Filtern
Erscheinungsjahr
Dokumenttyp
Schlagworte
- Aktives Sicherheitssystem (28) (entfernen)
Institut
- Sonstige (28) (entfernen)
Aufgabe der Studie war es, die Ausstattung der Pkw in Deutschland mit Fahrzeugsicherheitssystemen umfassend zu erheben. Nach 2013 und 2015 hat infas die Studie in Zusammenarbeit mit dem Institut für Kraftfahrzeuge (ika) 2017/2018 erneut durchgeführt, um Veränderungen bei der Marktdurchdringung der Systeme festzustellen. Dazu wurden 5.207 Haushalte zur Ausstattung eines ihnen zur Verfügung stehenden Fahrzeugs befragt. Für die Befragung wurden insgesamt 59 Fahrzeugsicherheitssysteme ausgewählt. Die weiteste Verbreitung haben passive Sicherheitssysteme wie Airbags. Sowohl Front- als auch Seitenairbags gehören inzwischen zur Standardausstattung in allen Fahrzeugsegmenten. Neuere passive Systeme, insbesondere zum Fußgängerschutz, sind dagegen überwiegend in neueren Modellen der oberen Mittel- und Oberklasse vorhanden. Zur Fahrzeugausstattung gehören gleichzeitig aktive Systeme, die Risiken vermeiden oder einzelne Fahraufgaben übernehmen. Die häufigsten Vertreter aus dieser Gruppe sind Bremsassistent, ESP und Tempomat. Bereits über 80 Prozent der Fahrzeuge sind mit ESP ausgestattet, das seit 2011 gesetzlich vorgeschrieben ist. Auch die Tagfahrleuchte ist aufgrund einer EU-Richtlinie bereits in knapp der Hälfte aller Fahrzeuge verbaut und wird in Zukunft eine volle Marktdurchdringung erreichen. Zu den neuesten Entwicklungen gehören Systeme, die bereits den Automatisierungslevel 1 der Norm SAE J3016 aufweisen, wie der erweiterte ACC oder der Lenkassistent. Diese sind aufgrund der teuren und aufwendigen Technik jedoch bislang nur bei einem kleinen Teil der oberen Mittel- und Oberklasse sowie in Geländewagen/SUV zu finden. In den letzten Jahren nimmt besonders die Ausstattung im Segment SUV stark zu, so dass Fahrzeuge dieses Segments inzwischen bei vielen Systemen ähnlich hoch ausgestattet sind wie Fahrzeuge der oberen Mittel- und Oberklasse. Dies hängt auch mit der hohen Anzahl der Neuzulassungen in diesem Bereich zusammen. Die Anzahl der Sicherheitssysteme nimmt mit der jährlichen Fahrleistung und der Nutzungshäufigkeit ebenso zu wie bei jüngeren Fahrzeugen und Dienstwagen. Betrachtet man die Ausstattungsraten nach Fahrzeugsegmenten zeigt sich ein Muster: Sind Systeme insgesamt selten, unterscheiden sich die Anteile zwischen den verschiedenen Fahrzeugsegmenten teilweise erheblich.
Bisher liegt der Schwerpunkt der Forschungsaktivitäten im Bereich der automatisierten Fahrzeugführung auf generellen Automatisierungseffekten, die implizit einen fahrerfahrenen Fahrer annehmen. Welches Potenzial Fahrerassistenzsysteme und Fahrzeugautomatisierung für Fahrschüler und Fahranfänger während des Kompetenzerwerbs haben, ist bisher nicht ausreichend erforscht. Anhand einer Literaturrecherche und eines Expertenworkshops werden in diesem Bericht Forschungsfragen aus dem Bereich des Fahrkompetenzerwerbs im Kontext zunehmender Fahrzeugautomatisierung erarbeitet. Im Rahmen der Literaturrecherche werden zunächst relevante Begrifflichkeiten aus der Expertise- und Kompetenzforschung definiert (z.B. Experte, Experteneigenschaften) sowie allgemeingültige Modelle zum Expertise- und Kompetenzerwerb aufgeführt. Mit Hilfe dieser Grundlagen wird anschließend der Kompetenzerwerb konkret auf das Autofahren übertragen und der Prozess des Fahrkompetenzerwerbs (z.B. Lernbedingungen während der Fahrausbildung und des darauffolgenden selbstständigen Fahrens, Unfallgeschehen der Fahranfänger) betrachtet. Nach GASSER, SEECK und SMITH (2015) lassen sich Fahrerassistenzsysteme sowie die Stufen der Fahrzeugautomatisierung nach ihrer Wirkweise in drei grundlegende Funktionskategorien einteilen (Funktionen der Wirkweisen A, B und C). Heute verfügbare Systeme werden in diese drei grundlegenden Funktionskategorien eingeordnet. Schließlich werden in diesem Bericht Fahrkompetenz und Wirkweisen zusammengeführt: Für jede Wirkweise werden die bestehenden Anforderungen an den Fahrer und damit verbundene Erkenntnisse zum Erwerb und der Entwicklung von Fahrkompetenz dargestellt. Es stehen als Nutzergruppen die Fahrschüler und die Fahranfänger im Fokus. Als weitere Nutzergruppe werden fahrerfahrene Fahrer berücksichtigt. Der durchgeführte Expertenworkshop diente dazu, eine anwendungsbezogene Ergänzung zur Literaturanalyse zu schaffen. Mit Vertretern der Fahrlehrerverbände, der Forschung und fahrerfahrenen Fahrern wurden Fragen diskutiert, die sich für die Wirkweisen A, B und C im Zusammenhang mit dem Fahrkompetenzerwerb ergeben. Die Befunde der Literaturrecherche werden zusammen mit den Ergebnissen des Expertenworkshops zur Ableitung des Forschungsbedarfs herangezogen. Der Forschungsbedarf wird – strukturiert nach den Wirkweisen – für jede Nutzergruppe dargestellt. Für die Nutzergruppen allgemein (d. h. alle Fahrer) ergibt sich Forschungsbedarf bezüglich der Bestimmung des Trainingsbedarfs zum Erlernen des richtigen Umgangs mit Funktionen der Wirkweisen A bis C sowie der Entwicklung entsprechender Trainingskonzepte (Schwerpunkt: Wirkweise B). Die Entwicklung von Trainingskonzepten zur Deckung dieses Trainingsbedarfs sollte unter Berücksichtigung der Kompetenzen der einzelnen Nutzergruppen erfolgen. Weiterhin sollten in der Forschung zukünftig sowohl der Anforderungswandel an das Aufmerksamkeitsmanagement der Fahrer bei Nutzung von Funktionen der Wirkweise B als auch Veränderungen in der Kommunikation zwischen Verkehrsteilnehmern im künftigen Mischverkehr Berücksichtigung finden. Für die Nutzergruppe der Fahrschüler ergibt sich Forschungsbedarf bezüglich der kontinuierlichen Weiterentwicklung von Fahrausbildungs- und Fahrprüfungsinhalten für Funktionen der Wirkweisen A bis C. Für Funktionen der Wirkweisen A und B (Level 1) zeigt sich ein Potenzial zur Unterstützung des Kompetenzerwerbs beim Fahrenlernen, das zukünftig untersucht werden sollte. Von einem ausschließlichem Gebrauch von Funktionen der Wirkweise B während der Fahrschulausbildung sollte abgesehen werden, da potenziell ein Risiko des Nicht-Erwerbs von Fahrkompetenz besteht. Für die Nutzergruppe der Fahranfänger zeigt sich ein Potenzial zur Unterstützung des nach dem Fahrerlaubniserwerb andauernden Kompetenzerwerbs für Funktionen der Wirkweisen A und B (Level 1), welches zukünftig in der Forschung berücksichtigt werden sollte. Ähnlich wie bei der Gruppe der Fahrschüler besteht auch für Fahranfänger das potenzielle Risiko eines Nicht-Erwerbs von Fahrkompetenz bei ausschließlichem Gebrauch von Funktionen der Wirkweise B. Für die Nutzergruppe der fahrerfahrenen Fahrer ergibt sich zum einen Forschungsbedarf für die Bestimmung des notwendigen Trainingsumfangs für Funktionen der Wirkweisen A und B. Zum anderen sollte zukünftig in der Forschung die Relevanz möglicher Verschlechterungen psychomotorischer Fertigkeiten bei überdauernder Nutzung von Funktionen der Wirkweise B (hauptsächlich Level 2 und 3) berücksichtigt werden.
PROSPECT (Proactive Safety for Pedestrians and Cyclists) is a collaborative research project involving most of the relevant partners from the automotive industry (including important active safety vehicle manufacturers and tier-1 suppliers) as well as academia and independent test labs, funded by the European Commission in the Horizon 2020 research program. PROSPECT's primary goal is the development of novel active safety functions, to be finally demonstrated to the public in three prototype vehicles. A sound benefit assessment of the prototype vehicle's functionality requires a broad testing methodology which goes beyond what has currently been used. Since PROSPECT functions are developed to prevent accidents in intersections, a key aspect of the test methodology is the reproduction of natural driving styles on the test track with driving robots. For this task, data from a real driving study with subjects in a suburb of Munich, Germany was used. Further data from Barcelona will be available soon. The data suggests that intersection crossing can be broken down into five phases, two phases with straight deceleration / acceleration, one phase with constant radius and speed turning, and two phases where the bend is imitated or ended. In these latter phases, drivers mostly combine lateral and longitudinal accelerations and drive what is called a clothoid, a curve with curvature proportional to distance travelled, in order to change lateral acceleration smoothly rather than abrupt. The data suggests that the main parameter of the clothoid, the ratio distance travelled to curvature, is mostly constant during the intersections. This parameter together with decelerations and speeds allows the generation of synthetic robot program files for a reproduction of natural driving styles using robots, allowing a much greater reproducibility than what is possible with human test drivers. First tests show that in principle it is possible to use the driving robots for vehicle control in that manner; a challenge currently is the control performance of the robot system in terms of speed control, but it is anticipated that this problem will be solved soon. Further elements of the PROSPECT test methodology are a standard intersection marking to be implemented on the test track which allows the efficient testing of all PROSPECT test cases, standard mobile and light obstruction elements for quick reproduction of obstructions of view, and a concept for tests in realistic surroundings. First tests using the PROSPECT test methodology will be conducted over the summer 2017, and final tests of the prototype vehicles developed within PROSPECT will be conducted in early 2018
The advent of active safety systems calls for the development of appropriate testing methods. These methods aim to assess the effectivity of active safety systems based on criteria such as their capability to avoid accidents or lower impact speeds and thus mitigate the injury severity. For prospective effectivity studies, simulation becomes an important tool that needs valid models not only to simulate driving dynamics and safety systems, but also to resolve the collision mechanics. This paper presents an impact model which is based on solving momentum conservation equations and uses it in an effectivity study of a generic collision mitigation system in reconstructed real accidents at junctions. The model assumes an infinitely short crash duration and computes output parameters such as post-crash velocities, delta-v, force directions, etc. and is applicable for all impact collision configurations such as oblique, excentric collisions. Requiring only very little computational effort, the model is especially useful for effectivity studies where large numbers of simulations are necessary. Validation of the model is done by comparison with results from the widely used reconstruction software PC-Crash. Vehicles involved in the accidents are virtually equipped with a collision mitigation system for junctions using the software X-RATE, and the simulations (referred to as system simulations) are started sufficiently early before the collision occurred. In order to assess the effectivity, the real accident (referred to as baseline) is compared with the system simulations by computing the reduction of the impact speeds and delta-v.
For more than a decade, ADAC accident researchers have analysed road accidents with severe injuries, recording some 20,000 accidents. An important task in accident research is to determine the causative factors of road accidents. Apart from vehicle engineering and human factors, accident research also focuses on infrastructural and environmental aspects. To find out what accident scenarios are the most common in ADAC accident research and what driver assistance systems can prevent them, our first task was to conduct a detailed accident analysis. Using CarMaker, we performed a realistic simulation of accident scenarios, including crashes, with varying parameters. To begin with, we made an initial selection of driver assistance systems in order to determine those with the greatest accident prevention potential. One important finding of this study is that the safety potential of the individual driver assistance systems can actually be examined. It also turned out that active safety offers even much more potential for development and innovation than passive safety. At the same time, testing becomes more demanding, too, as new systems keep entering the market, many of them differing in functional details. ADAC will continue to test all driver assistance systems as realistically as possible so as to be able to provide advice to car buyers. Therefore, it will be essential to develop and improve test conditions and criteria.
Die vorliegende Studie liefert Ergebnisse zur Marktdurchdringung von Fahrzeugsicherheitssystemen im Jahr 2015. Wie bereits im Jahr 2013 wurde die Studie von infas und dem Institut fuer Kraftfahrzeuge (ika) durchgeführt. Dazu wurden 5.040 Haushalte zur Ausstattung eines ihnen zur Verfügung stehenden Fahrzeugs befragt und 56 Fahrzeugsicherheitssysteme ausgewählt. Neben den quantitativen Interviews wurden zwei Fokusgruppen mit Neu- bzw. Gebrauchtwagenkäufern durchgeführt. In der vorangegangenen Studie von 2013 wurden Experten befragt, die beruflich mit dem Ein- oder Verkauf von Pkw fuer Unternehmensflotten befasst sind. Die weiteste Verbreitung haben passive Sicherheitssysteme wie Airbags, die darauf abzielen, die Folgen eines Unfalls fuer die Beteiligten abzumildern. Aber auch aktive und intervenierende Systeme, die Risiken vermeiden oder einzelne Fahraufgaben übernehmen, gehören haeufig zur Fahrzeugausstattung. Die häufigsten Vertreter aus dieser Gruppe sind der Bremsassistent, ESP und der Tempomat. Die meisten Fahrzeugsicherheitssysteme sind in Fahrzeugen der oberen Mittelklasse und Oberklasse zu finden. Mit der jährlichen Fahrleistung und der Nutzungshäufigkeit nimmt die Anzahl der Systeme ebenso zu wie bei jüngeren Fahrzeugen und Dienstwagen. Die grössten Veränderungen gibt es im Segment der SUVs und Geländewagen. Hier steigt die Zahl der Neuzulassungen in den letzten Jahren deutlich und die Ergebnisse zeigen, dass diese Fahrzeuge häufig mit einer Vielzahl von Sicherheitssystemen ausgestattet sind. Die Ergebnisse aus der Vorgängerstudie zeigen, dass gewerbliche Fahrzeughalter solche Fahrzeugsicherheitssysteme in die Standardausstattung aufnehmen, deren Nutzen nachgewiesen ist. In der diesjährigen Studie wird deutlich, dass auch private Käufer Systeme insbesondere dann als sicherheitsrelevant und sinnvoll erachten, wenn sie durch den Gesetzgeber vorgeschrieben oder bereits seit längerer Zeit auf dem Markt etabliert sind. Es zeigt sich auch, dass insbesondere die eigene Erfahrung mit Sicherheitssystemen Vorurteile abbaut und zu einer positiven Einstellung gegenüber solchen Systemen führt.
The main focus of the benefit estimation of advanced safety systems with a warning interface by simulation is on the driver. The driver is the only link between the algorithm of the safety system and the vehicle, which makes the setup of a driver model for such simulations very important. This paper describes an approach for the use of a statistical driver model in simulation. It also gives an outlook on further work on this topic. The build-up process of the model suffices with a distribution of reaction times and a distribution of reaction intensities. Both were combined in different scenarios for every driver. Each scenario has then a specific probability to occur. To use the statistical driver model, every accident scene has to be simulated with each driver scenario (combinations of reaction times and intensities). The results of the simulations are then combined regarding the probabilities to occur, which leads to an overall estimated benefit of the specific system. The model works with one or more equipped participants and delivers a range for the benefit of advanced safety systems with warning interfaces.
For the estimation of the benefit and effect of innovative Driver Assistance Systems (DAS) on the collision positions and by association on the accident severity, together with the economic benefit, it becomes necessary to simulate and evaluate a variety of virtual accidents with different start values (e.g. initial speed). Taken into account the effort necessary for a manual reconstruction, only an automated crash computation can be considered for this task. This paper explains the development of an automated crash computation based on GIDAS. The focus will be on the design of the virtual vehicle models, the method of the crash computation as well as exemplary applications of the automated crash computation. For the first time an automated crash computation of passenger car accidents has been realized. Using the automated crash computation different tasks within the field of vehicle safety can be elaborated. This includes, for example, the calculation of specific accident parameters (such as EES or delta-V) for various accident constellations and the estimation of the economic benefit of DAS using IRFs (Injury Risk Functions).
The project UR:BAN "Cognitive assistance (KA)" aims at developing future assistance systems providing improved performance in complex city traffic. New state-of-the-art panoramic sensor technologies now allow comprehensive monitoring and evaluation of the vehicle environment. In order to improve protection of vulnerable road users such as pedestrians and cyclists, a particular objective of UR:BAN is the evaluation and prediction of their behaviour and actions. The objective of subproject "WER" is development support by providing quantitative estimates of traffic collisions at the very start and predict potential in terms of optimized accident avoidance and reduction of injury severity. For this purpose an integrated computer simulation toolkit is being devised based on real world accidents (GIDAS as well as video documented accidents), allowing the prediction of potential effectiveness and future benefit of assistance systems in this accident scenario. Subsequently, this toolkit may be used for optimizing the design of implemented assistance systems for improved effectiveness.
The evaluation of the expected benefit of active safety systems or even ideas of future systems is challenging because this has to be done prospectively. Beside acceptance, the predicted real-world benefit of active safety systems is one of the most important and interesting measures. Therefore, appropriate methods should be used that meet the requirements concerning representativeness, robustness and accuracy. The paper presents the development of a methodology for the assessment of current and future vehicle safety systems. The variety of systems requires several tools and methods and thus, a common tool box was created. This toolbox consists of different levels, regarding different aspects like data sources, scenarios, representativeness, measures like pre-crash-simulations, automated crash computation, single-case-analyses or driving simulator studies. Finally, the benefit of the system(s) is calculated, e.g. by using injury risk functions; giving the number of avoided/mitigated accidents, the reduction of injured or killed persons or the decrease of economic costs.