety enlightenment, awareness, political understanding and appreciation of the problem's magnitude are lacking. This study, therefore, seeks to understand and document the fact that accident causation factors in Nigeria relate more to the problem of development, poverty, knowledge and education as evidenced in most other developing countries. Among the primary accident causation factors on Nigerian roads are: - lack of a transportation system or multi-model integration - sub-standard and obsolete vehicles and road furniture - poor road maintenance, investment and engineering management - paucity of road users' and drivers' knowledge, skill, enlightenment and education of the road Use This paper submits that Nigeria being a developing nation requires purely primitive strategies being cost effective (health wise) than curative measures. It is in this light that an enduring, comprehensive and sustainable traffic safety educational programmes information base and data inventory, analysis and implementations form the focus of this study. This effort will provide basic guidelines framework and implementation procedure for a successful prevention of whiplash associated disorder resulting from road traffic crashes in Nigeria and other parts of the world.
Motorcycle riders are one of the most vulnerable road users. Annually, on estimate 6000 people are killed in motorcycle accidents in the former 15 EU countries. The objective of this research was to investigate and analyze the main aspects and causes of this vulnerability and the accidents in general. For this aim around 70 accidents in The Netherlands were investigated in the framework of an international research program (MAIDS). Also a control group of motorcycles with riders was investigated so that exposure could be taken into account. An important result is that human failure is in 82% of the cases the main cause of the accident, in 52% this is due the other vehicle driver. Perception and decision failures are the most common failures. The most injuries are caused by the environment but they are typically only less severe (AIS1). Injuries caused by the car (front and side) are typically severe injuries (AIS4+). Previous convictions of the MC rider seem to be related to the chance to get involved in an accident. It was shown that the Dutch and the total MAIDS accident sample are comparable.
Der Vorschlag, dass alle Kraftfahrzeuge auch am Tag mit Licht fahren sollen, wird seit vielen Jahren national und international diskutiert. Aufgrund dessen hat das Bundesministerium für Verkehr, Bau- und Wohnungswesen die Bundesanstalt für Straßenwesen beauftragt, die Auswirkungen des Fahrens mit Licht am Tag auf die Straßenverkehrssicherheit in Deutschland im Rahmen eines Forschungsprojektes genauer zu untersuchen. Auf der Basis einer Bewertung der internationalen Literatur zur Wirksamkeit des Fahrens mit Licht am Tag kommt die BASt zu dem Ergebnis, dass bei obligatorischer Einführung dieser Verkehrssicherheitsmaßnahme in der Bundesrepublik Deutschland eine deutliche Verbesserung der Verkehrssicherheit erwartet werden kann. Die Unfallrückgänge liegen in einer Größenordnung von über 3%. Die Befürchtung, dass sich demgegenüber Nachteile für schwächere Verkehrsteilnehmer, insbesondere Motorradfahrer, ergeben und deren Unfallhäufigkeit steigt, konnte nicht erhärtet werden. Die obligatorische Einführung des Fahrens mit Licht am Tag ist unter gesamtwirtschaftlichen Gesichtspunkten auch effizient. Den zu erwartenden Sicherheitsnutzen in Höhe von umgerechnet 1 Mrd. € je Jahr stehen Kosten in Folge des zunehmenden Kraftstoffverbrauchs und der damit verbundenen Emissionen in Höhe von 630 Mio. € (ungünstigster Fall: Fahren mit Abblendlicht) gegenüber. Auf lange Sicht sinken mit speziellen Tagfahrleuchten diese Kosten auf 150 Mio. € (Tagfahrleuchten in Glühlampentechnik) oder sogar nur 60 Millionen Euro (Tagfahrleuchten in LED-Technik). Es wird deshalb empfohlen, - für Neufahrzeuge eine Ausrüstung mit Tagfahrleuchten mit automatischer Aktivierung, gekoppelt an die Zündung, vorzuschreiben, - sowie einen Dämmerungsschalter zur automatischen Einschaltung des Abblendlichts obligatorisch einzuführen. Um einen nachteiligen Sicherheitseffekt durch die Durchmischung mit beleuchteten und unbeleuchteten Fahrzeugen zu vermeiden, ist für Altfahrzeuge ohne spezielle Tagfahrleuchten das Fahren mit Licht am Tag ganzjährig auf dem gesamten Straßennetz dringend zu empfehlen. Die Empfehlung für den bestehenden Kraftfahrzeugbestand sollte spätestens zum Zeitpunkt der Einführung der Ausstattungsvorschrift für die Neufahrzeuge ausgesprochen werden.
Vehicle crash research at different levels is currently being conducted by several investigation groups in Spain, in some instances within various EU-funded projects. However there is a clear opportunity for increasing compatibility and maximizing usefulness, both at national and European levels, of the information collected by these groups. After reviewing on-going activities and programs in different countries, a framework for a nationwide crash investigation project is proposed: an organizational scheme is suggested as part of a future National Road Safety Strategic Plan; a map of investigation teams located in technological centres, universities and police agencies in Spain is presented; alternatives for several practical aspects such as team composition, deployment and operational budgets and project developmental stages are also discussed.
In order to improve the protection of children transported in cars, within the CHILD programme (GR3D-CT2002-00791) real world road accidents are thoroughly analysed and then reconstructed in laboratory. Prior to comparing injury severities of real victims to physical parameter values measured on the dummies, the quality of the reconstructions is evaluated by experts who use their experience based on the investigation of numerous and various accidents. This paper presents a new tool aiming at better evaluating and validating accident reconstructions. It is based on statistical evaluation of vehicle deformations which gives weighing factors for every part of the car body structure finally leading to a specific Reconstruction Quality Score (RQS indicator). Furthermore, the reliability of this score, depending on the number of measured points, can be established. This tool includes a function aiming at adjusting the speed for a further reconstruction and at defining the launching speed and the pulse shape for complementary sled tests. Finally, the functions of the RQS software and database are presented.
Pelvic fracture, cracking or breaking of a portion of the pelvis are extremely common injuries in the side impact collisions of motor vehicles. Due to both its shape and structural architecture, mechanics of the pelvic bone is complicated. There is a lack of knowledge regarding the dynamic behavior of the pelvis and its biomechanical tolerance under impact environment. Hence this study is aimed at the understanding of the mechanical response of the human pelvis with three-dimensional finite element (FE) models, under side impact load, applied through a structure, equivalent to a car door. The door structure was modeled, considering few layers, consisting of foam (Styrodur®, 3035 CS), plastic (UHMWPE), steel, glass and steel, putting them in series. A soft tissue layer (equivalent to fat) was also considered on the greater trochanter location. These FE models (with and without the car door structure) were analyzed with ANSYS-LS-DYNA-® dynamic finite element software to compare the effect of the car door padding system for shock absorption. It was observed that with proper combination of shock absorbing material (foam, etc.) and its thickness, the transmission of impact load to the body part (pelvis, etc.) from the outer surface of the car door could be reduced.
Road safety is a major preoccupation of the European Commission and the road transport industry and depends on numerous significant factors. In order to improve road safety and to plan effective safety improvement actions for truck transport, we must first identify the problems to be addressed, i.e. what are the main causes of truck accidents. The ETAC project, initiated by the European Commission and the IRU, was launched in order to set up a heavy goods vehicle accident causation study across European countries to identify future actions which could contribute to the improvement of road safety. The results will be based on a detailed analysis of truck accident data collected in seven European countries according to a common methodology which has been elaborated through numerous national and European projects. This paper describes the common methodology used to collect the information on the scene of the accident and to analyse the data so that the reconstruction of the crash events may be carried out. CEESAR proposes a methodology using its experience gained from over 10 years of accident data collection. This methodology is based on an in-depth investigation of the parameters involved in-an accident and linked to the driver, the vehicle, the road and their environment. In-depth investigation requires accident investigator presence on the scene of the accident in order to collect volatile information such as marks on the road, weather conditions, visibility, state and equipment of the vehicle, driver interview. Later, passive and active information is gathered, either at the hospital for the driver, at the garage for the vehicle or on the spot for the road geometry. A reconstruction carried out with the help of specific software and the analysis of the data collected and calculated enables the identification of the main causes of the accident and the future actions to plan in order to improve road safety as regards truck traffic.
Die amtliche Straßenverkehrsunfallstatistik kann nur in begrenztem Umfang Informationen zu Unfallentstehung, Unfallablauf sowie zu den zugrunde liegenden Verletzungsmechanismen bereitstellen. Verbleibende Informationslücken lassen sich durch spezielle Erhebungsteams schließen, die Verkehrsunfälle nach wissenschaftlichen Aspekten dokumentieren. Hierzu unterhalten das Bundesministerium für Verkehr, Bau- und Wohnungswesen und die Bundesanstalt für Straßenwesen seit 30 Jahren ein Forschungsprojekt zur Unfalldatenerhebung an der Medizinischen Hochschule Hannover. Seit 1999 erfolgt eine Kooperation mit der Forschungsvereinigung Automobiltechnik (FAT), die ein weiteres Erhebungsteam an der Technischen Universität Dresden unterhält. Die Unfalldaten gehen in die gemeinsame GIDAS-Datenbank ein, aus der sich umfassende Informationen zu den breit gefächerten Forschungsfeldern "Passive und aktive Fahrzeugsicherheit", "Verkehrs- und Rettungsmedizin" und "Straßenbezogene Sicherheitsfragen" gewinnen lassen. In der Zukunft werden Unfallvermeidungsstrategien und Unfallursachenprophylaxe im Vordergrund einer prospektiven Unfallforschung stehen. Die Daten werden auch in Zukunft für die weitere Verbesserung der Verkehrssicherheit einen bedeutenden Beitrag leisten.
In recent years considerable progress in active and passive safety of road vehicles has been made. The road traffic of today is much safer than in the past. A current vehicle has a lot more safety elements resulting in an improved inner and outer technique. In most European countries the number of fatalities is decreasing despite growing traffic and road usage. Nevertheless, the number of casualties in road traffic accidents is high enough, thus more progress is needed if the number of fatalities is to be reduced by 50%, as postulated by the European Commission for the year 2010. In order to develop countermeasures and further possibilities for injury prevention, it is increasingly important to have accident data available, supplying results quickly and giving the best overview across Europe. In-Depth-Data Sampling Procedures have a huge historical development, starting in the 60ies by the car manufactures, continued during the 70ies mostly by some universities mainly in England, Sweden, France and Germany, today a net of in-depth-investigation teams are working across Europe and around the world.One of the oldest teams is located at the Hannover Medical School, founded in 1973 by the German Government on behalf of the Federal Highway Research Institute Bast. It was the only team worldwide that was equipped with blue light emergency cars, working on scene in time so directly after the event and working continuously during the years, collecting 20 thousand accidents within 30 years period. Since 1999 the order is carried out in cooperation with the German car industry, which is interested and has benefit on the data too. On the basis of the new data collection, so called GIDAS (German In-Depth Accident Study), that has been run at the Technical University Dresden and the Medical University Hannover), a special tool for In-Depth-Accident Analysis was founded. It is the task of this conference to build a platform for such research based on In-Depth-Investigation. The conference is specially aimed at the area of accident data analysis in order to contribute to the harmonization of different investigation methods and accumulation of different results that does exist for different countries worldwide. Up to now no special conference did exist to deal with accident data only following in the discussion for an improvement in traffic and vehicle safety. ESAR - expert symposium on accident research - should be a step forward. This first international conference is being organized by the Accident Research Unit at the Medical University Hannover jointly with the German Federal Highway Research Institute Bast and the Research Association of German Car Manufacturers FAT. The conference should be a platform for an interdisciplinary exchange of information based on the different presentations from participants around the world.
Die Bundesanstalt für Straßenwesen (BASt) führt seit 1957 Eignungsprüfungen von Fahrbahnmarkierungen durch. Diese erfolgten bis 1980 auf Prüffeldern. Vor circa 20 Jahren wurde es unter anderem aus Gründen der Verkehrssicherheit und zur Gewährleistung der Vergleichbarkeit und Reproduzierbarkeit der Prüfergebnisse notwendig, ein Laborverfahren zur Durchführung dieser Aufgabe zu entwickeln. Folge hiervon sind die seit 15 Jahren mit Hilfe der Rundlaufprüfanlage durchgeführten und inzwischen europaweit anerkannten Eignungsprüfungen von Markierungssystemen. Durch die Einführung Europäischer Normen und der Notifizierung der BASt als Prüf-, Überwachungs- und Zertifizierungsstelle im Rahmen der Bauproduktenrichtlinie wurden Änderungen beim Prüfverfahren, der angewandten Prüfmethoden und der räumlichen Gegebenheiten notwendig. Im vorliegenden Beitrag werden die technische Weiterentwicklung der Anlage und die durch äußere Umstände notwendig gewordenen Änderungen des Prüfverfahrens der Eignungsprüfung von Markierungssystemen beschrieben. Gleichzeitig werden die Daten der seit 1989 durchgeführten Eignungsprüfungen einer quantitativen Analyse unterzogen.
Der Sinn der ortsfesten Geschwindigkeitsüberwachung ("Starenkästen") liegt darin, die Einhaltung der zulässigen Höchstgeschwindigkeiten an besonders gefährlichen Stellen und Strecken im Straßennetz zu überwachen. Mit diesem Instrument wird erreicht, dass bereits nach kurzer Zeit die örtlichen Tempolimits eingehalten werden. Die Folge sind Unfallrückgänge von 50 bis 85 Prozent, und zwar insbesondere bei den schweren Unfällen. Dennoch halten sich in der Öffentlichkeit, bei Kommunalpolitikern und teilweise auch bei den Fachverwaltungen noch immer eine Reihe von Vorurteilen, die im Beitrag aufgegriffen und diskutiert werden. Außerdem ist erstmals eine Übersicht über die derzeitigen Standorte der etwa 2.100 Starenkästen zur Geschwindigkeitsüberwachung in Deutschland nach Bundesländern, Straßenkategorien und zulässiger Geschwindigkeit zusammengestellt. Schließlich wird ein kurzer Ausblick auf aktuelle Forschungsvorhaben zur Verkehrsüberwachung in Europa gegeben. In diesem Maßnahmenfeld besteht noch ein hohes, ungenutztes Sicherheitspotenzial.