Filtern
Erscheinungsjahr
- 2017 (3) (entfernen)
Dokumenttyp
Volltext vorhanden
- ja (3) (entfernen)
Schlagworte
- Dynamik (3) (entfernen)
Powered Two Wheeler (Motorcycle) crashes are overrepresented in EU, England, and United States casualty statistics for both fatal and serious injuries. While regional geographic differences are evident for motorcycle size, type, and engine displacement, the casualty statistics consistently indicate significantly higher injury rates for all motorcycle riders when compared to car occupants. Accident analysis and reconstruction of these motorcycle crashes is a necessary process to gain further understanding of potential injury mitigation strategies. This paper focuses on the analysis of the rider post impact trajectory in the immediate moments following a crash. The rider and motorcycle, while loosely coupled by seating position leading up to a crash, quickly decouple as the crash forces develop. As a result, the rider moves relative to the motorcycle and relative to the collision partner. This movement, or trajectory, is primarily influenced by the type and configuration of the impact, the type and configuration of the motorcycle and collision partner, and the speeds involved. Understanding the rider's post impact trajectory will assist in the development of injury mitigation strategies. Both the free flight trajectory of the rider and the rider's trajectory as influenced by interaction with the motorcycle and collision partner are examined. Rider trajectories in full scale crash testing and real world motorcycle crashes are both studied and presented. The resulting physical evidence that can be observed by an accident analyst is discussed. The application of projectile motion physics is analyzed and the necessary input parameters, such as initial launch angle, are studied. This study will assist in understanding the post-impact dynamics of a motorcyclist, and will provide useful information to analysts evaluating real world crashes.
An insgesamt zehn willkürlich ausgewählten Baustellen wurden Gussasphaltproben für Kontrollprüfungen entnommen. Gleichzeitig wurden unmittelbar auf den Baustellen Probekörper hergestellt, deren Mischgut nicht - wie bei Kontrollprüfungen üblich - ein zweites Mal erhitzt werden musste. Die Untersuchungen ergaben, dass keine signifikanten Unterschiede bei den statischen und dynamischen Eindringtiefen vorliegen, wenn die Gussasphalttemperaturen bei der Herstellung der Proben 210 -°C, 230 -°C oder 250 -°C betragen haben. Die bei einer Gussasphalttemperatur von 230 -°C hergestellten Proben weisen keine Unterschiede in ihrer Verformungsbeständigkeit auf, wenn die Proben bis zur Prüfung 24, 48 oder 96 Stunden gelagert waren. Das Ergebnis der Eindringtiefen (statisch und dynamisch) unterscheidet sich, ob die Proben unmittelbar auf der Baustelle hergestellt werden oder - wie bei den Kontrollprüfungen - nach nochmaligem Erhitzen der Gussasphaltmassen im Labor. Der Gussasphalt auf der Baustelle in Probenformen eingefüllt ist eindruckempfindlicher. Die Ergebnisse differenzieren um einen konstanten Faktor von 1,3 - 1,5. Insoweit kann das bisherige Verfahren bei Kontrollprüfungen NT-Gussasphalte in Schalen abgefüllt und abgekühlt zur Herstellung von Probewürfeln für ETstat oder Zylinder für ETdyn ins Labor zur bringen beibehalten werden. Man müsste nur die Grenzwerte für die Beurteilung der NT-Gussasphalte entsprechend festlegen. Das bisherige Verfahren, die Proben nicht direkt auf der Baustelle herzustellen, hat den großen Vorteil, dass keine Stromaggregate und Trockenschränke mitgeführt werden müssen, die in schwierigem Gelände unter freiem Himmel die Herstellung der Proben behindern und zu größeren Streuungen der Messergebnisse führen können. Die Messergebnisse der statischen Eindringtiefe nach 30 Minuten und der dynamischen Eindringtiefe nach 2500 Lastwechsel liegen auf derselben Höhe, wenn die Eindringtiefen sehr niedrig um und unter 1 mm liegen. Zwischen 1 und 2 mm statischer Eindringtiefe sind die dynamischen Eindringtiefen um das 2-3-fache höher. In Übereinstimmung mit DIN EN 13108-20 ist bei einer statischen Eindringtiefe unter 2,5 mm der Wert der dynamischen Eindringtiefe zu ermitteln, da eine deutlichere Differenzierung der Ergebnisse erreicht und die Verformungsbeständigkeit des Gussasphaltes in der Wärme damit besser angesprochen werden kann. Insoweit sind die national geltenden Vorschriften z.B. ZTV Asphalt-StB 07 und die TL Asphalt-StB 07 an die DIN EN anzupassen.
Whiplash injuries are characterized by the high variability of its symptoms and by the subjectivity of its diagnosis, which sometimes leads to frauds perpetrated by victims of rear-end impacts. It is estimated that whiplash injuries cost annually about 10.000 million Euros in Europe. Therefore, the aim of this study was to investigate the influence of the dynamics of the accident in which the victim was involved in the probability of development of whiplash associated injuries. In the presented methodology, first an accident reconstruction is performed where the dynamics of the accident is determined. This is carried out using the software PC-Crash, police and insurance companies' data. Then biomechanical injuries criteria related with whiplash injuries are evaluated. For the evaluation of the probability of having whiplash injuries, the Neck Injury Criterion (NIC) of the victim and the mean acceleration of the vehicle were evaluated. Then, with medical reports, the results of the accident reconstruction are correlated with the reported injuries. Some examples are presented. The results obtained indicate that the study of the dynamics of the road accidents in which the victims were involved could be used as an auxiliary of the prognosis of whiplash injuries and is important for a precise diagnosis of this type of injuries.