Filtern
Erscheinungsjahr
Dokumenttyp
- Konferenzveröffentlichung (39) (entfernen)
Volltext vorhanden
- ja (39) (entfernen)
Schlagworte
- Evaluation (assessment) (39) (entfernen)
Institut
Internationale Aktivitäten der Forschung auf dem Gebiet "Passive Sicherheit von Kraftfahrzeugen"
(2000)
Eine Fülle von Aktivitäten ist derzeit auf den Gebieten Frontal- und Seitenstoß zu beobachten, die in Europa auf den beiden entsprechenden EG-Richtlinien aufbauen. Das EEVC führt seine Arbeiten, an denen die Automobilindustrie beteiligt ist, fort; hier sind insbesondere die Arbeiten zum Seitenstoß (Kopfaufprall und Barrierenvergleich) zu nennen. Auf weltweiter Ebene beginnen die Arbeiten der IHRA (International Harmonised Research Activities) in ein konkretes Stadium der Zusammenarbeit einzutreten. Auf dem Gebiet der Seitenkollision ist längerfristig ein neues Testverfahren geplant, in das der von ISO entwickelte WORLD-SID einbezogen werden soll. Es gibt derzeit viele ernsthafte Bemühungen der Forschung um Harmonisierung. Auch wenn es nicht zu einer weltweiten Harmonisierung kompletter Regelungen kommt, so gibt es doch Hoffnung auf eine weltweite Harmonisierung von definierten Teilbestimmungen in speziellen Regelungen, so zum Beispiel bezüglich der Testmethode, der Versuchspuppen und der Bewertung der Schutzkriterien. Der Name des EEVC, European Enhanced Vehicle-safety Committee, steht für die Weiterentwicklung der Fahrzeugsicherheit. Die beteiligten Regierungen sind überzeugt, dass moderne Technologien neue Möglichkeiten eröffnen, um die Sicherheit der Kraftfahrzeuge weiter zu verbessern.
Um die Automobilhersteller zu animieren, mehr als die gesetzlich geforderte Sicherheit anzubieten, haben strengere Versuche im Rahmen des Verbraucherschutzes in den letzten Jahren nicht nur in den USA, sondern auch in Europa deutlich an Bedeutung zugenommen. Besonders Initiativen aus England ist es zu verdanken, dass sich heute die Testverfahren nach dem sogenannten Euro NCAP, dem European New Car Assessment Programme, durchgesetzt haben. Diese Entwicklung wurde auch von der Europäischen Kommission unterstützt. Ziel des Euro NCAP ist es, die unabhängige und objektive Bewertung des Sicherheitsniveaus von Fahrzeugen zu einer transparenten und leicht verständlichen Verbraucherberatung zu fördern. Weiterhin sollen objektive Bewertungsverfahren entwickelt werden, um die Fahrzeughersteller zu ermutigen, die Fahrzeuge sicherer zu machen. Im Beitrag wird auf die Struktur des Euro NCAP sowie auf seine Arbeitsweise eingegangen. Vorgestellt werden ferner bisherige Testphasen mit Fahrzeugen deutscher Hersteller oder Tochtergesellschaften sowie deren Bewertung.
Systematik zur Bewertung der Auswirkungen von Sicherheitseinrichtungen im Kraftfahrzeug (BASE)
(2000)
BASE kann als eine Art "Guide" zur Unterstützung im Prozess der Evaluation von Informations- und Sicherheitseinrichtungen (ISE) in Hinblick auf psychologische Auswirkungen eingesetzt werden. Es ist in Bewertungsbereiche gegliedert, die ihrerseits wiederum den verschiedenen Phasen der Marktdurchdringung zugeordnet sind: (1) Phase vor der eigentlichen Nutzung, (2) Phase der Nutzung und (3) Phase nach vorangeschrittener Diffusion der neuen Technologie. Für die Entwicklung von Informations- und Sicherheitseinrichtungen im Fahrzeug ist es erforderlich, die Sicherheitsanforderungen an solche Einrichtungen zu definieren. Hier stellt das vorliegende Bewertungssystem BASE einen umfassenden Rahmen dar. Ebenso lässt es sich zur Bewertung bereits bestehender Einrichtungen heranziehen. Dabei stehen neben den sensorischen, kognitiven, motivationalen, affektiven und verhaltensbezogenen Reaktionen einer Person auch die Auswirkungen der ISE auf die Sicherheit des Verkehrssystems zur Bewertung an. In diesem Zusammenhang werden der Prozess der reaktiven Verhaltensanpassung und der Marktdurchdringung als Einflussfaktoren auf die Verkehrssicherheit diskutiert.
Die Anzahl von Informationsdisplays in Fahrzeugen nimmt ständig zu. Neben vielen positiven Aspekten gibt dieser Trend auch Anlass zur Befürchtung, dass die Aufmerksamkeit des Fahrers zu stark in Anspruch genommen und er von der eigentlichen Fahraufgabe abgelenkt wird. Um Sicherheitsrisiken zu vermeiden, ist eine unverzichtbare Auflage an solche Informationsdarstellungen, dass sie schnelle und sichere Informationsaufnahme sowie -verarbeitung gewährleisten und den Fahrer so gering wie möglich beanspruchen. Eine kritische Variable zur Bewertung stellt somit die Zeit dar, die benötigt wird, um solche Darstellungen richtig ablesen zu können. Die Okklusionsmethode bietet die Möglichkeit, sowohl die Geschwindigkeit der Informationsverarbeitung als auch deren Genauigkeit zu erfassen. Es wird entweder die Zeit gemessen, wie lange die Informationsdarstellungen betrachtet werden, oder es wird die Genauigkeit der Ablesung in Abhängigkeit von der Darbietungsdauer der Darstellung ermittelt. In einer Serie von 5 Experimenten wurde das Okklusionsverfahren als Bewertungsinstrument für das Design von einfachen Displays evaluiert. Die durchgeführten Experimente werden im Beitrag vorgestellt. Zusammenfassend stellt sich die Okklusionsmethode als geeignetes Instrument zur Bewertung von Informationsdarstellungen dar, da sie sowohl bei vorgegebenen Präsentationszeiten als auch bei selbstgewählten Betrachtungszeiten zwischen unterschiedlich komplexen Darstellungen zu trennen vermag. Zudem weisen die Ergebnisse darauf hin, dass die Okklusionsmethode auch geeignet ist, um Informationsdarstellungen zu trennen, welche die Wiederaufnahme einer Aufgabe nach einer Unterbrechung unterschiedlich schwer gestalten.
Since its creation in 2011 the Pre-Crash-Matrix (PCM) offers the possibility to observe the pre-crash phase until five seconds before crash for a wide range of accidents. Currently the PCM contains more than 8.000 reconstructed accidents out of the GIDAS (German In-Depth Accident Study) database and is enlarged continuously by more than 1.000 cases per year. Hence, a detailed investigation of active safety systems in real accident situations has been made feasible. The PCM contains all relevant data in database format to simulate the pre-crash phase until the first collision of the accident for a maximum of two participants. This includes the definition of the participants and their characteristics, the dynamic behavior of the participants as time-dependent course for five seconds before crash as well as the geometry of the traffic infrastructure. The digital sketch of the accident and information from GIDAS as well as from supplementary databases represent the main input for the simulation of the pre-crash phase of an accident with the VUFO simulation model VAST (Vufo Accident Simulation Tool). This simulation in turn embodies the foundation of the PCM. The PCM underlies continual improvements and enhancements in consultation with its users. In addition to collisions of cars with other cars, pedestrians, bicycles and motorcycles the PCM now also covers car to object and car to truck collisions. The paper illustrates car to truck collisions as a showcase and explains perspectives for further developments. In 2016 a more detailed definition of the contour of the vehicle was added. Furthermore, the geometrical surroundings of the accident site will be provided in a new structure with a higher level of detail. Thus, a precise classification of road marks and objects is possible to further improve the support of developing and evaluating ADAS. This paper gives an overview about the latest developments of the PCM with its innovations and provides an outlook to upcoming enhancements. Besides potential areas of application for the development of ADAS are shown.
The advent of active safety systems calls for the development of appropriate testing methods. These methods aim to assess the effectivity of active safety systems based on criteria such as their capability to avoid accidents or lower impact speeds and thus mitigate the injury severity. For prospective effectivity studies, simulation becomes an important tool that needs valid models not only to simulate driving dynamics and safety systems, but also to resolve the collision mechanics. This paper presents an impact model which is based on solving momentum conservation equations and uses it in an effectivity study of a generic collision mitigation system in reconstructed real accidents at junctions. The model assumes an infinitely short crash duration and computes output parameters such as post-crash velocities, delta-v, force directions, etc. and is applicable for all impact collision configurations such as oblique, excentric collisions. Requiring only very little computational effort, the model is especially useful for effectivity studies where large numbers of simulations are necessary. Validation of the model is done by comparison with results from the widely used reconstruction software PC-Crash. Vehicles involved in the accidents are virtually equipped with a collision mitigation system for junctions using the software X-RATE, and the simulations (referred to as system simulations) are started sufficiently early before the collision occurred. In order to assess the effectivity, the real accident (referred to as baseline) is compared with the system simulations by computing the reduction of the impact speeds and delta-v.
Whiplash injuries are characterized by the high variability of its symptoms and by the subjectivity of its diagnosis, which sometimes leads to frauds perpetrated by victims of rear-end impacts. It is estimated that whiplash injuries cost annually about 10.000 million Euros in Europe. Therefore, the aim of this study was to investigate the influence of the dynamics of the accident in which the victim was involved in the probability of development of whiplash associated injuries. In the presented methodology, first an accident reconstruction is performed where the dynamics of the accident is determined. This is carried out using the software PC-Crash, police and insurance companies' data. Then biomechanical injuries criteria related with whiplash injuries are evaluated. For the evaluation of the probability of having whiplash injuries, the Neck Injury Criterion (NIC) of the victim and the mean acceleration of the vehicle were evaluated. Then, with medical reports, the results of the accident reconstruction are correlated with the reported injuries. Some examples are presented. The results obtained indicate that the study of the dynamics of the road accidents in which the victims were involved could be used as an auxiliary of the prognosis of whiplash injuries and is important for a precise diagnosis of this type of injuries.
From an automotive safety occupant protection standpoint, effective occupant restraint requires a system capable of providing non-injurious occupant ride down of anticipated crash forces. This is not only the case for frontal collisions, where occupant restraint is provided primarily by seatbelts and airbags, but is also critical for other crash modes such as side impacts, rear impacts, rollovers, as well as multiple impact events. In the rear impact crash mode, occupant restraint is provided primarily by the seatbacks and to some extent the seatbelts. Foundationally, therefore, what becomes fundamental to the seatback's role in rear occupant protection is its ability to contain the occupant within the seat, preventing occupant ramping, as well as preventing the seat's, and/or its occupant's, dangerous intrusion into the rear occupant's survival space where contact with rear compartment components and/ or rear seated occupants can present a significant injury risk. An analysis is presented of a series of rear impact sled testing conducted by the authors that evaluates the timing, position and extent of the front seatback's reward displacement toward and into the rear occupant compartment as well as consideration of the front seat occupant' ramping potential and its injury potential relative to the rear compartment. Additionally, three other series of testing are presented which assess various seat designs occupant retention capabilities. Lastly, a matched-pair comparison test series is presented which evaluates occupant motion in rear impact with and without use of a typical vehicle body mounted 3-point seatbelt. Discussion of restraint system performance observed in all the testing is included along with ATD biofidelity and thigh-gap considerations. The data collected and presented includes accelerometer instrumentation and high speed video analysis.
This study investigates the protection offered by passive head-restraints with different stiffness and energy dissipation properties. For this purpose, computational multi-body models of a generic car seat and a biofidelic 50thpercentile male human for rear impact are used to study different seat designs and passive head-restraints. The validated seat-occupant model is also used in the design of two different car-seat models which are shown to effectively mitigate whiplash by utilising a crash-energy distribution technique. Five different passive head-restraints with varying stiffness (low-medium-high) and energy dissipation percentages (low-high) are successively attached to four different car-seat models. The simulation results indicate that the protection offered by head restraints is strongly dependent on the seat design. It has also been shown that the stiffness of the passive head-restraint has much more influence on whiplash-risk in comparison to its energy dissipation capacity.
The Decision Support System (DSS) is one of the key objectives of the European co-funded research project SafetyCube in order to better support evidence-based policy making. Results will be assembled in the form of a DSS that will present for each suggested road safety measure: details of risk factor tackled, measure, best estimate of casualty reduction effectiveness, cost-benefit evaluation and analytic background. The development of the DSS presents a great potential to further support decision making at local, regional, national and international level, aiming to fill in the current gap of comparable measures effectiveness evaluation. In order to provide policy-makers and industry with comprehensive and well-structured information about measures, it is essential that a systems approach is used to ensure the links between risk factors and all relevant safety measures are made fully visible. The DSS is intended to become a major source of information for industry, policy-makers and the wider road safety community.