Filtern
Erscheinungsjahr
Dokumenttyp
Volltext vorhanden
- ja (61) (entfernen)
Schlagworte
- Geschwindigkeit (61) (entfernen)
Recent findings from real-world accident data have shown that fatality risks for pedestrians are substantially lower than generally reported in the traffic safety literature. One of the keys to this insight has been the large and random sample of car-to-pedestrian crashes available in the German In-Depth Accident Study (GIDAS). Another key factor has been the proper use of weight factors in order to adjust for outcome-based sampling bias in the accident data. However, a third factor, a priori of unknown importance, has not yet been properly analysed. This is the influence of errors in impact speed estimation. In this study, we derived a statistical model of the impact speed errors for pedestrian accidents present in the GIDAS database. The error model was then applied to investigate the effect of the estimation error on the pedestrian fatality risk as a function of car impact speed. To this end, we applied a method known as the SIMulation-EXtrapolation (SIMEX) method. It was found that the risk curve is fairly tolerant to some amount of random measurement error, but that it does become flattened. It is therefore important that the accident investigations and reconstructions are of high quality to assure that systematic errors are minimised and that the random errors are under control.
Among European Countries, Spain first issued a Standard, UNE 135900:2005, further updated in 2008, that deals with homologation and effectiveness evaluation of road restraint systems components designed to reduce harm for bikers impacting on them. An in depth analysis and critical review of this standard is reported in this paper. Beside a close examination of the standard requirements, numerical models of the crash test stated by the standard have been set up and simulated to study the effects of slight speed and approach angle variations on test results, remaining within tolerance gaps allowed by the standard. Model were validated against experimental data. Together with the expected increasing severity of the impact according with speed, a strong influence of approach angle on injury parameters was found. Possible improvements to the norm, in order to make it more robust, are suggested.
Accident data shows that the vast majority of pedestrian accidents involve a passenger car. A refined method for estimating the potential effectiveness of a technology designed to support the car driver in mitigating or avoiding pedestrian accidents is presented. The basis of the benefit prediction method consists of accident scenario information for pedestrian-passenger car accidents from GIDAS, including vehicle and pedestrian velocities. These real world pedestrian accidents were first reconstructed and the system effectiveness was determined by comparing injury outcome with and without the functionality enabled for each accident. The predictions from Volvo Cars" general Benefit Estimation Model are refined by including the actual system algorithm and sensing models for a relevant car in the simulation environment. The feasibility of the method is proven by a case study on a authentic technology; the Auto Brake functionality in Collision Warning with Full Auto Brake and Pedestrian Detection (CWAB-PD). Assuming the system is adopted by all vehicles, the Case Study indicates a 24% reduction in pedestrian fatalities for crashes where the pedestrians were struck by the front of a passenger car.
The aim of this study was to evaluate the performance and accuracy of Event Data Recorders (EDRs). The analysis was based on J-NCAP crash tests from 2006"2007, with the corresponding EDR datasets. The pre-crash velocity, maximum delta-V and delta-V versus time history data recorded in the EDRs were compared with the reliable crash test data. The difference between the EDR pre-crash velocity and the laboratory test speed was less than 4 percent. In contrast, in several cases the maximum delta-V and delta-V versus time history data obtained from the EDRs showed uncertainty of measurement in comparisons with the reliable delta-V data. The difference in maximum delta-V in these comparisons was more than 5 percent in 10 of 14 tests and more than 10 percent in 4 of 14 tests. The EDRs underestimated the maximum delta-V in almost all tests. It was also concluded that the calculated acceleration from the EDR delta-V versus time history data showed good agreement with the instrumented accelerometer signal during the collision in almost all tests.
In a first step, we have examined approximately 23 000 single vehicle accidents within the Austrian National Statistics database. In a second step, we considered 15% of all fatal "running off the road" accidents that occurred in Austria in 2003. As a result, two accident categories were specified; "leaving the road without preceding manoeuvre" and "leaving the road with preceding manoeuvre". These two categories can be basically characterised by the vehicle- heading angle and its velocity angle. In this report, we further suggest theoretical approaches for the dimensioning of a safety zone, an area adjacent to the road free of fixed objects or dangerous slopes. We also show the link between the two accident categories mentioned above and the real world accidents analysed in detail. These observations also form the basis for the required length for safety devices. Finally, we summarise accident avoidance strategies.
Relevant accident related factors : risk and frequencies of contributing to road traffic accidents
(2009)
In the course of the European Project TRACE (Traffic Accident Causation in Europe) an attempt was made to analyse the cause of road traffic accidents from a factors' point of view. By literature review the most important independent risk factors for traffic accidents were identified to be speed, alcohol intake, male gender, young age, cell phone use, and fatigue. However, the impact of an accident related factor also depends on its prevalence in traffic and accidents, respectively. Available to the Partners in the TRACE Project were different accident databases. Causally contributing factors found by accident investigations that are most often coded in accident databases are connected to unadapted speed and inattention. Taking into account the risk increase and the frequency of contribution to accidents the conclusion can be drawn that the most relevant factors for accident causation are: "alcohol", "speed", and "inattention and distraction".
The purpose of this work is to investigate the association between the injuries in motorcycle accident and the main accident configurations. The data were provided by a multicentric case-control study MAIDS regarding the risk of crash and injuries of motorcyclists. Chi-square test was used to evaluate the relationship between the variables and a logistic regression was performed to evaluate the association of injury severity with some variables supposed to be predictive factors. Lesive patterns characterized by internal haemorrhages are mainly associated with fronto-lateral crashes, above all in urban areas. Lacerations or abrasions, mainly reported in torso and lower extremities, are mostly associated with single crashes or accidents in queue also for crashes occurred to low speed (< 50 km/h). The severity of injuries is highly associated with impact speed, regardless of the crash configuration. Fractures and haemorrhages play an important role in determining the severity of injuries. The upper extremities are the most frequently traumatised anatomic areas.
Pedestrian accidents are one of the major concerns related with road accidents around the world. Portugal has one of the highest rates of pedestrian fatalities in Europe. In this paper an overview conditions were the pedestrian accidents occurred in Portugal is presented. In the last years, a project related with the pedestrian accidents has run in Portugal for the period 2004-2006 where 603 people died, 2097 have been severely injured and about 17000 slightly injured. Within this project all the pedestrian accidents in this period have been analysed providing global information about a wide range of aspects, since location, driver and pedestrian characteristics, weather and road conditions, among others. In addition, 50 in-depth accidents have been investigated and the data collected according the Pendant methodology. For this in-depth methodology detailed information about the accident has been collected, including injuries, vehicle damage, road conditions and road user- behaviour and actions. An accident reconstruction has been carried for each case including the determination of the speeds and driver actions, and the analysis of the contributing factors for the accident. Depending of the accident complexity, different methodologies have been used to analyse these accident, from the classical analytical equations such as Simms and Woods, to the use of detailed computational pedestrian models as those included in the commercial software- PC-Crash-® or Madymo-®. Also one of the goals of our investigation is the development of multibody models and methodologies for the reconstruction of pedestrian accidents. Some of these tools integrated in the commercial software Cosmos Motion-® are presented. The advantages of the different approaches are compared and discussed for some of the accidents investigated. With these tools the impact speed can be determined from the projection distance with analytical tools or PC-Crash-®, but more complex tools should be used to determine speed from the injuries, what is especially important for fatal accidents. The influence of the vehicle geometry and stiffness characteristics is another aspect analysed, where the influence of the vehicle stiffness has been determined using a combined multibody-finite elements approach within the software Madymo-®.
The national accident statistics demonstrate that the situation of passenger car side impacts is dominated by car to car accidents. Car side to pole impacts are relatively infrequent events. However the importance of car side to pole impacts is significantly increasing with fatal and seriously injured occupants. For the present study the German in-depth database GIDAS (German In-Depth-Accident Study) and the UK based database CCIS (Co-operative Crash Injury Study) were used. Two approaches were undertaken to better understand the scenario of car to pole impacts. The first part is a statistical analysis of passenger car side to pole impacts to describe the characteristics and their importance relevant to other types of impact and to get further knowledge about the main factors influencing the accident outcome. The second part contains a case by case review on passenger cars first registered 1998 onwards to further investigate this type of impact including regression analysis to assess the relationship between injury severity and pole impact relevant factors.
The Centre for Automotive Safety Research (formerly the Road Accident Research Unit) at the University of Adelaide in South Australia has a history of in-depth crash investigation going back to the 1970s. In recent years, our focus has been on studying factors that contribute to road crashes, with an emphasis on the role of road infrastructure. Our method involves crash notification by the South Australian Ambulance Service and detailed investigation of the crash scene usually before the crash-involved vehicles have been moved. This at-scene data collection is supplemented with police crash reports, Coroner- reports including autopsy findings for fatal crashes, case notes from hospitals for all injured persons, structured interviews with crash participants and witnesses, and computerised reconstruction of the events of the crash. One of the most notable research findings to emerge from our in-depth work has been the relationship between travelling speed and the risk of crash involvement. By comparing the calculated free speeds of crash-involved vehicles (cases) with the measured speeds of non-crash-involved vehicles travelling on the same roads at the same time of day (controls), we were able to establish that an exponential relationship exists between travelling speed and the likelihood of involvement in a casualty crash. This was the case for both metropolitan and rural areas. This research prompted the reduction of some speed limits in Australia, which has resulted in notable decreases in crash numbers. Another finding of interest in our recent investigation of 298 mostly daytime crashes in metropolitan Adelaide was that medical conditions make a sizeable contribution to the occurrence of road crashes. We found that almost half of the drivers, riders and pedestrians involved in the collisions had at least one pre-existing medical condition, and half of these individuals had two or more such conditions. We found that a medical condition was the direct causal factor in 13% of the casualty crashes investigated and accounted for 23% of all hospital admission or fatal crash outcomes. A follow-up study of all hospital admissions for road crashes in Adelaide is now going ahead to look further at this problem. The paper also describes studies looking specifically at pedestrian crashes. These include studies of the relationship between travelling speed and the risk of a fatal pedestrian crash, and studies utilising real crash data to validate headforms and test dummies used in the assessment of the safety of new vehicles in the event of a collision with a pedestrian.
The fact that ADAC Air Rescue handles approximately 4,000 road accident missions every year gave rise to set up an accident research programme for which ADAC Air Rescue provides its data. This data is of initial informational quality and will be supplemented by data from the police, experts, fire brigades as well as hospitals and forensic institutes. Although the number of cases is still rather low, certain tendencies can be identified. The causes for most accidents occur when joining or intersecting traffic, followed by speeding in road bends and tailgating. Many accidents involve HGV rear end collisions, often causing serious injuries, considerable damage and technical problems for the rescue operations. With regard to the various impact types, it has become obvious that most of the extremely serious injuries are inflicted during a passenger car side impact. In addition, access to and removal of trapped passengers is becoming more and more complicated, partly due to the increasing use of high-strength materials, and rescue operations tend to be more time consuming.
This study is aimed to investigate the correlations of impact conditions and dynamic responses with the injuries and injury severity of child pedestrians by accident reconstruction. For this purpose, the pedestrian accident cases were selected from Sweden and Germany with detailed information about injuries, accident cars, and accident environment. The selected accident cases were reconstructed using mathematical models of pedestrian and passenger car. The pedestrian models were generated based on the height, weight, and age of the pedestrian involved in accidents. The car models were built up based on the corresponding accident car. The impact speeds in simulations were defined based on the reported data. The calculated physical quantities were analyzed to find the correlation with injury outcomes registered in the accident database. The reconstruction approaches are discussed in terms of data collection, estimating vehicle impact speeds, pedestrian moving speeds and initial posture, secondary ground impact, validity of the mathematical models, as well as impact biomechanics.
Rollover scenarios in Europe
(2005)
Rollover accidents seem to be a rising problem in Europe and therefore the systematic of this accident scenario should be investigated. Based on statistical investigations on major European accident databases for different countries a series of 73 real world rollover accidents was analysed. These cases were reconstructed using PC-Crash and preliminary categorised using a modified USbased rollover classification. In a first step, the rollover events were reconstructed from the point of conflict to the vehicle- rest position. The vehicles kinematics as well as its linear and rotational velocities were derived. In a second step typical velocity characteristics as well as kinematics were identified and the events categorised according to these criteria. Based on these results four main categories were defined, covering all reconstructed accidents. This categorisation was based on mechanical parameters (rotatory and translator kinematical data of the vehicle). Significant differences can be seen for different scenarios for the "first phase of rollover".
This paper describes the methodology of In-Depth Investigation in Germany on the example of GIDAS (German In-Depth Accident Study). Since 1999 in Germany a joint project between FAT (Forschungsvereinigung Automobiltechnik or Automotive Industry Research Association) and BASt (Bundesanstalt für Straßenwesen or the Federal Road Research Institute) is being carried out in Hannover and Dresden. The methodology of this project is based on a statistically orientated procedure of data sampling (sampling plan, weighting factors). The paper describes the possibilities of such in-depth investigation on the results of the offered title. The accident cases were collected randomly within GIDAS at Hannover. There are more cases existing from previous investigation started in 1985 under the same methodology. The portion of rollovers can be established at 3.7% of all accidents with casualties in the year 2000. For the study 434 cases of car accidents with rollovers are used for a detail comprehensive analysis. The accidents happened in the years 1994 to 2000 in the Hannover area. The injury distribution will report about 741 occupants with rollover accident event. The presented paper will give an overview of the accident situations following in rollover movements of cars. The distributions of injury frequencies, injury severity AIS for the whole body and for the body regions of occupants will be presented and compared to technical details like the impact speed and the deformation pattern. The speed of the car was determined at the point of rollover and on the point of accident initiency. The characteristics of the kinematics followed in a rollover movement are analyzed and the major defined types of rollover will be shown in the paper. The paper will describe the possibilities of In-Depth Investigation methods for the approach of finding countermeasures on the example of car accidents with rollover and explaining the biomechanics of injuries in rollover movements.
In order to improve the protection of children transported in cars, within the CHILD programme (GR3D-CT2002-00791) real world road accidents are thoroughly analysed and then reconstructed in laboratory. Prior to comparing injury severities of real victims to physical parameter values measured on the dummies, the quality of the reconstructions is evaluated by experts who use their experience based on the investigation of numerous and various accidents. This paper presents a new tool aiming at better evaluating and validating accident reconstructions. It is based on statistical evaluation of vehicle deformations which gives weighing factors for every part of the car body structure finally leading to a specific Reconstruction Quality Score (RQS indicator). Furthermore, the reliability of this score, depending on the number of measured points, can be established. This tool includes a function aiming at adjusting the speed for a further reconstruction and at defining the launching speed and the pulse shape for complementary sled tests. Finally, the functions of the RQS software and database are presented.
This study updates previous IIHS studies comparing estimated delta Vs for crash tested vehicles to the distribution of estimated delta Vs in the National Automotive Sampling System (NASS) Crashworthiness Data System (CDS). The delta V estimates for 232 frontal crash tests at 64.4km/h into a deformable barrier with 40 percent overlap are compared with estimates from frontal offset crashes in the 1997-2004 NASS database. All delta V estimates were based on SMASH, the delta V estimating program used by NASS since 1997. Results indicated that for all vehicles tested by IIHS, SMASH delta Vs were, on average, 32 percent lower than impact speeds and about 28 percent lower than the expected delta V. Almost 80 percent of all real-world frontal crashes resulting in AIS 3+ injuries and just over 60 percent of all fatal crashes occur at or below the average estimated delta V calculated for crash tested vehicles.
Die Belastung der städtischen Atmosphäre mit Partikeln stellt derzeit eines der wichtigsten Probleme der Luftreinhaltung dar. In diesem Projekt wurden verschiedene innerstädtische Oberflächentypen auf ihre Fähigkeit hin untersucht, PM10-Partikel zu binden und somit die lokale Luftqualität zu verbessern. Die Quantifizierung des PM10-Bindungsvermögens erfolgte mittels der Depositionsgeschwindigkeit. Diese wurden über die Antimon-Konzentrationen im PM10 und in der trockenen Deposition bestimmt. Über einen Zeitraum von Ende 2007 bis Mitte 2009 wurden sechs Messstationen in Berlin und Karlsruhe betrieben. Die PM10-Probenahme und die Depositionserfassung erfolgten jeweils in einem 14-tägigen Intervall. Zusätzlich wurde an drei Standorten mit höherwüchsiger Vegetation die Staubauflage auf den Blättern bestimmt. An diesen Standorten erfolgte zudem eine Bestimmung der nassen Deposition. Durch kampagnenhafte Einsätze von Messfahrzeugen konnten über zusätzliche NOx- und PM10-Messungen drei Messstationen als deutlich verkehrsbeeinflusst klassifiziert werden. Die PM10-Konzentrationen und die Depositionsraten wurden an den Standorten mit höherwüchsiger Vegetation deutlich durch deren Belaubung beeinflusst, insbesondere erhöhte sich in einer Straßenschlucht die PM10-Konzentration während der Belaubung signifikant im Vergleich zu einem Referenzstandort. Als Ergebnisse wurden Depositionsgeschwindigkeiten zwischen 0,4 und 0,5 cm/s an den nicht verkehrsexponierten Stationen und zwischen 0,8 bis 1,3 cm/s an den verkehrsexponierten Stationen ermittelt. Für die Blattoberflächen wurden, bezogen auf den gesamten Kronenraum, Depositionsgeschwindigkeiten von zusätzlich 0,5 cm/s bestimmt. Als Folgerung für die Praxis kann abgeleitet werden, dass einerseits Bepflanzungen im straßennahen Raum die höchsten Filterpotenziale besitzen, andererseits muss auf eine ausreichende Durchlüftung geachtet werden.
Eine effiziente Glättebekämpfung setzt u. a. eine möglichst gleichmäßige Verteilung von Tausalzen in ausreichender Menge voraus. Eine Voraussetzung ist die richtige Eignung der Streumaschine für eine automatische, qualitätsgerechte Ausbringung der Tausalze. Die vorliegenden Anforderungen an Streumaschinen reichen dafür nicht aus. Eine gleichbleibende Streulage bei verschiedenen Streudichten und Fahrgeschwindigkeiten wird nicht gefordert und deshalb von den meisten Streumaschinentypen auch nicht erreicht. Die Streubilder ändern sich unter verschiedenen Einsatzbedingungen in der Praxis meist erheblich. Die Streufahrzeugführer müssen daher während des Einsatzes eine Nachregulierung vornehmen. Dafür müssen Erfahrungen beim Streufahrzeugführer vorhanden sein. Voraussetzung ist eine entsprechende Schulung. Bei Neubeschaffungen von Streumaschinen wird die Forderung nach einer automatischen Einhaltung einer Streubreite bzw. -streifenlage bei verschiedenen Streudichten und Fahrgeschwindigkeiten empfohlen. Einen wesentlichen Einfluss auf die Streubildqualität hat auch das eingesetzte Tausalz. Die Streumaschine muss für das genutzte Tausalz entsprechend justiert sein. Für die Beurteilung von Streubildern für die Feuchtsalzausbringung gab es bisher keine Verfahren zur quantitativen Bestimmung der Streustoffverteilung. Die Ergebnisse der Projektarbeit zeigen, dass die richtige Justierung der Streumaschine und der Einfluss des Fahrtwindes beim Ausbringen zwei wesentliche Einflussgrößen auf die Streustoffverteilung sind. Deshalb sollte die vorgenommene Justierung der Streustoffausbringung visuell bei Hinterherfahrt mit praxisgerechten Fahrgeschwindigkeiten beurteilt und gegebenenfalls korrigiert werden. Dieses Verfahren ist zwar subjektiv, wird jedoch für eine Einschätzung der Streubreite und -streifenlage als hinreichend genau angesehen. Für genauere objektive Beurteilungen wurden im Rahmen der Projektarbeit zwei neue Verfahren untersucht. Mit ihnen ist eine Beurteilung von Feuchtsalzstreubildern bei praxisgerechten Fahrgeschwindigkeiten möglich. Beim ersten Verfahren werden die Streustoffe über Gummimatten ausgebracht und anschließend abschnittsweise aufgesaugt. Beim zweiten Verfahren werden die Streustoffe direkt auf die Fahrbahn ausgebracht und anschließend zusammengekehrt. Anschließend werden die Streustoffe abschnittsweise aufgenommen und verwogen. Das erste Verfahren ist bei der Aufnahme der Streustoffe sehr genau. Es ist aber durch die Herstellung der Prüffläche mit den Gummimatten recht aufwändig, und der Einfluss der andersartigen Oberfläche der Gummimatten auf das Streubild konnte bisher nicht ermittelt werden. Die Durchführung des zweiten Verfahrens ist schneller zu realisieren. Das Zusammenkehren kann aber bei der Beurteilung von Feuchtsalzstreubildern zu größeren Fehlern führen, da zum einen Anteile der verwendeten Tausalzlösung in die Fahrbahn einziehen und zum anderen Teile der Tausalze aufgrund unzureichender Kehrung nicht erfasst werden können. Zur Feststellung der Wiederholbarkeit der Messergebnisse sind weitere Untersuchungen notwendig. Die Ergebnisse der durchgeführten Untersuchungen sind bereits mehrfach publiziert worden. Es wird empfohlen, diese Erkenntnisse auch in einer zu überarbeitenden TLG B3 oder in die vorgesehene Europäische Norm für Streumaschinen und in das Merkblatt für die Überprüfung von Streumaschinen einzuarbeiten. Bei einer breiten Umsetzung der Erkenntnisse durch Hersteller und Anwender wird ein qualitätsgerechteres und sparsameres Ausbringen von Streustoffen erwartet.
Verkehrsunfälle auf Außerortsstraßen sind im Gegensatz zu Unfällen auf Innerortsstraßen durch eine besonders hohe Unfallschwere gekennzeichnet. Daraus ergibt sich die Notwendigkeit, Ansätze für die Verbesserung der Verkehrssicherheit auf Außerortsstraßen durch bauliche oder nicht bauliche Umsetzungen zu finden, von denen es in Deutschland eine Reihe gibt. Einer dieser Ansatzpunkte ist die Durchsetzung der zulässigen Höchstgeschwindigkeit. Insbesondere bei einbahnig zweistreifigen Außerortsstraßen besitzt die Geschwindigkeit einen großen Einfluss auf die Verkehrssicherheit, da mit steigender Geschwindigkeit nicht nur die Unfallanzahl, sondern besonders die Unfallschwere steigt. Um auf das besorgniserregende Unfallgeschehen auf den Außerortsstraßen mit praktikablen Maßnahmen zu reagieren, hat die Bundesanstalt für Straßenwesen (BASt) 1996 in Abstimmung mit dem Bundesministerium für Verkehr, Bau und Stadtentwicklung (BMVBS) die Projektgruppe "Verbesserung der Verkehrssicherheit auf einbahnig zweistreifigen Außerortsstraßen" (Außerortsstraßensicherheit - AOSI) eingerichtet. Sie soll detaillierte Vorschläge zur kurz- und mittelfristigen Verbesserung der Verkehrssicherheit unterbreiten und deren Wirksamkeit in einem Großversuch (Vorher-Nachher-Untersuchung) auf ausgewählten Strecken überprüfen. Im Jahr 2004 wurde die TU Dresden im Rahmen der dritten Projektphase mit der Untersuchung der Auswirkungen von linienhaft angeordneten ortsfesten Geschwindigkeitsüberwachungsanlagen (AOSI - Teil 3) beauftragt. Es umfasste die vollständige Durchführung und Auswertung der Wirksamkeit dieses Maßnahmenpaketes der linienhaft angeordneten Überwachungsanlagen (OGÜ-Anlagen) und die Formulierung von Empfehlungen für den künftigen Einsatz. Inhalt der Studie waren eine Analyse des Geschwindigkeitsniveaus sowie Untersuchungen zum Unfallgeschehen auf den auf den AOSI-Streckenabschnitten im Vorher-Nachher-Vergleich sowie Akzeptanzuntersuchungen. Der Bericht fasst die Methodik aus diesem Projekt sowie aus den Untersuchungen zu den Strecken mit Überholfahrstreifen (UEFS) kurz zusammen. Die Ergebnisdarstellung beschränkt sich jedoch ausschließlich auf das Maßnahmenpaket der linienhaft, ortsfesten Geschwindigkeitsüberwachung, da die Untersuchungen zu den ÜFS-Strecken noch nicht abgeschlossen sind. Die Studie ergab, dass das Geschwindigkeitsniveau auf den untersuchten Abschnitten vor Inbetriebnahme der OGÜ-Anlagen mit teilweise bis zu 20 km/h erheblich über der zulässigen Geschwindigkeit lag. Durch die Inbetriebnahme verringerte sich das Geschwindigkeitsniveau auf allen Strecken in Richtung des zulässigen Niveaus. Querschnitte, bei denen vorher sehr hohe Überschreitungen gemessen wurden, hatten die größten Geschwindigkeitsrückgänge. Nach einiger Zeit der Gewöhnung (circa 2 Jahre) fand eine Harmonisierung der Geschwindigkeiten statt, sodass die Geschwindigkeitsdifferenzen vor und nach den OGÜ-Anlagen geringer wurden. Die Akzeptanzuntersuchungen zeigten, dass die Mehrheit der Befragten mit einem Einsatz solcher Anlagen zur Verbesserung der Verkehrssicherheit einverstanden ist. Einfluss auf die Akzeptanz haben die Streckengeometrie und die beschilderte zulässige Höchstgeschwindigkeit. Ohne Einfluss waren die Vorankündigung durch Hinweisschilder, das Alter und das Geschlecht der Kraftfahrer sowie die Häufigkeit der Streckennutzung. Bei der Unfalluntersuchung ergab sich, dass sowohl die Schwere als auch die Gesamtzahl der Unfälle durch die Durchsetzung der zulässigen Höchstgeschwindigkeit erheblich vermindert werden konnte. Die linienhafte Geschwindigkeitsüberwachung hat damit das Unfallrisiko auf solchen Abschnitten, die vorher durch ein besonders hohes Unfallgeschehen aufgefallen waren, zum Teil erheblich gesenkt. Weiterhin wurde das Kosten-Nutzen-Verhältnis der OGÜ-Anlagen auf den jeweiligen Strecken analysiert. Der Einsatz von OGÜ-Anlagen kann besonders auf Bestandsstrecken mit einem überhöhten Geschwindigkeitsniveau und einem linienhaft auffälligen Unfallgeschehen (besonders Fahrunfälle mit schweren Personenschäden) empfohlen werden. Ausprägungen der Streckencharakteristik, die auf einen Einsatz hindeuten, werden genannt und es werden Empfehlungen zur Umsetzung der Maßnahme gegeben.
Ziel der Studie war es, die Auswirkungen des Fahrens mit Tempomat auf das Fahrverhalten zu untersuchen. Tempomaten haben in Deutschland eine relativ große Verbreitung, die insgesamt bei 10 bis 20 % der Fahrzeuge liegt, in der Oberklasse sogar bei 50 %. Studien, mit denen man die Auswirkungen des Tempomaten auf das Fahrverhalten bewerten kann, liegen bislang nicht vor. Relativ gut untersucht ist dagegen der Abstandsregelautomat ACC (adaptive cruise control), der zusätzlich zur Geschwindigkeitsregelung auch einen sicheren Abstand zu voranfahrenden Fahrzeugen hält. Bei ACC ergeben sich neben positiven Veränderungen im Sinne einer besseren Einhaltung von Geschwindigkeitsbegrenzungen auch Hinweise, dass Fahrer langsamer auf Reize in der Umwelt reagieren, die eine Veränderung der Geschwindigkeit notwendig machen (zum Beispiel Geschwindigkeitsbegrenzungen, einsetzender Regen oder Nebel und so weiter). Weiter zeigen diese Studien, dass sich Fahrer mit ACC eher mit Nebenaufgaben beschäftigen, sodass die Spurhaltung verschlechtert wird. Da der Tempomat bei Strecken mit geringem Verkehrsaufkommen ähnlich wie ACC die Geschwindigkeitsregelung übernimmt, liegt die Vermutung nahe, dass sich auch für den Tempomat ähnliche negative Verhaltenswirkungen ergeben könnten. Um dies zu prüfen, wurde im Fahrsimulator des DLR mit Bewegungssimulation eine Studie durchgeführt, in der 11 Tempomat-Nutzer und 11 Novizen jeweils drei Fahrten durchführten, ohne System, mit Tempomat und mit ACC. Bei jeder Fahrt waren zwei Autobahnabschnitte und ein Stück Landstraße zu bewältigen, wobei die Geschwindigkeitsbegrenzungen wechselten, um so die Anpassungsreaktionen der Fahrer untersuchen zu können. Auf der Autobahn wurde ein Stau, auf Landstraße ein Stück mit Nebel eingeführt, um die Reaktionen auf weitere Umweltreize, die eine Anpassung der Geschwindigkeit erfordern, beobachten zu können. Schließlich wurden auf der Autobahn zwei Abschnitte mit Nebenaufgaben (eine visuelle Suchaufgabe) realisiert, um eine mögliche verstärkte Abwendung von der Fahraufgabe zu prüfen. Der Altersdurchschnitt der Fahrer lag bei 38 Jahren. Bei jeder Fahrt wurden das Fahrverhalten und physiologische Reaktionen (Herzrate) aufgezeichnet. Außerdem wurden Befragungen zum Befinden, der Beanspruchung beim Fahren und der Bewertung der Systeme durchgeführt. In den Bedingungen mit Tempomat oder ACC wurden die Probanden instruiert, diese Systeme auch möglichst zu nutzen. Dies führte zu Nutzungshäufigkeiten von ca. 90 % der Fahrtzeit. Insgesamt sind die Ergebnisse für Tempomat und ACC sehr ähnlich. Geschwindigkeitsbegrenzungen werden besser eingehalten. Es werden geringere maximale Geschwindigkeiten erreicht. Auch die Standardabweichung der Geschwindigkeit ist verringert, was zu einem besseren Verbrauch und Verkehrsfluss führen könnte. Die Abstände zu voranfahrenden Fahrzeugen verändern sich durch den Tempomat nicht. Bei ACC ist der Abstand vergrößert, was allerdings durch die spezielle Auslegung begründet sein könnte, die keine Anpassung zuließ. Wenn die Geschwindigkeit aufgrund von Geschwindigkeitsbegrenzungen oder Nebel reduziert werden musste, erfolgte dies mit Tempomat und ACC um circa 5 Sekunden verzögert. Offensichtlich mussten sich die Fahrer hier erst bewusst machen, dass sie eingreifen müssen und dass die Systeme diese Anpassung nicht leisten. Hinsichtlich eines möglichen Missbrauchs der Systeme ergaben sich in dieser Studie bei der Bearbeitung von Nebenaufgaben keine deutlichen Hinweise. Weder mit Tempomat noch mit ACC werden mehr Nebenaufgaben bearbeitet. Die negativen Effekte der Nebenaufgaben auf die Spurhaltung sind deutlich, aber in allen Bedingungen zu finden. Der einzige Hinweis auf eine Gefahr liegt darin, dass die Geschwindigkeit bei der Bearbeitung von Nebenaufgaben mit ACC und Tempomat nicht so stark verringert wird wie bei der Fahrt ohne Systeme. Ob dies das Unfallrisiko erhöht, ist mit der vorliegenden Studie nicht zu beantworten. Schließlich beurteilten die Fahrer beide Systeme positiv und waren der Meinung, dass die Fahrt dadurch sicherer und weniger anstrengend wird. Insgesamt führt damit das Fahren mit Tempomat hinsichtlich der mittleren Geschwindigkeit zu Veränderungen des Fahrverhaltens, die eher positiv zu bewerten sind. Auf der anderen Seite zeigen sich wie auch bei ACC Hinweise, dass eine Geschwindigkeitsanpassung mit System deutlich verzögert geschieht, was als vermindertes Situationsbewusstsein interpretiert werden kann. Wünschenswerte Erweiterungen der Funktionalität (zum Beispiel Anpassung an Verkehrszeichen) könnten diesen Effekt noch verstärken. Angesichts dieser Bedenken und der technischen Weiterentwicklungen sind weitere Studien dringend notwendig.