Filtern
Dokumenttyp
Schlagworte
- Jahreszeit (3) (entfernen)
Institut
- Abteilung Straßenbautechnik (3) (entfernen)
Urban runoff is known to transport a significant pollutant load consisting of e.g. heavy metals, salts and hydrocarbons. Interactions between solid and dissolved compounds, proper understanding of particle size distribution, dissolved pollutant fractions and seasonal variations is crucial for the selection and development of appropriate road runoff treatment devices. Road runoff at an arterial road in Augsburg, Germany, has been studied for 3.5 years. A strong seasonal variation was observed, with increased heavy metal concentrations with doubled and tripled median concentrations for heavy metals during the cold season. Correlation analysis showed that de-icing salt is not the only factor responsible for increased pollutant concentrations in winter. During the cold period, the fraction of dissolved metals was lower compared to the warm season. In road dust, the highest metal concentrations were measured for fine particles. Metals in road runoff were found to show a significant correlation to fine particles SS63 (<63 μm). Therefore, it is debatable whether treatment devices only implementing sedimentation processes provide sufficient removal rates.
Tempered road system
(2014)
The road performance is strongly influenced by climatic conditions. Winter conditions have massive impact on traffic security but also pavement lifetime decreases as an effect of temperature variation during wintertime and summertime. Heating and cooling of a pavement is a possibility to work against these impacts. To discuss the boundary conditions for an efficient construction and operation of a tempered road system a feasibility study has been made. The study shows the feasibility and identifies thermal energy buffering as a main challenge. When thinking of a fully regenerative operation of a large tempered road system (e.g. 20.000 m-²) the storage volume has to be too large for an economic and structurally engineered satisfactory solution. However, the location dependent usage of natural geothermal storage possibilities and as well smart alignment and construction promises a feasibility realization.
Der Benkelman-Balken zählt zu den weltweit verbreitesten Untersuchungsverfahren zur zerstörungsfreien Ermittlung der elastischen Verformung einer Straßenbefestigung unter statischer Belastung. Der Einfluss unterschiedlicher Temperaturen im bituminös gebundenen Oberbauteil auf die Einsenkungsmesswerte ist allerdings für die in Deutschland festgelegte Messmethodik und die hier vorhandenen Befestigungen noch nicht näher betrachtet worden. Im Rahmen der vorliegenden Untersuchung wird dazu auf theoretischem und empirischem Weg eine eingehende Analyse dieses Einflusses vorgenommen. Auf der Basis umfangreicher Temperaturmessreihen werden schließlich Angaben über die Temperatur in 10 cm Tiefe eines bituminösen Oberbaus in Abhängigkeit von der Jahreszeit und der Oberflächentemperatur abgeleitet. Für Temperaturen über 20 Grad Celsius an der Straßenoberfläche können die Oberbautemperaturen dabei je nach Befestigungsart und Tagesstunde aus Tabellen abgelesen werden. Darauf aufbauend wird eine mittlere Oberbautemperatur definiert, die anschließend als Grundlage von Umrechnungsverfahren für Einsenkungsmesswerte auf eine Standardtemperatur von 20 Grad Celsius dient. Die Verfahren werden für Straßenbefestigungen ohne und mit hydraulisch gebundenen Tragschichten getrennt entwickelt. Dabei kann die mittlere Oberbautemperatur zwischen 5 und 36 Grad Celsius liegen. Einsenkungswerte sind damit untereinander vergleichbar und die Bewertung der Wirkunken anderer Einflüsse im Straßenkörper auf die Tragfähigkeit wird möglich.