Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (16) (entfernen)
Sprache
- Englisch (16) (entfernen)
Volltext vorhanden
- ja (16) (entfernen)
Schlagworte
- Germany (10)
- Research report (9)
- Deutschland (8)
- Safety (8)
- Forschungsbericht (6)
- Sicherheit (5)
- Activity report (4)
- Road traffic (4)
- Test (4)
- Transport infrastructure (4)
Annual report 2011/2012
(2013)
Traffic on German roads is increasing continuously. The research of the Federal Institute for Materials Research (BASt) is concerned with a road system that will be functioning well in the future, that is safe and economically and ecologically sustainable. Every two years, BASt reports on its tasks, research projects and selected administrative topics. The current report comprises the years of 2011 and 2012. On 151 pages, it provides an idea of current research about important topics of roads and traffic. The projects SKRIBT and SKRIBTPlus examined the behaviour of drivers in tunnels in hazardous situations. It was discovered that in situations like this many people often react inadequately and too late. The collected data were used to develop new concepts that improve behaviour in hazardous situations in tunnels. In recent years, new safety systems that improve braking behaviour in hazardous situations have been installed in vehicles. However, for end users it is difficult to compare different systems because they have no access to suitable assessments. The EU project ASSESS (Assessment of Integrated Vehicle Safety Systems for improved vehicle safety) in which BASt is involved as a key partner therefore developed a uniform procedure for assessment and legal questions. Many European countries agree: Alcohol, drugs and medication in road traffic constitute a safety risk on European roads. In order to gain new insights and to develop suitable countermeasures, the European Commission approved of the largest research project to improve road safety to date: DRUID (Driving Under the Influence of Drugs, Alcohol and Medicines). This BASt-coordinated project took five years and involved institutes from 18 European countries. The result is a comprehensive stock taking and concrete suggestions on measures to be taken. A mayor part of the work of BASt also comprises extension and maintenance of the entire road infrastructure. The report "How will we make constructions in the future: Road construction without oil?" for instance examines the question how we will maintain and extend our roads in the future with resources becoming scarcer and more expensive. Furthermore, the campaign "on" the road plays a major part at BASt. For years there has been a shortage of parking spaces for trucks on federal highways. To remedy this situation, BAST has developed a new control approach: The so-called compact parking system increases capacities and uses them more effectively by parking trucks in a line according to their planned departure time.
Annual report 2018
(2019)
With this annual report, BASt is giving the 2018 research year a face. A part of its work is present and in the focus of the public, for example the field test of long trucks, the unique research area duraBASt at the motorway junction Cologne East or the innovative measuring vehicle MESAS for the condition assessment of road surfaces in flowing traffic. A large part of the BASt's work is less effective in attracting public attention but no less important, such as the essential updating of regulations, the testing and approval of products and processes, and the compilation of forecasts and statistics. More than 50 employees report on their research activities and thus give an insight into the tasks of BASt with its core areas of vehicle technology, traffic safety, traffic engineering, road construction as well as bridge and civil engineering. Highlights as well as facts and figures in short and concise form complete the report.
Annual Report 2019
(2020)
In its Annual Report 2019, the BASt has compiled a selection of its research. For example, the climate impact analysis, among other things, describes an essential research focus for the federal main road network. The new information and evaluation platform "BaustellenCheck" is presented, and reports on digitization in road equipment and maintenance as well as on various activities on the innovative test site duraBASt.
The results of current simulator and test track studies are also part of the annual report, as are the results of level 3 automation studies in real road traffic with an appropriately equipped test vehicle. Approaches to solutions for the infrastructure requirements of automated driving on motorways and federal trunk roads are presented, as well as the current status of the development of regulations in the field of vehicle technology.
The BASt scientists investigated the significance of virtual reality in road safety work. Whether influencers can be used effectively in road safety communication was also considered, as well as other proposed measures to reduce the risk of accidents, especially among young novice drivers.
Highlights as well as facts and figures in short and concise form complete the report.
Annual Report 2020
(2021)
The focus of the Annual Report 2020 is on selected research results from all fields of activity of the BASt.
Among the topics are for example the re-evaluation of the alcohol ban for novice drivers, the effectiveness of emergency braking systems for trucks or risk factors in motorbike traffic. ‘Talking’ workplaces will be discussed as well as the communication of automated vehicles with non-automated road users and airbag safety systems for cyclists.
The traffic barometer shows how traffic developed during the Corona pandemic. Also presented are technical developments to avoid road closures, the RITUN guide for resilient road tunnels, concrete roadway 4.0, how occupational safety demands and promotes innovation, and cross-national research cooperation in road construction.
Results on safe rural roads through suitable protective devices, on the use of digital technologies in engineering structures, on sustainable innovative replacement of concrete bridges as well as BASt activities in the BMVI Network of Experts are also presented.
Highlights as well as facts and figures complete the report.
Annual Report 2021
(2022)
In the Annual Report 2021, the BASt presents a selection of research activities of the year 2021.
In almost 40 contributions, projects from 5 specialist areas are presented. The spectrum of topics ranges from digital transformations in bridges and structural technology to sustainable, climate-resistant highway construction, efficient, ecological and digital traffic engineering, automated, environmentally conscious automotive engineering and the safety of all who participate in traffic.
Highlights as well as facts and figures in short and concise form complete the report.
Camera-monitor systems (CMS) can be used in motor vehicles to display the driver's rear view on a monitor mounted inside the vehicle. This also offers the possibility of replacing conventional exterior mirrors with suitable CMS and thereby implementing new design concepts with aerodynamic advantages. However, as exterior mirrors are safety-relevant vehicle parts for securing the driver's indirect rear view (requirements specified in UN Regulation No. 46), the question arises whether CMS can provide an equivalent substitute for mirrors. In the scope of this study, CMS and conventional exterior mirrors were compared and assessed in test drives and static tests under different external conditions. On the one hand, the examination of technical aspects, and on the other hand, issues pertaining to the design of the human-machine interaction, were the objects of the study. Two vehicles were available for the trials with passenger vehicles: A vehicle, manufactured in small series, which is already equipped with CMS as sole replacement for the exterior mirrors, as well as a compact class vehicle which had a CMS retrofitted by the car manufacturer in addition to conventionally used exterior mirrors. The latter could be covered exclusively for trips with CMS. A tractor unit with semitrailer was available for the truck trials. The driver's cabin was equipped with a CMS system developed by the vehicle manufacturer. In general, it was shown that it is possible to display the indirect rear view sufficiently for the driver, both for cars and trucks, using CMS which meet specific quality criteria. Depending on the design, it is even possible to receive more information about the rear space from a CMS than is possible with mirror systems. It was also shown that the change from mirrors to CMS requires a certain period of familiarisation. However, this period is relatively short and does not necessarily result in safety-critical situations.
A series of drop tests and vehicle tests with the adult head impactor according to Regulation (EC) 631/2009 and drop tests with the phantom head impactor according to UN Regulation No. 43 have been carried out by the German Federal Highway Research Institute (BASt) on behalf of the German Federal Ministry of Transport, Building and Urban Development (BMVBS). Aim of the test series was to study the injury risk for vulnerable road users, especially pedestrians, in case of being impacted by a motor vehicle in a way described within the European Regulations (EC) 78/2009 and (EC) 631/2009. Furthermore, the applicability of the phantom head drop test described in UN Regulation No. 43 for plastic glazing should be investigated. In total, 30 drop tests, thereof 18 with the adult head impactor and 12 with the phantom head impactor, and 49 vehicle tests with the adult head impactor were carried out on panes of laminated safety glass (VSG), polycarbonate (PC) and laminated polycarbonate (L-PC). The influence of parameters such as the particular material properties, test point locations, fixations, ambient conditions (temperature and impact angle) was investigated in detail. In general, higher values of the Head Injury Criterion (HIC) were observed in tests on polycarbonate glazing. As the HIC is the current criterion for the assessment of head injury risk, polycarbonate glazing has to be seen as more injurious in terms of vulnerable road user protection. In addition, the significantly higher rebound of the head observed in tests with polycarbonate glazing is suspected to lead to higher neck loads and may also cause higher injury risks in secondary impacts of vulnerable road users. However, as in all tests with PC glazing no damage of the panes was observed, the risk of skin cut injuries may be expected to be reduced significantly. The performed test series give no indication for the test procedure prescribed in UN Regulation No. 43 as a methodology to approve glass windscreen not being feasible for polycarbonate glazing, as all PC panes tested fulfilled the UN R 43 requirements. The performance of the windscreen area will not be relevant for vehicle type approval according to the upcoming UN Regulation for pedestrian protection. However, it is recommended that pedestrian protection being considered for plastic windscreens to ensure at least the same level of protection as glass windscreens.
With the aim of identifying suitable indicators and criteria for evaluating the safe human-machine interaction for SAE level 3 systems up to 60 km/h in the context of automated driving, this research project has started with a focus group interview to identify relevant publication channels and list of keywords regarding indicators for the evaluation of human-machine interaction at SAE Level 3. Based on the identified list of keywords, literature reviews have been conducted to extract relevant publications from the identified publication channels. According to the defined inclusion and exclusion criterion, 38 papers have then been selected and used for meta-analysis to study the influence of different takeover situations on takeover performances. The results of meta-analysis have indicated that drivers’ takeover performances measured by the categories of takeover time, takeover quality and subjective workload are different in static and dynamic situations. After that, expert interviews have been conducted with six international experts to help interpret the results of meta-analysis and develop checklist items. In the end, 16 checklist items assigned in six categories of system requirements have been developed and can be used by international experts to evaluate the safety of the human-machine interaction of SAE Level 3 systems up to 60 km/h in production vehicles. This checklist has been further developed to an online application, which can be used as an easy-to-implement and efficient evaluation procedure in relation to the traffic safety relevant interaction quality of the system.
This report presents the results of a stakeholder analysis which has been performed by the EasyWay Cooperative Systems Task Force. The stakeholder analysis aims at identifying potential roles of the road operator in the operation process of selected cooperative services and describing expectations and aspirations related to the future roles and responsibilities from a European road operator- point of view. The following cooperative services have been considered in the stakeholder analysis: Hazardous location notification, Traffic jam ahead warning, Road works warning, Automatic access control and Parking management. The stakeholder analysis used findings from previous projects and performed own studies based on desk research and expert assessments which were carried out by the task partners. The approach includes the development of high-level descriptions showing functional schemes of the operational process chains and potential roles / responsibilities related to the road operator. A deepened analysis was performed by assessing the functional schemes / role profiles and collecting opportunities, concerns, and success factors from a road operator- perspective.
At the beginning of the year 2000 the European Commission set the goal to halve the number of road deaths till the year 2010. The main focus are passenger car and lorry traffic. A significant reduction of the accident data could be reached in these groups. The advancement of active vehicle safety systems is an important issue of the programme. The safety of the motorcycle traffic has been disregarded till now. Since 1991 the number of killed motorcycle riders per year has been constant. The number of killed passenger car occupants has been more than halved in the same period. This is why initiatives are caused for the increase of the motorcycle safety. A great safety potential is expected for the Antilock Brake System (ABS). ABS for motorcycles is considered from the economic view in this study. A cost-benefit analysis shall clarify whether the economic benefit of ABS for motorcycles is greater than the consumed resources. Moreover, a sensitivity analysis will determine the maximal justifiable consumption in resource for which ABS is worthwhile. After the sensitivity analysis is done a break-even analysis will determine the market price respectively the annual mileage from which on ABS is worthwhile on user level. For this the fair end consumer market price is calculated which the user is ready to pay. For the considered market prices the annual mileage is determined from which on ABS is worthwhile for the user. The considered time horizon for this analysis are the years 2015 and 2020. For each of these years the accident data is forecasted. At this, it is assumed that the frequency of having an accident per million registered motorcycles decreases based on the present trend. Thus, riding motorcycle gets safer. Hence, the accident data in the years 2015 and 2020 is lower than the accident data today. The cost-benefit analysis is done for each year for four scenarios. Two scenarios handle the market penetration. The first one is the trend scenario, the second one is the mandatory equipment from the year 2010 on. The other scenarios describe the effectiveness of ABS. The effectiveness rates are determined by a literature review. The only potential which can be considered due to the available data is the potential due to an avoiding of the downfall just before the real accident happens. According to this the number of accidents will decrease by 2.4 %. The number of fatalities will decrease by 12.1 %. The number of severe injuries decreases by 11.7 %. However, the number of slight injuries increases by 2.1 %. The mentioned effectiveness rates are valid for the scenarios with the high effectiveness. Even these figures underestimate the actual effectiveness because there are only considered the avoided accidents with downfall. The necessary consumption in resources depends on the produced volume. The more ABS systems are produced, the lower are the costs per system. This is due to realised effects of scale and effects out of learning curves. The system costs depend on the penetration rate. In the trend scenario the system costs for ABS are 120 Euro for the year 2015 respectively 105 Euro for the year 2020. In the mandatory scenario the system costs are 115 Euro for the year 2015 respectively 100 Euro for the year 2020. The benefit-cost ratios are all over the critical barrier of 1.0. Thus, ABS is worthwhile on economic level. In the scenarios with high effectiveness the benefit-cost ratios range between 4.6 and 4.9. Thus, the values are even above the barrier of 3.0. The result of the break-even analysis is that ABS is worthwhile on user level. The considered market prices are 400 Euro in 2015 and 300 Euro in 2020. They are clearly below the determined fair end consumer market prices. The fair end consumer price for the year 2015 is 701 Euro respectively 622 Euro for the year 2020. Thus, ABS is worthwhile for motorcycle riders with an annual mileage higher than 2,200 km (year 2015) respectively 1,900 km (year 2020). The annual mileage of a motorcycle rider is 3,900 km on average. Thus, ABS is worthwhile for most of the motorcycle riders. The mentioned results are valid for the high effectiveness scenarios.