Filtern
Erscheinungsjahr
Dokumenttyp
- Buch (Monographie) (29)
- Konferenzveröffentlichung (16)
- Wissenschaftlicher Artikel (10)
- Bericht (4)
Schlagworte
- Rechenmodell (59) (entfernen)
In most of the existing highway capacity manuals, level of service (LOS) of freeway weaving segments and ramp junctions is traditionally defined by the speed, volume or density in critical areas of merge, diverge and weaving manoeuvres. In that traditional concept several capacity values of different critical areas (merge, diverge, weaving) as well as upstream and downstream basic freeway segments within the influence areas are evaluated separately. In this paper, a new model which considers the total segment of freeway merge, diverge, and weaving as an entire object is introduced. A combined volume-to-capacity ratio is used for defining the LOS of the total segment. According to the probability and queuing theory, the volume-to-capacity ratio of the whole segment can be considered as a combination of volume-to-capacity ratios in the different critical areas under consideration. The parameters of the new model can be calibrated with field data. Those parameters are functions of the number of lanes on the freeways, the number of lanes in the on-ramps or off-ramps, the length of the acceleration, deceleration, or weaving sections. Varying the model parameters the function can be fitted to the existing capacity models for different types of weaving segments or ramp junctions. With this model, the traffic quality (LOS) can be obtained directly as a function of the volumes on the freeway and on the on-ramp or off-ramp respectively. The new model has the following advantages: a) a uniform function for all types of freeway weaving segments and ramp junctions, b) traffic quality assessment for all critical areas under investigation in one step, and c) easy calibration. The new model will be incorporated into the new edition of the German Highway Capacity Manual (HBS 201X).
Although many German monitoring sites report declines of NOx concentrations, NO2-concentrations actually stagnate or even increase quite often. Various analyses have identified the altered compositions of nitrogen oxides (NO2/NOx-ratio) emitted by motor vehicles (resulting in an increase of primary NO2-emissions) as well as the chemical environmental conditions (mainly ground level ozone) as the main causes. The chemical conversion of NO to NO2 is often parameterized in dispersion calculations of exhaust emissions. A widely applied conversion model is the so-called Romberg approach from 1996. However, the Romberg approach has to be re-evaluated to accommodate the above-mentioned conditions. This article presents an adjustment to the Romberg approach in accordance with the measured data from 2000 to 2006, taking into consideration substantially higher NO2/NOx-ratios especially for higher NOx-concentrations. Model calculations with OSPM (Operational Street Pollution Model) including its internal chemistry module are able to reproduce very well the trends in the measured annual NO2-concentrations over a 10 year period. The relevant parameters for variations between the years are the NOx-emissions, primary NO2-emissions, ozone concentrations, wind conditions, and background concentrations. A simplified chemistry model based on annual mean NOx- and NO2-concentrations, and background ozone concentrations, as well as primary NO2-emissions is presented as a better method than the updated Romberg approach. This model simulates the annual mean NO2-concentrations much more accurately than the conventional and the updated Romberg approaches.
There is a need for detecting characteristics of pedestrian movement before car-pedestrian collisions to trigger a fully reversible pedestrian protection system. For this purpose, a pedestrian sensor system has been developed. In order to evaluate the effectiveness of the sensor system, the in-depth knowledge of car-pedestrian impact scenarios is needed. This study aims at the evaluation of the sensor system. The accident data are selected from the STRADA database. The accident scenarios available in this database were evaluated and the knowledge of the most common scenarios was developed in terms of the pedestrian trajectory, the pedestrian speed, the car trajectory, the car velocity, etc. A mathematical model was then established to evaluate the sensor system with different detective angles. It was found that in order to detect all the pedestrians in the most common scenarios on time the sensor detective angle must be kept larger than 60 degrees.
Die gegenwärtigen DIN-Fachberichte basieren auf den ENV-Fassungen der Eurocodes unter Berücksichtigung der nationalen Regelungen. Bis zur Einführung der Europäischen Normen mit den zugehörigen Nationalen Anwendungsdokumenten werden in Deutschland Brücken auf der Grundlage der DIN-Fachberichte 101 "Einwirkungen auf Brücken", 102 "Betonbrücken", 103 "Stahlbrücken" und 104 "Verbundstahlbrücken" in den Ausgaben 03:2009 berechnet, bemessen und konstruiert. Aus der Anwendung der DIN-Fachberichte für den Brückenbau seit 2003 liegen überwiegend positive Erfahrungen vor. Mit ihrer Anwendung wurde ein hoher Qualitätsstandard sicher gestellt. Insgesamt soll mit der Einführung der EN-Normen das bisher in Deutschland erreichte hohe Qualitätsniveau im Brückenbau gehalten werden. Das Schwerverkehrsaufkommen auf den Straßen in Deutschland ist in den letzten Jahrzehnten überproportional angewachsen, und auch für die Zukunft werden weitere Steigerungen prognostiziert. Die Festlegungen aktueller Verkehrslastmodelle für Straßenbrücken beruhen auf Messungen aus der Mitte der 1980er Jahre. Im Vergleich dazu wurde durch neuere Verkehrserfassungen eine Verdopplung des Schwerverkehrsaufkommens festgestellt. Aus diesem Grund war es erforderlich, die Verkehrslasten auf Straßenbrücken hinsichtlich des aktuellen und des zukünftigen Schwerverkehrs zu überprüfen und anzupassen. Mit der geplanten Einführung der Eurocodes im Brückenbau werden im Vergleich zu den derzeitigen Regelwerken neben Änderungen bei den Straßenverkehrslasten auch Anpassungen zu den jeweiligen Eurocodes für die Bemessung von Brücken vorgeschlagen, um das gebotene Sicherheitsniveau einerseits sowie die Wirtschaftlichkeit andererseits zu wahren. Im Rahmen mehrerer Forschungsvorhaben wurden die Auswirkungen dieser Änderungen für Beton-, Stahl- und Stahlverbundbrücken untersucht.
Autonomous Emergency Braking (AEB) systems for pedestrians have been predicted to offer substantial benefit. On this basis, consumer rating programmes, e.g. Euro NCAP, are developing rating schemes to encourage fitment of these systems. One of the questions that needs to be answered to do this fully, is to determine how the assessment of the speed reduction offered by the AEB is integrated with the current assessment of the passive safety for mitigation of pedestrian injury. Ideally, this should be done on a benefit related basis. The objective of this research was to develop a benefit based methodology for assessment of integrated pedestrian protection systems with pre-crash braking and passive safety components. A methodology has been developed which calculates the cost of pedestrian injury expected, assuming all pedestrians in the target population (i.e. pedestrians impacted by the front of a passenger car) are impacted by the car being assessed, taking into account the impact speed reduction offered by the car’s AEB (if fitted) and the passive safety protection offered by the car’s frontal structure. For rating purposes, this cost can be normalised by comparing it to the cost calculated for selected cars. The methodology uses the speed reductions measured in AEB tests to determine the speed at which each casualty in the target population will be impacted. The injury to each casualty is then calculated using the results from standard Euro NCAP pedestrian impactor tests and injury risk curves. This injury is converted into cost using ‘Harm’ type costs for the body regions tested. These costs are weighted and summed. Weighting factors were determined using accident data from Germany and GB and the results of a benefit analysis performed by the EU FP7 AsPeCSS project. This resulted in German and GB versions of the methodology. The methodology was used to assess cars with good, average and poor Euro NCAP pedestrian ratings, with and without a current AEB system fitted. It was found that the decrease in casualty injury cost achieved by fitting an AEB system was approximately equivalent to that achieved by increasing the passive safety rating from poor to average. Also, it was found that the assessment was influenced strongly by the level of head protection offered in the scuttle and windscreen area because this is where head impact occurs for a large proportion of casualties. The major limitation within the methodology is the assumption used implicitly during weighting. This is that the cost of casualty injuries to body areas, such as the thorax, not assessed by the headform and legform impactors, and other casualty injuries such as those caused by ground impact, are related linearly to the cost of casualty injuries assessed by the impactors. A methodology for assessment of integrated pedestrian protection systems was developed. This methodology is of interest to consumer rating programmes which wish to include assessment of these systems. It also raises the interesting issue if the head impact test area should be weighted to reflect better real-world benefit.
Females sustain Cervical Spine Distortion injury (CSD) more often than males. Most work dealing with the biomechanics background (e.g. injury mechanism/criteria) as well as the application in seat design/testing, focuses on the occupant model of an average male. Therefore the EU-Project ADSEAT (Adaptive Seat to Reduce Neck Injuries for Female and Male Occupants) is aimed at adding a female model for gender balanced research of CSD and improving seat design. An extensive literature review, searching for risk factors and injury criteria for males and females, was accompanied by the evaluation of different databases containing CSD cases. The database evaluations suggests that an anthropometry quite close to the 50%ile female anthropometry as known from crash test dummy design is appropriate. The results presented here form the basis for the future development of a computational female model and the improvement of seat design for better protection of both males and females in the frame of the ADSEAT-Project.
Im Rahmen der Erhaltung bestehender Straßen ist die Erfassung und Bewertung der Tragfähigkeit von großer Bedeutung. Zu deren Messung stehen statische, quasistatische und dynamische Verfahren zur Verfügung. Seit etwa 20 Jahren wird weltweit die dynamische Messmethode mit dem Falling Weight Deflectometer (FWD) angewendet. Die mit dem Falling Weight Deflectometer (FWD) gemessenen Deflexionen werden meistens unter vereinfachten Annahmen bezüglich der Last, der Materialgesetze für verschiedene Schichten und der dynamischen Effekte analysiert. Um einen Überblick über die wissenschaftlichen Veröffentlichungen zu erhalten, wurde eine Literaturstudie durchgeführt, aus der sich folgende Gliederung ergab: - Arbeits- und Wirkungsweise des FWD, - Rückrechnungsmethoden, - Interpretierbarkeit der FWD-Messergebnisse, - Vergleich verschiedener Rückrechnungsprogramme, - Vergleich verschiedener FWD-Geräte, - Vergleich FWD mit anderen Messverfahren, - Sonstiges. Ein Ergebnis dieser Literaturstudie ist, dass eine theoretische Analyse des FWD-Verfahrens, wie sie in diesem Forschungsvorhaben durchgeführt wurde, noch nicht existiert. Darüber hinaus wurde das FWD-Verfahren detailliert mathematisch-physikalisch analysiert. Anhand der mathematisch-physikalischen Analyse des FWD-Verfahrens wird deutlich, das die E-Moduli elasto-statisch zurückgerechnet werden können. Allerdings kann die Dämpfung ab einer Deflexion von etwa größer gleich 0,4 mm die Messergebnisse des Falling Weight Deflectometer beeinflussen. Wie sich die Dämpfung auf die Messergebnisse auswirkt müsste analysiert werden. Darüber hinaus konnte nachgewiesen werden, dass die Dispersion zu keiner nennenswerten Verfälschung der Impulsform führt. Des weiteren wurden Deflexions-, Einsenkungs- und Krümmungsmessungen auf ehemaligen Untersuchungsstrecken und auf Strecken aus den jungen Bundesländern durchgeführt. Anhand der Messergebnisse auf ehemaligen Untersuchungsstrecken wurden die Schicht-E-Moduli zurückgerechnet und interpretiert. Hierzu wurden folgende Programme verwendet: - Mehrschichtenprogramm, - FWD-Rückrechnungsprogramm, - PROBE90-Programm und - Finite-Element-Programm. Zur Überprüfung der Rückrechnungsergebnisse erfolgten Asphalt-E-Modul-Bestimmungen im Labor.
Eine Zielsetzung dieses Forschungsprojekts war es, die bisher im Entwurf des "Handbuchs für die Bewertung der Verkehrssicherheit" (HVS) aus dem Jahr 2008 für Strecken und Knotenpunkte von Landstraßen und Autobahnen gesetzten Werte für Grundunfallkostenraten (gUKR) und Zuschläge zu diesen Unfallkostenraten (zUKR) bei Abweichungen vom richtliniengerechten Ausbau durch praktische Anwendung zu überprüfen und gegebenenfalls Vorschläge für erforderliche Modifikationen zu unterbreiten. Dazu erfolgte eine beispielhafte Anwendung des standardisierten Verfahrens nach dem HVS-Entwurf 2008 zur Ermittlung von standardisierten Unfallkostenraten bei einer größeren Zahl von konkreten Planungsmaßnahmen, wobei auch die Praxistauglichkeit dieses Verfahrens beurteilt werden sollte. Darüber hinaus wurde im Rahmen des Forschungsprojekts ein zwischenzeitlich vorliegendes, auf der Basis von so genannten "Verallgemeinerten Linearen Modellen" (GLM) entwickelter Ansatz zur Abschätzung von standardisierten Unfallkostenraten von Landstraßen auf das Kollektiv der Autobahnen erweitert. Es zeigte sich, dass das standardisierte Verfahren des HVS-Entwurfs 2008 auf der Grundlage von strecken- und knotenpunktspezifischen Grundunfallkostenraten und Zuschlägen auf Grund nicht regelgerechter Planung nach einer gewissen Einarbeitungszeit für einen Planer, der Sicherheitsbewertungen durchführen soll, einfach anwendbar ist. Die Anwendung des Verfahrens bei den ausgewählten Planungsmaßnahmen zeigte, dass sehr niedrige Unfallkostenraten von sicheren Landstraßen und Autobahnen mit dem Modellansatz ebenso wenig abgebildet werden können wie sehr hohe Unfallkostenraten, wie sie bei Unfallhäufungsstellen beobachtet werden können. Die mit den entwickelten Modellansätzen ermittelten standardisierten Unfallkostenraten haben eine relativ schmale Bandbreite. Das standardisierte Verfahrensmodell des HVS-Entwurfs 2008 ist deshalb nicht geeignet, für einzelne Netzelemente das Unfallgeschehen zu prognostizieren, es dient vielmehr dazu, die Sicherheitswirkungen bestimmter Entwurfselemente, besser als bisher, quantitativ abzuschätzen. Die aus den Untersuchungen resultierenden konkreten Vorschläge für die Weiterentwicklung des Verfahrens sollen dem Arbeitsausschuss 2.13 "Verkehrssicherheitsbewertung von Straßen" der Forschungsgesellschaft für Straßen- und Verkehrswesen (FGSV) als Grundlage für die weiterführenden Beratungen dienen.
The first stage of the work has been to collate information on bridge assessment from the participating countries. In the later stages, the aim is to provide guidelines that reflect the current best practices, a methodology that will allow for future development and sufficient flexibility to accommodate variations in national priorities as the process of harmonisation is pursued. The following tasks fall within the scope of the project: (1) a review of current procedures and standards used for bridge assessment in Europe; (2) the development of models for taking into account the bridge specific traffic conditions and material properties; (3) the use of reliability methods based on a probabilistic approach for bridge assessment including the use of measurements for updating the reliability of structural elements; and (4) the provision of recommendations for methods and procedures that can be adopted for the assessment module of the management framework highlighting where further development will be beneficial.
The GIDAS-investigation team of Dresden (VUFO) has documented more than 11.500 accidents since 1999. The documentation of the accident includes beside vehicle-, injury- and environmental-data very detailed reconstruction data. Within this accident investigation the VUFO began to record the skid resistance of the accident site in 2009. The measurements are divided in macro- and microroughness (Sand depth method and Portable Skid Resistance Tester-SRT-by Munro-Stanley London-©). Both methods are used to determine the skid resistance for more than 1000 passenger cars. The aim of the present study is to find out a relationship between the measured skid resistance, the road conditions and the friction coefficient, which is used to calculate the maximum accelerations and decelerations during a reconstruction of an accident. Basic approach to convert the SRT-value into the friction coefficient is the calculation of the theoretical absorbed energy of the spring rubber system of the swinging arm of lever. This absorbed energy is used to get the friction coefficient by using the equations for the work of friction. To consider the road-behavior, in correlation to the friction coefficient, the results will be merged with existing literature. Last step for this study will be a comparison between actual used friction coefficients all over the GIDAS-database and the theoretical results. The study shows, if it is possible to use the SRT-Measurement for the estimation of a friction coefficient for the reconstruction of a traffic accident. As expected, the GIDAS-Database and the additional measurement of the roughness of the road directly on the spot are an enormous useful dataset.