Filtern
Dokumenttyp
Sprache
- Englisch (3) (entfernen)
Schlagworte
- Traffic count (3) (entfernen)
Institut
The current maintenance management for bridges is mainly based on visual inspection and aims at the repair of identified damages. In the project cluster "Smart Bridge" an adaptive system for holistic evaluation in real time is developed. The following pilot studies show significant aspects of the Smart Bridge. Within the research project "Digital Test Area Autobahn" a new constructed prestressed concrete bridge is implemented with instrumented expansion joints and bearings, a "RTMS©" and a sensor network. By using analytical bridge models and evaluation methods the condition and reliability of the bridge as well as the remaining service life is determined. In the pilot study "duraBASt" sensors for the detection of durability and structural safety as well as data analyzing and evaluation procedures are investigated. The aim of this study is the partial implementation of the aspects: data collection, data processing and model development for condition assessment of the bridge.
Traditionally, traffic count statistics in Germany contain the so-called relevant hourly volume, which is defined as the 30th-highest hour of the year when listing the hourly volumes in descending order. When the first edition of the German Highway Capacity Manual (HBS) was prepared in 2001, the Federal Government decided that this 30th hour should be used as the basis for the level of service determination for all Federal freeways and trunk roads. While German freeways are quite well equipped with inductive loop detectors, there are much fewer counts on rural roads and almost no long-term data on urban roads. With the current redraft of the German HBS detailed advice will be given on how to estimate peak-hour demand (all vehicles and heavy vehicle portion), based on the n-th highest hour concept depending on the available traffic counts. As the HBS will be divided into three major parts: freeways, rural roads, and urban roads, three separate chapters for the peak-hour demand estimation will be provided. Whereas for freeways the task consists in finding the comparable site equipped with inductive loop detectors, for urban roads it is a matter of establishing which time periods of the year and weekdays are appropriate for manual short-term counts as estimation of the 30th hour of the year. For all kind of traffic devices the requirements on traffic demand models for level of service calculations are described.
The case study "Digital Test Area Autobahn" is presented. A new built (September 2016) pre-stressed concrete bridge is equipped with different monitoring systems for the detection of traffic load, climatic influence and the reaction of the bridge. Possibilities for the implementation of a VoI (Value of Information) analyses are presented.